Windows 10 Security Technical Implementation Guide

Checks: C-64053r3_chk

Verify domain-joined systems are using Windows 10 Enterprise Edition 64-bit version. For standalone systems, this is NA. Open "Settings". Select "System", then "About". If "Edition" is not "Windows 10 Enterprise", this is a finding. If "System type" is not "64-bit operating system…", this is a finding.

Fix: F-69237r2_fix

Use Windows 10 Enterprise 64-bit version for domain-joined systems.

Generate Mitigation Statement:

Checks: C-64055r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Installer\ Value Name: EnableUserControl Value Type: REG_DWORD Value: 0

Fix: F-69239r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Installer >> "Allow user control over installs" to "Disabled".

Generate Mitigation Statement:

Checks: C-64061r1_chk

The default behavior is for Internet Explorer to warn users and select whether to allow or refuse installation when a web-based program attempts to install software on the system. If the registry value name below does not exist, this is not a finding. If it exists and is configured with a value of "0", this is not a finding. If it exists and is configured with a value of "1", this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Installer\ Value Name: SafeForScripting Value Type: REG_DWORD Value: 0 (or if the Value Name does not exist)

Fix: F-69245r1_fix

The default behavior is for Internet Explorer to warn users and select whether to allow or refuse installation when a web-based program attempts to install software on the system. If this needs to be corrected, configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Installer >> "Prevent Internet Explorer security prompt for Windows Installer scripts" to "Not Configured" or "Disabled".

Generate Mitigation Statement:

Checks: C-64067r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: DisableAutomaticRestartSignOn Value Type: REG_DWORD Value: 1

Fix: F-69251r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Logon Options >> "Sign-in last interactive user automatically after a system-initiated restart" to "Disabled".

Generate Mitigation Statement:

Checks: C-82143r1_chk

Verify mobile systems such as laptops and tablets employ DoD-approved full disk encryption. The method will vary depending on the package used. If full disk encryption is not implemented, this is a finding. If BitLocker is used, verify it is turned on for the operating system drive and any fixed data drives. Open "BitLocker Drive Encryption" from the Control Panel. If the operating system drive or any fixed data drives have "Turn on BitLocker", this is a finding.

Fix: F-89197r2_fix

Enable full disk encryption on mobile systems such as laptops and tablets using an approved DoD encryption package. If BitLocker, included in Windows, is used it can be enabled in the Control Panel under "BitLocker Drive Encryption" as well as other management tools.

Generate Mitigation Statement:

Checks: C-64075r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WinRM\Client\ Value Name: AllowUnencryptedTraffic Value Type: REG_DWORD Value: 0

Fix: F-69259r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Client >> "Allow unencrypted traffic" to "Disabled".

Generate Mitigation Statement:

Checks: C-64079r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WinRM\Client\ Value Name: AllowDigest Value Type: REG_DWORD Value: 0

Fix: F-69263r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Client >> "Disallow Digest authentication" to "Enabled".

Generate Mitigation Statement:

Checks: C-64077r1_chk

Determine if an approved tool capable of continuous scanning is loaded on the system. The recommended system is the McAfee HBSS. If no such tool is installed on the system, this is a finding.

Fix: F-69261r1_fix

Install an approved HBSS solution onto the system.

Generate Mitigation Statement:

Checks: C-69225r4_chk

This is applicable to unclassified systems; for other systems this is NA. Verify the operating system employs a deny-all, permit-by-exception policy to allow the execution of authorized software programs. This must include packaged apps such as the universals apps installed by default on systems. If an application whitelisting program is not in use on the system, this is a finding. Configuration of whitelisting applications will vary by the program. AppLocker is a whitelisting application built into Windows 10 Enterprise. A deny-by-default implementation is initiated by enabling any AppLocker rules within a category, only allowing what is specified by defined rules. If AppLocker is used, perform the following to view the configuration of AppLocker: Run "PowerShell". Execute the following command, substituting [c:\temp\file.xml] with a location and file name appropriate for the system: Get-AppLockerPolicy -Effective -XML > c:\temp\file.xml This will produce an xml file with the effective settings that can be viewed in a browser or opened in a program such as Excel for review. Implementation guidance for AppLocker is available in the NSA paper "Application Whitelisting using Microsoft AppLocker" at the following link: https://www.iad.gov/iad/library/ia-guidance/tech-briefs/application-whitelisting-using-microsoft-applocker.cfm

Fix: F-69267r3_fix

Configure an application whitelisting program to employ a deny-all, permit-by-exception policy to allow the execution of authorized software programs. Configuration of whitelisting applications will vary by the program. AppLocker is a whitelisting application built into Windows 10 Enterprise. If AppLocker is used, it is configured through group policy in Computer Configuration >> Windows Settings >> Security Settings >> Application Control Policies >> AppLocker. Implementation guidance for AppLocker is available in the NSA paper "Application Whitelisting using Microsoft AppLocker" at the following link: https://www.iad.gov/iad/library/ia-guidance/tech-briefs/application-whitelisting-using-microsoft-applocker.cfm

Generate Mitigation Statement:

Checks: C-64093r1_chk

Verify the system does not include other operating system installations. Run "Advanced System Settings". Select the "Advanced" tab. Click the "Settings" button in the "Startup and Recovery" section. If the drop-down list box "Default operating system:" shows any operating system other than Windows 10, this is a finding.

Fix: F-69275r1_fix

Ensure Windows 10 is the only operating system on a device. Remove alternate operating systems.

Generate Mitigation Statement:

Checks: C-64095r1_chk

Non system-created shares should not typically exist on workstations. If only system-created shares exist on the system this is NA. Run "Computer Management". Navigate to System Tools >> Shared Folders >> Shares. If the only shares listed are "ADMIN$", "C$" and "IPC$", this is NA. (Selecting Properties for system-created shares will display a message that it has been shared for administrative purposes.) Right click any non-system-created shares. Select "Properties". Select the "Share Permissions" tab. Verify the necessity of any shares found. If the file shares have not been reconfigured to restrict permissions to the specific groups or accounts that require access, this is a finding. Select the "Security" tab. If the NTFS permissions have not been reconfigured to restrict permissions to the specific groups or accounts that require access, this is a finding.

Fix: F-69277r1_fix

If a non system-created share is required on a system, configure the share and NTFS permissions to limit access to the specific groups or accounts that require it. Remove any unnecessary non-system created shares.

Generate Mitigation Statement:

Checks: C-64101r1_chk

Run "Computer Management". Navigate to System Tools >> Local Users and Groups >> Groups. Review the members of the Backup Operators group. If the group contains no accounts, this is not a finding. If the group contains any accounts, the accounts must be specifically for backup functions. If the group contains any standard user accounts used for performing normal user tasks, this is a finding.

Fix: F-69283r1_fix

Create separate accounts for backup operations for users with this privilege.

Generate Mitigation Statement:

Checks: C-76165r2_chk

Run "Computer Management". Navigate to System Tools >> Local Users and Groups >> Groups. Double click on "Hyper-V Administrators". If any groups or user accounts are listed in "Members:", this is a finding. If the workstation has an approved use of Hyper-V, such as being used as a dedicated admin workstation using Hyper-V to separate administration and standard user functions, the account(s) needed to access the virtual machine is not a finding.

Fix: F-69285r1_fix

Remove any groups or users from the "Hyper-V Administrators" group.

Generate Mitigation Statement:

Checks: C-64109r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WinRM\Service\ Value Name: AllowUnencryptedTraffic Value Type: REG_DWORD Value: 0

Fix: F-69289r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Service >> "Allow unencrypted traffic" to "Disabled".

Generate Mitigation Statement:

Checks: C-64111r1_chk

Run "Computer Management". Navigate to System Tools >> Local Users and Groups >> Users. Double click each active account. If "Password never expires" is selected for any account, this is a finding.

