Cyber Trackr - Free Compliance Library
Cyber Trackr
The Free Compliance Library

Canonical Ubuntu 18.04 LTS Security Technical Implementation Guide

  • Version/Release: V2R15
  • Published: 2024-05-30
  • Released: 2024-07-24
  • Expand All:
  • Severity:
  • Sort:
Compare

Select any two versions of this STIG to compare the individual requirements

View

Select any old version/release of this STIG to view the previous requirements

This Security Technical Implementation Guide is published as a tool to improve the security of Department of Defense (DOD) information systems. The requirements are derived from the National Institute of Standards and Technology (NIST) 800-53 and related documents. Comments or proposed revisions to this document should be sent via email to the following address: disa.stig_spt@mail.mil.
c
Ubuntu operating systems booted with a BIOS must require authentication upon booting into single-user and maintenance modes.
AC-3 - High - CCI-000213 - V-219147 - SV-219147r958472_rule
RMF Control
AC-3
Severity
High
CCI
CCI-000213
Version
UBTU-18-010000
Vuln IDs
  • V-219147
  • V-100519
Rule IDs
  • SV-219147r958472_rule
  • SV-109623
To mitigate the risk of unauthorized access to sensitive information by entities that have been issued certificates by DoD-approved PKIs, all DoD systems (e.g., web servers and web portals) must be properly configured to incorporate access control methods that do not rely solely on the possession of a certificate for access. Successful authentication must not automatically give an entity access to an asset or security boundary. Authorization procedures and controls must be implemented to ensure each authenticated entity also has a validated and current authorization. Authorization is the process of determining whether an entity, once authenticated, is permitted to access a specific asset. Information systems use access control policies and enforcement mechanisms to implement this requirement. Access control policies include: identity-based policies, role-based policies, and attribute-based policies. Access enforcement mechanisms include: access control lists, access control matrices, and cryptography. These policies and mechanisms must be employed by the application to control access between users (or processes acting on behalf of users) and objects (e.g., devices, files, records, processes, programs, and domains) in the information system.
Checks: C-20872r802347_chk

Verify that an encrypted root password is set. This is only applicable on systems that use a basic Input/Output System BIOS. Run the following command to verify the encrypted password is set: $ grep –i password /boot/grub/grub.cfg password_pbkdf2 root grub.pbkdf2.sha512.10000.MFU48934NJA87HF8NSD34493GDHF84NG If the root password entry does not begin with “password_pbkdf2”, this is a finding.

Fix: F-20871r802348_fix

Configure the system to require a password for authentication upon booting into single-user and maintenance modes. Generate an encrypted (grub) password for root with the following command: $ grub-mkpasswd-pbkdf2 Enter Password: Reenter Password: PBKDF2 hash of your password is grub.pbkdf2.sha512.10000.MFU48934NJD84NF8NSD39993JDHF84NG Using the hash from the output, modify the "/etc/grub.d/40_custom" file with the following command to add a boot password: $ sudo sed -i '$i set superusers=\"root\"\npassword_pbkdf2 root <hash>' /etc/grub.d/40_custom where <hash> is the hash generated by grub-mkpasswd-pbdkf2 command. Configure grub to only require a password when accessing the bootloader: $ sudo sed -i -E 's/^CLASS="[^"]*/& --unrestricted/' /etc/grub.d/10_linux Generate an updated "grub.conf" file with the new password by using the following command: $ update-grub

c
Ubuntu operating systems booted with United Extensible Firmware Interface (UEFI) implemented must require authentication upon booting into single-user mode and maintenance.
AC-3 - High - CCI-000213 - V-219148 - SV-219148r958472_rule
RMF Control
AC-3
Severity
High
CCI
CCI-000213
Version
UBTU-18-010001
Vuln IDs
  • V-219148
  • V-100521
Rule IDs
  • SV-219148r958472_rule
  • SV-109625
To mitigate the risk of unauthorized access to sensitive information by entities that have been issued certificates by DoD-approved PKIs, all DoD systems (e.g., web servers and web portals) must be properly configured to incorporate access control methods that do not rely solely on the possession of a certificate for access. Successful authentication must not automatically give an entity access to an asset or security boundary. Authorization procedures and controls must be implemented to ensure each authenticated entity also has a validated and current authorization. Authorization is the process of determining whether an entity, once authenticated, is permitted to access a specific asset. Information systems use access control policies and enforcement mechanisms to implement this requirement. Access control policies include: identity-based policies, role-based policies, and attribute-based policies. Access enforcement mechanisms include: access control lists, access control matrices, and cryptography. These policies and mechanisms must be employed by the application to control access between users (or processes acting on behalf of users) and objects (e.g., devices, files, records, processes, programs, and domains) in the information system.
Checks: C-20873r808469_chk

Verify that an encrypted root password is set. This is only applicable on Ubuntu operating systems that use UEFI. Run the following command to verify the encrypted password is set: $ grep -i password /boot/efi/EFI/ubuntu/grub.cfg password_pbkdf2 root grub.pbkdf2.sha512.10000.VeryLongString If the root password entry does not begin with “password_pbkdf2”, this is a finding.

Fix: F-20872r808470_fix

Configure the system to require a password for authentication upon booting into single-user and maintenance modes. Generate an encrypted (grub) password for root with the following command: $ grub-mkpasswd-pbkdf2 Enter Password: Reenter Password: PBKDF2 hash of your password is grub.pbkdf2.sha512.10000.MFU48934NJD84NF8NSD39993JDHF84NG Using the hash from the output, modify the "/etc/grub.d/40_custom" file with the following command to add a boot password: $ sudo sed -i '$i set superusers=\"root\"\npassword_pbkdf2 root <hash>' /etc/grub.d/40_custom where <hash> is the hash generated by grub-mkpasswd-pbdkf2 command. Configure grub to only require a password when accessing the bootloader: $ sudo sed -i -E 's/^CLASS="[^"]*/& --unrestricted/' /etc/grub.d/10_linux Generate an updated "grub.conf" file with the new password by using the following command: $ grub-mkconfig -o /boot/efi/EFI/ubuntu/grub.cfg

b
The Ubuntu operating system must initiate session audits at system startup.
AU-14 - Medium - CCI-001464 - V-219149 - SV-219149r991555_rule
RMF Control
AU-14
Severity
Medium
CCI
CCI-001464
Version
UBTU-18-010002
Vuln IDs
  • V-219149
  • V-100523
Rule IDs
  • SV-219149r991555_rule
  • SV-109627
If auditing is enabled late in the startup process, the actions of some startup processes may not be audited. Some audit systems also maintain state information only available if auditing is enabled before a given process is created.
Checks: C-20874r304775_chk

Verify the Ubuntu operating system enables auditing at system startup. Check that the auditing is enabled in grub with the following command: grep "^\s*linux" /boot/grub/grub.cfg linux /vmlinuz-4.15.0-55-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash $vt_handoff audit=1 linux /vmlinuz-4.15.0-55-generic root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset audit=1 If any linux lines do not contain "audit=1", this is a finding.

