Cyber Trackr - Free Compliance Library
Cyber Trackr
The Free Compliance Library

Microsoft Internet Explorer 10 Security Technical Implementation Guide

  • Version/Release: V1R16
  • Published: 2019-12-12
  • Released: 2020-01-24
  • Expand All:
  • Severity:
  • Sort:
Compare

Select any two versions of this STIG to compare the individual requirements

View

Select any old version/release of this STIG to view the previous requirements

The Microsoft Internet Explorer 10 Security Technical Implementation Guide (STIG) is published as a tool to improve the security of Department of Defense (DoD) information systems. Comments or proposed revisions to this document should be sent via e-mail to the following address: disa.stig_spt@mail.mil
b
Internet Explorer must be configured to use machine settings.
Medium - V-3427 - SV-45220r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI320
Vuln IDs
  • V-3427
Rule IDs
  • SV-45220r1_rule
Users who change their Internet Explorer security settings could enable the execution of dangerous types of code from the Internet and websites listed in the Restricted Sites zone in the browser. This setting enforces consistent security zone settings to all users of the computer. Security zones control browser behavior at various websites and it is desirable to maintain a consistent policy for all users of a machine. This policy setting affects how security zone changes apply to different users. If you enable this policy setting, changes that one user makes to a security zone will apply to all users of that computer. If this policy setting is disabled or not configured, users of the same computer are allowed to establish their own security zone settings.HKSystem Administrator
Checks: C-42568r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer "Security Zones: Use only machine settings" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings Criteria: If the value Security_HKLM_only is REG_DWORD = 1, this is not a finding.

Fix: F-38616r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer "Security Zones: Use only machine settings" to "Enabled".

b
Internet Explorer must be configured to disallow users to change policies.
Medium - V-3428 - SV-45218r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI319
Vuln IDs
  • V-3428
Rule IDs
  • SV-45218r1_rule
Users who change their Internet Explorer security settings could enable the execution of dangerous types of code from the Internet and websites listed in the Restricted Sites zone in the browser. This setting prevents users from changing the Internet Explorer policies on the machine. Policy changes should be made by administrators only, so this setting should be enabled. If you enable this policy setting, you disable the Custom level button and Security level for this zone slider on the Security tab in the Internet Options dialog box. If this policy setting is disabled or not configured, users will be able to change the settings for security zones. It prevents users from changing security zone policy settings that are established by the administrator.HKSystem Administrator
Checks: C-42566r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer "Security Zones: Do not allow users to change policies" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings Criteria: If the value Security_options_edit is REG_DWORD = 1, this is not a finding.

Fix: F-38614r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer "Security Zones: Do not allow users to change policies" to "Enabled".

b
Internet Explorer must be set to disallow users to add/delete sites.
Medium - V-3429 - SV-45221r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI318
Vuln IDs
  • V-3429
Rule IDs
  • SV-45221r1_rule
This setting prevents users from adding sites to various security zones. Users should not be able to add sites to different zones, as this could allow them to bypass security controls of the system. If you do not configure this policy setting, users will be able to add or remove sites from the Trusted Sites and Restricted Sites zones at will and change settings in the Local Intranet zone. This configuration could allow sites that host malicious mobile code to be added to these zones, and users could execute the code.HKSystem Administrator
Checks: C-42569r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer "Security Zones: Do not allow users to add/delete sites" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings Criteria: If the value Security_zones_map_edit is REG_DWORD = 1, this is not a finding.

Fix: F-38617r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer "Security Zones: Do not allow users to add/delete sites" to "Enabled".

a
Internet Explorer must be configured to make proxy settings per user.
Low - V-3430 - SV-45219r1_rule
RMF Control
Severity
Low
CCI
Version
DTBI367
Vuln IDs
  • V-3430
Rule IDs
  • SV-45219r1_rule
This setting controls whether or not the Internet Explorer proxy settings are configured on a per-user or per-machine basis. If you enable this policy, users cannot set user specific proxy settings. They must use the zones created for all users of the computer. If you disable this policy or do not configure it, users of the same computer can establish their own proxy settings. This policy is intended to ensure that proxy settings apply uniformly to the same computer and do not vary from user to user.System Administrator
Checks: C-42567r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer "Make proxy settings per-machine (rather than per user)" must be "Disabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings Criteria: If the value ProxySettingsPerUser is REG_DWORD = 1, this is not a finding.

Fix: F-38615r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer "Make proxy settings per-machine (rather than per user)" to "Disabled".

b
The Internet Explorer TLS parameter must be set correctly.
Medium - V-6238 - SV-45415r8_rule
RMF Control
Severity
Medium
CCI
Version
DTBI014
Vuln IDs
  • V-6238
Rule IDs
  • SV-45415r8_rule
This parameter ensures only DoD-approved ciphers and algorithms are enabled for use by the web browser. TLS is a protocol for protecting communications between the browser and the target server. When the browser attempts to set up a protected communication with the target server, the browser and server negotiate which protocol and version to use. The browser and server attempt to match each other's list of supported protocols and versions and pick the most preferred match.System Administrator
Checks: C-42764r20_chk

Open Internet Explorer. From the menu bar, select "Tools". From the "Tools" drop-down menu, select "Internet Options". From the "Internet Options" window, select the "Advanced" tab, from the "Advanced" tab window scroll down to the "Security" category. Verify a checkmark is placed in the "Use TLS 1.1", and "Use TLS 1.2" check boxes. Verify there is not a check placed in the check box for "Use SSL 2.0", "Use SSL 3.0", or "Use TLS 1.0." If "Use SSL 2.0", "Use SSL 3.0", or "Use TLS 1.0" is checked, this is a finding. 1) The policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Internet Explorer >> Internet Control Panel >> Advanced Page >> "Turn off Encryption Support" must be "Enabled" and ensure the options selected are "Use TLS 1.1", and "Use TLS 1.2" from the drop-down box. If the selected options contain "SSL 2.0", "SSL 3.0",or "Use TLS 1.0", this is a finding. 2) The policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Internet Explorer >> Security Features >> "Allow fallback to SSL 3.0 (Internet Explorer)" must be "Enabled", and "No Sites" selected from the drop-down box. If "Allow fallback to SSL 3.0 (Internet Explorer)" is not "Enabled" or any other drop-down option is selected, this is a finding. 3) The registry value for HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings?\SecureProtocols must be "2688". If the "SecureProtocols" DWORD value is not "2688", this is a finding.

Fix: F-38812r16_fix

Open Internet Explorer. From the menu bar, select "Tools". From the "Tools" drop-down menu, select "Internet Options". From the "Internet Options" window, select the "Advanced" tab, from the "Advanced" tab window scroll down to the "Security" category. Place a checkmark in "Use TLS 1.1" and "Use TLS 1.2" check boxes. Set the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Internet Explorer >> Internet Control Panel >> Advanced Page >> "Turn off Encryption Support" to "Enabled", and select "Use TLS 1.1" and "Use TLS 1.2" from the drop-down box. Set the registry value for HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings?\SecureProtocols must to "2688".

b
The Internet Explorer warning about certificate address mismatch must be enforced.
Medium - V-6239 - SV-45417r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI015
Vuln IDs
  • V-6239
Rule IDs
  • SV-45417r1_rule
This parameter warns users if the certificate being presented by the website is invalid. Since server certificates are used to validate the identity of the web server it is critical to warn the user of a potential issue with the certificate being presented by the web server. This setting aids to prevent spoofing attacks.System Administrator
Checks: C-42768r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page "Turn on certificate address mismatch warning" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings Criteria: If the value WarnOnBadCertRecving is REG_DWORD = 1, this is not a finding.

Fix: F-38815r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page "Turn on certificate address mismatch warning" to "Enabled".

b
The Download signed ActiveX controls property must be disallowed (Internet zone).
Medium - V-6243 - SV-75313r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI022
Vuln IDs
  • V-6243
Rule IDs
  • SV-75313r1_rule
Active X controls can contain potentially malicious code and must only be allowed to be downloaded from trusted sites. Signed code is better than unsigned code in that it may be easier to determine its author, but it is still potentially harmful, especially when coming from an untrusted zone. This policy setting allows you to manage whether users may download signed ActiveX controls from a page in the zone. If you enable this policy, users can download signed controls without user intervention. If you select Prompt in the drop-down box, users are queried whether to download controls signed by untrusted publishers. Code signed by trusted publishers is silently downloaded. If you disable the policy setting, signed controls cannot be downloaded.System Administrator
Checks: C-42756r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Download signed ActiveX controls" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 1001 is REG_DWORD = 3, this is not a finding.

Fix: F-38804r2_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Download signed ActiveX controls" to "Enabled", and select "Disable" from the drop-down box.

b
The Download unsigned ActiveX controls property must be disallowed (Internet zone).
Medium - V-6244 - SV-45408r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI023
Vuln IDs
  • V-6244
Rule IDs
  • SV-45408r1_rule
Unsigned code is potentially harmful, especially when coming from an untrusted zone. This policy setting allows you to manage whether users may download unsigned ActiveX controls from the zone. If you enable this policy setting, users can run unsigned controls without user intervention. If you select Prompt in the drop-down box, users are queried to choose whether to allow the unsigned control to run. If you disable this policy setting, users cannot run unsigned controls. If you do not configure this policy setting, users cannot run unsigned controls.System Administrator
Checks: C-42757r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Download unsigned ActiveX controls" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 1004 is REG_DWORD = 3, this is not a finding.

Fix: F-38805r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Download unsigned ActiveX controls" to "Enabled", and select "Disable" from the drop-down box.

b
The Initialize and script ActiveX controls not marked as safe property must be disallowed (Internet zone).
Medium - V-6245 - SV-45410r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI024
Vuln IDs
  • V-6245
Rule IDs
  • SV-45410r1_rule
ActiveX controls that are not marked safe for scripting should not be executed. Although this is not a complete security measure for a control to be marked safe for scripting, if a control is not marked safe, it should not be initialized and executed. This setting causes both unsafe and safe controls to be initialized and scripted, ignoring the Script ActiveX controls marked safe for scripting option. This increases the risk of malicious code being loaded and executed by the browser. If you enable this policy setting, ActiveX controls are run, loaded with parameters and scripted without setting object safety for untrusted data or scripts. If you disable this policy setting, ActiveX controls that cannot be made safe are not loaded with parameters or scripted. This setting is not recommended, except for secure and administered zones.System Administrator
Checks: C-42760r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Initialize and script ActiveX controls not marked as safe" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 1201 is REG_DWORD = 3, this is not a finding.

Fix: F-38808r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Initialize and script ActiveX controls not marked as safe" to "Enabled", and select "Disable" from the drop-down box.

b
Font downloads must be disallowed (Internet zone).
Medium - V-6248 - SV-45158r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI030
Vuln IDs
  • V-6248
Rule IDs
  • SV-45158r1_rule
Downloads of fonts can sometimes contain malicious code. It is possible that a font could include malformed data that would cause Internet Explorer to crash when it attempts to load and render the font. This policy setting allows you to manage whether pages of the zone may download HTML fonts. If you enable this policy setting, HTML fonts can be downloaded automatically. If you enable this policy setting and Prompt is selected in the drop-down box, users are queried whether to allow HTML fonts to download. If you disable this policy setting, HTML fonts are prevented from downloading.System Administrator
Checks: C-42501r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Allow font downloads" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 1604 is REG_DWORD = 3, this is not a finding.

Fix: F-38554r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Allow font downloads" to "Enabled", and select "Disable" from the drop-down box.

b
The Java permissions must be disallowed (Internet zone).
Medium - V-6249 - SV-45420r2_rule
RMF Control
Severity
Medium
CCI
Version
DTBI031
Vuln IDs
  • V-6249
Rule IDs
  • SV-45420r2_rule
Java applications could contain malicious code; sites located in this security zone are more likely to be hosted by malicious individuals. This policy setting allows you to manage permissions for Java applets. If you enable this policy setting, options can be chosen from the drop-down box. Use of Custom will control permissions settings individually. Use of Low Safety enables applets to perform all operations. Use of Medium Safety enables applets to run in their sandbox (an area in memory outside of which the program cannot make calls), plus capabilities like scratch space (a safe and secure storage area on the client computer) and user-controlled file I/O. Use of High Safety enables applets to run in their sandbox. If you disable this policy setting, Java applets cannot run. If you do not configure this policy setting, the permission is set to High Safety.System Administrator
Checks: C-42770r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Java permissions" must be "Enabled", and "Disable Java" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 1C00 is REG_DWORD = 0, this is not a finding.

Fix: F-38817r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Java permissions" to "Enabled", and select "Disable Java" from the drop-down box.

b
Accessing data sources across domains must be disallowed (Internet zone).
Medium - V-6250 - SV-45065r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI032
Vuln IDs
  • V-6250
Rule IDs
  • SV-45065r1_rule
The ability to access data zones across domains could cause the user to unknowingly access content hosted on an unauthorized server. Access to data sources across multiple domains must be controlled based upon the site being browsed. This policy setting allows you to manage whether Internet Explorer can access data from another security zone using the Microsoft XML Parser (MSXML) or ActiveX Data Objects (ADO).System Administrator
Checks: C-42438r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Access data sources across domains" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 1406 is REG_DWORD = 3, this is not a finding.

Fix: F-38473r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Access data sources across domains" to "Enabled", and select "Disable" from the drop-down box.

b
Functionality to drag and drop or copy and paste files must be disallowed (Internet zone).
Medium - V-6253 - SV-45212r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI036
Vuln IDs
  • V-6253
Rule IDs
  • SV-45212r1_rule
Content hosted on sites located in the Internet zone are likely to contain malicious payloads and therefore this feature should be blocked for this zone. Drag and drop or copy and paste files must have a level of protection based upon the site being accessed.System Administrator
Checks: C-42560r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Allow drag and drop or copy and paste files" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value for 1802 is REG_DWORD = 3, this is not a finding.

Fix: F-38608r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Allow drag and drop or copy and paste files" to "Enabled", and select "Disable" from the drop-down box.

b
Launching programs and files in IFRAME must be disallowed (Internet zone).
Medium - V-6255 - SV-45265r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI038
Vuln IDs
  • V-6255
Rule IDs
  • SV-45265r1_rule
This policy setting allows you to manage whether applications may be run and files may be downloaded from an IFRAME reference in the HTML of the pages in this zone. Launching of programs in IFRAME must have a level of protection based upon the site being accessed. If you enable this policy setting, applications can run and files can be downloaded from IFRAMEs on the pages in this zone without user intervention. If you disable this setting, users are prevented from running applications and downloading files from IFRAMEs on the pages in this zone.System Administrator
Checks: C-42612r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Launching applications and files in an IFRAME" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 1804 is REG_DWORD = 3, this is not a finding.

Fix: F-38661r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Launching applications and files in an IFRAME" to "Enabled", and select "Disable" from the drop-down box.

b
Navigating windows and frames across different domains must be disallowed (Internet zone).
Medium - V-6256 - SV-45280r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI039
Vuln IDs
  • V-6256
Rule IDs
  • SV-45280r1_rule
Frames that navigate across different domains are a security concern, because the user may think they are accessing pages on one site while they are actually accessing pages on another site. It is possible that a website hosting malicious content could use this feature in a manner similar to cross site scripting. This policy setting allows you to manage the opening of sub-frames and access of applications across different domains.System Administrator
Checks: C-42627r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Navigate windows and frames across different domains" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\InternetSettings\Zones\3 Criteria: If the value 1607 is REG_DWORD = 3, this is not a finding.

Fix: F-38676r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Navigate windows and frames across different domains" to "Enabled", and select "Disable" from the drop-down box.

b
Userdata persistence must be disallowed (Internet zone).
Medium - V-6259 - SV-45459r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI042
Vuln IDs
  • V-6259
Rule IDs
  • SV-45459r1_rule
Userdata persistence must have level of protection based upon the site being accessed. It is possible for sites hosting malicious content to exploit this feature as part of an attack against visitors browsing the site. This policy setting allows you to manage the preservation of information in the browser's history, in favorites, in an XML store, or directly within a web page saved to disk. When a user returns to a persisted page, the state of the page can be restored if this policy setting is not appropriately configured. System Administrator
Checks: C-42807r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Userdata persistence" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 1606 is REG_DWORD = 3, this is not a finding.

Fix: F-38856r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Userdata persistence" to "Enabled", and select "Disable" from the drop-down box.

b
Clipboard operations via script must be disallowed (Internet zone).
Medium - V-6260 - SV-45122r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI044
Vuln IDs
  • V-6260
Rule IDs
  • SV-45122r1_rule
A malicious script could use the clipboard in an undesirable manner, for example, if the user had recently copied confidential information to the clipboard while editing a document, a malicious script could harvest that information. It might be possible to exploit other vulnerabilities in order to send the harvested data to the attacker. Allow paste operations via script must have level of protection based upon the site being accessed.System Administrator
Checks: C-42473r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Allow cut, copy or paste operations from the clipboard via script" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 1407 is REG_DWORD = 3, this is not a finding.

Fix: F-38519r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Allow cut, copy or paste operations from the clipboard via script" to "Enabled", and select "Disable" from the drop-down box.

b
Logon options must be configured to prompt (Internet zone).
Medium - V-6262 - SV-45273r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI046
Vuln IDs
  • V-6262
Rule IDs
  • SV-45273r1_rule
Users could submit credentials to servers operated by malicious individuals who could then attempt to connect to legitimate servers with those captured credentials. Care must be taken with user credentials, automatic logon performance, and how default Windows credentials are passed to websites. This policy setting allows management of settings for logon options. If you enable this policy setting, you can choose from varying logon options. “Anonymous logon” disables HTTP authentication and uses the guest account only for the Common Internet File System (CIFS) protocol. “Prompt for user name and password” queries users for user IDs and passwords. After a user is queried, these values can be used silently for the remainder of the session. “Automatic logon only in Intranet zone” queries users for user IDs and passwords in other zones. After a user is queried, these values can be used silently for the remainder of the session. “Automatic logon with current user name and password” attempts logon using Windows NT Challenge Response. If Windows NT Challenge Response is supported by the server, the logon uses the user's network user name and password for login. If Windows NT Challenge Response is not supported by the server, the user is queried to provide the user name and password. If you disable this policy setting, logon is set to “Automatic logon only in Intranet zone”. If you do not configure this policy setting, logon is set to “Automatic logon only in Intranet zone”. The most secure option is to configure this setting to “Enabled”; “Anonymous logon”, but configuring this setting to “Enabled”; “Prompt for user name and password”, provides a reasonable balance between security and usability.System Administrator
Checks: C-42620r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Logon options" must be "Enabled", and "Prompt for user name and password" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 1A00 is REG_DWORD = 65536 (decimal), this is not a finding.