Fix: F-69291r1_fix

Configure all passwords to expire. Run "Computer Management". Navigate to System Tools >> Local Users and Groups >> Users. Double click each active account. Ensure "Password never expires" is not checked on all active accounts.

Generate Mitigation Statement:

Checks: C-77003r1_chk

The default file system permissions are adequate when the Security Option "Network access: Let Everyone permissions apply to anonymous users" is set to "Disabled" (WN10-SO-000160). If the default file system permissions are maintained and the referenced option is set to "Disabled", this is not a finding. Verify the default permissions for the sample directories below. Non-privileged groups such as Users or Authenticated Users must not have greater than Read & execute permissions except where noted as defaults. (Individual accounts must not be used to assign permissions.) Viewing in File Explorer: Select the "Security" tab, and the "Advanced" button. C:\ Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to Administrators - Full control - This folder, subfolders and files SYSTEM - Full control - This folder, subfolders and files Users - Read & execute - This folder, subfolders and files Authenticated Users - Modify - Subfolders and files only Authenticated Users - Create folders / append data - This folder only \Program Files Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to TrustedInstaller - Full control - This folder and subfolders SYSTEM - Modify - This folder only SYSTEM - Full control - Subfolders and files only Administrators - Modify - This folder only Administrators - Full control - Subfolders and files only Users - Read & execute - This folder, subfolders and files CREATOR OWNER - Full control - Subfolders and files only ALL APPLICATION PACKAGES - Read & execute - This folder, subfolders and files ALL RESTRICTED APPLICATION PACKAGES - Read & execute - This folder, subfolders and files \Windows Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to TrustedInstaller - Full control - This folder and subfolders SYSTEM - Modify - This folder only SYSTEM - Full control - Subfolders and files only Administrators - Modify - This folder only Administrators - Full control - Subfolders and files only Users - Read & execute - This folder, subfolders and files CREATOR OWNER - Full control - Subfolders and files only ALL APPLICATION PACKAGES - Read & execute - This folder, subfolders and files ALL RESTRICTED APPLICATION PACKAGES - Read & execute - This folder, subfolders and files Alternately use icacls. Run "CMD" as administrator. Enter "icacls" followed by the directory. icacls c:\ icacls "c:\program files" icacls c:\windows The following results will be displayed as each is entered: c:\ BUILTIN\Administrators:(OI)(CI)(F) NT AUTHORITY\SYSTEM:(OI)(CI)(F) BUILTIN\Users:(OI)(CI)(RX) NT AUTHORITY\Authenticated Users:(OI)(CI)(IO)(M) NT AUTHORITY\Authenticated Users:(AD) Mandatory Label\High Mandatory Level:(OI)(NP)(IO)(NW) Successfully processed 1 files; Failed processing 0 files c:\program files NT SERVICE\TrustedInstaller:(F) NT SERVICE\TrustedInstaller:(CI)(IO)(F) NT AUTHORITY\SYSTEM:(M) NT AUTHORITY\SYSTEM:(OI)(CI)(IO)(F) BUILTIN\Administrators:(M) BUILTIN\Administrators:(OI)(CI)(IO)(F) BUILTIN\Users:(RX) BUILTIN\Users:(OI)(CI)(IO)(GR,GE) CREATOR OWNER:(OI)(CI)(IO)(F) APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(RX) APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE) APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES:(RX) APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE) Successfully processed 1 files; Failed processing 0 files c:\windows NT SERVICE\TrustedInstaller:(F) NT SERVICE\TrustedInstaller:(CI)(IO)(F) NT AUTHORITY\SYSTEM:(M) NT AUTHORITY\SYSTEM:(OI)(CI)(IO)(F) BUILTIN\Administrators:(M) BUILTIN\Administrators:(OI)(CI)(IO)(F) BUILTIN\Users:(RX) BUILTIN\Users:(OI)(CI)(IO)(GR,GE) CREATOR OWNER:(OI)(CI)(IO)(F) APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(RX) APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE) APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES:(RX) APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE) Successfully processed 1 files; Failed processing 0 files

Fix: F-69295r1_fix

Maintain the default file system permissions and configure the Security Option: "Network access: Let everyone permissions apply to anonymous users" to "Disabled" (WN10-SO-000160).

Generate Mitigation Statement:

Checks: C-64113r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WinRM\Service\ Value Name: DisableRunAs Value Type: REG_DWORD Value: 1

Fix: F-69293r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Service >> "Disallow WinRM from storing RunAs credentials" to "Enabled".

Generate Mitigation Statement:

Checks: C-64121r1_chk

"SNMP" is not installed by default. Verify it has not been installed. Navigate to the Windows\System32 directory. If the "SNMP" application exists, this is a finding.

Fix: F-69301r1_fix

Uninstall "Simple Network Management Protocol (SNMP)" from the system. Run "Programs and Features". Select "Turn Windows Features on or off". De-select "Simple Network Management Protocol (SNMP)".

Generate Mitigation Statement:

Checks: C-64125r1_chk

"Simple TCP/IP Services" is not installed by default. Verify it has not been installed. Run "Services.msc". If "Simple TCP/IP Services" is listed, this is a finding.

Fix: F-69305r1_fix

Uninstall "Simple TCPIP Services (i.e. echo, daytime etc)" from the system. Run "Programs and Features". Select "Turn Windows Features on or off". De-select "Simple TCPIP Services (i.e. echo, daytime etc)".

Generate Mitigation Statement:

Checks: C-64127r1_chk

The "Telnet Client" is not installed by default. Verify it has not been installed. Navigate to the Windows\System32 directory. If the "telnet" application exists, this is a finding.

Fix: F-69307r1_fix

Uninstall "Telnet Client" from the system. Run "Programs and Features". Select "Turn Windows Features on or off". De-select "Telnet Client".

Generate Mitigation Statement:

Checks: C-64133r1_chk

The "TFTP Client" is not installed by default. Verify it has not been installed. Navigate to the Windows\System32 directory. If the "TFTP" application exists, this is a finding.

Fix: F-69313r1_fix

Uninstall "TFTP Client" from the system. Run "Programs and Features". Select "Turn Windows Features on or off". De-select "TFTP Client".

Generate Mitigation Statement:

Checks: C-64141r1_chk

Search all drives for *.p12 and *.pfx files. If any files with these extensions exist, this is a finding. This does not apply to server-based applications that have a requirement for .p12 certificate files (e.g., Oracle Wallet Manager). Some applications create files with extensions of .p12 that are NOT certificate installation files. Removal of non-certificate installation files from systems is not required. These must be documented with the ISSO.

Fix: F-69321r1_fix

Remove any certificate installation files (*.p12 and *.pfx) found on a system. Note: This does not apply to server-based applications that have a requirement for .p12 certificate files (e.g., Oracle Wallet Manager).

Generate Mitigation Statement:

Checks: C-64147r1_chk

Determine if a host-based firewall is installed and enabled on the system. If a host-based firewall is not installed and enabled on the system, this is a finding. The configuration requirements will be determined by the applicable firewall STIG.

Fix: F-69327r1_fix

Install and enable a host-based firewall on the system.

Generate Mitigation Statement:

Checks: C-64151r1_chk

Verify firewall exceptions to inbound connections on domain workstations include only authorized remote management hosts. If allowed inbound exceptions are not limited to authorized remote management hosts, this is a finding. Review inbound firewall exceptions. Computer Configuration >> Windows Settings >> Security Settings >> Windows Firewall with Advanced Security >> Windows Firewall with Advanced Security >> Inbound Rules (this link will be in the right pane) For any inbound rules that allow connections view the Scope for Remote IP address. This may be defined as an IP address, subnet, or range. The rule must apply to all firewall profiles. If a third-party firewall is used, ensure comparable settings are in place.

