Microsoft Publisher 2010

  • Version/Release: V1R9
  • Published: 2015-06-09
  • Expand All:
  • Severity:
  • Sort:
Compare

Select any two versions of this STIG to compare the individual requirements

View

Select any old version/release of this STIG to view the previous requirements

Settings in this guidance assume a complete installation of Microsoft Office 2010 on the Windows 7 Platform. Registry paths and values identified in each control assume the use of Group Policy Administrative Templates. Installations not using Group Policies to administer Microsoft Office products may observe alternate registry paths for stored configuration values. Comments or proposed revisions to this document should be sent via e-mail to the following address: disa.stig_spt@mail.mil.
b
Disabling of user name and password syntax from being used in URLs must be enforced.
Medium - V-17173 - SV-33895r1_rule
RMF Control
Severity
Medium
CCI
Version
DTOO104 - Publisher
Vuln IDs
  • V-17173
Rule IDs
  • SV-33895r1_rule
The Uniform Resource Locator (URL) standard allows user authentication to be included in URL strings in the form http://username:password@example.com. A malicious user might use this URL syntax to create a hyperlink that appears to open a legitimate Web site but actually opens a deceptive (spoofed) Web site. For example, the URL http://www.wingtiptoys.com@example.com appears to open http://www.wingtiptoys.com but actually opens http://example.com. To protect users from such attacks, Internet Explorer usually blocks any URLs using this syntax. This functionality can be controlled separately for instances of Internet Explorer spawned by Office applications (for example, if a user clicks a link in an Office document or selects a menu option that loads a Web page). If user names and passwords in URLs are allowed, users could be diverted to dangerous Web pages, which could pose a security risk. System AdministratorInformation Assurance OfficerECSC-1
Checks: C-34303r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2010 (Machine) -> Security Settings -> IE Security “Disable user name and password” must be “Enabled” and a check in the ‘mspub.exe’ check box must be present. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_HTTP_USERNAME_PASSWORD_DISABLE Criteria: If the value mspub.exe is REG_DWORD = 1, this is not a finding.

Fix: F-29966r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2010 (Machine) -> Security Settings -> IE Security “Disable user name and password” to “Enabled” and place a check in the ‘mspub.exe’ check box.

b
Enabling IE Bind to Object functionality must be present.
Medium - V-17174 - SV-33890r1_rule
RMF Control
Severity
Medium
CCI
Version
DTOO111 - Publisher
Vuln IDs
  • V-17174
Rule IDs
  • SV-33890r1_rule
Internet Explorer performs a number of safety checks before initializing an ActiveX control. It will not initialize a control if the kill bit for the control is set in the registry, or if the security settings for the zone in which the control is located do not allow it to be initialized. This functionality can be controlled separately for instances of Internet Explorer spawned by Office applications (for example, if a user clicks a link in an Office document or selects a menu option that loads a Web page). A security risk could occur if potentially dangerous controls are allowed to load. System AdministratorInformation Assurance OfficerECSC-1
Checks: C-34289r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2010 (Machine) -> Security Settings -> IE Security “Bind to Object” must be “Enabled” and a check in the ‘mspub.exe’ check box must be present. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_SAFE_BINDTOOBJECT Criteria: If the value mspub.exe is REG_DWORD = 1, this is not a finding.

Fix: F-29961r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2010 (Machine) -> Security Settings -> IE Security “Bind to Object” to “Enabled” and place a check in the ‘mspub.exe’ check box.

b
Saved from URL mark to assure Internet zone processing must be enforced.
Medium - V-17175 - SV-33919r1_rule
RMF Control
Severity
Medium
CCI
Version
DTOO117 - Publisher
Vuln IDs
  • V-17175
Rule IDs
  • SV-33919r1_rule
Typically, when Internet Explorer loads a Web page from a Universal Naming Convention (UNC) share that contains a Mark of the Web (MOTW) comment, indicating the page was saved from a site on the Internet, Internet Explorer runs the page in the Internet security zone instead of the less restrictive Local Intranet security zone. This functionality can be controlled separately for instances of Internet Explorer spawned by Office applications (for example, if a user clicks a link in an Office document or selects a menu option that loads a Web page). If Internet Explorer does not evaluate the page for a MOTW, potentially dangerous code could be allowed to run.System AdministratorInformation Assurance OfficerECSC-1
Checks: C-34344r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2010 (Machine) -> Security Settings -> IE Security “Saved from URL” must be “Enabled” and a check in the ‘mspub.exe’ check box must be present. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_UNC_SAVEDFILECHECK Criteria: If the value mspub.exe is REG_DWORD = 1, this is not a finding.

