Cyber · Trackr The Free Compliance Library
⌘K
DoD Compliance · STIG

Windows Server 2012 / 2012 R2 Member Server Security Technical Implementation Guide

V1R5 · · · Released 28 Oct 2014 · 373 rules
Compare

Pick two releases to diff their requirements.

View

Open a previous version of this STIG.

The Windows Server 2012 / 2012 R2 Member Server Security Technical Implementation Guide (STIG) is published as a tool to improve the security of Department of Defense (DoD) information systems. Comments or proposed revisions to this document should be sent via e-mail to the following address: disa.letterkenny.FSO.mbx.stig-customer-support-mailbox@mail.mil.
Sort by
b
Server systems must be located in a controlled access area, accessible only to authorized personnel.
CM-6 - Medium - CCI-000366 - V-1070 - SV-52838r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-00-000001
Vuln IDs
  • V-1070
Rule IDs
  • SV-52838r1_rule
Inadequate physical protection can undermine all other security precautions utilized to protect the system. This can jeopardize the confidentiality, availability, and integrity of the system. Physical security is the first line of protection of any system.PECF-1
Checks: C-47155r1_chk

Verify servers are located in controlled access areas that are accessible only to authorized personnel. If systems are not adequately protected, this is a finding.

Fix: F-45764r1_fix

Ensure servers are located in secure, access-controlled areas.

b
Shared user accounts must not be permitted on the system.
IA-2 - Medium - CCI-000764 - V-1072 - SV-52839r1_rule
RMF Control
IA-2
Severity
M
CCI
CCI-000764
Version
WN12-00-000012
Vuln IDs
  • V-1072
Rule IDs
  • SV-52839r1_rule
Shared accounts (accounts where two or more people log in with the same user identification) do not provide adequate identification and authentication. There is no way to provide for nonrepudiation or individual accountability for system access and resource usage.IAGA-1
Checks: C-47156r2_chk

Determine whether any shared accounts exist. If no shared accounts exist, this is NA. If shared accounts exist, this is a finding.

Fix: F-45765r1_fix

Remove any shared accounts from the system.

c
Systems must be maintained at a supported service pack level.
SI-2 - High - CCI-002605 - V-1073 - SV-53189r1_rule
RMF Control
SI-2
Severity
H
CCI
CCI-002605
Version
WN12-GE-000001
Vuln IDs
  • V-1073
Rule IDs
  • SV-53189r1_rule
Systems at unsupported service packs or releases will not receive security updates for new vulnerabilities, which leaves them subject to exploitation. Systems must be maintained at a service pack level supported by the vendor with new security updates.VIVM-1
Checks: C-47495r1_chk

Run "winver.exe". If the "About Windows" dialog box does not display "Microsoft Windows Server Version 6.2 (Build 9200)" or greater, this is a finding. No preview versions will be used in a production environment. Unsupported Service Packs/Releases: Windows 2012 - any release candidates or versions prior to the initial release.

Fix: F-46115r1_fix

Update the system to a supported release or service pack level.

c
An approved DoD antivirus program must be installed and used.
CM-6 - High - CCI-000366 - V-1074 - SV-52103r1_rule
RMF Control
CM-6
Severity
H
CCI
CCI-000366
Version
WN12-GE-000002
Vuln IDs
  • V-1074
Rule IDs
  • SV-52103r1_rule
Virus scan programs are a primary line of defense against the introduction of viruses and malicious code that can destroy data and even render a computer inoperable. Utilizing a virus scan program provides the ability to detect malicious code before extensive damage occurs.If another recognized antivirus product is installed, this would still be a finding; however, the severity code may be reduced to a CAT III.ECVP-1
Checks: C-46920r1_chk

If one of the following products is not installed and supported at an appropriate maintenance level, this is a finding: McAfee VirusScan Enterprise Version 8.8 Patch 3 or later Symantec Endpoint Protection (SEP) 12.1 Release Update 2 or later

Fix: F-45128r1_fix

Install DoD-approved virus scanning software.

a
The shutdown option must not be available from the logon dialog box.
CM-6 - Low - CCI-000366 - V-1075 - SV-52840r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-SO-000073
Vuln IDs
  • V-1075
Rule IDs
  • SV-52840r1_rule
Displaying the shutdown button may allow individuals to shut down a system anonymously. Only authenticated users should be allowed to shut down the system. Preventing display of this button in the logon dialog box ensures that individuals who shut down the system are authorized and tracked in the system's Security event log.ECSC-1
Checks: C-47157r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: ShutdownWithoutLogon Value Type: REG_DWORD Value: 0

Fix: F-45766r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Shutdown: Allow system to be shutdown without having to log on" to "Disabled".

a
System-level information must be backed up per organization defined frequency consistent with recovery time and recovery point objectives.
CM-6 - Low - CCI-000366 - V-1076 - SV-52841r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-00-000014
Vuln IDs
  • V-1076
Rule IDs
  • SV-52841r1_rule
Operating system backup is a critical step in maintaining data assurance and availability. System-level information includes system-state information, operating system and application software, and licenses. Backups must be consistent with organizational recovery time and recovery point objectives.CODB-1
Checks: C-47158r1_chk

Determine whether system-level information is backed up to meet organizational recovery time and recovery point objectives. If system-level information is not backed up per organization defined frequency consistent with recovery time and recovery point objectives, this is a finding.

Fix: F-45767r1_fix

Implement system-level information backups per organization defined frequency to support recovery time and recovery point objectives.

b
Global object access auditing of the file system must be configured to record failures.
AU-12 - Medium - CCI-000172 - V-1080 - SV-52842r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000114
Vuln IDs
  • V-1080
Rule IDs
  • SV-52842r1_rule
Improper modification of system files can have a significant impact on the security configuration of a system, as well as potentially rendering a system inoperable. Failed access attempts may indicate an attack on a system. Auditing for failed access attempts provides an indicator of such attempts and a method of determining responsible parties.ECAR-3, ECAR-2, ECAR-1
Checks: C-47159r2_chk

If "Object Access -> File System" auditing is not properly configured (V-26544), or if drives are not formatted with NTFS (V-1081), this is a finding. If "Global Object Access Auditing" of the file system has not been configured to audit all failed access attempts for the "Everyone" group, this is a finding. Use the AuditPol tool to review the current configuration. Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "Auditpol /resourceSACL /type:File /view". ("File" in the /type parameter is case sensitive). The following results should be displayed: Entry: 1 Resource Type: File User: Everyone Flags: Failure Condition: <null> Accesses: FILE_READ_DATA FILE_WRITE_DATA FILE_APPEND_DATA FILE_READ_EA FILE_WRITE_EA FILE_EXECUTE FILE_DELETE_CHILD FILE_READ_ATTRIBUTES FILE_WRITE_ATTRIBUTES DELETE READ_CONTROL WRITE_DAC WRITE_OWNER The command was successfully executed.

Fix: F-45768r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Global Object Access Auditing -> "File system" with the following: Principal: Everyone Type: Fail Permissions: all categories selected If this is configured on a domain controller, in local or group policy, do not set any conditions limiting the scope.

c
Local volumes must be formatted using NTFS.
AC-3 - High - CCI-000213 - V-1081 - SV-52843r1_rule
RMF Control
AC-3
Severity
H
CCI
CCI-000213
Version
WN12-GE-000005
Vuln IDs
  • V-1081
Rule IDs
  • SV-52843r1_rule
The ability to set access permissions and auditing is critical to maintaining the security and proper access controls of a system. To support this, volumes must be formatted using the NTFS file system.ECCD-1, ECCD-2
Checks: C-47160r2_chk

Open the Computer Management Console. Expand the "Storage" object in the Tree window. Select the "Disk Management" object. If the file system column does not indicate "NTFS" as the file system for each local hard drive, this is a finding. Some hardware vendors create a small FAT partition to store troubleshooting and recovery data. No other files must be stored here. This must be documented with the IAO.

Fix: F-45769r1_fix

Format all partitions/drives to use NTFS.

b
Global object access auditing of the registry must be configured to record failures.
AU-12 - Medium - CCI-000172 - V-1088 - SV-52844r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000116
Vuln IDs
  • V-1088
Rule IDs
  • SV-52844r1_rule
Improper modification of the registry can have a significant impact on the security configuration of a system, as well as potentially rendering a system inoperable. Failed access attempts may indicate an attack on a system. Auditing for failed access attempts provides an indicator of such attempts and a method of determining responsible parties.System AdministratorECAR-3
Checks: C-47161r2_chk

If "Object Access -> Registry" auditing is not properly configured (V-26545), this is a finding. If "Global Object Access Auditing" of the registry has not been configured to audit all failed access attempts for the "Everyone" group, this is a finding. Use the AuditPol tool to review the current configuration. Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "Auditpol /resourceSACL /type:Key /view". ("Key" in the /type parameter is case sensitive). The following results should be displayed: Entry: 1 Resource Type: Key User: Everyone Flags: Failure Condition <null> Accesses: KEY_ALL_ACCESS

Fix: F-45770r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Global Object Access Auditing -> "Registry" with the following: Principal: Everyone Type: Fail Permissions: all categories selected

b
The required legal notice must be configured to display before console logon.
AC-8 - Medium - CCI-000048 - V-1089 - SV-52845r1_rule
RMF Control
AC-8
Severity
M
CCI
CCI-000048
Version
WN12-SO-000022
Vuln IDs
  • V-1089
Rule IDs
  • SV-52845r1_rule
Failure to display the logon banner prior to a logon attempt will negate legal proceedings resulting from unauthorized access to system resources.ECWM-1
Checks: C-47162r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: LegalNoticeText Value Type: REG_SZ Value: See message text below You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details. Any OS versions that do not support the full text version must state the following: "I've read & consent to terms in IS user agreem't." Deviations are not permitted except as authorized by the Deputy Assistant Secretary of Defense for Information and Identity Assurance.

Fix: F-45771r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Interactive Logon: Message text for users attempting to log on" to the following: You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.

a
Caching of logon credentials must be limited.
CM-6 - Low - CCI-000366 - V-1090 - SV-52846r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-SO-000024
Vuln IDs
  • V-1090
Rule IDs
  • SV-52846r1_rule
The default Windows configuration caches the last logon credentials for users who log on interactively to a system. This feature is provided for system availability reasons, such as the user's machine being disconnected from the network or domain controllers being unavailable. Even though the credential cache is well protected, storing encrypted copies of users' passwords on workstations does not always have the same physical protection required for domain controllers. If a workstation is attacked, an unauthorized individual may isolate the password to a domain user account using a password-cracking program and gain access to the domain.ECSC-1
Checks: C-47163r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows NT\CurrentVersion\Winlogon\ Value Name: CachedLogonsCount Value Type: REG_SZ Value: 4 (or less)

Fix: F-45772r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Interactive Logon: Number of previous logons to cache (in case domain controller is not available)" to "4" logons or less.

c
Anonymous enumeration of shares must be restricted.
SC-4 - High - CCI-001090 - V-1093 - SV-52847r1_rule
RMF Control
SC-4
Severity
H
CCI
CCI-001090
Version
WN12-SO-000052
Vuln IDs
  • V-1093
Rule IDs
  • SV-52847r1_rule
Allowing anonymous logon users (null session connections) to list all account names and enumerate all shared resources can provide a map of potential points to attack the system.ECSC-1, PRNK-1
Checks: C-47164r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\Lsa\ Value Name: RestrictAnonymous Value Type: REG_DWORD Value: 1

Fix: F-45773r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network access: Do not allow anonymous enumeration of SAM accounts and shares" to "Enabled".

b
The number of allowed bad logon attempts must meet minimum requirements.
AC-7 - Medium - CCI-000044 - V-1097 - SV-52848r1_rule
RMF Control
AC-7
Severity
M
CCI
CCI-000044
Version
WN12-AC-000002
Vuln IDs
  • V-1097
Rule IDs
  • SV-52848r1_rule
The account lockout feature, when enabled, prevents brute-force password attacks on the system. The higher this value is, the less effective the account lockout feature will be in protecting the local system. The number of bad logon attempts must be reasonably small to minimize the possibility of a successful password attack, while allowing for honest errors made during a normal user logon.ECLO-1, ECLO-2
Checks: C-47165r2_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Account Policies -> Account Lockout Policy. If the "Account lockout threshold" is "0" or more than "3" attempts, this is a finding.

Fix: F-45774r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Account Policies -> Account Lockout Policy -> "Account lockout threshold" to "3" or less invalid logon attempts (excluding "0" which is unacceptable).

b
The period of time before the bad logon counter is reset must meet minimum requirements.
AC-7 - Medium - CCI-000044 - V-1098 - SV-52849r1_rule
RMF Control
AC-7
Severity
M
CCI
CCI-000044
Version
WN12-AC-000003
Vuln IDs
  • V-1098
Rule IDs
  • SV-52849r1_rule
The account lockout feature, when enabled, prevents brute-force password attacks on the system. This parameter specifies the period of time that must pass after failed logon attempts before the counter is reset to 0. The smaller this value is, the less effective the account lockout feature will be in protecting the local system.ECLO-2, ECLO-1
Checks: C-47166r2_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Account Policies -> Account Lockout Policy. If the "Reset account lockout counter after" value is less than "60" minutes, this is a finding.

Fix: F-45775r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Account Policies -> Account Lockout Policy -> "Reset account lockout counter after" to at least "60" minutes.

b
The lockout duration must be configured to require an administrator to unlock an account.
AC-7 - Medium - CCI-002238 - V-1099 - SV-52850r1_rule
RMF Control
AC-7
Severity
M
CCI
CCI-002238
Version
WN12-AC-000001
Vuln IDs
  • V-1099
Rule IDs
  • SV-52850r1_rule
The account lockout feature, when enabled, prevents brute-force password attacks on the system. This parameter specifies the period of time that an account will remain locked after the specified number of failed logon attempts. A value of 0 will require an administrator to unlock the account.ECLO-1, ECLO-2
Checks: C-47167r2_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Account Policies -> Account Lockout Policy. If the "Account lockout duration" is not set to "0", requiring an administrator to unlock the account, this is a finding.

Fix: F-45776r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Account Policies -> Account Lockout Policy -> "Account lockout duration" to "0" minutes, "Account is locked out until administrator unlocks it".

c
Unauthorized accounts must not have the Act as part of the operating system user right.
AC-6 - High - CCI-002235 - V-1102 - SV-52108r1_rule
RMF Control
AC-6
Severity
H
CCI
CCI-002235
Version
WN12-UR-000003
Vuln IDs
  • V-1102
Rule IDs
  • SV-52108r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Act as part of the operating system" user right can assume the identity of any user and gain access to resources that user is authorized to access. Any accounts with this right can take complete control of a system.If an application requires this user right, this can be downgraded to a CAT III if the following conditions are met: Vendor documentation must support the requirement for having the user right. The requirement must be documented with the IAO. The application account must meet requirements for application account passwords, such as length (V-36661) and required changes frequency (V-36662).ECLP-1
Checks: C-46925r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment. If any accounts or groups (to include administrators), are granted the "Act as part of the operating system" user right, this is a finding.

Fix: F-45133r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Act as part of the operating system" to be defined but containing no entries (blank).

b
The maximum password age must meet requirements.
IA-5 - Medium - CCI-000199 - V-1104 - SV-52851r1_rule
RMF Control
IA-5
Severity
M
CCI
CCI-000199
Version
WN12-AC-000005
Vuln IDs
  • V-1104
Rule IDs
  • SV-52851r1_rule
The longer a password is in use, the greater the opportunity for someone to gain unauthorized knowledge of the passwords. Scheduled changing of passwords hinders the ability of unauthorized system users to crack passwords and gain access to a system.IAIA-1, IAIA-2
Checks: C-47168r2_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Account Policies -> Password Policy. If the value for the "Maximum password age" is greater than "60" days, this is a finding. If the value is set to "0" (never expires), this is a finding.

Fix: F-45777r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Account Policies -> Password Policy -> "Maximum password age" to "60" days or less (excluding "0" which is unacceptable).

b
The minimum password age must meet requirements.
IA-5 - Medium - CCI-000198 - V-1105 - SV-52852r1_rule
RMF Control
IA-5
Severity
M
CCI
CCI-000198
Version
WN12-AC-000006
Vuln IDs
  • V-1105
Rule IDs
  • SV-52852r1_rule
Permitting passwords to be changed in immediate succession within the same day allows users to cycle passwords through their history database. This enables users to effectively negate the purpose of mandating periodic password changes.IAIA-2, IAIA-1
Checks: C-47169r2_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Account Policies -> Password Policy. If the value for the "Minimum password age" is set to "0" days ("Password can be changed immediately."), this is a finding.

Fix: F-45778r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Account Policies -> Password Policy -> "Minimum password age" to at least "1" day.

b
The password uniqueness must meet minimum requirements.
IA-5 - Medium - CCI-000200 - V-1107 - SV-52853r1_rule
RMF Control
IA-5
Severity
M
CCI
CCI-000200
Version
WN12-AC-000004
Vuln IDs
  • V-1107
Rule IDs
  • SV-52853r1_rule
A system is more vulnerable to unauthorized access when system users recycle the same password several times without being required to change to a unique password on a regularly scheduled basis. This enables users to effectively negate the purpose of mandating periodic password changes.IAIA-1, IAIA-2
Checks: C-47170r2_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Account Policies -> Password Policy. If the value for "Enforce password history" is less than "5" passwords remembered, this is a finding.

Fix: F-45779r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Account Policies -> Password Policy -> "Enforce password history" to "5" (or more) passwords remembered.

a
Outdated or unused accounts must be removed from the system or disabled.
AC-2 - Low - CCI-000017 - V-1112 - SV-52854r1_rule
RMF Control
AC-2
Severity
L
CCI
CCI-000017
Version
WN12-GE-000014
Vuln IDs
  • V-1112
Rule IDs
  • SV-52854r1_rule
Outdated or unused accounts provide penetration points that may go undetected. Inactive accounts must be deleted if no longer necessary or, if still required, disabled until needed.IAAC-1
Checks: C-47171r2_chk

Run the DUMPSEC utility. Select "Dump Users as Table" from the "Report" menu. Select the following fields, and click "Add" for each entry: UserName SID LastLogonTime AcctDisabled Review the "LastLogonTime". If any enabled accounts have not been logged into within the past 35 days, this is a finding. The following accounts are exempt: Built-in administrator account (SID ending in 500) Built-in guest account (SID ending in 501) Application accounts Disabled accounts The following PowerShell command may be used on domain controllers to list inactive accounts: Search-ADAccount -AccountInactive -UsersOnly -TimeSpan 35.00:00:00 Review the list to determine the validity for each account reported.

Fix: F-45780r1_fix

Regularly review accounts to determine if they are still active. Remove or disable accounts that have not been used in the last 35 days.

b
The built-in guest account must be disabled.
IA-8 - Medium - CCI-000804 - V-1113 - SV-52855r1_rule
RMF Control
IA-8
Severity
M
CCI
CCI-000804
Version
WN12-SO-000003
Vuln IDs
  • V-1113
Rule IDs
  • SV-52855r1_rule
A system faces an increased vulnerability threat if the built-in guest account is not disabled. This account is a known account that exists on all Windows systems and cannot be deleted. This account is initialized during the installation of the operating system with no password assigned.IAAC-1
Checks: C-47172r2_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options. If the value for "Accounts: Guest account status" is not set to "Disabled", this is a finding.

Fix: F-45781r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Accounts: Guest account status" to "Disabled".

b
The built-in guest account must be renamed.
CM-6 - Medium - CCI-000366 - V-1114 - SV-52856r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-SO-000006
Vuln IDs
  • V-1114
Rule IDs
  • SV-52856r1_rule
The built-in guest account is a well-known user account on all Windows systems and, as initially installed, does not require a password. This can allow access to system resources by unauthorized users. Renaming this account to an unidentified name improves the protection of this account and the system.IAAC-1
Checks: C-47173r2_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options. If the value for "Accounts: Rename guest account" is not set to a value other than "Guest", this is a finding.

Fix: F-45782r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Accounts: Rename guest account" to a name other than "Guest".

b
The built-in administrator account must be renamed.
CM-6 - Medium - CCI-000366 - V-1115 - SV-52857r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-SO-000005
Vuln IDs
  • V-1115
Rule IDs
  • SV-52857r1_rule
The built-in administrator account is a well-known account subject to attack. Renaming this account to an unidentified name improves the protection of this account and the system.IAAC-1
Checks: C-47174r2_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options. If the value for "Accounts: Rename administrator account" is not set to a value other than "Administrator", this is a finding.

Fix: F-45783r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Accounts: Rename administrator account" to a name other than "Administrator".

b
The system must not boot into multiple operating systems (dual-boot).
CM-6 - Medium - CCI-000366 - V-1119 - SV-52858r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-GE-000010
Vuln IDs
  • V-1119
Rule IDs
  • SV-52858r1_rule
Allowing a system to boot into multiple operating systems (dual-booting) may allow security to be circumvented on a secure system.ECSC-1
Checks: C-47175r2_chk

Verify the local system boots directly into Windows. Open Control Panel. Select "System". Select the "Advanced System Settings" link. Select the "Advanced" tab. Click the "Startup and Recovery" Settings button. If the drop-down list box "Default operating system:" shows any operating system other than Windows Server 2012, this is a finding.

Fix: F-45784r1_fix

Ensure Windows Server 2012 is the only operating system installed for the system to boot into. Remove alternate operating systems.

b
FTP servers must be configured to prevent anonymous logons.
CM-6 - Medium - CCI-000366 - V-1120 - SV-52106r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-GE-000026
Vuln IDs
  • V-1120
Rule IDs
  • SV-52106r1_rule
The FTP (File Transfer Protocol) service allows remote users to access shared files and directories. Allowing anonymous FTP connections makes user auditing difficult. Using accounts that have administrator privileges to log on to FTP risks that the userid and password will be captured on the network and give administrator access to an unauthorized user.If accounts with administrator privileges are used to access FTP, this becomes a CAT I finding.ECSC-1
Checks: C-46923r1_chk

If FTP is not installed on the system, this is NA. Open a "Command Prompt". Attempt to log on as the user "anonymous" with the following commands: C:\>ftp localhost (Connected to "servername". 220 Microsoft FTP Service) User: anonymous (331 Anonymous access allowed, send identity (e-mail name) as password.) Password: password (230 User logged in.) ftp> If the command response indicates that an anonymous FTP login was permitted, this is a finding.

Fix: F-45131r1_fix

Configure the system to prevent an installed FTP service from allowing anonymous logons.

c
FTP servers must be configured to prevent access to the system drive.
CM-6 - High - CCI-000366 - V-1121 - SV-52212r1_rule
RMF Control
CM-6
Severity
H
CCI
CCI-000366
Version
WN12-GE-000027
Vuln IDs
  • V-1121
Rule IDs
  • SV-52212r1_rule
The FTP service allows remote users to access shared files and directories which could provide access to system resources and compromise the system, especially if the user can gain access to the root directory of the boot drive.ECCD-2, ECCD-1
Checks: C-46958r1_chk

If FTP is not installed on the system, this is NA. Open a "Command Prompt". Log on using an authenticated FTP account, and attempt to access the root of the boot drive with the following commands: X:\>ftp 127.0.0.1 (Connected to "servername". 220 "servername" Microsoft FTP Service (Version 2.0).) User: "ftpuser" (331 Password required for ftpuser.) Password: "password" (230 User ftpuser logged in.) ftp> dir If the FTP session indicates access to areas of the operating system such as Program Files and Windows directories, this is a finding.

Fix: F-45231r1_fix

Configure the system to prevent an FTP service from allowing access to the system drive.

c
Only administrators responsible for the member server must have Administrator rights on the system.
AC-6 - High - CCI-002235 - V-1127 - SV-51511r3_rule
RMF Control
AC-6
Severity
H
CCI
CCI-002235
Version
WN12-GE-000004-MS
Vuln IDs
  • V-1127
Rule IDs
  • SV-51511r3_rule
An account that does not have Administrator duties must not have Administrator rights. Such rights would allow the account to bypass or modify required security restrictions on that machine and make it vulnerable to attack. System administrators must log on to systems only using accounts with the minimum level of authority necessary. For domain-joined member servers, the Domain Admins group must be replaced by a domain member server administrator group (see V-36433 in the Active Directory Domain STIG). Restricting highly privileged accounts from the local Administrators group helps mitigate the risk of privilege escalation resulting from credential theft attacks. Systems dedicated to the management of Active Directory (AD admin platforms, see V-36436 in the Active Directory Domain STIG) are exempt from this. AD admin platforms may use the Domain Admins group or a domain administrative group created specifically for AD admin platforms (see V-43711 in the Active Directory Domain STIG). Standard user accounts must not be members of the built-in Administrators group.ECPA-1
Checks: C-54671r1_chk

Review the local Administrators group. Only the appropriate administrator groups or accounts responsible for administration of the system may be members of the group. For domain-joined member servers, the Domain Admins group must be replaced by a domain member server administrator group. Systems dedicated to the management of Active Directory (AD admin platforms, see V-36436 in the Active Directory Domain STIG) are exempt from this. AD admin platforms may use the Domain Admins group or a domain administrative group created specifically for AD admin platforms (see V-43711 in the Active Directory Domain STIG). Standard user accounts must not be members of the local Administrator group. If prohibited accounts are members of the local Administrators group, this is a finding. The built-in Administrator account or other required administrative accounts would not be a finding.

Fix: F-58527r1_fix

Configure the system to include only administrator groups or accounts that are responsible for the system in the local Administrators group. For domain-joined member servers, replace the Domain Admins group with a domain member server administrator group. Systems dedicated to the management of Active Directory (AD admin platforms, see V-36436 in the Active Directory Domain STIG) are exempt from this. AD admin platforms may use the Domain Admins group or a domain administrative group created specifically for AD admin platforms (see V-43711 in the Active Directory Domain STIG). Remove any standard user accounts.

a
Security configuration tools or equivalent processes must be used to configure and maintain platforms for security compliance.
CM-6 - Low - CCI-000366 - V-1128 - SV-52859r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-00-000013
Vuln IDs
  • V-1128
Rule IDs
  • SV-52859r1_rule
Security configuration tools such as Group Policies and Security Templates allow system administrators to consolidate security-related system settings into a single configuration file. These settings can then be applied consistently to any number of Windows machines. ECSC-1
Checks: C-47176r2_chk

Verify security configuration tools or equivalent processes are being used to configure Windows systems to meet security requirements. If security configuration tools or equivalent processes are not used, this is a finding. Security configuration tools that are integrated into Windows, such as Group Policies and Security Templates, may be used to configure platforms for security compliance. If an alternate method is used to configure a system (e.g., manually using the DISA Windows Security STIGs, etc.) and the same configured result is achieved, this is acceptable.

Fix: F-45785r1_fix

Implement a process using security configuration tools or the equivalent to configure Windows systems to meet security requirements.

b
Password complexity software that enforces DoD requirements must be implemented.
IA-5 - Medium - CCI-000192 - V-1131 - SV-52104r1_rule
RMF Control
IA-5
Severity
M
CCI
CCI-000192
Version
WN12-GE-000009
Vuln IDs
  • V-1131
Rule IDs
  • SV-52104r1_rule
Password complexity software (e.g., Password Policy Enforcer) enforces a minimum mix of character types and potentially other options to create strong passwords. Passwords must contain a case-sensitive character mix with at least one of each of the following: uppercase letters, lowercase letters, numbers, and special characters. Sites are responsible for installing password complexity software that complies with current DoD requirements.If no password filter is used, and the security option for Password must meet complexity requirements (V-1150) is set to Enabled, this finding can be downgraded to a CAT III, as a less strict complexity algorithm is used.IAIA-1
Checks: C-46921r2_chk

Verify password complexity software that requires a case-sensitive character mix of at least one of each of uppercase letters, lowercase letters, numbers, and special characters is installed and enforced . If password complexity software that enforces a case-sensitive character mix of at least one of each of uppercase letters, lowercase letters, numbers, and special characters is not installed, this is a finding. The enpasflt password filter is available as an option on the IASE website in the Windows Support Files area (PKI required - http://iase.disa.mil/stigs/os/windows/support_files.html). It must be tested for the particular environment. If it does not function properly or causes issues, the site will be responsible for obtaining other password complexity software to meet the requirements. The current available versions are: Name - Modified Date EnPasFltV2x86.dll - 3/21/2011 EnPasFltV2x64.dll - 3/21/2011 If another product, such as PPE, or a different version of enpasflt is used, the SA must demonstrate that it is configured to enforce the DoD requirements. For the enpasflt password filter to function properly, verify the following: -The appropriate version of the file will be located in %systemroot%\system32. -The Date Modified should be 3/21/2011. -The "Notification Packages" value under registry key "HKLM\System\CurrentControlSet\Control\LSA" must include the file name (e.g., "EnPasFltV2x86"). Note: If a password filter is not used, the site is still responsible for requiring full compliance with DoD policy, even though the password complexity setting does not enforce the 4-character type rule.

Fix: F-45129r1_fix

Install password complexity software and configure it to enforce the required DoD standards of a case sensitive mix of at least one of each of uppercase letters, lowercase letters, numbers, and special characters. If the enpasflt password filter is used: -Copy the appropriate version to %systemroot%\system32. -Add the file name (e.g., "EnPasFltV2x86") to the "Notification Packages" value under registry key "HKLM\System\CurrentControlSet\Control\LSA". -Restart the system.

a
Nonadministrative user accounts or groups must only have print permissions on printer shares.
AC-3 - Low - CCI-000213 - V-1135 - SV-52213r1_rule
RMF Control
AC-3
Severity
L
CCI
CCI-000213
Version
WN12-GE-000012
Vuln IDs
  • V-1135
Rule IDs
  • SV-52213r1_rule
Windows shares are a means by which files, folders, printers, and other resources can be published for network users to access. Improper configuration can permit access to devices and data beyond a user's need.ECCD-1
Checks: C-46959r1_chk

Open "Devices and Printers" in Control Panel or through Search. If there are no printers configured, this is NA. For each configured printer: Right click on the printer. Select "Printer Properties". Select the "Sharing" tab. View whether "Share this printer" is checked. For any printers with "Share this printer" selected: Select the Security tab. If any standard user accounts or groups have permissions other than "Print", this is a finding. Standard users will typically be given "Print" permission through the Everyone group. "All APPLICATION PACKAGES" and "CREATOR OWNER" are not considered standard user accounts for this requirement.

Fix: F-45232r1_fix

Configure the permissions on shared printers to restrict standard users to only have Print permissions. This is typically given through the Everyone group by default.

a
Users must be forcibly disconnected when their logon hours expire.
SC-10 - Low - CCI-001133 - V-1136 - SV-52860r1_rule
RMF Control
SC-10
Severity
L
CCI
CCI-001133
Version
WN12-SO-000034
Vuln IDs
  • V-1136
Rule IDs
  • SV-52860r1_rule
Users must not be permitted to remain logged on to the network after they have exceeded their permitted logon hours. In many cases, this indicates that a user forgot to log off before leaving for the day. However, it may also indicate that a user is attempting unauthorized access at a time when the system may be less closely monitored. Forcibly disconnecting users when logon hours expire protects critical and sensitive network data from exposure to unauthorized personnel with physical access to the computer.ECSC-1
Checks: C-47177r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\LanManServer\Parameters\ Value Name: EnableForcedLogoff Value Type: REG_DWORD Value: 1

Fix: F-45786r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Microsoft network server: Disconnect clients when logon hours expire" to "Enabled".

b
Unencrypted passwords must not be sent to a third-party SMB Server.
IA-5 - Medium - CCI-000197 - V-1141 - SV-52861r1_rule
RMF Control
IA-5
Severity
M
CCI
CCI-000197
Version
WN12-SO-000030
Vuln IDs
  • V-1141
Rule IDs
  • SV-52861r1_rule
Some non-Microsoft SMB servers only support unencrypted (plain text) password authentication. Sending plain text passwords across the network, when authenticating to an SMB server, reduces the overall security of the environment. Check with the vendor of the SMB server to see if there is a way to support encrypted password authentication.ECCT-2, ECCT-1
Checks: C-47178r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\LanmanWorkstation\Parameters\ Value Name: EnablePlainTextPassword Value Type: REG_DWORD Value: 0

Fix: F-45787r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Microsoft network client: Send unencrypted password to connect to third-party SMB servers" to "Disabled".

b
Automatic logons must be disabled.
IA-11 - Medium - CCI-002038 - V-1145 - SV-52107r1_rule
RMF Control
IA-11
Severity
M
CCI
CCI-002038
Version
WN12-SO-000036
Vuln IDs
  • V-1145
Rule IDs
  • SV-52107r1_rule
Allowing a system to automatically log on when the machine is booted could give access to any unauthorized individual who restarts the computer. Automatic logon with administrator privileges would give full access to an unauthorized individual.If the DefaultName or DefaultDomainName in the same registry path contain an administrator account name and the DefaultPassword contains a value, this is a CAT I finding.ECSC-1
Checks: C-46924r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows NT\CurrentVersion\Winlogon\ Value Name: AutoAdminLogon Type: REG_SZ Value: 0

Fix: F-45132r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "MSS: (AutoAdminLogon) Enable Automatic Logon (not recommended)" to "Disabled". Ensure no passwords are stored in the "DefaultPassword" registry value noted below: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows NT\CurrentVersion\Winlogon\ Value Name: DefaultPassword (See "Updating the Windows Security Options File" in the STIG Overview document if MSS settings are not visible in the system's policy tools.)

a
Local users must not exist on a system in a domain.
CM-6 - Low - CCI-000366 - V-1148 - SV-52862r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-GE-000013
Vuln IDs
  • V-1148
Rule IDs
  • SV-52862r1_rule
To minimize potential points of attack, local users, other than built-in accounts such as Administrator and Guest accounts, must not exist on a workstation in a domain. Users must log onto workstations in a domain with their domain accounts.IAAC-1
Checks: C-47179r2_chk

This requirement is NA for nondomain-joined systems. Run the DUMPSEC utility. Select "Dump Users as Table" from the "Report" menu. Select the following fields, and click "Add" for each entry: UserName SID AcctDisabled Groups If local users other than the built-in accounts listed below exist on a workstation in a domain, this is a finding: Built-in administrator account (SID ending in 500) Built-in guest account (SID ending in 501) If a site has need of special purpose local user accounts, this must be documented with the IAO.

Fix: F-45788r1_fix

Configure domain-joined systems to restrict the existence of local user accounts. Remove any unauthorized local accounts.

a
The built-in Microsoft password complexity filter must be enabled.
IA-5 - Low - CCI-000192 - V-1150 - SV-52863r1_rule
RMF Control
IA-5
Severity
L
CCI
CCI-000192
Version
WN12-AC-000008
Vuln IDs
  • V-1150
Rule IDs
  • SV-52863r1_rule
The use of complex passwords increases their strength against guessing and brute-force attacks. This setting configures the system to verify that newly created passwords conform to the Windows password complexity policy.IAIA-1, IAIA-2
Checks: C-47180r2_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Account Policies -> Password Policy. If the value for "Password must meet complexity requirements" is not set to "Enabled", this is a finding. If the site is using a password filter that requires this setting be set to "Disabled" for the filter code to be used, this would not be considered a finding. If this setting does not affect the use of an external password filter, it will be enabled for fall-back purposes.

Fix: F-45789r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Account Policies -> Password Policy -> "Password must meet complexity requirements" to "Enabled".

a
The print driver installation privilege must be restricted to administrators.
CM-11 - Low - CCI-001812 - V-1151 - SV-52214r1_rule
RMF Control
CM-11
Severity
L
CCI
CCI-001812
Version
WN12-SO-000089
Vuln IDs
  • V-1151
Rule IDs
  • SV-52214r1_rule
Allowing users to install drivers can introduce malware or cause the instability of a system. This capability should be restricted to administrators.ECLP-1
Checks: C-46960r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\Print\Providers\LanMan Print Services\Servers\ Value Name: AddPrinterDrivers Value Type: REG_DWORD Value: 1

Fix: F-45233r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Devices: Prevent users from installing printer drivers" to "Enabled".

c
Anonymous access to the registry must be restricted.
AC-6 - High - CCI-002235 - V-1152 - SV-52864r1_rule
RMF Control
AC-6
Severity
H
CCI
CCI-002235
Version
WN12-RG-000004
Vuln IDs
  • V-1152
Rule IDs
  • SV-52864r1_rule
The registry is integral to the function, security, and stability of the Windows system. Some processes may require anonymous access to the registry. This must be limited to properly protect the system.ECCD-2, ECCD-1
Checks: C-47181r2_chk

Using the Registry Editor, navigate to the following key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\SecurePipeServers\Winreg\ If the key does not exist, this is a finding. If the permissions are not at least as restrictive as the defaults listed below, this is a finding. Administrators - Full Backup Operators - Read(QENR) Local Service - Read

Fix: F-45790r2_fix

Ensure the system is configured to prevent anonymous users from gaining access to the registry. Maintain the default permissions of the following registry key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\SecurePipeServers\Winreg\ Administrators - Full Backup Operators - Read(QENR) Local Service - Read

c
The LanMan authentication level must be set to send NTLMv2 response only, and to refuse LM and NTLM.
CM-6 - High - CCI-000366 - V-1153 - SV-52865r1_rule
RMF Control
CM-6
Severity
H
CCI
CCI-000366
Version
WN12-SO-000067
Vuln IDs
  • V-1153
Rule IDs
  • SV-52865r1_rule
The Kerberos v5 authentication protocol is the default for authentication of users who are logging on to domain accounts. NTLM, which is less secure, is retained in later Windows versions for compatibility with clients and servers that are running earlier versions of Windows or applications that still use it. It is also used to authenticate logons to stand-alone computers that are running later versions.IAIA-2, IAIA-1
Checks: C-47182r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\Lsa\ Value Name: LmCompatibilityLevel Value Type: REG_DWORD Value: 5

Fix: F-45791r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network security: LAN Manager authentication level" to "Send NTLMv2 response only. Refuse LM & NTLM".

b
The Ctrl+Alt+Del security attention sequence for logons must be enabled.
CM-6 - Medium - CCI-000366 - V-1154 - SV-52866r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-SO-000019
Vuln IDs
  • V-1154
Rule IDs
  • SV-52866r1_rule
Disabling the Ctrl+Alt+Del security attention sequence can compromise system security. Because only Windows responds to the Ctrl+Alt+Del security sequence, a user can be assured that any passwords entered following that sequence are sent only to Windows. If the sequence requirement is eliminated, malicious programs can request and receive a user's Windows password. Disabling this sequence also suppresses a custom logon banner.ECSC-1
Checks: C-47183r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: DisableCAD Value Type: REG_DWORD Value: 0

Fix: F-45792r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Interactive Logon: Do not require CTRL+ALT+DEL" to "Disabled".

b
The Deny access to this computer from the network user right on member servers must be configured to prevent access from highly privileged domain accounts and local administrator accounts on domain systems, and from unauthenticated access on all systems.
AC-3 - Medium - CCI-000213 - V-1155 - SV-51501r2_rule
RMF Control
AC-3
Severity
M
CCI
CCI-000213
Version
WN12-UR-000017-MS
Vuln IDs
  • V-1155
Rule IDs
  • SV-51501r2_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny access to this computer from the network" user right defines the accounts that are prevented from logging on from the network. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks which could lead to the compromise of an entire domain. Local administrator accounts on domain-joined systems must also be assigned this right to decrease the risk of lateral movement resulting from credential theft attacks. The Guests group must be assigned this right to prevent unauthenticated access.ECLP-1
Checks: C-49476r4_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment. If the following accounts or groups are not defined for the "Deny access to this computer from the network" user right, this is a finding: Domain Systems Only: Enterprise Admins group Domain Admins group *All Local Administrator Accounts: Windows 2012 - use the DenyNetworkAccess group - see V-45589 **Windows 2012 R2 - use "Local account" or "Local account and member of Administrators group" All Systems: Guests group Systems dedicated to the management of Active Directory (AD admin platforms, see V-36436 in the Active Directory Domain STIG) are exempt from denying the Enterprise Admins and Domain Admins groups. The related automated benchmarks will verify the group "DenyNetworkAccess" has been assigned this right on domain systems, and that it contains all local accounts that are also members of the Administrators group. Use of other methods may result in false positives requiring manual validation. *Do not use the built-in Administrators group. This group must contain the appropriate accounts/groups responsible for administering the system. **Windows 2012 R2 added new built-in security groups for assigning permissions and rights to local accounts. Use these groups instead of creating a group for local administrator accounts to apply to this and other deny rights where required. Assign the group "Local account and member of Administrators group" or the more restrictive "Local account".