Fix: F-69331r1_fix

Configure firewall exceptions to inbound connections on domain workstations to include only authorized remote management hosts. Configure only inbound connection exceptions for authorized remote management hosts. Computer Configuration >> Windows Settings >> Security Settings >> Windows Firewall with Advanced Security >> Windows Firewall with Advanced Security >> Inbound Rules (this link will be in the right pane) For any inbound rules that allow connections, configure the Scope for Remote IP address to those of authorized remote management hosts. This may be defined as an IP address, subnet or range. Apply the rule to all firewall profiles. If a third-party firewall is used, configure inbound exceptions to only include authorized remote management hosts.

Generate Mitigation Statement:

Checks: C-74549r2_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy. If the "Account lockout duration" is less than "15" minutes (excluding "0"), this is a finding. Configuring this to "0", requiring an administrator to unlock the account, is more restrictive and is not a finding.

Fix: F-81277r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy >> "Account lockout duration" to "15" minutes or greater. A value of "0" is also acceptable, requiring an administrator to unlock the account.

Generate Mitigation Statement:

Checks: C-64157r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy. If the "Account lockout threshold" is "0" or more than "3" attempts, this is a finding.

Fix: F-69337r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy >> "Account lockout threshold" to "3" or less invalid logon attempts (excluding "0" which is unacceptable).

Generate Mitigation Statement:

Checks: C-64161r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy. If the "Reset account lockout counter after" value is less than "15" minutes, this is a finding.

Fix: F-69341r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy >> "Reset account lockout counter after" to "15" minutes.

Generate Mitigation Statement:

Checks: C-64163r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. If the value for "Enforce password history" is less than "24" passwords remembered, this is a finding.

Fix: F-69343r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> "Enforce password history" to "24" passwords remembered.

Generate Mitigation Statement:

Checks: C-64167r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. If the value for the "Maximum password age" is greater than "60" days, this is a finding. If the value is set to "0" (never expires), this is a finding.

Fix: F-69347r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> "Maximum Password Age" to "60" days or less (excluding "0" which is unacceptable).

Generate Mitigation Statement:

Checks: C-64169r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. If the value for the "Minimum password age" is less than "1" day, this is a finding.

Fix: F-69349r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> "Minimum Password Age" to at least "1" day.

Generate Mitigation Statement:

Checks: C-64171r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. If the value for the "Minimum password length," is less than "14" characters, this is a finding.

Fix: F-69351r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> "Minimum password length" to "14" characters.

Generate Mitigation Statement:

Checks: C-64175r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. If the value for "Password must meet complexity requirements" is not set to "Enabled", this is a finding. If the site is using a password filter that requires this setting be set to "Disabled" for the filter to be used, this would not be considered a finding.

Fix: F-69355r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> "Password must meet complexity requirements" to "Enabled".

Generate Mitigation Statement:

Checks: C-64181r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Account Logon >> Credential Validation - Failure

Fix: F-69359r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Logon >> "Audit Credential Validation" with "Failure" selected.

Generate Mitigation Statement:

Checks: C-64183r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Account Logon >> Credential Validation - Success

Fix: F-69363r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Logon >> "Audit Credential Validation" with "Success" selected.

Generate Mitigation Statement:

Checks: C-64189r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Account Management >> Other Account Management Events - Success

Fix: F-69369r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> "Audit Other Account Management Events" with "Success" selected.

Generate Mitigation Statement:

Checks: C-64193r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Account Management >> Security Group Management - Success

Fix: F-69373r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> "Audit Security Group Management" with "Success" selected.

Generate Mitigation Statement:

Checks: C-64195r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Account Management >> User Account Management - Failure

Fix: F-69375r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> "Audit User Account Management" with "Failure" selected.

Generate Mitigation Statement:

Checks: C-64197r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Account Management >> User Account Management - Success

Fix: F-69377r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> "Audit User Account Management" with "Success" selected.

Generate Mitigation Statement:

Checks: C-64199r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*" Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Detailed Tracking >> Plug and Play Events - Success

Fix: F-69379r1_fix

Computer Configuration >> Windows Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Detailed Tracking >> "Audit PNP Activity" with "Success" selected.

Generate Mitigation Statement:

Checks: C-64201r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Detailed Tracking >> Process Creation - Success

Fix: F-69381r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Detailed Tracking >> "Audit Process Creation" with "Success" selected.

Generate Mitigation Statement:

Checks: C-64203r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*" Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Logon/Logoff >> Account Lockout - Success

Fix: F-69383r3_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> "Audit Account Lockout" with "Success" selected.

Generate Mitigation Statement:

Checks: C-64205r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*" Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Logon/Logoff >> Group Membership - Success

Fix: F-69385r2_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> "Audit Group Membership" with "Success" selected.

Generate Mitigation Statement:

Checks: C-64207r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Logon/Logoff >> Logoff - Success

Fix: F-69387r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> "Audit Logoff" with "Success" selected.

Generate Mitigation Statement:

Checks: C-64211r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Logon/Logoff >> Logon - Failure

Fix: F-69391r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> "Audit Logon" with "Failure" selected.

Generate Mitigation Statement:

Checks: C-64215r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Logon/Logoff >> Logon - Success

Fix: F-69395r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> "Audit Logon" with "Success" selected.

Generate Mitigation Statement:

Checks: C-64219r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Logon/Logoff >> Special Logon - Success

Fix: F-69399r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> "Audit Special Logon" with "Success" selected.

Generate Mitigation Statement:

Checks: C-79559r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*" Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Object Access >> Removable Storage - Failure Some virtual machines may generate excessive audit events for access to the virtual hard disk itself when this setting is enabled. This may be set to Not Configured in such cases and would not be a finding. This must be documented with the ISSO to include mitigations such as monitoring or restricting any actual removable storage connected to the VM.

Fix: F-69401r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Object Access >> "Audit Removable Storage" with "Failure" selected.

Generate Mitigation Statement:

Checks: C-79561r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*" Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Object Access >> Removable Storage - Success Some virtual machines may generate excessive audit events for access to the virtual hard disk itself when this setting is enabled. This may be set to Not Configured in such cases and would not be a finding. This must be documented with the ISSO to include mitigations such as monitoring or restricting any actual removable storage connected to the VM.

Fix: F-69403r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Object Access >> "Audit Removable Storage" with "Success" selected.

Generate Mitigation Statement:

Checks: C-64225r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Policy Change >> Audit Policy Change - Failure

Fix: F-69405r2_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Policy Change >> "Audit Audit Policy Change" with "Failure" selected.

Generate Mitigation Statement:

Checks: C-64229r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Policy Change >> Audit Policy Change - Success

Fix: F-69409r2_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Policy Change >> "Audit Audit Policy Change" with "Success" selected.

Generate Mitigation Statement:

Checks: C-64231r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Policy Change >> Authentication Policy Change - Success

Fix: F-69411r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Policy Change >> "Audit Authentication Policy Change" with "Success" selected.

Generate Mitigation Statement:

Checks: C-64235r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Privilege Use >> Sensitive Privilege Use - Failure

Fix: F-69413r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Privilege Use >> "Audit Sensitive Privilege Use" with "Failure" selected.

Generate Mitigation Statement:

Checks: C-64237r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: Privilege Use >> Sensitive Privilege Use - Success

Fix: F-69417r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Privilege Use >> "Audit Sensitive Privilege Use" with "Success" selected.

Generate Mitigation Statement:

Checks: C-64241r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: System >> IPSec Driver - Failure

Fix: F-69421r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> "Audit IPSec Driver" with "Failure" selected.

Generate Mitigation Statement:

Checks: C-64245r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding:" System >> IPSec Driver - Success

Fix: F-69425r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> "Audit IPSec Driver" with "Success" selected.

Generate Mitigation Statement:

Checks: C-64249r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*" Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: System >> Other System Events - Success

Fix: F-69429r2_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> "Audit Other System Events" with "Success" selected.