Fix: F-38669r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Logon options" to "Enabled", and select "Prompt for user name and password" from the drop-down box.

b
Java permissions must be configured with High Safety (Intranet zone).
Medium - V-6267 - SV-45250r2_rule
RMF Control
Severity
Medium
CCI
Version
DTBI061
Vuln IDs
  • V-6267
Rule IDs
  • SV-45250r2_rule
Java applications could contain malicious code. This policy setting allows you to manage permissions for Java applets. If you enable this policy setting, options can be chosen from the drop-down box. Use of Custom will control permissions settings individually. Use of Low Safety enables applets to perform all operations. Use of Medium Safety enables applets to run in their sandbox (an area in memory outside of which the program cannot make calls), plus capabilities like scratch space (a safe and secure storage area on the client computer) and user-controlled file I/O. Use of High Safety enables applets to run in their sandbox. If you disable this policy setting, Java applets cannot run. If you do not configure this policy setting, the permission is set to High Safety. System Administrator
Checks: C-42597r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Intranet Zone -> "Java permissions" must be "Enabled", and "High Safety" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\1 Criteria: If the value 1C00 is REG_DWORD = 65536, (Decimal), this is not a finding.

Fix: F-38646r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Intranet Zone -> "Java permissions" to "Enabled", and select "High Safety" from the drop-down box.

b
Java permissions must be configured with High Safety (Trusted Sites zone).
Medium - V-6281 - SV-45251r2_rule
RMF Control
Severity
Medium
CCI
Version
DTBI091
Vuln IDs
  • V-6281
Rule IDs
  • SV-45251r2_rule
Java applications could contain malicious code. This policy setting allows you to manage permissions for Java applets. If you enable this policy setting, options can be chosen from the drop-down box. Use of Custom will control permissions settings individually. Use of Low Safety enables applets to perform all operations. Use of Medium Safety enables applets to run in their sandbox (an area in memory outside of which the program cannot make calls), plus capabilities like scratch space (a safe and secure storage area on the client computer) and user-controlled file I/O. Use of High Safety enables applets to run in their sandbox. If you disable this policy setting, Java applets cannot run. If you do not configure this policy setting, the permission is set to High Safety. System Administrator
Checks: C-42598r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Trusted Sites Zone -> "Java permissions" must be "Enabled", and "High Safety" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\2 Criteria: If the value 1C00 is REG_DWORD = 65536, (Decimal), this is not a finding.

Fix: F-38647r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Trusted Sites Zone -> "Java permissions" to "Enabled", and select "High Safety" from the drop-down box.

b
The Download signed ActiveX controls property must be disallowed (Restricted Sites zone).
Medium - V-6289 - SV-45326r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI112
Vuln IDs
  • V-6289
Rule IDs
  • SV-45326r1_rule
ActiveX controls can contain potentially malicious code and must only be allowed to be downloaded from trusted sites. Signed code is better than unsigned code in that it may be easier to determine its author, but it is still potentially harmful, especially when coming from an untrusted zone.System Administrator
Checks: C-42675r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Download signed ActiveX controls" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1001 is REG_DWORD = 3, this is not a finding.

Fix: F-38723r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Download signed ActiveX controls" to "Enabled", and select "Disable" from the drop-down box.

b
The Download unsigned ActiveX controls property must be disallowed (Restricted Sites zone).
Medium - V-6290 - SV-45330r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI113
Vuln IDs
  • V-6290
Rule IDs
  • SV-45330r1_rule
Unsigned code is potentially harmful, especially when coming from an untrusted zone. ActiveX controls can contain potentially malicious code and must only be allowed to be downloaded from trusted sites. They must also be digitally signed.System Administrator
Checks: C-42679r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Download unsigned ActiveX controls" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1004 is REG_DWORD = 3, this is not a finding.

Fix: F-38727r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Download unsigned ActiveX controls" to "Enabled", and select "Disable" from the drop-down box.

b
The Initialize and script ActiveX controls not marked as safe property must be disallowed (Restricted Sites zone).
Medium - V-6291 - SV-45403r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI114
Vuln IDs
  • V-6291
Rule IDs
  • SV-45403r1_rule
ActiveX controls not marked safe for scripting should not be executed. Although this is not a complete security measure for a control to be marked safe for scripting, if a control is not marked safe, it should not be initialized and executed.System Administrator
Checks: C-42752r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Initialize and script ActiveX controls not marked as safe" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1201 is REG_DWORD = 3, this is not a finding.

Fix: F-38800r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Initialize and script ActiveX controls not marked as safe" to "Enabled", and select "Disable" from the drop-down box.

b
ActiveX controls and plug-ins must be disallowed (Restricted Sites zone).
Medium - V-6292 - SV-45072r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI115
Vuln IDs
  • V-6292
Rule IDs
  • SV-45072r1_rule
This policy setting allows you to manage whether ActiveX controls and plug-ins can be run on pages from the specified zone. ActiveX controls not marked as safe should not be executed. If you enable this policy setting, controls and plug-ins can run without user intervention. If you disable this policy setting, controls and plug-ins are prevented from running.System Administrator
Checks: C-42444r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Run ActiveX controls and plugins" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1200 is REG_DWORD = 3, this is not a finding.

Fix: F-38479r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Run ActiveX controls and plugins" to "Enabled", and select "Disable" from the drop-down box.

b
ActiveX controls marked safe for scripting must be disallowed (Restricted Sites zone).
Medium - V-6293 - SV-45074r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI116
Vuln IDs
  • V-6293
Rule IDs
  • SV-45074r1_rule
This policy setting allows management of whether ActiveX controls marked safe for scripting can interact with a script. If you enable this policy setting, script interaction can occur automatically without user intervention. ActiveX controls not marked as safe for scripting should not be executed. Although this is not a complete security measure for a control to be marked safe for scripting, if a control is not marked safe, it should not be initialized and executed.System Administrator
Checks: C-42446r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Script ActiveX controls marked safe for scripting" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1405 is REG_DWORD = 3, this is not a finding.

Fix: F-38481r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Script ActiveX controls marked safe for scripting" to "Enabled", and select "Disable" from the drop-down box.

b
File downloads must be disallowed (Restricted Sites zone).
Medium - V-6294 - SV-45150r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI119
Vuln IDs
  • V-6294
Rule IDs
  • SV-45150r1_rule
Sites located in the Restricted Sites Zone are more likely to contain malicious payloads and therefore downloads from this zone should be blocked. Files should not be able to be downloaded from sites that are considered restricted. This policy setting allows you to manage whether file downloads are permitted from the zone. This option is determined by the zone of the page with the link causing the download, not the zone from which the file is delivered.System Administrator
Checks: C-42493r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow file downloads" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1803 is REG_DWORD = 3, this is not a finding.

Fix: F-38546r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow file downloads" to "Enabled", and select "Disable" from the drop-down box.

b
Font downloads must be disallowed (Restricted Sites zone).
Medium - V-6295 - SV-45159r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI120
Vuln IDs
  • V-6295
Rule IDs
  • SV-45159r1_rule
It is possible that a font could include malformed data that would cause Internet Explorer to crash when it attempts to load and render the font. Downloads of fonts can sometimes contain malicious code. Files should not be downloaded from restricted sites. This policy setting allows you to manage whether pages of the zone may download HTML fonts.System Administrator
Checks: C-42503r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow font downloads" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1604 is REG_DWORD = 3, this is not a finding.

Fix: F-38556r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow font downloads" to "Enabled", and select "Disable" from the drop-down box.

b
Accessing data sources across domains must be disallowed (Restricted Sites zone).
Medium - V-6297 - SV-45069r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI122
Vuln IDs
  • V-6297
Rule IDs
  • SV-45069r1_rule
The ability to access data zones across domains could cause the user to unknowingly access content hosted on an unauthorized server. This policy setting allows you to manage whether Internet Explorer can access data from another security zone using the Microsoft XML Parser (MSXML) or ActiveX Data Objects (ADO).System Administrator
Checks: C-42441r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Access data sources across domains" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1406 is REG_DWORD = 3, this is not a finding.

Fix: F-38476r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Access data sources across domains" to "Enabled", and select "Disable" from the drop-down box.

b
The Allow META REFRESH property must be disallowed (Restricted Sites zone).
Medium - V-6298 - SV-45324r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI123
Vuln IDs
  • V-6298
Rule IDs
  • SV-45324r1_rule
It is possible that users will unknowingly be redirected to a site hosting malicious content. "Allow META REFRESH" must have a level of protection based upon the site being browsed. This policy setting allows you to manage whether a user's browser can be redirected to another web page if the author of the web page uses the Meta Refresh setting to redirect browsers to another web page.System Administrator
Checks: C-42672r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow META REFRESH" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1608 is REG_DWORD = 3, this is not a finding.

Fix: F-38720r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow META REFRESH" to "Enabled", and select "Disable" from the drop-down box.

b
Functionality to drag and drop or copy and paste files must be disallowed (Restricted Sites zone).
Medium - V-6301 - SV-45213r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI126
Vuln IDs
  • V-6301
Rule IDs
  • SV-45213r1_rule
Content hosted on sites located in the Restricted Sites zone are more likely to contain malicious payloads and therefore this feature should be blocked for this zone. Drag and drop or copy and paste files must have a level of protection based upon the site being accessed.System Administrator
Checks: C-42561r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow drag and drop or copy and paste files" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1802 is REG_DWORD=3, this is not a finding.

Fix: F-38609r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow drag and drop or copy and paste files" to "Enabled", and select "Disable" from the drop-down box.

b
Installation of desktop items must be disallowed (Restricted Sites zone).
Medium - V-6302 - SV-45216r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI127
Vuln IDs
  • V-6302
Rule IDs
  • SV-45216r1_rule
Active Desktop items could contain links to unauthorized websites or other undesirable content. It is prudent to prevent users from installing desktop items from this security zone. Installation of items must have a level of protection based upon the site being accessed. This policy setting allows you to manage whether users can install Active Desktop items from this zone.System Administrator
Checks: C-42564r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow installation of desktop items" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1800 is REG_DWORD = 3, this is not a finding.

Fix: F-38612r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow installation of desktop items" to "Enabled", and select "Disable" from the drop-down box.

b
Launching programs and files in IFRAME must be disallowed (Restricted Sites zone).
Medium - V-6303 - SV-45267r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI128
Vuln IDs
  • V-6303
Rule IDs
  • SV-45267r1_rule
This policy setting allows you to manage whether applications may be run and files may be downloaded from an IFRAME reference in the HTML of the pages in this zone. Launching of programs in IFRAME must have a level of protection based upon the site being accessed. If you enable this policy setting, applications can run and files can be downloaded from IFRAMEs on the pages in this zone without user intervention. If you disable this setting, users are prevented from running applications and downloading files from IFRAMEs on the pages in this zone.System Administrator
Checks: C-42614r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Launching applications and files in an IFRAME" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1804 is REG_DWORD = 3, this is not a finding.

Fix: F-38663r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Launching applications and files in an IFRAME" to "Enabled", and select "Disable" from the drop-down box.

b
Navigating windows and frames across different domains must be disallowed (Restricted Sites zone).
Medium - V-6304 - SV-45281r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI129
Vuln IDs
  • V-6304
Rule IDs
  • SV-45281r1_rule
Frames navigating across different domains are a security concern, because the user may think they are accessing pages on one site while they are actually accessing pages on another site. It is possible that a website hosting malicious content could use this feature in a manner similar to cross site scripting. This policy setting allows you to manage the opening of sub-frames and access of applications across different domains.System Administrator
Checks: C-42628r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Navigate windows and frames across different domains" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1607 is REG_DWORD = 3, this is not a finding.

Fix: F-38677r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Navigate windows and frames across different domains" to "Enabled", and select "Disable" from the drop-down box.

b
Rule Title: Userdata persistence must be disallowed (Restricted Sites zone).
Medium - V-6307 - SV-45482r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI132
Vuln IDs
  • V-6307
Rule IDs
  • SV-45482r1_rule
Userdata persistence must have a level of protection based upon the site being accessed. This policy setting allows you to manage the preservation of information in the browser's history, in favorites, in an XML store, or directly within a web page saved to disk. When a user returns to a persisted page, the state of the page can be restored if this policy setting is not appropriately configured.System Administrator
Checks: C-42831r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Userdata persistence" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1606 is REG_DWORD = 3, this is not a finding.

Fix: F-38879r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Userdata persistence" to "Enabled", and select "Disable" from the drop-down box

b
Active scripting must be disallowed (Restricted Sites Zone).
Medium - V-6308 - SV-45071r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI133
Vuln IDs
  • V-6308
Rule IDs
  • SV-45071r1_rule
Active scripts hosted on sites located in this zone are more likely to contain malicious code. Active scripting must have a level of protection based upon the site being accessed. This policy setting allows you to manage whether script code on pages in the zone are run.System Administrator
Checks: C-42443r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow active scripting" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1400 is REG_DWORD = 3, this is not a finding.

Fix: F-38478r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow active scripting" to "Enabled", and select "Disable" from the drop-down box.

b
Clipboard operations via script must be disallowed (Restricted Sites zone).
Medium - V-6309 - SV-45126r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI134
Vuln IDs
  • V-6309
Rule IDs
  • SV-45126r1_rule
A malicious script could use the clipboard in an undesirable manner, for example, if the user had recently copied confidential information to the clipboard while editing a document, a malicious script could harvest that information. It might be possible to exploit other vulnerabilities in order to send the harvested data to the attacker. Allow paste operations via script must have level of protection based upon the site being accessed.System Administrator
Checks: C-42474r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow cut, copy or paste operations from the clipboard via script" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1407 is REG_DWORD = 3, this is not a finding.

Fix: F-38522r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow cut, copy or paste operations from the clipboard via script" to "Enabled", and select "Disable" from the drop-down box.

b
Logon options must be configured and enforced (Restricted Sites zone).
Medium - V-6311 - SV-45271r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI136
Vuln IDs
  • V-6311
Rule IDs
  • SV-45271r1_rule
Users could submit credentials to servers operated by malicious individuals who could then attempt to connect to legitimate servers with those captured credentials. Care must be taken with user credentials, automatic logon performance, and how default Windows credentials are passed to websites. This policy setting allows management of settings for logon options. If you enable this policy setting, you can choose from varying logon options. “Anonymous logon” disables HTTP authentication and uses the guest account only for the Common Internet File System (CIFS) protocol. “Prompt for user name and password” queries users for user IDs and passwords. After a user is queried, these values can be used silently for the remainder of the session. “Automatic logon only in Intranet zone” queries users for user IDs and passwords in other zones. After a user is queried, these values can be used silently for the remainder of the session. “Automatic logon with current user name and password” attempts logon using Windows NT Challenge Response. If Windows NT Challenge Response is supported by the server, the logon uses the user's network user name and password for login. If Windows NT Challenge Response is not supported by the server, the user is queried to provide the user name and password. If you disable this policy setting, logon is set to “Automatic logon only in Intranet zone”. If you do not configure this policy setting, logon is set to “Automatic logon only in Intranet zone”. The most secure option is to configure this setting to “Enabled”; “Anonymous logon”. This will prevent users from submitting credentials to servers in this security zone.System Administrator
Checks: C-42618r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Logon options" must be "Enabled", and "Anonymous logon" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1A00 is REG_DWORD = 196608 (decimal), this is not a finding.

Fix: F-38667r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Logon options" to "Enabled", and select "Anonymous logon" from the drop-down box.

b
Java permissions must be disallowed (Restricted Sites zone).
Medium - V-7007 - SV-45263r2_rule
RMF Control
Severity
Medium
CCI
Version
DTBI121
Vuln IDs
  • V-7007
Rule IDs
  • SV-45263r2_rule
Java applications could contain malicious code; sites located in this security zone are more likely to be hosted by malicious individuals. This policy setting allows you to manage permissions for Java applets. If you enable this policy setting, options can be chosen from the drop-down box. Use of Custom will control permissions settings individually. Use of Low Safety enables applets to perform all operations. Use of Medium Safety enables applets to run in their sandbox (an area in memory outside of which the program cannot make calls), plus capabilities like scratch space (a safe and secure storage area on the client computer) and user-controlled file I/O. Use of High Safety enables applets to run in their sandbox. If you disable this policy setting, Java applets cannot run. If you do not configure this policy setting, the permission is set to High Safety.System Administrator
Checks: C-42610r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Java permissions" must be "Enabled", and "Disable Java" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1C00 is REG_DWORD = 0, this is not a finding.

Fix: F-38659r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Java permissions" to "Enabled", and select "Disable Java" from the drop-down box.

b
Automatic configuration of Internet Explorer connections must be disallowed.
Medium - V-15490 - SV-45107r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI305
Vuln IDs
  • V-15490
Rule IDs
  • SV-45107r1_rule
This setting specifies to automatically detect the proxy server settings used to connect to the Internet and customize Internet Explorer. This setting specifies that Internet Explorer use the configuration settings provided in a file by the system administrator. If you enable this policy setting, the user will not be able to do automatic configuration. You can import current connection settings using Internet Explorer Maintenance under Admin Templates using group policy editor. If you disable or do not configure this policy setting, the user will have the freedom to automatically configure these settings.System AdministratorInformation Assurance Officer
Checks: C-42464r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Disable changing Automatic Configuration settings" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Control Panel Criteria: If the value Autoconfig is REG_DWORD = 1 (Hex), this is not a finding.

Fix: F-38506r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Disable changing Automatic Configuration settings" to "Enabled".

b
Participation in the Customer Experience Improvement Program must be disallowed.
Medium - V-15492 - SV-45282r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI315
Vuln IDs
  • V-15492
Rule IDs
  • SV-45282r1_rule
This setting controls whether users can participate in the Microsoft Customer Experience Improvement Program to help improve Microsoft applications. When users choose to participate in the Customer Experience Improvement Program (CEIP), applications automatically send information to Microsoft about how the applications are used. This information is combined with other CEIP data to help Microsoft solve problems and to improve the products and features customers use most often. This feature does not collect users' names, addresses, or any other identifying information except the IP address that is used to send the data. By default, users have the opportunity to opt into participation in the CEIP the first time they run an application. If an organization has policies that govern the use of external resources such as the CEIP, allowing users to opt in to the program might cause them to violate these policies.System AdministratorInformation Assurance Officer
Checks: C-42629r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Prevent participation in the Customer Experience Improvement Program" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\SQM Criteria: If the value DisableCustomerImprovementProgram is REG_DWORD = 0, this is not a finding.