Fix: F-49696r4_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Deny access to this computer from the network" to include the following: Domain Systems Only: Enterprise Admins group Domain Admins group *All Local Administrator Accounts: Windows 2012 - use the DenyNetworkAccess group - see V-45589 **Windows 2012 R2 - use "Local account" or "Local account and member of Administrators group" All Systems: Guests group Systems dedicated to the management of Active Directory (AD admin platforms, see V-36436 in the Active Directory Domain STIG) are exempt from denying the Enterprise Admins and Domain Admins groups. The related automated benchmarks will verify the group "DenyNetworkAccess" has been assigned this right on domain systems, and that it contains all local accounts that are also members of the Administrators group. Use of other methods may result in false positives requiring manual validation. *Do not use the built-in Administrators group. This group must contain the appropriate accounts/groups responsible for administering the system. **Windows 2012 R2 added new built-in security groups for assigning permissions and rights to local accounts. Use these groups instead of creating a group for local administrator accounts to apply to this and other deny rights where required. Assign the group "Local account and member of Administrators group" or the more restrictive "Local account".

b
The Smart Card removal option must be configured to Force Logoff or Lock Workstation.
CM-6 - Medium - CCI-000366 - V-1157 - SV-52867r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-SO-000027
Vuln IDs
  • V-1157
Rule IDs
  • SV-52867r1_rule
Unattended systems are susceptible to unauthorized use and must be locked. Configuring a system to lock when a smart card is removed will ensure the system is inaccessible when unattended.ECSC-1
Checks: C-47184r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows NT\CurrentVersion\Winlogon\ Value Name: SCRemoveOption Value Type: REG_SZ Value: 1 (Lock Workstation) or 2 (Force Logoff) If configuring this on servers causes issues such as terminating users' remote sessions and the site has a policy in place that any other sessions on the servers such as administrative console logons, are manually locked or logged off when unattended or not in use, this would be acceptable. This must be documented with the IAO.

Fix: F-45793r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Interactive logon: Smart card removal behavior" to "Lock Workstation" or "Force Logoff".

a
The Recovery Console SET command must be disabled.
CM-6 - Low - CCI-000366 - V-1158 - SV-52868r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-SO-000072
Vuln IDs
  • V-1158
Rule IDs
  • SV-52868r1_rule
The Recovery Console SET command allows environment variables to be set in the Recovery Console. This permits access to all drives and folders and the copying of files to removable media, which could expose sensitive information.ECCD-1, ECCD-2
Checks: C-47185r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows NT\CurrentVersion\Setup\RecoveryConsole\ Value Name: SetCommand Value Type: REG_DWORD Value: 0

Fix: F-45794r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Recovery console: Allow floppy copy and access to all drives and folders" to "Disabled".

c
The Recovery Console option must be set to prevent automatic logon to the system.
IA-11 - High - CCI-002038 - V-1159 - SV-52869r1_rule
RMF Control
IA-11
Severity
H
CCI
CCI-002038
Version
WN12-SO-000071
Vuln IDs
  • V-1159
Rule IDs
  • SV-52869r1_rule
If this option is enabled, the Recovery Console does not require a password and automatically logs on to the system. This could allow unauthorized administrative access to the system.ECCD-2, ECCD-1
Checks: C-47186r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows NT\CurrentVersion\Setup\RecoveryConsole\ Value Name: SecurityLevel Value Type: REG_DWORD Value: 0

Fix: F-45795r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Recovery console: Allow automatic administrative logon" to "Disabled".

b
The Windows SMB server must perform SMB packet signing when possible.
SC-8 - Medium - CCI-002418 - V-1162 - SV-52870r1_rule
RMF Control
SC-8
Severity
M
CCI
CCI-002418
Version
WN12-SO-000033
Vuln IDs
  • V-1162
Rule IDs
  • SV-52870r1_rule
The server message block (SMB) protocol provides the basis for many network operations. Digitally signed SMB packets aid in preventing man-in-the-middle attacks. If this policy is enabled, the SMB server will negotiate SMB packet signing as requested by the client.ECSC-1
Checks: C-47187r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\LanManServer\Parameters\ Value Name: EnableSecuritySignature Value Type: REG_DWORD Value: 1

Fix: F-45796r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Microsoft network server: Digitally sign communications (if client agrees)" to "Enabled".

b
Outgoing secure channel traffic must be encrypted when possible.
SC-8 - Medium - CCI-002418 - V-1163 - SV-52871r1_rule
RMF Control
SC-8
Severity
M
CCI
CCI-002418
Version
WN12-SO-000013
Vuln IDs
  • V-1163
Rule IDs
  • SV-52871r1_rule
Requests sent on the secure channel are authenticated, and sensitive information (such as passwords) is encrypted, but not all information is encrypted. If this policy is enabled, outgoing secure channel traffic will be encrypted.If the value for Domain Member: Digitally encrypt or sign secure channel data (always) is set to Enabled, this would not be a finding.ECCT-2, ECCT-1
Checks: C-47188r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: SealSecureChannel Value Type: REG_DWORD Value: 1 If the value for "Domain Member: Digitally encrypt or sign secure channel data (always)" is set to "Enabled", this can be NA (see V-6831).

Fix: F-45797r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Domain member: Digitally encrypt secure channel data (when possible)" to "Enabled".

b
Outgoing secure channel traffic must be signed when possible.
SC-8 - Medium - CCI-002418 - V-1164 - SV-52872r1_rule
RMF Control
SC-8
Severity
M
CCI
CCI-002418
Version
WN12-SO-000014
Vuln IDs
  • V-1164
Rule IDs
  • SV-52872r1_rule
Requests sent on the secure channel are authenticated, and sensitive information (such as passwords) is encrypted, but the channel is not integrity checked. If this policy is enabled, outgoing secure channel traffic will be signed.If the value for Domain Member: Digitally encrypt or sign secure channel data (always) is set to Enabled, this would not be a finding.DCNR-1
Checks: C-47189r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: SignSecureChannel Value Type: REG_DWORD Value: 1 If the value for "Domain Member: Digitally encrypt or sign secure channel data (always)" is set to "Enabled", this can be NA (see V-6831).

Fix: F-45798r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Domain member: Digitally sign secure channel data (when possible)" to "Enabled".

a
The computer account password must not be prevented from being reset.
CM-6 - Low - CCI-000366 - V-1165 - SV-52873r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-SO-000015
Vuln IDs
  • V-1165
Rule IDs
  • SV-52873r1_rule
Computer account passwords are changed automatically on a regular basis. Disabling automatic password changes can make the system more vulnerable to malicious access. Frequent password changes can be a significant safeguard for your system. A new password for the computer account will be generated every 30 days.IAIA-2, IAIA-1
Checks: C-47190r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: DisablePasswordChange Value Type: REG_DWORD Value: 0

Fix: F-45799r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Domain member: Disable machine account password changes" to "Disabled".

b
The Windows SMB client must be enabled to perform SMB packet signing when possible.
SC-8 - Medium - CCI-002418 - V-1166 - SV-52874r1_rule
RMF Control
SC-8
Severity
M
CCI
CCI-002418
Version
WN12-SO-000029
Vuln IDs
  • V-1166
Rule IDs
  • SV-52874r1_rule
The server message block (SMB) protocol provides the basis for many network operations. If this policy is enabled, the SMB client will request packet signing when communicating with an SMB server that is enabled or required to perform SMB packet signing.ECSC-1
Checks: C-47191r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\LanmanWorkstation\Parameters\ Value Name: EnableSecuritySignature Value Type: REG_DWORD Value: 1

Fix: F-45800r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Microsoft network client: Digitally sign communications (if server agrees)" to "Enabled".

b
Members of the Backup Operators group must be documented.
CM-6 - Medium - CCI-000366 - V-1168 - SV-52156r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-00-000009-01
Vuln IDs
  • V-1168
Rule IDs
  • SV-52156r1_rule
Backup Operators are able to read and write to any file in the system, regardless of the rights assigned to it. Backup and restore rights permit users to circumvent the file access restrictions present on NTFS disk drives for backup and restore purposes. Visibility of members of the Backup Operators group must be maintained.ECLP-1
Checks: C-46951r1_chk

If no accounts are members of the Backup Operators group, this is NA. Any accounts that are members of the Backup Operators group, including application accounts, must be documented with the IAO. If documentation of accounts that are members of the Backup Operators group is not maintained this is a finding.

Fix: F-45181r1_fix

Create the necessary documentation that identifies the members of the Backup Operators group.

b
Ejection of removable NTFS media must be restricted to Administrators.
CM-6 - Medium - CCI-000366 - V-1171 - SV-52875r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-SO-000011
Vuln IDs
  • V-1171
Rule IDs
  • SV-52875r1_rule
Removable hard drives, if they are not properly configured, can be formatted and ejected by users who are not members of the Administrators Group. Formatting and ejecting removable NTFS media must only be done by administrators.ECLP-1
Checks: C-47192r3_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows NT\CurrentVersion\Winlogon\ Value Name: AllocateDASD Value Type: REG_SZ Value: 0

Fix: F-45801r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Devices: Allowed to format and eject removable media" to "Administrators".

a
Users must be warned in advance of their passwords expiring.
CM-6 - Low - CCI-000366 - V-1172 - SV-52876r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-SO-000025
Vuln IDs
  • V-1172
Rule IDs
  • SV-52876r1_rule
Creating strong passwords that can be remembered by users requires some thought. By giving the user advance warning, the user has time to construct a sufficiently strong password. This setting configures the system to display a warning to users telling them how many days are left before their password expires.ECSC-1
Checks: C-47193r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows NT\CurrentVersion\Winlogon\ Value Name: PasswordExpiryWarning Value Type: REG_DWORD Value: 14 (or greater)

Fix: F-45802r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Interactive Logon: Prompt user to change password before expiration" to "14" days or more.

a
The default permissions of global system objects must be increased.
CM-6 - Low - CCI-000366 - V-1173 - SV-52877r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-SO-000076
Vuln IDs
  • V-1173
Rule IDs
  • SV-52877r1_rule
Windows systems maintain a global list of shared system resources such as DOS device names, mutexes, and semaphores. Each type of object is created with a default DACL that specifies who can access the objects with what permissions. If this policy is enabled, the default DACL is stronger, allowing nonadministrative users to read shared objects, but not modify shared objects that they did not create.ECSC-1
Checks: C-47194r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\Session Manager\ Value Name: ProtectionMode Value Type: REG_DWORD Value: 1

Fix: F-45803r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "System objects: Strengthen default permissions of internal system objects (e.g. Symbolic Links)" to "Enabled".

a
The amount of idle time required before suspending a session must be properly set.
SC-10 - Low - CCI-001133 - V-1174 - SV-52878r1_rule
RMF Control
SC-10
Severity
L
CCI
CCI-001133
Version
WN12-SO-000031
Vuln IDs
  • V-1174
Rule IDs
  • SV-52878r1_rule
Open sessions can increase the avenues of attack on a system. This setting is used to control when a computer disconnects an inactive SMB session. If client activity resumes, the session is automatically reestablished. This protects critical and sensitive network data from exposure to unauthorized personnel with physical access to the computer.ECSC-1
Checks: C-47195r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\LanManServer\Parameters\ Value Name: AutoDisconnect Value Type: REG_DWORD Value: 15 (or less)

Fix: F-45804r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Microsoft network server: Amount of idle time required before suspending a session" to "15" minutes or less.

c
Reversible password encryption must be disabled.
IA-5 - High - CCI-000196 - V-2372 - SV-52880r1_rule
RMF Control
IA-5
Severity
H
CCI
CCI-000196
Version
WN12-AC-000009
Vuln IDs
  • V-2372
Rule IDs
  • SV-52880r1_rule
Storing passwords using reversible encryption is essentially the same as storing clear-text versions of the passwords. For this reason, this policy must never be enabled.IAIA-2, IAIA-1
Checks: C-47197r2_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Account Policies -> Password Policy. If the value for "Store password using reversible encryption" is not set to "Disabled", this is a finding.

Fix: F-45806r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Account Policies -> Password Policy -> "Store password using reversible encryption" to "Disabled".

c
Autoplay must be disabled for all drives.
CM-7 - High - CCI-001764 - V-2374 - SV-52879r1_rule
RMF Control
CM-7
Severity
H
CCI
CCI-001764
Version
WN12-CC-000074
Vuln IDs
  • V-2374
Rule IDs
  • SV-52879r1_rule
Allowing autoplay to execute may introduce malicious code to a system. Autoplay begins reading from a drive as soon media is inserted into the drive. As a result, the setup file of programs or music on audio media may start. By default, autoplay is disabled on removable drives, such as the floppy disk drive (but not the CD-ROM drive) and on network drives. Enabling this policy disables autoplay on all drives.ECSC-1
Checks: C-47196r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer\ Value Name: NoDriveTypeAutoRun Type: REG_DWORD Value: 0x000000ff (255)

Fix: F-45805r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> AutoPlay Policies -> "Turn off AutoPlay" to "Enabled:All Drives".

b
System files must be monitored for unauthorized changes.
CM-6 - Medium - CCI-000366 - V-2907 - SV-52215r2_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-GE-000017
Vuln IDs
  • V-2907
Rule IDs
  • SV-52215r2_rule
Monitoring system files for changes against a baseline on a regular basis may help detect the possible introduction of malicious code on a system.DCSL-1
Checks: C-46961r1_chk

Determine whether the site monitors system files (e.g., *.exe, *.bat, *.com, *.cmd, and *.dll) on servers for unauthorized changes against a baseline on a weekly basis. If system files are not monitored for unauthorized changes, this is a finding. A properly configured HBSS Policy Auditor 5.2 or later File Integrity Monitor (FIM) module will meet the requirement for file integrity checking. The Asset module within HBSS does not meet this requirement.

Fix: F-45234r1_fix

Monitor system files (e.g., *.exe, *.bat, *.com, *.cmd, and *.dll) on servers for unauthorized changes against a baseline on a weekly basis. This can be done with the use of various monitoring tools.

b
File shares must limit access to data on a system.
SC-4 - Medium - CCI-001090 - V-3245 - SV-52881r1_rule
RMF Control
SC-4
Severity
M
CCI
CCI-001090
Version
WN12-GE-000018
Vuln IDs
  • V-3245
Rule IDs
  • SV-52881r1_rule
Shares on a system provide network access. To prevent exposing sensitive information, where shares are necessary, permissions must be reconfigured to give the minimum access to those accounts that require it.System created shares should be excluded from the check.ECAN-1
Checks: C-47198r2_chk

Open "Computer Management". Navigate to "Shared Folders" under "System Tools". Select the "Shares" object. Right click any non-system-created shares (the system will prompt you when Properties is selected for system-created shares). Select Properties. Select the Share Permissions tab. Verify the necessity of any shares found. If the file shares have not been reconfigured to restrict permissions to the specific groups or accounts that require access, this is a finding. Select the Security tab. If the NTFS permissions have not been reconfigured to restrict permissions to the specific groups or accounts that require access, this is a finding.

Fix: F-45807r2_fix

If a share is required on a system, configure the share and NTFS permissions to limit access to the specific groups or accounts that require it. Remove any unnecessary nonsystem-created shares.

b
Servers must have a host-based Intrusion Detection System.
SI-4 - Medium - CCI-002664 - V-3289 - SV-52105r2_rule
RMF Control
SI-4
Severity
M
CCI
CCI-002664
Version
WN12-GE-000022
Vuln IDs
  • V-3289
Rule IDs
  • SV-52105r2_rule
A properly configured host-based Intrusion Detection System provides another level of defense against unauthorized access to critical servers. With proper configuration and logging enabled, such a system can stop and/or alert for many attempts to gain unauthorized access to resources.This finding can be downgraded to a CAT III, if there is an active JIDS or firewall protecting the network. ECID-1
Checks: C-46922r1_chk

Determine whether there is a host-based Intrusion Detection System on each server. If the HIPS component of HBSS is installed and active on the host and the Alerts of blocked activity are being logged and monitored, this will meet the requirement of this finding. A HID device is not required on a system that has the role as the Network Intrusion Device (NID). However, this exception needs to be documented with the site IAO.

Fix: F-45130r1_fix

Install a host-based Intrusion Detection System on each server.

c
Anonymous SID/Name translation must not be allowed.
CM-6 - High - CCI-000366 - V-3337 - SV-52882r1_rule
RMF Control
CM-6
Severity
H
CCI
CCI-000366
Version
WN12-SO-000050
Vuln IDs
  • V-3337
Rule IDs
  • SV-52882r1_rule
Allowing anonymous SID/Name translation can provide sensitive information for accessing a system. Only authorized users must be able to perform such translations.ECSC-1
Checks: C-47199r2_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options. If the value for "Network access: Allow anonymous SID/Name translation" is not set to "Disabled", this is a finding.

Fix: F-45808r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network access: Allow anonymous SID/Name translation" to "Disabled".

c
Named pipes that can be accessed anonymously must be configured to contain no values on member servers.
SC-4 - High - CCI-001090 - V-3338 - SV-51497r1_rule
RMF Control
SC-4
Severity
H
CCI
CCI-001090
Version
WN12-SO-000055-MS
Vuln IDs
  • V-3338
Rule IDs
  • SV-51497r1_rule
Named pipes that can be accessed anonymously provide the potential for gaining unauthorized system access. Pipes are internal system communications processes. They are identified internally by ID numbers that vary between systems. To make access to these processes easier, these pipes are given names that do not vary between systems. This setting controls which of these pipes anonymous users may access.ECSC-1
Checks: C-46573r3_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\LanManServer\Parameters\ Value Name: NullSessionPipes Value Type: REG_MULTI_SZ Value: (blank) Legitimate applications may add entries to this registry value. If an application requires these entries to function properly and is documented with the IAO, this would not be a finding. Documentation must contain supporting information from the vendor's instructions.

Fix: F-44296r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network access: Named pipes that can be accessed anonymously" to be defined but containing no entries (blank).

c
Unauthorized remotely accessible registry paths must not be configured.
SC-4 - High - CCI-001090 - V-3339 - SV-52883r1_rule
RMF Control
SC-4
Severity
H
CCI
CCI-001090
Version
WN12-SO-000056
Vuln IDs
  • V-3339
Rule IDs
  • SV-52883r1_rule
The registry is integral to the function, security, and stability of the Windows system. Some processes may require remote access to the registry. This setting controls which registry paths are accessible from a remote computer. These registry paths must be limited, as they could give unauthorized individuals access to the registry.ECCD-1, ECCD-2
Checks: C-47200r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\SecurePipeServers\Winreg\AllowedExactPaths\ Value Name: Machine Value Type: REG_MULTI_SZ Value: see below System\CurrentControlSet\Control\ProductOptions System\CurrentControlSet\Control\Server Applications Software\Microsoft\Windows NT\CurrentVersion Legitimate applications may add entries to this registry value. If an application requires these entries to function properly and is documented with the IAO, this would not be a finding. Documentation must contain supporting information from the vendor's instructions.

Fix: F-45809r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network access: Remotely accessible registry paths" with the following entries: System\CurrentControlSet\Control\ProductOptions System\CurrentControlSet\Control\Server Applications Software\Microsoft\Windows NT\CurrentVersion

c
Network shares that can be accessed anonymously must not be allowed.
SC-4 - High - CCI-001090 - V-3340 - SV-52884r1_rule
RMF Control
SC-4
Severity
H
CCI
CCI-001090
Version
WN12-SO-000059
Vuln IDs
  • V-3340
Rule IDs
  • SV-52884r1_rule
Anonymous access to network shares provides the potential for gaining unauthorized system access by network users. This could lead to the exposure or corruption of sensitive data.ECCD-2, ECCD-1
Checks: C-47201r2_chk

If the following registry value does not exist, this is not a finding: If the following registry value does exist and is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\LanManServer\Parameters\ Value Name: NullSessionShares Value Type: REG_MULTI_SZ Value: (Blank)

Fix: F-45810r1_fix

Ensure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network access: Shares that can be accessed anonymously" contains no entries (blank).

c
Solicited Remote Assistance must not be allowed.
SC-4 - High - CCI-001090 - V-3343 - SV-52885r1_rule
RMF Control
SC-4
Severity
H
CCI
CCI-001090
Version
WN12-CC-000059
Vuln IDs
  • V-3343
Rule IDs
  • SV-52885r1_rule
Remote assistance allows another user to view or take control of the local session of a user. Solicited assistance is help that is specifically requested by the local user. This may allow unauthorized parties access to the resources on the computer.ECSC-1
Checks: C-47202r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: fAllowToGetHelp Type: REG_DWORD Value: 0

Fix: F-45811r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Remote Assistance -> "Configure Solicited Remote Assistance" to "Disabled".

c
Local accounts with blank passwords must be restricted to prevent access from the network.
CM-6 - High - CCI-000366 - V-3344 - SV-52886r1_rule
RMF Control
CM-6
Severity
H
CCI
CCI-000366
Version
WN12-SO-000004
Vuln IDs
  • V-3344
Rule IDs
  • SV-52886r1_rule
An account without a password can allow unauthorized access to a system as only the username would be required. Password policies should prevent accounts with blank passwords from existing on a system. However, if a local account with a blank password did exist, enabling this setting will prevent network access, limiting the account to local console logon only.IAIA-1
Checks: C-47203r3_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\Lsa\ Value Name: LimitBlankPasswordUse Value Type: REG_DWORD Value: 1

Fix: F-45812r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Accounts: Limit local account use of blank passwords to console logon only" to "Enabled".

a
The maximum age for machine account passwords must be set to requirements.
CM-6 - Low - CCI-000366 - V-3373 - SV-52887r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-SO-000016
Vuln IDs
  • V-3373
Rule IDs
  • SV-52887r1_rule
Computer account passwords are changed automatically on a regular basis. This setting controls the maximum password age that a machine account may have. This setting must be set to no more than 30 days, ensuring the machine changes its password monthly.IAIA-2, IAIA-1
Checks: C-47204r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: MaximumPasswordAge Value Type: REG_DWORD Value: 30 (or less, but not 0)

Fix: F-45813r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Domain member: Maximum machine account password age" to "30" or less (excluding "0" which is unacceptable).

b
The system must be configured to require a strong session key.
SC-8 - Medium - CCI-002418 - V-3374 - SV-52888r1_rule
RMF Control
SC-8
Severity
M
CCI
CCI-002418
Version
WN12-SO-000017
Vuln IDs
  • V-3374
Rule IDs
  • SV-52888r1_rule
A computer connecting to a domain controller will establish a secure channel. Requiring strong session keys enforces 128-bit encryption between systems. ECSC-1
Checks: C-47205r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: RequireStrongKey Value Type: REG_DWORD Value: 1 This setting may prevent a system from being joined to a domain if not configured consistently between systems.

Fix: F-45814r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Domain member: Require strong (Windows 2000 or Later) session key" to "Enabled".

b
The system must be configured to prevent the storage of passwords and credentials.
IA-11 - Medium - CCI-002038 - V-3376 - SV-52889r1_rule
RMF Control
IA-11
Severity
M
CCI
CCI-002038
Version
WN12-SO-000053
Vuln IDs
  • V-3376
Rule IDs
  • SV-52889r1_rule
This setting controls the storage of passwords and credentials for network authentication on the local system. Such credentials must not be stored on the local machine, as that may lead to account compromise.ECSC-1
Checks: C-47206r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\Lsa\ Value Name: DisableDomainCreds Value Type: REG_DWORD Value: 1

Fix: F-45815r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network access: Do not allow storage of passwords and credentials for network authentication" to "Enabled".

b
The system must be configured to prevent anonymous users from having the same rights as the Everyone group.
CM-6 - Medium - CCI-000366 - V-3377 - SV-52890r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-SO-000054
Vuln IDs
  • V-3377
Rule IDs
  • SV-52890r1_rule
Access by anonymous users must be restricted. If this setting is enabled, then anonymous users have the same rights and permissions as the built-in Everyone group. Anonymous users must not have these permissions or rights.ECCD-2, ECSC-1, ECLP-1, ECCD-1
Checks: C-47207r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\Lsa\ Value Name: EveryoneIncludesAnonymous Value Type: REG_DWORD Value: 0

Fix: F-45816r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network access: Let everyone permissions apply to anonymous users" to "Disabled".

b
The system must be configured to use the Classic security model.
SC-4 - Medium - CCI-001090 - V-3378 - SV-52891r1_rule
RMF Control
SC-4
Severity
M
CCI
CCI-001090
Version
WN12-SO-000060
Vuln IDs
  • V-3378
Rule IDs
  • SV-52891r1_rule
Windows includes two network-sharing security models - Classic and Guest only. With the Classic model, local accounts must be password protected; otherwise, anyone can use guest user accounts to access shared system resources.ECLO-1
Checks: C-47208r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\Lsa\ Value Name: ForceGuest Value Type: REG_DWORD Value: 0

Fix: F-45817r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network access: Sharing and security model for local accounts" to "Classic - local users authenticate as themselves".

c
The system must be configured to prevent the storage of the LAN Manager hash of passwords.
IA-5 - High - CCI-000196 - V-3379 - SV-52892r1_rule
RMF Control
IA-5
Severity
H
CCI
CCI-000196
Version
WN12-SO-000065
Vuln IDs
  • V-3379
Rule IDs
  • SV-52892r1_rule
The LAN Manager hash uses a weak encryption algorithm and there are several tools available that use this hash to retrieve account passwords. This setting controls whether or not a LAN Manager hash of the password is stored in the SAM the next time the password is changed. ECSC-1, IAIA-1, IAIA-2
Checks: C-47209r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\Lsa\ Value Name: NoLMHash Value Type: REG_DWORD Value: 1

Fix: F-45818r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network security: Do not store LAN Manager hash value on next password change" to "Enabled".

b
The system must be configured to force users to log off when their allowed logon hours expire.
SC-10 - Medium - CCI-001133 - V-3380 - SV-52893r1_rule
RMF Control
SC-10
Severity
M
CCI
CCI-001133
Version
WN12-SO-000066
Vuln IDs
  • V-3380
Rule IDs
  • SV-52893r1_rule
Limiting logon hours can help protect data by only allowing access during specified times. This setting controls whether or not users are forced to log off when their allowed logon hours expire. If logon hours are set for users, this must be enforced.ECSC-1
Checks: C-47210r2_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options. If the value for "Network security: Force logoff when logon hours expire" is not set to "Enabled", this is a finding.

Fix: F-45819r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network security: Force logoff when logon hours expire" to "Enabled".

b
The system must be configured to the required LDAP client signing level.
CM-6 - Medium - CCI-000366 - V-3381 - SV-52894r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-SO-000068
Vuln IDs
  • V-3381
Rule IDs
  • SV-52894r1_rule
This setting controls the signing requirements for LDAP clients. This setting must be set to Negotiate signing or Require signing, depending on the environment and type of LDAP server in use.ECSC-1
Checks: C-47211r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\LDAP\ Value Name: LDAPClientIntegrity Value Type: REG_DWORD Value: 1

Fix: F-45820r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network security: LDAP client signing requirements" to "Negotiate signing" at a minimum.

b
The system must be configured to meet the minimum session security requirement for NTLM SSP-based clients.
CM-6 - Medium - CCI-000366 - V-3382 - SV-52895r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-SO-000069
Vuln IDs
  • V-3382
Rule IDs
  • SV-52895r1_rule
Microsoft has implemented a variety of security support providers for use with RPC sessions. All of the options must be enabled to ensure the maximum security level.ECCT-2, ECCT-1
Checks: C-47212r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\Lsa\MSV1_0\ Value Name: NTLMMinClientSec Value Type: REG_DWORD Value: 0x20080000 (537395200)

Fix: F-45821r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network security: Minimum session security for NTLM SSP based (including secure RPC) clients" to "Require NTLMv2 session security" and "Require 128-bit encryption" (all options selected).

b
The system must be configured to use FIPS-compliant algorithms for encryption, hashing, and signing.
SC-13 - Medium - CCI-002450 - V-3383 - SV-52896r1_rule
RMF Control
SC-13
Severity
M
CCI
CCI-002450
Version
WN12-SO-000074
Vuln IDs
  • V-3383
Rule IDs
  • SV-52896r1_rule
This setting ensures that the system uses algorithms that are FIPS-compliant for encryption, hashing, and signing. FIPS-compliant algorithms meet specific standards established by the U.S. Government and must be the algorithms used for all OS encryption functions.Clients with this setting enabled will not be able to communicate via digitally encrypted or signed protocols with servers that do not support these algorithms. Both the browser and web server must be configured to use TLS, or the browser will not be able to connect to a secure site.ECCT-2, ECCT-1
Checks: C-47213r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\Lsa\FIPSAlgorithmPolicy\ Value Name: Enabled Value Type: REG_DWORD Value: 1 Warning: Clients with this setting enabled will not be able to communicate via digitally encrypted or signed protocols with servers that do not support these algorithms. Both the browser and web server must be configured to use TLS, or the browser will not be able to connect to a secure site.

Fix: F-45822r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing" to "Enabled".

b
The system must be configured to require case insensitivity for non-Windows subsystems.
CM-6 - Medium - CCI-000366 - V-3385 - SV-52897r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-SO-000075
Vuln IDs
  • V-3385
Rule IDs
  • SV-52897r1_rule
This setting controls the behavior of non-Windows subsystems when dealing with the case of arguments or commands. Case sensitivity could lead to the access of files or commands that must be restricted. To prevent this from happening, case insensitivity restrictions must be required.ECSC-1
Checks: C-47214r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\Session Manager\Kernel\ Value Name: ObCaseInsensitive Value Type: REG_DWORD Value: 1

Fix: F-45823r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "System objects: Require case insensitivity for non-Windows subsystems" to "Enabled".

b
Remote Desktop Services must limit users to one remote session.
AC-10 - Medium - CCI-000054 - V-3449 - SV-52216r2_rule
RMF Control
AC-10
Severity
M
CCI
CCI-000054
Version
WN12-CC-000131
Vuln IDs
  • V-3449
Rule IDs
  • SV-52216r2_rule
Allowing multiple Remote Desktop Services sessions could consume resources. There is also potential to make a secondary connection to a system with compromised credentials.ECLO-1, ECLO-2
Checks: C-46962r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: fSingleSessionPerUser Type: REG_DWORD Value: 1

Fix: F-45235r2_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Connections -> "Restrict Remote Desktop Services users to a single Remote Desktop Services Session" to "Enabled".

b
Remote Desktop Services must always prompt a client for passwords upon connection.
IA-11 - Medium - CCI-002038 - V-3453 - SV-52898r1_rule
RMF Control
IA-11
Severity
M
CCI
CCI-002038
Version
WN12-CC-000099
Vuln IDs
  • V-3453
Rule IDs
  • SV-52898r1_rule
This setting controls the ability of users to supply passwords automatically as part of their remote desktop connection. Disabling this setting would allow anyone to use the stored credentials in a connection item to connect to the terminal server.IAIA-1, IAIA-2
Checks: C-47215r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: fPromptForPassword Type: REG_DWORD Value: 1

Fix: F-45824r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Security -> "Always prompt for password upon connection" to "Enabled".

b
Remote Desktop Services must be configured with the client connection encryption set to the required level.
AC-17 - Medium - CCI-000068 - V-3454 - SV-52899r1_rule
RMF Control
AC-17
Severity
M
CCI
CCI-000068
Version
WN12-CC-000100
Vuln IDs
  • V-3454
Rule IDs
  • SV-52899r1_rule
Remote connections must be encrypted to prevent interception of data or sensitive information. Selecting "High Level" will ensure encryption of Remote Desktop Services sessions in both directions.ECCT-1, ECCT-2
Checks: C-47216r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: MinEncryptionLevel Type: REG_DWORD Value: 3

Fix: F-45825r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Security -> "Set client connection encryption level" to "Enabled" and "High Level".

b
Remote Desktop Services must be configured to use session-specific temporary folders.
CM-6 - Medium - CCI-000366 - V-3455 - SV-52900r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-CC-000104
Vuln IDs
  • V-3455
Rule IDs
  • SV-52900r1_rule
If a communal temporary folder is used for remote desktop sessions, it might be possible for users to access other users' temporary folders. If this setting is enabled, only one temporary folder is used for all remote desktop sessions. Per session temporary folders must be established.ECRC-1
Checks: C-47217r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: PerSessionTempDir Type: REG_DWORD Value: 1

Fix: F-45826r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Temporary Folders -> "Do not use temporary folders per session" to "Disabled".

b
Remote Desktop Services must delete temporary folders when a session is terminated.
CM-6 - Medium - CCI-000366 - V-3456 - SV-52901r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-CC-000103
Vuln IDs
  • V-3456
Rule IDs
  • SV-52901r1_rule
Remote desktop session temporary folders must always be deleted after a session is over to prevent hard disk clutter and potential leakage of information. This setting controls the deletion of the temporary folders when the session is terminated.ECRC-1
Checks: C-47218r3_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: DeleteTempDirsOnExit Type: REG_DWORD Value: 1

Fix: F-45827r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Temporary Folders -> "Do not delete temp folder upon exit" to "Disabled".

b
Remote Desktop Services must be configured to set a time limit for disconnected sessions.
SC-10 - Medium - CCI-001133 - V-3457 - SV-52902r1_rule
RMF Control
SC-10
Severity
M
CCI
CCI-001133
Version
WN12-CC-000102
Vuln IDs
  • V-3457
Rule IDs
  • SV-52902r1_rule
This setting controls how long a session will remain open if it is unexpectedly terminated. Such sessions use system resources and must be terminated as soon as possible.ECSC-1
Checks: C-47219r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: MaxDisconnectionTime Type: REG_DWORD Value: 0x0000ea60 (60000)

Fix: F-45828r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Session Time Limits -> "Set time limit for disconnected sessions" to "Enabled", and "End a disconnected session" to "1 minute".

b
Remote Desktop Services must be configured to disconnect an idle session after the specified time period.
SC-10 - Medium - CCI-001133 - V-3458 - SV-52903r1_rule
RMF Control
SC-10
Severity
M
CCI
CCI-001133
Version
WN12-CC-000101
Vuln IDs
  • V-3458
Rule IDs
  • SV-52903r1_rule
This setting controls how long a session may be idle before it is automatically disconnected from the server. Users must disconnect if they plan on being away from their terminals for extended periods of time. Idle sessions must be disconnected after 15 minutes.ECSC-1
Checks: C-47220r2_chk

If the following registry value does not exist or its value is set to "0" or greater than "15" minutes, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: MaxIdleTime Type: REG_DWORD Value: 0x000dbba0 (900000) or less but not 0

Fix: F-45829r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Session Time Limits -> "Set time limit for active but idle Remote Desktop Services sessions" to "Enabled", and the "Idle session limit" to 15 minutes or less, excluding "0", which equates to "Never".

b
Group Policies must be refreshed in the background if the user is logged on.
CM-6 - Medium - CCI-000366 - V-3469 - SV-52906r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-CC-000029
Vuln IDs
  • V-3469
Rule IDs
  • SV-52906r1_rule
If this setting is enabled, then Group Policy settings are not refreshed while a user is currently logged on. This could lead to instances when a user does not have the latest changes to a policy applied and is therefore operating in an insecure context.ECSC-1
Checks: C-47221r2_chk

Review the registry. If the following registry value does not exist, this is not a finding (this is the expected result from configuring the policy as outlined in the Fix section.): If the following registry value exists but is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\system\ Value Name: DisableBkGndGroupPolicy Type: REG_DWORD Value: 0

Fix: F-45832r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Group Policy -> "Turn off background refresh of Group Policy" to "Disabled".

b
The system must be configured to prevent unsolicited remote assistance offers.
SC-4 - Medium - CCI-001090 - V-3470 - SV-52917r1_rule
RMF Control
SC-4
Severity
M
CCI
CCI-001090
Version
WN12-CC-000058
Vuln IDs
  • V-3470
Rule IDs
  • SV-52917r1_rule
Remote assistance allows another user to view or take control of the local session of a user. Unsolicited remote assistance is help that is offered by the remote user. This may allow unauthorized parties access to the resources on the computer.ECSC-1
Checks: C-47222r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: fAllowUnsolicited Type: REG_DWORD Value: 0

Fix: F-45843r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Remote Assistance -> "Configure Offer Remote Assistance" to "Disabled".

b
The system must be configured to prevent automatic forwarding of error information.
CM-6 - Medium - CCI-000366 - V-3471 - SV-52918r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-CC-000046
Vuln IDs
  • V-3471
Rule IDs
  • SV-52918r1_rule
This setting controls the reporting of errors to Microsoft and, if defined, a corporate error reporting site. This does not interfere with the reporting of errors to the local user. Since the contents of memory are included in this error report, sensitive information may be transmitted to Microsoft. This feature must be disabled to prevent the release of such information.ECSC-1
Checks: C-47223r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\PCHealth\ErrorReporting\ Value Name: DoReport Type: REG_DWORD Value: 0 This setting may be enabled if the site has configured the option to send reports to a local error reporting server: Computer Configuration -> Administrative Templates -> Windows Components -> Windows Error Reporting -> Advanced Error Reporting Settings -> "Configure Corporate Windows Error Reporting".