Fix: F-20873r304776_fix

Configure the Ubuntu operating system to produce audit records at system startup. Edit /etc/default/grub file and add "audit=1" to the GRUB_CMDLINE_LINUX option. To update the grub config file run, sudo update-grub

b
Ubuntu operating systems handling data requiring data at rest protections must employ cryptographic mechanisms to prevent unauthorized disclosure and modification of the information at rest.
SC-28 - Medium - CCI-001199 - V-219150 - SV-219150r958552_rule
RMF Control
SC-28
Severity
Medium
CCI
CCI-001199
Version
UBTU-18-010003
Vuln IDs
  • V-219150
  • V-100525
Rule IDs
  • SV-219150r958552_rule
  • SV-109629
Information at rest refers to the state of information when it is located on a secondary storage device (e.g., disk drive and tape drive, when used for backups) within an operating system. This requirement addresses protection of user-generated data, as well as Ubuntu operating system-specific configuration data. Organizations may choose to employ different mechanisms to achieve confidentiality and integrity protections, as appropriate, in accordance with the security category and/or classification of the information. Satisfies: SRG-OS-000185-GPOS-00079, SRG-OS-000404-GPOS-00183, SRG-OS-000405-GPOS-00184
Checks: C-20875r304778_chk

If there is a documented and approved reason for not having data-at-rest encryption, this requirement is Not Applicable. Verify the Ubuntu operating system prevents unauthorized disclosure or modification of all information requiring at rest protection by using disk encryption. Determine the partition layout for the system with the following command: #sudo fdisk -l (..) Disk /dev/vda: 15 GiB, 16106127360 bytes, 31457280 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: 83298450-B4E3-4B19-A9E4-7DF147A5FEFB Device Start End Sectors Size Type /dev/vda1 2048 4095 2048 1M BIOS boot /dev/vda2 4096 2101247 2097152 1G Linux filesystem /dev/vda3 2101248 31455231 29353984 14G Linux filesystem (...) Verify that the system partitions are all encrypted with the following command: # more /etc/crypttab Every persistent disk partition present must have an entry in the file. If any partitions other than the boot partition or pseudo file systems (such as /proc or /sys) are not listed, this is a finding.

Fix: F-20874r304779_fix

To encrypt an entire partition, dedicate a partition for encryption in the partition layout. Note: Encrypting a partition in an already-installed system is more difficult because the existing partitions must be resized and changed.

c
The Ubuntu operating system must implement NIST FIPS-validated cryptography to protect classified information and for the following: to provision digital signatures, to generate cryptographic hashes, and to protect unclassified information requiring confidentiality and cryptographic protection in accordance with applicable federal laws, Executive Orders, directives, policies, regulations, and standards.
SC-13 - High - CCI-002450 - V-219151 - SV-219151r959006_rule
RMF Control
SC-13
Severity
High
CCI
CCI-002450
Version
UBTU-18-010005
Vuln IDs
  • V-219151
  • V-100527
Rule IDs
  • SV-219151r959006_rule
  • SV-109631
Use of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data. The operating system must implement cryptographic modules adhering to the higher standards approved by the federal government since this provides assurance they have been tested and validated. Satisfies: SRG-OS-000478-GPOS-00223, SRG-OS-000396-GPOS-00176
Checks: C-20876r304781_chk

Verify the system is configured to run in FIPS mode. Check that the system is configured to run in FIPS mode with the following command: # grep -i 1 /proc/sys/crypto/fips_enabled 1 If a value of "1" is not returned, this is a finding.

Fix: F-20875r880861_fix

Configure the system to run in FIPS mode. Add "fips=1" to the kernel parameter during the Ubuntu operating systems install. Enabling a FIPS mode on a pre-existing system involves a number of modifications to the Ubuntu operating system. Refer to the Ubuntu Server 18.04 FIPS 140-2 security policy document for instructions. A subscription to the "Ubuntu Pro" plan is required to obtain the FIPS Kernel cryptographic modules and enable FIPS.

a
The Ubuntu operating system must immediately notify the SA and ISSO (at a minimum) when allocated audit record storage volume reaches 75% of the repository maximum audit record storage capacity.
AU-5 - Low - CCI-001855 - V-219152 - SV-219152r971542_rule
RMF Control
AU-5
Severity
Low
CCI
CCI-001855
Version
UBTU-18-010006
Vuln IDs
  • V-219152
  • V-100529
Rule IDs
  • SV-219152r971542_rule
  • SV-109633
If security personnel are not notified immediately when storage volume reaches 75% utilization, they are unable to plan for audit record storage capacity expansion.
Checks: C-20877r304784_chk

Verify the Ubuntu operating system notifies the System Administrator (SA) and Information System Security Officer (ISSO) (at a minimum) when allocated audit record storage volume reaches 75% of the repository maximum audit record storage capacity. Check that the Ubuntu operating system notifies the SA and ISSO (at a minimum) when allocated audit record storage volume reaches 75% of the repository maximum audit record storage capacity with the following command: # sudo grep ^space_left_action /etc/audit/auditd.conf space_left_action email # sudo grep ^space_left /etc/audit/auditd.conf space_left 250000 If the "space_left" parameter is missing, set to blanks or set to a value less than 25% of the space free in the allocated audit record storage, this is a finding. If the "space_left_action" parameter is missing or set to blanks, this is a finding. If the "space_left_action" is set to "syslog", the system logs the event, but does not generate a notification, so this is a finding. If the "space_left_action" is set to "exec", the system executes a designated script. If this script informs the SA of the event, this is not a finding. If the "space_left_action" is set to "email" check the value of the "action_mail_acct" parameter with the following command: # sudo grep action_mail_acct /etc/audit/auditd.conf action_mail_acct root@localhost The "action_mail_acct" parameter, if missing, defaults to "root". If the "action_mail_acct parameter" is not set to the e-mail address of the system administrator(s) and/or ISSO, this is a finding. Note: If the email address of the system administrator is on a remote system a mail package must be available.