Fix: F-29992r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2010 (Machine) -> Security Settings -> IE Security “Saved from URL” to “Enabled” and place a check in the ‘mspub.exe’ check box.

b
Navigation to URL's embedded in Office products must be blocked.
Medium - V-17183 - SV-33900r1_rule
RMF Control
Severity
Medium
CCI
Version
DTOO123 - Publisher
Vuln IDs
  • V-17183
Rule IDs
  • SV-33900r1_rule
To protect users from attacks, Internet Explorer usually does not attempt to load malformed URLs. This functionality can be controlled separately for instances of Internet Explorer spawned by Office applications (for example, if a user clicks a link in an Office document or selects a menu option that loads a Web page). If Internet Explorer attempts to load a malformed URL, a security risk could occur in some cases.System AdministratorInformation Assurance OfficerECSC-1
Checks: C-34496r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2010 (Machine) -> Security Settings -> IE Security “Navigate URL” must be “Enabled” and a check in the ‘mspub.exe’ check box must be present. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_VALIDATE_NAVIGATE_URL Criteria: If the value mspub.exe is REG_DWORD = 1, this is not a finding.

Fix: F-30024r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2010 (Machine) -> Security Settings -> IE Security “Navigate URL” to “Enabled” and place a check in the ‘mspub.exe’ check box.

b
Links that invoke instances of IE from within an Office product must be blocked.
Medium - V-17184 - SV-33894r1_rule
RMF Control
Severity
Medium
CCI
Version
DTOO129 - Publisher
Vuln IDs
  • V-17184
Rule IDs
  • SV-33894r1_rule
The Pop-up Blocker feature in Internet Explorer can be used to block most unwanted pop-up and pop-under windows from appearing. This functionality can be controlled separately for instances of Internet Explorer spawned by 2007 Office applications (for example, if a user clicks a link in an Office document or selects a menu option that loads a Web page). If the Pop-up Blocker is disabled, disruptive and potentially dangerous pop-up windows could load and present a security risk.System AdministratorInformation Assurance OfficerECSC-1
Checks: C-34302r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2010 (Machine) -> Security Settings -> IE Security “Block popups” must be “Enabled” and ‘mspub.exe' is checked. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_WEBOC_POPUPMANAGEMENT Criteria: If the value mspub.exe is REG_DWORD = 1, this is not a finding.

Fix: F-29965r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2010 (Machine) -> Security Settings -> IE Security “Block popups” to “Enabled” and select ‘mspub.exe'.

b
Trust Bar Notifications for unsigned application add-ins must be blocked.
Medium - V-17187 - SV-33928r1_rule
RMF Control
Severity
Medium
CCI
Version
DTOO131 - Publisher
Vuln IDs
  • V-17187
Rule IDs
  • SV-33928r1_rule
If an application is configured to require all add-ins be signed by a trusted publisher, any unsigned add-ins the application loads will be disabled and the application will display the Trust Bar at the top of the active window. The Trust Bar contains a message informing users about the unsigned add-in.System AdministratorInformation Assurance OfficerECSC-1
Checks: C-34370r1_chk

The policy value for User Configuration -> Administrative Templates -> Microsoft Publisher 2010 -> Security -> Trust Center “Disable Trust Bar Notification for unsigned application add-ins” must be “Enabled”. Procedure: Use the Windows Registry Editor to navigate to the following key: HKCU\Software\Policies\Microsoft\Office\14.0\publisher\security Criteria: If the value NoTBPromptUnsignedAddin is REG_DWORD = 1, this is not a finding.

