Cyber Trackr - Free Compliance Library
Cyber Trackr
The Free Compliance Library

MS SharePoint Designer 2013 Security Technical Implementation Guide

  • Version/Release: V1R3
  • Published: 2018-04-02
  • Released: 2018-04-27
  • Expand All:
  • Severity:
  • Sort:
Compare

Select any two versions of this STIG to compare the individual requirements

View

Select any old version/release of this STIG to view the previous requirements

The Microsoft SharePointDesigner 2013 Security Technical Implementation Guide (STIG) is published as a tool to improve the security of Department of Defense (DoD) information systems. Comments or proposed revisions to this document should be sent via e-mail to the following address: disa.stig_spt@mail.mil.
b
Disabling of user name and password syntax from being used in URLs must be enforced.
SC-18 - Medium - CCI-001170 - V-40744 - SV-52802r1_rule
RMF Control
SC-18
Severity
Medium
CCI
CCI-001170
Version
DTOO104
Vuln IDs
  • V-40744
Rule IDs
  • SV-52802r1_rule
The Uniform Resource Locator (URL) standard allows user authentication to be included in URL strings in the form http://username:password@example.com. A malicious user might use this URL syntax to create a hyperlink that appears to open a legitimate website but actually opens a deceptive (spoofed) website. For example, the URL http://www.wingtiptoys.com@example.com appears to open http://www.wingtiptoys.com but actually opens http://example.com. To protect users from such attacks, Internet Explorer usually blocks any URLs using this syntax. This functionality can be controlled separately for instances of Internet Explorer spawned by Office applications (for example, if a user clicks a link in an Office document or selects a menu option that loads a web page). If user names and passwords in URLs are allowed, users could be diverted to dangerous web pages, which could pose a security risk.System AdministratorInformation Assurance Officer
Checks: C-47131r2_chk

Verify the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Disable user name and password" must be "Enabled" and a check in the 'spdesign.exe' check box must be present. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_HTTP_USERNAME_PASSWORD_DISABLE Criteria: If the value spdesign.exe is REG_DWORD = 1, this is not a finding.

Fix: F-45728r2_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Disable user name and password" to "Enabled" and place a check in the 'spdesign.exe' check box.

b
The Internet Explorer Bind to Object functionality must be enabled.
SC-18 - Medium - CCI-001695 - V-40745 - SV-52803r1_rule
RMF Control
SC-18
Severity
Medium
CCI
CCI-001695
Version
DTOO111
Vuln IDs
  • V-40745
Rule IDs
  • SV-52803r1_rule
Internet Explorer performs a number of safety checks before initializing an ActiveX control. It will not initialize a control if the kill bit for the control is set in the registry, or if the security settings for the zone in which the control is located do not allow it to be initialized. This functionality can be controlled separately for instances of Internet Explorer spawned by Office applications (for example, if a user clicks a link in an Office document or selects a menu option that loads a web page). A security risk could occur if potentially dangerous controls are allowed to load.System AdministratorInformation Assurance Officer
Checks: C-47132r1_chk

Verify the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Bind to Object" must be "Enabled" and a check in the 'spdesign.exe' check box must be present. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_SAFE_BINDTOOBJECT Criteria: If the value spdesign.exe is REG_DWORD = 1, this is not a finding.

Fix: F-45729r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Bind to Object" to "Enabled" and place a check in the 'spdesign.exe' check box.

b
The Saved from URL mark must be selected to enforce Internet zone processing
SC-18 - Medium - CCI-001170 - V-40746 - SV-52804r1_rule
RMF Control
SC-18
Severity
Medium
CCI
CCI-001170
Version
DTOO117
Vuln IDs
  • V-40746
Rule IDs
  • SV-52804r1_rule
Typically, when Internet Explorer loads a web page from a Universal Naming Convention (UNC) share that contains a Mark of the Web (MOTW) comment, indicating the page was saved from a site on the Internet, Internet Explorer runs the page in the Internet security zone instead of the less restrictive Local Intranet security zone. This functionality can be controlled separately for instances of Internet Explorer spawned by Office applications (for example, if a user clicks a link in an Office document or selects a menu option that loads a web page). If Internet Explorer does not evaluate the page for a MOTW, potentially dangerous code could be allowed to run.System AdministratorInformation Assurance Officer
Checks: C-47133r1_chk

Verify the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Saved from URL" must be "Enabled" and a check in the 'spdesign.exe' check box must be present. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_UNC_SAVEDFILECHECK Criteria: If the value spdesign.exe is REG_DWORD = 1, this is not a finding.