Generate Mitigation Statement:

Checks: C-64253r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*" Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: System >> Other System Events - Failure

Fix: F-69433r2_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> "Audit Other System Events" with "Failure" selected.

Generate Mitigation Statement:

Checks: C-64257r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: System >> Security State Change - Success

Fix: F-69437r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> "Audit Security State Change" with "Success" selected.

Generate Mitigation Statement:

Checks: C-64263r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: System >> Security System Extension - Success

Fix: F-69443r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> "Audit Security System Extension" with "Success" selected.

Generate Mitigation Statement:

Checks: C-64265r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: System >> System Integrity - Failure

Fix: F-69445r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> "Audit System Integrity" with "Failure" selected.

Generate Mitigation Statement:

Checks: C-64267r1_chk

Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN10-SO-000030) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open a Command Prompt with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding: System >> System Integrity - Success

Fix: F-69447r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> "Audit System Integrity" with "Success" selected.

Generate Mitigation Statement:

Checks: C-64269r1_chk

If the system is configured to send audit records directly to an audit server, this is NA. This must be documented with the ISSO. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\EventLog\Application\ Value Name: MaxSize Value Type: REG_DWORD Value: 0x00008000 (32768) (or greater)

Fix: F-69449r1_fix

If the system is configured to send audit records directly to an audit server, this is NA. This must be documented with the ISSO. Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Event Log Service >> Application >> "Specify the maximum log file size (KB)" to "Enabled" with a "Maximum Log Size (KB)" of "32768" or greater.

Generate Mitigation Statement:

Checks: C-79597r1_chk

If the system is configured to send audit records directly to an audit server, this is NA. This must be documented with the ISSO. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\EventLog\Security\ Value Name: MaxSize Value Type: REG_DWORD Value: 0x000fa000 (1024000) (or greater)

Fix: F-86735r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Event Log Service >> Security >> "Specify the maximum log file size (KB)" to "Enabled" with a "Maximum Log Size (KB)" of "1024000" or greater. If the system is configured to send audit records directly to an audit server, documented with the ISSO.

Generate Mitigation Statement:

Checks: C-64277r1_chk

If the system is configured to send audit records directly to an audit server, this is NA. This must be documented with the ISSO. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\EventLog\System\ Value Name: MaxSize Value Type: REG_DWORD Value: 0x00008000 (32768) (or greater)

Fix: F-69457r1_fix

If the system is configured to send audit records directly to an audit server, this is NA. This must be documented with the ISSO. Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Event Log Service >> System >> "Specify the maximum log file size (KB)" to "Enabled" with a "Maximum Log Size (KB)" of "32768" or greater.

Generate Mitigation Statement:

Checks: C-64283r1_chk

Verify the permissions on the Application event log (Application.evtx). Standard user accounts or groups must not have access. The default permissions listed below satisfy this requirement. Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\SYSTEM32\WINEVT\LOGS" directory. They may have been moved to another folder. If the permissions for these files are not as restrictive as the ACLs listed, this is a finding.

Fix: F-69463r1_fix

Ensure the permissions on the Application event log (Application.evtx) are configured to prevent standard user accounts or groups from having access. The default permissions listed below satisfy this requirement. Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\SYSTEM32\WINEVT\LOGS" directory. If the location of the logs has been changed, when adding Eventlog to the permissions, it must be entered as "NT Service\Eventlog".

Generate Mitigation Statement:

Checks: C-64287r1_chk

Verify the permissions on the Security event log (Security.evtx). Standard user accounts or groups must not have access. The default permissions listed below satisfy this requirement. Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\SYSTEM32\WINEVT\LOGS" directory. They may have been moved to another folder. If the permissions for these files are not as restrictive as the ACLs listed, this is a finding.

Fix: F-69467r1_fix

Ensure the permissions on the Security event log (Security.evtx) are configured to prevent standard user accounts or groups from having access. The default permissions listed below satisfy this requirement. Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\SYSTEM32\WINEVT\LOGS" directory. If the location of the logs has been changed, when adding Eventlog to the permissions, it must be entered as "NT Service\Eventlog".

Generate Mitigation Statement:

Checks: C-64291r1_chk

Verify the permissions on the System event log (System.evtx). Standard user accounts or groups must not have access. The default permissions listed below satisfy this requirement. Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\SYSTEM32\WINEVT\LOGS" directory. They may have been moved to another folder. If the permissions for these files are not as restrictive as the ACLs listed, this is a finding.

Fix: F-69471r1_fix

Ensure the permissions on the System event log (System.evtx) are configured to prevent standard user accounts or groups from having access. The default permissions listed below satisfy this requirement. Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\SYSTEM32\WINEVT\LOGS" directory. If the location of the logs has been changed, when adding Eventlog to the permissions, it must be entered as "NT Service\Eventlog".

Generate Mitigation Statement:

Checks: C-64295r1_chk

If the device does not have a camera, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Personalization\ Value Name: NoLockScreenCamera Value Type: REG_DWORD Value: 1

Fix: F-69475r1_fix

If the device does not have a camera, this is NA. Configure the policy value for Computer Configuration >> Administrative Templates >> Control Panel >> Personalization >> "Prevent enabling lock screen camera" to "Enabled".

Generate Mitigation Statement:

Checks: C-64299r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Personalization\ Value Name: NoLockScreenSlideshow Value Type: REG_DWORD Value: 1

Fix: F-69479r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Control Panel >> Personalization >> "Prevent enabling lock screen slide show" to "Enabled".

Generate Mitigation Statement:

Checks: C-64305r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\ Value Name: DisableIpSourceRouting Value Type: REG_DWORD Value: 2

Fix: F-69485r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> MSS (Legacy) >> "MSS: (DisableIPSourceRouting IPv6) IP source routing protection level (protects against packet spoofing)" to "Highest protection, source routing is completely disabled". This policy setting requires the installation of the MSS-Legacy custom templates included with the STIG package. "MSS-Legacy.admx" and " MSS-Legacy.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.

Generate Mitigation Statement:

Checks: C-64309r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\ Value Name: DisableIPSourceRouting Value Type: REG_DWORD Value: 2

Fix: F-69489r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> MSS (Legacy) >> "MSS: (DisableIPSourceRouting) IP source routing protection level (protects against packet spoofing)" to "Highest protection, source routing is completely disabled". This policy setting requires the installation of the MSS-Legacy custom templates included with the STIG package. "MSS-Legacy.admx" and " MSS-Legacy.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.

Generate Mitigation Statement:

Checks: C-81357r2_chk

Windows 10 v1507 LTSB version does not include this setting; it is NA for those systems. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\LanmanWorkstation\ Value Name: AllowInsecureGuestAuth Type: REG_DWORD Value: 0x00000000 (0)

Fix: F-69499r2_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Network >> Lanman Workstation >> "Enable insecure guest logons" to "Disabled".

Generate Mitigation Statement:

Checks: C-64327r1_chk

This requirement is applicable to domain-joined systems, for standalone systems this is NA. If the following registry values do not exist or are not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\NetworkProvider\HardenedPaths\ Value Name: \\*\NETLOGON Value Type: REG_SZ Value: RequireMutualAuthentication=1, RequireIntegrity=1 Value Name: \\*\SYSVOL Value Type: REG_SZ Value: RequireMutualAuthentication=1, RequireIntegrity=1 Additional entries would not be a finding.