Fix: F-38678r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Prevent participation in the Customer Experience Improvement Program" to "Enabled".

b
Security checking features must be enforced.
Medium - V-15494 - SV-45302r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI325
Vuln IDs
  • V-15494
Rule IDs
  • SV-45302r1_rule
This policy setting turns off the Security Settings Check feature, which checks Internet Explorer security settings to determine when the settings put Internet Explorer at risk. If you enable this policy setting, the security settings check will not be performed. If you disable or do not configure this policy setting, the security settings check will be performed. System AdministratorInformation Assurance Officer
Checks: C-42650r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Turn off the Security Settings Check feature" must be "Disabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Security Criteria: If the value DisableSecuritySettingsCheck is REG_DWORD = 0, this is not a finding.

Fix: F-38698r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Turn off the Security Settings Check feature" to "Disabled".

b
Active content from CDs must be disallowed to run on user machines.
Medium - V-15497 - SV-45070r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI340
Vuln IDs
  • V-15497
Rule IDs
  • SV-45070r1_rule
This policy setting allows you to manage whether users receive a dialog requesting permission for active content on a CD to run. If you enable this policy setting, active content on a CD will run without a prompt. If you disable this policy setting, active content on a CD will always prompt before running. If you do not configure this policy, users can choose whether to be prompted before running active content on a CD.System AdministratorInformation Assurance Officer
Checks: C-42442r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Advanced Page -> "Allow active content from CDs to run on user machines" must be "Disabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_LOCALMACHINE_LOCKDOWN\Settings Criteria: If the value LOCALMACHINE_CD_UNLOCK is REG_DWORD = 0, this is not a finding.

Fix: F-38477r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Advanced Page -> "Allow active content from CDs to run on user machines" to "Disabled".

b
Software must be disallowed to run or install with invalid signatures.
Medium - V-15499 - SV-45311r2_rule
RMF Control
Severity
Medium
CCI
Version
DTBI350
Vuln IDs
  • V-15499
Rule IDs
  • SV-45311r2_rule
Microsoft ActiveX controls and file downloads often have digital signatures attached that certify the file's integrity and the identity of the signer (creator) of the software. Such signatures help ensure unmodified software is downloaded and the user can positively identify the signer to determine whether you trust them enough to run their software. The validity of unsigned code cannot be ascertained.System AdministratorInformation Assurance OfficerDCMC-1
Checks: C-42659r2_chk

Note: Some legitimate software and controls may have an invalid signature. You should carefully test such software in isolation before it is allowed to be used on an organization's network. The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Advanced Page -> "Allow software to run or install even if the signature is invalid" must be "Disabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Download Criteria: If the value RunInvalidSignatures is REG_DWORD = 0, this is not a finding.

Fix: F-38707r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Advanced Page -> "Allow software to run or install even if the signature is invalid" to "Disabled".

b
Third-party browser extensions must be disallowed.
Medium - V-15500 - SV-45445r2_rule
RMF Control
Severity
Medium
CCI
Version
DTBI355
Vuln IDs
  • V-15500
Rule IDs
  • SV-45445r2_rule
This policy setting allows you to manage whether Internet Explorer will launch COM add-ons, known as browser helper objects such as toolbars. Browser helper objects may contain flaws such as buffer overruns which impact Internet Explorer's performance or stability. If you enable this policy setting, Internet Explorer automatically launches any browser helper objects that are installed on the user's computer. If you disable this policy setting, browser helper objects do not launch. If you do not configure this policy, Internet Explorer automatically launches any browser helper objects that are installed on the user's computer. System AdministratorInformation Assurance OfficerECSC-1
Checks: C-42794r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Advanced Page -> "Allow third-party browser extensions" must be "Disabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main Criteria: If the value Enable Browser Extensions is REG_SZ = no, this is not a finding.

Fix: F-38842r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Advanced Page -> "Allow third-party browser extensions" to "Disabled".

b
Checking for server certificate revocation must be enforced.
Medium - V-15502 - SV-45335r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI365
Vuln IDs
  • V-15502
Rule IDs
  • SV-45335r1_rule
This policy setting allows you to manage whether Internet Explorer will check revocation status of servers' certificates. Certificates are revoked when they have been compromised or are no longer valid, and this option protects users from submitting confidential data to a site that may be fraudulent or not secure. If you enable this policy setting, Internet Explorer will check to see if server certificates have been revoked. If you disable this policy setting, Internet Explorer will not check server certificates to see if they have been revoked. If you do not configure this policy setting, Internet Explorer will not check server certificates to see if they have been revoked.System AdministratorInformation Assurance Officer
Checks: C-42684r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Advanced Page -> "Check for server certificate revocation" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings Criteria: If the value CertificateRevocation is REG_DWORD = 1, this is not a finding.

Fix: F-38731r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Advanced Page -> "Check for server certificate revocation" to "Enabled".

b
Checking for signatures on downloaded programs must be enforced.
Medium - V-15503 - SV-45120r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI370
Vuln IDs
  • V-15503
Rule IDs
  • SV-45120r1_rule
This policy setting allows you to manage whether Internet Explorer checks for digital signatures (which identifies the publisher of signed software and verifies it has not been modified or tampered with) on user computers before downloading executable programs. If you enable this policy setting, Internet Explorer will check the digital signatures of executable programs and display their identities before downloading them to user computers. If you disable this policy setting, Internet Explorer will not check the digital signatures of executable programs or display their identities before downloading them to user computers. If you do not configure this policy, Internet Explorer will not check the digital signatures of executable programs or display their identities before downloading them to user computers.System AdministratorInformation Assurance Officer
Checks: C-42472r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Advanced Page -> "Check for signatures on downloaded programs" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Download Criteria: If the value CheckExeSignatures is REG_SZ = yes, this is not a finding.

Fix: F-38517r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Advanced Page -> "Check for signatures on downloaded programs" to "Enabled".

b
All network paths (UNCs) for Intranet sites must be disallowed.
Medium - V-15504 - SV-45079r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI375
Vuln IDs
  • V-15504
Rule IDs
  • SV-45079r1_rule
Some UNC paths could refer to servers not managed by the organization, which means they could host malicious content; and therefore, it is safest to not include all UNC paths in the Intranet Sites zone. This policy setting controls whether URLs representing UNCs are mapped into the local Intranet security zone. If you enable this policy setting, all network paths are mapped into the Intranet Zone. If you disable this policy setting, network paths are not necessarily mapped into the Intranet Zone (other rules might map one there). If you do not configure this policy setting, users choose whether network paths are mapped into the Intranet Zone.System AdministratorInformation Assurance Officer
Checks: C-42451r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> "Intranet Sites: Include all network paths (UNCs)" must be "Disabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\ZoneMap Criteria: If the value UNCAsIntranet is REG_DWORD = 0, this is not a finding.

Fix: F-38486r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> "Intranet Sites: Include all network paths (UNCs)" to "Disabled".

b
Script-initiated windows without size or position constraints must be disallowed (Internet zone).
Medium - V-15507 - SV-45296r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI385
Vuln IDs
  • V-15507
Rule IDs
  • SV-45296r1_rule
This policy setting allows you to manage restrictions on script-initiated pop-up windows and windows including the title and status bars. If you enable this policy setting, Windows Restrictions security will not apply in this zone. The security zone runs without the added layer of security provided by this feature. If you disable this policy setting, the possible harmful actions contained in script-initiated pop-up windows and windows including the title and status bars cannot be run. This Internet Explorer security feature will be on in this zone as dictated by the Scripted Windows Security Restrictions feature control setting for the process. If you do not configure this policy setting, the possible harmful actions contained in script-initiated pop-up windows and windows including the title and status bars cannot be run. This Internet Explorer security feature will be on in this zone as dictated by the Scripted Windows Security Restrictions feature control setting for the process.System AdministratorInformation Assurance Officer
Checks: C-42644r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Allow script-initiated windows without size or position constraints" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 2102 is REG_DWORD = 3, this is not a finding.

Fix: F-38692r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Allow script-initiated windows without size or position constraints" to "Enabled", and select "Disable" from the drop-down box.

b
Script-initiated windows without size or position constraints must be disallowed (Restricted Sites zone).
Medium - V-15508 - SV-45297r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI390
Vuln IDs
  • V-15508
Rule IDs
  • SV-45297r1_rule
This policy setting allows you to manage restrictions on script-initiated pop-up windows and windows including the title and status bars. If you enable this policy setting, Windows Restrictions security will not apply in this zone. The security zone runs without the added layer of security provided by this feature. If you disable this policy setting, the possible harmful actions contained in script-initiated pop-up windows and windows including the title and status bars cannot be run. This Internet Explorer security feature will be on in this zone as dictated by the Scripted Windows Security Restrictions feature control setting for the process. If you do not configure this policy setting, the possible harmful actions contained in script-initiated pop-up windows and windows including the title and status bars cannot be run. This Internet Explorer security feature will be on in this zone as dictated by the Scripted Windows Security Restrictions feature control setting for the process.System AdministratorInformation Assurance Officer
Checks: C-42645r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow script-initiated windows without size or position constraints" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 2102 is REG_DWORD = 3, this is not a finding.

Fix: F-38693r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow script-initiated windows without size or position constraints" to "Enabled", and select "Disable" from the drop-down box.

b
Scriptlets must be disallowed (Internet zone).
Medium - V-15509 - SV-45299r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI395
Vuln IDs
  • V-15509
Rule IDs
  • SV-45299r1_rule
This policy setting allows you to manage whether scriptlets can be allowed. Scriptlets hosted on sites located in this zone are more likely to contain malicious code. If you enable this policy setting, users will be able to run scriptlets. If you disable this policy setting, users will not be able to run scriptlets. If you do not configure this policy setting, a scriptlet can be enabled or disabled by the user. System AdministratorInformation Assurance Officer
Checks: C-42647r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Allow Scriptlets" must be "Enabled", and "Disable" from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 1209 is REG_DWORD = 3, this is not a finding.

Fix: F-38695r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Allow Scriptlets" to "Enabled", and select "Disable" from the drop-down box.

b
Automatic prompting for file downloads must be disallowed (Internet zone).
Medium - V-15513 - SV-45108r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI415
Vuln IDs
  • V-15513
Rule IDs
  • SV-45108r1_rule
This policy setting determines whether users will be prompted for non user-initiated file downloads. Regardless of this setting, users will receive file download dialogs for user-initiated downloads. Users may accept downloads that they did not request, and those downloaded files may include malicious code. If you enable this setting, users will receive a file download dialog for automatic download attempts. If you disable or do not configure this setting, file downloads that are not user-initiated will be blocked, and users will see the information bar instead of the file download dialog. Users can then click the information bar to allow the file download prompt.System AdministratorInformation Assurance Officer
Checks: C-42465r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Automatic prompting for file downloads" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 2200 is REG_DWORD = 3, this is not a finding.

Fix: F-38507r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Automatic prompting for file downloads" to "Enabled", and select "Disable" from the drop-down box.

b
Java permissions must be disallowed (Local Machine zone).
Medium - V-15515 - SV-45252r2_rule
RMF Control
Severity
Medium
CCI
Version
DTBI425
Vuln IDs
  • V-15515
Rule IDs
  • SV-45252r2_rule
Java applications could contain malicious code. This policy setting allows you to manage permissions for Java applets. If you enable this policy setting, options can be chosen from the drop-down box. Use of Custom will control permissions settings individually. Use of Low Safety enables applets to perform all operations. Use of Medium Safety enables applets to run in their sandbox (an area in memory outside of which the program cannot make calls), plus capabilities like scratch space (a safe and secure storage area on the client computer) and user-controlled file I/O. Use of High Safety enables applets to run in their sandbox. If you disable this policy setting, Java applets cannot run. If you do not configure this policy setting, the permission is set to High Safety.System AdministratorInformation Assurance Officer
Checks: C-42599r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Local Machine Zone -> "Java permissions" must be "Enabled", and "Disable Java" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following keys: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0 Criteria: If the value 1C00 is REG_DWORD = 0, this is not a finding.

Fix: F-38648r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Local Machine Zone -> "Java permissions" to "Enabled", and "Disable Java" selected from the drop-down box.

b
Java permissions must be disallowed (Locked Down Local Machine zone).
Medium - V-15516 - SV-45255r2_rule
RMF Control
Severity
Medium
CCI
Version
DTBI430
Vuln IDs
  • V-15516
Rule IDs
  • SV-45255r2_rule
Java applications could contain malicious code. This policy setting allows you to manage permissions for Java applets. If you enable this policy setting, options can be chosen from the drop-down box. Use of Custom will control permissions settings individually. Use of Low Safety enables applets to perform all operations. Use of Medium Safety enables applets to run in their sandbox (an area in memory outside of which the program cannot make calls), plus capabilities like scratch space (a safe and secure storage area on the client computer) and user-controlled file I/O. Use of High Safety enables applets to run in their sandbox. If you disable this policy setting, Java applets cannot run. If you do not configure this policy setting, the permission is set to High Safety.System AdministratorInformation Assurance Officer
Checks: C-42602r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Locked-Down Local Machine Zone -> "Java permissions" must be "Enabled", and "Disable Java" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following keys: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Lockdown_Zones\0 Criteria: If the value 1C00 is REG_DWORD = 0, this is not a finding.

Fix: F-38651r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Locked-Down Local Machine Zone -> "Java permissions" to "Enabled", and select "Disable Java" from the drop-down box.

b
Java permissions must be disallowed (Locked Down Intranet zone).
Medium - V-15517 - SV-45254r2_rule
RMF Control
Severity
Medium
CCI
Version
DTBI435
Vuln IDs
  • V-15517
Rule IDs
  • SV-45254r2_rule
Java applications could contain malicious code. This policy setting allows you to manage permissions for Java applets. If you enable this policy setting, options can be chosen from the drop-down box. Use of Custom will control permissions settings individually. Use of Low Safety enables applets to perform all operations. Use of Medium Safety enables applets to run in their sandbox (an area in memory outside of which the program cannot make calls), plus capabilities like scratch space (a safe and secure storage area on the client computer) and user-controlled file I/O. Use of High Safety enables applets to run in their sandbox. If you disable this policy setting, Java applets cannot run. If you do not configure this policy setting, the permission is set to High Safety.System AdministratorInformation Assurance Officer
Checks: C-42601r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Locked-Down Intranet Zone -> "Java permissions" must be "Enabled", and "Disable Java" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following keys: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Lockdown_Zones\1 Criteria: If the value 1C00 is REG_DWORD = 0, this is not a finding.

Fix: F-38650r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Locked-Down Intranet Zone -> "Java permissions" to "Enabled", and select "Disable Java" from the drop-down box.

b
Java permissions must be disallowed (Locked Down Trusted Sites zone).
Medium - V-15518 - SV-45261r2_rule
RMF Control
Severity
Medium
CCI
Version
DTBI440
Vuln IDs
  • V-15518
Rule IDs
  • SV-45261r2_rule
Java applications could contain malicious code. This policy setting allows you to manage permissions for Java applets. If you enable this policy setting, options can be chosen from the drop-down box. Use of Custom will control permissions settings individually. Use of Low Safety enables applets to perform all operations. Use of Medium Safety enables applets to run in their sandbox (an area in memory outside of which the program cannot make calls), plus capabilities like scratch space (a safe and secure storage area on the client computer) and user-controlled file I/O. Use of High Safety enables applets to run in their sandbox. If you disable this policy setting, Java applets cannot run. If you do not configure this policy setting, the permission is set to High Safety.System AdministratorInformation Assurance Officer
Checks: C-42608r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Locked-Down Trusted Sites Zone -> "Java permissions" must be "Enabled", and "Disable Java" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following keys: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Lockdown_Zones\2 Criteria: If the value 1C00 is REG_DWORD = 0, this is not a finding.

Fix: F-38657r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Locked-Down Trusted Sites Zone -> "Java permissions" to "Enabled", and select "Disable Java" from the drop-down box.

b
Java permissions must be disallowed (Locked Down Internet zone).
Medium - V-15519 - SV-45253r2_rule
RMF Control
Severity
Medium
CCI
Version
DTBI445
Vuln IDs
  • V-15519
Rule IDs
  • SV-45253r2_rule
Java applications could contain malicious code; sites located in this security zone are more likely to be hosted by malicious individuals. This policy setting allows you to manage permissions for Java applets. If you enable this policy setting, options can be chosen from the drop-down box. Use of Custom will control permissions settings individually. Use of Low Safety enables applets to perform all operations. Use of Medium Safety enables applets to run in their sandbox (an area in memory outside of which the program cannot make calls), plus capabilities like scratch space (a safe and secure storage area on the client computer) and user-controlled file I/O. Use of High Safety enables applets to run in their sandbox. If you disable this policy setting, Java applets cannot run. If you do not configure this policy setting, the permission is set to High Safety. System AdministratorInformation Assurance Officer
Checks: C-42600r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Locked-Down Internet Zone -> "Java permissions" must be "Enabled", and "Disable Java" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following keys: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Lockdown_Zones\3 Criteria: If the value 1C00 is REG_DWORD = 0, this is not a finding.

Fix: F-38649r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Locked-Down Internet Zone -> "Java permissions" to "Enabled", and select "Disable Java" from the drop-down box.

b
Java permissions must be disallowed (Locked Down Restricted Sites zone).
Medium - V-15520 - SV-45257r2_rule
RMF Control
Severity
Medium
CCI
Version
DTBI450
Vuln IDs
  • V-15520
Rule IDs
  • SV-45257r2_rule
Java applications could contain malicious code; sites located in this security zone are more likely to be hosted by malicious individuals. This policy setting allows you to manage permissions for Java applets. If you enable this policy setting, options can be chosen from the drop-down box. Use of Custom will control permissions settings individually. Use of Low Safety enables applets to perform all operations. Use of Medium Safety enables applets to run in their sandbox (an area in memory outside of which the program cannot make calls), plus capabilities like scratch space (a safe and secure storage area on the client computer) and user-controlled file I/O. Use of High Safety enables applets to run in their sandbox. If you disable this policy setting, Java applets cannot run. If you do not configure this policy setting, the permission is set to High Safety.System AdministratorInformation Assurance Officer
Checks: C-42604r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Locked-Down Restricted Sites Zone -> "Java permissions" must be "Enabled", and "Disable Java" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following keys: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Lockdown_Zones\4 Criteria: If the value 1C00 is REG_DWORD = 0, this is not a finding.