Fix: F-45844r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication settings -> "Turn off Windows Error Reporting" to "Enabled".

a
If the time service is configured, it must use an authorized time server.
AU-8 - Low - CCI-001891 - V-3472 - SV-52919r1_rule
RMF Control
AU-8
Severity
L
CCI
CCI-001891
Version
WN12-CC-000069
Vuln IDs
  • V-3472
Rule IDs
  • SV-52919r1_rule
The Windows Time Service controls time synchronization settings. Time synchronization is essential for authentication and auditing purposes. If the Windows Time Service is used, it must synchronize with a secure, authorized time source. Domain-joined systems are automatically configured to synchronize with domain controllers. If an NTP server is configured, it must synchronize with a secure, authorized time source.ECSC-1
Checks: C-47224r2_chk

Review the following registry values: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\W32time\Parameters\ Value Name: Type Type: REG_SZ Value: Possible values are NoSync, NTP, NT5DS, AllSync and Value Name: NTPServer Type: REG_SZ Value: "address of the time server" The following would be a finding: "Type" has a value of "NTP" or "Allsync" AND the "NTPServer" value is set to "time.windows.com" or other unauthorized server. The following would not be a finding: The referenced registry values do not exist. "Type" has a value of "NoSync" or "NT5DS". "Type" has a value of "NTP" or "Allsync" AND the "NTPServer" is blank or configured to an authorized time server. For DoD organizations, the US Naval Observatory operates stratum 1 time servers, identified at http://tycho.usno.navy.mil/ntp.html. Time synchronization will occur through a hierarchy of time servers down to the local level. Clients and lower-level servers will synchronize with an authorized time server in the hierarchy. Domain-joined systems are automatically configured to synchronize with domain controllers, and it would not be a finding unless this is changed.

Fix: F-45845r1_fix

If the system needs to be configured to an NTP server, configure the system to point to an authorized time server by setting the policy value for Computer Configuration -> Administrative Templates -> System -> Windows Time Service -> Time Providers -> "Configure Windows NTP Client" to "Enabled", and configure the "NtpServer" field to point to an authorized time server.

b
The system must be configured to use Safe DLL Search Mode.
CM-6 - Medium - CCI-000366 - V-3479 - SV-52920r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-SO-000045
Vuln IDs
  • V-3479
Rule IDs
  • SV-52920r1_rule
The default search behavior, when an application calls a function in a Dynamic Link Library (DLL), is to search the current directory, followed by the directories contained in the system's path environment variable. An unauthorized DLL, inserted into an application's working directory, could allow malicious code to be run on the system. Setting this policy value forces the system to search the %Systemroot% for the DLL before searching the current directory or the rest of the path.ECSC-1
Checks: C-47225r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\Session Manager\ Value Name: SafeDllSearchMode Value Type: REG_DWORD Value: 1

Fix: F-45846r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "MSS: (SafeDllSearchMode) Enable Safe DLL search mode (recommended)" to "Enabled". (See "Updating the Windows Security Options File" in the STIG Overview document if MSS settings are not visible in the system's policy tools.)

b
Windows Media Player must be configured to prevent automatic checking for updates.
CM-11 - Medium - CCI-001812 - V-3480 - SV-53130r1_rule
RMF Control
CM-11
Severity
M
CCI
CCI-001812
Version
WN12-CC-000122
Vuln IDs
  • V-3480
Rule IDs
  • SV-53130r1_rule
Uncontrolled system updates can introduce issues to a system. The automatic check for updates performed by Windows Media Player must be disabled to ensure a constant platform and to prevent the introduction of unknown\untested software on the system.DCSL-1
Checks: C-47436r1_chk

Windows Media Player is not installed by default. If it is not installed, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\WindowsMediaPlayer\ Value Name: DisableAutoupdate Type: REG_DWORD Value: 1

Fix: F-46056r1_fix

If Windows Media Player is installed, configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Media Player -> "Prevent Automatic Updates" to "Enabled".

b
Media Player must be configured to prevent automatic Codec downloads.
CM-11 - Medium - CCI-001812 - V-3481 - SV-52921r1_rule
RMF Control
CM-11
Severity
M
CCI
CCI-001812
Version
WN12-UC-000013
Vuln IDs
  • V-3481
Rule IDs
  • SV-52921r1_rule
The Windows Media Player uses software components, referred to as Codecs, to play back media files. By default, when an unknown file type is opened with the Media Player, it will search the Internet for the appropriate Codec and automatically download it. To ensure platform consistency and to protect against new vulnerabilities associated with media types, all Codecs must be installed by the System Administrator.DCSL-1
Checks: C-47226r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_CURRENT_USER Registry Path: \Software\Policies\Microsoft\WindowsMediaPlayer\ Value Name: PreventCodecDownload Type: REG_DWORD Value: 1

Fix: F-45847r1_fix

Configure the policy value for User Configuration -> Administrative Templates -> Windows Components -> Windows Media Player -> Playback -> "Prevent Codec Download" to "Enabled".

b
Necessary services must be documented to maintain a baseline to determine if additional, unnecessary services have been added to a system.
CM-7 - Medium - CCI-000381 - V-3487 - SV-52218r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-GE-000021
Vuln IDs
  • V-3487
Rule IDs
  • SV-52218r1_rule
Unnecessary services increase the attack surface of a system. Some services may be run under the local System account, which generally has more permissions than required by the service. Compromising a service could allow an intruder to obtain system permissions and open the system to a variety of attacks.ECSC-1
Checks: C-46963r1_chk

Required services will vary between organizations, and on the role of the individual system. Organizations will develop their own list of services which will be documented and justified with the IAO. The site's list will be provided for any security review. Services common to multiple systems can be addressed in one document. Exceptions for individual systems should be identified separately by system. Individual services specifically required to be disabled per the STIG are identified in separate requirements. If the site has not documented the services required for their system(s), this is a finding. The following can be used to view the services on a system: Run "Services.msc". Services for Windows Server 2012 roles are managed automatically, adding those necessary for a particular role. The following lists the default services for a baseline installation as a reference. This can be used as a basis for documenting the services necessary. Default Installation Name - Startup Type Application Experience - Manual (Trigger Start) Application Identity - Manual (Trigger Start) Application Information - Manual Application Layer Gateway Service - Manual Application Management - Manual Background Intelligent Transfer Service - Automatic (Delayed Start) Background Tasks Infrastructure Service - Automatic Base Filtering Engine - Automatic Certificate Propagation - Manual CNG Key Isolation - Manual (Trigger Start) COM+ Event System - Automatic COM+ System Application - Manual Computer Browser - Disabled Credential Manager - Manual Cryptographic Services - Automatic DCOM Server Process Launcher - Automatic Device Association Service - Manual (Trigger Start) Device Install Service - Manual (Trigger Start) Device Setup Manager - Manual (Trigger Start) DHCP Client - Automatic Diagnostic Policy Service - Automatic (Delayed Start) Diagnostic Service Host - Manual Diagnostic System Host - Manual Distributed Link Tracking Client - Automatic Distributed Transaction Coordinator - Automatic (Delayed Start) DNS Client - Automatic (Trigger Start) Encrypting File System (EFS) - Manual (Trigger Start) Extensible Authentication Protocol - Manual Function Discovery Provider Host - Manual Function Discovery Resource Publication - Manual Group Policy Client - Automatic (Trigger Start) Health Key and Certificate Management - Manual Human Interface Device Access - Manual (Trigger Start) Hyper-V Data Exchange Service - Manual (Trigger Start) Hyper-V Guest Shutdown Service - Manual (Trigger Start) Hyper-V Heartbeat Service - Manual (Trigger Start) Hyper-V Remote Desktop Virtualization Service - Manual (Trigger Start) Hyper-V Time Synchronization Service - Manual (Trigger Start) Hyper-V Volume Shadow Copy Requestor - Manual (Trigger Start) IKE and AuthIP IPsec Keying Modules - Manual (Trigger Start) Interactive Services Detection - Manual Internet Connection Sharing (ICS) - Disabled IP Helper - Automatic IPsec Policy Agent - Manual (Trigger Start) KDC Proxy Server service (KPS) - Manual KtmRm for Distributed Transaction Coordinator - Manual (Trigger Start) Link-Layer Topology Discovery Mapper - Manual Local Session Manager - Automatic Microsoft iSCSI Initiator Service - Manual Microsoft Software Shadow Copy Provider - Manual Multimedia Class Scheduler - Manual Net.Tcp Port Sharing Service - Disabled Netlogon - Manual Network Access Protection Agent - Manual Network Connections - Manual Network Connectivity Assistant - Manual (Trigger Start) Network List Service - Manual Network Location Awareness - Automatic Network Store Interface Service - Automatic Optimize drives - Manual Performance Counter DLL Host - Manual Performance Logs & Alerts - Manual Plug and Play - Manual Portable Device Enumerator Service - Manual (Trigger Start) Power - Automatic Print Spooler - Automatic Printer Extensions and Notifications - Manual Problem Reports and Solutions Control Panel Support - Manual Remote Access Auto Connection Manager - Manual Remote Access Connection Manager - Manual Remote Desktop Configuration - Manual Remote Desktop Services - Manual Remote Desktop Services UserMode Port Redirector - Manual Remote Procedure Call (RPC) - Automatic Remote Procedure Call (RPC) Locator - Manual Remote Registry - Automatic (Trigger Start) Resultant Set of Policy Provider - Manual Routing and Remote Access - Disabled RPC Endpoint Mapper - Automatic Secondary Logon - Manual Secure Socket Tunneling Protocol Service - Manual Security Accounts Manager - Automatic Server - Automatic Shell Hardware Detection - Automatic Smart Card - Disabled Smart Card Removal Policy - Manual SNMP Trap - Manual Software Protection - Automatic (Delayed Start, Trigger Start) Special Administration Console Helper - Manual Spot Verifier - Manual (Trigger Start) SSDP Discovery - Disabled Superfetch - Manual System Event Notification Service - Automatic Task Scheduler - Automatic TCP/IP NetBIOS Helper - Automatic (Trigger Start) Telephony - Manual Themes - Automatic Thread Ordering Server - Manual UPnP Device Host - Disabled User Access Logging Service - Automatic (Delayed Start) User Profile Service - Automatic Virtual Disk - Manual Volume Shadow Copy - Manual Windows All-User Install Agent - Manual (Trigger Start) Windows Audio - Manual Windows Audio Endpoint Builder - Manual Windows Color System - Manual Windows Driver Foundation - User-mode Driver Framework - Manual (Trigger Start) Windows Error Reporting Service - Manual (Trigger Start) Windows Event Collector - Manual Windows Event Log - Automatic Windows Firewall - Automatic Windows Font Cache Service - Automatic Windows Installer - Manual Windows Licensing Monitoring Service - Automatic Windows Management Instrumentation - Automatic Windows Modules Installer - Manual Windows Remote Management (WS-Management) - Automatic Windows Store Service (WSService) - Manual (Trigger Start) Windows Time - Manual (Trigger Start) Windows Update - Manual WinHTTP Web Proxy Auto-Discovery Service - Manual Wired AutoConfig - Manual WMI Performance Adapter - Manual Workstation - Automatic

Fix: F-45237r1_fix

Document the services required for the system to operate. Remove or disable any services that are not required.

b
The system must be configured to meet the minimum session security requirement for NTLM SSP-based servers.
CM-6 - Medium - CCI-000366 - V-3666 - SV-52922r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-SO-000070
Vuln IDs
  • V-3666
Rule IDs
  • SV-52922r1_rule
Microsoft has implemented a variety of security support providers for use with RPC sessions. All of the options must be enabled to ensure the maximum security level.ECCT-1, ECCT-2
Checks: C-47227r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\Lsa\MSV1_0\ Value Name: NTLMMinServerSec Value Type: REG_DWORD Value: 0x20080000 (537395200)

Fix: F-45848r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network security: Minimum session security for NTLM SSP based (including secure RPC) servers" to "Require NTLMv2 session security" and "Require 128-bit encryption" (all options selected).

a
The system must generate an audit event when the audit log reaches a percentage of full threshold.
AU-5 - Low - CCI-001855 - V-4108 - SV-52923r1_rule
RMF Control
AU-5
Severity
L
CCI
CCI-001855
Version
WN12-SO-000049
Vuln IDs
  • V-4108
Rule IDs
  • SV-52923r1_rule
When the audit log reaches a given percent full, an audit event is written to the security log. It is recorded as a successful audit event under the category of System. This option may be especially useful if the audit logs are set to be cleared manually.ECRR-1
Checks: C-47228r2_chk

If the system is configured to write to an audit server, or is configured to automatically archive full logs, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\Eventlog\Security\ Value Name: WarningLevel Value Type: REG_DWORD Value: 90 (or less)

Fix: F-45849r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "MSS: (WarningLevel) Percentage threshold for the security event log at which the system will generate a warning" to "90" or less. (See "Updating the Windows Security Options File" in the STIG Overview document if MSS settings are not visible in the system's policy tools.)

a
The system must be configured to prevent IP source routing.
CM-6 - Low - CCI-000366 - V-4110 - SV-52924r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-SO-000038
Vuln IDs
  • V-4110
Rule IDs
  • SV-52924r1_rule
Configuring the system to disable IP source routing protects against spoofing.ECSC-1
Checks: C-47229r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\Tcpip\Parameters\ Value Name: DisableIPSourceRouting Value Type: REG_DWORD Value: 2

Fix: F-45850r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "MSS: (DisableIPSourceRouting) IP source routing protection level (protects against packet spoofing)" to "Highest protection, source routing is completely disabled". (See "Updating the Windows Security Options File" in the STIG Overview document if MSS settings are not visible in the system's policy tools.)

a
The system must be configured to prevent Internet Control Message Protocol (ICMP) redirects from overriding Open Shortest Path First (OSPF) generated routes.
CM-6 - Low - CCI-000366 - V-4111 - SV-52925r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-SO-000039
Vuln IDs
  • V-4111
Rule IDs
  • SV-52925r1_rule
Allowing ICMP redirect of routes can lead to traffic not being routed properly. When disabled, this forces ICMP to be routed via shortest path first.ECSC-1
Checks: C-47230r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\Tcpip\Parameters\ Value Name: EnableICMPRedirect Value Type: REG_DWORD Value: 0

Fix: F-45851r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "MSS: (EnableICMPRedirect) Allow ICMP redirects to override OSPF generated routes" to "Disabled". (See "Updating the Windows Security Options File" in the STIG Overview document if MSS settings are not visible in the system's policy tools.)

a
The system must be configured to disable the Internet Router Discovery Protocol (IRDP).
SC-5 - Low - CCI-002385 - V-4112 - SV-52926r1_rule
RMF Control
SC-5
Severity
L
CCI
CCI-002385
Version
WN12-SO-000044
Vuln IDs
  • V-4112
Rule IDs
  • SV-52926r1_rule
The Internet Router Discovery Protocol (IRDP) is used to detect and configure default gateway addresses on the computer. If a router is impersonated on a network, traffic could be routed through the compromised system.ECSC-1
Checks: C-47231r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\Tcpip\Parameters\ Value Name: PerformRouterDiscovery Value Type: REG_DWORD Value: 0

Fix: F-45852r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "MSS: (PerformRouterDiscovery) Allow IRDP to detect and configure Default Gateway addresses (could lead to DoS)" to "Disabled". (See "Updating the Windows Security Options File" in the STIG Overview document if MSS settings are not visible in the system's policy tools.)

a
The system must be configured to limit how often keep-alive packets are sent.
SC-5 - Low - CCI-002385 - V-4113 - SV-52927r1_rule
RMF Control
SC-5
Severity
L
CCI
CCI-002385
Version
WN12-SO-000041
Vuln IDs
  • V-4113
Rule IDs
  • SV-52927r1_rule
This setting controls how often TCP sends a keep-alive packet in attempting to verify that an idle connection is still intact. A higher value could allow an attacker to cause a denial of service with numerous connections.ECSC-1
Checks: C-47232r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\Tcpip\Parameters\ Value Name: KeepAliveTime Value Type: REG_DWORD Value: 300000 (or less)

Fix: F-45853r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "MSS: (KeepAliveTime) How often keep-alive packets are sent in milliseconds" to "300000 or 5 minutes (recommended)" or less. (See "Updating the Windows Security Options File" in the STIG Overview document if MSS settings are not visible in the system's policy tools.)

a
The system must be configured to ignore NetBIOS name release requests except from WINS servers.
SC-5 - Low - CCI-002385 - V-4116 - SV-52928r1_rule
RMF Control
SC-5
Severity
L
CCI
CCI-002385
Version
WN12-SO-000043
Vuln IDs
  • V-4116
Rule IDs
  • SV-52928r1_rule
Configuring the system to ignore name release requests, except from WINS servers, prevents a denial of service (DoS) attack. The DoS consists of sending a NetBIOS name release request to the server for each entry in the server's cache, causing a response delay in the normal operation of the servers WINS resolution capability.ECSC-1
Checks: C-47233r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\Netbt\Parameters\ Value Name: NoNameReleaseOnDemand Value Type: REG_DWORD Value: 1

Fix: F-45854r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "MSS: (NoNameReleaseOnDemand) Allow computer to ignore NetBIOS name release requests except from WINS servers" to "Enabled". (See "Updating the Windows Security Options File" in the STIG Overview document if MSS settings are not visible in the system's policy tools.)

a
The system must limit how many times unacknowledged TCP data is retransmitted.
SC-5 - Low - CCI-002385 - V-4438 - SV-52929r1_rule
RMF Control
SC-5
Severity
L
CCI
CCI-002385
Version
WN12-SO-000048
Vuln IDs
  • V-4438
Rule IDs
  • SV-52929r1_rule
In a SYN flood attack, the attacker sends a continuous stream of SYN packets to a server, and the server leaves the half-open connections open until it is overwhelmed and is no longer able to respond to legitimate requests.ECSC-1
Checks: C-47234r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\Tcpip\Parameters\ Value Name: TcpMaxDataRetransmissions Value Type: REG_DWORD Value: 3 (or less)

Fix: F-45855r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "MSS: (TcpMaxDataRetransmissions) How many times unacknowledged data is retransmitted (3 recommended, 5 is the default)" to "3" or less. (See "Updating the Windows Security Options File" in the STIG Overview document if MSS settings are not visible in the system's policy tools.)

a
The system must be configured to have password protection take effect within a limited time frame when the screen saver becomes active.
CM-6 - Low - CCI-000366 - V-4442 - SV-52930r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-SO-000046
Vuln IDs
  • V-4442
Rule IDs
  • SV-52930r1_rule
Allowing more than several seconds makes the computer vulnerable to a potential attack from someone walking up to the console to attempt to log on to the system before the lock takes effect.PESL-1
Checks: C-47235r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows NT\CurrentVersion\Winlogon\ Value Name: ScreenSaverGracePeriod Value Type: REG_SZ Value: 5 (or less)

Fix: F-45856r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "MSS: (ScreenSaverGracePeriod) The time in seconds before the screen saver grace period expires (0 recommended)" to "5" or less. (See "Updating the Windows Security Options File" in the STIG Overview document if MSS settings are not visible in the system's policy tools.)

c
Unauthorized remotely accessible registry paths and sub-paths must not be configured.
SC-4 - High - CCI-001090 - V-4443 - SV-52931r1_rule
RMF Control
SC-4
Severity
H
CCI
CCI-001090
Version
WN12-SO-000057
Vuln IDs
  • V-4443
Rule IDs
  • SV-52931r1_rule
The registry is integral to the function, security, and stability of the Windows system. Some processes may require remote access to the registry. This setting controls which registry paths and sub-paths are accessible from a remote computer. These registry paths must be limited, as they could give unauthorized individuals access to the registry.ECCD-2, ECCD-1
Checks: C-47236r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\SecurePipeServers\Winreg\AllowedPaths\ Value Name: Machine Value Type: REG_MULTI_SZ Value: see below Software\Microsoft\OLAP Server Software\Microsoft\Windows NT\CurrentVersion\Perflib Software\Microsoft\Windows NT\CurrentVersion\Print Software\Microsoft\Windows NT\CurrentVersion\Windows System\CurrentControlSet\Control\ContentIndex System\CurrentControlSet\Control\Print\Printers System\CurrentControlSet\Control\Terminal Server System\CurrentControlSet\Control\Terminal Server\UserConfig System\CurrentControlSet\Control\Terminal Server\DefaultUserConfiguration System\CurrentControlSet\Services\Eventlog System\CurrentControlSet\Services\Sysmonlog Legitimate applications may add entries to this registry value. If an application requires these entries to function properly and is documented with the IAO, this would not be a finding. Documentation must contain supporting information from the vendor's instructions.

Fix: F-45857r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network access: Remotely accessible registry paths and sub-paths" with the following entries: Software\Microsoft\OLAP Server Software\Microsoft\Windows NT\CurrentVersion\Perflib Software\Microsoft\Windows NT\CurrentVersion\Print Software\Microsoft\Windows NT\CurrentVersion\Windows System\CurrentControlSet\Control\ContentIndex System\CurrentControlSet\Control\Print\Printers System\CurrentControlSet\Control\Terminal Server System\CurrentControlSet\Control\Terminal Server\UserConfig System\CurrentControlSet\Control\Terminal Server\DefaultUserConfiguration System\CurrentControlSet\Services\Eventlog System\CurrentControlSet\Services\Sysmonlog

a
Optional Subsystems must not be permitted to operate on the system.
CM-7 - Low - CCI-000381 - V-4445 - SV-52219r2_rule
RMF Control
CM-7
Severity
L
CCI
CCI-000381
Version
WN12-SO-000088
Vuln IDs
  • V-4445
Rule IDs
  • SV-52219r2_rule
The POSIX subsystem is an Institute of Electrical and Electronic Engineers (IEEE) standard that defines a set of operating system services. The POSIX Subsystem is required if the server supports applications that use that subsystem. The subsystem introduces a security risk relating to processes that can potentially persist across logins. That is, if a user starts a process and then logs out, there is a potential that the next user who logs in to the system could access the previous users process. This is dangerous because the process started by the first user may retain that users system privileges, and anything the second user does with that process will be performed with the privileges of the first user.HKECSC-1
Checks: C-46964r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\Session Manager\Subsystems\ Value Name: Optional Value Type: REG_MULTI_SZ Value: (Blank)

Fix: F-45238r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "System settings: Optional subsystems" to "Blank" (Configured with no entries).

b
Software certificate restriction policies must be enforced.
CM-6 - Medium - CCI-000366 - V-4446 - SV-52221r2_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-SO-000087
Vuln IDs
  • V-4446
Rule IDs
  • SV-52221r2_rule
Software restriction policies help to protect users and computers from executing unauthorized code such as viruses and Trojans horses. This setting must be enabled to enforce certificate rules in software restriction policies.HKECSC-1
Checks: C-46965r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\Safer\CodeIdentifiers\ Value Name: AuthenticodeEnabled Value Type: REG_DWORD Value: 1

Fix: F-45239r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "System settings: Use Certificate Rules on Windows Executables for Software Restriction Policies" to "Enabled".

b
The Remote Desktop Session Host must require secure RPC communications.
AC-17 - Medium - CCI-001453 - V-4447 - SV-52932r1_rule
RMF Control
AC-17
Severity
M
CCI
CCI-001453
Version
WN12-CC-000130
Vuln IDs
  • V-4447
Rule IDs
  • SV-52932r1_rule
Allowing unsecure RPC communication exposes the system to man-in-the-middle attacks and data disclosure attacks. A man-in-the-middle attack occurs when an intruder captures packets between a client and server and modifies them before allowing the packets to be exchanged. Usually the attacker will modify the information in the packets in an attempt to cause either the client or server to reveal sensitive information. ECSC-1
Checks: C-47237r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: fEncryptRPCTraffic Type: REG_DWORD Value: 1

Fix: F-45858r2_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Security -> "Require secure RPC communication" to "Enabled".

b
Group Policy objects must be reprocessed even if they have not changed.
CM-6 - Medium - CCI-000366 - V-4448 - SV-52933r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-CC-000028
Vuln IDs
  • V-4448
Rule IDs
  • SV-52933r1_rule
Enabling this setting and then selecting the "Process even if the Group Policy objects have not changed" option ensures that the policies will be reprocessed even if none have been changed. This way, any unauthorized changes are forced to match the domain-based group policy settings again.ECSC-1
Checks: C-47238r3_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\Group Policy\{35378EAC-683F-11D2-A89A-00C04FBBCFA2}\ Value Name: NoGPOListChanges Type: REG_DWORD Value: 0

Fix: F-45859r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Group Policy -> "Configure registry policy processing" to "Enabled" and select the option "Process even if the Group Policy objects have not changed".

b
Outgoing secure channel traffic must be encrypted or signed.
SC-8 - Medium - CCI-002418 - V-6831 - SV-52934r1_rule
RMF Control
SC-8
Severity
M
CCI
CCI-002418
Version
WN12-SO-000012
Vuln IDs
  • V-6831
Rule IDs
  • SV-52934r1_rule
Requests sent on the secure channel are authenticated, and sensitive information (such as passwords) is encrypted, but not all information is encrypted. If this policy is enabled, outgoing secure channel traffic will be encrypted and signed.ECCT-1, ECCT-2
Checks: C-47239r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: RequireSignOrSeal Value Type: REG_DWORD Value: 1

Fix: F-45860r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Domain member: Digitally encrypt or sign secure channel data (always)" to "Enabled".

b
The Windows SMB client must be configured to always perform SMB packet signing.
SC-8 - Medium - CCI-002418 - V-6832 - SV-52935r1_rule
RMF Control
SC-8
Severity
M
CCI
CCI-002418
Version
WN12-SO-000028
Vuln IDs
  • V-6832
Rule IDs
  • SV-52935r1_rule
The server message block (SMB) protocol provides the basis for many network operations. Digitally signed SMB packets aid in preventing man-in-the-middle attacks. If this policy is enabled, the SMB client will only communicate with an SMB server that performs SMB packet signing.ECSC-1
Checks: C-47240r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\LanmanWorkstation\Parameters\ Value Name: RequireSecuritySignature Value Type: REG_DWORD Value: 1

Fix: F-45861r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Microsoft network client: Digitally sign communications (always)" to "Enabled".

b
The Windows SMB server must be configured to always perform SMB packet signing.
SC-8 - Medium - CCI-002418 - V-6833 - SV-52936r1_rule
RMF Control
SC-8
Severity
M
CCI
CCI-002418
Version
WN12-SO-000032
Vuln IDs
  • V-6833
Rule IDs
  • SV-52936r1_rule
The server message block (SMB) protocol provides the basis for many network operations. Digitally signed SMB packets aid in preventing man-in-the-middle attacks. If this policy is enabled, the SMB server will only communicate with an SMB client that performs SMB packet signing.ECSC-1
Checks: C-47241r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\LanManServer\Parameters\ Value Name: RequireSecuritySignature Value Type: REG_DWORD Value: 1

Fix: F-45862r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Microsoft network server: Digitally sign communications (always)" to "Enabled".

c
Anonymous access to Named Pipes and Shares must be restricted.
SC-4 - High - CCI-001090 - V-6834 - SV-52937r1_rule
RMF Control
SC-4
Severity
H
CCI
CCI-001090
Version
WN12-SO-000058
Vuln IDs
  • V-6834
Rule IDs
  • SV-52937r1_rule
Allowing anonymous access to named pipes or shares provides the potential for unauthorized system access. This setting restricts access to those defined in "Network access: Named Pipes that can be accessed anonymously" and "Network access: Shares that can be accessed anonymously", both of which must be blank under other requirements.ECSC-1
Checks: C-47242r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\LanManServer\Parameters\ Value Name: RestrictNullSessAccess Value Type: REG_DWORD Value: 1

Fix: F-45863r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network access: Restrict anonymous access to Named Pipes and Shares" to "Enabled".

b
Passwords must, at a minimum, be 14 characters.
IA-5 - Medium - CCI-000205 - V-6836 - SV-52938r1_rule
RMF Control
IA-5
Severity
M
CCI
CCI-000205
Version
WN12-AC-000007
Vuln IDs
  • V-6836
Rule IDs
  • SV-52938r1_rule
Information systems not protected with strong password schemes (including passwords of minimum length) provide the opportunity for anyone to crack the password, thus gaining access to the system and compromising the device, information, or the local network. IAIA-2, IAIA-1
Checks: C-47243r2_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Account Policies -> Password Policy. If the value for the "Minimum password length," is less than "14" characters, this is a finding.

Fix: F-45864r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Account Policies -> Password Policy -> "Minimum password length" to "14" characters.

b
System mechanisms must be implemented to enforce automatic expiration of passwords.
IA-5 - Medium - CCI-000199 - V-6840 - SV-52939r2_rule
RMF Control
IA-5
Severity
M
CCI
CCI-000199
Version
WN12-GE-000016
Vuln IDs
  • V-6840
Rule IDs
  • SV-52939r2_rule
Passwords that do not expire or are reused increase the exposure of a password with greater probability of being discovered or cracked. IAIA-2, IAIA-1
Checks: C-47245r4_chk

Run the DUMPSEC utility. Select "Dump Users as Table" from the "Report" menu. Select the following fields, and click "Add" for each entry: UserName SID PswdExpires AcctDisabled Groups If any accounts have "No" in the "PswdExpires" column, this is a finding. The following are exempt from this requirement: Application Accounts Domain accounts requiring smart card (CAC/PIV) The following PowerShell command may be used on domain controllers to list accounts with the Password Never Expires flag: Search-ADAccount -PasswordNeverExpires -UsersOnly

Fix: F-45865r1_fix

Configure all passwords to expire. Ensure "Password never expires" is not checked on any accounts. Document any exceptions with the IAO.

c
Accounts must require passwords.
IA-2 - High - CCI-000764 - V-7002 - SV-52940r1_rule
RMF Control
IA-2
Severity
H
CCI
CCI-000764
Version
WN12-GE-000015
Vuln IDs
  • V-7002
Rule IDs
  • SV-52940r1_rule
The lack of password protection enables anyone to gain access to the information system, which opens a backdoor opportunity for intruders to compromise the system as well as other resources. Accounts on a system must require passwords.IAIA-2, IAIA-1
Checks: C-47246r2_chk

Verify all accounts require passwords. Run the DUMPSEC utility. Select "Dump Users as Table" from the "Report" menu. Select the following fields, and click "Add" for each entry: UserName SID PswdRequired AcctDisabled Groups If any accounts have "No" in the "PswdRequired" column, this is a finding. Some built-in or application-generated accounts (e.g., Guest, IWAM_, IUSR, etc.) may not have this flag set, even though there are passwords present. It can be set by entering the following on a command line: "Net user <account_name> /passwordreq:yes".

Fix: F-45866r2_fix

Ensure all accounts are configured to require passwords to gain access. The password required flag can be set by entering the following on a command line: "Net user <account_name> /passwordreq:yes".

a
The system must be configured to prevent the display of the last username on the logon screen.
CM-6 - Low - CCI-000366 - V-11806 - SV-52941r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-SO-000018
Vuln IDs
  • V-11806
Rule IDs
  • SV-52941r1_rule
Displaying the username of the last logged on user provides half of the userid/password equation that an unauthorized person would need to gain access. The username of the last user to log on to a system must not be displayed.ECSC-1
Checks: C-47247r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: DontDisplayLastUserName Value Type: REG_DWORD Value: 1

Fix: F-45867r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Interactive logon: Do not display last user name" to "Enabled".

b
Passwords for the built-in Administrator account must be changed at least annually or when a member of the administrative team leaves the organization.
AC-2 - Medium - CCI-002142 - V-14225 - SV-52942r1_rule
RMF Control
AC-2
Severity
M
CCI
CCI-002142
Version
WN12-00-000007
Vuln IDs
  • V-14225
Rule IDs
  • SV-52942r1_rule
The longer a password is in use, the greater the opportunity for someone to gain unauthorized knowledge of the password. Passwords for the built-in Administrator account must be changed at least annually or when any member of the administrative team leaves the organization.ECPA-1
Checks: C-47248r2_chk

Determine if any system administrators have left the organization within the last year. Run the DUMPSEC utility. Select "Dump Users as Table" from the "Report" menu. Select the following fields, and click "Add" for each entry: UserName SID PwsdLastSetTime If the built-in Administrator account has a date older than one year in the "PwsdLastSetTime" column, this is a finding. If any system administrators has left the organization within the last year and the "PwsdLastSetTime" field reflects the built-in Administrator account password was not changed at that time, this is a finding.

Fix: F-45868r1_fix

Change the built-in Administrator account password at least annually or whenever an administrator leaves the organization.

b
Auditing the Access of Global System Objects must be turned off.
SC-5 - Medium - CCI-001095 - V-14228 - SV-53129r1_rule
RMF Control
SC-5
Severity
M
CCI
CCI-001095
Version
WN12-SO-000007
Vuln IDs
  • V-14228
Rule IDs
  • SV-53129r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. This setting prevents the system from setting up a default system access control list for certain system objects, which could create a very large number of security events, filling the security log in Windows and making it difficult to identify actual issues.ECSC-1
Checks: C-47435r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\Lsa\ Value Name: AuditBaseObjects Value Type: REG_DWORD Value: 0

Fix: F-46055r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Audit: Audit the access of global system objects" to "Disabled".

b
Auditing of Backup and Restore Privileges must be turned off.
SC-5 - Medium - CCI-001095 - V-14229 - SV-52943r1_rule
RMF Control
SC-5
Severity
M
CCI
CCI-001095
Version
WN12-SO-000008
Vuln IDs
  • V-14229
Rule IDs
  • SV-52943r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. This setting prevents the system from generating audit events for every file backed up or restored, which could fill the security log in Windows, making it difficult to identify actual issues.ECSC-1
Checks: C-47249r3_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\Lsa\ Value Name: FullPrivilegeAuditing Value Type: REG_BINARY Value: 0

Fix: F-45869r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Audit: Audit the use of Backup and Restore privilege" to "Disabled".

b
Audit policy using subcategories must be enabled.
AU-12 - Medium - CCI-000169 - V-14230 - SV-52944r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000169
Version
WN12-SO-000009
Vuln IDs
  • V-14230
Rule IDs
  • SV-52944r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. This setting allows administrators to enable more precise auditing capabilities.ECSC-1
Checks: C-47250r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\Lsa\ Value Name: SCENoApplyLegacyAuditPolicy Value Type: REG_DWORD Value: 1

Fix: F-45870r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" to "Enabled".

a
IPSec Exemptions must be limited.
CM-6 - Low - CCI-000366 - V-14232 - SV-52945r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-SO-000042
Vuln IDs
  • V-14232
Rule IDs
  • SV-52945r1_rule
IPSec exemption filters allow specific traffic that may be needed by the system for such things as Kerberos authentication. This setting configures Windows for specific IPSec exemptions.ECSC-1
Checks: C-47251r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\IPSEC\ Value Name: NoDefaultExempt Value Type: REG_DWORD Value: 3

Fix: F-45871r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "MSS: (NoDefaultExempt) Configure IPSec exemptions for various types of network traffic" to "Only ISAKMP is exempt (recommended for Windows Server 2003)". (See "Updating the Windows Security Options File" in the STIG Overview document if MSS settings are not visible in the system's policy tools.)

b
User Account Control approval mode for the built-in Administrator must be enabled.
IA-11 - Medium - CCI-002038 - V-14234 - SV-52946r1_rule
RMF Control
IA-11
Severity
M
CCI
CCI-002038
Version
WN12-SO-000077
Vuln IDs
  • V-14234
Rule IDs
  • SV-52946r1_rule
User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting configures the built-in Administrator account so that it runs in Admin Approval Mode.ECCD-2, ECCD-1
Checks: C-47252r2_chk

UAC requirements are NA on Server Core installations. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: FilterAdministratorToken Value Type: REG_DWORD Value: 1

Fix: F-45872r2_fix

UAC requirements are NA on Server Core installations. Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "User Account Control: Admin Approval Mode for the Built-in Administrator account" to "Enabled".

b
User Account Control must, at minimum, prompt administrators for consent.
SC-3 - Medium - CCI-001084 - V-14235 - SV-52947r1_rule
RMF Control
SC-3
Severity
M
CCI
CCI-001084
Version
WN12-SO-000078
Vuln IDs
  • V-14235
Rule IDs
  • SV-52947r1_rule
User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting configures the elevation requirements for logged on administrators to complete a task that requires raised privileges.ECCD-1, ECCD-2
Checks: C-47253r2_chk

UAC requirements are NA on Server Core installations. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: ConsentPromptBehaviorAdmin Value Type: REG_DWORD Value: 4 (Prompt for consent) 3 (Prompt for credentials) 2 (Prompt for consent on the secure desktop) 1 (Prompt for credentials on the secure desktop)

Fix: F-45873r2_fix

UAC requirements are NA on Server Core installations. Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode" to "Prompt for consent". More secure options for this setting would also be acceptable (e.g., Prompt for credentials, Prompt for consent (or credentials) on the secure desktop).

b
User Account Control must automatically deny standard user requests for elevation.
IA-11 - Medium - CCI-002038 - V-14236 - SV-52948r1_rule
RMF Control
IA-11
Severity
M
CCI
CCI-002038
Version
WN12-SO-000079
Vuln IDs
  • V-14236
Rule IDs
  • SV-52948r1_rule
User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting controls the behavior of elevation when requested by a standard user account.ECCD-2, ECCD-1
Checks: C-47254r2_chk

UAC requirements are NA on Server Core installations. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: ConsentPromptBehaviorUser Value Type: REG_DWORD Value: 0

Fix: F-45874r2_fix

UAC requirements are NA on Server Core installations. Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "User Account Control: Behavior of the elevation prompt for standard users" to "Automatically deny elevation requests".

b
User Account Control must be configured to detect application installations and prompt for elevation.
SC-3 - Medium - CCI-001084 - V-14237 - SV-52949r1_rule
RMF Control
SC-3
Severity
M
CCI
CCI-001084
Version
WN12-SO-000080
Vuln IDs
  • V-14237
Rule IDs
  • SV-52949r1_rule
User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting requires Windows to respond to application installation requests by prompting for credentials.ECCD-1, ECCD-2
Checks: C-47255r2_chk

UAC requirements are NA on Server Core installations. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: EnableInstallerDetection Value Type: REG_DWORD Value: 1

Fix: F-45875r2_fix

UAC requirements are NA on Server Core installations. Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "User Account Control: Detect application installations and prompt for elevation" to "Enabled".

b
User Account Control must only elevate UIAccess applications that are installed in secure locations.
SC-3 - Medium - CCI-001084 - V-14239 - SV-52950r1_rule
RMF Control
SC-3
Severity
M
CCI
CCI-001084
Version
WN12-SO-000082
Vuln IDs
  • V-14239
Rule IDs
  • SV-52950r1_rule
User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting configures Windows to only allow applications installed in a secure location on the file system, such as the Program Files or the Windows\System32 folders, to run with elevated privileges.ECCD-1, ECCD-2
Checks: C-47256r2_chk

UAC requirements are NA on Server Core installations. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: EnableSecureUIAPaths Value Type: REG_DWORD Value: 1

Fix: F-45876r2_fix

UAC requirements are NA on Server Core installations. Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "User Account Control: Only elevate UIAccess applications that are installed in secure locations" to "Enabled".

b
User Account Control must run all administrators in Admin Approval Mode, enabling UAC.
IA-11 - Medium - CCI-002038 - V-14240 - SV-52951r1_rule
RMF Control
IA-11
Severity
M
CCI
CCI-002038
Version
WN12-SO-000083
Vuln IDs
  • V-14240
Rule IDs
  • SV-52951r1_rule
User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting enables UAC.ECCD-1, ECCD-2
Checks: C-47257r2_chk