Fix: F-30002r1_fix

Set the policy value for User Configuration -> Administrative Templates -> Microsoft Publisher 2010 -> Security -> Trust Center “Disable Trust Bar Notification for unsigned application add-ins” to “Enabled”.

b
Warning Bar settings for VBA macros must be configured.
Medium - V-17545 - SV-33930r1_rule
RMF Control
Severity
Medium
CCI
Version
DTOO304 - Publisher
Vuln IDs
  • V-17545
Rule IDs
  • SV-33930r1_rule
When users open files containing VBA Macros, applications open the files with the macros disabled and displays the Trust Bar with a warning that macros are present and have been disabled. Users may then enable these macros by clicking Options on the Trust Bar and selecting the option to enable them. Disabling or not configuring this setting may allow dangerous macros to become active on user computers or the network. System AdministratorInformation Assurance OfficerECSC-1
Checks: C-34372r1_chk

The policy value for User Configuration -> Administrative Templates -> Microsoft Publisher 2010-> Security -> Trust Center “VBA Macro Notification Settings” must be “Enabled (Disabled all with notifications)”. Procedure: Use the Windows Registry Editor to navigate to the following key: HKCU\Software\Policies\Microsoft\Office\14.0\publisher\security Criteria: If the value VBAWarnings is REG_DWORD = 2, this is not a finding.

Fix: F-30008r1_fix

Set the policy value for User Configuration -> Administrative Templates -> Microsoft Publisher 2010-> Security -> Trust Center “VBA Macro Notification Settings” to “Enabled (Disabled all with notifications)”.

b
Add-on Management functionality must be allowed.
Medium - V-26584 - SV-33887r2_rule
RMF Control
Severity
Medium
CCI
Version
DTOO126 - Publisher
Vuln IDs
  • V-26584
Rule IDs
  • SV-33887r2_rule
Internet Explorer add-ons are pieces of code, run in Internet Explorer, to provide additional functionality. Rogue add-ons may contain viruses or other malicious code. Disabling or not configuring this setting could allow malicious code or users to become active on user computers or the network. For example, a malicious user can monitor and then use keystrokes users type into Internet Explorer. Even legitimate add-ons may demand resources, compromising the performance of Internet Explorer, and the operating systems for user computers.System AdministratorInformation Assurance OfficerECSC-1
Checks: C-34278r3_chk

The policy value for Computer Configuration -> Administrative Templates -> Microsoft Ofice 2010 (Machine) -> Security Settings -> IE Security “Add-on Management” must be set to “Enabled” and 'mspub.exe' is checked. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ADDON_MANAGEMENT Criteria: If the value mspub.exe is REG_DWORD = 1, this is not a finding.

Fix: F-29958r3_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2010 (Machine) -> Security Settings -> IE Security “Add-on Management” to “Enabled” and 'mspub.exe' is checked.

b
Protection from zone elevation must be enforced.
Medium - V-26585 - SV-33901r1_rule
RMF Control
Severity
Medium
CCI
Version
DTOO209 - Publisher
Vuln IDs
  • V-26585
Rule IDs
  • SV-33901r1_rule
Internet Explorer places restrictions on each web page users can use the browser to open. Web pages on a user's local computer have the fewest security restrictions and reside in the Local Machine zone, making this security zone a prime target for malicious users and code. Disabling or not configuring this setting could allow pages in the Internet zone to navigate to pages in the Local Machine zone to then run code to elevate privileges. This could allow malicious code or users to become active on user computers or the network. System AdministratorInformation Assurance OfficerECSC-1
Checks: C-34327r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2010 (Machine) -> Security Settings -> IE Security “Protection From Zone Elevation” must be set to “Enabled” and 'mspub.exe' is checked. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ZONE_ELEVATION Criteria: If the value mspub.exe is REG_DWORD = 1, this is not a finding.

Fix: F-29972r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2010 (Machine) -> Security Settings -> IE Security “Protection From Zone Elevation” to “Enabled” and 'mspub.exe' is checked.

b
ActiveX Installs must be configured for proper restriction.
Medium - V-26586 - SV-33905r1_rule
RMF Control
Severity
Medium
CCI
Version
DTOO211 - Publisher
Vuln IDs
  • V-26586
Rule IDs
  • SV-33905r1_rule
Microsoft ActiveX controls allow unmanaged, unprotected code to run on the user computers. ActiveX controls do not run within a protected container in the browser like the other types of HTML or Microsoft Silverlight-based controls. Disabling or not configuring this setting does not block prompts for ActiveX control installations and these prompts display to users. This could allow malicious code to become active on user computers or the network. System AdministratorInformation Assurance OfficerECSC-1
Checks: C-34334r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2010 (Machine) -> Security Settings -> IE Security “Restrict ActiveX Install” must be set to “Enabled” and 'mspub.exe' is checked. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_RESTRICT_ACTIVEXINSTALL Criteria: If the value mspub.exe is REG_DWORD = 1, this is not a finding.