Fix: F-38653r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Locked-Down Restricted Sites Zone -> "Java permissions" to "Enabled", and select "Disable Java" from the drop-down box.

b
XAML files must be disallowed (Internet zone).
Medium - V-15521 - SV-45493r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI455
Vuln IDs
  • V-15521
Rule IDs
  • SV-45493r1_rule
These are eXtensible Application Markup Language (XAML) files. XAML is an XML-based declarative markup language commonly used for creating rich user interfaces and graphics that leverage the Windows Presentation Foundation. If you enable this policy setting and the drop-down box is set to Enable, XAML files will be automatically loaded inside Internet Explorer. Users will not be able to change this behavior. If the drop-down box is set to Prompt, users will receive a prompt for loading XAML files. If you disable this policy setting, XAML files will not be loaded inside Internet Explorer. Users will not be able to change this behavior. If you do not configure this policy setting, users will have the freedom to decide whether to load XAML files inside Internet Explorer.System AdministratorInformation Assurance Officer
Checks: C-42843r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Allow loading of XAML files" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 2402 is REG_DWORD = 3, this is not a finding.

Fix: F-38891r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Allow loading of XAML files" to "Enabled", and select "Disable" from the drop-down box.

b
XAML files must be disallowed (Restricted Sites zone).
Medium - V-15522 - SV-45497r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI460
Vuln IDs
  • V-15522
Rule IDs
  • SV-45497r1_rule
These are eXtensible Application Markup Language (XAML) files. XAML is an XML-based declarative markup language commonly used for creating rich user interfaces and graphics that leverage the Windows Presentation Foundation. If you enable this policy setting and the drop-down box is set to Enable, XAML files will be automatically loaded inside Internet Explorer. Users will not be able to change this behavior. If the drop-down box is set to Prompt, users will receive a prompt for loading XAML files. If you disable this policy setting, XAML files will not be loaded inside Internet Explorer. Users will not be able to change this behavior. If you do not configure this policy setting, users will have the freedom to decide whether to load XAML files inside Internet Explorer.System AdministratorInformation Assurance Officer
Checks: C-42846r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow loading of XAML files" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 2402 is REG_DWORD = 3, this is not a finding.

Fix: F-38894r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow loading of XAML files" to "Enabled", and select "Disable" from the drop-down box.

b
MIME sniffing must be disallowed (Internet zone).
Medium - V-15523 - SV-45276r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI465
Vuln IDs
  • V-15523
Rule IDs
  • SV-45276r1_rule
This policy setting allows you to manage MIME sniffing for file promotion from one type to another based on a MIME sniff. A MIME sniff is the recognition by Internet Explorer of the file type based on a bit signature. If you enable this policy setting, the MIME Sniffing Safety Feature will not apply in this zone. The security zone will run without the added layer of security provided by this feature. If you disable this policy setting, the actions that may be harmful cannot run; this Internet Explorer security feature will be turned on in this zone, as dictated by the feature control setting for the process. If you do not configure this policy setting, the MIME Sniffing Safety Feature will not apply in this zone.System AdministratorInformation Assurance Officer
Checks: C-42623r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Enable MIME Sniffing" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 2100 is REG_DWORD = 3, this is not a finding.

Fix: F-38672r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Enable MIME Sniffing" to "Enabled", and select "Disable" from the drop-down box.

b
MIME sniffing must be disallowed (Restricted Sites zone).
Medium - V-15524 - SV-45278r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI470
Vuln IDs
  • V-15524
Rule IDs
  • SV-45278r1_rule
This policy setting allows you to manage MIME sniffing for file promotion from one type to another based on a MIME sniff. A MIME sniff is the recognition by Internet Explorer of the file type based on a bit signature. If you enable this policy setting, the MIME Sniffing Safety Feature will not apply in this zone. The security zone will run without the added layer of security provided by this feature. If you disable this policy setting, the actions that may be harmful cannot run; this Internet Explorer security feature will be turned on in this zone, as dictated by the feature control setting for the process. If you do not configure this policy setting, the MIME Sniffing Safety Feature will not apply in this zone. System AdministratorInformation Assurance Officer
Checks: C-42625r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Enable MIME Sniffing" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 2100 is REG_DWORD = 3, this is not a finding.

Fix: F-38674r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Enable MIME Sniffing" to "Enabled", and select "Disable" from the drop-down box.

b
First-Run prompt ability must be disallowed (Internet zone).
Medium - V-15525 - SV-45155r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI475
Vuln IDs
  • V-15525
Rule IDs
  • SV-45155r1_rule
This policy setting controls the First Run response that users see on a zone-by-zone basis. When a user encounters a new control that has not previously run in Internet Explorer, they may be prompted to approve the control. This feature determines if the user gets the prompt or not. If you enable this policy setting, the Gold Bar prompt will be turned off in the corresponding zone. If you disable this policy setting, the Gold Bar prompt will be turned on in the corresponding zone. If you do not configure this policy setting, the first-run prompt is turned off by default.System AdministratorInformation Assurance Officer
Checks: C-42498r3_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Turn off first-run prompt" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 1208 is REG_DWORD = 3, this is not a finding.

Fix: F-38551r3_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Turn off first-run prompt" to "Enabled", and select "Disable" from the drop-down box.

b
First-Run prompt ability must be disallowed (Restricted Sites zone).
Medium - V-15526 - SV-45157r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI480
Vuln IDs
  • V-15526
Rule IDs
  • SV-45157r1_rule
This policy setting controls the First Run response that users see on a zone-by-zone basis. When a user encounters a new control that has not previously run in Internet Explorer, they may be prompted to approve the control. This feature determines if the user gets the prompt or not. If you enable this policy setting, the Gold Bar prompt will be turned off in the corresponding zone. If you disable this policy setting, the Gold Bar prompt will be turned on in the corresponding zone. If you do not configure this policy setting, the first-run prompt is turned off by default.System AdministratorInformation Assurance Officer
Checks: C-42500r2_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Turn off first-run prompt" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1208 is REG_DWORD = 3, this is not a finding.

Fix: F-38553r2_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Turn off first-run prompt" to "Enabled", and select "Disable" from the drop-down box.

b
Protected Mode must be enforced (Internet zone).
Medium - V-15527 - SV-45288r2_rule
RMF Control
Severity
Medium
CCI
Version
DTBI485
Vuln IDs
  • V-15527
Rule IDs
  • SV-45288r2_rule
Protected mode protects Internet Explorer from exploited vulnerabilities by reducing the locations Internet Explorer can write to in the registry and the file system. If you enable this policy setting, Protected Mode will be turned on. Users will not be able to turn off protected mode. If you disable this policy setting, Protected Mode will be turned off. It will revert to Internet Explorer 6 behavior that allows for Internet Explorer to write to the registry and the file system. Users will not be able to turn on protected mode. If you do not configure this policy, users will be able to turn on or off protected mode.System AdministratorInformation Assurance OfficerECSC-1
Checks: C-42635r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Turn on Protected Mode" must be "Enabled", and "Enable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 2500 is REG_DWORD = 0, this is not a finding.

Fix: F-38684r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Turn on Protected Mode" to "Enabled", and select "Enable" from the drop-down box.

b
Protected Mode must be enforced (Restricted Sites zone).
Medium - V-15528 - SV-45290r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI490
Vuln IDs
  • V-15528
Rule IDs
  • SV-45290r1_rule
Protected mode protects Internet Explorer from exploited vulnerabilities by reducing the locations Internet Explorer can write to in the registry and the file system. If you enable this policy setting, Protected Mode will be turned on. Users will not be able to turn off protected mode. If you disable this policy setting, Protected Mode will be turned off. It will revert to Internet Explorer 6 behavior that allows for Internet Explorer to write to the registry and the file system. Users will not be able to turn on protected mode. If you do not configure this policy, users will be able to turn on or off protected mode.System AdministratorInformation Assurance Officer
Checks: C-42637r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Turn on Protected Mode" must be "Enabled", and "Enable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 2500 is REG_DWORD = 0, this is not a finding.

Fix: F-38686r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Turn on Protected Mode" to "Enabled" and select "Enable", from the drop-down box.

b
Pop-up Blocker must be enforced (Internet zone).
Medium - V-15529 - SV-45283r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI495
Vuln IDs
  • V-15529
Rule IDs
  • SV-45283r1_rule
This policy setting allows you to manage whether unwanted pop-up windows appear. Pop-up windows that are opened when the end user clicks a link are not blocked. If you enable this policy setting, most unwanted pop-up windows are prevented from appearing. If you disable this policy setting, pop-up windows are not prevented from appearing. If you do not configure this policy setting, most unwanted pop-up windows are prevented from appearing.System AdministratorInformation Assurance Officer
Checks: C-42630r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Use Pop-up Blocker" must be "Enabled", and "Enable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 1809 is REG_DWORD = 0, this is not a finding.

Fix: F-38679r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Use Pop-up Blocker" to "Enabled", and select "Enable" from the drop-down box.

b
Pop-up Blocker must be enforced (Restricted Sites zone).
Medium - V-15530 - SV-45284r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI500
Vuln IDs
  • V-15530
Rule IDs
  • SV-45284r1_rule
This policy setting allows you to manage whether unwanted pop-up windows appear. Pop-up windows that are opened when the end user clicks a link are not blocked. If you enable this policy setting, most unwanted pop-up windows are prevented from appearing. If you disable this policy setting, pop-up windows are not prevented from appearing. If you do not configure this policy setting, most unwanted pop-up windows are prevented from appearing.System AdministratorInformation Assurance Officer
Checks: C-42631r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Use Pop-up Blocker" must be "Enabled", and "Enable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1809 is REG_DWORD = 0, this is not a finding.

Fix: F-38680r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Use Pop-up Blocker" to "Enabled", and select "Enable" from the drop-down box.

b
Websites in less privileged web content zones must be prevented from navigating into the Internet zone.
Medium - V-15533 - SV-45486r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI515
Vuln IDs
  • V-15533
Rule IDs
  • SV-45486r1_rule
This policy setting allows a user to manage whether websites from less privileged zones, such as Restricted Sites, can navigate into the Internet zone. If this policy setting is enabled, web sites from less privileged zones can open new windows in, or navigate into, this zone. The security zone will run without the added layer of security that is provided by the Protection from Zone Elevation security feature. If Prompt is selected in the drop-down box, a warning is issued to the user that potentially risky navigation is about to occur. If this policy setting is disabled, the potentially risky navigation is prevented. The Internet Explorer security feature will be on in this zone as set by the Protection from Zone Elevation feature control. If this policy setting is not configured, websites from less privileged zones can open new windows in, or navigate into, this zone.System AdministratorInformation Assurance Officer
Checks: C-42835r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Web sites in less privileged Web content zones can navigate into this zone" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 2101 is REG_DWORD = 3, this is not a finding.

Fix: F-38883r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Web sites in less privileged Web content zones can navigate into this zone" to "Enabled", and select "Disable" from the drop-down box.

b
Websites in less privileged web content zones must be prevented from navigating into the Restricted Sites zone.
Medium - V-15534 - SV-45489r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI520
Vuln IDs
  • V-15534
Rule IDs
  • SV-45489r1_rule
This policy setting allows you to manage whether websites from less privileged zones, such as Restricted Sites, can navigate into the Restricted zone. If this policy setting is enabled, websites from less privileged zones can open new windows in, or navigate into, this zone. The security zone will run without the added layer of security that is provided by the Protection from Zone Elevation security feature. If Prompt is selected in the drop-down box, a warning is issued to the user that potentially risky navigation is about to occur. If this policy setting is disabled, the potentially risky navigation is prevented. The Internet Explorer security feature will be on in this zone as set by the Protection from Zone Elevation feature control. If this policy setting is not configured, websites from less privileged zones can open new windows in, or navigate into, this zone.System AdministratorInformation Assurance Officer
Checks: C-42838r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Web sites in less privileged Web content zones can navigate into this zone" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 2101 is REG_DWORD = 3, this is not a finding.

Fix: F-38886r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Web sites in less privileged Web content zones can navigate into this zone" to "Enabled", and select "Disable" from the drop-down box.

b
Allow binary and script behaviors must be disallowed (Restricted Sites zone).
Medium - V-15545 - SV-45098r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI575
Vuln IDs
  • V-15545
Rule IDs
  • SV-45098r1_rule
This policy setting allows you to manage dynamic binary and script behaviors of components that encapsulate specific functionality for HTML elements, to which they were attached. If you enable this policy setting, binary and script behaviors are available. If you select Administrator approved in the drop-down box, only behaviors listed in the Admin-approved Behaviors under Binary Behaviors Security Restriction policy are available. If you disable this policy setting, binary and script behaviors are not available unless applications have implemented a custom security manager. If you do not configure this policy setting, binary and script behaviors are available.System AdministratorInformation Assurance Officer
Checks: C-42456r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow binary and script behaviors" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 2000 is REG_DWORD = 3, this is not a finding.

Fix: F-38498r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow binary and script behaviors" to "Enabled", and select "Disable" from the drop-down box.

b
Automatic prompting for file downloads must be disallowed (Restricted Sites zone).
Medium - V-15546 - SV-45111r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI580
Vuln IDs
  • V-15546
Rule IDs
  • SV-45111r1_rule
This policy setting determines whether users will be prompted for non user-initiated file downloads. Regardless of this setting, users will receive file download dialogs for user-initiated downloads. Users may accept downloads that they did not request, and those downloaded files may include malicious code. If you enable this setting, users will receive a file download dialog for automatic download attempts. If you disable or do not configure this setting, file downloads that are not user-initiated will be blocked, and users will see the information bar instead of the file download dialog. Users can then click the information bar to allow the file download prompt.System AdministratorInformation Assurance Officer
Checks: C-42466r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Automatic prompting for file downloads" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 2200 is REG_DWORD = 3, this is not a finding.

Fix: F-38508r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Automatic prompting for file downloads" to "Enabled", and select "Disable" from the drop-down box.

b
Internet Explorer Processes for MIME handling is not enabled. (Reserved)
Medium - V-15548 - SV-45224r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI590
Vuln IDs
  • V-15548
Rule IDs
  • SV-45224r1_rule
Internet Explorer uses Multipurpose Internet Mail Extensions (MIME) data to determine file handling procedures for files received through a web server. The Consistent MIME Handling\Internet Explorer Processes policy setting determines whether Internet Explorer requires all file-type information provided by web servers to be consistent. For example, if the MIME type of a file is text/plain but the MIME data indicates the file is really an executable file, Internet Explorer changes its extension to reflect this executable status. This capability helps ensure executable code cannot masquerade as other types of data that may be trusted. If you enable this policy setting, Internet Explorer examines all received files and enforces consistent MIME data for them. If you disable or do not configure this policy setting, Internet Explorer does not require consistent MIME data for all received files and will use the MIME data provided by the file. MIME file-type spoofing is a potential threat to an organization. Ensuring these files are consistent and properly labeled helps prevent malicious file downloads from infecting your network.System AdministratorInformation Assurance Officer
Checks: C-42572r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Consistent Mime Handling -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_MIME_HANDLING Criteria: If the value (Reserved) is REG_SZ = 1, this is not a finding.

Fix: F-38620r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Consistent Mime Handling -> "Internet Explorer Processes" to "Enabled".

b
Internet Explorer Processes for MIME sniffing must be enforced (Reserved).
Medium - V-15549 - SV-45227r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI595
Vuln IDs
  • V-15549
Rule IDs
  • SV-45227r1_rule
MIME sniffing is the process of examining the content of a MIME file to determine its context - whether it is a data file, an executable file, or some other type of file. This policy setting determines whether Internet Explorer MIME sniffing will prevent promotion of a file of one type to a more dangerous file type. When set to Enabled, MIME sniffing will never promote a file of one type to a more dangerous file type. Disabling MIME sniffing configures Internet Explorer processes to allow a MIME sniff that promotes a file of one type to a more dangerous file type. For example, promoting a text file to an executable file is a dangerous promotion because any code in the supposed text file would be executed. MIME file-type spoofing is a potential threat to an organization. Ensuring these files are consistently handled helps prevent malicious file downloads from infecting the network. This guide recommends you configure this policy as Enabled for all environments specified in this guide. Note: This setting works in conjunction with, but does not replace, the Consistent MIME Handling settings.System AdministratorInformation Assurance Officer
Checks: C-42575r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Mime Sniffing Safety Feature -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_MIME_SNIFFING Criteria: If the value (Reserved) is REG_SZ = 1, this is not a finding.

Fix: F-38623r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Mime Sniffing Safety Feature -> "Internet Explorer Processes" to "Enabled".

b
Internet Explorer Processes for MK protocol must be enforced (Explorer).
Medium - V-15550 - SV-45228r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI600
Vuln IDs
  • V-15550
Rule IDs
  • SV-45228r1_rule
The MK Protocol Security Restriction policy setting reduces attack surface area by blocking the seldom used MK protocol. Some older web applications use the MK protocol to retrieve information from compressed files. Because the MK protocol is not widely used, it should be blocked wherever it is not needed. Setting this policy to Enabled; blocks the MK protocol for Windows Explorer and Internet Explorer, which causes resources that use the MK protocol to fail. Disabling this setting allows applications to use the MK protocol API. This guide recommends you configure this setting to Enabled to block the MK protocol unless it is specifically needed in the environment. Note: Because resources that use the MK protocol will fail when deploying this setting, ensure none of the applications use the MK protocol.System Administrator
Checks: C-42576r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> MK Protocol Security Restriction -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_DISABLE_MK_PROTOCOL Criteria: If the value explorer.exe is REG_SZ = 1, this is not a finding.

Fix: F-38624r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> MK Protocol Security Restriction -> "Internet Explorer Processes" to "Enabled".

b
Internet Explorer Processes for MK protocol must be enforced (IExplore).
Medium - V-15551 - SV-45229r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI605
Vuln IDs
  • V-15551
Rule IDs
  • SV-45229r1_rule
The MK Protocol Security Restriction policy setting reduces attack surface area by blocking the seldom used MK protocol. Some older web applications use the MK protocol to retrieve information from compressed files. Because the MK protocol is not widely used, it should be blocked wherever it is not needed. Setting this policy to Enabled; blocks the MK protocol for Windows Explorer and Internet Explorer, which causes resources that use the MK protocol to fail. Disabling this setting allows applications to use the MK protocol API. This guide recommends you configure this setting to Enabled to block the MK protocol unless specifically needed in the environment. Note: Because resources that use the MK protocol will fail when deploying this setting, ensure none of the applications use the MK protocol.System Administrator
Checks: C-42577r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> MK Protocol Security Restriction -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_DISABLE_MK_PROTOCOL Criteria: If the value iexplore.exe is REG_SZ = 1, this is not a finding.