Fix: F-20876r304785_fix

Edit /etc/audit/auditd.conf and set the space_left_action parameter to "exec" or "email". If the space_left_action parameter is set to "email" set the action_mail_acct parameter to an e-mail address for the System Administrator (SA) and Information System Security Officer (ISSO). If the space_left_action parameter is set to "exec", make sure the command being execute notifies the System Administrator (SA) and Information System Security Officer (ISSO). Edit /etc/audit/auditd.conf and set the space_left parameter to be, at least, 25% of the repository maximum audit record storage capacity.

a
The Ubuntu operating system audit event multiplexor must be configured to off-load audit logs onto a different system in real time, if the system is interconnected.
AU-4 - Low - CCI-001851 - V-219153 - SV-219153r959008_rule
RMF Control
AU-4
Severity
Low
CCI
CCI-001851
Version
UBTU-18-010007
Vuln IDs
  • V-219153
  • V-100531
Rule IDs
  • SV-219153r959008_rule
  • SV-109635
Information stored in one location is vulnerable to accidental or incidental deletion or alteration. Off-loading is a common process in information systems with limited audit storage capacity.
Checks: C-20878r304787_chk

Verify the audit event multiplexor is configured to off-load audit records to a different system or storage media from the system being audited. Check that audisp-remote plugin is installed: # sudo dpkg -s audispd-plugins If status is "not installed", this is a finding. Check that the records are being off-loaded to a remote server with the following command: # sudo grep -i active /etc/audisp/plugins.d/au-remote.conf active = yes If "active" is not set to "yes", or the line is commented out, this is a finding. Check that audisp-remote plugin is configured to send audit logs to a different system: # sudo grep -i ^remote_server /etc/audisp/audisp-remote.conf remote_server = 192.168.122.126 If the remote_server parameter is not set or is set with a local address, or is set with invalid address, this is a finding.

Fix: F-20877r304788_fix

Configure the audit event multiplexor to off-load audit records to a different system or storage media from the system being audited. Install the audisp-remote plugin: # sudo apt-get install audispd-plugins -y Set the audisp-remote plugin as active, by editing the /etc/audisp/plugins.d/au-remote.conf file: # sudo sed -i -E 's/active\s*=\s*no/active = yes/' /etc/audisp/plugins.d/au-remote.conf Set the address of the remote machine, by editing the /etc/audisp/audisp-remote.conf file: # sudo sed -i -E 's/(remote_server\s*=).*/\1 <remote addr>/' audisp-remote.conf where <remote addr> must be substituted by the address of the remote server receiving the audit log. Make the audit service reload its configuration files: # sudo systemctl restart auditd.service

a
The Ubuntu operating system must have a crontab script running weekly to off-load audit events of standalone systems.
AU-4 - Low - CCI-001851 - V-219154 - SV-219154r959008_rule
RMF Control
AU-4
Severity
Low
CCI
CCI-001851
Version
UBTU-18-010008
Vuln IDs
  • V-219154
  • V-100533
Rule IDs
  • SV-219154r959008_rule
  • SV-109637
Information stored in one location is vulnerable to accidental or incidental deletion or alteration. Off-loading is a common process in information systems with limited audit storage capacity.
Checks: C-20879r304790_chk

Verify there is a script which off-loads audit data and if that script runs weekly. Check if there is a script in the /etc/cron.weekly directory which off-loads audit data: # sudo ls /etc/cron.weekly audit-offload Check if the script inside the file does offloading of audit logs to an external media. If the script file does not exist or if the script file doesn't offload audit logs, this is a finding.

Fix: F-20878r304791_fix

Create a script which off-loads audit logs to external media and runs weekly. Script must be located into the /etc/cron.weekly directory.

b
Advance package Tool (APT) must be configured to prevent the installation of patches, service packs, device drivers, or Ubuntu operating system components without verification they have been digitally signed using a certificate that is recognized and approved by the organization.
CM-5 - Medium - CCI-001749 - V-219155 - SV-219155r982212_rule
RMF Control
CM-5
Severity
Medium
CCI
CCI-001749
Version
UBTU-18-010016
Vuln IDs
  • V-219155
  • V-100535
Rule IDs
  • SV-219155r982212_rule
  • SV-109639
Changes to any software components can have significant effects on the overall security of the Ubuntu operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor. Accordingly, patches, service packs, device drivers, or Ubuntu operating system components must be signed with a certificate recognized and approved by the organization. Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. The Ubuntu operating system should not have to verify the software again. This requirement does not mandate DoD certificates for this purpose; however, the certificate used to verify the software must be from an approved CA.
Checks: C-20880r304793_chk

Verify that Advance package Tool (APT) is configured to prevent the installation of patches, service packs, device drivers, or Ubuntu operating system components without verification they have been digitally signed using a certificate that is recognized and approved by the organization. Check that the "AllowUnauthenticated" variable is not set at all or set to "false" with the following command: # grep AllowUnauthenticated /etc/apt/apt.conf.d/* /etc/apt/apt.conf.d/01-vendor-Ubuntu:APT::Get::AllowUnauthenticated "false"; If any of the files returned from the command with "AllowUnauthenticated" set to "true", this is a finding.