UAC requirements are NA on Server Core installations. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: EnableLUA Value Type: REG_DWORD Value: 1

Fix: F-45877r2_fix

UAC requirements are NA on Server Core installations. Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "User Account Control: Run all administrators in Admin Approval Mode" to "Enabled".

b
User Account Control must switch to the secure desktop when prompting for elevation.
SC-3 - Medium - CCI-001084 - V-14241 - SV-52952r1_rule
RMF Control
SC-3
Severity
M
CCI
CCI-001084
Version
WN12-SO-000084
Vuln IDs
  • V-14241
Rule IDs
  • SV-52952r1_rule
User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting ensures that the elevation prompt is only used in secure desktop mode.ECCD-1, ECCD-2
Checks: C-47258r2_chk

UAC requirements are NA on Server Core installations. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: PromptOnSecureDesktop Value Type: REG_DWORD Value: 1

Fix: F-45878r2_fix

UAC requirements are NA on Server Core installations. Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "User Account Control: Switch to the secure desktop when prompting for elevation" to "Enabled".

b
User Account Control must virtualize file and registry write failures to per-user locations.
SC-3 - Medium - CCI-001084 - V-14242 - SV-52953r1_rule
RMF Control
SC-3
Severity
M
CCI
CCI-001084
Version
WN12-SO-000085
Vuln IDs
  • V-14242
Rule IDs
  • SV-52953r1_rule
User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting configures non-UAC-compliant applications to run in virtualized file and registry entries in per-user locations, allowing them to run.ECCD-2, ECCD-1
Checks: C-47259r1_chk

UAC requirements are NA on Server Core installations. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: EnableVirtualization Value Type: REG_DWORD Value: 1

Fix: F-45879r2_fix

UAC requirements are NA on Server Core installations. Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "User Account Control: Virtualize file and registry write failures to per-user locations" to "Enabled".

b
The system must require username and password to elevate a running application.
SC-3 - Medium - CCI-001084 - V-14243 - SV-52955r1_rule
RMF Control
SC-3
Severity
M
CCI
CCI-001084
Version
WN12-CC-000077
Vuln IDs
  • V-14243
Rule IDs
  • SV-52955r1_rule
Enumeration of administrator accounts when elevating can provide part of the logon information to an unauthorized user. This setting configures the system to always require users to type in a username and password to elevate a running application.ECSC-1
Checks: C-47261r3_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\CredUI\ Value Name: EnumerateAdministrators Type: REG_DWORD Value: 0

Fix: F-45881r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Credential User Interface -> "Enumerate administrator accounts on elevation" to "Disabled".

b
Passwords must not be saved in the Remote Desktop Client.
IA-11 - Medium - CCI-002038 - V-14247 - SV-52958r1_rule
RMF Control
IA-11
Severity
M
CCI
CCI-002038
Version
WN12-CC-000096
Vuln IDs
  • V-14247
Rule IDs
  • SV-52958r1_rule
Saving passwords in the Remote Desktop Client could allow an unauthorized user to establish a remote desktop session to another system. The system must be configured to prevent users from saving passwords in the Remote Desktop Client.ECSC-1
Checks: C-47264r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: DisablePasswordSaving Type: REG_DWORD Value: 1

Fix: F-45884r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Connection Client -> "Do not allow passwords to be saved" to "Enabled".

b
Local drives must be prevented from sharing with Remote Desktop Session Hosts. (Remote Desktop Services Role).
SC-4 - Medium - CCI-001090 - V-14249 - SV-52959r1_rule
RMF Control
SC-4
Severity
M
CCI
CCI-001090
Version
WN12-CC-000098
Vuln IDs
  • V-14249
Rule IDs
  • SV-52959r1_rule
Preventing users from sharing the local drives on their client computers to Remote Session Hosts that they access helps reduce possible exposure of sensitive data.ECSC-1
Checks: C-47265r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: fDisableCdm Type: REG_DWORD Value: 1

Fix: F-45885r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Device and Resource Redirection -> "Do not allow drive redirection" to "Enabled".

b
Automatic Updates must not be used (unless configured to point to a DoD server).
CM-6 - Medium - CCI-000366 - V-14250 - SV-52985r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-CC-000129
Vuln IDs
  • V-14250
Rule IDs
  • SV-52985r1_rule
Uncontrolled system updates can introduce issues to a system. The system must be configured to prevent Automatic Updates from being run unless directed to a DoD Windows Server Update Services (WSUS) server.DCSL-1
Checks: C-47291r3_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\WindowsUpdate\AU\ Value Name: NoAutoUpdate Type: REG_DWORD Value: 1 If the site is using a DoD WSUS server to distribute software updates, and the computer is configured to point at that server, this can be set to "Enabled". In this instance, the setting will not be considered a finding. To determine whether WSUS is being used, verify the following registry key value exists and is pointing to an organizational or DoD WSUS URL: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\WindowsUpdate\ Value Name: WUServer Type: REG_SZ Value: "URL of DoD WSUS"

Fix: F-45911r2_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Update -> "Configure Automatic Updates" to "Disabled". If the site is using a DoD WSUS server to distribute software updates, the policy setting to configure the WSUS URL is Computer Configuration -> Administrative Templates -> Windows Components -> Windows Update -> "Specify intranet Microsoft update service location".

b
Unauthenticated RPC clients must be restricted from connecting to the RPC server.
IA-3 - Medium - CCI-001967 - V-14253 - SV-52988r1_rule
RMF Control
IA-3
Severity
M
CCI
CCI-001967
Version
WN12-CC-000064
Vuln IDs
  • V-14253
Rule IDs
  • SV-52988r1_rule
Configuring RPC to restrict unauthenticated RPC clients from connecting to the RPC server will prevent anonymous connections.ECSC-1
Checks: C-47294r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Rpc\ Value Name: RestrictRemoteClients Type: REG_DWORD Value: 1

Fix: F-45914r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Remote Procedure Call -> "Restrict Unauthenticated RPC clients" to "Enabled" and "Authenticated".

b
Client computers must be required to authenticate for RPC communication.
IA-3 - Medium - CCI-001967 - V-14254 - SV-52989r1_rule
RMF Control
IA-3
Severity
M
CCI
CCI-001967
Version
WN12-CC-000063
Vuln IDs
  • V-14254
Rule IDs
  • SV-52989r1_rule
Configuring RPC to require authentication to the RPC Endpoint Mapper will force clients to provide authentication before RPC communication is established.ECSC-1
Checks: C-47295r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Rpc\ Value Name: EnableAuthEpResolution Type: REG_DWORD Value: 1

Fix: F-45915r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Remote Procedure Call -> "Enable RPC Endpoint Mapper Client Authentication" to "Enabled.

b
Printing over HTTP must be prevented.
CM-7 - Medium - CCI-000381 - V-14259 - SV-52997r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000039
Vuln IDs
  • V-14259
Rule IDs
  • SV-52997r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting prevents the client computer from printing over HTTP, which allows the computer to print to printers on the intranet as well as the Internet.ECSC-1
Checks: C-47304r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Printers\ Value Name: DisableHTTPPrinting Type: REG_DWORD Value: 1

Fix: F-45924r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication settings -> "Turn off printing over HTTP" to "Enabled".

b
Downloading print driver packages over HTTP must be prevented.
CM-7 - Medium - CCI-000381 - V-14260 - SV-52998r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000032
Vuln IDs
  • V-14260
Rule IDs
  • SV-52998r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting prevents the computer from downloading print driver packages over HTTP.ECSC-1
Checks: C-47305r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Printers\ Value Name: DisableWebPnPDownload Type: REG_DWORD Value: 1

Fix: F-45925r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication settings -> "Turn off downloading of print drivers over HTTP" to "Enabled".

b
Windows must be prevented from using Windows Update to search for drivers.
CM-11 - Medium - CCI-001812 - V-14261 - SV-53000r1_rule
RMF Control
CM-11
Severity
M
CCI
CCI-001812
Version
WN12-CC-000047
Vuln IDs
  • V-14261
Rule IDs
  • SV-53000r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting prevents Windows from searching Windows Update for device drivers when no local drivers for a device are present.DCSL-1
Checks: C-47307r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\DriverSearching\ Value Name: DontSearchWindowsUpdate Type: REG_DWORD Value: 1

Fix: F-45927r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication settings -> "Turn off Windows Update device driver searching" to "Enabled".

b
Zone information must be preserved when saving attachments.
CM-6 - Medium - CCI-000366 - V-14268 - SV-53002r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-UC-000009
Vuln IDs
  • V-14268
Rule IDs
  • SV-53002r1_rule
Preserving zone of origin (internet, intranet, local, restricted) information on file attachments allows Windows to determine risk.ECSC-1
Checks: C-47309r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_CURRENT_USER Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\Attachments\ Value Name: SaveZoneInformation Type: REG_DWORD Value: 2

Fix: F-45929r1_fix

Configure the policy value for User Configuration -> Administrative Templates -> Windows Components -> Attachment Manager -> "Do not preserve zone information in file attachments" to "Disabled".

b
Mechanisms for removing zone information from file attachments must be hidden.
CM-6 - Medium - CCI-000366 - V-14269 - SV-53004r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-UC-000010
Vuln IDs
  • V-14269
Rule IDs
  • SV-53004r1_rule
Preserving zone of origin (internet, intranet, local, restricted) information on file attachments allows Windows to determine risk. This setting prevents users from manually removing zone information from saved file attachments.ECSC-1
Checks: C-47311r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_CURRENT_USER Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\Attachments\ Value Name: HideZoneInfoOnProperties Type: REG_DWORD Value: 1

Fix: F-45931r1_fix

Configure the policy value for User Configuration -> Administrative Templates -> Windows Components -> Attachment Manager -> "Hide mechanisms to remove zone information" to "Enabled".

b
The system must notify antivirus when file attachments are opened.
CM-6 - Medium - CCI-000366 - V-14270 - SV-53006r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-UC-000011
Vuln IDs
  • V-14270
Rule IDs
  • SV-53006r1_rule
Attaching malicious files is a known avenue of attack. This setting configures the system to notify antivirus programs when a user opens a file attachment.ECVP-1
Checks: C-47313r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_CURRENT_USER Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\Attachments\ Value Name: ScanWithAntiVirus Type: REG_DWORD Value: 3

Fix: F-45933r1_fix

Configure the policy value for User Configuration -> Administrative Templates -> Windows Components -> Attachment Manager -> "Notify antivirus programs when opening attachments" to "Enabled".

b
The HBSS McAfee Agent must be installed.
CM-6 - Medium - CCI-000366 - V-15505 - SV-53010r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-GE-000019
Vuln IDs
  • V-15505
Rule IDs
  • SV-53010r1_rule
ECSC-1
Checks: C-47316r2_chk

Search for the file FrameworkService.exe (by default in the \Program Files\McAfee\Common Framework\ directory) and check that the version is 4 or above. Also verify that the Service "McAfee Framework Service" is running. If either of these conditions does not exist, this is a finding.

Fix: F-45937r1_fix

Deploy the McAfee Agent as detailed in accordance with the DoD HBSS STIG.

b
Windows Peer-to-Peer networking services must be turned off.
CM-7 - Medium - CCI-000381 - V-15666 - SV-53012r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000003
Vuln IDs
  • V-15666
Rule IDs
  • SV-53012r1_rule
Peer-to-Peer applications can allow unauthorized access to a system and exposure of sensitive data. This setting will turn off the Microsoft Peer-to-Peer Networking Service.ECSC-1
Checks: C-47319r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Peernet\ Value Name: Disabled Type: REG_DWORD Value: 1

Fix: F-45939r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Network -> Microsoft Peer-to-Peer Networking Services -> "Turn off Microsoft Peer-to-Peer Networking Services" to "Enabled".

b
Network Bridges must be prohibited in Windows.
CM-7 - Medium - CCI-000381 - V-15667 - SV-53014r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000004
Vuln IDs
  • V-15667
Rule IDs
  • SV-53014r1_rule
A Network Bridge can connect two or more network segments, allowing unauthorized access or exposure of sensitive data. This setting prevents a Network Bridge from being installed and configured. ECSC-1
Checks: C-47321r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\Network Connections\ Value Name: NC_AllowNetBridge_NLA Type: REG_DWORD Value: 0

Fix: F-45941r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Network -> Network Connections -> "Prohibit installation and configuration of Network Bridge on your DNS domain network" to "Enabled".

a
Root Certificates must not be updated automatically from the Microsoft site.
IA-5 - Low - CCI-000185 - V-15671 - SV-53015r1_rule
RMF Control
IA-5
Severity
L
CCI
CCI-000185
Version
WN12-CC-000031
Vuln IDs
  • V-15671
Rule IDs
  • SV-53015r1_rule
Root Certificate updates must be controlled in the enterprise to ensure a proper validation chain is maintained. This setting prevents root certificates from being updated automatically from the Microsoft site.ECSC-1
Checks: C-47322r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\SystemCertificates\AuthRoot\ Value Name: DisableRootAutoUpdate Type: REG_DWORD Value: 1

Fix: F-45942r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication settings -> "Turn off Automatic Root Certificates Update" to "Enabled".

a
Event Viewer Events.asp links must be turned off.
CM-7 - Low - CCI-000381 - V-15672 - SV-53017r1_rule
RMF Control
CM-7
Severity
L
CCI
CCI-000381
Version
WN12-CC-000033
Vuln IDs
  • V-15672
Rule IDs
  • SV-53017r1_rule
Viewing events is a function of administrators, who must not access the internet with privileged accounts. This setting will disable Events.asp hyperlinks in Event Viewer to prevent links to the internet from within events.ECSC-1
Checks: C-47324r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\EventViewer\ Value Name: MicrosoftEventVwrDisableLinks Type: REG_DWORD Value: 1

Fix: F-45944r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication settings -> "Turn off Event Viewer "Events.asp" links" to "Enabled".

b
The Internet File Association service must be turned off.
CM-7 - Medium - CCI-000381 - V-15674 - SV-53021r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000038
Vuln IDs
  • V-15674
Rule IDs
  • SV-53021r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting prevents unhandled file associations from using the Microsoft Web service to find an application.ECSC-1
Checks: C-47327r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\ Value Name: NoInternetOpenWith Type: REG_DWORD Value: 1

Fix: F-45947r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication settings -> "Turn off Internet File Association service" to "Enabled".

a
The classic logon screen must be required for user logons.
CM-6 - Low - CCI-000366 - V-15680 - SV-53036r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-CC-000049
Vuln IDs
  • V-15680
Rule IDs
  • SV-53036r1_rule
The classic logon screen requires users to enter a logon name and password to access a system. The simple logon screen or Welcome screen displays usernames for selection, providing part of the necessary logon information.ECSC-1
Checks: C-47341r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: LogonType Type: REG_DWORD Value: 0

Fix: F-45962r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Logon -> "Always use classic logon" to "Enabled".

b
Attachments must be prevented from being downloaded from RSS feeds.
CM-6 - Medium - CCI-000366 - V-15682 - SV-53040r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-CC-000105
Vuln IDs
  • V-15682
Rule IDs
  • SV-53040r1_rule
Attachments from RSS feeds may not be secure. This setting will prevent attachments from being downloaded from RSS feeds.ECSC-1
Checks: C-47346r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Internet Explorer\Feeds\ Value Name: DisableEnclosureDownload Type: REG_DWORD Value: 1

Fix: F-45966r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> RSS Feeds -> "Prevent downloading of enclosures" to "Enabled".

b
File Explorer shell protocol must run in protected mode.
CM-6 - Medium - CCI-000366 - V-15683 - SV-53045r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-CC-000091
Vuln IDs
  • V-15683
Rule IDs
  • SV-53045r1_rule
The shell protocol will limit the set of folders applications can open when run in protected mode. Restricting files an application can open to a limited set of folders increases the security of Windows.ECSC-1
Checks: C-47350r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\ Value Name: PreXPSP2ShellProtocolBehavior Type: REG_DWORD Value: 0

Fix: F-45971r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> File Explorer -> "Turn off shell protocol protected mode" to "Disabled".

b
Users must be notified if a web-based program attempts to install software.
CM-6 - Medium - CCI-000366 - V-15684 - SV-53056r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-CC-000117
Vuln IDs
  • V-15684
Rule IDs
  • SV-53056r1_rule
Users must be aware of attempted program installations. This setting ensures users are notified if a web-based program attempts to install software. ECSC-1
Checks: C-47359r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\Installer\ Value Name: SafeForScripting Type: REG_DWORD Value: 0

Fix: F-45982r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Installer -> "Prevent Internet Explorer security prompt for Windows Installer scripts" to "Disabled".

b
Users must be prevented from changing installation options.
CM-11 - Medium - CCI-001812 - V-15685 - SV-53061r1_rule
RMF Control
CM-11
Severity
M
CCI
CCI-001812
Version
WN12-CC-000115
Vuln IDs
  • V-15685
Rule IDs
  • SV-53061r1_rule
Installation options for applications are typically controlled by administrators. This setting prevents users from changing installation options that may bypass security features.ECSC-1
Checks: C-47366r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\Installer\ Value Name: EnableUserControl Type: REG_DWORD Value: 0

Fix: F-45986r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Installer -> "Allow user control over installs" to "Disabled".

a
Nonadministrators must be prevented from applying vendor-signed updates.
CM-11 - Low - CCI-001812 - V-15686 - SV-53065r1_rule
RMF Control
CM-11
Severity
L
CCI
CCI-001812
Version
WN12-CC-000118
Vuln IDs
  • V-15686
Rule IDs
  • SV-53065r1_rule
Uncontrolled system updates can introduce issues to a system. This setting will prevent users from applying vendor-signed updates (though they may be from a trusted source).ECSC-1
Checks: C-47371r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\Installer\ Value Name: DisableLUAPatching Type: REG_DWORD Value: 1

Fix: F-45991r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Installer -> "Prohibit non-administrators from applying vendor signed updates" to "Enabled".

a
Users must not be presented with Privacy and Installation options on first use of Windows Media Player.
CM-6 - Low - CCI-000366 - V-15687 - SV-53069r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-CC-000121
Vuln IDs
  • V-15687
Rule IDs
  • SV-53069r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting prevents users from being presented with Privacy and Installation options on first use of Windows Media Player, which could enable some communication with the vendor.ECSC-1
Checks: C-47374r2_chk

Windows Media Player is not installed by default. If it is not installed, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\WindowsMediaPlayer\ Value Name: GroupPrivacyAcceptance Type: REG_DWORD Value: 1

Fix: F-45995r1_fix

If Windows Media Player is installed, configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Media Player -> "Do Not Show First Use Dialog Boxes" to "Enabled".

b
The Mapper I/O network protocol (LLTDIO) driver must be disabled.
CM-7 - Medium - CCI-000381 - V-15696 - SV-53072r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000001
Vuln IDs
  • V-15696
Rule IDs
  • SV-53072r1_rule
The Mapper I/O network protocol (LLTDIO) driver allows the discovery of the connected network and allows various options to be enabled. Disabling this helps protect the system from potentially discovering and connecting to unauthorized devices.ECSC-1
Checks: C-47378r2_chk

If the following registry values do not exist or are not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\LLTD\ Value Name: AllowLLTDIOOndomain Value Name: AllowLLTDIOOnPublicNet Value Name: EnableLLTDIO Value Name: ProhibitLLTDIOOnPrivateNet Type: REG_DWORD Value: 0

Fix: F-45998r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Network -> Link-Layer Topology Discovery -> "Turn on Mapper I/O (LLTDIO) driver" to "Disabled".

b
The Responder network protocol driver must be disabled.
CM-7 - Medium - CCI-000381 - V-15697 - SV-53081r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000002
Vuln IDs
  • V-15697
Rule IDs
  • SV-53081r1_rule
The Responder network protocol driver allows a computer to be discovered and located on a network. Disabling this helps protect the system from potentially being discovered and connected to by unauthorized devices.ECSC-1
Checks: C-47387r2_chk

If the following registry values do not exist or are not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\LLTD\ Value Name: AllowRspndrOndomain Value Name: AllowRspndrOnPublicNet Value Name: EnableRspndr Value Name: ProhibitRspndrOnPrivateNet Type: REG_DWORD Value: 0

Fix: F-46007r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Network -> Link-Layer Topology Discovery -> "Turn on Responder (RSPNDR) driver" to "Disabled".

b
The configuration of wireless devices using Windows Connect Now must be disabled.
CM-7 - Medium - CCI-000381 - V-15698 - SV-53085r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000012
Vuln IDs
  • V-15698
Rule IDs
  • SV-53085r1_rule
Windows Connect Now allows the discovery and configuration of devices over wireless. Wireless devices must be managed. If a rogue device is connected to a system, there is potential for sensitive information to be compromised.ECSC-1
Checks: C-47391r2_chk

If the following registry values do not exist or are not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\WCN\Registrars\ Value Name: DisableFlashConfigRegistrar Value Name: DisableInBand802DOT11Registrar Value Name: DisableUPnPRegistrar Value Name: DisableWPDRegistrar Value Name: EnableRegistrars Type: REG_DWORD Value: 0

Fix: F-46011r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Network -> Windows Connect Now -> "Configuration of wireless settings using Windows Connect Now" to "Disabled".

b
The Windows Connect Now wizards must be disabled.
CM-7 - Medium - CCI-000381 - V-15699 - SV-53089r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000013
Vuln IDs
  • V-15699
Rule IDs
  • SV-53089r1_rule
Windows Connect Now provides wizards for tasks such as "Set up a wireless router or access point" and must not be available to users. Functions such as these may allow unauthorized connections to a system and the potential for sensitive information to be compromised.ECSC-1
Checks: C-47395r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\WCN\UI\ Value Name: DisableWcnUi Type: REG_DWORD Value: 1

Fix: F-46015r2_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Network -> Windows Connect Now -> "Prohibit access of the Windows Connect Now wizards" to "Enabled".

b
Remote access to the Plug and Play interface must be disabled for device installation.
CM-7 - Medium - CCI-000381 - V-15700 - SV-53094r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000019
Vuln IDs
  • V-15700
Rule IDs
  • SV-53094r1_rule
Remote access to the Plug and Play interface could potentially allow connections by unauthorized devices. This setting configures remote access to the Plug and Play interface and must be disabled.ECSC-1
Checks: C-47400r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\DeviceInstall\Settings\ Value Name: AllowRemoteRPC Type: REG_DWORD Value: 0

Fix: F-46020r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Device Installation -> "Allow remote access to the Plug and Play interface" to "Disabled".

a
A system restore point must be created when a new device driver is installed.
CM-6 - Low - CCI-000366 - V-15701 - SV-53099r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-CC-000021
Vuln IDs
  • V-15701
Rule IDs
  • SV-53099r1_rule
A system restore point allows a rollback if an issue is encountered when a new device driver is installed.ECSC-1
Checks: C-47405r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\DeviceInstall\Settings\ Value Name: DisableSystemRestore Type: REG_DWORD Value: 0

Fix: F-46025r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Device Installation -> "Prevent creation of a system restore point during device activity that would normally prompt creation of a restore point" to "Disabled".

a
An Error Report must not be sent when a generic device driver is installed.
CM-7 - Low - CCI-000381 - V-15702 - SV-53105r1_rule
RMF Control
CM-7
Severity
L
CCI
CCI-000381
Version
WN12-CC-000020
Vuln IDs
  • V-15702
Rule IDs
  • SV-53105r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting prevents an error report from being sent when a generic device driver is installed.ECSC-1
Checks: C-47410r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\DeviceInstall\Settings\ Value Name: DisableSendGenericDriverNotFoundToWER Type: REG_DWORD Value: 1

Fix: F-46030r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Device Installation -> "Do not send a Windows error report when a generic driver is installed on a device" to "Enabled".

a
Users must not be prompted to search Windows Update for device drivers.
CM-11 - Low - CCI-001812 - V-15703 - SV-53115r1_rule
RMF Control
CM-11
Severity
L
CCI
CCI-001812
Version
WN12-CC-000026
Vuln IDs
  • V-15703
Rule IDs
  • SV-53115r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting prevents users from being prompted to search Windows Update for device drivers.ECSC-1
Checks: C-47421r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\DriverSearching\ Value Name: DontPromptForWindowsUpdate Type: REG_DWORD Value: 1

Fix: F-46041r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Driver Installation -> "Turn off Windows Update device driver search prompt" to "Enabled".

a
Errors in handwriting recognition on tablet PCs must not be reported to Microsoft.
CM-7 - Low - CCI-000381 - V-15704 - SV-53116r1_rule
RMF Control
CM-7
Severity
L
CCI
CCI-000381
Version
WN12-CC-000035
Vuln IDs
  • V-15704
Rule IDs
  • SV-53116r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting prevents errors in handwriting recognition on tablet PCs from being reported to Microsoft.ECSC-1
Checks: C-47422r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\HandwritingErrorReports\ Value Name: PreventHandwritingErrorReports Type: REG_DWORD Value: 1

Fix: F-46042r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication settings -> "Turn off handwriting recognition error reporting" to "Enabled".

b
Users must be prompted to authenticate on resume from sleep (on battery).
IA-11 - Medium - CCI-002038 - V-15705 - SV-53131r1_rule
RMF Control
IA-11
Severity
M
CCI
CCI-002038
Version
WN12-CC-000054
Vuln IDs
  • V-15705
Rule IDs
  • SV-53131r1_rule
Authentication must always be required when accessing a system. This setting ensures the user is prompted for a password on resume from sleep (on battery).ECSC-1
Checks: C-47437r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Power\PowerSettings\0e796bdb-100d-47d6-a2d5-f7d2daa51f51\ Value Name: DCSettingIndex Type: REG_DWORD Value: 1

Fix: F-46057r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Power Management -> Sleep Settings -> "Require a password when a computer wakes (on battery)" to "Enabled".

b
The user must be prompted to authenticate on resume from sleep (plugged in).
IA-11 - Medium - CCI-002038 - V-15706 - SV-53132r1_rule
RMF Control
IA-11
Severity
M
CCI
CCI-002038
Version
WN12-CC-000055
Vuln IDs
  • V-15706
Rule IDs
  • SV-53132r1_rule
Authentication must always be required when accessing a system. This setting ensures the user is prompted for a password on resume from sleep (plugged in).ECSC-1
Checks: C-47438r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Power\PowerSettings\0e796bdb-100d-47d6-a2d5-f7d2daa51f51\ Value Name: ACSettingIndex Type: REG_DWORD Value: 1

Fix: F-46058r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Power Management -> Sleep Settings -> "Require a password when a computer wakes (plugged in)" to "Enabled".

a
Remote Assistance log files must be generated.
CM-6 - Low - CCI-000366 - V-15707 - SV-53133r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-CC-000062
Vuln IDs
  • V-15707
Rule IDs
  • SV-53133r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. This setting will turn on session logging for Remote Assistance connections.ECSC-1
Checks: C-47439r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: LoggingEnabled Type: REG_DWORD Value: 1

Fix: F-46059r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Remote Assistance -> "Turn on session logging" to "Enabled".

b
Microsoft Active Protection Service membership must be disabled.
CM-7 - Medium - CCI-000381 - V-15713 - SV-53134r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000111
Vuln IDs
  • V-15713
Rule IDs
  • SV-53134r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting disables Microsoft Active Protection Service membership and reporting.ECSC-1
Checks: C-47440r1_chk

If the following registry value exists and is set to "1" (Basic) or "2" (Advanced), this is a finding: If the registry value does not exist, this is not a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows Defender\Spynet\ Value Name: SpyNetReporting Type: REG_DWORD Value: 1 or 2 = a Finding

Fix: F-46060r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Defender -> "Configure Microsoft Active Protection Service Reporting " to "Disabled".

a
Error Reporting events must be logged in the system event log.
SI-11 - Low - CCI-001312 - V-15714 - SV-53135r1_rule
RMF Control
SI-11
Severity
L
CCI
CCI-001312
Version
WN12-CC-000112
Vuln IDs
  • V-15714
Rule IDs
  • SV-53135r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. This setting ensures that Error Reporting events will be logged in the system event log.ECSC-1
Checks: C-47441r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\Windows Error Reporting\ Value Name: LoggingDisabled Type: REG_DWORD Value: 0

Fix: F-46061r2_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Error Reporting -> "Disable logging" to "Disabled".

a
Additional data requests in response to Error Reporting must be declined.
CM-7 - Low - CCI-000381 - V-15717 - SV-53136r1_rule
RMF Control
CM-7
Severity
L
CCI
CCI-000381
Version
WN12-CC-000114
Vuln IDs
  • V-15717
Rule IDs
  • SV-53136r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting prevents additional data requests in response to Error Reporting.ECSC-1
Checks: C-47442r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\Windows Error Reporting\ Value Name: DontSendAdditionalData Type: REG_DWORD Value: 1

Fix: F-46062r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Error Reporting -> "Do not send additional data" to "Enabled".

a
Turning off File Explorer heap termination on corruption must be disabled.
SC-5 - Low - CCI-002385 - V-15718 - SV-53137r1_rule
RMF Control
SC-5
Severity
L
CCI
CCI-002385
Version
WN12-CC-000090
Vuln IDs
  • V-15718
Rule IDs
  • SV-53137r1_rule
Legacy plug-in applications may continue to function when a File Explorer session has become corrupt. Disabling this feature will prevent this.ECSC-1
Checks: C-47443r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\Explorer\ Value Name: NoHeapTerminationOnCorruption Type: REG_DWORD Value: 0

Fix: F-46063r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> File Explorer -> "Turn off heap termination on corruption" to "Disabled".

a
Users must be notified if the logon server was inaccessible and cached credentials were used.
CM-6 - Low - CCI-000366 - V-15719 - SV-53138r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-CC-000119
Vuln IDs
  • V-15719
Rule IDs
  • SV-53138r1_rule
Notifying a user whether cached credentials were used may make them aware of connection issues. ECSC-1
Checks: C-47444r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: ReportControllerMissing Type: REG_DWORD Value: 1

Fix: F-46064r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Logon Options -> "Report when logon server was not available during user logon" to "Enabled".

b
Windows Media Digital Rights Management (DRM) must be prevented from accessing the Internet.
CM-7 - Medium - CCI-000381 - V-15722 - SV-53139r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000120
Vuln IDs
  • V-15722
Rule IDs
  • SV-53139r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This check verifies that Windows Media DRM will be prevented from accessing the Internet.ECSC-1
Checks: C-47445r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\WMDRM\ Value Name: DisableOnline Type: REG_DWORD Value: 1

Fix: F-46065r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Media Digital Rights Management -> "Prevent Windows Media DRM Internet Access" to "Enabled".

b
Users must be prevented from sharing files in their profiles.
SC-4 - Medium - CCI-001090 - V-15727 - SV-53140r1_rule
RMF Control
SC-4
Severity
M
CCI
CCI-001090
Version
WN12-UC-000012
Vuln IDs
  • V-15727
Rule IDs
  • SV-53140r1_rule
Allowing users to share files in their profiles may provide unauthorized access or result in the exposure of sensitive data.ECSC-1
Checks: C-47446r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_CURRENT_USER Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\ Value Name: NoInPlaceSharing Type: REG_DWORD Value: 1

Fix: F-46066r1_fix

Configure the policy value for User Configuration -> Administrative Templates -> Windows Components -> Network Sharing -> "Prevent users from sharing files within their profile" to "Enabled".

b
Software certificate installation files must be removed from a system.
CM-6 - Medium - CCI-000366 - V-15823 - SV-53141r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-GE-000020
Vuln IDs
  • V-15823
Rule IDs
  • SV-53141r1_rule
Use of software certificates and their accompanying installation files for end users to access resources is less secure than the use of hardware-based certificates. ECSC-1
Checks: C-47447r1_chk

Search all drives for *.p12 and *.pfx files. If any files with these extensions exist, this is a finding. This does not apply to server-based applications that have a requirement for .p12 certificate files (e.g., Oracle Wallet Manager). Some applications create files with extensions of .p12 that are NOT certificate installation files. Removal of noncertificate installation files from systems is not required. These must be documented with the IAO.

Fix: F-46067r1_fix

Remove any certificate installation files (*.p12 and *.pfx) found on a system. This does not apply to server-based applications that have a requirement for .p12 certificate files (e.g., Oracle Wallet Manager).

b
UIAccess applications must not be allowed to prompt for elevation without using the secure desktop.
SC-3 - Medium - CCI-001084 - V-15991 - SV-52223r2_rule
RMF Control
SC-3
Severity
M
CCI
CCI-001084
Version
WN12-SO-000086
Vuln IDs
  • V-15991
Rule IDs
  • SV-52223r2_rule
User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting prevents User Interface Accessibility programs from disabling the secure desktop for elevation prompts.ECCD-1, ECCD-2
Checks: C-46966r1_chk

UAC requirements are NA on Server Core installations. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: EnableUIADesktopToggle Value Type: REG_DWORD Value: 0

Fix: F-45241r1_fix

UAC requirements are NA on Server Core installations. Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "User Account Control: Allow UIAccess applications to prompt for elevation without using the secure desktop" to "Disabled".

b
Users must be prevented from mapping local COM ports and redirecting data from the Remote Desktop Session Host to local COM ports. (Remote Desktop Services Role).
AC-17 - Medium - CCI-002314 - V-15997 - SV-52224r2_rule
RMF Control
AC-17
Severity
M
CCI
CCI-002314
Version
WN12-CC-000132
Vuln IDs
  • V-15997
Rule IDs
  • SV-52224r2_rule
Preventing the redirection of Remote Desktop session data to a client computer's COM ports helps reduce possible exposure of sensitive data.ECSC-1
Checks: C-46967r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: fDisableCcm Type: REG_DWORD Value: 1

Fix: F-45242r2_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Device and Resource Redirection -> "Do not allow COM port redirection" to "Enabled".

b
Users must be prevented from mapping local LPT ports and redirecting data from the Remote Desktop Session Host to local LPT ports. (Remote Desktop Services Role).
AC-17 - Medium - CCI-002314 - V-15998 - SV-52226r2_rule
RMF Control
AC-17
Severity
M
CCI
CCI-002314
Version
WN12-CC-000133
Vuln IDs
  • V-15998
Rule IDs
  • SV-52226r2_rule
Preventing the redirection of Remote Desktop session data to a client computer's LPT ports helps reduce possible exposure of sensitive data.ECSC-1
Checks: C-46968r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: fDisableLPT Type: REG_DWORD Value: 1

Fix: F-45244r2_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Device and Resource Redirection -> "Do not allow LPT port redirection" to "Enabled".

b
Users must be prevented from redirecting Plug and Play devices to the Remote Desktop Session Host. (Remote Desktop Services Role).
AC-17 - Medium - CCI-002314 - V-15999 - SV-52229r2_rule
RMF Control
AC-17
Severity
M
CCI
CCI-002314
Version
WN12-CC-000135
Vuln IDs
  • V-15999
Rule IDs
  • SV-52229r2_rule
Preventing the redirection of Plug and Play devices in Remote Desktop sessions helps reduce possible exposure of sensitive data.ECSC-1
Checks: C-46969r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: fDisablePNPRedir Type: REG_DWORD Value: 1

Fix: F-45246r2_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Device and Resource Redirection -> "Do not allow supported Plug and Play device redirection" to "Enabled".

b
The system must be configured to ensure smart card devices can be redirected to the Remote Desktop session. (Remote Desktop Services Role).
AC-17 - Medium - CCI-002314 - V-16000 - SV-52230r2_rule
RMF Control
AC-17
Severity
M
CCI
CCI-002314
Version
WN12-CC-000134
Vuln IDs
  • V-16000
Rule IDs
  • SV-52230r2_rule
Enabling the redirection of smart card devices allows their use within Remote Desktop sessions.ECSC-1
Checks: C-46970r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: fEnableSmartCard Type: REG_DWORD Value: 1

Fix: F-45247r2_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Device and Resource Redirection -> "Do not allow smart card device redirection" to "Disabled".

a
The system must be configured to remove the Disconnect option from the Shut Down dialog box on the Remote Desktop Client. (Remote Desktop Services Role).
AC-17 - Low - CCI-002314 - V-16005 - SV-52232r2_rule
RMF Control
AC-17
Severity
L
CCI
CCI-002314
Version
WN12-CC-000137
Vuln IDs
  • V-16005
Rule IDs
  • SV-52232r2_rule
Removing the Disconnect option from the Shut Down dialog box for Remote Desktop sessions helps prevent disconnected but active sessions from continuing to run and using resources.ECSC-1
Checks: C-46971r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\ Value Name: NoDisconnect Type: REG_DWORD Value: 1

Fix: F-45248r2_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Remote Session Environment -> "Remove "Disconnect" option from Shut Down dialog" to "Enabled".

b
Windows must elevate all applications in User Account Control, not just signed ones.
SC-3 - Medium - CCI-001084 - V-16008 - SV-53142r1_rule
RMF Control
SC-3
Severity
M
CCI
CCI-001084
Version
WN12-SO-000081
Vuln IDs
  • V-16008
Rule IDs
  • SV-53142r1_rule
User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting configures whether Windows elevates all applications, or only signed ones.ECCD-2, ECCD-1
Checks: C-47448r1_chk

UAC requirements are NA on Server Core installations. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: ValidateAdminCodeSignatures Value Type: REG_DWORD Value: 0

Fix: F-46068r2_fix

UAC requirements are NA on Server Core installations. Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "User Account Control: Only elevate executables that are signed and validated" to "Disabled".

b
The Windows Customer Experience Improvement Program must be disabled.
CM-7 - Medium - CCI-000381 - V-16020 - SV-53143r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000045
Vuln IDs
  • V-16020
Rule IDs
  • SV-53143r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting ensures the Windows Customer Experience Improvement Program is disabled so information is not passed to the vendor.ECSC-1
Checks: C-47449r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\SQMClient\Windows\ Value Name: CEIPEnable Type: REG_DWORD Value: 0

Fix: F-46069r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication Settings -> "Turn off Windows Customer Experience Improvement Program" to "Enabled".

b
The Windows Help Experience Improvement Program must be disabled.
CM-7 - Medium - CCI-000381 - V-16021 - SV-53144r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-UC-000007
Vuln IDs
  • V-16021
Rule IDs
  • SV-53144r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting ensures the Windows Help Experience Improvement Program is disabled to prevent information from being passed to the vendor.ECSC-1
Checks: C-47450r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_CURRENT_USER Registry Path: \Software\Policies\Microsoft\Assistance\Client\1.0\ Value Name: NoImplicitFeedback Type: REG_DWORD Value: 1

Fix: F-46070r1_fix

Configure the policy value for User Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication Settings -> "Turn off Help Experience Improvement Program" to "Enabled".

b
Windows Help Ratings feedback must be turned off.
CM-7 - Medium - CCI-000381 - V-16048 - SV-53145r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-UC-000008
Vuln IDs
  • V-16048
Rule IDs
  • SV-53145r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting ensures users cannot provide ratings feedback to Microsoft for Help content.ECSC-1
Checks: C-47451r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_CURRENT_USER Registry Path: \Software\Policies\Microsoft\Assistance\Client\1.0\ Value Name: NoExplicitFeedback Type: REG_DWORD Value: 1

Fix: F-46071r1_fix

Configure the policy value for User Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication Settings -> "Turn off Help Ratings" to "Enabled".

c
Unauthorized accounts must not have the Debug programs user right.
AC-6 - High - CCI-002235 - V-18010 - SV-52115r1_rule
RMF Control
AC-6
Severity
H
CCI
CCI-002235
Version
WN12-UR-000016
Vuln IDs
  • V-18010
Rule IDs
  • SV-52115r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Debug programs" user right can attach a debugger to any process or to the kernel, providing complete access to sensitive and critical operating system components. This right is given to Administrators in the default configuration.If an application requires this user right, this can be downgraded to a CAT III if the following conditions are met: Vendor documentation must support the requirement for having the user right. The requirement must be documented with the IAO. The application account must meet requirements for application account passwords, such as length (V-36661) and required changes frequency (V-36662).ECLP-1
Checks: C-46932r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Debug programs" user right, this is a finding: Administrators

Fix: F-45140r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Debug programs" to only include the following accounts or groups: Administrators

b
The service principal name (SPN) target name validation level must be turned off.
CM-6 - Medium - CCI-000366 - V-21950 - SV-53175r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-SO-000035
Vuln IDs
  • V-21950
Rule IDs
  • SV-53175r1_rule
If a service principle name (SPN) is provided by the client, it is validated against the server's list of SPNs. Implementation may disrupt file and print sharing capabilities.ECSC-1
Checks: C-47481r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\LanmanServer\Parameters\ Value Name: SmbServerNameHardeningLevel Type: REG_DWORD Value: 0

Fix: F-46101r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Microsoft network server: Server SPN target name validation level" to "Off".

b
Services using Local System that use Negotiate when reverting to NTLM authentication must use the computer identity vs. authenticating anonymously.
IA-3 - Medium - CCI-000778 - V-21951 - SV-53176r1_rule
RMF Control
IA-3
Severity
M
CCI
CCI-000778
Version
WN12-SO-000061
Vuln IDs
  • V-21951
Rule IDs
  • SV-53176r1_rule
Services using Local System that use Negotiate when reverting to NTLM authentication may gain unauthorized access if allowed to authenticate anonymously vs. using the computer identity.ECSC-1
Checks: C-47482r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\LSA\ Value Name: UseMachineId Type: REG_DWORD Value: 1

Fix: F-46102r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network security: Allow Local System to use computer identity for NTLM" to "Enabled".

b
NTLM must be prevented from falling back to a Null session.
CM-6 - Medium - CCI-000366 - V-21952 - SV-53177r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-SO-000062
Vuln IDs
  • V-21952
Rule IDs
  • SV-53177r1_rule
NTLM sessions that are allowed to fall back to Null (unauthenticated) sessions may gain unauthorized access.ECSC-1
Checks: C-47483r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\LSA\MSV1_0\ Value Name: allownullsessionfallback Type: REG_DWORD Value: 0

Fix: F-46103r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network security: Allow LocalSystem NULL session fallback" to "Disabled".

b
PKU2U authentication using online identities must be prevented.
CM-6 - Medium - CCI-000366 - V-21953 - SV-53178r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-SO-000063
Vuln IDs
  • V-21953
Rule IDs
  • SV-53178r1_rule
PKU2U is a peer-to-peer authentication protocol. This setting prevents online identities from authenticating to domain-joined systems. Authentication will be centrally managed with Windows user accounts.ECSC-1
Checks: C-47484r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\LSA\pku2u\ Value Name: AllowOnlineID Type: REG_DWORD Value: 0

Fix: F-46104r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network security: Allow PKU2U authentication requests to this computer to use online identities" to "Disabled".

b
Kerberos encryption types must be configured to prevent the use of DES encryption suites.
IA-7 - Medium - CCI-000803 - V-21954 - SV-53179r1_rule
RMF Control
IA-7
Severity
M
CCI
CCI-000803
Version
WN12-SO-000064
Vuln IDs
  • V-21954
Rule IDs
  • SV-53179r1_rule
Certain encryption types are no longer considered secure. This setting configures a minimum encryption type for Kerberos, preventing the use of the DES encryption suites.ECSC-1
Checks: C-47485r2_chk

Verify that DES encryption types are not allowed for Kerberos. If the following registry value does not exist, this is not a finding: If the registry value does exist and is configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Sofware\Microsoft\Windows\CurrentVersion\Policies\System\Kerberos\Parameters\ Value Name: SupportedEncryptionTypes Type: REG_DWORD Value: 1, 2, or 3 are a finding.