Fix: F-38625r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> MK Protocol Security Restriction -> "Internet Explorer Processes" to "Enabled".

b
Internet Explorer Processes for Zone Elevation must be enforced (Reserved).
Medium - V-15552 - SV-45244r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI610
Vuln IDs
  • V-15552
Rule IDs
  • SV-45244r1_rule
Internet Explorer places restrictions on each web page it opens that are dependent upon the location of the web page (such as Internet Zone, Intranet Zone, or Local Machine Zone). Web pages on a local computer have the fewest security restrictions and reside in the Local Machine Zone, which makes the Local Machine Security Zone a prime target for malicious attackers. If you enable this policy setting, any zone can be protected from zone elevation by Internet Explorer processes. This approach stops content running in one zone from gaining the elevated privileges of another zone. If you disable this policy setting, no zone receives such protection from Internet Explorer processes. Because of the severity and relative frequency of zone elevation attacks, this guide recommends that you configure this setting as Enabled in all environments.System Administrator
Checks: C-42593r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Protection From Zone Elevation -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ZONE_ELEVATION Criteria: If the value (Reserved) is REG_SZ = 1, this is not a finding.

Fix: F-38640r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Protection From Zone Elevation -> "Internet Explorer Processes" to "Enabled".

b
Internet Explorer Processes for Restrict File Download must be enforced (Reserved).
Medium - V-15556 - SV-45236r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI630
Vuln IDs
  • V-15556
Rule IDs
  • SV-45236r1_rule
In certain circumstances, websites can initiate file download prompts without interaction from users. This technique can allow websites to put unauthorized files on users' hard drives if they click the wrong button and accept the download. If you configure the Restrict File Download\Internet Explorer Processes policy setting to Enabled, file download prompts that are not user-initiated are blocked for Internet Explorer processes. If you configure this policy setting as Disabled, prompting will occur for file downloads that are not user-initiated for Internet Explorer processes. Note: This setting is configured as Enabled in all environments specified in this guide to help prevent attackers from placing arbitrary code on users' computers.System Administrator
Checks: C-42584r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Restrict File Download -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_RESTRICT_FILEDOWNLOAD Criteria: If the value (Reserved) is REG_SZ = 1, this is not a finding.

Fix: F-38632r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Restrict File Download -> "Internet Explorer Processes" to "Enabled".

b
Internet Explorer Processes for Restrict File Download must be enforced (Explorer).
Medium - V-15557 - SV-45234r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI635
Vuln IDs
  • V-15557
Rule IDs
  • SV-45234r1_rule
In certain circumstances, websites can initiate file download prompts without interaction from users. This technique can allow websites to put unauthorized files on users' hard drives if they click the wrong button and accept the download. If you configure the Restrict File Download\Internet Explorer Processes policy setting to Enabled, file download prompts that are not user-initiated are blocked for Internet Explorer processes. If you configure this policy setting as Disabled, prompting will occur for file downloads that are not user-initiated for Internet Explorer processes. Note: This setting is configured as Enabled in all environments specified in this guide to help prevent attackers from placing arbitrary code on users' computers.System Administrator
Checks: C-42582r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Restrict File Download -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_RESTRICT_FILEDOWNLOAD Criteria: If the value explorer.exe is REG_SZ = 1, this is not a finding.

Fix: F-38630r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Restrict File Download -> "Internet Explorer Processes" to "Enabled".

b
Internet Explorer Processes for Restrict File Download must be enforced (IExplore).
Medium - V-15558 - SV-45235r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI640
Vuln IDs
  • V-15558
Rule IDs
  • SV-45235r1_rule
In certain circumstances, websites can initiate file download prompts without interaction from users. This technique can allow websites to put unauthorized files on users' hard drives if they click the wrong button and accept the download. If you configure the Restrict File Download\Internet Explorer Processes policy setting to Enabled, file download prompts that are not user-initiated are blocked for Internet Explorer processes. If you configure this policy setting as Disabled, prompting will occur for file downloads that are not user-initiated for Internet Explorer processes. Note: This setting is configured as Enabled in all environments specified in this guide to help prevent attackers from placing arbitrary code on users' computers.System Administrator
Checks: C-42583r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Restrict File Download -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_RESTRICT_FILEDOWNLOAD Criteria: If the value iexplore.exe is REG_SZ = 1, this is not a finding.

Fix: F-38631r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Restrict File Download -> "Internet Explorer Processes" to "Enabled".

b
Internet Explorer Processes for restricting pop-up windows must be enforced (Reserved).
Medium - V-15559 - SV-45241r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI645
Vuln IDs
  • V-15559
Rule IDs
  • SV-45241r1_rule
Internet Explorer allows scripts to programmatically open, resize, and reposition various types of windows. Often, disreputable websites will resize windows to either hide other windows or force the user to interact with a window containing malicious code. The Scripted Window Security Restrictions security feature restricts pop-up windows and prohibits scripts from displaying windows in which the title and status bars are not visible to the user, or which hide other windows' title and status bars. If you enable the Scripted Window Security Restrictions\Internet Explorer Processes policy setting, pop-up windows and other restrictions apply for Windows Explorer and Internet Explorer processes. If you disable or do not configure this policy setting, scripts can continue to create pop-up windows, and windows that hide other windows. Recommend configuring this setting to Enabled to help prevent malicious websites from controlling the Internet Explorer windows or fooling users into clicking on the wrong window.System Administrator
Checks: C-42590r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Scripted Window Security Restrictions -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_WINDOW_RESTRICTIONS Criteria: If the value (Reserved) is REG_SZ = 1, this is not a finding.

Fix: F-38637r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Scripted Window Security Restrictions -> "Internet Explorer Processes" to "Enabled".

b
.NET Framework-reliant components not signed with Authenticode must be disallowed to run (Restricted Sites Zone).
Medium - V-15560 - SV-45049r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI650
Vuln IDs
  • V-15560
Rule IDs
  • SV-45049r1_rule
This policy setting allows you to manage whether .NET Framework reliant components that are not signed with Authenticode can be executed from Internet Explorer. These components include managed controls referenced from an object tag and managed executables referenced from a link. If you enable this policy setting, Internet Explorer will execute unsigned managed components. If you select Prompt in the drop-down box, Internet Explorer will prompt the user to determine whether to execute unsigned managed components. If you disable this policy setting, Internet Explorer will not execute unsigned managed components. If you do not configure this policy setting, Internet Explorer will execute unsigned managed components.System Administrator
Checks: C-42427r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Run .NET Framework-reliant components not signed with Authenticode" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 2004 is REG_DWORD = 3, this is not a finding.

Fix: F-38461r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Run .NET Framework-reliant components not signed with Authenticode" to "Enabled", and select "Disable" from the drop-down box.

b
.NET Framework-reliant components signed with Authenticode must be disallowed to run (Restricted Sites Zone).
Medium - V-15561 - SV-45054r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI655
Vuln IDs
  • V-15561
Rule IDs
  • SV-45054r1_rule
This policy setting allows you to manage whether .NET Framework reliant components that are signed with Authenticode can be executed from Internet Explorer. It may be possible for malicious content hosted on a website to take advantage of these components. These components include managed controls referenced from an object tag and managed executables referenced from a link. If you enable this policy setting, Internet Explorer will execute signed managed components. If you select Prompt in the drop-down box, Internet Explorer will prompt the user to determine whether to execute signed managed components. If you disable this policy setting, Internet Explorer will not execute signed managed components. If you do not configure this policy setting, Internet Explorer will execute signed managed components.System Administrator
Checks: C-42430r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Run .NET Framework-reliant components signed with Authenticode" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 2001 is REG_DWORD = 3, this is not a finding.

Fix: F-38464r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Run .NET Framework-reliant components signed with Authenticode" to "Enabled", and select "Disable" from the drop-down box.

b
Scripting of Java applets must be disallowed (Restricted Sites zone).
Medium - V-15562 - SV-45294r2_rule
RMF Control
Severity
Medium
CCI
Version
DTBI670
Vuln IDs
  • V-15562
Rule IDs
  • SV-45294r2_rule
This policy setting allows you to manage whether applets are exposed to scripts within the zone. If you enable this policy setting, scripts can access applets automatically without user intervention. If you select Prompt in the drop-down box, users are queried to choose whether to allow scripts to access applets. If you disable this policy setting, scripts are prevented from accessing applets. If you do not configure this policy setting, scripts can access applets automatically without user intervention.System Administrator
Checks: C-42642r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Scripting of Java applets" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1402 is REG_DWORD = 3, this is not a finding.

Fix: F-38690r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Scripting of Java applets" to "Enabled", and select "Disable" from the drop-down box.

b
The URL to be displayed for checking updates to Internet Explorer and Internet Tools must be a blank page.
Medium - V-15563 - SV-45439r2_rule
RMF Control
Severity
Medium
CCI
Version
DTBI675
Vuln IDs
  • V-15563
Rule IDs
  • SV-45439r2_rule
This policy setting allows checking for updates for Internet Explorer from the specified URL, included by default in Internet Explorer. If you enable this policy setting, users will not be able to change the URL to be displayed for checking updates to Internet Explorer and Internet Tools. The URL must be specified to be displayed for checking updates to Internet Explorer and Internet Tools. If you disable or do not configure this policy setting, users will be able to change the URL to be displayed for checking updates to Internet Explorer and Internet Tools. System Administrator
Checks: C-42788r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Settings -> Component Updates -> Periodic check for updates to Internet Explorer and Internet Tools -> "Prevent changing the URL for checking updates to Internet Explorer and Internet Tools" must be "Enabled" with a "blank or empty" selection box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main Criteria: The Update_Check_Page value must exist. The value must contain no data value. If the value Update_Check_Page is not present, this is a finding.

Fix: F-38836r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Settings -> Component Updates -> Periodic check for updates to Internet Explorer and Internet Tools -> "Prevent changing the URL for checking updates to Internet Explorer and Internet Tools" to "Enabled" with a "blank or empty" selection box.

b
The update check interval must be configured and set to 30 days.
Medium - V-15564 - SV-45435r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI680
Vuln IDs
  • V-15564
Rule IDs
  • SV-45435r1_rule
Although Microsoft thoroughly tests all patches and service packs before they are published, organizations should carefully control all of the software that is installed on their managed computers. This setting specifies the update check interval, automatic installation, and the default interval value, which is 30 days. If you enable this policy setting, the user will not be able to configure the update check interval, and computers will not automatically download and install updates for Internet Explorer. The update check interval must be specified. If you disable or do not configure this policy setting, the user will have the freedom to configure the update check interval.System Administrator
Checks: C-42784r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Settings -> Component Updates -> Periodic check for updates to Internet Explorer and Internet Tools -> "Prevent specifying the update check interval (in days)" must be "Enabled", and "30" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main Criteria: If the value Update_Check_Interval is REG_DWORD = 30 (Decimal), this is not a finding.

Fix: F-38832r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Settings -> Component Updates -> Periodic check for updates to Internet Explorer and Internet Tools -> "Prevent specifying the update check interval (in days)" to "Enabled", and select "30" from the drop-down box.

b
Internet Explorer Processes for MIME handling must be enforced (Explorer).
Medium - V-15565 - SV-45222r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI592
Vuln IDs
  • V-15565
Rule IDs
  • SV-45222r1_rule
Internet Explorer uses Multipurpose Internet Mail Extensions (MIME) data to determine file handling procedures for files received through a web server. The Consistent MIME Handling\Internet Explorer Processes policy setting determines whether Internet Explorer requires all file-type information provided by web servers to be consistent. For example, if the MIME type of a file is text/plain but the MIME data indicates the file is really an executable file, Internet Explorer changes its extension to reflect this executable status. This capability helps ensure executable code cannot masquerade as other types of data that may be trusted. If you enable this policy setting, Internet Explorer examines all received files and enforces consistent MIME data for them. If you disable or do not configure this policy setting, Internet Explorer does not require consistent MIME data for all received files and will use the MIME data provided by the file. MIME file-type spoofing is a potential threat to the organization. Ensuring these files are consistent and properly labeled helps prevent malicious file downloads from infecting the network. This guide recommends configuring this policy as Enabled for all environments specified in this guide.System Administrator
Checks: C-42570r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Consistent Mime Handling -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_MIME_HANDLING Criteria: If the value explorer.exe is REG_SZ = 1, this is not a finding.

Fix: F-38618r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Consistent Mime Handling -> "Internet Explorer Processes" to "Enabled".

b
Internet Explorer Processes for MIME handling must be enforced (IExplore).
Medium - V-15566 - SV-45223r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI594
Vuln IDs
  • V-15566
Rule IDs
  • SV-45223r1_rule
Internet Explorer uses Multipurpose Internet Mail Extensions (MIME) data to determine file handling procedures for files received through a web server. The Consistent MIME Handling\Internet Explorer Processes policy setting determines whether Internet Explorer requires all file-type information provided by web servers to be consistent. For example, if the MIME type of a file is text/plain but the MIME data indicates that the file is really an executable file, Internet Explorer changes its extension to reflect this executable status. This capability helps ensure that executable code cannot masquerade as other types of data that may be trusted. If you enable this policy setting, Internet Explorer examines all received files and enforces consistent MIME data for them. If you disable or do not configure this policy setting, Internet Explorer does not require consistent MIME data for all received files and will use the MIME data provided by the file. MIME file-type spoofing is a potential threat to an organization. Ensuring these files are consistent and properly labeled helps prevent malicious file downloads from infecting the network. This guide recommends configuring this policy as Enabled for all environments specified in this guide.System Administrator
Checks: C-42571r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Consistent Mime Handling -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_MIME_HANDLING Criteria: If the value iexplore.exe is REG_SZ = 1, this is not a finding.

Fix: F-38619r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Consistent Mime Handling -> "Internet Explorer Processes" to "Enabled".

b
Internet Explorer Processes for MK protocol must be enforced (Reserved).
Medium - V-15568 - SV-45230r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI599
Vuln IDs
  • V-15568
Rule IDs
  • SV-45230r1_rule
The MK Protocol Security Restriction policy setting reduces attack surface area by blocking the seldom used MK protocol. Some older web applications use the MK protocol to retrieve information from compressed files. Because the MK protocol is not widely used, it should be blocked wherever it is not needed. Setting this policy to Enabled; blocks the MK protocol for Windows Explorer and Internet Explorer, which causes resources that use the MK protocol to fail. Disabling this setting allows applications to use the MK protocol API. This guide recommends configuring this setting to Enabled to block the MK protocol unless it is specifically needed in the environment. Note: Because resources that use the MK protocol will fail when deploying this setting, ensure none of the applications use the MK protocol.System Administrator
Checks: C-42578r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> MK Protocol Security Restriction -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_DISABLE_MK_PROTOCOL Criteria: If the value (Reserved) is REG_SZ = 1, this is not a finding.

Fix: F-38626r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> MK Protocol Security Restriction -> "Internet Explorer Processes" to "Enabled".

b
Internet Explorer Processes for Zone Elevation must be enforced (Explorer).
Medium - V-15569 - SV-45242r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI612
Vuln IDs
  • V-15569
Rule IDs
  • SV-45242r1_rule
Internet Explorer places restrictions on each web page it opens that are dependent upon the location of the web page (such as Internet Zone, Intranet Zone, or Local Machine Zone). Web pages on a local computer have the fewest security restrictions and reside in the Local Machine Zone, which makes the Local Machine Security Zone a prime target for malicious attackers. If you enable this policy setting, any zone can be protected from zone elevation by Internet Explorer processes. This approach stops content running in one zone from gaining the elevated privileges of another zone. If you disable this policy setting, no zone receives such protection from Internet Explorer processes. Because of the severity and relative frequency of zone elevation attacks, this guide recommends configuring this setting as Enabled in all environments.System Administrator
Checks: C-42591r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Protection From Zone Elevation -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ZONE_ELEVATION Criteria: If the value explorer.exe is REG_SZ = 1, this is not a finding.

Fix: F-38638r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Protection From Zone Elevation -> "Internet Explorer Processes" to "Enabled".

b
Internet Explorer Processes for Zone Elevation must be enforced (IExplore).
Medium - V-15570 - SV-45243r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI614
Vuln IDs
  • V-15570
Rule IDs
  • SV-45243r1_rule
Internet Explorer places restrictions on each web page it opens that are dependent upon the location of the web page (such as Internet Zone, Intranet Zone, or Local Machine Zone). Web pages on a local computer have the fewest security restrictions and reside in the Local Machine Zone, which makes the Local Machine Security Zone a prime target for malicious attackers. If you enable this policy setting, any zone can be protected from zone elevation by Internet Explorer processes. This approach stops content running in one zone from gaining the elevated privileges of another zone. If you disable this policy setting, no zone receives such protection from Internet Explorer processes. Because of the severity and relative frequency of zone elevation attacks, this guide recommends that you configure this setting as Enabled in all environments.System Administrator
Checks: C-42592r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Protection From Zone Elevation -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ZONE_ELEVATION Criteria: If the value iexplore.exe is REG_SZ = 1, this is not a finding.

Fix: F-38639r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Protection From Zone Elevation -> "Internet Explorer Processes" to "Enabled".

b
Internet Explorer Processes for restricting pop-up windows must be enforced (Explorer).
Medium - V-15571 - SV-45237r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI647
Vuln IDs
  • V-15571
Rule IDs
  • SV-45237r1_rule
Internet Explorer allows scripts to programmatically open, resize, and reposition various types of windows. Often, disreputable websites will resize windows to either hide other windows or force a user to interact with a window that contains malicious code. The Scripted Window Security Restrictions security feature restricts pop-up windows and prohibits scripts from displaying windows in which the title and status bars are not visible to the user, or which hide other windows' title and status bars. If you enable the Scripted Window Security Restrictions\Internet Explorer Processes policy setting, pop-up windows and other restrictions apply for Windows Explorer and Internet Explorer processes. If you disable or do not configure this policy setting, scripts can continue to create pop-up windows and windows that hide other windows. This guide recommends configuring this setting to Enabled to help prevent malicious websites from controlling the Internet Explorer windows or fooling users into clicking on the wrong window.System Administrator
Checks: C-42585r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Scripted Window Security Restrictions -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_WINDOW_RESTRICTIONS Criteria: If the value explorer.exe is REG_SZ = 1, this is not a finding.