Fix: F-69507r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Network >> Network Provider >> "Hardened UNC Paths" to "Enabled" with at least the following configured in "Hardened UNC Paths:" (click the "Show" button to display). Value Name: \\*\SYSVOL Value: RequireMutualAuthentication=1, RequireIntegrity=1 Value Name: \\*\NETLOGON Value: RequireMutualAuthentication=1, RequireIntegrity=1

Generate Mitigation Statement:

Checks: C-80175r4_chk

Verify the DoD Root CA certificates are installed as Trusted Root Certification Authorities. The certificates and thumbprints referenced below apply to unclassified systems; see PKE documentation for other networks. Run "PowerShell" as an administrator. Execute the following command: Get-ChildItem -Path Cert:Localmachine\root | Where Subject -Like "*DoD*" | FL Subject, Thumbprint, NotAfter If the following certificate "Subject" and "Thumbprint" information is not displayed, this is finding. If an expired certificate ("NotAfter" date) is not listed in the results, this is not a finding. Subject: CN=DoD Root CA 2, OU=PKI, OU=DoD, O=U.S. Government, C=US Thumbprint: 8C941B34EA1EA6ED9AE2BC54CF687252B4C9B561 NotAfter: 12/5/2029 Subject: CN=DoD Root CA 3, OU=PKI, OU=DoD, O=U.S. Government, C=US Thumbprint: D73CA91102A2204A36459ED32213B467D7CE97FB NotAfter: 12/30/2029 Subject: CN=DoD Root CA 4, OU=PKI, OU=DoD, O=U.S. Government, C=US Thumbprint: B8269F25DBD937ECAFD4C35A9838571723F2D026 NotAfter: 7/25/2032 Subject: CN=DoD Root CA 5, OU=PKI, OU=DoD, O=U.S. Government, C=US Thumbprint: 4ECB5CC3095670454DA1CBD410FC921F46B8564B NotAfter: 6/14/2041 Alternately use the Certificates MMC snap-in: Run "MMC". Select "File", "Add/Remove Snap-in". Select "Certificates", click "Add". Select "Computer account", click "Next". Select "Local computer: (the computer this console is running on)", click "Finish". Click "OK". Expand "Certificates" and navigate to "Trusted Root Certification Authorities >> Certificates". For each of the DoD Root CA certificates noted below: Right-click on the certificate and select "Open". Select the "Details" Tab. Scroll to the bottom and select "Thumbprint". If the DoD Root CA certificates below are not listed or the value for the "Thumbprint" field is not as noted, this is a finding. If an expired certificate ("Valid to" date) is not listed in the results, this is not a finding. DoD Root CA 2 Thumbprint: 8C941B34EA1EA6ED9AE2BC54CF687252B4C9B561 Valid to: Wednesday, December 5, 2029 DoD Root CA 3 Thumbprint: D73CA91102A2204A36459ED32213B467D7CE97FB Valid to: Sunday, December 30, 2029 DoD Root CA 4 Thumbprint: B8269F25DBD937ECAFD4C35A9838571723F2D026 Valid to: Sunday, July 25, 2032 DoD Root CA 5 Thumbprint: 4ECB5CC3095670454DA1CBD410FC921F46B8564B Valid to: Friday, June 14, 2041

Fix: F-87307r1_fix

Install the DoD Root CA certificates. DoD Root CA 2 DoD Root CA 3 DoD Root CA 4 DoD Root CA 5 The InstallRoot tool is available on IASE at http://iase.disa.mil/pki-pke/Pages/tools.aspx.

Generate Mitigation Statement:

Checks: C-64331r1_chk

The default behavior for "Minimize the number of simultaneous connections to the Internet or a Windows Domain" is "Enabled". If the registry value name below does not exist, this is not a finding. If it exists and is configured with a value of "1", this is not a finding. If it exists and is configured with a value of "0", this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WcmSvc\GroupPolicy\ Value Name: fMinimizeConnections Value Type: REG_DWORD Value: 1 (or if the Value Name does not exist)

Fix: F-69511r1_fix

The default behavior for "Minimize the number of simultaneous connections to the Internet or a Windows Domain" is "Enabled". If this needs to be corrected, configure the policy value for Computer Configuration >> Administrative Templates >> Network >> Windows Connection Manager >> "Minimize the number of simultaneous connections to the Internet or a Windows Domain" to "Enabled".

Generate Mitigation Statement:

Checks: C-80177r4_chk

Verify the ECA Root CA certificates are installed on unclassified systems as Trusted Root Certification Authorities. Run "PowerShell" as an administrator. Execute the following command: Get-ChildItem -Path Cert:Localmachine\root | Where Subject -Like "*ECA*" | FL Subject, Thumbprint, NotAfter If the following certificate "Subject" and "Thumbprint" information is not displayed, this is finding. If an expired certificate ("NotAfter" date) is not listed in the results, this is not a finding. Subject: CN=ECA Root CA 2, OU=ECA, O=U.S. Government, C=US Thumbprint: C313F919A6ED4E0E8451AFA930FB419A20F181E4 NotAfter: 3/30/2028 Subject: CN=ECA Root CA 4, OU=ECA, O=U.S. Government, C=US Thumbprint: 73E8BB08E337D6A5A6AEF90CFFDD97D9176CB582 NotAfter: 12/30/2029 Alternately use the Certificates MMC snap-in: Run "MMC". Select "File", "Add/Remove Snap-in". Select "Certificates", click "Add". Select "Computer account", click "Next". Select "Local computer: (the computer this console is running on)", click "Finish". Click "OK". Expand "Certificates" and navigate to "Trusted Root Certification Authorities >> Certificates". For each of the ECA Root CA certificates noted below: Right-click on the certificate and select "Open". Select the "Details" Tab. Scroll to the bottom and select "Thumbprint". If the ECA Root CA certificates below are not listed or the value for the "Thumbprint" field is not as noted, this is a finding. If an expired certificate ("Valid to" date) is not listed in the results, this is not a finding. ECA Root CA 2 Thumbprint: C313F919A6ED4E0E8451AFA930FB419A20F181E4 Valid to: Thursday, March 30, 2028 ECA Root CA 4 Thumbprint: 73E8BB08E337D6A5A6AEF90CFFDD97D9176CB582 Valid to: Sunday, December 30, 2029

Fix: F-76981r2_fix

Install the ECA Root CA certificates on unclassified systems. ECA Root CA 2 ECA Root CA 4 The InstallRoot tool is available on IASE at http://iase.disa.mil/pki-pke/Pages/tools.aspx.

Generate Mitigation Statement:

Checks: C-64335r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WcmSvc\GroupPolicy\ Value Name: fBlockNonDomain Value Type: REG_DWORD Value: 1

Fix: F-69515r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Network >> Windows Connection Manager >> "Prohibit connection to non-domain networks when connected to domain authenticated network" to "Enabled".

Generate Mitigation Statement:

Checks: C-80179r4_chk

Verify the DoD Interoperability cross-certificates are installed on unclassified systems as Untrusted Certificates. Run "PowerShell" as an administrator. Execute the following command: Get-ChildItem -Path Cert:Localmachine\disallowed | Where {$_.Issuer -Like "*DoD Interoperability*" -and $_.Subject -Like "*DoD*"} | FL Subject, Issuer, Thumbprint, NotAfter If the following certificate "Subject", "Issuer", and "Thumbprint", information is not displayed, this is finding. If an expired certificate ("NotAfter" date) is not listed in the results, this is not a finding. Subject: CN=DoD Root CA 2, OU=PKI, OU=DoD, O=U.S. Government, C=US Issuer: CN=DoD Interoperability Root CA 1, OU=PKI, OU=DoD, O=U.S. Government, C=US Thumbprint: 22BBE981F0694D246CC1472ED2B021DC8540A22F NotAfter: 9/6/2019 Subject: CN=DoD Root CA 3, OU=PKI, OU=DoD, O=U.S. Government, C=US Issuer: CN=DoD Interoperability Root CA 2, OU=PKI, OU=DoD, O=U.S. Government, C=US Thumbprint: FFAD03329B9E527A43EEC66A56F9CBB5393E6E13 NotAfter: 9/23/2018 Subject: CN=DoD Root CA 3, OU=PKI, OU=DoD, O=U.S. Government, C=US Issuer: CN=DoD Interoperability Root CA 2, OU=PKI, OU=DoD, O=U.S. Government, C=US Thumbprint: FCE1B1E25374DD94F5935BEB86CA643D8C8D1FF4 NotAfter: 2/17/2019 Alternately use the Certificates MMC snap-in: Run "MMC". Select "File", "Add/Remove Snap-in". Select "Certificates", click "Add". Select "Computer account", click "Next". Select "Local computer: (the computer this console is running on)", click "Finish". Click "OK". Expand "Certificates" and navigate to "Untrusted Certificates >> Certificates". For each certificate with "DoD Root CA…" under "Issued To" and "DoD Interoperability Root CA…" under "Issued By": Right-click on the certificate and select "Open". Select the "Details" Tab. Scroll to the bottom and select "Thumbprint". If the certificates below are not listed or the value for the "Thumbprint" field is not as noted, this is a finding. If an expired certificate ("Valid to" date) is not listed in the results, this is not a finding. Issued To: DoD Root CA 2 Issued By: DoD Interoperability Root CA 1 Thumbprint: 22BBE981F0694D246CC1472ED2B021DC8540A22F Valid to: Friday, September 6, 2019 Issued To: DoD Root CA 3 Issued By: DoD Interoperability Root CA 2 Thumbprint: FFAD03329B9E527A43EEC66A56F9CBB5393E6E13 Valid to: Sunday, September 23, 2018 Issued To: DoD Root CA 3 Issued By: DoD Interoperability Root CA 2 Thumbprint: FCE1B1E25374DD94F5935BEB86CA643D8C8D1FF4 Valid to: Sunday, February 17, 2019