Fix: F-20879r304794_fix

Configure Advance package Tool (APT) to prevent the installation of patches, service packs, device drivers, or Ubuntu operating system components without verification they have been digitally signed using a certificate that is recognized and approved by the organization. Remove/Update any APT configuration file that contain the variable "AllowUnauthenticated" to "false", or remove "AllowUnauthenticated" entirely from each file. Below is an example of setting the "AllowUnauthenticated" variable to "false": APT::Get::AllowUnauthenticated "false";

b
The Ubuntu operating system must be configured so that Advance package Tool (APT) removes all software components after updated versions have been installed.
SI-2 - Medium - CCI-002617 - V-219156 - SV-219156r958936_rule
RMF Control
SI-2
Severity
Medium
CCI
CCI-002617
Version
UBTU-18-010017
Vuln IDs
  • V-219156
  • V-100537
Rule IDs
  • SV-219156r958936_rule
  • SV-109641
Previous versions of software components that are not removed from the information system after updates have been installed may be exploited by adversaries. Some information technology products may remove older versions of software automatically from the information system.
Checks: C-20881r304796_chk

Verify Advance package Tool (APT) is configured to remove all software components after updated versions have been installed. Check that APT is configured to remove all software components after updating with the following command: # grep -i remove-unused /etc/apt/apt.conf.d/50unattended-upgrades Unattended-Upgrade::Remove-Unused-Dependencies "true"; Unattended-Upgrade::Remove-Unused-Kernel-Packages "true"; If the "::Remove-Unused-Dependencies" and "::Remove-Unused-Kernel-Packages" parameters are not set to "true", or are missing, or are commented out, this is a finding.

Fix: F-20880r304797_fix

Configure APT to remove all software components after updated versions have been installed. Add or updated the following options to the "/etc/apt/apt.conf.d/50unattended-upgrades" file: Unattended-Upgrade::Remove-Unused-Dependencies "true"; Unattended-Upgrade::Remove-Unused-Kernel-Packages "true";

c
The Ubuntu operating system must not have the Network Information Service (NIS) package installed.
CM-7 - High - CCI-000381 - V-219157 - SV-219157r958478_rule
RMF Control
CM-7
Severity
High
CCI
CCI-000381
Version
UBTU-18-010018
Vuln IDs
  • V-219157
  • V-100539
Rule IDs
  • SV-219157r958478_rule
  • SV-109643
Removing the Network Information Service (NIS) package decreases the risk of the accidental (or intentional) activation of NIS or NIS+ services.
Checks: C-20882r304799_chk

Verify that the Network Information Service (NIS) package is not installed on the Ubuntu operating system. Check to see if the NIS package is installed with the following command: # dpkg -l | grep nis If the NIS package is installed, this is a finding.

Fix: F-20881r304800_fix

Configure the Ubuntu operating system to disable non-essential capabilities by removing the Network Information Service (NIS) package from the system with the following command: # sudo apt-get remove nis

c
The Ubuntu operating system must not have the rsh-server package installed.
CM-7 - High - CCI-000381 - V-219158 - SV-219158r958478_rule
RMF Control
CM-7
Severity
High
CCI
CCI-000381
Version
UBTU-18-010019
Vuln IDs
  • V-219158
  • V-100541
Rule IDs
  • SV-219158r958478_rule
  • SV-109645
It is detrimental for Ubuntu operating systems to provide, or install by default, functionality exceeding requirements or mission objectives. These unnecessary capabilities or services are often overlooked and therefore may remain unsecured. They increase the risk to the platform by providing additional attack vectors. Ubuntu operating systems are capable of providing a wide variety of functions and services. Some of the functions and services, provided by default, may not be necessary to support essential organizational operations (e.g., key missions, functions). The rsh-server service provides an unencrypted remote access service that does not provide for the confidentiality and integrity of user passwords or the remote session and has very weak authentication. If a privileged user were to log on using this service, the privileged user password could be compromised.
Checks: C-20883r304802_chk

Check to see if the rsh-server package is installed with the following command: # dpkg -l | grep rsh-server If the rsh-server package is installed, this is a finding.

Fix: F-20882r304803_fix

Configure the Ubuntu operating system to disable non-essential capabilities by removing the rsh-server package from the system with the following command: # sudo apt-get remove rsh-server

b
The Ubuntu operating system must deploy Endpoint Security for Linux Threat Prevention (ENSLTP).
SI-2 - Medium - CCI-001233 - V-219159 - SV-219159r982191_rule
RMF Control
SI-2
Severity
Medium
CCI
CCI-001233
Version
UBTU-18-010021
Vuln IDs
  • V-219159
  • V-100545
Rule IDs
  • SV-219159r982191_rule
  • SV-109649
Without the use of automated mechanisms to scan for security flaws on a continuous and/or periodic basis, the operating system or other system components may remain vulnerable to the exploits presented by undetected software flaws. To support this requirement, the Ubuntu operating system may have an integrated solution incorporating continuous scanning using HBSS and periodic scanning using other tools, as specified in the requirement.
Checks: C-20884r858513_chk

Check that the "mcafeetp" package has been installed: # dpkg -l | grep -i mcafeetp If the "mcafeetp" package is not installed, this is a finding. Check that the daemon is running: # /opt/McAfee/ens/tp/init/mfetpd-control.sh status If the daemon is not running, this is a finding.

Fix: F-20883r858514_fix

Configure the Ubuntu operating system to use ENSLTP. Install the mcafeetp package via the ePO server.

b
The Ubuntu operating system must be configured to preserve log records from failure events.
SC-24 - Medium - CCI-001665 - V-219160 - SV-219160r991562_rule
RMF Control
SC-24
Severity
Medium
CCI
CCI-001665
Version
UBTU-18-010022
Vuln IDs
  • V-219160
  • V-100547
Rule IDs
  • SV-219160r991562_rule
  • SV-109651
Failure to a known state can address safety or security in accordance with the mission/business needs of the organization. Failure to a known secure state helps prevent a loss of confidentiality, integrity, or availability in the event of a failure of the information system or a component of the system. Preserving operating system state information helps to facilitate operating system restart and return to the operational mode of the organization with least disruption to mission/business processes.
Checks: C-20885r304808_chk

Verify the log service is configured to collect system failure events. Check that the log service is installed properly with the following command: # dpkg -l | grep rsyslog ii rsyslog 8.32.0-1ubuntu4 amd64 reliable system and kernel logging daemon If the "rsyslog" package is not installed, this is a finding. Check that the log service is enabled with the following command: # sudo systemctl is-enabled rsyslog enabled If the command above returns "disabled", this is a finding. Check that the log service is properly running and active on the system with the following command: # systemctl is-active rsyslog active If the command above returns "inactive", this is a finding.