Fix: F-45730r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Saved from URL" to "Enabled" and place a check in the 'spdesign.exe' check box.

b
Navigation to URLs embedded in Office products must be blocked.
SC-18 - Medium - CCI-001170 - V-40747 - SV-52805r1_rule
RMF Control
SC-18
Severity
Medium
CCI
CCI-001170
Version
DTOO123
Vuln IDs
  • V-40747
Rule IDs
  • SV-52805r1_rule
To protect users from attacks, Internet Explorer usually does not attempt to load malformed URLs. This functionality can be controlled separately for instances of Internet Explorer spawned by Office applications (for example, if a user clicks a link in an Office document or selects a menu option that loads a web page). If Internet Explorer attempts to load a malformed URL, a security risk could occur.System AdministratorInformation Assurance Officer
Checks: C-47134r1_chk

Verify the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Navigate URL" must be "Enabled" and a check in the 'spdesign.exe' check box must be present. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_VALIDATE_NAVIGATE_URL Criteria: If the value spdesign.exe is REG_DWORD = 1, this is not a finding.

Fix: F-45731r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Navigate URL" to "Enabled" and place a check in the 'spdesign.exe' check box.

b
Scripted Window Security must be enforced.
SC-18 - Medium - CCI-001695 - V-40748 - SV-52806r1_rule
RMF Control
SC-18
Severity
Medium
CCI
CCI-001695
Version
DTOO124
Vuln IDs
  • V-40748
Rule IDs
  • SV-52806r1_rule
Malicious websites often try to confuse or trick users into giving a site permission to perform an action allowing the site to take control of the users' computers in some manner. Disabling or not configuring this setting allows unknown websites to: -Create browser windows appearing to be from the local operating system. -Draw active windows displaying outside of the viewable areas of the screen capturing keyboard input. -Overlay parent windows with their own browser windows to hide important system information, choices or prompts.Information Assurance OfficerSystem Administrator
Checks: C-47135r1_chk

Verify the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Scripted Window Security Restrictions" is set to "Enabled" and 'spdesign.exe' is checked. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_WINDOW_RESTRICTIONS Criteria: If the value spdesign.exe is REG_DWORD = 1, this is not a finding.

Fix: F-45732r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Scripted Window Security Restrictions" to "Enabled" and 'spdesign.exe' is checked.

b
Add-on Management functionality must be allowed.
SC-18 - Medium - CCI-001662 - V-40749 - SV-52807r1_rule
RMF Control
SC-18
Severity
Medium
CCI
CCI-001662
Version
DTOO126
Vuln IDs
  • V-40749
Rule IDs
  • SV-52807r1_rule
Internet Explorer add-ons are pieces of code, run in Internet Explorer, to provide additional functionality. Rogue add-ons may contain viruses or other malicious code. Disabling or not configuring this setting could allow malicious code or users to become active on user computers or the network. For example, a malicious user can monitor and then use keystrokes users type into Internet Explorer. Even legitimate add-ons may demand resources, compromising the performance of Internet Explorer, and the operating systems for user computers.Information Assurance OfficerSystem Administrator
Checks: C-47136r1_chk

Verify the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Add-on Management" is set to "Enabled" and 'spdesign.exe' is checked. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ADDON_MANAGEMENT Criteria: If the value spdesign.exe is REG_DWORD = 1, this is not a finding.