Fix: F-38633r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Scripted Window Security Restrictions -> "Internet Explorer Processes" to "Enabled".

b
Internet Explorer Processes for restricting pop-up windows must be enforced (IExplore).
Medium - V-15572 - SV-45240r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI649
Vuln IDs
  • V-15572
Rule IDs
  • SV-45240r1_rule
Internet Explorer allows scripts to programmatically open, resize, and reposition various types of windows. Often, disreputable websites will resize windows to either hide other windows or force a user to interact with a window that contains malicious code. The Scripted Window Security Restrictions security feature restricts pop-up windows and prohibits scripts from displaying windows in which the title and status bars are not visible to the user, or which hide other windows' title and status bars. If you enable the Scripted Window Security Restrictions\Internet Explorer Processes policy setting, pop-up windows and other restrictions apply for Windows Explorer and Internet Explorer processes. If you disable or do not configure this policy setting, scripts can continue to create pop-up windows and windows that hide other windows. This guide recommends configuring this setting to Enabled to help prevent malicious websites from controlling the Internet Explorer windows or fooling users into clicking on the wrong window.System Administrator
Checks: C-42589r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Scripted Window Security Restrictions -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_WINDOW_RESTRICTIONS Criteria: If the value iexplore.exe is REG_SZ = 1, this is not a finding.

Fix: F-38636r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Scripted Window Security Restrictions -> "Internet Explorer Processes" to "Enabled".

b
AutoComplete feature for forms must be disallowed.
Medium - V-15574 - SV-45099r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI690
Vuln IDs
  • V-15574
Rule IDs
  • SV-45099r1_rule
This AutoComplete feature suggests possible matches when users are filling in forms. It is possible that this feature will cache sensitive data and store it in the user's profile, where it might not be protected as rigorously as required by organizational policy. If you enable this setting, the user is not presented with suggested matches when filling in forms. If you disable this setting, the user is presented with suggested possible matches when filling forms. If you do not configure this setting, the user has the freedom to turn on the auto-complete feature for forms. To display this option, the user opens the Internet Options dialog box, clicks the Contents Tab, and clicks the Settings button. System Administrator
Checks: C-42457r1_chk

The policy value for User Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Disable AutoComplete for forms" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKCU\Software\Policies\Microsoft\Internet Explorer\Main Criteria: If the value Use FormSuggest is REG_SZ = no, this is not a finding.

Fix: F-38499r1_fix

Set the policy value for User Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Disable AutoComplete for forms" to "Enabled".

b
Crash Detection management must be enforced.
Medium - V-15579 - SV-45130r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI715
Vuln IDs
  • V-15579
Rule IDs
  • SV-45130r1_rule
The "Turn off Crash Detection" policy setting allows you to manage the crash detection feature of add-on management in Internet Explorer. A crash report could contain sensitive information from the computer's memory. If you enable this policy setting, a crash in Internet Explorer will be similar to one on a computer running Windows XP Professional Service Pack 1 and earlier, where Windows Error Reporting will be invoked. If you disable this policy setting, the crash detection feature in add-on management will be functional. System Administrator
Checks: C-42476r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Turn off Crash Detection" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key:HKLM\Software\Policies\Microsoft\Internet Explorer\Restrictions Criteria: If the value NoCrashDetection is REG_DWORD = 1, this is not a finding.

Fix: F-38526r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Turn off Crash Detection" to "Enabled".

b
Turn on the auto-complete feature for user names and passwords on forms are not disabled.
Medium - V-15581 - SV-45101r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI725
Vuln IDs
  • V-15581
Rule IDs
  • SV-45101r1_rule
This policy setting controls automatic completion of fields in forms on web pages. It is possible that malware could be developed which would be able to extract the cached user names and passwords from the currently logged on user, which an attacker could then use to compromise that user's online accounts. If you enable this setting, the user cannot change "User name and passwords on forms" or "prompt me to save passwords". The Auto Complete feature for user names and passwords on forms will be turned on. If you disable this setting, the user cannot change "User name and passwords on forms" or "prompt me to save passwords". The Auto Complete feature for user names and passwords on forms is turned off. The user also cannot opt to be prompted to save passwords. If you do not configure this setting, the user has the freedom of turning on Auto Complete for user name and passwords on forms, and the option of prompting to save passwords.System Administrator
Checks: C-42458r1_chk

The policy value for User Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Turn on the auto-complete feature for user names and passwords on forms" must be "Disabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKCU\Software\Policies\Microsoft\Internet Explorer\Main Criteria: If the value FormSuggest Passwords is REG_SZ = no, this is not a finding. AND Procedure: Use the Windows Registry Editor to navigate to the following key: HKCU\Software\Policies\Microsoft\Internet Explorer\Main Criteria: If the value FormSuggest PW Ask is REG_SZ = no, this is not a finding.

Fix: F-38500r1_fix

Set the policy value for User Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Turn on the auto-complete feature for user names and passwords on forms" to "Disabled".

b
Internet Explorer Processes for MIME sniffing must be enforced (Explorer).
Medium - V-15603 - SV-45225r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI596
Vuln IDs
  • V-15603
Rule IDs
  • SV-45225r1_rule
MIME sniffing is the process of examining the content of a MIME file to determine its context - whether it is a data file, an executable file, or some other type of file. This policy setting determines whether Internet Explorer MIME sniffing will prevent promotion of a file of one type to a more dangerous file type. When set to Enabled, MIME sniffing will never promote a file of one type to a more dangerous file type. Disabling MIME sniffing configures Internet Explorer processes to allow a MIME sniff that promotes a file of one type to a more dangerous file type. For example, promoting a text file to an executable file is a dangerous promotion because any code in the supposed text file would be executed. MIME file-type spoofing is a potential threat to an organization. Ensuring these files are consistently handled helps prevent malicious file downloads from infecting the network. This guide recommends configuring this policy as Enabled for all environments specified in this guide. Note: This setting works in conjunction with, but does not replace, the Consistent MIME Handling settings.System Administrator
Checks: C-42573r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Mime Sniffing Safety Feature -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_MIME_SNIFFING Criteria: If the value explorer.exe is REG_SZ = 1, this is not a finding.

Fix: F-38621r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Mime Sniffing Safety Feature -> "Internet Explorer Processes" to "Enabled".

b
Internet Explorer Processes for MIME sniffing must be enforced (IExplore).
Medium - V-15604 - SV-45226r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI597
Vuln IDs
  • V-15604
Rule IDs
  • SV-45226r1_rule
MIME sniffing is the process of examining the content of a MIME file to determine its context - whether it is a data file, an executable file, or some other type of file. This policy setting determines whether Internet Explorer MIME sniffing will prevent promotion of a file of one type to a more dangerous file type. When set to Enabled, MIME sniffing will never promote a file of one type to a more dangerous file type. Disabling MIME sniffing configures Internet Explorer processes to allow a MIME sniff that promotes a file of one type to a more dangerous file type. For example, promoting a text file to an executable file is a dangerous promotion because any code in the supposed text file would be executed. MIME file-type spoofing is a potential threat to an organization. Ensuring these files are consistently handled helps prevent malicious file downloads from infecting the network. This guide recommends configuring this policy as Enabled for all environments specified in this guide. Note: This setting works in conjunction with, but does not replace, the Consistent MIME Handling settings.System Administrator
Checks: C-42574r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Mime Sniffing Safety Feature -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_MIME_SNIFFING Criteria: If the value iexplore.exe is REG_SZ = 1, this is not a finding.

Fix: F-38622r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Mime Sniffing Safety Feature -> "Internet Explorer Processes" to "Enabled".

b
First Run Wizard settings must be established for a home page.
Medium - V-17296 - SV-45152r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI010
Vuln IDs
  • V-17296
Rule IDs
  • SV-45152r1_rule
This policy setting prevents Internet Explorer from running the First Run Wizard the first time a user starts the browser after installing Internet Explorer or Windows. If this policy setting is enabled, IE is configurable in two ways: 1) Skip the First Run Wizard, and go directly to the user's home page, or 2) Skip the First Run Wizard, and go directly to the "Welcome to Internet Explorer" web page. If this policy setting is disabled or not configured, Internet Explorer may run the First Run Wizard the first time the browser is started after installation and provide users the ability to configure IE outside of environment policy. Starting with Windows 8, the "Welcome to Internet Explorer" web page is not available. The user's home page will display regardless of which option is chosen.System AdministratorInformation Assurance Officer
Checks: C-42495r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Prevent running First Run Wizard" must be "Enabled", and "Go directly to home page" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main Criteria: If the value DisableFirstRunCustomize is REG_DWORD = 1, this is not a finding.

Fix: F-38548r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Prevent running First Run Wizard" to "Enabled", and select "Go directly to home page" from the drop-down box.

b
Configuring History setting must be set to 40 days.
Medium - V-21887 - SV-45128r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI300
Vuln IDs
  • V-21887
Rule IDs
  • SV-45128r1_rule
This setting specifies the number of days that Internet Explorer keeps track of the pages viewed in the History List. The delete Browsing History option can be accessed using Tools, Internet Options, General tab, and then click Settings under Browsing History. If you enable this policy setting, a user cannot set the number of days that Internet Explorer keeps track of the pages viewed in the History List. The number of days that Internet Explorer keeps track of the pages viewed in the History List must be specified. Users will not be able to delete browsing history. If you disable or do not configure this policy setting, a user can set the number of days that Internet Explorer tracks views of pages in the History List. Users can delete browsing history.System Administrator
Checks: C-42475r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Delete Browsing History -> "Disable Configuring History" must be "Enabled", and "40" entered in 'Days to keep pages in History'. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Control Panel Criteria: If the value History is REG_DWORD = 1, this is not a finding. AND Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Url History Criteria: If the value DaysToKeep is REG_DWORD = 40 (decimal), this is not a finding.

Fix: F-38525r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Delete Browsing History -> "Disable Configuring History" to "Enabled", and enter "40" in 'Days to keep pages in History'.

b
Managing SmartScreen Filter use must be enforced.
Medium - V-22108 - SV-45275r3_rule
RMF Control
Severity
Medium
CCI
Version
DTBI740
Vuln IDs
  • V-22108
Rule IDs
  • SV-45275r3_rule
This setting is important from a security perspective because Microsoft has extensive data illustrating the positive impact the SmartScreen filter has had on reducing the risk of malware infection via visiting malicious websites. This policy setting allows users to enable the SmartScreen Filter, which will warn if the website being visited is known for fraudulent attempts to gather personal information through "phishing" or is known to host malware. If you enable this setting the user will not be prompted to enable the SmartScreen Filter. It must be specified which mode the SmartScreen Filter uses: On or Off. If the feature is On, all website addresses not contained on the filters allow list, will be sent automatically to Microsoft without prompting the user. If this feature is set to Off, the feature will not run. If you disable or do not configure this policy setting, the user is prompted to decide whether to turn on SmartScreen Filter during the first-run experience.System Administrator
Checks: C-42622r4_chk

If the system is on SIPRnet, this is NA. The policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Internet Explorer >> "Prevent Managing SmartScreen Filter" must be "Enabled", and "On" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\PhishingFilter Criteria: If the value "EnabledV9" is "REG_DWORD = 1", this is not a finding.

Fix: F-38671r3_fix

Set the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Internet Explorer >> "Prevent Managing SmartScreen Filter" to "Enabled", and select "On" from the drop-down box.

a
Updates to website lists from Microsoft must be disallowed.
Low - V-22147 - SV-45449r1_rule
RMF Control
Severity
Low
CCI
Version
DTBI750
Vuln IDs
  • V-22147
Rule IDs
  • SV-45449r1_rule
This policy controls the website compatibility lists provided by Microsoft. If you enable this policy setting, the compatibility website lists provided by Microsoft will be used during browser navigation. If a user visits a site on the compatibility list provided by Microsoft, the page will automatically display in Compatibility view. If you disable this policy setting, the Microsoft website list will not be used. Additionally, users cannot enable the feature using the Compatibility View Settings dialog box. If you do not configure this setting, the Microsoft website list will not be active. The user can enable the functionality using the Compatibility View Settings dialog box.May adversely impact system.System Administrator
Checks: C-42798r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Compatibility View -> "Include updated Web site lists from Microsoft" must be "Disabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\BrowserEmulation Criteria: If the value MSCompatibilityMode is REG_DWORD = 0, this is not a finding.

Fix: F-38846r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Compatibility View -> "Include updated Web site lists from Microsoft" to "Disabled".

b
Browser must retain history on exit.
Medium - V-22148 - SV-45115r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI760
Vuln IDs
  • V-22148
Rule IDs
  • SV-45115r1_rule
Delete Browsing History on exit automatically deletes specified items when the last browser window closes. Disabling this function will prevent users from deleting their browsing history, which could be used to identify malicious Web sites and files that could later be used for anti-virus and intrusion detection system (IDS) signatures. Furthermore, preventing users from deleting browsing history could be used to identify abusive web surfing on government systems.System Administrator
Checks: C-42470r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Delete Browsing History -> "Allow deleting browsing history on exit" must be "Disabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Privacy Criteria: If the value ClearBrowsingHistoryOnExit is REG_DWORD = 0, this is not a finding.

Fix: F-38511r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Delete Browsing History -> "Allow deleting browsing history on exit" to "Disabled".

b
Deleting websites that the user has visited must be disallowed.
Medium - V-22149 - SV-45137r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI770
Vuln IDs
  • V-22149
Rule IDs
  • SV-45137r1_rule
This policy prevents users from deleting the history of websites the user has visited. If you enable this policy setting, websites the user has visited will be preserved when the user clicks Delete. If you disable this policy setting, websites that the user has visited will be deleted when the user clicks Delete. If you do not configure this policy setting, the user will be able to select whether to delete or preserve websites the user visited when the user clicks Delete.System Administrator
Checks: C-42481r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Delete Browsing History -> "Prevent Deleting Web sites that the User has Visited" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Privacy Criteria: If the value CleanHistory is REG_DWORD = 0, this is not a finding.

Fix: F-38534r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Delete Browsing History -> "Prevent Deleting Web sites that the User has Visited" to "Enabled".

b
InPrivate Browsing must be disallowed.
Medium - V-22150 - SV-45214r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI780
Vuln IDs
  • V-22150
Rule IDs
  • SV-45214r1_rule
InPrivate Browsing lets the user control whether or not Internet Explorer saves the browsing history, cookies, and other data. User control of settings is not the preferred control method. The InPrivate Browsing feature in Internet Explorer makes browser privacy easy by not storing history, cookies, temporary Internet files, or other data. If you enable this policy setting, InPrivate Browsing will be disabled. If you disable this policy setting, InPrivate Browsing will be available for use. If you do not configure this setting, InPrivate Browsing can be turned on or off through the registry.System Administrator
Checks: C-42562r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Privacy -> "Turn off InPrivate Browsing" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Privacy Criteria: If the value EnableInPrivateBrowsing is REG_DWORD = 0, this is not a finding.

Fix: F-38610r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Privacy -> "Turn off InPrivate Browsing" to "Enabled".

b
Scripting of Internet Explorer WebBrowser control property must be disallowed (Internet zone).
Medium - V-22152 - SV-45293r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI800
Vuln IDs
  • V-22152
Rule IDs
  • SV-45293r1_rule
This policy setting controls whether a page may control embedded WebBrowser control via script. Scripted code hosted on sites located in this zone is more likely to contain malicious code. If you enable this policy setting, script access to the WebBrowser control is allowed. If you disable this policy setting, script access to the WebBrowser control is not allowed. If you do not configure this policy setting, script access to the WebBrowser control can be enabled or disabled by the user. By default, script access to the WebBrowser control is only allowed in the Local Machine and Intranet Zones.System Administrator
Checks: C-42641r4_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Allow scripting of Internet Explorer WebBrowser controls" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 1206 is REG_DWORD = 3, this is not a finding.

Fix: F-38689r3_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Allow scripting of Internet Explorer WebBrowser controls" to "Enabled", and select "Disable" from the drop-down box.

b
When uploading files to a server, the local directory path must be excluded (Internet zone).
Medium - V-22153 - SV-45490r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI810
Vuln IDs
  • V-22153
Rule IDs
  • SV-45490r1_rule
This policy setting controls whether or not the local path information will be sent when uploading a file via a HTML form. If the local path information is sent, some information may be unintentionally revealed to the server. If you do not configure this policy setting, the user can choose whether path information will be sent when uploading a file via a form. By default, path information will be sent.System Administrator
Checks: C-42839r2_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Include local path when user is uploading files to a server" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 160A is REG_DWORD = 3, this is not a finding.

Fix: F-38887r2_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Include local path when user is uploading files to a server" to "Enabled", and select "Disable" from the drop-down box.

b
Security Warning for unsafe files must be set to prompt (Internet zone).
Medium - V-22154 - SV-45306r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI820
Vuln IDs
  • V-22154
Rule IDs
  • SV-45306r1_rule
This policy setting controls whether or not the "Open File - Security Warning" message appears when the user tries to open executable files or other potentially unsafe files (from an intranet file shared by using Windows Explorer, for example). If you enable this policy setting and set the drop-down box to Enable, these files open without a security warning. If you set the drop-down box to Prompt, a security warning appears before the files open. If you disable this policy these files do not open. If you do not configure this policy setting, the user can configure how the computer handles these files.System Administrator
Checks: C-42654r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Show security warning for potentially unsafe files" must be "Enabled", and "Prompt" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 1806 is REG_DWORD = 1, this is not a finding.

Fix: F-38702r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Show security warning for potentially unsafe files" to "Enabled", and select "Prompt" from the drop-down box.

b
ActiveX controls without prompt property must be used in approved domains only (Internet zone).
Medium - V-22155 - SV-45075r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI830
Vuln IDs
  • V-22155
Rule IDs
  • SV-45075r1_rule
This policy setting controls whether or not the user is prompted to allow ActiveX controls to run on websites other than the website that installed the ActiveX control. If the user were to disable the setting for the zone, malicious ActiveX controls could be executed without the user's knowledge. Disabling this setting would allow the possibility for malicious ActiveX controls to be executed from non-approved domains within this zone without the user's knowledge. Enabling this setting enforces the default value and prohibits the user from changing the value. Websites should be moved into another zone if permissions need to be changed.System Administrator
Checks: C-42447r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> " Allow only approved domains to use ActiveX controls without prompt" must be "Enabled", and "Enable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 120b is REG_DWORD = 3, this is not a finding.