Fix: F-20884r304809_fix

Configure the log service to collect failure events. Install the log service (if the log service is not already installed) with the following command: # sudo apt-get install rsyslog Enable the log service with the following command: # sudo systemctl enable rsyslog Restart the log service with the following command: # sudo systemctl restart rsyslog

b
The Ubuntu operating system must have an application firewall installed in order to control remote access methods.
AC-17 - Medium - CCI-002314 - V-219161 - SV-219161r958672_rule
RMF Control
AC-17
Severity
Medium
CCI
CCI-002314
Version
UBTU-18-010023
Vuln IDs
  • V-219161
  • V-100549
Rule IDs
  • SV-219161r958672_rule
  • SV-109653
Remote access services, such as those providing remote access to network devices and information systems, which lack automated control capabilities, increase risk and make remote user access management difficult at best. Remote access is access to DoD nonpublic information systems by an authorized user (or an information system) communicating through an external, non-organization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless. Ubuntu operating system functionality (e.g., RDP) must be capable of taking enforcement action if the audit reveals unauthorized activity. Automated control of remote access sessions allows organizations to ensure ongoing compliance with remote access policies by enforcing connection rules of remote access applications on a variety of information system components (e.g., servers, workstations, notebook computers, smartphones, and tablets).
Checks: C-20886r304811_chk

Verify that the Uncomplicated Firewall is installed. Check that the Uncomplicated Firewall is installed with the following command: # dpkg -l | grep ufw ii ufw 0.35-0Ubuntu2 If the "ufw" package is not installed, ask the System Administrator is another application firewall is installed. If no application firewall is installed this is a finding.

Fix: F-20885r304812_fix

Install the Uncomplicated Firewall by using the following command: # sudo apt-get install ufw

a
The Ubuntu operating system audit event multiplexor must be configured to off-load audit logs onto a different system or storage media from the system being audited.
AU-4 - Low - CCI-001851 - V-219162 - SV-219162r958754_rule
RMF Control
AU-4
Severity
Low
CCI
CCI-001851
Version
UBTU-18-010025
Vuln IDs
  • V-219162
  • V-100551
Rule IDs
  • SV-219162r958754_rule
  • SV-109655
Information stored in one location is vulnerable to accidental or incidental deletion or alteration. Off-loading is a common process in information systems with limited audit storage capacity.
Checks: C-20887r853366_chk

Verify the audit event multiplexor is configured to off-load audit records to a different system or storage media from the system being audited. Check that audisp-remote plugin is installed: # sudo dpkg -s audispd-plugins If status is "not installed", verify that another method to off-load audit logs has been implemented. Check that the records are being off-loaded to a remote server with the following command: # sudo grep -i active /etc/audisp/plugins.d/au-remote.conf active = yes If "active" is not set to "yes", or the line is commented out, ask the System Administrator to indicate how the audit logs are off-loaded to a different system or storage media. If there is no evidence that the system is configured to off-load audit logs to a different system or storage media, this is a finding.

Fix: F-20886r304815_fix

Configure the audit event multiplexor to off-load audit records to a different system or storage media from the system being audited. Install the audisp-remote plugin: # sudo apt-get install audispd-plugins -y Set the audisp-remote plugin as active, by editing the /etc/audisp/plugins.d/au-remote.conf file: # sudo sed -i -E 's/active\s*=\s*no/active = yes/' /etc/audisp/plugins.d/au-remote.conf Set the address of the remote machine, by editing the /etc/audisp/audisp-remote.conf file: # sudo sed -i -E 's/(remote_server\s*=).*/\1 <remote addr>/' audisp-remote.conf where <remote addr> must be substituted by the address of the remote server receiving the audit log. Make the audit service reload its configuration files: # sudo systemctl restart auditd.service

a
The Ubuntu operating system must be configured such that Pluggable Authentication Module (PAM) prohibits the use of cached authentications after one day.
IA-5 - Low - CCI-002007 - V-219163 - SV-219163r958828_rule
RMF Control
IA-5
Severity
Low
CCI
CCI-002007
Version
UBTU-18-010030
Vuln IDs
  • V-219163
  • V-100553
Rule IDs
  • SV-219163r958828_rule
  • SV-109657
If cached authentication information is out-of-date, the validity of the authentication information may be questionable.
Checks: C-20888r304817_chk

If smart card authentication is not being used on the system this item is Not Applicable. Verify that Pluggable Authentication Module (PAM) prohibits the use of cached authentications after one day. Check that PAM prohibits the use of cached authentications after one day with the following command: # sudo grep offline_credentials_expiration /etc/sssd/sssd.conf /etc/sssd/conf.d/*.conf offline_credentials_expiration = 1 If "offline_credentials_expiration" is not set to a value of "1", in /etc/sssd/sssd.conf or in a file with a name ending in .conf in the /etc/sssd/conf.d/ directory, this is a finding.

Fix: F-20887r304818_fix

Configure Pluggable Authentication Module (PAM) to prohibit the use of cached authentications after one day. Add or change the following line in "/etc/sssd/sssd.conf" just below the line "[pam]". offline_credentials_expiration = 1 Note: It is valid for this configuration to be in a file with a name that ends with ".conf" and does not begin with a "." in the /etc/sssd/conf.d/ directory instead of the /etc/sssd/sssd.conf file.

a
The Ubuntu operating system must enforce a delay of at least 4 seconds between logon prompts following a failed logon attempt.
CM-6 - Low - CCI-000366 - V-219164 - SV-219164r991588_rule
RMF Control
CM-6
Severity
Low
CCI
CCI-000366
Version
UBTU-18-010031
Vuln IDs
  • V-219164
  • V-100555
Rule IDs
  • SV-219164r991588_rule
  • SV-109659
Limiting the number of logon attempts over a certain time interval reduces the chances that an unauthorized user may gain access to an account.
Checks: C-20889r304820_chk

Verify the Ubuntu operating system enforces a delay of at least 4 seconds between logon prompts following a failed logon attempt. Check that the Ubuntu operating system enforces a delay of at least 4 seconds between logon prompts with the following command: # grep pam_faildelay /etc/pam.d/common-auth auth required pam_faildelay.so delay=4000000 If the line is not present, or is commented out, this is a finding.