Fix: F-46105r1_fix

The default configuration supports this requirement. If Kerberos encryption types must be configured, ensure that the following are not selected: DES_CBC_CRC DES_CBC_MD5 If the policy for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network security: Configure encryption types allowed for Kerberos" is configured, only the following selections are allowed: RC4_HMAC_MD5 AES128_HMAC_SHA1 AES256_HMAC_SHA1 Future encryption types

a
IPv6 source routing must be configured to the highest protection level.
CM-6 - Low - CCI-000366 - V-21955 - SV-53180r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-SO-000037
Vuln IDs
  • V-21955
Rule IDs
  • SV-53180r1_rule
Configuring the system to disable IPv6 source routing protects against spoofing.ECSC-1
Checks: C-47486r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\Tcpip6\Parameters\ Value Name: DisableIpSourceRouting Type: REG_DWORD Value: 2

Fix: F-46106r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "MSS: (DisableIPSourceRouting IPv6) IP source routing protection level (protects against packet spoofing)" to "Highest protection, source routing is completely disabled". (See "Updating the Windows Security Options File" in the STIG Overview document if MSS settings are not visible in the system's policy tools.)

a
IPv6 TCP data retransmissions must be configured to prevent resources from becoming exhausted.
SC-5 - Low - CCI-002385 - V-21956 - SV-53181r1_rule
RMF Control
SC-5
Severity
L
CCI
CCI-002385
Version
WN12-SO-000047
Vuln IDs
  • V-21956
Rule IDs
  • SV-53181r1_rule
Configuring Windows to limit the number of times that IPv6 TCP retransmits unacknowledged data segments before aborting the attempt helps prevent resources from becoming exhausted.ECSC-1
Checks: C-47487r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\Tcpip6\Parameters\ Value Name: TcpMaxDataRetransmissions Type: REG_DWORD Value: 3 (or less)

Fix: F-46107r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "MSS: (TcpMaxDataRetransmissions IPv6) How many times unacknowledged data is retransmitted (3 recommended, 5 is the default)" to "3" or less. (See "Updating the Windows Security Options File" in the STIG Overview document if MSS settings are not visible in the system's policy tools.)

a
Domain users must be required to elevate when setting a networks location.
SC-3 - Low - CCI-001084 - V-21960 - SV-53182r1_rule
RMF Control
SC-3
Severity
L
CCI
CCI-001084
Version
WN12-CC-000005
Vuln IDs
  • V-21960
Rule IDs
  • SV-53182r1_rule
Selecting an incorrect network location may allow greater exposure of a system. Elevation is required by default on nondomain systems to change network location. This setting configures elevation to also be required on domain-joined systems.ECSC-1
Checks: C-47488r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\Network Connections\ Value Name: NC_StdDomainUserSetLocation Type: REG_DWORD Value: 1

Fix: F-46108r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Network -> Network Connections -> "Require domain users to elevate when setting a network's location" to "Enabled".

a
All Direct Access traffic must be routed through the internal network.
CM-6 - Low - CCI-000366 - V-21961 - SV-53183r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-CC-000006
Vuln IDs
  • V-21961
Rule IDs
  • SV-53183r1_rule
Routing all Direct Access traffic through the internal network allows monitoring and prevents split tunneling.ECSC-1
Checks: C-47489r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\TCPIP\v6Transition\ Value Name: Force_Tunneling Type: REG_SZ Value: Enabled

Fix: F-46109r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Network -> Network Connections -> "Route all traffic through the internal network" to "Enabled: Enabled State".

a
Windows Update must be prevented from searching for point and print drivers.
CM-11 - Low - CCI-001812 - V-21963 - SV-53184r1_rule
RMF Control
CM-11
Severity
L
CCI
CCI-001812
Version
WN12-CC-000016
Vuln IDs
  • V-21963
Rule IDs
  • SV-53184r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting will prevent Windows from searching Windows Update for point and print drivers. Only the local driver store and server driver cache will be searched.ECSC-1
Checks: C-47490r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Printers\ Value Name: DoNotInstallCompatibleDriverFromWindowsUpdate Type: REG_DWORD Value: 1

Fix: F-46110r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Printers -> "Extend Point and Print connection to search Windows Update" to "Disabled".

a
Device metadata retrieval from the Internet must be prevented.
CM-7 - Low - CCI-000381 - V-21964 - SV-53185r1_rule
RMF Control
CM-7
Severity
L
CCI
CCI-000381
Version
WN12-CC-000022
Vuln IDs
  • V-21964
Rule IDs
  • SV-53185r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting will prevent Windows from retrieving device metadata from the Internet.ECSC-1
Checks: C-47491r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\Device Metadata\ Value Name: PreventDeviceMetadataFromNetwork Type: REG_DWORD Value: 1

Fix: F-46111r2_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Device Installation -> "Prevent device metadata retrieval from Internet" to "Enabled".

a
Device driver searches using Windows Update must be prevented.
CM-11 - Low - CCI-001812 - V-21965 - SV-53186r1_rule
RMF Control
CM-11
Severity
L
CCI
CCI-001812
Version
WN12-CC-000024
Vuln IDs
  • V-21965
Rule IDs
  • SV-53186r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting will prevent the system from searching Windows Update for device drivers.ECSC-1
Checks: C-47492r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\DriverSearching\ Value Name: SearchOrderConfig Type: REG_DWORD Value: 0

Fix: F-46112r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Device Installation -> "Specify search order for device driver source locations" to "Enabled: Do not search Windows Update".

a
Microsoft Support Diagnostic Tool (MSDT) interactive communication with Microsoft must be prevented.
CM-7 - Low - CCI-000381 - V-21967 - SV-53187r1_rule
RMF Control
CM-7
Severity
L
CCI
CCI-000381
Version
WN12-CC-000066
Vuln IDs
  • V-21967
Rule IDs
  • SV-53187r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting prevents the MSDT from communicating with and sending collected data to Microsoft, the default support provider.ECSC-1
Checks: C-47493r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\ScriptedDiagnosticsProvider\Policy\ Value Name: DisableQueryRemoteServer Type: REG_DWORD Value: 0

Fix: F-46113r2_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Troubleshooting and Diagnostics -> Microsoft Support Diagnostic Tool -> "Microsoft Support Diagnostic Tool: Turn on MSDT interactive communication with support provider" to "Disabled".

a
Access to Windows Online Troubleshooting Service (WOTS) must be prevented.
CM-7 - Low - CCI-000381 - V-21969 - SV-53188r1_rule
RMF Control
CM-7
Severity
L
CCI
CCI-000381
Version
WN12-CC-000067
Vuln IDs
  • V-21969
Rule IDs
  • SV-53188r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting prevents users from searching troubleshooting content on Microsoft servers. Only local content will be available.ECSC-1
Checks: C-47494r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\ScriptedDiagnosticsProvider\Policy\ Value Name: EnableQueryRemoteServer Type: REG_DWORD Value: 0

Fix: F-46114r2_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Troubleshooting and Diagnostics -> Scripted Diagnostics -> "Troubleshooting: Allow users to access online troubleshooting content on Microsoft servers from the Troubleshooting Control Panel (via the Windows Online Troubleshooting Service - WOTS)" to "Disabled".

a
Responsiveness events must be prevented from being aggregated and sent to Microsoft.
CM-7 - Low - CCI-000381 - V-21970 - SV-53128r1_rule
RMF Control
CM-7
Severity
L
CCI
CCI-000381
Version
WN12-CC-000068
Vuln IDs
  • V-21970
Rule IDs
  • SV-53128r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting prevents responsiveness events from being aggregated and sent to Microsoft.ECSC-1
Checks: C-47434r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\WDI\{9c5a40da-b965-4fc3-8781-88dd50a6299d}\ Value Name: ScenarioExecutionEnabled Type: REG_DWORD Value: 0

Fix: F-46054r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Troubleshooting and Diagnostics -> Windows Performance PerfTrack -> "Enable/Disable PerfTrack" to "Disabled".

a
The Application Compatibility Program Inventory must be prevented from collecting data and sending the information to Microsoft.
CM-7 - Low - CCI-000381 - V-21971 - SV-53127r1_rule
RMF Control
CM-7
Severity
L
CCI
CCI-000381
Version
WN12-CC-000071
Vuln IDs
  • V-21971
Rule IDs
  • SV-53127r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting will prevent the Program Inventory from collecting data about a system and sending the information to Microsoft.ECSC-1
Checks: C-47433r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\AppCompat\ Value Name: DisableInventory Type: REG_DWORD Value: 1

Fix: F-46053r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Application Compatibility -> "Turn off Inventory Collector" to "Enabled".

c
Autoplay must be turned off for non-volume devices.
CM-7 - High - CCI-001764 - V-21973 - SV-53126r1_rule
RMF Control
CM-7
Severity
H
CCI
CCI-001764
Version
WN12-CC-000072
Vuln IDs
  • V-21973
Rule IDs
  • SV-53126r1_rule
Allowing autoplay to execute may introduce malicious code to a system. Autoplay begins reading from a drive as soon as media is inserted into the drive. As a result, the setup file of programs or music on audio media may start. This setting will disable autoplay for non-volume devices (such as Media Transfer Protocol (MTP) devices).ECSC-1
Checks: C-47432r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\Explorer\ Value Name: NoAutoplayfornonVolume Type: REG_DWORD Value: 1

Fix: F-46052r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> AutoPlay Policies -> "Disallow Autoplay for non-volume devices" to "Enabled".

b
Explorer Data Execution Prevention must be enabled.
SI-16 - Medium - CCI-002824 - V-21980 - SV-53125r1_rule
RMF Control
SI-16
Severity
M
CCI
CCI-002824
Version
WN12-CC-000089
Vuln IDs
  • V-21980
Rule IDs
  • SV-53125r1_rule
Data Execution Prevention (DEP) provides additional protection by performing checks on memory to help prevent malicious code from running. This setting will prevent Data Execution Prevention from being turned off for File Explorer.ECSC-1
Checks: C-47431r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\Explorer\ Value Name: NoDataExecutionPrevention Type: REG_DWORD Value: 0

Fix: F-46051r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> File Explorer -> "Turn off Data Execution Prevention for Explorer" to "Disabled".

c
The default autorun behavior must be configured to prevent autorun commands.
CM-7 - High - CCI-001764 - V-22692 - SV-53124r1_rule
RMF Control
CM-7
Severity
H
CCI
CCI-001764
Version
WN12-CC-000073
Vuln IDs
  • V-22692
Rule IDs
  • SV-53124r1_rule
Allowing autorun commands to execute may introduce malicious code to a system. Configuring this setting prevents autorun commands from executing.ECSC-1
Checks: C-47430r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer\ Value Name: NoAutorun Type: REG_DWORD Value: 1

Fix: F-46050r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> AutoPlay Policies -> "Set the default behavior for AutoRun" to "Enabled:Do not execute any autorun commands".

c
Standard user accounts must only have Read permissions to the Winlogon registry key.
AC-6 - High - CCI-002235 - V-26070 - SV-53123r1_rule
RMF Control
AC-6
Severity
H
CCI
CCI-002235
Version
WN12-RG-000001
Vuln IDs
  • V-26070
Rule IDs
  • SV-53123r1_rule
Permissions on the Winlogon registry key must only allow privileged accounts to change registry values. If standard users have this capability, there is a potential for programs to run with elevated privileges when a privileged user logs on to the system.ECCD-1, ECCD-2
Checks: C-47429r1_chk

Navigate to the following registry key and review the assigned permissions: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon Standard user accounts and groups must only have Read permissions to this registry key. If any standard user accounts or groups have greater permissions, this is a finding. The default permissions satisfy this requirement.

Fix: F-46049r1_fix

Ensure only Read permissions are assigned to standard user accounts and groups for the following registry key. The default configuration satisfies this requirement. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

c
Anonymous enumeration of SAM accounts must not be allowed.
CM-6 - High - CCI-000366 - V-26283 - SV-53122r1_rule
RMF Control
CM-6
Severity
H
CCI
CCI-000366
Version
WN12-SO-000051
Vuln IDs
  • V-26283
Rule IDs
  • SV-53122r1_rule
Anonymous enumeration of SAM accounts allows anonymous log on users (null session connections) to list all accounts names, thus providing a list of potential points to attack the system.ECSC-1
Checks: C-47428r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Control\Lsa\ Value Name: RestrictAnonymousSAM Value Type: REG_DWORD Value: 1

Fix: F-46048r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Network access: Do not allow anonymous enumeration of SAM accounts" to "Enabled".

a
The Windows dialog box title for the legal banner must be configured.
AC-8 - Low - CCI-000048 - V-26359 - SV-53121r1_rule
RMF Control
AC-8
Severity
L
CCI
CCI-000048
Version
WN12-SO-000023
Vuln IDs
  • V-26359
Rule IDs
  • SV-53121r1_rule
Failure to display the logon banner prior to a logon attempt will negate legal proceedings resulting from unauthorized access to system resources.ECWM-1
Checks: C-47427r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: LegalNoticeCaption Value Type: REG_SZ Value: See message title options below "DoD Notice and Consent Banner", "US Department of Defense Warning Statement", or a site-defined equivalent. If a site-defined title is used, it can in no case contravene or modify the language of the banner text required in V-1089. Automated tools may only search for the titles defined above. If a site-defined title is used, a manual review will be required.

Fix: F-46047r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Interactive Logon: Message title for users attempting to log on" to "DoD Notice and Consent Banner", "US Department of Defense Warning Statement", or a site-defined equivalent. If a site-defined title is used, it can in no case contravene or modify the language of the banner text required in V-1089.

b
Unauthorized accounts must not have the Access Credential Manager as a trusted caller user right.
AC-6 - Medium - CCI-002235 - V-26469 - SV-53120r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000001
Vuln IDs
  • V-26469
Rule IDs
  • SV-53120r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Access Credential Manager as a trusted caller" user right may be able to retrieve the credentials of other accounts from Credential Manager.ECLP-1
Checks: C-47426r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups are granted the "Access Credential Manager as a trusted caller" user right, this is a finding.

Fix: F-46046r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Access Credential Manager as a trusted caller" to be defined but containing no entries (blank).

b
Unauthorized accounts must not have the Access this computer from the network user right on member servers.
AC-3 - Medium - CCI-000213 - V-26470 - SV-51499r2_rule
RMF Control
AC-3
Severity
M
CCI
CCI-000213
Version
WN12-UR-000002-MS
Vuln IDs
  • V-26470
Rule IDs
  • SV-51499r2_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Access this computer from the network" user right may access resources on the system, and must be limited to those that require it.If an application requires this user right, this can be downgraded to not a finding if the following conditions are met: Vendor documentation must support the requirement for having the user right. The requirement must be documented with the IAO. The application account must meet requirements for application account passwords, such as length (V-36661) and required changes frequency (V-36662).ECLP-1
Checks: C-49426r2_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Access this computer from the network" user right, this is a finding: Administrators Authenticated Users Systems dedicated to managing Active Directory (AD admin platforms, see V-36436 in the Active Directory Domain STIG), must only allow Administrators, removing the Authenticated Users group.

Fix: F-49518r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Access this computer from the network" to only include the following accounts or groups: Administrators Authenticated Users Systems dedicated to managing Active Directory (AD admin platforms, see V-36436 in the Active Directory Domain STIG), must only allow Administrators, removing the Authenticated Users group.

b
Unauthorized accounts must not have the Adjust memory quotas for a process user right.
AC-6 - Medium - CCI-002235 - V-26471 - SV-52109r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000004
Vuln IDs
  • V-26471
Rule IDs
  • SV-52109r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Adjust memory quotas for a process" user right can adjust memory that is available to processes, and could be used in a denial of service (DoS) attack.If an application requires this user right, this can be downgraded to not a finding if the following conditions are met: Vendor documentation must support the requirement for having the user right. The requirement must be documented with the IAO. The application account must meet requirements for application account passwords, such as length (V-36661) and required changes frequency (V-36662).ECLP-1
Checks: C-46926r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Adjust memory quotas for a process" user right, this is a finding: Administrators Local Service Network Service

Fix: F-45134r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Adjust memory quotas for a process" to only include the following accounts or groups: Administrators Local Service Network Service

b
Unauthorized accounts must not have the Allow log on locally user right.
AC-3 - Medium - CCI-000213 - V-26472 - SV-52110r1_rule
RMF Control
AC-3
Severity
M
CCI
CCI-000213
Version
WN12-UR-000005
Vuln IDs
  • V-26472
Rule IDs
  • SV-52110r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Allow log on locally" user right can log on interactively to a system. If an application requires this user right, this can be downgraded to not a finding if the following conditions are met: Vendor documentation must support the requirement for having the user right. The requirement must be documented with the IAO. The application account must meet requirements for application account passwords, such as length (V-36661) and required changes frequency (V-36662).ECLP-1
Checks: C-46927r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Allow log on locally" user right, this is a finding: Administrators

Fix: F-45135r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Allow log on locally" to only include the following accounts or groups: Administrators

b
Unauthorized accounts must not have the Allow log on through Remote Desktop Services user right.
AC-3 - Medium - CCI-000213 - V-26473 - SV-53119r1_rule
RMF Control
AC-3
Severity
M
CCI
CCI-000213
Version
WN12-UR-000006
Vuln IDs
  • V-26473
Rule IDs
  • SV-53119r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Allow log on through Remote Desktop Services" user right can access a system through Remote Desktop.ECLP-1
Checks: C-47425r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Allow log on through Remote Desktop Services" user right, this is a finding: Administrators If the system serves the Remote Desktop Services role, the Remote Desktop Users group may be included.

Fix: F-46045r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Allow log on through Remote Desktop Services" to only include the following accounts or groups: Administrators

b
Unauthorized accounts must not have the Back up files and directories user right.
AC-6 - Medium - CCI-002235 - V-26474 - SV-52111r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000007
Vuln IDs
  • V-26474
Rule IDs
  • SV-52111r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Back up files and directories" user right can circumvent file and directory permissions and could allow access to sensitive data.If an application requires this user right, this can be downgraded to not a finding if the following conditions are met: Vendor documentation must support the requirement for having the user right. The requirement must be documented with the IAO. The application account must meet requirements for application account passwords, such as length (V-36661) and required changes frequency (V-36662).ECLP-1
Checks: C-46928r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Back up files and directories" user right, this is a finding: Administrators

Fix: F-45136r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Back up files and directories" to only include the following accounts or groups: Administrators

a
Unauthorized accounts must not have the Bypass traverse checking user right.
AC-6 - Low - CCI-002235 - V-26475 - SV-52112r1_rule
RMF Control
AC-6
Severity
L
CCI
CCI-002235
Version
WN12-UR-000008
Vuln IDs
  • V-26475
Rule IDs
  • SV-52112r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Bypass traverse checking" user right can pass through folders when browsing even if they do not have the "Traverse Folder" access permission. They could potentially view sensitive file and folder names. They would not have additional access to the files and folders unless it is granted through permissions.If an application requires this user right, this can be downgraded to not a finding if the following conditions are met: Vendor documentation must support the requirement for having the user right. The requirement must be documented with the IAO. The application account must meet requirements for application account passwords, such as length (V-36661) and required changes frequency (V-36662).ECLP-1
Checks: C-46929r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Bypass traverse checking" user right, this is a finding: Administrators Authenticated Users Local Service Network Service Window Manager\Window Manager Group

Fix: F-45137r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Bypass traverse checking" to only include the following accounts or groups: Administrators Authenticated Users Local Service Network Service Window Manager\Window Manager Group

b
Unauthorized accounts must not have the Change the system time user right.
AC-6 - Medium - CCI-002235 - V-26476 - SV-53118r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000009
Vuln IDs
  • V-26476
Rule IDs
  • SV-53118r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Change the system time" user right can change the system time, which can impact authentication, as well as affect time stamps on event log entries.ECLP-1
Checks: C-47424r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Change the system time" user right, this is a finding: Administrators Local Service

Fix: F-46044r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Change the system time" to only include the following accounts or groups: Administrators Local Service

a
Unauthorized accounts must not have the Change the time zone user right.
CM-6 - Low - CCI-000366 - V-26477 - SV-53117r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-UR-000010
Vuln IDs
  • V-26477
Rule IDs
  • SV-53117r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Change the time zone" user right can change the time zone of a system.ECLP-1
Checks: C-47423r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Change the time zone" user right, this is a finding: Administrators Local Service

Fix: F-46043r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Change the time zone" to only include the following accounts or groups: Administrators Local Service

b
Unauthorized accounts must not have the Create a pagefile user right.
AC-6 - Medium - CCI-002235 - V-26478 - SV-53063r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000011
Vuln IDs
  • V-26478
Rule IDs
  • SV-53063r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Create a pagefile" user right can change the size of a pagefile, which could affect system performance.ECLP-1
Checks: C-47369r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Create a pagefile" user right, this is a finding: Administrators

Fix: F-45989r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Create a pagefile" to only include the following accounts or groups: Administrators

c
Unauthorized accounts must not have the Create a token object user right.
AC-6 - High - CCI-002235 - V-26479 - SV-52113r1_rule
RMF Control
AC-6
Severity
H
CCI
CCI-002235
Version
WN12-UR-000012
Vuln IDs
  • V-26479
Rule IDs
  • SV-52113r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Create a token object" user right allows a process to create an access token. This could be used to provide elevated rights and compromise a system.If an application requires this user right, this can be downgraded to a CAT III if the following conditions are met: Vendor documentation must support the requirement for having the user right. The requirement must be documented with the IAO. The application account must meet requirements for application account passwords, such as length (V-36661) and required changes frequency (V-36662).ECLP-1
Checks: C-46930r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups are granted the "Create a token object" user right, this is a finding.

Fix: F-45138r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Create a token object" to be defined but containing no entries (blank).

b
Unauthorized accounts must not have the Create global objects user right.
AC-6 - Medium - CCI-002235 - V-26480 - SV-52114r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000013
Vuln IDs
  • V-26480
Rule IDs
  • SV-52114r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Create global objects" user right can create objects that are available to all sessions, which could affect processes in other users' sessions. If an application requires this user right, this can be downgraded to not a finding if the following conditions are met: Vendor documentation must support the requirement for having the user right. The requirement must be documented with the IAO. The application account must meet requirements for application account passwords, such as length (V-36661) and required changes frequency (V-36662).ECLP-1
Checks: C-46931r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Create global objects" user right, this is a finding: Administrators Service Local Service Network Service

Fix: F-45139r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Create global objects" to only include the following accounts or groups: Administrators Service Local Service Network Service

b
Unauthorized accounts must not have the Create permanent shared objects user right.
AC-6 - Medium - CCI-002235 - V-26481 - SV-53059r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000014
Vuln IDs
  • V-26481
Rule IDs
  • SV-53059r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Create permanent shared objects" user right could expose sensitive data by creating shared objects.ECLP-1
Checks: C-47365r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups are granted the "Create permanent shared objects" user right, this is a finding.

Fix: F-45985r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Create permanent shared objects" to be defined but containing no entries (blank).

b
Unauthorized accounts must not have the Create symbolic links user right.
AC-6 - Medium - CCI-002235 - V-26482 - SV-53054r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000015
Vuln IDs
  • V-26482
Rule IDs
  • SV-53054r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Create symbolic links" user right can create pointers to other objects, which could potentially expose the system to attack.ECLP-1
Checks: C-47361r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Create symbolic links" user right, this is a finding: Administrators

Fix: F-45980r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Create symbolic links" to only include the following accounts or groups: Administrators

b
The Deny log on as a batch job user right on member servers must be configured to prevent access from highly privileged domain accounts on domain systems, and from unauthenticated access on all systems.
AC-3 - Medium - CCI-000213 - V-26483 - SV-51502r1_rule
RMF Control
AC-3
Severity
M
CCI
CCI-000213
Version
WN12-UR-000018-MS
Vuln IDs
  • V-26483
Rule IDs
  • SV-51502r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on as a batch job" user right defines accounts that are prevented from logging on to the system as a batch job such, as Task Scheduler. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks which could lead to the compromise of an entire domain. The Guests group must be assigned to prevent unauthenticated access.ECLP-1
Checks: C-46807r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If the following accounts or groups are not defined for the "Deny log on as a batch job" user right, this is a finding: Domain Systems Only: Enterprise Admins Group Domain Admins Group All Systems: Guests Group

Fix: F-44652r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Deny log on as a batch job" to include the following: Domain Systems Only: Enterprise Admins Group Domain Admins Group All Systems: Guests Group

b
The Deny log on as a service user right on member servers must be configured to prevent access from highly privileged domain accounts on domain systems. No other groups or accounts must be assigned this right.
AC-3 - Medium - CCI-000213 - V-26484 - SV-51504r1_rule
RMF Control
AC-3
Severity
M
CCI
CCI-000213
Version
WN12-UR-000019-MS
Vuln IDs
  • V-26484
Rule IDs
  • SV-51504r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on as a service" user right defines accounts that are denied log on as a service. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks which could lead to the compromise of an entire domain. Incorrect configurations could prevent services from starting and result in a DoS.ECLP-1
Checks: C-46808r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If the following accounts or groups are not defined for the "Deny log on as a service" user right on domain-joined systems, this is a finding: Enterprise Admins Group Domain Admins Group If any accounts or groups are defined for the "Deny log on as a service" user right on non-domain-joined systems, this is a finding.

Fix: F-44654r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Deny log on as a service" to include the following for domain-joined systems: Enterprise Admins Group Domain Admins Group Configure the "Deny log on as a service" for nondomain systems to include no entries (blank).

b
The Deny log on locally user right on member servers must be configured to prevent access from highly privileged domain accounts on domain systems, and from unauthenticated access on all systems.
AC-3 - Medium - CCI-000213 - V-26485 - SV-51508r2_rule
RMF Control
AC-3
Severity
M
CCI
CCI-000213
Version
WN12-UR-000020-MS
Vuln IDs
  • V-26485
Rule IDs
  • SV-51508r2_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on locally" user right defines accounts that are prevented from logging on interactively. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks which could lead to the compromise of an entire domain. The Guests group must be assigned this right to prevent unauthenticated access.ECLP-1
Checks: C-49587r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If the following accounts or groups are not defined for the "Deny log on locally" user right, this is a finding: Domain Systems Only: Enterprise Admins Group Domain Admins Group Systems dedicated to the management of Active Directory (AD admin platforms, see V-36436 in the Active Directory Domain STIG) are exempt from this. All Systems: Guests Group

Fix: F-49929r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Deny log on locally" to include the following: Domain Systems Only: Enterprise Admins Group Domain Admins Group Systems dedicated to the management of Active Directory (AD admin platforms, see V-36436 in the Active Directory Domain STIG) are exempt from this. All Systems: Guests Group

b
The Deny log on through Remote Desktop Services user right on member servers must be configured to prevent access from highly privileged domain accounts and local administrator accounts on domain systems, and from unauthenticated access on all systems.
AC-3 - Medium - CCI-000213 - V-26486 - SV-51509r2_rule
RMF Control
AC-3
Severity
M
CCI
CCI-000213
Version
WN12-UR-000021-MS
Vuln IDs
  • V-26486
Rule IDs
  • SV-51509r2_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on through Remote Desktop Services" user right defines the accounts that are prevented from logging on using Remote Desktop Services. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks which could lead to the compromise of an entire domain. Local administrator accounts on domain-joined systems must also be assigned this right to decrease the risk of lateral movement resulting from credential theft attacks. The Guests group must be assigned this right to prevent unauthenticated access.ECLP-1
Checks: C-49478r3_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If the following accounts or groups are not defined for the "Deny log on through Remote Desktop Services" user right, this is a finding: Domain Systems Only: Enterprise Admins group Domain Admins group *All Local Administrator Accounts: Windows 2012 - use the DenyNetworkAccess group - see V-45589 **Windows 2012 R2 - use "Local account" or "Local account and member of Administrators group" All Systems: Guests group Systems dedicated to the management of Active Directory (AD admin platforms, see V-36436 in the Active Directory Domain STIG) are exempt from denying the Enterprise Admins and Domain Admins groups. The related automated benchmarks will verify the group "DenyNetworkAccess" has been assigned this right on domain systems, and that it contains all local accounts that are also members of the Administrators group. Use of other methods may result in false positives requiring manual validation. *Do not use the built-in Administrators group. This group must contain the appropriate accounts/groups responsible for administering the system. **Windows 2012 R2 added new built-in security groups for assigning permissions and rights to local accounts. Use these groups instead of creating a group for local administrator accounts to apply to this and other deny rights where required. Assign the group "Local account and member of Administrators group" or the more restrictive "Local account".

Fix: F-49699r4_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Deny log on through Remote Desktop Services" to include the following: Domain Systems Only: Enterprise Admins group Domain Admins group *All Local Administrator Accounts: Windows 2012 - use the DenyNetworkAccess group - see V-45589 **Windows 2012 R2 - use "Local account" or "Local account and member of Administrators group" All Systems: Guests group Systems dedicated to the management of Active Directory (AD admin platforms, see V-36436 in the Active Directory Domain STIG) are exempt from denying the Enterprise Admins and Domain Admins groups. The related automated benchmarks will verify the group "DenyNetworkAccess" has been assigned this right on domain systems, and that it contains all local accounts that are also members of the Administrators group. Use of other methods may result in false positives requiring manual validation. *Do not use the built-in Administrators group. This group must contain the appropriate accounts/groups responsible for administering the system. **Windows 2012 R2 added new built-in security groups for assigning permissions and rights to local accounts. Use these groups instead of creating a group for local administrator accounts to apply to this and other deny rights where required. Assign the group "Local account and member of Administrators group" or the more restrictive "Local account".

b
Unauthorized accounts must not have the Enable computer and user accounts to be trusted for delegation user right on member servers.
AC-6 - Medium - CCI-002235 - V-26487 - SV-51500r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000022-MS
Vuln IDs
  • V-26487
Rule IDs
  • SV-51500r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Enable computer and user accounts to be trusted for delegation" user right allows the "Trusted for Delegation" setting to be changed. This could potentially allow unauthorized users to impersonate other users.ECLP-1
Checks: C-46805r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups are granted the "Enable computer and user accounts to be trusted for delegation" user right, this is a finding.

Fix: F-44649r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Enable computer and user accounts to be trusted for delegation" to be defined but containing no entries (blank).

b
Unauthorized accounts must not have the Force shutdown from a remote system user right.
AC-6 - Medium - CCI-002235 - V-26488 - SV-53050r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000023
Vuln IDs
  • V-26488
Rule IDs
  • SV-53050r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Force shutdown from a remote system" user right can remotely shut down a system, which could result in a DoS.ECLP-1
Checks: C-47356r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Force shutdown from a remote system" user right, this is a finding: Administrators

Fix: F-45976r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Force shutdown from a remote system" to only include the following accounts or groups: Administrators

b
Unauthorized accounts must not have the Generate security audits user right.
AC-6 - Medium - CCI-002235 - V-26489 - SV-52116r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000024
Vuln IDs
  • V-26489
Rule IDs
  • SV-52116r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Generate security audits" user right specifies users and processes that can generate Security Log audit records, which must only be the system service accounts defined.If an application requires this user right, this can be downgraded to not a finding if the following conditions are met: Vendor documentation must support the requirement for having the user right. The requirement must be documented with the IAO. The application account must meet requirements for application account passwords, such as length (V-36661) and required changes frequency (V-36662).ECLP-1
Checks: C-46933r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Generate security audits" user right, this is a finding: Local Service Network Service

Fix: F-45141r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Generate security audits" to only include the following accounts or groups: Local Service Network Service

b
Unauthorized accounts must not have the Impersonate a client after authentication user right.
AC-6 - Medium - CCI-002235 - V-26490 - SV-52117r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000025
Vuln IDs
  • V-26490
Rule IDs
  • SV-52117r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Impersonate a client after authentication" user right allows a program to impersonate another user or account to run on their behalf. An attacker could potentially use this to elevate privileges.If an application requires this user right, this can be downgraded to not a finding if the following conditions are met: Vendor documentation must support the requirement for having the user right. The requirement must be documented with the IAO. The application account must meet requirements for application account passwords, such as length (V-36661) and required changes frequency (V-36662).ECLP-1
Checks: C-46934r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Impersonate a client after authentication" user right, this is a finding: Administrators Service Local Service Network Service

Fix: F-45142r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Impersonate a client after authentication" to only include the following accounts or groups: Administrators Service Local Service Network Service

b
Unauthorized accounts must not have the Increase a process working set user right.
AC-6 - Medium - CCI-002235 - V-26491 - SV-53047r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000026
Vuln IDs
  • V-26491
Rule IDs
  • SV-53047r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Increase a process working set" user right can change the size of a process's working set, potentially causing performance issues or a DoS.ECLP-1
Checks: C-47353r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Increase a process working set" user right, this is a finding: Administrators Local Service Window Manager\Window Manager Group

Fix: F-45973r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Increase a process working set" to only include the following accounts or groups: Administrators Local Service Window Manager\Window Manager Group

b
Unauthorized accounts must not have the Increase scheduling priority user right.
AC-6 - Medium - CCI-002235 - V-26492 - SV-52118r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000027
Vuln IDs
  • V-26492
Rule IDs
  • SV-52118r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Increase scheduling priority" user right can change a scheduling priority causing performance issues or a DoS.If an application requires this user right, this can be downgraded to not a finding if the following conditions are met: Vendor documentation must support the requirement for having the user right. The requirement must be documented with the IAO. The application account must meet requirements for application account passwords, such as length (V-36661) and required changes frequency (V-36662).ECLP-1
Checks: C-46936r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Increase scheduling priority" user right, this is a finding: Administrators

Fix: F-45143r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Increase scheduling priority" to only include the following accounts or groups: Administrators

b
Unauthorized accounts must not have the Load and unload device drivers user right.
AC-6 - Medium - CCI-002235 - V-26493 - SV-53043r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000028
Vuln IDs
  • V-26493
Rule IDs
  • SV-53043r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Load and unload device drivers" user right allows device drivers to dynamically be loaded on a system by a user. This could potentially be used to install malicious code by an attacker.ECLP-1
Checks: C-47349r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Load and unload device drivers" user right, this is a finding: Administrators

Fix: F-45969r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Load and unload device drivers" to only include the following accounts or groups: Administrators

b
Unauthorized accounts must not have the Lock pages in memory user right.
AC-6 - Medium - CCI-002235 - V-26494 - SV-52119r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000029
Vuln IDs
  • V-26494
Rule IDs
  • SV-52119r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Lock pages in memory" user right allows physical memory to be assigned to processes, which could cause performance issues or a DoS.If an application requires this user right, this can be downgraded to not a finding if the following conditions are met: Vendor documentation must support the requirement for having the user right. The requirement must be documented with the IAO. The application account must meet requirements for application account passwords, such as length (V-36661) and required changes frequency (V-36662).ECLP-1
Checks: C-46937r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups are granted the "Lock pages in memory" user right, this is a finding.