Fix: F-78951r1_fix

Install the DoD Interoperability Root CA cross-certificates on unclassified systems. Issued To - Issued By - Thumbprint DoD Root CA 2 - DoD Interoperability Root CA 1 - 22BBE981F0694D246CC1472ED2B021DC8540A22F DoD Root CA 3 - DoD Interoperability Root CA 2 - FFAD03329B9E527A43EEC66A56F9CBB5393E6E13 DoD Root CA 3 - DoD Interoperability Root CA 2 - FCE1B1E25374DD94F5935BEB86CA643D8C8D1FF4 Administrators should run the Federal Bridge Certification Authority (FBCA) Cross-Certificate Removal Tool once as an administrator and once as the current user. The FBCA Cross-Certificate Remover tool and user guide is available on IASE at http://iase.disa.mil/pki-pke/Pages/tools.aspx.

Generate Mitigation Statement:

Checks: C-80181r4_chk

Verify the US DoD CCEB Interoperability Root CA cross-certificate is installed on unclassified systems as an Untrusted Certificate. Run "PowerShell" as an administrator. Execute the following command: Get-ChildItem -Path Cert:Localmachine\disallowed | Where Issuer -Like "*CCEB Interoperability*" | FL Subject, Issuer, Thumbprint, NotAfter If the following certificate "Subject", "Issuer", and "Thumbprint", information is not displayed, this is finding. If an expired certificate ("NotAfter" date) is not listed in the results, this is not a finding. Subject: CN=DoD Root CA 2, OU=PKI, OU=DoD, O=U.S. Government, C=US Issuer: CN=US DoD CCEB Interoperability Root CA 1, OU=PKI, OU=DoD, O=U.S. Government, C=US Thumbprint: DA36FAF56B2F6FBA1604F5BE46D864C9FA013BA3 NotAfter: 3/9/2019 Subject: CN=DoD Root CA 3, OU=PKI, OU=DoD, O=U.S. Government, C=US Issuer: CN=US DoD CCEB Interoperability Root CA 2, OU=PKI, OU=DoD, O=U.S. Government, C=US Thumbprint: 929BF3196896994C0A201DF4A5B71F603FEFBF2E NotAfter: 9/27/2019 Alternately use the Certificates MMC snap-in: Run "MMC". Select "File", "Add/Remove Snap-in". Select "Certificates", click "Add". Select "Computer account", click "Next". Select "Local computer: (the computer this console is running on)", click "Finish". Click "OK". Expand "Certificates" and navigate to "Untrusted Certificates >> Certificates". For each certificate with "US DoD CCEB Interoperability Root CA …" under "Issued By": Right-click on the certificate and select "Open". Select the "Details" Tab. Scroll to the bottom and select "Thumbprint". If the certificate below is not listed or the value for the "Thumbprint" field is not as noted, this is a finding. If an expired certificate ("Valid to" date) is not listed in the results, this is not a finding. Issued To: DoD Root CA 2 Issued By: US DoD CCEB Interoperability Root CA 1 Thumbprint: DA36FAF56B2F6FBA1604F5BE46D864C9FA013BA3 Valid to: Saturday, March 9, 2019 Issued To: DoD Root CA 3 Issuer by: US DoD CCEB Interoperability Root CA 2 Thumbprint: 929BF3196896994C0A201DF4A5B71F603FEFBF2E Valid: Friday, September 27, 2019

Fix: F-87309r1_fix

Install the US DoD CCEB Interoperability Root CA cross-certificate on unclassified systems. Issued To - Issued By - Thumbprint DoD Root CA 2 - US DoD CCEB Interoperability Root CA 1 - DA36FAF56B2F6FBA1604F5BE46D864C9FA013BA3 DoD Root CA 3 - US DoD CCEB Interoperability Root CA 2 - 929BF3196896994C0A201DF4A5B71F603FEFBF2E Administrators should run the Federal Bridge Certification Authority (FBCA) Cross-Certificate Removal Tool once as an administrator and once as the current user. The FBCA Cross-Certificate Remover tool and user guide is available on IASE at http://iase.disa.mil/pki-pke/Pages/tools.aspx.

Generate Mitigation Statement:

Checks: C-81355r2_chk

This is NA as of v1803 of Windows 10; Wi-Fi sense is no longer available. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\WcmSvc\wifinetworkmanager\config\ Value Name: AutoConnectAllowedOEM Type: REG_DWORD Value: 0x00000000 (0)

Fix: F-88431r2_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Network >> WLAN Service >> WLAN Settings>> "Allow Windows to automatically connect to suggested open hotspots, to networks shared by contacts, and to hotspots offering paid services" to "Disabled". v1507 LTSB does not include this group policy setting. It may be configured through other means such as using group policy from a later version of Windows 10 or a registry update.

Generate Mitigation Statement:

Checks: C-64343r1_chk

Verify the default registry permissions for the keys note below of the HKEY_LOCAL_MACHINE hive. If any non-privileged groups such as Everyone, Users or Authenticated Users have greater than Read permission, this is a finding. Run "Regedit". Right click on the registry areas noted below. Select "Permissions..." and the "Advanced" button. HKEY_LOCAL_MACHINE\SECURITY Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to SYSTEM - Full Control - This key and subkeys Administrators - Special - This key and subkeys HKEY_LOCAL_MACHINE\SOFTWARE Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to Users - Read - This key and subkeys Administrators - Full Control - This key and subkeys SYSTEM - Full Control - This key and subkeys CREATOR OWNER - Full Control - This key and subkeys ALL APPLICATION PACKAGES - Read - This key and subkeys HKEY_LOCAL_MACHINE\SYSTEM Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to Users - Read - This key and subkeys Administrators - Full Control - This key and subkeys SYSTEM - Full Control - This key and subkeys CREATOR OWNER - Full Control - This key and subkeys ALL APPLICATION PACKAGES - Read - This key and subkeys Other samples under the noted keys may also be sampled. There may be some instances where non-privileged groups have greater than Read permission. If the defaults have not been changed, these are not a finding.