Fix: F-20888r304821_fix

Configure the Ubuntu operating system to enforce a delay of at least 4 seconds between logon prompts following a failed logon attempt. Edit the file "/etc/pam.d/common-auth" and set the parameter "pam_faildelay" to a value of 4000000 or greater: auth required pam_faildelay.so delay=4000000

a
The Ubuntu operating system must display the date and time of the last successful account logon upon logon.
AC-9 - Low - CCI-000052 - V-219165 - SV-219165r991589_rule
RMF Control
AC-9
Severity
Low
CCI
CCI-000052
Version
UBTU-18-010032
Vuln IDs
  • V-219165
  • V-100557
Rule IDs
  • SV-219165r991589_rule
  • SV-109661
Configuring the Ubuntu operating system to implement organization-wide security implementation guides and security checklists ensures compliance with federal standards and establishes a common security baseline across DoD that reflects the most restrictive security posture consistent with operational requirements. Configuration settings are the set of parameters that can be changed in hardware, software, or firmware components of the system that affect the security posture and/or functionality of the system. Security-related parameters are those parameters impacting the security state of the system, including the parameters required to satisfy other security control requirements. Security-related parameters include, for example: registry settings; account, file, directory permission settings; and settings for functions, ports, protocols, services, and remote connections.
Checks: C-20890r304823_chk

Verify users are provided with feedback on when account accesses last occurred. Check that "pam_lastlog" is used and not silent with the following command: # grep pam_lastlog /etc/pam.d/login session required pam_lastlog.so showfailed If "pam_lastlog" is missing from "/etc/pam.d/login" file, is not "required", or the "silent" option is present, this is a finding.

Fix: F-20889r304824_fix

Configure the Ubuntu operating system to provide users with feedback on when account accesses last occurred by setting the required configuration options in "/etc/pam.d/postlogin-ac". Add the following line to the top of "/etc/pam.d/login": session required pam_lastlog.so showfailed

b
The Ubuntu operating system must be configured so that three consecutive invalid logon attempts by a user automatically locks the account until released by an administrator.
AC-7 - Medium - CCI-000044 - V-219166 - SV-219166r958388_rule
RMF Control
AC-7
Severity
Medium
CCI
CCI-000044
Version
UBTU-18-010033
Vuln IDs
  • V-219166
  • V-100559
Rule IDs
  • SV-219166r958388_rule
  • SV-109663
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, otherwise known as brute-force attacks, is reduced. Limits are imposed by locking the account. Satisfies: SRG-OS-000329-GPOS-00128
Checks: C-20891r802353_chk

Verify that the Ubuntu operating system utilizes the "pam_faillock" module with the following command: $ grep faillock /etc/pam.d/common-auth auth [default=die] pam_faillock.so authfail auth sufficient pam_faillock.so authsucc If the pam_faillock.so module is not present in the "/etc/pam.d/common-auth" file, this is a finding. Verify the pam_faillock module is configured to use the following options: $ sudo egrep 'silent|audit|deny|fail_interval| unlock_time' /etc/security/faillock.conf audit silent deny = 3 fail_interval = 900 unlock_time = 0 If the "silent" keyword is missing or commented out, this is a finding. If the "audit" keyword is missing or commented out, this is a finding. If the "deny" keyword is missing, commented out, or set to a value greater than 3, this is a finding. If the "fail_interval" keyword is missing, commented out, or set to a value greater than 900, this is a finding. If the "unlock_time" keyword is missing, commented out, or is not set to 0, this is a finding.

Fix: F-20890r802354_fix

Configure the Ubuntu operating system to utilize the "pam_faillock" module. Edit the /etc/pam.d/common-auth file. Add the following lines below the "auth" definition for pam_unix.so: auth [default=die] pam_faillock.so authfail auth sufficient pam_faillock.so authsucc Configure the "pam_faillock" module to use the following options: Edit the /etc/security/faillock.conf file and add/update the following keywords and values: audit silent deny = 3 fail_interval = 900 unlock_time = 0

b
The Ubuntu operating system must display the Standard Mandatory DoD Notice and Consent Banner before granting local access to the system via a graphical user logon.
AC-8 - Medium - CCI-000050 - V-219167 - SV-219167r958392_rule
RMF Control
AC-8
Severity
Medium
CCI
CCI-000050
Version
UBTU-18-010035
Vuln IDs
  • V-219167
  • V-100561
Rule IDs
  • SV-219167r958392_rule
  • SV-109665
The banner must be acknowledged by the user prior to allowing the user access to the operating system. This provides assurance that the user has seen the message and accepted the conditions for access. If the consent banner is not acknowledged by the user, DoD will not be in compliance with system use notifications required by law. To establish acceptance of the application usage policy, a click-through banner at system logon is required. The system must prevent further activity until the user executes a positive action to manifest agreement by clicking on a box indicating "OK".
Checks: C-20892r304829_chk

Verify the Ubuntu operating system displays the Standard Mandatory DoD Notice and Consent Banner before granting access to the operating system via a graphical user logon. Note: If the system does not have Graphical User Interface installed, this requirement is Not Applicable. Check that the operating system displays the exact approved Standard Mandatory DoD Notice and Consent Banner text with the command: # grep banner-message-enable /etc/gdm3/greeter.dconf-defaults banner-message-enable=true If the line is commented out or set to "false", this is a finding. # grep banner-message-text /etc/gdm3/greeter.dconf-defaults banner-message-text="You are accessing a U.S. Government \(USG\) Information System \(IS\) that is provided for USG-authorized use only.\s+By using this IS \(which includes any device attached to this IS\), you consent to the following conditions:\s+-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct \(PM\), law enforcement \(LE\), and counterintelligence \(CI\) investigations.\s+-At any time, the USG may inspect and seize data stored on this IS.\s+-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.\s+-This IS includes security measures \(e.g., authentication and access controls\) to protect USG interests--not for your personal benefit or privacy.\s+-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details." If the banner-message-text is missing, commented out, or the text does not match the Standard Mandatory DoD Notice and Consent Banner exactly, this is a finding.