Fix: F-38482r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Allow only approved domains to use ActiveX controls without prompt" to "Enabled", and select "Enable" from the drop-down box.

b
Cross-Site Scripting (XSS) Filter must be enforced (Internet zone).
Medium - V-22156 - SV-45131r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI840
Vuln IDs
  • V-22156
Rule IDs
  • SV-45131r1_rule
The Cross-Site Scripting (XSS) Filter is designed to prevent users from becoming victims of unintentional information disclosure. This setting controls if the Cross-Site Scripting (XSS) Filter detects and prevents cross-site script injection into websites in this zone. If you enable this policy setting, the XSS Filter will be enabled for sites in this zone, and the XSS Filter will attempt to block cross-site script injections. If you disable this policy setting, the XSS Filter will be disabled for sites in this zone, and Internet Explorer will permit cross-site script injections.System Administrator
Checks: C-42477r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Turn on Cross-Site Scripting (XSS) Filter" must be "Enabled", and "Enable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 1409 is REG_DWORD = 0, this is not a finding.

Fix: F-38528r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone -> "Turn on Cross-Site Scripting (XSS) Filter" to "Enabled", and select "Enable" from the drop-down box.

b
Scripting of Internet Explorer WebBrowser control must be disallowed (Restricted Sites zone).
Medium - V-22157 - SV-45291r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI850
Vuln IDs
  • V-22157
Rule IDs
  • SV-45291r1_rule
This policy setting controls whether a page may control embedded WebBrowser control via script. Scripted code hosted on sites located in this zone is more likely to contain malicious code. If you enable this policy setting, script access to the WebBrowser control is allowed. If you disable this policy setting, script access to the WebBrowser control is not allowed. If you do not configure this policy setting, script access to the WebBrowser control can be enabled or disabled by the user. By default, script access to the WebBrowser control is only allowed in the Local Machine and Intranet Zones.System Administrator
Checks: C-42639r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow scripting of Internet Explorer WebBrowser controls" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1206 is REG_DWORD = 3, this is not a finding.

Fix: F-38687r2_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow scripting of Internet Explorer WebBrowser controls" to "Enabled", and select "Disable" from the drop-down box.

b
When uploading files to a server, the local directory path must be excluded (Restricted Sites zone).
Medium - V-22158 - SV-45491r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI860
Vuln IDs
  • V-22158
Rule IDs
  • SV-45491r1_rule
This policy setting controls whether or not the local path information will be sent when uploading a file via a HTML form. If the local path information is sent, some information may be unintentionally revealed to the server. If you do not configure this policy setting, the user can choose whether path information will be sent when uploading a file via a form. By default, path information will be sent. System Administrator
Checks: C-42840r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Include local path when user is uploading files to a server" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 160A is REG_DWORD = 3, this is not a finding.

Fix: F-38889r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Include local path when user is uploading files to a server" to "Enabled", and select "Disable" from the drop-down box.

b
Security Warning for unsafe files must be disallowed (Restricted Sites zone).
Medium - V-22159 - SV-45309r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI870
Vuln IDs
  • V-22159
Rule IDs
  • SV-45309r1_rule
This policy setting controls whether or not the "Open File - Security Warning" message appears when the user tries to open executable files or other potentially unsafe files (from an intranet file shared by using Windows Explorer, for example). If you enable this policy setting and set the drop-down box to Enable, these files open without a security warning. If you set the drop-down box to Prompt, a security warning appears before the files open. If you disable this policy these files do not open. If you do not configure this policy setting, the user can configure how the computer handles these files.System Administrator
Checks: C-42658r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Show security warning for potentially unsafe files" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1806 is REG_DWORD = 3, this is not a finding.

Fix: F-38706r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Show security warning for potentially unsafe files" to "Enabled", and select "Disable" from the drop-down box.

b
ActiveX controls without prompt property must be used in approved domains only (Restricted Sites zone).
Medium - V-22160 - SV-45076r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI880
Vuln IDs
  • V-22160
Rule IDs
  • SV-45076r1_rule
This policy setting controls whether or not the user is prompted to allow ActiveX controls to run on websites other than the website that installed the ActiveX control. If the user were to disable the setting for the zone, malicious ActiveX controls could be executed without the user's knowledge. Disabling this setting would allow the possibility for malicious ActiveX controls to be executed from non-approved domains within this zone without the user's knowledge. Enabling this setting enforces the default value and prohibits the user from changing the value. Websites should be moved into another zone if permissions need to be changed.System Administrator
Checks: C-42448r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow only approved domains to use ActiveX controls without prompt" must be "Enabled", and "Enable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 120b is REG_DWORD = 3, this is not a finding.

Fix: F-38483r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Allow only approved domains to use ActiveX controls without prompt" to "Enabled", and select "Enable" from the drop-down box.

b
Cross-Site Scripting (XSS) Filter property must be enforced (Restricted Sites zone).
Medium - V-22161 - SV-45133r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI890
Vuln IDs
  • V-22161
Rule IDs
  • SV-45133r1_rule
The Cross-Site Scripting (XSS) Filter is designed to prevent users from becoming victims of unintentional information disclosure. This setting controls if the Cross-Site Scripting (XSS) Filter detects and prevents cross-site script injection into websites in this zone. If you enable this policy setting, the XSS Filter will be enabled for sites in this zone, and the XSS Filter will attempt to block cross-site script injections. If you disable this policy setting, the XSS Filter will be disabled for sites in this zone, and Internet Explorer will permit cross-site script injections.System Administrator
Checks: C-42478r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Turn on Cross-Site Scripting (XSS) Filter" must be "Enabled", and "Enable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1409 is REG_DWORD = 0, this is not a finding.

Fix: F-38529r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone -> "Turn on Cross-Site Scripting (XSS) Filter" to "Enabled", and select "Enable" from the drop-down box.

b
Internet Explorer Processes Restrict ActiveX Install must be enforced (Reserved).
Medium - V-22171 - SV-45249r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI900
Vuln IDs
  • V-22171
Rule IDs
  • SV-45249r1_rule
Users often choose to install software such as ActiveX controls that are not permitted by their organization's security policy. Such software can pose significant security and privacy risks to networks. This policy setting enables blocking of ActiveX control installation prompts for Internet Explorer processes. If you enable this policy setting, prompts for ActiveX control installations will be blocked for Internet Explorer processes. If you disable this policy setting, prompts for ActiveX control installations will not be blocked and these prompts will be displayed to users. If you do not configure this policy setting, the user's preference will be used to determine whether to block ActiveX control installations for Internet Explorer processes.System Administrator
Checks: C-42596r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Restrict ActiveX Install -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_RESTRICT_ACTIVEXINSTALL Criteria: If the value (Reserved) is REG_SZ = 1, this is not a finding.

Fix: F-38645r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Restrict ActiveX Install -> "Internet Explorer Processes" to "Enabled".

b
Status bar updates via script must be disallowed (Internet zone).
Medium - V-22634 - SV-45314r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI910
Vuln IDs
  • V-22634
Rule IDs
  • SV-45314r1_rule
This policy setting allows you to manage whether script is allowed to update the status bar within the zone. A script running in the zone could cause false information to be displayed on the status bar, which could confuse the user and cause them to perform an undesirable action. If you enable this policy setting, script is allowed to update the status bar. If you disable this policy setting, script is not allowed to update the status bar. If you do not configure this policy setting, status bar updates via scripts will be disabled.System Administrator
Checks: C-42662r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone "Allow updates to status bar via script" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 2103 is REG_DWORD = 3, this is not a finding.

Fix: F-38710r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone "Allow updates to status bar via script" to "Enabled", and select "Disable" from the drop-down box.

b
.NET Framework-reliant components not signed with Authenticode must be disallowed to run (Internet zone).
Medium - V-22635 - SV-45047r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI920
Vuln IDs
  • V-22635
Rule IDs
  • SV-45047r1_rule
Unsigned components are more likely to contain malicious code and it is more difficult to determine the author of the application - therefore they should be avoided if possible. This policy setting allows you to manage whether .NET Framework components that are not signed with Authenticode can be executed from Internet Explorer. These components include managed controls referenced from an object tag and managed executables referenced from a link. If you enable this policy setting, Internet Explorer will execute unsigned managed components. If you select Prompt in the drop-down box, Internet Explorer will prompt the user to determine whether to execute unsigned managed components. If you disable this policy setting, Internet Explorer will not execute unsigned managed components. If you do not configure this policy setting, Internet Explorer will not execute unsigned managed components.System Administrator
Checks: C-42426r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone "Run .NET Framework-reliant components not signed with Authenticode" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 2004 is REG_DWORD = 3, this is not a finding.

Fix: F-38460r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone "Run .NET Framework-reliant components not signed with Authenticode" to "Enabled", and select "Disable" from the drop-down box.

b
.NET Framework-reliant components signed with Authenticode must be disallowed to run (Internet zone).
Medium - V-22636 - SV-45053r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI930
Vuln IDs
  • V-22636
Rule IDs
  • SV-45053r1_rule
It may be possible for someone to host malicious content on a website that takes advantage of these components. This policy setting allows you to manage whether .NET Framework components that are signed with Authenticode can be executed from Internet Explorer. These components include managed controls referenced from an object tag and managed executables referenced from a link. If you enable this policy setting, Internet Explorer will execute signed managed components. If you select Prompt in the drop-down box, Internet Explorer will prompt the user to determine whether to execute signed managed components. If you disable this policy setting, Internet Explorer will not execute signed managed components. If you do not configure this policy setting, Internet Explorer will not execute signed managed components.System Administrator
Checks: C-42429r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone "Run .NET Framework-reliant components signed with Authenticode" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 2001 is REG_DWORD = 3, this is not a finding.

Fix: F-38463r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Internet Zone "Run .NET Framework-reliant components signed with Authenticode" to "Enabled", and select "Disable" from the drop-down box.

b
Scriptlets must be disallowed (Restricted Sites zone).
Medium - V-22637 - SV-45301r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI940
Vuln IDs
  • V-22637
Rule IDs
  • SV-45301r1_rule
This policy setting allows you to manage whether scriptlets can be allowed. Scriptlets hosted on sites located in this zone are more likely to contain malicious code. If you enable this policy setting, users will be able to run scriptlets. If you disable this policy setting, users will not be able to run scriptlets. If you do not configure this policy setting, a scriptlet can be enabled or disabled by the user.System Administrator
Checks: C-42649r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone "Allow Scriptlets" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 1209 is REG_DWORD = 3, this is not a finding.

Fix: F-38697r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone "Allow Scriptlets" to "Enabled", and select "Disable" from the drop-down box.

b
Status bar updates via script must be disallowed (Restricted Sites zone).
Medium - V-22638 - SV-45318r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI950
Vuln IDs
  • V-22638
Rule IDs
  • SV-45318r1_rule
A script running in the zone could cause false information to be displayed on the status bar, which could confuse the user and cause an undesirable action. This policy setting allows you to manage whether script is allowed to update the status bar within the zone. If you enable this policy setting, script is allowed to update the status bar. If you disable this policy setting, script is not allowed to update the status bar. If you do not configure this policy setting, status bar updates via scripts will be disabled.System Administrator
Checks: C-42667r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone "Allow updates to status bar via script" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 2103 is REG_DWORD = 3, this is not a finding.

Fix: F-38714r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel -> Security Page -> Restricted Sites Zone "Allow updates to status bar via script" to "Enabled", and select "Disable" from the drop-down box.

b
Internet Explorer Processes Restrict ActiveX Install must be enforced (Explorer).
Medium - V-22687 - SV-45475r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI1010
Vuln IDs
  • V-22687
Rule IDs
  • SV-45475r1_rule
Users often choose to install software such as ActiveX controls that are not permitted by their organization's security policy. Such software can pose significant security and privacy risks to networks. This policy setting enables blocking of ActiveX control installation prompts for Internet Explorer processes. If you enable this policy setting, prompts for ActiveX control installations will be blocked for Internet Explorer processes. If you disable this policy setting, prompts for ActiveX control installations will not be blocked and these prompts will be displayed to users. If you do not configure this policy setting, the user's preference will be used to determine whether to block ActiveX control installations for Internet Explorer processes.System Administrator
Checks: C-42824r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Restrict ActiveX Install -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_RESTRICT_ACTIVEXINSTALL Criteria: If the value explorer.exe is REG_SZ = 1, this is not a finding.

Fix: F-38872r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Restrict ActiveX Install -> "Internet Explorer Processes" to "Enabled".

b
Internet Explorer Processes Restrict ActiveX Install must be enforced (IExplore).
Medium - V-22688 - SV-45473r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI1020
Vuln IDs
  • V-22688
Rule IDs
  • SV-45473r1_rule
Users often choose to install software such as ActiveX controls that are not permitted by their organization's security policy. Such software can pose significant security and privacy risks to networks. This policy setting enables blocking of ActiveX control installation prompts for Internet Explorer processes. If you enable this policy setting, prompts for ActiveX control installations will be blocked for Internet Explorer processes. If you disable this policy setting, prompts for ActiveX control installations will not be blocked and these prompts will be displayed to users. If you do not configure this policy setting, the user's preference will be used to determine whether to block ActiveX control installations for Internet Explorer processes.System Administrator
Checks: C-42822r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Restrict ActiveX Install -> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_RESTRICT_ACTIVEXINSTALL Criteria: If the value iexplore.exe is REG_SZ = 1, this is not a finding.

Fix: F-38870r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features -> Restrict ActiveX Install -> "Internet Explorer Processes" to "Enabled".

b
Add-on performance notifications must be disallowed.
Medium - V-30774 - SV-45078r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI745
Vuln IDs
  • V-30774
Rule IDs
  • SV-45078r1_rule
This policy setting prevents Internet Explorer from displaying a notification when the average time it takes to load all the user's enabled add-ons exceeds the threshold. The notification informs the user that add-ons are slowing their browsing and displays a button which opens the Disable Add-ons dialog box. The Disable Add-ons dialog box displays the load time for each group of add-ons enabled in the browser. It allows the user to disable add-ons and configure the threshold. If you enable this policy setting, users will not be notified when the average time it takes to load all the user's enabled add-ons exceeds the threshold.System Administrator
Checks: C-42450r2_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Turn off add-on performance notifications" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Windows\CurrentVersion\Policies\Ext Criteria: If the value DisableAddonLoadTimePerformanceNotifications is REG_DWORD = 1, this is not a finding.

Fix: F-38485r2_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Turn off add-on performance notifications" to "Enabled".

b
Browser Geolocation functionality must be disallowed.
Medium - V-30775 - SV-45112r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI755
Vuln IDs
  • V-30775
Rule IDs
  • SV-45112r1_rule
This setting has a small impact on user privacy because users may unknowingly allow their browser to share location data with web sites that they visit. The value of enabling this setting is diminished due to the fact that malicious web sites can learn a great deal about the location of a user merely by analyzing their IP address. If you enable this policy setting, browser geolocation support will be turned off. If you disable this policy setting, browser geolocation will be turned on. If you do not configure this setting, browser geolocation support can be turned on or off in Internet Options on the Privacy Tab.System Administrator
Checks: C-42467r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Turn off Browser Geolocation" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Geolocation Criteria: If the value PolicyDisableGeolocation is REG_DWORD = 1, this is not a finding.

Fix: F-38509r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Turn off Browser Geolocation" to "Enabled".

b
Suggested Sites functionality must be disallowed.
Medium - V-30776 - SV-45321r2_rule
RMF Control
Severity
Medium
CCI
Version
DTBI765
Vuln IDs
  • V-30776
Rule IDs
  • SV-45321r2_rule
This policy setting controls the Suggested Sites feature, which recommends sites based on the user's browsing activity. Suggested Sites reports a user's browsing history to Microsoft to store and monitor user page activity to suggest sites the user might want to visit. If you enable this policy setting, the user will not be prompted to enable the Suggested Sites and the user's browsing activities will be sent and stored online to produce suggestions. If you disable this policy setting, the entry points and functionality associated with this feature will be disabled.System Administrator
Checks: C-42669r2_chk

The policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Internet Explorer >> "Turn on Suggested Sites" must be "Disabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Suggested Sites Criteria: If the value "Enabled is REG_DWORD = 0", this is not a finding.

Fix: F-38717r2_fix

Set the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Internet Explorer >> "Turn on Suggested Sites" to "Disabled".

b
Automatic checking for Internet Explorer updates must be disallowed.
Medium - V-30777 - SV-45103r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI775
Vuln IDs
  • V-30777
Rule IDs
  • SV-45103r1_rule
This policy setting allows you to manage whether Internet Explorer checks the Internet for newer versions. When Internet Explorer is set to do this, the checks occur approximately every 30 days, and users are prompted to install new versions as they become available. If you enable this policy setting, Internet Explorer checks the Internet for a new version approximately every 30 days and prompts the user to download new versions when they are available. Newer versions might not comply with the Internet Explorer version requirements of the organization.System Administrator
Checks: C-42460r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel-> Advanced Page-> "Automatically check for Internet Explorer updates" must be "Disabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main Criteria: If the value NoUpdateCheck is REG_DWORD = 1, this is not a finding.

Fix: F-38502r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Internet Control Panel-> Advanced Page-> "Automatically check for Internet Explorer updates" to "Disabled".

b
ActiveX opt-in prompt must be disallowed.
Medium - V-30778 - SV-45077r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI805
Vuln IDs
  • V-30778
Rule IDs
  • SV-45077r1_rule
This policy setting allows you to turn off the ActiveX opt-in prompt. The ActiveX opt-in prevents Websites from loading any COM object without prior approval. If a page attempts to load a COM object that Internet Explorer has not used before, an information bar will appear asking the user for approval. If you enable this policy setting, the ActiveX opt-in prompt will not appear. Internet Explorer does not ask the user for permission to load a control, and will load the ActiveX if it passes all other internal security checks. If you disable or do not configure this policy setting the ActiveX opt-in prompt will appear.System Administrator
Checks: C-42449r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Turn off ActiveX opt-in prompt" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Microsoft\Windows\CurrentVersion\Policies\Ext Criteria: If the value NoFirsttimeprompt is REG_DWORD = 1, this is not a finding.

Fix: F-38484r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> "Turn off ActiveX opt-in prompt" to "Enabled".

b
Internet Explorer Processes for Notification Bars must be enforced (Reserved).
Medium - V-30779 - SV-45233r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI815
Vuln IDs
  • V-30779
Rule IDs
  • SV-45233r1_rule
This policy setting allows you to manage whether the Notification bar is displayed for Internet Explorer processes when file or code installs are restricted. By default, the Notification Bar is displayed for Internet Explorer processes. If you enable this policy setting, the Notification bar will be displayed for Internet Explorer processes. If you disable this policy setting, the Notification bar will not be displayed for Internet Explorer processes. If you do not configure this policy setting, the Notification bar will be displayed for Internet Explorer processes.System Administrator
Checks: C-42581r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features-> Notification Bar-> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_SECURITYBAND Criteria: If the value (Reserved) is REG_SZ = 1, this is not a finding.