Fix: F-29978r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2010 (Machine) -> Security Settings -> IE Security “Restrict ActiveX Install” to “Enabled” and 'mspub.exe' is checked.

b
File Downloads must be configured for proper restrictions.
Medium - V-26587 - SV-33916r1_rule
RMF Control
Severity
Medium
CCI
Version
DTOO132 - Publisher
Vuln IDs
  • V-26587
Rule IDs
  • SV-33916r1_rule
Disabling this setting allows websites to present file download prompts via code without the user specifically initiating the download. User preferences may also allow the download to occur without prompting or interacting with the user. Even if Internet Explorer prompts the user to accept the download, some websites abuse this functionality. Malicious websites may continually prompt users to download a file or present confusing dialog boxes to trick users into downloading or running a file. If the download occurs and it contains malicious code, the code could become active on user computers or the network. System AdministratorInformation Assurance OfficerECSC-1
Checks: C-34341r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2010 (Machine) -> Security Settings -> IE Security “Restrict File Download” must be set to “Enabled” and 'mspub.exe' is checked. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_RESTRICT_FILEDOWNLOAD Criteria: If the value mspub.exe is REG_DWORD = 1, this is not a finding.

Fix: F-29989r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2010 (Machine) -> Security Settings -> IE Security “Restrict File Download” to “Enabled” and 'mspub.exe' is checked.

b
Scripted Window Security must be enforced.
Medium - V-26588 - SV-33922r1_rule
RMF Control
Severity
Medium
CCI
Version
DTOO124 - Publisher
Vuln IDs
  • V-26588
Rule IDs
  • SV-33922r1_rule
Malicious websites often try to confuse or trick users into giving a site permission to perform an action allowing the site to take control of the users' computers in some manner. Disabling or not configuring this setting allows unknown websites to: -Create browser windows appearing to be from the local operating system. -Draw active windows displaying outside of the viewable areas of the screen capturing keyboard input. -Overlay parent windows with their own browser windows to hide important system information, choices or prompts. System AdministratorInformation Assurance OfficerECSC-1
Checks: C-34347r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2010 (Machine) -> Security Settings -> IE Security “Scripted Window Security Restrictions” must be set to “Enabled” and ‘mspub.exe’ is checked. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_WINDOW_RESTRICTIONS Criteria: If the value mspub.exe is REG_DWORD = 1, this is not a finding.

Fix: F-29995r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2010 (Machine) -> Security Settings -> IE Security “Scripted Window Security Restrictions” to “Enabled” and ‘mspub.exe’ is checked.

b
Application add-ins must be signed by Trusted Publisher.
Medium - V-26589 - SV-33929r1_rule
RMF Control
Severity
Medium
CCI
Version
DTOO127 - Publisher
Vuln IDs
  • V-26589
Rule IDs
  • SV-33929r1_rule
Office 2010 applications do not check the digital signature on application add-ins before opening them. Disabling or not configuring this setting may allow an application to load a dangerous add-in. As a result, malicious code could become active on user computers or the network.System AdministratorInformation Assurance OfficerECSC-1
Checks: C-34371r1_chk

The policy value for User Configuration -> Administrative Templates -> Microsoft Publisher 2010 -> Security -> Trust Center “Require that application add-ins are signed by Trusted Publisher" must be set to “Enabled”. Procedure: Use the Windows Registry Editor to navigate to the following key: HKCU\Software\Policies\Microsoft\Office\14.0\publisher\security Criteria: If the value RequireAddinSig is REG_DWORD = 1, this is not a finding.

Fix: F-30006r1_fix

Set the policy value for User Configuration -> Administrative Templates -> Microsoft Publisher 2010 -> Security -> Trust Center “Require that application add-ins are signed by Trusted Publisher" to “Enabled”.

b
Data Execution Prevention must be enforced.
Medium - V-26590 - SV-33926r1_rule
RMF Control
Severity
Medium
CCI
Version
DTOO128 - Publisher
Vuln IDs
  • V-26590
Rule IDs
  • SV-33926r1_rule
Data Execution Prevention (DEP) is a set of hardware and software technologies performing additional checks on memory to help prevent malicious code from running on a system. The primary benefit of DEP is to help prevent code execution from data pages. Enabling this setting, turns off Data Execution Prevention. As a result, malicious code takes advantage of code injection or buffer overflow vulnerabilities possibly exploiting the computer.System AdministratorInformation Assurance OfficerECSC-1
Checks: C-34368r1_chk

The policy value for User Configuration -> Administrative Templates -> Microsoft Publisher 2010 -> Security -> Trust Center “Turn off Data Execution Prevention” must be set to “Disabled”. Procedure: Use the Windows Registry Editor to navigate to the following key: HKCU\Software\Policies\Microsoft\Office\14.0\publisher\security Criteria: If the value EnableDEP is REG_DWORD = 1, this is not a finding.