Fix: F-20891r304830_fix

Edit the /etc/gdm3/greeter.dconf-defaults file. Uncomment (remove the leading '#' characters) the following 3 configuration lines: [org/gnome/login-screen] banner-message-enable=true banner-message-text='Welcome' Note: the lines are all near the bottom of the file but they are not adjacent to each other. Edit the banner-message-text='Welcome' line to contain the appropriate banner message text as shown below: banner-message-text='You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only.\n\nBy using this IS (which includes any device attached to this IS), you consent to the following conditions:\n\n-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.\n\n-At any time, the USG may inspect and seize data stored on this IS.\n\n-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.\n\n-This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy.\n\n-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.' Note that it is similar to the text in /etc/issue but it is all on a single line and the newline characters have been replaced with \n. # sudo dconf update # sudo systemctl restart gdm3

b
The Ubuntu operating system must prevent direct login into the root account.
IA-2 - Medium - CCI-000770 - V-219168 - SV-219168r982205_rule
RMF Control
IA-2
Severity
Medium
CCI
CCI-000770
Version
UBTU-18-010036
Vuln IDs
  • V-219168
  • V-100563
Rule IDs
  • SV-219168r982205_rule
  • SV-109667
To assure individual accountability and prevent unauthorized access, organizational users must be individually identified and authenticated. A group authenticator is a generic account used by multiple individuals. Use of a group authenticator alone does not uniquely identify individual users. Examples of the group authenticator is the UNIX OS "root" user account, the Windows "Administrator" account, the "sa" account, or a "helpdesk" account. For example, the UNIX and Windows operating systems offer a 'switch user' capability allowing users to authenticate with their individual credentials and, when needed, 'switch' to the administrator role. This method provides for unique individual authentication prior to using a group authenticator. Users (and any processes acting on behalf of users) need to be uniquely identified and authenticated for all accesses other than those accesses explicitly identified and documented by the organization, which outlines specific user actions that can be performed on the operating system without identification or authentication. Requiring individuals to be authenticated with an individual authenticator prior to using a group authenticator allows for traceability of actions, as well as adding an additional level of protection of the actions that can be taken with group account knowledge.
Checks: C-20893r304832_chk

Verify the Ubuntu operating system prevents direct logins to the root account. Check that the Ubuntu operating system prevents direct logins to the root account with the following command: # sudo passwd -S root root L 11/11/2017 0 99999 7 -1 If the output does not contain "L" in the second field to indicate the account is locked, this is a finding.

Fix: F-20892r304833_fix

Configure the Ubuntu operating system to prevent direct logins to the root account by performing the following operations: sudo passwd -l root

c
The Ubuntu operating system must be configured so that only users who need access to security functions are part of the sudo group.
SC-3 - High - CCI-001084 - V-219169 - SV-219169r958518_rule
RMF Control
SC-3
Severity
High
CCI
CCI-001084
Version
UBTU-18-010037
Vuln IDs
  • V-219169
  • V-100565
Rule IDs
  • SV-219169r958518_rule
  • SV-109669
An isolation boundary provides access control and protects the integrity of the hardware, software, and firmware that perform security functions. Security functions are the hardware, software, and/or firmware of the information system responsible for enforcing the system security policy and supporting the isolation of code and data on which the protection is based. Operating systems implement code separation (i.e., separation of security functions from nonsecurity functions) in a number of ways, including through the provision of security kernels via processor rings or processor modes. For non-kernel code, security function isolation is often achieved through file system protections that serve to protect the code on disk and address space protections that protect executing code. Developers and implementers can increase the assurance in security functions by employing well-defined security policy models; structured, disciplined, and rigorous hardware and software development techniques; and sound system/security engineering principles. Implementation may include isolation of memory space and libraries. The Ubuntu operating system restricts access to security functions through the use of access control mechanisms and by implementing least privilege capabilities.
Checks: C-20894r304835_chk

Verify that the sudo group has only members who should have access to security functions. # grep sudo /etc/group sudo:x:27:foo If the sudo group contains users not needing access to security functions, this is a finding.

Fix: F-20893r304836_fix

Configure the sudo group with only members requiring access to security functions. To remove a user from the sudo group run: sudo gpasswd -d <username> sudo

b
The Ubuntu operating system must display the Standard Mandatory DoD Notice and Consent Banner before granting any publically accessible connection to the system.
AC-8 - Medium - CCI-000048 - V-219170 - SV-219170r958586_rule
RMF Control
AC-8
Severity
Medium
CCI
CCI-000048
Version
UBTU-18-010038
Vuln IDs
  • V-219170
  • V-100567
Rule IDs
  • SV-219170r958586_rule
  • SV-109671
Display of a standardized and approved use notification before granting access to the Ubuntu operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance. System use notifications are required only for access via logon interfaces with human users and are not required when such human interfaces do not exist. The banner must be formatted in accordance with applicable DoD policy: "You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details." Satisfies: SRG-OS-000228-GPOS-00088, SRG-OS-000023-GPOS-00006
Checks: C-20895r304838_chk

Verify the Ubuntu operating system displays the Standard Mandatory DoD Notice and Consent Banner before granting access to the Ubuntu operating system via a ssh logon. Check that the Ubuntu operating system displays the Standard Mandatory DoD Notice and Consent Banner before granting access to the Ubuntu operating system via a ssh logon with the following command: # grep -i banner /etc/ssh/sshd_config Banner /etc/issue The command will return the banner option along with the name of the file that contains the ssh banner. If the line is commented out, this is a finding. Check the specified banner file to check that it matches the Standard Mandatory DoD Notice and Consent Banner exactly: # cat /etc/issue “You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.” If the banner text does not match the Standard Mandatory DoD Notice and Consent Banner exactly, this is a finding.