Fix: F-38629r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features-> Notification Bar-> "Internet Explorer Processes" to "Enabled".

b
Internet Explorer Processes for Notification Bars must be enforced (Explorer).
Medium - V-30780 - SV-45231r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI825
Vuln IDs
  • V-30780
Rule IDs
  • SV-45231r1_rule
This policy setting allows you to manage whether the Notification bar is displayed for Internet Explorer processes when file or code installs are restricted. By default, the Notification bar is displayed for Internet Explorer processes. If you enable this policy setting, the Notification bar will be displayed for Internet Explorer processes. If you disable this policy setting, the Notification bar will not be displayed for Internet Explorer processes. If you do not configure this policy setting, the Notification bar will be displayed for Internet Explorer processes.System Administrator
Checks: C-42579r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features-> Notification Bar-> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_SECURITYBAND Criteria: If the value explorer.exe is REG_SZ = 1, this is not a finding.

Fix: F-38627r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features-> Notification Bar-> "Internet Explorer Processes" to "Enabled".

b
Internet Explorer Processes for Notification Bars must be enforced (IExplore).
Medium - V-30781 - SV-45232r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI835
Vuln IDs
  • V-30781
Rule IDs
  • SV-45232r1_rule
This policy setting allows you to manage whether the Notification bar is displayed for Internet Explorer processes when file or code installs are restricted. By default, the Notification bar is displayed for Internet Explorer processes. If you enable this policy setting, the Notification bar will be displayed for Internet Explorer processes. If you disable this policy setting, the Notification bar will not be displayed for Internet Explorer processes. If you do not configure this policy setting, the Notification bar will be displayed for Internet Explorer processes.System Administrator
Checks: C-42580r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features-> Notification Bar-> "Internet Explorer Processes" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_SECURITYBAND Criteria: If the value iexplore.exe is REG_SZ = 1, this is not a finding.

Fix: F-38628r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer -> Security Features-> Notification Bar-> "Internet Explorer Processes" to "Enabled".

a
Check for publishers certificate revocation must be enforced.
Low - V-32808 - SV-45116r4_rule
RMF Control
Severity
Low
CCI
Version
DTBI018
Vuln IDs
  • V-32808
Rule IDs
  • SV-45116r4_rule
Check for publisher's certificate revocation options should be enforced to ensure all PKI signed objects are validated. System Administrator
Checks: C-42471r5_chk

Open Internet Explorer. From the menu bar, select Tools. From the Tools drop-down menu, select Internet Options. From the Internet Options window, select the "Advanced" tab, from the Advanced tab window, scroll down to the Security category, and verify the "Check for publisher's certificate revocation" box is selected. Procedure: Use the Windows Registry Editor to navigate to the following key: HKCU\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing Criteria: If the value "State" is REG_DWORD = 23C00, this is not a finding.

Fix: F-38512r5_fix

Open Internet Explorer. From the menu bar, select Tools. From the Tools drop-down menu, select Internet Options. From the Internet Options window, select the "Advanced" tab from the Advanced tab window, scroll down to the Security category, and select the "Check for publisher's certificate revocation" box. Note: Manual entry in the registry key: HKCU\Software\Microsoft\Windows\Current Version\WinTrust\Trust Providers\Software Publishing for the value "State", set to REG_DWORD = 23C00, may first be required.

b
Do Not Track header must be sent.
Medium - V-34414 - SV-45046r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI1040
Vuln IDs
  • V-34414
Rule IDs
  • SV-45046r1_rule
This policy setting allows you to configure how Internet Explorer sends the Do Not Track (DNT) header. If you enable this policy setting, Internet Explorer sends the DNT:1 header on all HTTP and HTTPS requests. The DNT:1 header signals that servers should not track the user. If you disable this policy setting, Internet Explorer sends the DNT:1 header only when a Tracking Protection List is enabled, or when InPrivate Browsing mode is used. If you do not configure this policy setting, users can select the Always send Do Not Track header options on the Advanced tab of the Internet Options dialog box. When this option is selected, Internet Explorer sends the DNT:1 header on all HTTP and HTTPS requests.System AdministratorECSC-1
Checks: C-42425r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Control Panel-> Advanced Page "Always send Do Not Track header" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main Criteria: If the value DoNotTrack is REG_DWORD = 1, this is not a finding.

Fix: F-38459r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Control Panel-> Advanced Page "Always send Do Not Track header" to "Enabled".

b
Ability to install new versions of Internet Explorer automatically must be disallowed.
Medium - V-34425 - SV-45063r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI980
Vuln IDs
  • V-34425
Rule IDs
  • SV-45063r1_rule
This policy setting configures Internet Explorer to automatically install new versions of Internet Explorer when they are available. If you enable this policy setting, automatic upgrade of Internet Explorer will be turned on. If you disable this policy setting, automatic upgrade of Internet Explorer will be turned off. If you do not configure this policy, users can turn on or off automatic updates.System AdministratorECSC-1
Checks: C-42436r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer "Install new versions of Internet Explorer automatically" must be "Disabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main Criteria: If the value EnableAutoUpgrade is REG_DWORD = 0, this is not a finding.

Fix: F-38471r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer "Install new versions of Internet Explorer automatically" to "Disabled".

b
Displaying of the reveal password button must be disallowed.
Medium - V-34456 - SV-45140r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI1035
Vuln IDs
  • V-34456
Rule IDs
  • SV-45140r1_rule
This policy setting allows you to hide the reveal password button when Internet Explorer prompts users for a password. The reveal password button is displayed during password entry. When the user clicks the button, the current password value is visible until the mouse button is released (or until the tap ends). If you enable this policy setting, the reveal password button will be hidden for all password fields. Users and developers will not be able to depend on the reveal password button being displayed in any web form or web application. If you disable or do not configure this policy setting, the reveal password button can be shown by the application as a user types in a password. *Note: On at least Windows 8, if the "Do not display the reveal password button" policy setting located in Computer Configuration\Administrative Templates\Windows Components\Credential User Interface is enabled for the system, it will override this policy setting.System AdministratorECSC-1
Checks: C-42483r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Security Features "Do not display the reveal password button" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main Criteria: If the value DisablePasswordReveal is REG_DWORD = 1, this is not a finding.

Fix: F-38536r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Security Features "Do not display the reveal password button" to "Enabled".

b
Dragging of content from different domains across windows must be disallowed (Internet zone).
Medium - V-34457 - SV-45142r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI990
Vuln IDs
  • V-34457
Rule IDs
  • SV-45142r1_rule
This policy setting allows you to set options for dragging content from one domain to a different domain when the source and destination are in different windows. If you enable this policy setting, users can drag content from one domain to a different domain when the source and destination are in different windows. Users cannot change this setting. If you disable this policy setting, users cannot drag content from one domain to a different domain when both the source and destination are in different windows. Users cannot change this setting. If you do not configure this policy setting, users cannot drag content from one domain to a different domain when the source and destination are in different windows. Users can change this setting in the Internet Options dialog.System AdministratorECSC-1
Checks: C-42485r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Control Panel-> Security Page-> Internet Zone "Enable dragging of content from different domains across windows" must be "Enabled", and "Disabled" selected. Procedure: Use the windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 2709 is REG_DWORD = 3, this is not a finding.

Fix: F-38538r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Control Panel-> Security Page-> Internet Zone "Enable dragging of content from different domains across windows" to "Enabled", and select "Disabled".

b
Dragging of content from different domains across windows must be disallowed (Restricted Sites zone).
Medium - V-34458 - SV-45143r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI1005
Vuln IDs
  • V-34458
Rule IDs
  • SV-45143r1_rule
This policy setting allows you to set options for dragging content from one domain to a different domain when the source and destination are in different windows. If you enable this policy setting, users can drag content from one domain to a different domain when the source and destination are in different windows. Users cannot change this setting. If you enable this policy setting, users cannot drag content from one domain to a different domain when both the source and destination are in different windows. Users cannot change this setting. If you do not configure this policy setting, users cannot drag content from one domain to a different domain when the source and destination are in different windows. Users can change this setting in the Internet Options dialog.System AdministratorECSC-1
Checks: C-42486r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Control Panel-> Security Page-> Restricted Sites Zone "Enable dragging of content from different domains across windows" must be "Enabled", and "Disabled" selected. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 2709 is REG_DWORD = 3, this is not a finding.

Fix: F-38539r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Control Panel-> Security Page-> Restricted Sites Zone "Enable dragging of content from different domains across windows" to "Enabled", and select "Disabled".

b
Dragging of content from different domains within a window must be disallowed (Internet zone).
Medium - V-34459 - SV-45144r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI1000
Vuln IDs
  • V-34459
Rule IDs
  • SV-45144r1_rule
This policy setting allows you to set options for dragging content from one domain to a different domain when the source and destination are in the same window. If you enable this policy setting, users can drag content from one domain to a different domain when the source and destination are in the same window. Users cannot change this setting. If you disable this policy setting, users cannot drag content from one domain to a different domain when the source and destination are in the same window. Users cannot change this setting in the Internet Options dialog. If you do not configure this policy setting, users cannot drag content from one domain to a different domain when the source and destination are in the same window. Users can change this setting in the Internet Options dialog.System AdministratorECSC-1
Checks: C-42487r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Control Panel-> Security Page-> Internet Zone "Enable dragging of content from different domains within a window" must be "Enabled", and "Disabled" selected. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 2708 is REG_DWORD = 3, this is not a finding.

Fix: F-38540r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Control Panel-> Security Page-> Internet Zone "Enable dragging of content from different domains within a window" to "Enabled", and select "Disabled".

b
Dragging of content from different domains within a window must be disallowed (Restricted Sites zone).
Medium - V-34460 - SV-45146r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI1025
Vuln IDs
  • V-34460
Rule IDs
  • SV-45146r1_rule
This policy setting allows you to set options for dragging content from one domain to a different domain when the source and destination are in the same window. If you enable this policy setting, users can drag content from one domain to a different domain when the source and destination are in the same window. Users cannot change this setting. If you disable this policy setting, users cannot drag content from one domain to a different domain when the source and destination are in the same window. Users cannot change this setting in the Internet Options dialog. If you do not configure this policy setting, users cannot drag content from one domain to a different domain when the source and destination are in the same window. Users can change this setting in the Internet Options dialog.System AdministratorECSC-1
Checks: C-42489r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Control Panel-> Security Page-> Restricted Sites Zone "Enable dragging of content from different domains within a window" must be "Enabled", and "Disabled" selected. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 2708 is REG_DWORD = 3, this is not a finding.

Fix: F-38542r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Control Panel-> Security Page-> Restricted Sites Zone "Enable dragging of content from different domains within a window" to "Enabled", and select "Disabled".

b
Enhanced protected mode functionality must be enforced.
Medium - V-34461 - SV-45147r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI995
Vuln IDs
  • V-34461
Rule IDs
  • SV-45147r1_rule
Enhanced Protected Mode provides additional protection against malicious websites by using 64-bit processes on 64-bit versions of Windows. For computers running at least Windows 8, Enhanced Protected Mode also limits the locations Internet Explorer can read from in the registry and the file system. If you enable this policy setting, Enhanced Protected Mode will be turned on. Any zone that has Protected Mode enabled will use Enhanced Protected Mode. Users will not be able to disable Enhanced Protected Mode. If you disable this policy setting, Enhanced Protected Mode will be turned off. Any zone that has Protected Mode enabled will use the version of Protected Mode introduced in Internet Explorer 7 for Windows Vista. If you do not configure this policy, users will be able to turn on or turn off Enhanced Protected Mode on the Advanced tab of the Internet Options dialog.System AdministratorECSC-1
Checks: C-42490r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Control Panel-> Advanced Page "Turn on Enhanced Protected Mode" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main Criteria: If the value Isolation is REG_SZ = PMEM, this is not a finding.

Fix: F-38543r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Control Panel-> Advanced Page "Turn on Enhanced Protected Mode" to "Enabled".

b
Internet Explorer accelerator functionality must be disallowed.
Medium - V-34474 - SV-45217r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI1055
Vuln IDs
  • V-34474
Rule IDs
  • SV-45217r1_rule
The Internet Explorer Accelerator feature is for use with third-party applications and toolbars. This policy setting allows you to manage whether users can access accelerators. If you enable this policy setting, users cannot access accelerators. If you disable or do not configure this policy setting, users can access accelerators and install new accelerators. System AdministratorECSC-1
Checks: C-42565r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Accelerators "Turn off Accelerators" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Activities Criteria: If the value NoActivities is REG_DWORD = 1, this is not a finding.

Fix: F-38613r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Accelerators "Turn off Accelerators" to "Enabled".

b
Legacy filter functionality must be disallowed (Internet zone).
Medium - V-34489 - SV-45269r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI1045
Vuln IDs
  • V-34489
Rule IDs
  • SV-45269r1_rule
This policy setting specifies whether Internet Explorer renders legacy visual filters in this zone. If you enable this policy setting, you can control whether or not Internet Explorer renders legacy filters by selecting Enable, or Disable under Options in Group Policy Editor. If you disable, or do not configure this policy setting, users can choose whether or not to render filters in this zone. Users can change this setting on the Security tab of the Internet Options dialog box. Filters are not rendered by default in this zone.System AdministratorECSC-1
Checks: C-42616r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Control Panel-> Security Page-> Internet Zone "Render Legacy Filters" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\3 Criteria: If the value 270B is REG_DWORD = 3, this is not a finding.

Fix: F-38665r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Control Panel-> Security Page-> Internet Zone "Render Legacy Filters" to "Enabled", and select "Disable".

b
Legacy filter functionality must be disallowed (Restricted Sites zone).
Medium - V-34490 - SV-45270r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI1050
Vuln IDs
  • V-34490
Rule IDs
  • SV-45270r1_rule
This policy setting specifies whether Internet Explorer renders legacy visual filters in this zone. If you enable this policy setting, you can control whether or not Internet Explorer renders legacy filters by selecting Enable, or Disable under Options in Group Policy Editor. If you disable, or do not configure this policy setting, users can choose whether or not to render filters in this zone. Users can change this setting on the Security tab of the Internet Options dialog box. Filters are not rendered by default in this zone.System AdministratorECSC-1
Checks: C-42617r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Control Panel-> Security Page-> Restricted Sites Zone "Render Legacy Filters" must be "Enabled", and "Disable" selected from the drop-down box. Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\4 Criteria: If the value 270B is REG_DWORD = 3, this is not a finding.

Fix: F-38666r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Control Panel-> Security Page-> Restricted Sites Zone "Render Legacy Filters" to "Enabled", and select "Disabled".

b
URL Suggestions must be disallowed.
Medium - V-34590 - SV-45454r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI1030
Vuln IDs
  • V-34590
Rule IDs
  • SV-45454r1_rule
This policy setting turns off URL Suggestions. URL Suggestions allow users to auto complete URLs in the address bar based on common URLs. The list of common URLs is stored locally and is updated once a month. No user data is sent over the internet by this feature. If you enable this policy setting, URL Suggestions will be turned off. Users will not be able to turn on URL Suggestions. If you disable this policy setting, URL Suggestions will be turned on. Users will not be able to turn off URL Suggestions. If you do not configure this policy setting, URL Suggestions will be turned on. Users will be able to turn on or turn off URL Suggestions in the Internet Options dialog.System AdministratorECSC-1
Checks: C-42803r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Settings-> AutoComplete "Turn off URL Suggestions" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\DomainSuggestion Criteria: If the value Enabled is REG_DWORD = 0, this is not a finding.

Fix: F-38851r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Settings-> AutoComplete "Turn off URL Suggestions" to "Enabled".

b
When enhanced protected mode is enabled, ActiveX controls must be disallowed to run in protected mode.
Medium - V-34610 - SV-45478r1_rule
RMF Control
Severity
Medium
CCI
Version
DTBI985
Vuln IDs
  • V-34610
Rule IDs
  • SV-45478r1_rule
This setting prevents ActiveX controls from running in Protected Mode when Enhanced Protected Mode is enabled. When a user has an ActiveX control installed that is not compatible with Enhanced Protected Mode and a website attempts to load the control, Internet Explorer notifies the user and gives the option to run the website in regular Protected Mode. This policy setting disables this notification and forces all websites to run in Enhanced Protected Mode. Enhanced Protected Mode provides additional protection against malicious websites by using 64-bit processes on 64-bit versions of Windows. For computers running at least Windows 8, Enhanced Protected Mode also limits the locations Internet Explorer can read from in the registry and the file system. If you enable this policy setting, Internet Explorer will not give the user the option to disable Enhanced Protected Mode. All Protected Mode websites will run in Enhanced Protected Mode. If you disable or do not configure this policy setting, Internet Explorer notifies users and provides an option to run websites with incompatible ActiveX controls in regular Protected Mode.System AdministratorECSC-1
Checks: C-42826r1_chk

The policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Control Panel-> Advanced Page "Do not allow ActiveX controls to run in Protected Mode when Enhanced Protected Mode is enabled" must be "Enabled". Procedure: Use the Windows Registry Editor to navigate to the following key: HKLM\Software\Policies\Microsoft\Internet Explorer\Main Criteria: If the value DisableEPMCompat is REG_DWORD = 1, this is not a finding.

Fix: F-38875r1_fix

Set the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Internet Explorer-> Internet Control Panel-> Advanced Page "Do not allow ActiveX controls to run in Protected Mode when Enhanced Protected Mode is enabled" to "Enabled".

c
The installed version of IE must be a supported version.
High - V-64727 - SV-79217r2_rule
RMF Control
Severity
High
CCI
Version
DTBI002
Vuln IDs
  • V-64727
Rule IDs
  • SV-79217r2_rule
Unsupported versions of the operating system do not contain new security-related features and security patches that address known vulnerabilities. Software or hardware no longer supported by the manufacturer or vendor are not maintained or updated for current vulnerabilities, leaving them open to potential attack.
Checks: C-65469r4_chk

Procedure: Open Internet Explorer, Select Help, Select About. Microsoft support for Internet Explorer 10 ended 2020 January. If Internet Explorer 10 is installed on a system, this is a finding.

Fix: F-70657r1_fix

Upgrade Internet Explorer to a supported software version.