Fix: F-30000r1_fix

Set the policy value for User Configuration -> Administrative Templates -> Microsoft Publisher 2010 -> Security -> Trust Center “Turn off Data Execution Prevention” to “Disabled”.

b
Disable UI extending from documents and templates must be disallowed.
Medium - V-26625 - SV-33923r1_rule
RMF Control
Severity
Medium
CCI
Version
DTOO305 - Publisher
Vuln IDs
  • V-26625
Rule IDs
  • SV-33923r1_rule
Office 2010 allows developers to extend the UI with customization code that is included in a document or template. If the customization code is written by an inexperienced or malicious developer, it could limit the accessibility or availability of important application commands. Commands could also be added to launch macros containing malicious code. Office applications load any UI customization code included with a document or template when opening it.System AdministratorInformation Assurance OfficerECSC-1
Checks: C-34348r1_chk

The policy value for User Configuration -> Administrative Templates -> Microsoft Office 2010 -> Global Options -> Customize “Disable UI extending from documents and templates” must be “Enabled" and "Disallow in Publisher" selected. Procedure: Use the Windows Registry Editor to navigate to the following key: HKCU\Software\Policies\Microsoft\Office\14.0\common\toolbars\publisher Criteria: If the value NoExtensibilityCustomizationFromDocument is REG_DWORD = 1, this is not a finding.

Fix: F-29997r1_fix

Set the policy value for User Configuration -> Administrative Templates -> Microsoft Office 2010 -> Global Options -> Customize “Disable UI extending from documents and templates” to “Enabled" and select "Disallow in Publisher".

b
Fatally corrupt files must be blocked from opening.
Medium - V-26707 - SV-34092r1_rule
RMF Control
Severity
Medium
CCI
Version
DTOO322 - Publisher
Vuln IDs
  • V-26707
Rule IDs
  • SV-34092r1_rule
Enabling this setting allows user to open fatally corrupt Publisher 2010 files. As a result, malicious code or users could become active on user computers or the network. For example, a malicious user may purposely corrupt a Publisher file. The corrupted file could force the application to fail or execute malicious code, giving the malicious user control of Publisher 2010. System AdministratorInformation Assurance OfficerECSC-1
Checks: C-34494r1_chk

The policy value for User Configuration -> Administrative Templates -> Microsoft Publisher 2010 -> Security “Prompt to allow fatally corrupt files to open instead of blocking them” must be set to “Disabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKCU\Software\Policies\Microsoft\Office\14.0\publisher Criteria: If the value PromptForBadFiles is REG_DWORD = 0, this is not a finding.

Fix: F-30019r1_fix

Set the policy value for User Configuration -> Administrative Templates -> Microsoft Publisher 2010 -> Security “Prompt to allow fatally corrupt files to open instead of blocking them” to “Disabled".

b
The Publisher Automation Security Level must be configured for high security.
Medium - V-26708 - SV-34093r1_rule
RMF Control
Severity
Medium
CCI
Version
DTOO323 - Publisher
Vuln IDs
  • V-26708
Rule IDs
  • SV-34093r1_rule
When a separate application is used to launch Publisher 2010 programmatically, any macros can run in the programmatically-opened application without being blocked. Disabling or not configuring this setting could allow a malicious user to use automation to run malicious code in Publisher 2010. System AdministratorInformation Assurance OfficerECSC-1
Checks: C-34495r1_chk

The policy value for User Configuration -> Administrative Templates -> Microsoft Publisher 2010 -> Security “Publisher Automation Security Level” must be set to “Enabled and High (Disabled)" is selected. Procedure: Use the Windows Registry Editor to navigate to the following key: HKCU\Software\Policies\Microsoft\Office\Common\Security Criteria: If the value AutomationSecurityPublisher is REG_DWORD = 3, this is not a finding.

Fix: F-30020r1_fix

Set the policy value for User Configuration -> Administrative Templates -> Microsoft Publisher 2010 -> Security “Publisher Automation Security Level” to “Enabled and High (Disabled)" is selected.