Fix: F-69523r1_fix

Maintain the default permissions for the HKEY_LOCAL_MACHINE registry hive. The default permissions of the higher level keys are noted below. HKEY_LOCAL_MACHINE\SECURITY Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to SYSTEM - Full Control - This key and subkeys Administrators - Special - This key and subkeys HKEY_LOCAL_MACHINE\SOFTWARE Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to Users - Read - This key and subkeys Administrators - Full Control - This key and subkeys SYSTEM - Full Control - This key and subkeys CREATOR OWNER - Full Control - This key and subkeys ALL APPLICATION PACKAGES - Read - This key and subkeys HKEY_LOCAL_MACHINE\SYSTEM Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to Users - Read - This key and subkeys Administrators - Full Control - This key and subkeys SYSTEM - Full Control - This key and subkeys CREATOR OWNER - Full Control - This key and subkeys ALL APPLICATION PACKAGES - Read - This key and subkeys

Generate Mitigation Statement:

Checks: C-72029r1_chk

If the system is not a member of a domain, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: LocalAccountTokenFilterPolicy Value Type: REG_DWORD Value: 0x00000000 (0)

Fix: F-78099r3_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> MS Security Guide >> "Apply UAC restrictions to local accounts on network logons" to "Enabled". This policy setting requires the installation of the SecGuide custom templates included with the STIG package. "SecGuide.admx" and "SecGuide.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.

Generate Mitigation Statement:

Checks: C-64351r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options. If the value for "Accounts: Administrator account status" is not set to "Disabled", this is a finding.

Fix: F-69531r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Accounts: Administrator account status" to "Disabled".

Generate Mitigation Statement:

Checks: C-64357r1_chk

The default behavior is for Early Launch Antimalware - Boot-Start Driver Initialization policy is to enforce "Good, unknown and bad but critical" (preventing "bad"). If the registry value name below does not exist, this is not a finding. If it exists and is configured with a value of "7", this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Policies\EarlyLaunch\ Value Name: DriverLoadPolicy Value Type: REG_DWORD Value: 1, 3, or 8 (or if the Value Name does not exist) Possible values for this setting are: 8 - Good only 1 - Good and unknown 3 - Good, unknown and bad but critical 7 - All (which includes "Bad" and would be a finding)

Fix: F-69537r1_fix

The default behavior is for Early Launch Antimalware - Boot-Start Driver Initialization policy is to enforce "Good, unknown and bad but critical" (preventing "bad"). If this needs to be corrected or a more secure setting is desired, configure the policy value for Computer Configuration >> Administrative Templates >> System >> Early Launch Antimalware >> "Boot-Start Driver Initialization Policy" to "Not Configured" or "Enabled" with any option other than "All" selected.

Generate Mitigation Statement:

Checks: C-64359r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Group Policy\{35378EAC-683F-11D2-A89A-00C04FBBCFA2} Value Name: NoGPOListChanges Value Type: REG_DWORD Value: 0

Fix: F-69539r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Group Policy >> "Configure registry policy processing" to "Enabled" and select the option "Process even if the Group Policy objects have not changed".

Generate Mitigation Statement:

Checks: C-64361r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options. If the value for "Accounts: Guest account status" is not set to "Disabled", this is a finding.

Fix: F-69541r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Accounts: Guest account status" to "Disabled".

Generate Mitigation Statement:

Checks: C-64365r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows NT\Printers\ Value Name: DisableWebPnPDownload Value Type: REG_DWORD Value: 1

Fix: F-69545r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Internet Communication Management >> Internet Communication settings >> "Turn off downloading of print drivers over HTTP" to "Enabled".

Generate Mitigation Statement:

Checks: C-64367r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\ Value Name: LimitBlankPasswordUse Value Type: REG_DWORD Value: 1

Fix: F-69547r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Accounts: Limit local account use of blank passwords to console logon only" to "Enabled".

Generate Mitigation Statement:

Checks: C-64371r2_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options. If the value for "Accounts: Rename administrator account" is set to "Administrator", this is a finding.

Fix: F-69551r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Accounts: Rename administrator account" to a name other than "Administrator".

Generate Mitigation Statement:

Checks: C-64369r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer\ Value Name: NoWebServices Value Type: REG_DWORD Value: 1

Fix: F-69549r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Internet Communication Management >> Internet Communication settings >> "Turn off Internet download for Web publishing and online ordering wizards" to "Enabled".

Generate Mitigation Statement:

Checks: C-64373r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows NT\Printers\ Value Name: DisableHTTPPrinting Value Type: REG_DWORD Value: 1

Fix: F-69553r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Internet Communication Management >> Internet Communication settings >> "Turn off printing over HTTP" to "Enabled".

Generate Mitigation Statement:

Checks: C-64375r1_chk

Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options. If the value for "Accounts: Rename guest account" is set to "Guest", this is a finding.

Fix: F-69555r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Accounts: Rename guest account" to a name other than "Guest".

Generate Mitigation Statement:

Checks: C-64377r1_chk

This requirement is applicable to domain-joined systems, for standalone systems this is NA. The default behavior for "Support device authentication using certificate" is "Automatic". If the registry value name below does not exist, this is not a finding. If it exists and is configured with a value of "1", this is not a finding. If it exists and is configured with a value of "0", this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\Kerberos\Parameters\ Value Name: DevicePKInitEnabled Value Type: REG_DWORD Value: 1 (or if the Value Name does not exist)

Fix: F-69557r1_fix

This requirement is applicable to domain-joined systems, for standalone systems this is NA. The default behavior for "Support device authentication using certificate" is "Automatic". If this needs to be corrected, configured the policy value for Computer Configuration >> Administrative Templates >> System >> Kerberos >> "Support device authentication using certificate" to "Not Configured or "Enabled" with either option selected in "Device authentication behavior using certificate:".

Generate Mitigation Statement:

Checks: C-64379r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\System\ Value Name: DontDisplayNetworkSelectionUI Value Type: REG_DWORD Value: 1

Fix: F-69559r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Logon >> "Do not display network selection UI" to "Enabled".

Generate Mitigation Statement:

Checks: C-64385r1_chk

This requirement is applicable to domain-joined systems, for standalone systems this is NA. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\System\ Value Name: EnumerateLocalUsers Value Type: REG_DWORD Value: 0

Fix: F-69565r1_fix

This requirement is applicable to domain-joined systems, for standalone systems this is NA. Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Logon >> "Enumerate local users on domain-joined computers" to "Disabled".

Generate Mitigation Statement:

Checks: C-64383r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\ Value Name: SCENoApplyLegacyAuditPolicy Value Type: REG_DWORD Value: 1

Fix: F-69563r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" to "Enabled".

Generate Mitigation Statement:

Checks: C-64389r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: RequireSignOrSeal Value Type: REG_DWORD Value: 1

Fix: F-69567r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Domain member: Digitally encrypt or sign secure channel data (always)" to "Enabled".

Generate Mitigation Statement:

Checks: C-64393r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: SealSecureChannel Value Type: REG_DWORD Value: 1

Fix: F-69573r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Domain member: Digitally encrypt secure channel data (when possible)" to "Enabled".

Generate Mitigation Statement:

Checks: C-64395r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Power\PowerSettings\0e796bdb-100d-47d6-a2d5-f7d2daa51f51\ Value Name: DCSettingIndex Value Type: REG_DWORD Value: 1

Fix: F-69575r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Power Management >> Sleep Settings >> "Require a password when a computer wakes (on battery)" to "Enabled".

Generate Mitigation Statement:

Checks: C-64397r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: SignSecureChannel Value Type: REG_DWORD Value: 1

Fix: F-69577r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Domain member: Digitally sign secure channel data (when possible)" to "Enabled".

Generate Mitigation Statement:

Checks: C-64399r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Power\PowerSettings\0e796bdb-100d-47d6-a2d5-f7d2daa51f51\ Value Name: ACSettingIndex Value Type: REG_DWORD Value: 1

Fix: F-69579r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Power Management >> Sleep Settings >> "Require a password when a computer wakes (plugged in)" to "Enabled".

Generate Mitigation Statement:

Checks: C-64405r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows NT\Rpc\ Value Name: RestrictRemoteClients Value Type: REG_DWORD Value: 1

Fix: F-69585r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Remote Procedure Call >> "Restrict Unauthenticated RPC clients" to "Enabled" and "Authenticated".