Fix: F-45144r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Lock pages in memory" to be defined but containing no entries (blank).

b
Unauthorized accounts must not have the Log on as a batch job user right.
AC-3 - Medium - CCI-000213 - V-26495 - SV-52120r1_rule
RMF Control
AC-3
Severity
M
CCI
CCI-000213
Version
WN12-UR-000030
Vuln IDs
  • V-26495
Rule IDs
  • SV-52120r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Log on as a batch job" user right allows accounts to log on using the task scheduler service, which must be restricted.If an application requires this user right, this can be downgraded to not a finding if the following conditions are met: Vendor documentation must support the requirement for having the user right. The requirement must be documented with the IAO. The application account must meet requirements for application account passwords, such as length (V-36661) and required changes frequency (V-36662).ECLP-1
Checks: C-46938r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Log on as a batch job" user right, this is a finding: Administrators

Fix: F-45145r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Log on as a batch job" to only include the following accounts or groups: Administrators

b
Unauthorized accounts must not have the Manage auditing and security log user right.
AU-9 - Medium - CCI-000162 - V-26496 - SV-53039r1_rule
RMF Control
AU-9
Severity
M
CCI
CCI-000162
Version
WN12-UR-000032
Vuln IDs
  • V-26496
Rule IDs
  • SV-53039r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Manage auditing and security log" user right can manage the security log and change auditing configurations. This could be used to clear evidence of tampering. ECLP-1
Checks: C-47345r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Manage auditing and security log" user right, this is a finding: Administrators If the site has an Auditors group that further limits this privilege this would not be a finding.

Fix: F-45965r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Manage auditing and security log" to only include the following accounts or groups: Administrators

b
Unauthorized accounts must not have the Modify an object label user right.
AC-6 - Medium - CCI-002235 - V-26497 - SV-53033r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000033
Vuln IDs
  • V-26497
Rule IDs
  • SV-53033r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Modify an object label" user right can change the integrity label of an object. This could potentially be used to execute code at a higher privilege.ECLP-1
Checks: C-47338r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups are granted the "Modify an object label" user right, this is a finding.

Fix: F-45958r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Modify an object label" to be defined but containing no entries (blank).

b
Unauthorized accounts must not have the Modify firmware environment values user right.
AC-6 - Medium - CCI-002235 - V-26498 - SV-53029r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000034
Vuln IDs
  • V-26498
Rule IDs
  • SV-53029r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Modify firmware environment values" user right can change hardware configuration environment variables. This could result in hardware failures or a DoS.ECLP-1
Checks: C-47334r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Modify firmware environment values" user right, this is a finding: Administrators

Fix: F-45955r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Modify firmware environment values" to only include the following accounts or groups: Administrators

b
Unauthorized accounts must not have the Perform volume maintenance tasks user right.
AC-6 - Medium - CCI-002235 - V-26499 - SV-53025r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000035
Vuln IDs
  • V-26499
Rule IDs
  • SV-53025r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Perform volume maintenance tasks" user right can manage volume and disk configurations. They could potentially delete volumes, resulting in data loss or a DoS.ECLP-1
Checks: C-47330r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Perform volume maintenance tasks" user right, this is a finding: Administrators

Fix: F-45951r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Perform volume maintenance tasks" to only include the following accounts or groups: Administrators

b
Unauthorized accounts must not have the Profile single process user right.
AC-6 - Medium - CCI-002235 - V-26500 - SV-53022r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000036
Vuln IDs
  • V-26500
Rule IDs
  • SV-53022r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Profile single process" user right can monitor nonsystem processes performance. An attacker could potentially use this to identify processes to attack.ECLP-1
Checks: C-47328r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Profile single process" user right, this is a finding: Administrators

Fix: F-45948r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Profile single process" to only include the following accounts or groups: Administrators

b
Unauthorized accounts must not have the Profile system performance user right.
AC-6 - Medium - CCI-002235 - V-26501 - SV-53019r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000037
Vuln IDs
  • V-26501
Rule IDs
  • SV-53019r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Profile system performance" user right can monitor system processes performance. An attacker could potentially use this to identify processes to attack.ECLP-1
Checks: C-47325r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Profile system performance" user right, this is a finding: Administrators NT Service\WdiServiceHost

Fix: F-45945r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Profile system performance" to only include the following accounts or groups: Administrators NT Service\WdiServiceHost

b
Unauthorized accounts must not have the Replace a process level token user right.
AC-6 - Medium - CCI-002235 - V-26503 - SV-52121r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000039
Vuln IDs
  • V-26503
Rule IDs
  • SV-52121r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Replace a process level token" user right allows one process or service to start another process or service with a different security access token. A user with this right could use this to impersonate another account.If an application requires this user right, this can be downgraded to not a finding if the following conditions are met: Vendor documentation must support the requirement for having the user right. The requirement must be documented with the IAO. The application account must meet requirements for application account passwords, such as length (V-36661) and required changes frequency (V-36662).ECLP-1
Checks: C-46939r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Replace a process level token" user right, this is a finding: Local Service Network Service

Fix: F-45146r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Replace a process level token" to only include the following accounts or groups: Local Service Network Service

b
Unauthorized accounts must not have the Restore files and directories user right.
AC-6 - Medium - CCI-002235 - V-26504 - SV-52122r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000040
Vuln IDs
  • V-26504
Rule IDs
  • SV-52122r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Restore files and directories" user right can circumvent file and directory permissions and could allow access to sensitive data. It could also be used to overwrite more current data.If an application requires this user right, this can be downgraded to not a finding if the following conditions are met: Vendor documentation must support the requirement for having the user right. The requirement must be documented with the IAO. The application account must meet requirements for application account passwords, such as length (V-36661) and required changes frequency (V-36662).ECLP-1
Checks: C-46940r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Restore files and directories" user right, this is a finding: Administrators

Fix: F-45147r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Restore files and directories" to only include the following accounts or groups: Administrators

b
Unauthorized accounts must not have the Shut down the system user right.
AC-6 - Medium - CCI-002235 - V-26505 - SV-53016r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000041
Vuln IDs
  • V-26505
Rule IDs
  • SV-53016r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Shut down the system" user right can interactively shut down a system, which could result in a DoS.ECLP-1
Checks: C-47323r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Shut down the system" user right, this is a finding: Administrators

Fix: F-45943r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Shut down the system" to only include the following accounts or groups: Administrators

b
Unauthorized accounts must not have the Take ownership of files or other objects user right.
AC-6 - Medium - CCI-002235 - V-26506 - SV-52123r1_rule
RMF Control
AC-6
Severity
M
CCI
CCI-002235
Version
WN12-UR-000042
Vuln IDs
  • V-26506
Rule IDs
  • SV-52123r1_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Take ownership of files or other objects" user right can take ownership of objects and make changes.If an application requires this user right, this can be downgraded to not a finding if the following conditions are met: Vendor documentation must support the requirement for having the user right. The requirement must be documented with the IAO. The application account must meet requirements for application account passwords, such as length (V-36661) and required changes frequency (V-36662).ECLP-1
Checks: C-46941r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy -&gt; Computer Configuration -&gt; Windows Settings -&gt; Security Settings -&gt; Local Policies -&gt; User Rights Assignment. If any accounts or groups other than the following are granted the "Take ownership of files or other objects" user right, this is a finding: Administrators

Fix: F-45148r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Take ownership of files or other objects" to only include the following accounts or groups: Administrators

b
The system must be configured to audit Account Logon - Credential Validation successes.
AU-12 - Medium - CCI-000172 - V-26529 - SV-53013r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000001
Vuln IDs
  • V-26529
Rule IDs
  • SV-53013r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Credential validation records events related to validation tests on credentials for a user account logon. ECAR-3, ECAR-2
Checks: C-47320r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Account Logon -&gt; Credential Validation - Success

Fix: F-45940r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Account Logon -> "Audit Credential Validation" with "Success" selected.

b
The system must be configured to audit Account Logon - Credential Validation failures.
AU-12 - Medium - CCI-000172 - V-26530 - SV-53011r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000002
Vuln IDs
  • V-26530
Rule IDs
  • SV-53011r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Credential validation records events related to validation tests on credentials for a user account logon. ECAR-2, ECAR-3
Checks: C-47318r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Account Logon -&gt; Credential Validation - Failure

Fix: F-45938r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Account Logon -> "Audit Credential Validation" with "Failure" selected.

b
The system must be configured to audit Account Logon - Computer Account Management successes.
AU-12 - Medium - CCI-000172 - V-26531 - SV-52234r2_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000011
Vuln IDs
  • V-26531
Rule IDs
  • SV-52234r2_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Computer Account Management records events such as creating, changing, deleting, renaming, disabling, or enabling computer accounts.ECAR-2, ECAR-3
Checks: C-46972r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Account Management -&gt; Computer Account Management - Success

Fix: F-45249r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Account Management -> "Audit Computer Account Management" with "Success" selected.

b
The system must be configured to audit Account Logon - Computer Account Management failures.
AU-12 - Medium - CCI-000172 - V-26532 - SV-52235r2_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000012
Vuln IDs
  • V-26532
Rule IDs
  • SV-52235r2_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Computer Account Management records events such as creating, changing, deleting, renaming, disabling, or enabling computer accounts.ECAR-2, ECAR-3
Checks: C-46973r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Account Management -&gt; Computer Account Management - Failure

Fix: F-45250r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Account Management -> "Audit Computer Account Management" with "Failure" selected.

b
The system must be configured to audit Account Management - Other Account Management Events successes.
AU-12 - Medium - CCI-000172 - V-26533 - SV-53009r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000015
Vuln IDs
  • V-26533
Rule IDs
  • SV-53009r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Other Account Management Events records events such as the access of a password hash or the Password Policy Checking API being called.ECAR-2, ECAR-3
Checks: C-47317r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Account Management -&gt; Other Account Management Events - Success

Fix: F-45936r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Account Management -> "Audit Other Account Management Events" with "Success" selected.

b
The system must be configured to audit Account Management - Other Account Management Events failures.
AU-12 - Medium - CCI-000172 - V-26534 - SV-53008r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000016
Vuln IDs
  • V-26534
Rule IDs
  • SV-53008r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Other Account Management Events records events such as the access of a password hash or the Password Policy Checking API being called.ECAR-2, ECAR-3
Checks: C-47315r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Account Management -&gt; Other Account Management Events - Failure

Fix: F-45935r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Account Management -> "Audit Other Account Management Events" with "Failure" selected.

b
The system must be configured to audit Account Management - Security Group Management successes.
AU-12 - Medium - CCI-000172 - V-26535 - SV-53007r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000017
Vuln IDs
  • V-26535
Rule IDs
  • SV-53007r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Security Group Management records events such as creating, deleting, or changing security groups, including changes in group members.ECAR-2, ECAR-3
Checks: C-47314r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Account Management -&gt; Security Group Management - Success

Fix: F-45934r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Account Management -> "Audit Security Group Management" with "Success" selected.

b
The system must be configured to audit Account Management - Security Group Management failures.
AU-12 - Medium - CCI-000172 - V-26536 - SV-53005r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000018
Vuln IDs
  • V-26536
Rule IDs
  • SV-53005r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Security Group Management records events such as creating, deleting, or changing security groups, including changes in group members.ECAR-3, ECAR-2
Checks: C-47312r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Account Management -&gt; Security Group Management - Failure

Fix: F-45932r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Account Management -> "Audit Security Group Management" with "Failure" selected.

b
The system must be configured to audit Account Management - User Account Management successes.
AU-12 - Medium - CCI-000172 - V-26537 - SV-53003r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000019
Vuln IDs
  • V-26537
Rule IDs
  • SV-53003r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. User Account Management records events such as creating, changing, deleting, renaming, disabling, or enabling user accounts.ECAR-3, ECAR-2
Checks: C-47310r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Account Management -&gt; User Account Management - Success

Fix: F-45930r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Account Management -> "Audit User Account Management" with "Success" selected.

b
The system must be configured to audit Account Management - User Account Management failures.
AU-12 - Medium - CCI-000172 - V-26538 - SV-53001r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000020
Vuln IDs
  • V-26538
Rule IDs
  • SV-53001r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. User Account Management records events such as creating, changing, deleting, renaming, disabling, or enabling user accounts.ECAR-3, ECAR-2
Checks: C-47308r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Account Management -&gt; User Account Management - Failure

Fix: F-45928r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Account Management -> "Audit User Account Management" with "Failure" selected.

b
The system must be configured to audit Detailed Tracking - Process Creation successes.
AU-12 - Medium - CCI-000172 - V-26539 - SV-52999r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000023
Vuln IDs
  • V-26539
Rule IDs
  • SV-52999r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Process Creation records events related to the creation of a process and the source.ECAR-2, ECAR-3
Checks: C-47306r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Detailed Tracking -&gt; Process Creation - Success

Fix: F-45926r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Detailed Tracking -> "Audit Process Creation" with "Success" selected.

b
The system must be configured to audit Logon/Logoff - Logoff successes.
AU-12 - Medium - CCI-000172 - V-26540 - SV-52996r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000045
Vuln IDs
  • V-26540
Rule IDs
  • SV-52996r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Logoff records user logoffs. If this is an interactive logoff, it is recorded on the local system. If it is to a network share, it is recorded on the system accessed.ECAR-2, ECAR-3
Checks: C-47303r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Logon/Logoff -&gt; Logoff - Success

Fix: F-45923r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Logon/Logoff -> "Audit Logoff" with "Success" selected.

b
The system must be configured to audit Logon/Logoff - Logon successes.
AU-12 - Medium - CCI-000172 - V-26541 - SV-52994r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000047
Vuln IDs
  • V-26541
Rule IDs
  • SV-52994r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Logon records user logons. If this is an interactive logon, it is recorded on the local system. If it is to a network share, it is recorded on the system accessed.ECAR-2, ECAR-3
Checks: C-47301r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Logon/Logoff -&gt; Logon - Success

Fix: F-45921r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Logon/Logoff -> "Audit Logon" with "Success" selected.

b
The system must be configured to audit Logon/Logoff - Logon failures.
AU-12 - Medium - CCI-000172 - V-26542 - SV-52993r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000048
Vuln IDs
  • V-26542
Rule IDs
  • SV-52993r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Logon records user logons. If this is an interactive logon, it is recorded on the local system. If it is to a network share, it is recorded on the system accessed.ECAR-3, ECAR-2
Checks: C-47300r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Logon/Logoff -&gt; Logon - Failure

Fix: F-45920r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Logon/Logoff -> "Audit Logon" with "Failure" selected.

b
The system must be configured to audit Logon/Logoff - Special Logon successes.
AU-12 - Medium - CCI-000172 - V-26543 - SV-52987r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000053
Vuln IDs
  • V-26543
Rule IDs
  • SV-52987r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Special Logon records special logons which have administrative privileges and can be used to elevate processes.ECAR-3, ECAR-2
Checks: C-47293r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Logon/Logoff -&gt; Special Logon - Success

Fix: F-45913r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Logon/Logoff -> "Audit Special Logon" with "Success" selected.

b
The system must be configured to audit Object Access - File System failures.
AU-12 - Medium - CCI-000172 - V-26544 - SV-52986r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000068
Vuln IDs
  • V-26544
Rule IDs
  • SV-52986r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. File System auditing under Object Access is used to enable the recording of events related to the access and changing of files and directories. Auditing must also be enabled on the specific file system objects to be audited.ECAR-2, ECAR-3
Checks: C-47292r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Object Access -&gt; File System - Failure

Fix: F-45912r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Object Access -> "Audit File System" with "Failure" selected.

b
The system must be configured to audit Object Access - Registry failures.
AU-12 - Medium - CCI-000172 - V-26545 - SV-52984r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000080
Vuln IDs
  • V-26545
Rule IDs
  • SV-52984r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Registry auditing under Object Access is used to enable the recording of events related to the access and changing of the registry. Auditing must also be enabled on the specific registry objects to be audited.ECAR-3, ECAR-2
Checks: C-47290r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Object Access -&gt; Registry - Failure

Fix: F-45910r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Object Access -> "Audit Registry" with "Failure" selected.

b
The system must be configured to audit Policy Change - Audit Policy Change successes.
AU-12 - Medium - CCI-000172 - V-26546 - SV-52983r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000085
Vuln IDs
  • V-26546
Rule IDs
  • SV-52983r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Policy Change records events related to changes in audit policy.ECAR-3, ECAR-2
Checks: C-47289r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Policy Change -&gt; Audit Policy Change - Success

Fix: F-45909r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Policy Change -> "Audit Audit Policy Change" with "Success" selected.

b
The system must be configured to audit Policy Change - Audit Policy Change failures.
AU-12 - Medium - CCI-000172 - V-26547 - SV-52982r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000086
Vuln IDs
  • V-26547
Rule IDs
  • SV-52982r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Policy Change records events related to changes in audit policy.ECAR-3, ECAR-2
Checks: C-47288r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Policy Change -&gt; Audit Policy Change - Failure

Fix: F-45908r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Policy Change -> "Audit Audit Policy Change" with "Failure" selected.

b
The system must be configured to audit Policy Change - Authentication Policy Change successes.
AU-12 - Medium - CCI-000172 - V-26548 - SV-52981r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000087
Vuln IDs
  • V-26548
Rule IDs
  • SV-52981r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Authentication Policy Change records events related to changes in authentication policy, including Kerberos policy and Trust changes.ECAR-2, ECAR-3
Checks: C-47287r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Policy Change -&gt; Authentication Policy Change - Success

Fix: F-45907r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Policy Change -> "Audit Authentication Policy Change" with "Success" selected.

b
The system must be configured to audit Privilege Use - Sensitive Privilege Use successes.
AU-12 - Medium - CCI-000172 - V-26549 - SV-52980r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000101
Vuln IDs
  • V-26549
Rule IDs
  • SV-52980r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Sensitive Privilege Use records events related to use of sensitive privileges, such as "Act as part of the operating system" or "Debug programs".ECAR-2, ECAR-3
Checks: C-47286r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Privilege Use -&gt; Sensitive Privilege Use - Success

Fix: F-45906r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Privilege Use -> "Audit Sensitive Privilege Use" with "Success" selected.

b
The system must be configured to audit Privilege Use - Sensitive Privilege Use failures.
AU-12 - Medium - CCI-000172 - V-26550 - SV-52979r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000102
Vuln IDs
  • V-26550
Rule IDs
  • SV-52979r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Sensitive Privilege Use records events related to use of sensitive privileges, such as "Act as part of the operating system" or "Debug programs".ECAR-3, ECAR-2
Checks: C-47285r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Privilege Use -&gt; Sensitive Privilege Use - Failure

Fix: F-45905r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Privilege Use -> "Audit Sensitive Privilege Use" with "Failure" selected.

b
The system must be configured to audit System - IPsec Driver successes.
AU-12 - Medium - CCI-000172 - V-26551 - SV-52978r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000103
Vuln IDs
  • V-26551
Rule IDs
  • SV-52978r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. IPsec Driver records events related to the IPSec Driver such as dropped packets.ECAR-2, ECAR-3
Checks: C-47284r2_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. System -&gt; IPsec Driver - Success

Fix: F-45904r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> System -> "Audit IPsec Driver" with "Success" selected.

b
The system must be configured to audit System - IPsec Driver failures.
AU-12 - Medium - CCI-000172 - V-26552 - SV-52977r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000104
Vuln IDs
  • V-26552
Rule IDs
  • SV-52977r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. IPsec Driver records events related to the IPsec Driver such as dropped packets.ECAR-2, ECAR-3
Checks: C-47283r2_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. System -&gt; IPsec Driver - Failure

Fix: F-45903r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> System -> "Audit IPsec Driver" with "Failure" selected.

b
The system must be configured to audit System - Security State Change successes.
AU-12 - Medium - CCI-000172 - V-26553 - SV-52976r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000107
Vuln IDs
  • V-26553
Rule IDs
  • SV-52976r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Security State Change records events related to changes in the security state, such as startup and shutdown of the system.ECAR-3, ECAR-2
Checks: C-47282r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. System -&gt; Security State Change - Success

Fix: F-45902r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> System -> "Audit Security State Change" with "Success" selected.

b
The system must be configured to audit System - Security State Change failures.
AU-12 - Medium - CCI-000172 - V-26554 - SV-52975r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000108
Vuln IDs
  • V-26554
Rule IDs
  • SV-52975r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Security State Change records events related to changes in the security state, such as startup and shutdown of the system.ECAR-3, ECAR-2
Checks: C-47281r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. System -&gt; Security State Change - Failure

Fix: F-45901r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> System -> "Audit Security State Change" with "Failure" selected.

b
The system must be configured to audit System - Security System Extension successes.
AU-12 - Medium - CCI-000172 - V-26555 - SV-52974r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000109
Vuln IDs
  • V-26555
Rule IDs
  • SV-52974r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Security System Extension records events related to extension code being loaded by the security subsystem.ECAR-3, ECAR-2
Checks: C-47280r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. System -&gt; Security System Extension - Success

Fix: F-45900r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> System -> "Audit Security System Extension" with "Success" selected.

b
The system must be configured to audit System - Security System Extension failures.
AU-12 - Medium - CCI-000172 - V-26556 - SV-52973r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000110
Vuln IDs
  • V-26556
Rule IDs
  • SV-52973r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Security System Extension records events related to extension code being loaded by the security subsystem.ECAR-2, ECAR-3
Checks: C-47279r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. System -&gt; Security System Extension - Failure

Fix: F-45899r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> System -> "Audit Security System Extension" with "Failure" selected.

b
The system must be configured to audit System - System Integrity successes.
AU-12 - Medium - CCI-000172 - V-26557 - SV-52972r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000111
Vuln IDs
  • V-26557
Rule IDs
  • SV-52972r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. System Integrity records events related to violations of integrity to the security subsystem.ECAR-3, ECAR-2
Checks: C-47278r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. System -&gt; System Integrity - Success

Fix: F-45898r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> System -> "Audit System Integrity" with "Success" selected.

b
The system must be configured to audit System - System Integrity failures.
AU-12 - Medium - CCI-000172 - V-26558 - SV-52971r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000112
Vuln IDs
  • V-26558
Rule IDs
  • SV-52971r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. System Integrity records events related to violations of integrity to the security subsystem.ECAR-3, ECAR-2
Checks: C-47277r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. System -&gt; System Integrity - Failure

Fix: F-45897r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> System -> "Audit System Integrity" with "Failure" selected.

b
The 6to4 IPv6 transition technology must be disabled.
CM-7 - Medium - CCI-000381 - V-26575 - SV-52970r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000007
Vuln IDs
  • V-26575
Rule IDs
  • SV-52970r1_rule
IPv6 transition technologies, which tunnel packets through other protocols, do not provide visibility.ECSC-1
Checks: C-47276r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\TCPIP\v6Transition\ Value Name: 6to4_State Type: REG_SZ Value: Disabled

Fix: F-45896r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Network -> TCPIP Settings -> IPv6 Transition Technologies -> "Set 6to4 State" to "Enabled: Disabled State".

b
The IP-HTTPS IPv6 transition technology must be disabled.
CM-7 - Medium - CCI-000381 - V-26576 - SV-52969r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000008
Vuln IDs
  • V-26576
Rule IDs
  • SV-52969r1_rule
IPv6 transition technologies, which tunnel packets through other protocols, do not provide visibility.ECSC-1
Checks: C-47275r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\TCPIP\v6Transition\IPHTTPS\IPHTTPSInterface\ Value Name: IPHTTPS_ClientState Type: REG_DWORD Value: 3

Fix: F-45895r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Network -> TCPIP Settings -> IPv6 Transition Technologies -> "Set IP-HTTPS State" to "Enabled: Disabled State". Note: "IPHTTPS URL:" must be entered in the policy even if set to Disabled State. Enter "about:blank".

b
The ISATAP IPv6 transition technology must be disabled.
CM-7 - Medium - CCI-000381 - V-26577 - SV-52968r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000009
Vuln IDs
  • V-26577
Rule IDs
  • SV-52968r1_rule
IPv6 transition technologies, which tunnel packets through other protocols, do not provide visibility.ECSC-1
Checks: C-47274r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\TCPIP\v6Transition\ Value Name: ISATAP_State Type: REG_SZ Value: Disabled

Fix: F-45894r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Network -> TCPIP Settings -> IPv6 Transition Technologies -> "Set ISATAP State" to "Enabled: Disabled State".

b
The Teredo IPv6 transition technology must be disabled.
CM-7 - Medium - CCI-000382 - V-26578 - SV-52967r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000382
Version
WN12-CC-000010
Vuln IDs
  • V-26578
Rule IDs
  • SV-52967r1_rule
IPv6 transition technologies, which tunnel packets through other protocols, do not provide visibility.ECSC-1
Checks: C-47273r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\TCPIP\v6Transition\ Value Name: Teredo_State Type: REG_SZ Value: Disabled

Fix: F-45893r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Network -> TCPIP Settings -> IPv6 Transition Technologies -> "Set Teredo State" to "Enabled: Disabled State".

b
The Application event log must be configured to a minimum size requirement.
AU-4 - Medium - CCI-001849 - V-26579 - SV-52966r1_rule
RMF Control
AU-4
Severity
M
CCI
CCI-001849
Version
WN12-CC-000084
Vuln IDs
  • V-26579
Rule IDs
  • SV-52966r1_rule
Inadequate log size will cause the log to fill up quickly and require frequent clearing by administrative personnel.ECRR-1
Checks: C-47272r3_chk

If the system is configured to write events directly to an audit server, this is NA. If the following registry value does not exist or is not configured to at least the value specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\EventLog\Application\ Value Name: MaxSize Type: REG_DWORD Value: 32768

Fix: F-45892r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Event Log Service -> Application -> "Specify the maximum log size (KB)" to at minimum "Enabled:32768".

b
The Security event log must be configured to a minimum size requirement.
AU-4 - Medium - CCI-001849 - V-26580 - SV-52965r1_rule
RMF Control
AU-4
Severity
M
CCI
CCI-001849
Version
WN12-CC-000085
Vuln IDs
  • V-26580
Rule IDs
  • SV-52965r1_rule
Inadequate log size will cause the log to fill up quickly and require frequent clearing by administrative personnel.ECRR-1
Checks: C-47271r3_chk

If the system is configured to write events directly to an audit server, this is NA. If the following registry value does not exist or is not configured to at least the value specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\EventLog\Security\ Value Name: MaxSize Type: REG_DWORD Value: 196608

Fix: F-45891r1_fix

If the system is not configured to write directly to an audit server, configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Event Log Service -> Security -> "Specify the maximum log size (KB)" to at minimum "Enabled:196608".

b
The Setup event log must be configured to a minimum size requirement.
AU-4 - Medium - CCI-001849 - V-26581 - SV-52964r1_rule
RMF Control
AU-4
Severity
M
CCI
CCI-001849
Version
WN12-CC-000086
Vuln IDs
  • V-26581
Rule IDs
  • SV-52964r1_rule
Inadequate log size will cause the log to fill up quickly and require frequent clearing by administrative personnel.ECRR-1
Checks: C-47270r2_chk

If the system is configured to write events directly to an audit server, this is NA. If the following registry value does not exist or is not configured to at least the value specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\EventLog\Setup\ Value Name: MaxSize Type: REG_DWORD Value: 32768

Fix: F-45890r1_fix

If the system is not configured to write directly to an audit server, configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Event Log Service -> Setup -> "Specify the maximum log size (KB)" to at minimum "Enabled:32768".

b
The System event log must be configured to a minimum size requirement.
AU-4 - Medium - CCI-001849 - V-26582 - SV-52963r1_rule
RMF Control
AU-4
Severity
M
CCI
CCI-001849
Version
WN12-CC-000087
Vuln IDs
  • V-26582
Rule IDs
  • SV-52963r1_rule
Inadequate log size will cause the log to fill up quickly and require frequent clearing by administrative personnel.ECRR-1
Checks: C-47269r2_chk

If the system is configured to write events directly to an audit server, this is NA. If the following registry value does not exist or is not configured to at least the value specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\EventLog\System\ Value Name: MaxSize Type: REG_DWORD Value: 32768

Fix: F-45889r1_fix

If the system is not configured to write directly to an audit server, configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Event Log Service -> System -> "Specify the maximum log size (KB)" to at minimum "Enabled:32768".

b
The Fax service must be disabled if installed.
CM-7 - Medium - CCI-000381 - V-26600 - SV-52236r2_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-SV-000100
Vuln IDs
  • V-26600
Rule IDs
  • SV-52236r2_rule
Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption.ECSC-1
Checks: C-46974r1_chk

Verify the Fax (fax) service is not installed or is disabled. Run "Services.msc". If the following is installed and not disabled, this is a finding: Fax (fax)

Fix: F-45251r1_fix

Remove or disable the Fax (fax) service.

b
The Microsoft FTP service must not be installed.
CM-7 - Medium - CCI-000382 - V-26602 - SV-52237r2_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000382
Version
WN12-SV-000101
Vuln IDs
  • V-26602
Rule IDs
  • SV-52237r2_rule
Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption.ECSC-1
Checks: C-46975r1_chk

Verify the Microsoft FTP (msftpsvc) service is not installed or is disabled. Run "Services.msc". If the following is installed and not disabled, this is a finding: Microsoft FTP Service (msftpsvc)

Fix: F-45252r1_fix

Remove or disable the Microsoft FTP Service (msftpsvc) service.

b
The Peer Networking Identity Manager service must be disabled if installed.
CM-7 - Medium - CCI-000381 - V-26604 - SV-52238r2_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-SV-000103
Vuln IDs
  • V-26604
Rule IDs
  • SV-52238r2_rule
Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption.ECSC-1
Checks: C-46976r1_chk

Verify the Peer Network Identity Manager (p2pimsvc) service is not installed or is disabled. Run "Services.msc". If the following is installed and not disabled, this is a finding: Peer Networking Identity Manager (p2pimsvc)

Fix: F-45253r1_fix

Remove or disable the Peer Networking Identity Manager (p2pimsvc) service.

b
The Simple TCP/IP Services service must be disabled if installed.
CM-7 - Medium - CCI-000381 - V-26605 - SV-52239r2_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-SV-000104
Vuln IDs
  • V-26605
Rule IDs
  • SV-52239r2_rule
Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption.ECSC-1
Checks: C-46977r1_chk

Verify the Simple TCP/IP (simptcp) service is not installed or is disabled. Run "Services.msc". If the following is installed and not disabled, this is a finding: Simple TCP/IP Services (simptcp)

Fix: F-45254r1_fix

Remove or disable the Simple TCP/IP Services (simptcp) service.

b
The Telnet service must be disabled if installed.
CM-7 - Medium - CCI-000382 - V-26606 - SV-52240r2_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000382
Version
WN12-SV-000105
Vuln IDs
  • V-26606
Rule IDs
  • SV-52240r2_rule
Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption.ECSC-1
Checks: C-46978r1_chk

Verify the Telnet (tlntsvr) service is not installed or is disabled. Run "Services.msc". If the following is installed and not disabled, this is a finding: Telnet (tlntsvr)

Fix: F-45255r1_fix

Remove or disable the Telnet (tlntsvr) service.

a
Windows must be prevented from sending an error report when a device driver requests additional software during installation.
CM-7 - Low - CCI-000381 - V-28504 - SV-52962r1_rule
RMF Control
CM-7
Severity
L
CCI
CCI-000381
Version
WN12-CC-000023
Vuln IDs
  • V-28504
Rule IDs
  • SV-52962r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system. This setting will prevent Windows from sending an error report to Microsoft when a device driver requests additional software during installation.ECSC-1
Checks: C-47268r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\DeviceInstall\Settings\ Value Name: DisableSendRequestAdditionalSoftwareToWER Type: REG_DWORD Value: 1

Fix: F-45888r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Device Installation -> "Prevent Windows from sending an error report when a device driver requests additional software during installation" to "Enabled".

b
The DoD root certificate must be installed into the Trusted Root Store.
IA-5 - Medium - CCI-000185 - V-32272 - SV-52961r2_rule
RMF Control
IA-5
Severity
M
CCI
CCI-000185
Version
WN12-PK-000001
Vuln IDs
  • V-32272
Rule IDs
  • SV-52961r2_rule
To ensure secure DoD websites and DoD signed code are properly validated, the system must trust the DoD Root CA 2. The DoD root certificate will ensure that the trust chain is established for server certificates issued from the DoD CA.IATS-1, IATS-2
Checks: C-49221r1_chk

Verify the DoD Root CA 2 certificate is installed as a Trusted Root Certification Authority using the Certificates MMC snap-in: Run "MMC". Select "File", "Add/Remove Snap-in". Select "Certificates", click "Add". Select "Computer account", click "Next". Select "Local computer: (the computer this console is running on)", click "Finish". Click "OK". Expand "Certificates" and navigate to "Trusted Root Certification Authorities\Certificates". Search for "DoD Root CA 2" under "Issued To" in the center pane. If there is no entry for "DoD Root CA 2", this is a finding. Select DoD Root CA 2. Right click and select "Open". Select the "Details" Tab. Scroll to the bottom and select "Thumbprint Algorithm". Verify the Value is "sha1". If the value for "Thumbprint Algorithm" is not "sha1", this is a finding. Next select "Thumbprint". If the value for the "Thumbprint" field is not "8C:94:1B:34:EA:1E:A6:ED:9A:E2:BC:54:CF:68:72:52:B4:C9:B5:61", this is a finding. The thumbprint referenced applies to NIPRNet, see PKE documentation for other networks.

Fix: F-45887r1_fix

Install the DoD Root CA 2 certificate. The InstallRoot tool is available on IASE at http://iase.disa.mil/pki-pke/function_pages/tools.html.

b
The DoD Interoperability Root CA 1 to DoD Root CA 2 cross-certificate must be installed into the Untrusted Certificates Store.
IA-5 - Medium - CCI-000185 - V-32274 - SV-52957r2_rule
RMF Control
IA-5
Severity
M
CCI
CCI-000185
Version
WN12-PK-000003
Vuln IDs
  • V-32274
Rule IDs
  • SV-52957r2_rule
To ensure users do not experience denial of service on NIPRNet when performing certificate-based authentication to DoD websites due to the system chaining to a root other than DoD Root CA 2, the DoD Interoperability Root CA 1 to DoD Root CA 2 cross-certificate must be installed in the Untrusted Certificate Store. This requirement only applies to NIPRNet systems.IATS-2, IATS-1
Checks: C-49171r1_chk

Verify the DoD Root CA 2 certificate issued by DoD Interoperability Root CA 1 is installed on NIPRNet systems as an Untrusted Certificate using the Certificates MMC snap-in: Run "MMC". Select "File", "Add/Remove Snap-in". Select "Certificates", click "Add". Select "Computer account", click "Next". Select "Local computer: (the computer this console is running on)", click "Finish". Click "OK". Expand "Certificates" and navigate to "Untrusted Certificates\Certificates". Search in the center pane for "DoD Root CA 2" under "Issued To" with "DoD Interoperability Root CA 1" as "Issued By". If there is no entry for this certificate, this is a finding. Select the certificate. Right click and select "Open". Select the "Details" Tab. Scroll to the bottom and select "Thumbprint Algorithm". Verify the Value is "sha1". If the value for "Thumbprint Algorithm" is not "sha1", this is a finding. Next select "Thumbprint". If the value for the "Thumbprint" field is not "99:c4:94:ec:e4:fc:09:3e:ee:13:c4:d6:5b:1b:1e:01:b9:b5:d4:34", this is a finding.

Fix: F-48597r1_fix

Install the DoD Interoperability Root CA 1 to DoD Root CA 2 cross-certificate on NIPRNet systems only. Administrators should run the Federal Bridge Certification Authority (FBCA) Cross-Certificate Removal Tool once as an administrator and once as the current user. The FBCA Cross-Certificate Remover tool and user guide is available on IASE at http://iase.disa.mil/pki-pke/function_pages/tools.html.

c
Standard user accounts must only have Read permissions to the Active Setup\Installed Components registry key.
AC-6 - High - CCI-002235 - V-32282 - SV-52956r1_rule
RMF Control
AC-6
Severity
H
CCI
CCI-002235
Version
WN12-RG-000002
Vuln IDs
  • V-32282
Rule IDs
  • SV-52956r1_rule
Permissions on the Active Setup\Installed Components registry key must only allow privileged accounts to add or change registry values. If standard user accounts have this capability, there is a potential for programs to run with elevated privileges when a privileged user logs on to the system. ECCD-1, ECCD-2
Checks: C-47262r1_chk

Navigate to the following registry key and review the assigned permissions: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Active Setup\Installed Components On 64-bit systems, also review the permissions assigned to the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Active Setup\Installed Components Verify standard user accounts and groups only have Read permissions to this registry key. If any standard user accounts or groups have greater permissions, this is a finding. The default permissions satisfy this requirement.

Fix: F-45882r1_fix

Ensure only Read permissions are assigned to standard user accounts and groups for the following registry keys. The default configuration satisfies this requirement. All systems: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Active Setup\Installed Components 64-bit systems: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Active Setup\Installed Components

c
The Windows Installer Always install with elevated privileges option must be disabled.
CM-11 - High - CCI-001812 - V-34974 - SV-52954r1_rule
RMF Control
CM-11
Severity
H
CCI
CCI-001812
Version
WN12-CC-000116
Vuln IDs
  • V-34974
Rule IDs
  • SV-52954r1_rule
Standard user accounts must not be granted elevated privileges. Enabling Windows Installer to elevate privileges when installing applications can allow malicious persons and applications to gain full control of a system.ECLP-1
Checks: C-47260r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\Installer\ Value Name: AlwaysInstallElevated Type: REG_DWORD Value: 0

Fix: F-45880r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Installer -> "Always install with elevated privileges" to "Disabled".

b
Local administrator accounts must have their privileged token filtered to prevent elevated privileges from being used over the network on domain systems.
SC-3 - Medium - CCI-001084 - V-36439 - SV-51590r2_rule
RMF Control
SC-3
Severity
M
CCI
CCI-001084
Version
WN12-RG-000003-MS
Vuln IDs
  • V-36439
Rule IDs
  • SV-51590r2_rule
A compromised local administrator account can provide means for an attacker to move laterally between domain systems. With User Account Control enabled, filtering the privileged token for local administrator accounts will prevent the elevated privileges of these accounts from being used over the network.ECLP-1
Checks: C-46849r2_chk

If the system is not a member of a domain, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System Value Name: LocalAccountTokenFilterPolicy Type: REG_DWORD Value: 0 This setting may cause issues with some network scanning tools if local administrative accounts are used remotely. Scans should use domain accounts where possible. If a local administrative account must be used, temporarily enabling the privileged token by configuring the registry value to 1 may be required.