Fix: F-45733r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Add-on Management" to "Enabled" and 'spdesign.exe' is checked.

b
Links that invoke instances of IE from within an Office product must be blocked.
SC-18 - Medium - CCI-001662 - V-40750 - SV-52808r1_rule
RMF Control
SC-18
Severity
Medium
CCI
CCI-001662
Version
DTOO129
Vuln IDs
  • V-40750
Rule IDs
  • SV-52808r1_rule
The Pop-up Blocker feature in Internet Explorer can be used to block most unwanted pop-up and pop-under windows from appearing. This functionality can be controlled separately for instances of Internet Explorer spawned by Office applications (for example, if a user clicks a link in an Office document or selects a menu option that loads a web page). If the Pop-up Blocker is disabled, disruptive and potentially dangerous pop-up windows could load and present a security risk.Information Assurance OfficerSystem Administrator
Checks: C-47137r1_chk

Verify the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Block popups" must be "Enabled" and 'spdesign.exe' is checked. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_WEBOC_POPUPMANAGEMENT Criteria: If the value spdesign.exe is REG_DWORD = 1, this is not a finding.

Fix: F-45734r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Block popups" to "Enabled" and select 'spdesign.exe'.

b
File downloads must be configured for proper restrictions.
SC-18 - Medium - CCI-001169 - V-40751 - SV-52809r1_rule
RMF Control
SC-18
Severity
Medium
CCI
CCI-001169
Version
DTOO132
Vuln IDs
  • V-40751
Rule IDs
  • SV-52809r1_rule
Disabling this setting allows websites to present file download prompts via code without the user specifically initiating the download. User preferences may also allow the download to occur without prompting or interaction with the user. Even if Internet Explorer prompts the user to accept the download, some websites abuse this functionality. Malicious websites may continually prompt users to download a file or present confusing dialog boxes to trick users into downloading or running a file. If the download occurs and it contains malicious code, the code could become active on user computers or the network.Information Assurance OfficerSystem Administrator
Checks: C-47138r1_chk

Verify the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Restrict File Download" is set to "Enabled" and 'spdesign.exe' is checked. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_RESTRICT_FILEDOWNLOAD Criteria: If the value spdesign.exe is REG_DWORD = 1, this is not a finding.

Fix: F-45735r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Restrict File Download" to "Enabled" and 'spdesign.exe' is checked.

b
Protection from zone elevation must be enforced.
SC-18 - Medium - CCI-001695 - V-40752 - SV-52810r1_rule
RMF Control
SC-18
Severity
Medium
CCI
CCI-001695
Version
DTOO209
Vuln IDs
  • V-40752
Rule IDs
  • SV-52810r1_rule
Internet Explorer places restrictions on each web page users can use the browser to open. Web pages on a user's local computer have the fewest security restrictions and reside in the Local Machine zone, making this security zone a prime target for malicious users and code. Disabling or not configuring this setting could allow pages in the Internet zone to navigate to pages in the Local Machine zone to then run code to elevate privileges. This could allow malicious code or users to become active on user computers or the network.Information Assurance OfficerSystem Administrator
Checks: C-47139r1_chk

Verify the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Protection From Zone Elevation" is set to "Enabled" and 'spdesign.exe' is checked. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ZONE_ELEVATION Criteria: If the value spdesign.exe is REG_DWORD = 1, this is not a finding.

Fix: F-45736r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Protection From Zone Elevation" to "Enabled" and 'spdesign.exe' is checked.

b
ActiveX installs must be configured for proper restrictions.
SC-18 - Medium - CCI-002460 - V-40755 - SV-52813r1_rule
RMF Control
SC-18
Severity
Medium
CCI
CCI-002460
Version
DTOO211
Vuln IDs
  • V-40755
Rule IDs
  • SV-52813r1_rule
Microsoft ActiveX controls allow unmanaged, unprotected code to run on the user computers. ActiveX controls do not run within a protected container in the browser like the other types of HTML or Microsoft Silverlight-based controls. Disabling or not configuring this setting does not block prompts for ActiveX control installations and these prompts display to users. This could allow malicious code to become active on user computers or the network.Information Assurance OfficerSystem Administrator
Checks: C-47140r1_chk

Verify the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Restrict ActiveX Install" is set to "Enabled" and 'spdesign.exe' is checked. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_RESTRICT_ACTIVEXINSTALL Criteria: If the value spdesign.exe is REG_DWORD = 1, this is not a finding.

Fix: F-45739r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Microsoft Office 2013 (Machine) -> Security Settings -> IE Security "Restrict ActiveX Install" to "Enabled" and 'spdesign.exe' is checked.