Generate Mitigation Statement:

Checks: C-64413r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: RequireStrongKey Value Type: REG_DWORD Value: 1 Warning: This setting may prevent a system from being joined to a domain if not configured consistently between systems.

Fix: F-69593r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Domain member: Require strong (Windows 2000 or Later) session key" to "Enabled".

Generate Mitigation Statement:

Checks: C-81353r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: InactivityTimeoutSecs Value Type: REG_DWORD Value: 0x00000384 (900) (or less, excluding "0" which is effectively disabled)

Fix: F-88429r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Interactive logon: Machine inactivity limit" to "900" seconds" or less, excluding "0" which is effectively disabled.

Generate Mitigation Statement:

Checks: C-64421r2_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: LegalNoticeText Value Type: REG_SZ Value: You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.

Fix: F-69601r2_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Interactive logon: Message text for users attempting to log on" to the following. You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.

Generate Mitigation Statement:

Checks: C-81361r2_chk

Windows 10 v1507 LTSB version does not include this setting; it is NA for those systems. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Biometrics\FacialFeatures\ Value Name: EnhancedAntiSpoofing Value Type: REG_DWORD Value: 0x00000001 (1)

Fix: F-88435r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Biometrics >> Facial Features >> "Configure enhanced anti-spoofing" to "Enabled". v1607: The policy name is "Use enhanced anti-spoofing when available".

Generate Mitigation Statement:

Checks: C-64429r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\CredUI\ Value Name: EnumerateAdministrators Value Type: REG_DWORD Value: 0

Fix: F-69607r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Credential User Interface >> "Enumerate administrator accounts on elevation" to "Disabled".

Generate Mitigation Statement:

Checks: C-81949r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\DataCollection\ Value Name: AllowTelemetry Type: REG_DWORD Value: 0x00000000 (0) (Security) 0x00000001 (1) (Basic) If an organization is using v1709 or later of Windows 10 this may be configured to "Enhanced" to support Windows Analytics. V-82145 must also be configured to limit the Enhanced diagnostic data to the minimum required by Windows Analytics. This registry value will then be 0x00000002 (2).

Fix: F-89003r2_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Data Collection and Preview Builds >> "Allow Telemetry" to "Enabled" with "0 - Security [Enterprise Only]" or "1 - Basic" selected in "Options:". If an organization is using v1709 or later of Windows 10 this may be configured to "2 - Enhanced" to support Windows Analytics. V-82145 must also be configured to limit the Enhanced diagnostic data to the minimum required by Windows Analytics.

Generate Mitigation Statement:

Checks: C-77533r3_chk

This is applicable to unclassified systems, for other systems this is NA. If the following registry values do not exist or are not configured as specified, this is a finding: v1703 and later of Windows 10: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\System\ Value Name: EnableSmartScreen Value Type: REG_DWORD Value: 0x00000001 (1) And Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\System\ Value Name: ShellSmartScreenLevel Value Type: REG_SZ Value: Block v1607 of Windows 10: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\System\ Value Name: EnableSmartScreen Value Type: REG_DWORD Value: 0x00000001 (1) v1507 LTSB: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\System\ Value Name: EnableSmartScreen Value Type: REG_DWORD Value: 0x00000002 (2)

Fix: F-84615r2_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> File Explorer >> "Configure Windows Defender SmartScreen" to "Enabled" with "Warn and prevent bypass" selected. v1703 and later of Windows 10 include duplicate policies for this setting. It can also be configured under Computer Configuration >> Administrative Templates >> Windows Components >> Windows Defender SmartScreen >> Explorer. v1607: Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> File Explorer >> "Configure Windows SmartScreen" to "Enabled". (Selection options are not available.) v1507 LTSB: Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> File Explorer >> "Configure Windows SmartScreen" to "Enabled" with "Require approval from an administrator before running downloaded unknown software" selected.

Generate Mitigation Statement:

Checks: C-64437r1_chk

The default behavior is for data execution prevention to be turned on for file explorer. If the registry value name below does not exist, this is not a finding. If it exists and is configured with a value of "0", this is not a finding. If it exists and is configured with a value of "1", this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Explorer\ Value Name: NoDataExecutionPrevention Value Type: REG_DWORD Value: 0 (or if the Value Name does not exist)

Fix: F-69617r1_fix

The default behavior is for data execution prevention to be turned on for file explorer. If this needs to be corrected, configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> File Explorer >> "Turn off Data Execution Prevention for Explorer" to "Not Configured" or "Disabled".

Generate Mitigation Statement:

Checks: C-64443r1_chk

The default behavior is for shell protected mode to be turned on for file explorer. If the registry value name below does not exist, this is not a finding. If it exists and is configured with a value of "0", this is not a finding. If it exists and is configured with a value of "1", this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer\ Value Name: PreXPSP2ShellProtocolBehavior Value Type: REG_DWORD Value: 0 (or if the Value Name does not exist)

Fix: F-69623r1_fix

The default behavior is for shell protected mode to be turned on for file explorer. If this needs to be corrected, configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> File Explorer >> "Turn off shell protocol protected mode" to "Not Configured" or "Disabled".

Generate Mitigation Statement:

Checks: C-64445r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\ Value Name: SCRemoveOption Value Type: REG_SZ Value: 1 (Lock Workstation) or 2 (Force Logoff) This can be left not configured or set to "No action" on workstations with the following conditions. This must be documented with the ISSO. -The setting cannot be configured due to mission needs, or because it interferes with applications. -Policy must be in place that users manually lock workstations when leaving them unattended. -The screen saver is properly configured to lock as required.

Fix: F-69625r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Interactive logon: Smart card removal behavior" to "Lock Workstation" or "Force Logoff".

Generate Mitigation Statement:

Checks: C-79101r1_chk

This is applicable to unclassified systems, for other systems this is NA. Windows 10 LTSC\B versions do not include Microsoft Edge, this is NA for those systems. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\MicrosoftEdge\PhishingFilter\ Value Name: PreventOverride Type: REG_DWORD Value: 0x00000001 (1)

Fix: F-84617r2_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Microsoft Edge >> "Prevent bypassing Windows Defender SmartScreen prompts for sites" to "Enabled". v1703 and later of Windows 10 include duplicate policies for this setting. It can also be configured under Computer Configuration >> Administrative Templates >> Windows Components >> Windows Defender SmartScreen >> Microsoft Edge. v1607: The policy name is "Prevent bypassing SmartScreen prompts for sites".

Generate Mitigation Statement:

Checks: C-79105r1_chk

This is applicable to unclassified systems, for other systems this is NA. Windows 10 LTSC\B versions do not include Microsoft Edge, this is NA for those systems. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\MicrosoftEdge\PhishingFilter\ Value Name: PreventOverrideAppRepUnknown Type: REG_DWORD Value: 0x00000001 (1)

Fix: F-84619r2_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Microsoft Edge >> "Prevent bypassing Windows Defender SmartScreen prompts for files" to "Enabled". v1703 of Windows 10 include duplicate policies for this setting. It can also be configured under Computer Configuration >> Administrative Templates >> Windows Components >> Windows Defender SmartScreen >> Microsoft Edge. v1607: The policy name is "Prevent bypassing SmartScreen prompts for files".

Generate Mitigation Statement:

Checks: C-64451r1_chk

If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters\ Value Name: RequireSecuritySignature Value Type: REG_DWORD Value: 1

Fix: F-69629r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Microsoft network client: Digitally sign communications (always)" to "Enabled".

Generate Mitigation Statement:

Checks: C-79107r1_chk

Windows 10 LTSC\B versions do not include Microsoft Edge, this is NA for those systems. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\MicrosoftEdge\Main\ Value Name: AllowInPrivate Type: REG_DWORD Value: 0x00000000 (0)

Fix: F-83243r1_fix