Fix: F-44715r2_fix

Configure the following registry value: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System Value Name: LocalAccountTokenFilterPolicy Type: REG_DWORD Value: 0

c
Policy must require that administrative accounts not be used with applications that access the Internet, such as web browsers, or with potential Internet sources, such as email.
CM-6 - High - CCI-000366 - V-36451 - SV-51578r1_rule
RMF Control
CM-6
Severity
H
CCI
CCI-000366
Version
WN12-00-000008
Vuln IDs
  • V-36451
Rule IDs
  • SV-51578r1_rule
Using applications that access the Internet or have potential Internet sources using administrative privileges exposes a system to compromise. If a flaw in an application is exploited while running as a privileged user, the entire system could be compromised. Web browsers and email are common attack vectors for introducing malicious code and must not be run with an administrative account. Since administrative accounts may generally change or work around technical restrictions for running a web browser or other applications, it is essential that policy requires administrative accounts to not access the Internet or use applications, such as email. The policy should define specific exceptions for local service administration. These exceptions may include HTTP(S)-based tools that are used for the administration of the local system, services, or attached devices.ECSC-1
Checks: C-46841r2_chk

Determine whether site policy prohibits the use of applications that access the Internet, such as web browsers, or with potential Internet sources, such as email, by administrative accounts, except as necessary for local service administration. If it does not, this is a finding.

Fix: F-44707r2_fix

Establish a site policy to prohibit the use of applications that access the Internet, such as web browsers, or with potential Internet sources, such as email, by administrative accounts. Ensure the policy is enforced.

b
A screen saver must be enabled on the system.
AC-11 - Medium - CCI-000060 - V-36656 - SV-51758r1_rule
RMF Control
AC-11
Severity
M
CCI
CCI-000060
Version
WN12-UC-000001
Vuln IDs
  • V-36656
Rule IDs
  • SV-51758r1_rule
Unattended systems are susceptible to unauthorized use and must be locked when unattended. Enabling a password-protected screen saver to engage after a specified period of time helps protects critical and sensitive data from exposure to unauthorized personnel with physical access to the computer.PESL-1
Checks: C-46887r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_CURRENT_USER Registry Path: \Software\Policies\Microsoft\Windows\Control Panel\Desktop\ Value Name: ScreenSaveActive Type: REG_SZ Value: 1 Applications requiring continuous, real-time screen display (e.g., network management products) require the following and must be documented with the IAO: -The logon session does not have administrator rights. -The display station (e.g., keyboard, monitor, etc.) is located in a controlled access area.

Fix: F-44833r2_fix

Configure the policy value for User Configuration -> Administrative Templates -> Control Panel -> Personalization -> "Enable screen saver" to "Enabled".

b
The screen saver must be password protected.
AC-11 - Medium - CCI-000056 - V-36657 - SV-51760r1_rule
RMF Control
AC-11
Severity
M
CCI
CCI-000056
Version
WN12-UC-000003
Vuln IDs
  • V-36657
Rule IDs
  • SV-51760r1_rule
Unattended systems are susceptible to unauthorized use and must be locked when unattended. Enabling a password-protected screen saver to engage after a specified period of time helps protects critical and sensitive data from exposure to unauthorized personnel with physical access to the computer.PESL-1
Checks: C-46889r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_CURRENT_USER Registry Path: \Software\Policies\Microsoft\Windows\Control Panel\Desktop\ Value Name: ScreenSaverIsSecure Type: REG_SZ Value: 1

Fix: F-44835r1_fix

Configure the policy value for User Configuration -> Administrative Templates -> Control Panel -> Personalization -> "Password protect the screen saver" to "Enabled".

b
Users with administrative privilege must be documented.
CM-6 - Medium - CCI-000366 - V-36658 - SV-51575r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-00-000004
Vuln IDs
  • V-36658
Rule IDs
  • SV-51575r1_rule
Administrative accounts may perform any action on a system. Users with administrative accounts must be documented to ensure those with this level of access are clearly identified.ECLP-1
Checks: C-46838r1_chk

Review the necessary documentation that identifies the members of the Administrators group. If a list of all users belonging to the Administrators group is not maintained with the IAO, this is a finding.

Fix: F-44704r1_fix

Create the necessary documentation that identifies the members of the Administrators group.

c
Users with Administrative privileges must have separate accounts for administrative duties and normal operational tasks.
CM-6 - High - CCI-000366 - V-36659 - SV-51576r1_rule
RMF Control
CM-6
Severity
H
CCI
CCI-000366
Version
WN12-00-000005
Vuln IDs
  • V-36659
Rule IDs
  • SV-51576r1_rule
Using a privileged account to perform routine functions makes the computer vulnerable to malicious software inadvertently introduced during a session that has been granted full privileges.ECLP-1
Checks: C-46839r2_chk

Verify each user with administrative privileges has been assigned a unique administrative account separate from their standard user account. If users with administrative privileges do not have separate accounts for administrative functions and standard user functions, this is a finding.

Fix: F-44705r1_fix

Ensure each user with administrative privileges has a separate account for user duties and one for privileged duties.

b
Policy must require application account passwords be at least 15 characters in length.
IA-5 - Medium - CCI-000205 - V-36661 - SV-51579r1_rule
RMF Control
IA-5
Severity
M
CCI
CCI-000205
Version
WN12-00-000010
Vuln IDs
  • V-36661
Rule IDs
  • SV-51579r1_rule
Application/service account passwords must be of sufficient length to prevent being easily cracked. Application/service accounts that are manually managed must have passwords at least 15 characters in length.IAIA-1
Checks: C-46842r2_chk

Verify the site has a policy to ensure passwords for manually managed application/service accounts are at least 15 characters in length. If such a policy does not exist or has not been implemented, this is a finding.

Fix: F-44708r2_fix

Establish a site policy that requires application/service account passwords that are manually managed to be at least 15 characters in length. Ensure the policy is enforced.

b
Application account passwords must be changed at least annually or when a system administrator with knowledge of the password leaves the organization.
AC-2 - Medium - CCI-002142 - V-36662 - SV-51580r1_rule
RMF Control
AC-2
Severity
M
CCI
CCI-002142
Version
WN12-00-000011
Vuln IDs
  • V-36662
Rule IDs
  • SV-51580r1_rule
Setting application accounts to expire may cause applications to stop functioning. However, not changing them on a regular basis exposes them to attack.IAIA-1
Checks: C-46843r2_chk

Determine if any system administrators with knowledge of application account passwords have left the organization within the last year. Run the DUMPSEC utility. Select "Dump Users as Table" from the "Report" menu. Select the following fields, and click "Add" for each entry: UserName SID PwsdLastSetTime If any application accounts listed that are manually managed and have a date older than one year in the "PwsdLastSetTime" column, this is a finding. If any system administrators with knowledge of application account passwords have left the organization within the last year and the "PwsdLastSetTime" field reflects that application account passwords were not changed at that time, this is a finding.

Fix: F-44709r2_fix

Change application/service account passwords that are manually managed and entered by a system administrator at least annually or whenever an administrator with knowledge of the password leaves the organization.

b
System BIOS or system controllers must have administrator accounts/passwords configured.
CM-6 - Medium - CCI-000366 - V-36663 - SV-51573r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-00-000002-01
Vuln IDs
  • V-36663
Rule IDs
  • SV-51573r1_rule
A system's BIOS or system controller handles the initial startup of a system, and its configuration must be protected from unauthorized modification. When the BIOS or system controller supports the creation of user accounts or passwords, such protections must be used and accounts/passwords only assigned to system administrators. Failure to protect BIOS or system controller settings could result in Denial of Service or compromise of the system resulting from unauthorized configuration changes.ECLP-1
Checks: C-46836r3_chk

Verify a supervisor or administrator password is set in the BIOS or system controller. If a password is not configured, this is a finding.

Fix: F-44702r3_fix

Access the system's BIOS or system controller. Configure a supervisor/administrator password.

c
The system must not use removable media as the boot loader.
CM-6 - High - CCI-000366 - V-36664 - SV-51574r2_rule
RMF Control
CM-6
Severity
H
CCI
CCI-000366
Version
WN12-00-000003
Vuln IDs
  • V-36664
Rule IDs
  • SV-51574r2_rule
Malicious users with removable boot media can gain access to a system configured to use removable media as the boot loader.ECSC-1
Checks: C-46837r2_chk

Verify whether the system BIOS or controller allows removable media for the boot loader. If it does, this is a finding.

Fix: F-44703r1_fix

Configure the system to use a boot loader installed on fixed media.

b
Policy must require that system administrators (SAs) be trained for the operating systems used by systems under their control.
CM-6 - Medium - CCI-000366 - V-36666 - SV-51577r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-00-000006
Vuln IDs
  • V-36666
Rule IDs
  • SV-51577r1_rule
If SAs are assigned to systems running operating systems for which they have no training, these systems are at additional risk of unintentional misconfiguration that may result in vulnerabilities or decreased availability of the system.ECLP-1
Checks: C-46840r2_chk

Determine whether the site has a policy that requires SAs be trained for all operating systems running on systems under their control. If the site does not have a policy requiring SAs be trained for all operating systems under their control, this is a finding.

Fix: F-44706r1_fix

Establish site policy that requires SAs be trained for all operating systems running on systems under their control.

b
The system must be configured to audit Object Access - Removable Storage failures.
AU-12 - Medium - CCI-000172 - V-36667 - SV-51604r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000082
Vuln IDs
  • V-36667
Rule IDs
  • SV-51604r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Removable Storage auditing under Object Access records events related to access attempts on file system objects on removable storage devices.ECAR-3, ECAR-2
Checks: C-46854r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*" Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Object Access -&gt; Removable Storage - Failure

Fix: F-44725r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Object Access -> "Audit Removable Storage" with "Failure" selected.

b
The system must be configured to audit Object Access - Removable Storage successes.
AU-12 - Medium - CCI-000172 - V-36668 - SV-51601r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000081
Vuln IDs
  • V-36668
Rule IDs
  • SV-51601r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Removable Storage auditing under Object Access records events related to access attempts on file system objects on removable storage devices.ECAR-3, ECAR-2
Checks: C-46853r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*" Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Object Access -&gt; Removable Storage - Success

Fix: F-44723r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Object Access -> "Audit Removable Storage" with "Success" selected.

b
The system must be configured to audit Object Access - Handle Manipulation failures.
AU-12 - Medium - CCI-000172 - V-36669 - SV-51599r1_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000074
Vuln IDs
  • V-36669
Rule IDs
  • SV-51599r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Handle Manipulation auditing under Object Access is needed to correctly enable the recording of events related to the access and changing of files and directories. Auditing must also be enabled on the specific file system objects to be audited.ECAR-3, ECAR-2
Checks: C-46852r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Object Access -&gt; Handle Manipulation - Failure

Fix: F-44720r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Object Access -> "Audit Handle Manipulation" with "Failure" selected.

b
Audit data must be reviewed on a regular basis.
CM-6 - Medium - CCI-000366 - V-36670 - SV-51561r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-AU-000200
Vuln IDs
  • V-36670
Rule IDs
  • SV-51561r1_rule
To be of value, audit logs from critical systems must be reviewed on a regular basis. Critical systems should be reviewed on a daily basis to identify security breaches and potential weaknesses in the security structure. This can be done with the use of monitoring software or other utilities for this purpose.ECAT-2, ECAT-1
Checks: C-46830r2_chk

Determine whether audit logs are reviewed on a predetermined schedule. If audit logs are not reviewed on a regular basis, this is a finding.

Fix: F-44692r2_fix

Review audit logs on a predetermined scheduled.

b
Audit data must be retained for at least one year.
CM-6 - Medium - CCI-000366 - V-36671 - SV-51563r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-AU-000201
Vuln IDs
  • V-36671
Rule IDs
  • SV-51563r1_rule
Audit records are essential for investigating system activity after the fact. Retention periods for audit data are determined based on the sensitivity of the data handled by the system.ECRR-1
Checks: C-46831r2_chk

Determine whether audit data is retained for at least one year. If the audit data is not retained for at least a year, this is a finding.

Fix: F-44693r2_fix

Ensure the audit data is retained for at least a year.

b
Audit records must be backed up on an organization defined frequency onto a different system or media than the system being audited.
AU-9 - Medium - CCI-001348 - V-36672 - SV-51566r1_rule
RMF Control
AU-9
Severity
M
CCI
CCI-001348
Version
WN12-AU-000203
Vuln IDs
  • V-36672
Rule IDs
  • SV-51566r1_rule
Protection of log data includes assuring the log data is not accidentally lost or deleted. Backing up audit records to a different system or onto separate media than the system being audited on an organization defined frequency helps to assure in the event of a catastrophic system failure, the audit records will be retained.ECRR-1
Checks: C-46832r1_chk

Determine if a process to backup log data on an organization defined frequency to a different system or media than the system being audited has been implemented. If it has not, this is a finding.

Fix: F-44696r1_fix

Establish and implement a process for backing up log data on an organization defined frequency to another system or media other than the system being audited.

a
IP stateless autoconfiguration limits state must be enabled.
CM-6 - Low - CCI-000366 - V-36673 - SV-51605r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-CC-000011
Vuln IDs
  • V-36673
Rule IDs
  • SV-51605r1_rule
IP stateless autoconfiguration could configure routes that circumvent preferred routes if not limited.ECSC-1
Checks: C-46855r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Services\Tcpip\Parameters\ Value Name: EnableIPAutoConfigurationLimits Type: REG_DWORD Value: 1

Fix: F-44726r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Network -> TCPIP Settings -> Parameters -> "Set IP Stateless Autoconfiguration Limits State" to "Enabled".

a
Optional component installation and component repair must be prevented from using Windows Update.
CM-11 - Low - CCI-001812 - V-36677 - SV-51606r1_rule
RMF Control
CM-11
Severity
L
CCI
CCI-001812
Version
WN12-CC-000018
Vuln IDs
  • V-36677
Rule IDs
  • SV-51606r1_rule
Uncontrolled system updates can introduce issues to a system. Obtaining update components from an outside source may also potentially provide sensitive information outside of the enterprise. Optional component installation or repair must be obtained from an internal source.ECSC-1
Checks: C-46856r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\Servicing\ Value Name: UseWindowsUpdate Type: REG_DWORD Value: 2

Fix: F-44727r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> "Specify settings for optional component installation and component repair" to "Enabled" and with "Never attempt to download payload from Windows Update" selected.

a
Device driver updates must only search managed servers, not Windows Update.
CM-11 - Low - CCI-001812 - V-36678 - SV-51607r1_rule
RMF Control
CM-11
Severity
L
CCI
CCI-001812
Version
WN12-CC-000025
Vuln IDs
  • V-36678
Rule IDs
  • SV-51607r1_rule
Uncontrolled system updates can introduce issues to a system. Obtaining update components from an outside source may also potentially provide sensitive information outside of the enterprise. Device driver updates must be obtained from an internal source.ECSC-1
Checks: C-46858r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\DriverSearching\ Value Name: DriverServerSelection Type: REG_DWORD Value: 1

Fix: F-44728r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Device Installation -> "Specify the search server for device driver updates" to "Enabled" with "Search Managed Server" selected.

b
Early Launch Antimalware, Boot-Start Driver Initialization Policy must be enabled and configured to only Good and Unknown.
CM-6 - Medium - CCI-000366 - V-36679 - SV-51608r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-CC-000027
Vuln IDs
  • V-36679
Rule IDs
  • SV-51608r1_rule
Compromised boot drivers can introduce malware prior to some protection mechanisms that load after initialization. The Early Launch Antimalware driver can limit allowed drivers based on classifications determined by the malware protection application. At a minimum, drivers determined to be bad must not be allowed.ECVP-1
Checks: C-46859r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \System\CurrentControlSet\Policies\EarlyLaunch\ Value Name: DriverLoadPolicy Type: REG_DWORD Value: 1

Fix: F-44729r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Early Launch Antimalware -> "Boot-Start Driver Initialization Policy" to "Enabled" with "Good and Unknown" selected.

b
Access to the Windows Store must be turned off.
CM-6 - Medium - CCI-000366 - V-36680 - SV-51609r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-CC-000030
Vuln IDs
  • V-36680
Rule IDs
  • SV-51609r1_rule
Uncontrolled installation of applications can introduce various issues, including system instability, and allow access to sensitive information. Installation of applications must be controlled by the enterprise. Turning off access to the Windows Store will limit access to publicly available applications.ECSC-1
Checks: C-46860r2_chk

The Windows Store is not installed by default. If the \Windows\WindowsStore directory does not exist, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\Explorer\ Value Name: NoUseStoreOpenWith Type: REG_DWORD Value: 1

Fix: F-44730r2_fix

If the \Windows\WindowsStore directory exists, configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication settings -> "Turn off access to the Store" to "Enabled".

b
Copying of user input methods to the system account for sign-in must be prevented.
CM-7 - Medium - CCI-000381 - V-36681 - SV-51610r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000048
Vuln IDs
  • V-36681
Rule IDs
  • SV-51610r1_rule
Allowing different input methods for sign-in could open different avenues of attack. User input methods must be restricted to those enabled for the system account at sign-in.ECSC-1
Checks: C-46861r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Control Panel\International\ Value Name: BlockUserInputMethodsForSignIn Type: REG_DWORD Value: 1

Fix: F-44731r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Locale Services -> "Disallow copying of user input methods to the system account for sign-in" to "Enabled".

b
Local users on domain-joined computers must not be enumerated.
CM-7 - Medium - CCI-000381 - V-36684 - SV-51611r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000051
Vuln IDs
  • V-36684
Rule IDs
  • SV-51611r1_rule
The username is one part of logon credentials that could be used to gain access to a system. Preventing the enumeration of users limits this information to authorized personnel.ECSC-1
Checks: C-46862r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\System\ Value Name: EnumerateLocalUsers Type: REG_DWORD Value: 0

Fix: F-44732r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Logon -> "Enumerate local users on domain-joined computers" to "Disabled".

b
App notifications on the lock screen must be turned off.
CM-7 - Medium - CCI-000381 - V-36687 - SV-51612r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000052
Vuln IDs
  • V-36687
Rule IDs
  • SV-51612r1_rule
App notifications that are displayed on the lock screen could display sensitive information to unauthorized personnel. Turning off this feature will limit access to the information to a logged on user.ECSC-1
Checks: C-46863r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\System\ Value Name: DisableLockScreenAppNotifications Type: REG_DWORD Value: 1

Fix: F-44733r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Logon -> "Turn off app notifications on the lock screen" to "Enabled".

a
The display must turn off after 20 minutes of inactivity when the system is running on battery.
CM-6 - Low - CCI-000366 - V-36690 - SV-51735r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-CC-000056
Vuln IDs
  • V-36690
Rule IDs
  • SV-51735r1_rule
Turning off an inactive display supports energy saving initiatives. It may also extend availability on systems running on a battery.ECSC-1
Checks: C-46864r2_chk

If an organization has a documented operational requirement to keep displays active, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Power\PowerSettings\3C0BC021-C8A8-4E07-A973-6B14CBCB2B7E\ Value Name: DCSettingIndex Type: REG_DWORD Value: 0x000004b0 (1200) or less

Fix: F-44810r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Power Management -> Video and Display Settings -> "Turn off the display (on battery)" to "Enabled" with "1200" seconds or less.

a
The display must turn off after 20 minutes of inactivity when the system is plugged in.
CM-6 - Low - CCI-000366 - V-36691 - SV-51736r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-CC-000057
Vuln IDs
  • V-36691
Rule IDs
  • SV-51736r1_rule
Turning off an inactive display supports energy saving initiatives.ECSC-1
Checks: C-46865r2_chk

If an organization has a documented operational requirement to keep displays active, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Power\PowerSettings\3C0BC021-C8A8-4E07-A973-6B14CBCB2B7E\ Value Name: ACSettingIndex Type: REG_DWORD Value: 0x000004b0 (1200) or less

Fix: F-44811r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Power Management -> Video and Display Settings -> "Turn off the display (plugged in)" to "Enabled" with "1200" seconds or less.

a
The detection of compatibility issues for applications and drivers must be turned off.
CM-7 - Low - CCI-000381 - V-36696 - SV-51737r1_rule
RMF Control
CM-7
Severity
L
CCI
CCI-000381
Version
WN12-CC-000065
Vuln IDs
  • V-36696
Rule IDs
  • SV-51737r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and uncontrolled updates to the system.ECSC-1
Checks: C-46866r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\AppCompat\ Value Name: DisablePcaUI Type: REG_DWORD Value: 0

Fix: F-44812r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Troubleshooting and Diagnostics -> Application Compatibility Diagnostics -> "Detect compatibility issues for applications and drivers" to "Disabled".

a
Trusted app installation must be enabled to allow for signed enterprise line of business apps.
CM-6 - Low - CCI-000366 - V-36697 - SV-51738r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-CC-000070
Vuln IDs
  • V-36697
Rule IDs
  • SV-51738r1_rule
Enabling trusted app installation allows for enterprise line of business Windows 8 type apps. A trusted app package is one that is signed with a certificate chain that can be successfully validated in the enterprise. Configuring this ensures enterprise line of business apps are accessible.ECSC-1
Checks: C-46867r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\Appx\ Value Name: AllowAllTrustedApps Type: REG_DWORD Value: 1

Fix: F-44813r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> App Package Deployment -> "Allow all trusted apps to install" to "Enabled".

b
The use of biometrics must be disabled.
CM-7 - Medium - CCI-000381 - V-36698 - SV-51739r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000075
Vuln IDs
  • V-36698
Rule IDs
  • SV-51739r1_rule
Allowing biometrics may bypass required authentication methods. Biometrics may only be used as an additional authentication factor where an enhanced strength of identity credential is necessary or desirable. Additional factors must be met per DoD policy.IAIA-1
Checks: C-46868r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Biometrics\ Value Name: Enabled Type: REG_DWORD Value: 0

Fix: F-44814r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Biometrics -> "Allow the use of biometrics" to "Disabled".

b
The password reveal button must not be displayed.
IA-6 - Medium - CCI-000206 - V-36700 - SV-51740r1_rule
RMF Control
IA-6
Severity
M
CCI
CCI-000206
Version
WN12-CC-000076
Vuln IDs
  • V-36700
Rule IDs
  • SV-51740r1_rule
Visible passwords may be seen by nearby persons, compromising them. The password reveal button can be used to display an entered password and must not be allowed.IAIA-1
Checks: C-46869r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\CredUI\ Value Name: DisablePasswordReveal Type: REG_DWORD Value: 1

Fix: F-44815r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Credential User Interface -> "Do not display the password reveal button" to "Enabled".

b
The Enhanced Mitigation Experience Toolkit (EMET) system-wide Address Space Layout Randomization (ASLR) must be enabled and configured to Application Opt In.
SI-16 - Medium - CCI-002824 - V-36701 - SV-51741r3_rule
RMF Control
SI-16
Severity
M
CCI
CCI-002824
Version
WN12-CC-000078
Vuln IDs
  • V-36701
Rule IDs
  • SV-51741r3_rule
Attackers are constantly looking for vulnerabilities in systems and applications. The Enhanced Mitigation Experience Toolkit can enable several mechanisms, such as Data Execution Prevention (DEP), Address Space Layout Randomization (ASLR), and Structured Exception Handler Overwrite Protection (SEHOP) on the system and applications, adding additional levels of protection.ECVP-1
Checks: C-46870r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\EMET\SysSettings\ Value Name: ASLR Type: REG_DWORD Value: 3

Fix: F-44816r2_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> EMET -> "System ASLR" to "Enabled" with "Application Opt-In" selected. The Enhanced Mitigation Experience Toolkit must be installed on the system and the administrative template files added to make this setting available.

b
The Enhanced Mitigation Experience Toolkit (EMET) Default Protections for Internet Explorer must be enabled.
SI-16 - Medium - CCI-002824 - V-36702 - SV-51742r3_rule
RMF Control
SI-16
Severity
M
CCI
CCI-002824
Version
WN12-CC-000079
Vuln IDs
  • V-36702
Rule IDs
  • SV-51742r3_rule
Attackers are constantly looking for vulnerabilities in systems and applications. The Enhanced Mitigation Experience Toolkit can enable several mechanisms, such as Data Execution Prevention (DEP), Address Space Layout Randomization (ASLR), and Structured Exception Handler Overwrite Protection (SEHOP) on the system and applications, adding additional levels of protection.ECVP-1
Checks: C-46871r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\EMET\Defaults\ Value Name: IE Type: REG_SZ Value: *\Internet Explorer\iexplore.exe

Fix: F-44817r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> EMET -> "Default Protections for Internet Explorer" to "Enabled". The Enhanced Mitigation Experience Toolkit must be installed on the system and the administrative template files added to make this setting available.

b
The Enhanced Mitigation Experience Toolkit (EMET) Default Protections for Recommended Software must be enabled.
SI-16 - Medium - CCI-002824 - V-36703 - SV-51743r3_rule
RMF Control
SI-16
Severity
M
CCI
CCI-002824
Version
WN12-CC-000080
Vuln IDs
  • V-36703
Rule IDs
  • SV-51743r3_rule
Attackers are constantly looking for vulnerabilities in systems and applications. The Enhanced Mitigation Experience Toolkit can enable several mechanisms, such as Data Execution Prevention (DEP), Address Space Layout Randomization (ASLR), and Structured Exception Handler Overwrite Protection (SEHOP) on the system and applications, adding additional levels of protection.ECVP-1
Checks: C-49491r3_chk

If confirmed that none of the applications are installed on a system, this can be NA. If the following registry values do not exist or are not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\EMET\Defaults\ The Value Names will include the following: Access Acrobat AcrobatReader Excel InfoPath jre6_java jre6_javaw jre6_javaws jre7_java jre7_javaw jre7_javaws Lync Outlook Picture Manager PowerPoint PPTViewer Publisher Visio VisioViewer Word Wordpad

Fix: F-49732r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> EMET -> "Default Protections for Recommended Software" to "Enabled". The Enhanced Mitigation Experience Toolkit must be installed on the system and the administrative template files added to make this setting available.

b
The Enhanced Mitigation Experience Toolkit (EMET) Default Protections for Popular Software must be enabled.
SI-16 - Medium - CCI-002824 - V-36704 - SV-51744r3_rule
RMF Control
SI-16
Severity
M
CCI
CCI-002824
Version
WN12-CC-000081
Vuln IDs
  • V-36704
Rule IDs
  • SV-51744r3_rule
Attackers are constantly looking for vulnerabilities in systems and applications. The Enhanced Mitigation Experience Toolkit can enable several mechanisms, such as Data Execution Prevention (DEP), Address Space Layout Randomization (ASLR), and Structured Exception Handler Overwrite Protection (SEHOP) on the system and applications, adding additional levels of protection.ECVP-1
Checks: C-49497r2_chk

If confirmed that none of the applications are installed on a system, this can be NA. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\EMET\Defaults\ The Value Names will include the following: 7z 7zFM 7zGUI Chrome Firefox FirefoxPluginContainer FoxitReader GoogleTalk iTunes LiveWriter LyncCommunicator mIRC Opera PhotoGallery Photoshop Pidgin QuickTimePlayer RealConverter RealPlayer Safari SkyDrive Skype Thunderbird ThunderbirdPluginContainer UnRAR VLC Winamp WindowsLiveMail WindowsMediaPlayer WinRARConsole WinRARGUI Winzip Winzip64

Fix: F-49739r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> EMET -> "Default Protections for Popular Software" to "Enabled". The Enhanced Mitigation Experience Toolkit must be installed on the system and the administrative template files added to make this setting available.

b
The Enhanced Mitigation Experience Toolkit (EMET) system-wide Data Execution Prevention (DEP) must be enabled and configured to at least Application Opt Out.
SI-16 - Medium - CCI-002824 - V-36705 - SV-51745r3_rule
RMF Control
SI-16
Severity
M
CCI
CCI-002824
Version
WN12-CC-000082
Vuln IDs
  • V-36705
Rule IDs
  • SV-51745r3_rule
Attackers are constantly looking for vulnerabilities in systems and applications. The Enhanced Mitigation Experience Toolkit can enable several mechanisms, such as Data Execution Prevention (DEP), Address Space Layout Randomization (ASLR), and Structured Exception Handler Overwrite Protection (SEHOP) on the system and applications, adding additional levels of protection.ECVP-1
Checks: C-46874r3_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\EMET\SysSettings\ Value Name: DEP Type: REG_DWORD Value: 2 (Application Opt Out) Applications that do not function properly due to this setting, and are opted out, must be documented with the IAO.

Fix: F-44820r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> EMET -> "System DEP" to "Enabled" with at least "Application Opt-Out" selected. The Enhanced Mitigation Experience Toolkit must be installed on the system and the administrative template files added to make this setting available. Document applications that do not function properly due to this setting, and are opted out, with the IAO. Opted out exceptions can be configured with the following command: EMET_Conf --Set "application path\executable name" -DEP Alternately, configure exceptions in System Properties: Select "System" in Control Panel. Select "Advanced system settings". Click "Settings" in the "Performance" section. Select the "Data Execution Prevention" tab. Select "Turn on DEP for all programs and services except those I select:". Applications that are opted out are configured in the window below this selection.

b
The Enhanced Mitigation Experience Toolkit (EMET) system-wide Structured Exception Handler Overwrite Protection (SEHOP) must be configured to Application Opt Out.
SI-16 - Medium - CCI-002824 - V-36706 - SV-51746r3_rule
RMF Control
SI-16
Severity
M
CCI
CCI-002824
Version
WN12-CC-000083
Vuln IDs
  • V-36706
Rule IDs
  • SV-51746r3_rule
Attackers are constantly looking for vulnerabilities in systems and applications. The Enhanced Mitigation Experience Toolkit can enable several mechanisms, such as Data Execution Prevention (DEP), Address Space Layout Randomization (ASLR), and Structured Exception Handler Overwrite Protection (SEHOP) on the system and applications, adding additional levels of protection.ECVP-1
Checks: C-46875r3_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\EMET\SysSettings\ Value Name: SEHOP Type: REG_DWORD Value: 2 Applications that do not function properly due to this setting, and are opted out, must be documented with the IAO.

Fix: F-44821r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> EMET -> "System SEHOP" to "Enabled" with "Application Opt-Out" selected. The Enhanced Mitigation Experience Toolkit must be installed on the system and the administrative template files added to make this setting available. Document applications that do not function properly due to this setting, and are opted out, with the IAO. Opted out exceptions can be configured with the following command: EMET_Conf --Set "application path\executable name" -SEHOP

a
The Windows SmartScreen must be turned off.
CM-7 - Low - CCI-000381 - V-36707 - SV-51747r1_rule
RMF Control
CM-7
Severity
L
CCI
CCI-000381
Version
WN12-CC-000088
Vuln IDs
  • V-36707
Rule IDs
  • SV-51747r1_rule
Some features may send system information to the vendor. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise.ECSC-1
Checks: C-46876r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\System\ Value Name: EnableSmartScreen Type: REG_DWORD Value: 0

Fix: F-44822r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> File Explorer -> "Configure Windows SmartScreen" to "Enabled" with "Turn off SmartScreen" selected.

b
The location feature must be turned off.
CM-7 - Medium - CCI-000381 - V-36708 - SV-51748r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000095
Vuln IDs
  • V-36708
Rule IDs
  • SV-51748r1_rule
The location service on systems may allow sensitive data to be used by applications on the system. This should be turned off unless explicitly allowed for approved systems/applications.ECSC-1
Checks: C-46877r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\LocationAndSensors\ Value Name: DisableLocation Type: REG_DWORD Value: 1 (Enabled) If location services are approved for the system by the organization, this may be set to "Disabled" (0). This must be documented with the IAO.

Fix: F-44823r2_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Location and Sensors -> "Turn off location" to "Enabled". If location services are approved by the organization for a device, this must be documented.

b
Basic authentication for RSS feeds over HTTP must be turned off.
CM-7 - Medium - CCI-000381 - V-36709 - SV-51749r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000106
Vuln IDs
  • V-36709
Rule IDs
  • SV-51749r1_rule
Basic authentication uses plain text passwords that could be used to compromise a system.ECSC-1
Checks: C-46878r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Internet Explorer\Feeds\ Value Name: AllowBasicAuthInClear Type: REG_DWORD Value: 0

Fix: F-44824r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> RSS Feeds -> "Turn on Basic feed authentication over HTTP" to "Disabled".

a
Automatic download of updates from the Windows Store must be turned off.
CM-6 - Low - CCI-000366 - V-36710 - SV-51750r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-CC-000109
Vuln IDs
  • V-36710
Rule IDs
  • SV-51750r1_rule
Uncontrolled system updates can introduce issues to a system. Obtaining update components from an outside source may also potentially allow sensitive information outside of the enterprise. Application updates must be obtained from an internal source.ECSC-1
Checks: C-46879r2_chk

The Windows Store is not installed by default. If the \Windows\WindowsStore directory does not exist, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\WindowsStore\WindowsUpdate\ Value Name: AutoDownload Type: REG_DWORD Value: 2

Fix: F-44825r2_fix

If the \Windows\WindowsStore directory exists, configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Store -> "Turn off Automatic Download of updates" to "Enabled".

b
The Windows Store application must be turned off.
CM-6 - Medium - CCI-000366 - V-36711 - SV-51751r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-CC-000110
Vuln IDs
  • V-36711
Rule IDs
  • SV-51751r1_rule
Uncontrolled installation of applications can introduce various issues, including system instability, and provide access to sensitive information. Installation of applications must be controlled by the enterprise. Turning off access to the Windows Store will limit access to publicly available applications.ECSC-1
Checks: C-46880r2_chk

The Windows Store is not installed by default. If the \Windows\WindowsStore directory does not exist, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\WindowsStore\ Value Name: RemoveWindowsStore Type: REG_DWORD Value: 1

Fix: F-44826r2_fix

If the \Windows\WindowsStore directory exists, configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Store -> "Turn off the Store application" to "Enabled".

c
The Windows Remote Management (WinRM) client must not use Basic authentication.
MA-4 - High - CCI-000877 - V-36712 - SV-51752r1_rule
RMF Control
MA-4
Severity
H
CCI
CCI-000877
Version
WN12-CC-000123
Vuln IDs
  • V-36712
Rule IDs
  • SV-51752r1_rule
Basic authentication uses plain text passwords that could be used to compromise a system.IAIA-1
Checks: C-46881r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\WinRM\Client\ Value Name: AllowBasic Type: REG_DWORD Value: 0

Fix: F-44827r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Remote Management (WinRM) -> WinRM Client -> "Allow Basic authentication" to "Disabled".

b
The Windows Remote Management (WinRM) client must not allow unencrypted traffic.
MA-4 - Medium - CCI-003123 - V-36713 - SV-51753r1_rule
RMF Control
MA-4
Severity
M
CCI
CCI-003123
Version
WN12-CC-000124
Vuln IDs
  • V-36713
Rule IDs
  • SV-51753r1_rule
Unencrypted remote access to a system can allow sensitive information to be compromised. Windows remote management connections must be encrypted to prevent this.ECCT-1
Checks: C-46882r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\WinRM\Client\ Value Name: AllowUnencryptedTraffic Type: REG_DWORD Value: 0

Fix: F-44828r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Remote Management (WinRM) -> WinRM Client -> "Allow unencrypted traffic" to "Disabled".

b
The Windows Remote Management (WinRM) client must not use Digest authentication.
MA-4 - Medium - CCI-000877 - V-36714 - SV-51754r1_rule
RMF Control
MA-4
Severity
M
CCI
CCI-000877
Version
WN12-CC-000125
Vuln IDs
  • V-36714
Rule IDs
  • SV-51754r1_rule
Digest authentication is not as strong as other options and may be subject to man-in-the-middle attacks.IAIA-1
Checks: C-46883r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\WinRM\Client\ Value Name: AllowDigest Type: REG_DWORD Value: 0

Fix: F-44829r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Remote Management (WinRM) -> WinRM Client -> "Disallow Digest authentication" to "Enabled".

c
The Windows Remote Management (WinRM) service must not use Basic authentication.
MA-4 - High - CCI-000877 - V-36718 - SV-51755r1_rule
RMF Control
MA-4
Severity
H
CCI
CCI-000877
Version
WN12-CC-000126
Vuln IDs
  • V-36718
Rule IDs
  • SV-51755r1_rule
Basic authentication uses plain text passwords that could be used to compromise a system. ECSC-1
Checks: C-46884r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\WinRM\Service\ Value Name: AllowBasic Type: REG_DWORD Value: 0

Fix: F-44830r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Remote Management (WinRM) -> WinRM Service -> "Allow Basic authentication" to "Disabled".

b
The Windows Remote Management (WinRM) service must not allow unencrypted traffic.
MA-4 - Medium - CCI-003123 - V-36719 - SV-51756r1_rule
RMF Control
MA-4
Severity
M
CCI
CCI-003123
Version
WN12-CC-000127
Vuln IDs
  • V-36719
Rule IDs
  • SV-51756r1_rule
Unencrypted remote access to a system can allow sensitive information to be compromised. Windows remote management connections must be encrypted to prevent this.ECCT-1
Checks: C-46885r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\WinRM\Service\ Value Name: AllowUnencryptedTraffic Type: REG_DWORD Value: 0

Fix: F-44831r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Remote Management (WinRM) -> WinRM Service -> "Allow unencrypted traffic" to "Disabled".

b
The Windows Remote Management (WinRM) service must not store RunAs credentials.
IA-11 - Medium - CCI-002038 - V-36720 - SV-51757r1_rule
RMF Control
IA-11
Severity
M
CCI
CCI-002038
Version
WN12-CC-000128
Vuln IDs
  • V-36720
Rule IDs
  • SV-51757r1_rule
Storage of administrative credentials could allow unauthorized access. Disallowing the storage of RunAs credentials for Windows Remote Management will prevent them from being used with plug-ins.ECLP-1
Checks: C-46886r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows\WinRM\Service\ Value Name: DisableRunAs Type: REG_DWORD Value: 1

Fix: F-44832r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Remote Management (WinRM) -> WinRM Service -> "Disallow WinRM from storing RunAs credentials" to "Enabled".

b
Permissions for the Application event log must prevent access by nonprivileged accounts.
AU-9 - Medium - CCI-000162 - V-36722 - SV-51569r1_rule
RMF Control
AU-9
Severity
M
CCI
CCI-000162
Version
WN12-AU-000204
Vuln IDs
  • V-36722
Rule IDs
  • SV-51569r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. The Application event log may be susceptible to tampering if proper permissions are not applied.ECTP-1
Checks: C-46833r1_chk

Verify the permissions on the Application event log (Application.evtx). Standard user accounts or groups must not have greater than Read access. The default permissions listed below satisfy this requirement: Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\SYSTEM32\WINEVT\LOGS" directory. They may have been moved to another folder. If the permissions for these files are not as restrictive as the ACLs listed, this is a finding.

Fix: F-44699r1_fix

Ensure the permissions on the Application event log (Application.evtx) are configured to prevent standard user accounts or groups from having greater than Read access. The default permissions listed below satisfy this requirement: Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\SYSTEM32\WINEVT\LOGS" directory. If the location of the logs has been changed, when adding Eventlog to the permissions, it must be entered as "NT Service\Eventlog".

b
Permissions for the Security event log must prevent access by nonprivileged accounts.
AU-9 - Medium - CCI-000162 - V-36723 - SV-51571r1_rule
RMF Control
AU-9
Severity
M
CCI
CCI-000162
Version
WN12-AU-000205
Vuln IDs
  • V-36723
Rule IDs
  • SV-51571r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. The Security event log may disclose sensitive information or be susceptible to tampering if proper permissions are not applied.ECTP-1
Checks: C-46834r1_chk

Verify the permissions on the Security event log (Security.evtx). Standard user accounts or groups must not have access. The default permissions listed below satisfy this requirement: Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\SYSTEM32\WINEVT\LOGS" directory. They may have been moved to another folder. If the permissions for these files are not as restrictive as the ACLs listed, this is a finding.

Fix: F-44700r2_fix

Ensure the permissions on the Security event log (Security.evtx) are configured to prevent standard user accounts or groups from having access. The default permissions listed below satisfy this requirement: Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\SYSTEM32\WINEVT\LOGS" directory. If the location of the logs has been changed, when adding Eventlog to the permissions, it must be entered as "NT Service\Eventlog".

b
Permissions for the System event log must prevent access by nonprivileged accounts.
AU-9 - Medium - CCI-000162 - V-36724 - SV-51572r1_rule
RMF Control
AU-9
Severity
M
CCI
CCI-000162
Version
WN12-AU-000206
Vuln IDs
  • V-36724
Rule IDs
  • SV-51572r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. The System event log may be susceptible to tampering if proper permissions are not applied.ECTP-1
Checks: C-46835r1_chk

Verify the permissions on the System event log (System.evtx). Standard user accounts or groups must not have greater than Read access. The default permissions listed below satisfy this requirement: Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\SYSTEM32\WINEVT\LOGS" directory. They may have been moved to another folder. If the permissions for these files are not as restrictive as the ACLs listed, this is a finding.

Fix: F-44701r1_fix

Ensure the permissions on the System event log (System.evtx) are configured to prevent standard user accounts or groups from having greater than Read access. The default permissions listed below satisfy this requirement: Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\SYSTEM32\WINEVT\LOGS" directory. If the location of the logs has been changed, when adding Eventlog to the permissions, it must be entered as "NT Service\Eventlog".

a
User-level information must be backed up per organization defined frequency consistent with recovery time and recovery point objectives.
CM-6 - Low - CCI-000366 - V-36733 - SV-51581r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-00-000015
Vuln IDs
  • V-36733
Rule IDs
  • SV-51581r1_rule
Operating system backup is a critical step in maintaining data assurance and availability. User-level information is data generated by information system and/or application users. Backups shall be consistent with organizational recovery time and recovery point objectives.CODB-1
Checks: C-46844r2_chk

Determine whether user-level information is backed up to meet organizational recovery time and recovery point objectives. If user-level information is not backed up per organization defined frequency consistent with recovery time and recovery point objectives, this is a finding.

Fix: F-44710r2_fix

Implement user-level information backups per organization defined frequency to support recovery time and recovery point objectives.

b
The system must employ automated mechanisms or must have an application installed that, on an organization defined frequency, determines the state of information system components with regard to flaw remediation.
SI-2 - Medium - CCI-001233 - V-36734 - SV-51582r1_rule
RMF Control
SI-2
Severity
M
CCI
CCI-001233
Version
WN12-GE-000023
Vuln IDs
  • V-36734
Rule IDs
  • SV-51582r1_rule
Organizations are required to identify information systems containing software affected by recently announced software flaws (and potential vulnerabilities resulting from those flaws) and report this information to designated organizational officials with information security responsibilities (e.g., senior information security officers, information system security managers, information systems security officers). To support this requirement, an automated process or mechanism is required. VIVM-1
Checks: C-46845r1_chk

Verify the organization has an automated process to scan systems for identified software flaws and vulnerabilities. If it does not, this is a finding.

Fix: F-44711r1_fix

Establish an automated process to scan systems for identified software flaws and vulnerabilities.

b
The system must support automated patch management tools to facilitate flaw remediation to organization defined information system components.
SI-2 - Medium - CCI-002605 - V-36735 - SV-51583r1_rule
RMF Control
SI-2
Severity
M
CCI
CCI-002605
Version
WN12-GE-000024
Vuln IDs
  • V-36735
Rule IDs
  • SV-51583r1_rule
The organization (including any contractor to the organization) must promptly install security-relevant software updates (e.g., patches, service packs, hot fixes). Flaws discovered during security assessments, continuous monitoring, incident response activities, or information system error handling must also be addressed.VIVM-1
Checks: C-46846r1_chk

Verify the organization has an automated process to install security-related software updates. If it does not, this is a finding.

Fix: F-44712r1_fix

Establish a process to automatically install security-related software updates.

b
The system must query the certification authority to determine whether a public key certificate has been revoked before accepting the certificate for authentication purposes.
CM-6 - Medium - CCI-000366 - V-36736 - SV-51584r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-GE-000025
Vuln IDs
  • V-36736
Rule IDs
  • SV-51584r1_rule
Failure to verify a certificate's revocation status can result in the system accepting a revoked, and therefore unauthorized, certificate. This could result in the installation of unauthorized software or a connection for rogue networks, depending on the use for which the certificate is intended. Querying for certificate revocation mitigates the risk that the system will accept an unauthorized certificate.IATS-2, IATS-1
Checks: C-46847r1_chk

Verify the system has software installed and running that provides certificate validation and revocation checking. If it does not, this is a finding.

Fix: F-44713r1_fix

Install software that provides certificate validation and revocation checking.

b
The machine account lockout threshold must be set to 10 on systems with BitLocker enabled.
CM-6 - Medium - CCI-000366 - V-36772 - SV-51594r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-SO-000020
Vuln IDs
  • V-36772
Rule IDs
  • SV-51594r1_rule
The account lockout feature, when enabled, prevents brute-force password attacks on the system. The higher this value is, the less effective the account lockout feature will be in protecting the local system. The number of bad logon attempts should be reasonably small to minimize the possibility of a successful password attack, while allowing for honest errors made during a normal user logon.ECLO-2, ECLO-1
Checks: C-46850r1_chk

Verify whether BitLocker is enabled for the OS volumes in "BitLocker Drive Encryption" in Control Panel. If BitLocker is not enabled, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: MaxDevicePasswordFailedAttempts Value Type: REG_DWORD Value: 0x0000000a (10)

Fix: F-44716r1_fix

If BitLocker is enabled for the OS volumes, configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Interactive logon: Machine account lockout threshold" to "10" invalid logon attempts.

b
The machine inactivity limit must be set to 15 minutes, locking the system with the screensaver.
AC-11 - Medium - CCI-000057 - V-36773 - SV-51596r1_rule
RMF Control
AC-11
Severity
M
CCI
CCI-000057
Version
WN12-SO-000021
Vuln IDs
  • V-36773
Rule IDs
  • SV-51596r1_rule
Unattended systems are susceptible to unauthorized use and should be locked when unattended. The screen saver should be set at a maximum of 15 minutes and be password protected. This protects critical and sensitive data from exposure to unauthorized personnel with physical access to the computer.PESL-1
Checks: C-46851r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: InactivityTimeoutSecs Value Type: REG_DWORD Value: 0x00000384 (900) (or less)

Fix: F-44717r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Interactive logon: Machine inactivity limit" to "900" seconds" or less.

a
A screen saver must be defined.
AC-11 - Low - CCI-000060 - V-36774 - SV-51759r1_rule
RMF Control
AC-11
Severity
L
CCI
CCI-000060
Version
WN12-UC-000002
Vuln IDs
  • V-36774
Rule IDs
  • SV-51759r1_rule
Unattended systems are susceptible to unauthorized use and must be locked. Specifying a screen saver ensures the screen saver timeout lock is initiated properly. This protects critical and sensitive data from exposure to unauthorized personnel with physical access to the computer.PESL-1
Checks: C-46888r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_CURRENT_USER Registry Path: \Software\Policies\Microsoft\Windows\Control Panel\Desktop\ Value Name: SCRNSAVE.EXE Type: REG_SZ Value: scrnsave.scr

Fix: F-44834r1_fix

Configure the policy value for User Configuration -> Administrative Templates -> Control Panel -> Personalization -> "Force specific screen saver" to "Enabled" with "scrnsave.scr" specified as the screen saver executable name.

a
Changing the screen saver must be prevented.
AC-11 - Low - CCI-000060 - V-36775 - SV-51761r1_rule
RMF Control
AC-11
Severity
L
CCI
CCI-000060
Version
WN12-UC-000004
Vuln IDs
  • V-36775
Rule IDs
  • SV-51761r1_rule
Unattended systems are susceptible to unauthorized use and must be locked. Preventing users from changing the screen saver ensures an approved screen saver is used. This protects critical and sensitive data from exposure to unauthorized personnel with physical access to the computer.PESL-1
Checks: C-46890r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_CURRENT_USER Registry Path: \Software\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: NoDispScrSavPage Type: REG_DWORD Value: 1

Fix: F-44836r1_fix

Configure the policy value for User Configuration -> Administrative Templates -> Control Panel -> Personalization -> "Prevent changing screen saver" to "Enabled".

a
Notifications from Windows Push Network Service must be turned off.
CM-7 - Low - CCI-000381 - V-36776 - SV-51762r1_rule
RMF Control
CM-7
Severity
L
CCI
CCI-000381
Version
WN12-UC-000005
Vuln IDs
  • V-36776
Rule IDs
  • SV-51762r1_rule
The Windows Push Notification Service (WNS) allows third-party vendors to send updates for toasts, tiles, and badges.ECSC-1
Checks: C-46891r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_CURRENT_USER Registry Path: \SOFTWARE\Policies\Microsoft\Windows\CurrentVersion\PushNotifications\ Value Name: NoCloudApplicationNotification Type: REG_DWORD Value: 1

Fix: F-44837r1_fix

Configure the policy value for User Configuration -> Administrative Templates -> Start Menu and Taskbar -> Notifications -> "Turn off notifications network usage" to "Enabled".

a
Toast notifications to the lock screen must be turned off.
CM-7 - Low - CCI-000381 - V-36777 - SV-51763r1_rule
RMF Control
CM-7
Severity
L
CCI
CCI-000381
Version
WN12-UC-000006
Vuln IDs
  • V-36777
Rule IDs
  • SV-51763r1_rule
Toast notifications that are displayed on the lock screen could display sensitive information to unauthorized personnel. Turning off this feature will limit access to the information to a logged on user.ECSC-1
Checks: C-46892r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_CURRENT_USER Registry Path: \SOFTWARE\Policies\Microsoft\Windows\CurrentVersion\PushNotifications\ Value Name: NoToastApplicationNotificationOnLockScreen Type: REG_DWORD Value: 1

Fix: F-44838r1_fix

Configure the policy value for User Configuration -> Administrative Templates -> Start Menu and Taskbar -> Notifications -> "Turn off toast notifications on the lock screen" to "Enabled".

b
The Enhanced Mitigation Experience Toolkit (EMET) V4.1 Update 1 or later must be installed on the system.
CM-6 - Medium - CCI-000366 - V-39137 - SV-51587r3_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-GE-000100
Vuln IDs
  • V-39137
Rule IDs
  • SV-51587r3_rule
Attackers are constantly looking for vulnerabilities in systems and applications. The Enhanced Mitigation Experience Toolkit can enable several mechanisms, such as Data Execution Prevention (DEP), Address Space Layout Randomization (ASLR), and Structured Exception Handler Overwrite Protection (SEHOP) on the system and applications, adding additional levels of protection.ECVP-1
Checks: C-49486r2_chk

Verify EMET V4.1 Update 1 or later is installed on the system. If EMET is not installed, or at the minimum required version, this is a finding.

Fix: F-49708r2_fix

Install EMET V4.1 Update 1 or later on the system. EMET is available for download from Microsoft.

b
Audit data of systems containing sources and methods intelligence (SAMI) must be retained for at least five years.
CM-6 - Medium - CCI-000366 - V-40166 - SV-52124r2_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-AU-000202
Vuln IDs
  • V-40166
Rule IDs
  • SV-52124r2_rule
Audit records are essential for investigating system activity after the fact. Retention periods for audit data are determined based on the sensitivity of the data handled by the system.ECRR-1
Checks: C-46942r2_chk

If audit data does not contain SAMI data, this is NA. Determine whether audit data containing SAMI data is retained for at least five years. If audit data containing SAMI data is not retained for at least five years, this is a finding.

Fix: F-45149r2_fix

If audit data contains SAMI data, ensure it is retained for at least five years.

a
Backups of system-level information must be protected.
CM-6 - Low - CCI-000366 - V-40172 - SV-52130r2_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-00-000016
Vuln IDs
  • V-40172
Rule IDs
  • SV-52130r2_rule
A system backup will usually include sensitive information such as user accounts that could be used in an attack. As a valuable system resource, the system backup must be protected and stored in a physically secure location.CODB-2
Checks: C-46943r1_chk

Determine if system-level information backups are protected from destruction and stored in a physically secure location. If they are not, this is a finding.

Fix: F-45156r1_fix

Ensure system-level information backups are stored in a secure location and protected from destruction.

a
System-related documentation must be backed up per organization defined frequency consistent with recovery time and recovery point objectives.
CM-6 - Low - CCI-000366 - V-40173 - SV-52131r2_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-00-000017
Vuln IDs
  • V-40173
Rule IDs
  • SV-52131r2_rule
Operating system backup is a critical step in maintaining data assurance and availability. Information system and security-related documentation contains information pertaining to system configuration and security settings. Backups shall be consistent with organizational recovery time and recovery point objectives.CODB-1
Checks: C-46944r1_chk

Determine whether system-related documentation is backed up to meet organizational recovery time and recovery point objectives. If system-related documentation is not backed up per organization defined frequency consistent with recovery time and recovery point objectives, this is a finding.

Fix: F-45157r1_fix

Back up system-related documentation per organization defined frequency to support recovery time and recovery point objectives.

c
The antivirus program signature files must be kept updated.
CM-6 - High - CCI-000366 - V-40175 - SV-52133r2_rule
RMF Control
CM-6
Severity
H
CCI
CCI-000366
Version
WN12-GE-000003
Vuln IDs
  • V-40175
Rule IDs
  • SV-52133r2_rule
Virus scan programs are a primary line of defense against the introduction of viruses and malicious code that can destroy data and even render a computer inoperable. Utilizing the virus scan program provides the ability to detect malicious code before extensive damage occurs. Updated virus scan data files help protect a system, as new malware is identified by the software vendors on a regular basis.ECVP-1
Checks: C-46945r1_chk

If V-19910 from an antivirus STIG has been applied to the system, this is NA. Verify the signature file for the virus scan program is up to date. If the antivirus program signature file is not dated within the past 7 days, this is a finding. The version numbers and the date of the signature file can generally be checked by starting the antivirus program. The information may appear in the antivirus window or be available in the Help &gt; About window. The location varies from product to product.

Fix: F-45159r1_fix

Configure the antivirus program to update the signature file at least every 7 days. More frequent (daily) updates are recommended.

b
Permissions for program file directories must conform to minimum requirements.
AC-3 - Medium - CCI-002165 - V-40177 - SV-52135r2_rule
RMF Control
AC-3
Severity
M
CCI
CCI-002165
Version
WN12-GE-000007
Vuln IDs
  • V-40177
Rule IDs
  • SV-52135r2_rule
Changing the system's file and directory permissions allows the possibility of unauthorized and anonymous modification to the operating system and installed applications. The default permissions are adequate when the Security Option "Network access: Let everyone permissions apply to anonymous users" is set to "Disabled" (V-3377). ECCD-1, ECCD-2
Checks: C-46946r1_chk

The default permissions are adequate when the Security Option "Network access: Let everyone permissions apply to anonymous users" is set to "Disabled" (V-3377). If the default ACLs are maintained and the referenced option is set to "Disabled", this is not a finding. Verify the default permissions for the program file directories (Program Files and Program Files (x86)). Nonprivileged groups such as Users or Authenticated Users must not have greater than Read &amp; execute permissions except where noted as defaults. (Individual accounts must not be used to assign permissions.) Viewing in File Explorer: For each folder, view the Properties. Select the "Security" tab, and the "Advanced" button. Default Permissions: \Program Files and \Program Files (x86) Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to TrustedInstaller - Full control - This folder and subfolders SYSTEM - Modify - This folder only SYSTEM - Full control - Subfolders and files only Administrators - Modify - This folder only Administrators - Full control - Subfolders and files only Users - Read &amp; execute - This folder, subfolders and files CREATOR OWNER - Full control - Subfolders and files only ALL APPLICATION PACKAGES - Read &amp; execute - This folder, subfolders and files Alternately, use Icacls: Open a Command prompt (admin). Enter icacls followed by the directory: icacls "c:\program files" icacls "c:\program files (x86)" The following results should be displayed as each is entered: c:\program files NT SERVICE\TrustedInstaller:(F) NT SERVICE\TrustedInstaller:(CI)(IO)(F) NT AUTHORITY\SYSTEM:(M) NT AUTHORITY\SYSTEM:(OI)(CI)(IO)(F) BUILTIN\Administrators:(M) BUILTIN\Administrators:(OI)(CI)(IO)(F) BUILTIN\Users:(RX) BUILTIN\Users:(OI)(CI)(IO)(GR,GE) CREATOR OWNER:(OI)(CI)(IO)(F) APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(RX) APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE) Successfully processed 1 files; Failed processing 0 files

Fix: F-45161r1_fix

Maintain the default permissions for the program file directories and configure the Security Option: "Network access: Let everyone permissions apply to anonymous users" to "Disabled" (V-3377). Default Permissions: \Program Files and \Program Files (x86) Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to TrustedInstaller - Full control - This folder and subfolders SYSTEM - Modify - This folder only SYSTEM - Full control - Subfolders and files only Administrators - Modify - This folder only Administrators - Full control - Subfolders and files only Users - Read & execute - This folder, subfolders and files CREATOR OWNER - Full control - Subfolders and files only ALL APPLICATION PACKAGES - Read & execute - This folder, subfolders and files

b
Permissions for system drive root directory (usually C:\) must conform to minimum requirements.
AC-3 - Medium - CCI-002165 - V-40178 - SV-52136r2_rule
RMF Control
AC-3
Severity
M
CCI
CCI-002165
Version
WN12-GE-000006
Vuln IDs
  • V-40178
Rule IDs
  • SV-52136r2_rule
Changing the system's file and directory permissions allows the possibility of unauthorized and anonymous modification to the operating system and installed applications. The default permissions are adequate when the Security Option "Network access: Let everyone permissions apply to anonymous users" is set to "Disabled" (V-3377). ECCD-2, ECCD-1
Checks: C-46947r1_chk

The default permissions are adequate when the Security Option "Network access: Let everyone permissions apply to anonymous users" is set to "Disabled" (V-3377). If the default ACLs are maintained and the referenced option is set to "Disabled", this is not a finding. Verify the default permissions for the system drive's root directory (usually C:\). Nonprivileged groups such as Users or Authenticated Users must not have greater than Read &amp; execute permissions except where noted as defaults. (Individual accounts must not be used to assign permissions.) Viewing in File Explorer: View the Properties of system drive root directory. Select the "Security" tab, and the "Advanced" button. C:\ Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to SYSTEM - Full control - This folder, subfolders and files Administrators - Full control - This folder, subfolders and files Users - Read &amp; execute - This folder, subfolders and files Users - Create folders / append data - This folder and subfolders Users - Create files / write data - Subfolders only CREATOR OWNER - Full Control - Subfolders and files only Alternately, use Icacls: Open a Command prompt (admin). Enter icacls followed by the directory: icacls c:\ The following results should be displayed: c:\ NT AUTHORITY\SYSTEM:(OI)(CI)(F) BUILTIN\Administrators:(OI)(CI)(F) BUILTIN\Users:(OI)(CI)(RX) BUILTIN\Users:(CI)(AD) BUILTIN\Users:(CI)(IO)(WD) CREATOR OWNER:(OI)(CI)(IO)(F) Successfully processed 1 files; Failed processing 0 files

Fix: F-45162r1_fix

Maintain the default permissions for the system drive's root directory and configure the Security Option: "Network access: Let everyone permissions apply to anonymous users" to "Disabled" (V-3377). Default Permissions C:\ Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to SYSTEM - Full control - This folder, subfolders and files Administrators - Full control - This folder, subfolders and files Users - Read & execute - This folder, subfolders and files Users - Create folders / append data - This folder and subfolders Users - Create files / write data - Subfolders only CREATOR OWNER - Full Control - Subfolders and files only

b
Permissions for Windows installation directory must conform to minimum requirements.
AC-3 - Medium - CCI-002165 - V-40179 - SV-52137r2_rule
RMF Control
AC-3
Severity
M
CCI
CCI-002165
Version
WN12-GE-000008
Vuln IDs
  • V-40179
Rule IDs
  • SV-52137r2_rule
Changing the system's file and directory permissions allows the possibility of unauthorized and anonymous modification to the operating system and installed applications. The default permissions are adequate when the Security Option "Network access: Let everyone permissions apply to anonymous users" is set to "Disabled" (V-3377). ECCD-1, ECCD-2
Checks: C-46948r1_chk

The default permissions are adequate when the Security Option "Network access: Let everyone permissions apply to anonymous users" is set to "Disabled" (V-3377). If the default ACLs are maintained and the referenced option is set to "Disabled", this is not a finding. Verify the default permissions for the Windows installation directory (usually C:\Windows). Nonprivileged groups such as Users or Authenticated Users must not have greater than Read &amp; execute permissions except where noted as defaults. (Individual accounts must not be used to assign permissions.) Viewing in File Explorer: View the Properties of the folder. Select the "Security" tab, and the "Advanced" button. Default Permissions: \Windows Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to TrustedInstaller - Full control - This folder and subfolders SYSTEM - Modify - This folder only SYSTEM - Full control - Subfolders and files only Administrators - Modify - This folder only Administrators - Full control - Subfolders and files only Users - Read &amp; execute - This folder, subfolders and files CREATOR OWNER - Full control - Subfolders and files only ALL APPLICATION PACKAGES - Read &amp; execute - This folder, subfolders and files Alternately, use Icacls: Open a Command prompt (admin). Enter icacls followed by the directory: icacls c:\windows The following results should be displayed: c:\windows NT SERVICE\TrustedInstaller:(F) NT SERVICE\TrustedInstaller:(CI)(IO)(F) NT AUTHORITY\SYSTEM:(M) NT AUTHORITY\SYSTEM:(OI)(CI)(IO)(F) BUILTIN\Administrators:(M) BUILTIN\Administrators:(OI)(CI)(IO)(F) BUILTIN\Users:(RX) BUILTIN\Users:(OI)(CI)(IO)(GR,GE) CREATOR OWNER:(OI)(CI)(IO)(F) APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(RX) APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE) Successfully processed 1 files; Failed processing 0 files

Fix: F-45163r1_fix

Maintain the default file ACLs and configure the Security Option: "Network access: Let everyone permissions apply to anonymous users" to "Disabled" (V-3377). Default Permissions: Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to TrustedInstaller - Full control - This folder and subfolders SYSTEM - Modify - This folder only SYSTEM - Full control - Subfolders and files only Administrators - Modify - This folder only Administrators - Full control - Subfolders and files only Users - Read & execute - This folder, subfolders and files CREATOR OWNER - Full control - Subfolders and files only ALL APPLICATION PACKAGES - Read & execute - This folder, subfolders and files

b
Virtual guest operating systems must be registered in a vulnerability and asset management system.
CM-6 - Medium - CCI-000366 - V-40193 - SV-52151r2_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-GE-000011
Vuln IDs
  • V-40193
Rule IDs
  • SV-52151r2_rule
Virtual guest operating systems share the same vulnerabilities as operating systems running on dedicated hardware and must be individually assessed for security guidance compliance. The VMS used may be DISA VMS or a similar vulnerability and asset management system.ECSC-1
Checks: C-46949r1_chk

If no virtual guest operating systems exist, this is NA. Determine if virtual guest operating systems have been registered in a vulnerability and asset management system as separate assets. If they have not, this is a finding.

Fix: F-45176r1_fix

Register all virtual guest operating systems as separate assets in a vulnerability and asset management system.

b
System BIOS or system controllers must not allow user-level access.
CM-6 - Medium - CCI-000366 - V-40195 - SV-52153r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-00-000002-02
Vuln IDs
  • V-40195
Rule IDs
  • SV-52153r1_rule
A system's BIOS or system controller handles the initial startup of a system, and its configuration must be protected from unauthorized modification. When the BIOS or system controller supports the creation of user accounts or passwords, such protections must be used and accounts/passwords only assigned to system administrators. Failure to protect BIOS or system controller settings could result in Denial of Service or compromise of the system resulting from unauthorized configuration changes.ECLP-1
Checks: C-46950r1_chk

If the BIOS or system controller does not support user-level access in addition to supervisor/administrator access, this is NA. If the BIOS or system controller supports user-level access in addition to supervisor/administrator access, determine whether this access is enabled. If user-level access is enabled, this is a finding.

Fix: F-45179r1_fix

Access the system's BIOS or system controller. Disable user-level access.

b
Members of the Backup Operators group must have separate accounts for backup duties and normal operational tasks.
CM-6 - Medium - CCI-000366 - V-40198 - SV-52157r2_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-00-000009-02
Vuln IDs
  • V-40198
Rule IDs
  • SV-52157r2_rule
Backup Operators are able to read and write to any file in the system, regardless of the rights assigned to it. Backup and restore rights permit users to circumvent the file access restrictions present on NTFS disk drives for backup and restore purposes. Members of the Backup Operators group must have separate logon accounts for performing backup duties.ECLP-1
Checks: C-46952r1_chk

If no accounts are members of the Backup Operators group, this is NA. Verify users with accounts in the Backup Operators group have a separate user account for backup functions and for performing normal user tasks. If users with accounts in the Backup Operators group do not have separate accounts for backup functions and standard user functions, this is a finding.

Fix: F-45183r1_fix

Ensure each member of the Backup Operators group has separate accounts for backup functions and standard user functions.

b
The system must be configured to audit Object Access - Central Access Policy Staging failures.
AU-12 - Medium - CCI-000172 - V-40200 - SV-52159r3_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000060
Vuln IDs
  • V-40200
Rule IDs
  • SV-52159r3_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Central Access Policy Staging auditing under Object Access is used to enable the recording of events related to differences in permissions between central access policies and proposed policies.ECAR-3, ECAR-2
Checks: C-46953r2_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Object Access -&gt; Central Policy Staging - Failure

Fix: F-45185r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Object Access -> "Audit Central Access Policy Staging" with "Failure" selected.

b
The system must be configured to audit Object Access - Central Access Policy Staging successes.
AU-12 - Medium - CCI-000172 - V-40202 - SV-52161r3_rule
RMF Control
AU-12
Severity
M
CCI
CCI-000172
Version
WN12-AU-000059
Vuln IDs
  • V-40202
Rule IDs
  • SV-52161r3_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Central Access Policy Staging auditing under Object Access is used to enable the recording of events related to differences in permissions between central access policies and proposed policies.ECAR-3, ECAR-2
Checks: C-46954r2_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (V-14230) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: -Open a Command Prompt with elevated privileges ("Run as Administrator"). -Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Object Access -&gt; Central Policy Staging - Success

Fix: F-45186r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Advanced Audit Policy Configuration -> System Audit Policies -> Object Access -> "Audit Central Access Policy Staging" with "Success" selected.

b
Only the default client printer must be redirected to the Remote Desktop Session Host. (Remote Desktop Services Role).
CM-6 - Medium - CCI-000366 - V-40204 - SV-52163r2_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-CC-000136
Vuln IDs
  • V-40204
Rule IDs
  • SV-52163r2_rule
Allowing the redirection of only the default client printer to a Remote Desktop session helps reduce possible exposure of sensitive data.ECSC-1
Checks: C-46955r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \Software\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: RedirectOnlyDefaultClientPrinter Type: REG_DWORD Value: 1

Fix: F-45188r2_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Printer Redirection -> "Redirect only the default client printer" to "Enabled".

b
The Smart Card Removal Policy service must be configured to automatic.
CM-6 - Medium - CCI-000366 - V-40206 - SV-52165r2_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-SV-000106
Vuln IDs
  • V-40206
Rule IDs
  • SV-52165r2_rule
The automatic start of the Smart Card Removal Policy service is required to support the smart card removal behavior requirement.ECSC-1
Checks: C-46956r1_chk

Verify the Smart Card Removal Policy service is configured to "Automatic". Run "Services.msc". If the Startup Type for Smart Card Removal Policy is not set to Automatic, this is a finding.

Fix: F-45191r1_fix

Configure the Startup Type for the Smart Card Removal Policy service to "Automatic".

b
The US DoD CCEB Interoperability Root CA 1 to DoD Root CA 2 cross-certificate must be installed into the Untrusted Certificates Store.
IA-5 - Medium - CCI-000185 - V-40237 - SV-52196r2_rule
RMF Control
IA-5
Severity
M
CCI
CCI-000185
Version
WN12-PK-000004
Vuln IDs
  • V-40237
Rule IDs
  • SV-52196r2_rule
To ensure users do not experience denial of service on NIPRNet when performing certificate-based authentication to DoD websites due to the system chaining to a root other than DoD Root CA 2, the US DoD CCEB Interoperability Root CA 1 to DoD Root CA 2 cross-certificate must be installed in the Untrusted Certificate Store. This requirement only applies to NIPRNet systems.IATS-2, IATS-1
Checks: C-49208r1_chk

Verify the DoD Root CA 2 certificate issued by US DoD CCEB Interoperability Root CA 1 is installed on NIPRNet systems as an Untrusted Certificate using the Certificates MMC snap-in: Run "MMC". Select "File", "Add/Remove Snap-in". Select "Certificates", click "Add". Select "Computer account", click "Next". Select "Local computer: (the computer this console is running on)", click "Finish". Click "OK". Expand "Certificates" and navigate to "Untrusted Certificates\Certificates". Search in the center pane for "DoD Root CA 2" under "Issued To" with "US DoD CCEB Interoperability Root CA 1" as "Issued By". If there is no entry for this certificate, this is a finding. Select the certificate. Right click and select "Open". Select the "Details" Tab. Scroll to the bottom and select "Thumbprint Algorithm". Verify the Value is "sha1". If the value for "Thumbprint Algorithm" is not "sha1", this is a finding. Next select "Thumbprint". If the value for the "Thumbprint" field is not "7d:a8:e8:42:96:ee:23:88:18:ee:42:72:87:77:45:08:b2:6d:09:4a", this is a finding.

Fix: F-48770r1_fix

Install the US DoD CCEB Interoperability Root CA 1 to DoD Root CA 2 cross-certificate on NIPRNet systems only. Administrators should run the Federal Bridge Certification Authority (FBCA) Cross-Certificate Removal Tool once as an administrator and once as the current user. The FBCA Cross-Certificate Remover tool and user guide is available on IASE at http://iase.disa.mil/pki-pke/function_pages/tools.html.

b
A host-based firewall must be installed and enabled on the system.
CM-6 - Medium - CCI-000366 - V-42420 - SV-55085r1_rule
RMF Control
CM-6
Severity
M
CCI
CCI-000366
Version
WN12-FW-000001
Vuln IDs
  • V-42420
Rule IDs
  • SV-55085r1_rule
A firewall provides a line of defense against attack, allowing or blocking inbound and outbound connections based on a set of rules.ECSC-1
Checks: C-48767r2_chk

Determine if a host-based firewall is installed and enabled on the system. If a host-based firewall is not installed and enabled on the system, this is a finding. The configuration requirements will be determined by the applicable firewall STIG.

Fix: F-47956r2_fix

Install and enable a host-based firewall on the system.

b
The display of slide shows on the lock screen must be disabled. (Windows 2012 R2)
CM-7 - Medium - CCI-000381 - V-43238 - SV-56343r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000138
Vuln IDs
  • V-43238
Rule IDs
  • SV-56343r1_rule
Slide shows that are displayed on the lock screen could display sensitive information to unauthorized personnel. Turning off this feature will limit access to the information to a logged on user.ECSC-1
Checks: C-49387r1_chk

This requirement is NA for the initial release of Windows 2012. It is applicable to Windows 2012 R2. Verify the registry value below. If it does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Personalization\ Value Name: NoLockScreenSlideshow Value Type: REG_DWORD Value: 1

Fix: F-49190r1_fix

This requirement is NA for the initial release of Windows 2012. It is applicable to Windows 2012 R2. Configure the policy value for Computer Configuration -> Administrative Templates -> Control Panel -> Personalization -> "Prevent enabling lock screen slide show" to "Enabled".

b
Command line data must be included in process creation events. (Windows 2012 R2)
AU-3 - Medium - CCI-000135 - V-43239 - SV-56344r1_rule
RMF Control
AU-3
Severity
M
CCI
CCI-000135
Version
WN12-CC-000139
Vuln IDs
  • V-43239
Rule IDs
  • SV-56344r1_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. This setting enables the logging of additional data for process creation events.ECSC-1
Checks: C-49388r1_chk

This requirement is NA for the initial release of Windows 2012. It is applicable to Windows 2012 R2. Verify the registry value below. If it does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\Audit\ Value Name: ProcessCreationIncludeCmdLine_Enabled Value Type: REG_DWORD Value: 1

Fix: F-49191r1_fix

This requirement is NA for the initial release of Windows 2012. It is applicable to Windows 2012 R2. Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Audit Process Creation -> "Include command line in process creation events" to "Enabled".

b
The network selection user interface (UI) must not be displayed on the logon screen. (Windows 2012 R2)
CM-7 - Medium - CCI-000381 - V-43240 - SV-56346r1_rule
RMF Control
CM-7
Severity
M
CCI
CCI-000381
Version
WN12-CC-000140
Vuln IDs
  • V-43240
Rule IDs
  • SV-56346r1_rule
Enabling interaction with the network selection UI allows users to change connections to available networks without signing into Windows.ECSC-1
Checks: C-49389r1_chk

This requirement is NA for the initial release of Windows 2012. It is applicable to Windows 2012 R2. Verify the registry value below. If it does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\System\ Value Name: DontDisplayNetworkSelectionUI Value Type: REG_DWORD Value: 1

Fix: F-49192r1_fix

This requirement is NA for the initial release of Windows 2012. It is applicable to Windows 2012 R2. Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Logon -> "Do not display network selection UI" to "Enabled".

a
The setting to allow Microsoft accounts to be optional for modern style apps must be enabled. (Windows 2012 R2)
CM-6 - Low - CCI-000366 - V-43241 - SV-56353r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-CC-000141
Vuln IDs
  • V-43241
Rule IDs
  • SV-56353r1_rule
Control of credentials and the system must be maintained within the enterprise. Enabling this setting allows enterprise credentials to be used with modern style apps that support this, instead of Microsoft accounts.ECSC-1
Checks: C-49390r1_chk

This requirement is NA for the initial release of Windows 2012. It is applicable to Windows 2012 R2. Verify the registry value below. If it does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System Value Name: MSAOptional Value Type: REG_DWORD Value: 1

Fix: F-49195r1_fix

This requirement is NA for the initial release of Windows 2012. It is applicable to Windows 2012 R2. Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> App Runtime -> "Allow Microsoft accounts to be optional" to "Enabled".

b
Automatically signing in the last interactive user after a system-initiated restart must be disabled. (Windows 2012 R2)
IA-11 - Medium - CCI-002038 - V-43245 - SV-56355r1_rule
RMF Control
IA-11
Severity
M
CCI
CCI-002038
Version
WN12-CC-000145
Vuln IDs
  • V-43245
Rule IDs
  • SV-56355r1_rule
Windows 2012 R2 can be configured to automatically sign the user back in after a Windows Update restart. Some protections are in place to help ensure this is done in a secure fashion; however, disabling this will prevent the caching of credentials for this purpose and also ensure the user is aware of the restart.ECSC-1
Checks: C-49391r1_chk

This requirement is NA for the initial release of Windows 2012. It is applicable to Windows 2012 R2. Verify the registry value below. If it does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: DisableAutomaticRestartSignOn Value Type: REG_DWORD Value: 1

Fix: F-49196r1_fix

This requirement is NA for the initial release of Windows 2012. It is applicable to Windows 2012 R2. Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Logon Options -> "Sign-in last interactive user automatically after a system-initiated restart" to "Disabled".

a
Windows Update must not connect to any Internet locations. (Windows 2012 R2)
CM-6 - Low - CCI-000366 - V-43246 - SV-56356r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-CC-000146
Vuln IDs
  • V-43246
Rule IDs
  • SV-56356r1_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. When Windows Update is configured to use an intranet location, it will still communicate with the public Windows Update service periodically to retrieve information. This setting will prevent that from occurring.ECSC-1
Checks: C-49392r1_chk

This requirement is NA for the initial release of Windows 2012. It is applicable to Windows 2012 R2. Verify the registry value below. If it does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\ Value Name: DoNotConnectToWindowsUpdateInternetLocations Value Type: REG_DWORD Value: 1

Fix: F-49197r1_fix

This requirement is NA for the initial release of Windows 2012. It is applicable to Windows 2012 R2. Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Update -> "Do not connect to any Windows Update Internet locations" to "Enabled".

a
A group named DenyNetworkAccess must be defined on domain systems to include all local administrator accounts. (Windows 2012)
CM-6 - Low - CCI-000366 - V-45589 - SV-58487r1_rule
RMF Control
CM-6
Severity
L
CCI
CCI-000366
Version
WN12-GE-000200
Vuln IDs
  • V-45589
Rule IDs
  • SV-58487r1_rule
Several user rights on domain systems require that local administrator accounts be assigned to them. Defining a consistent group name allows compliance to be more easily determined.ECLP-1
Checks: C-49601r3_chk

This requirement is NA for non domain-joined systems. *This requirement is NA for Windows 2012 R2 systems using the new built-in security groups below. Review local groups on the system. Compare the membership of the "DenyNetworkAccess" group with the local Administrators group. Verify the group "DenyNetworkAccess" includes all local administrator accounts as members. This includes the built-in Administrator account. It does not include domain administrative accounts or groups. If the group "DenyNetworkAccess" does not exist or does not include all local administrator accounts, this is a finding. *Windows 2012 R2 added new built-in security groups for assigning permissions and rights to local accounts. Use these groups instead of creating a group for local administrator accounts to apply to deny rights where required. Assign the group "Local account and member of Administrators group" or the more restrictive "Local account".

Fix: F-49949r3_fix

This requirement is NA for non domain-joined systems. *This requirement is NA for Windows 2012 R2 systems using the new built-in security groups below. Create a local group with the name "DenyNetworkAccess" if one does not exist on the system. Include all local administrator accounts as members of the group, including the built-in Administrator account. *Windows 2012 R2 added new built-in security groups for assigning permissions and rights to local accounts. Use these groups instead of creating a group for local administrator accounts to apply to deny rights where required. Assign the group "Local account and member of Administrators group" or the more restrictive "Local account".