Fix: F-20894r304839_fix

Configure the Ubuntu operating system to display the Standard Mandatory DoD Notice and Consent Banner before granting access to the system via SSH logon. Edit the SSH daemon configuration "/etc/ssh/sshd_config" file. Uncomment the banner keyword and configure it to point to the file that contains the correct banner. An example of this configure is below: Banner /etc/issue Either create the file containing the banner, or replace the text in the file with the Standard Mandatory DoD Notice and Consent Banner. The DoD required text is: "You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details." In order for the changes to take effect, the SSH daemon must be restarted. # sudo systemctl restart sshd.service

a
The Ubuntu operating system must enforce password complexity by requiring that at least one upper-case character be used.
IA-5 - Low - CCI-000192 - V-219172 - SV-219172r982195_rule
RMF Control
IA-5
Severity
Low
CCI
CCI-000192
Version
UBTU-18-010100
Vuln IDs
  • V-219172
  • V-100571
Rule IDs
  • SV-219172r982195_rule
  • SV-109675
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.
Checks: C-20897r304844_chk

Verify the Ubuntu operating system enforces password complexity by requiring that at least one upper-case character be used. Determine if the field "ucredit" is set in the "/etc/security/pwquality.conf" file with the following command: # grep -i "ucredit" /etc/security/pwquality.conf ucredit=-1 If the "ucredit" parameter is greater than "-1", or is commented out, this is a finding.

Fix: F-20896r304845_fix

Add or update the "/etc/security/pwquality.conf" file to contain the "ucredit" parameter: ucredit=-1

a
The Ubuntu operating system must enforce password complexity by requiring that at least one lower-case character be used.
IA-5 - Low - CCI-000193 - V-219173 - SV-219173r982196_rule
RMF Control
IA-5
Severity
Low
CCI
CCI-000193
Version
UBTU-18-010101
Vuln IDs
  • V-219173
  • V-100573
Rule IDs
  • SV-219173r982196_rule
  • SV-109677
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.
Checks: C-20898r304847_chk

Verify the Ubuntu operating system enforces password complexity by requiring that at least one lower-case character be used. Determine if the field "lcredit" is set in the "/etc/security/pwquality.conf" file with the following command: # grep -i "lcredit" /etc/security/pwquality.conf lcredit=-1 If the "lcredit" parameter is greater than "-1", or is commented out, this is a finding.

Fix: F-20897r304848_fix

Add or update the "/etc/security/pwquality.conf" file to contain the "lcredit" parameter: lcredit=-1

a
The Ubuntu operating system must enforce password complexity by requiring that at least one numeric character be used.
IA-5 - Low - CCI-000194 - V-219174 - SV-219174r982197_rule
RMF Control
IA-5
Severity
Low
CCI
CCI-000194
Version
UBTU-18-010102
Vuln IDs
  • V-219174
  • V-100575
Rule IDs
  • SV-219174r982197_rule
  • SV-109679
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.
Checks: C-20899r304850_chk

Verify the Ubuntu operating system enforces password complexity by requiring that at least one numeric character be used. Determine if the field "dcredit" is set in the "/etc/security/pwquality.conf" file with the following command: # grep -i "dcredit" /etc/security/pwquality.conf dcredit=-1 If the "dcredit" parameter is greater than "-1", or is commented out, this is a finding.

Fix: F-20898r304851_fix

Configure the Ubuntu operating system to enforce password complexity by requiring that at least one numeric character be used. Add or update the "/etc/security/pwquality.conf" file to contain the "dcredit" parameter: dcredit=-1

a
The Ubuntu operating system must require the change of at least 8 characters when passwords are changed.
IA-5 - Low - CCI-000195 - V-219175 - SV-219175r982198_rule
RMF Control
IA-5
Severity
Low
CCI
CCI-000195
Version
UBTU-18-010103
Vuln IDs
  • V-219175
  • V-100577
Rule IDs
  • SV-219175r982198_rule
  • SV-109681
If the Ubuntu operating system allows the user to consecutively reuse extensive portions of passwords, this increases the chances of password compromise by increasing the window of opportunity for attempts at guessing and brute-force attacks. The number of changed characters refers to the number of changes required with respect to the total number of positions in the current password. In other words, characters may be the same within the two passwords; however, the positions of the like characters must be different. If the password length is an odd number then number of changed characters must be rounded up. For example, a password length of 15 characters must require the change of at least 8 characters.
Checks: C-20900r304853_chk

Verify the Ubuntu operating system requires the change of at least 8 characters when passwords are changed. Determine if the field "difok" is set in the "/etc/security/pwquality.conf" file with the following command: # grep -i "difok" /etc/security/pwquality.conf difok=8 If the "difok" parameter is less than "8", or is commented out, this is a finding.

Fix: F-20899r304854_fix

Configure the Ubuntu operating system to require the change of at least 8 characters when passwords are changed. Add or update the "/etc/security/pwquality.conf" file to include the "difok=8" parameter: difok=8

b
The Ubuntu operating system must encrypt all stored passwords with a FIPS 140-2 approved cryptographic hashing algorithm.
IA-5 - Medium - CCI-000196 - V-219176 - SV-219176r982199_rule
RMF Control
IA-5
Severity
Medium
CCI
CCI-000196
Version
UBTU-18-010104
Vuln IDs
  • V-219176
  • V-100579
Rule IDs
  • SV-219176r982199_rule
  • SV-109683
Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised.
Checks: C-20901r304856_chk

Verify that the shadow password suite configuration is set to encrypt password with a FIPS 140-2 approved cryptographic hashing algorithm. Check the hashing algorithm that is being used to hash passwords with the following command: # cat /etc/login.defs | grep -i crypt ENCRYPT_METHOD SHA512 If "ENCRYPT_METHOD" does not equal SHA512 or greater, this is a finding.

Fix: F-20900r304857_fix

Configure the Ubuntu operating system to encrypt all stored passwords. Edit/Modify the following line in the "/etc/login.defs" file and set "ENCRYPT_METHOD" to SHA512. ENCRYPT_METHOD SHA512

c
The Ubuntu operating system must not have the telnet package installed.
IA-5 - High - CCI-000197 - V-219177 - SV-219177r987796_rule
RMF Control
IA-5
Severity
High
CCI
CCI-000197
Version
UBTU-18-010105
Vuln IDs
  • V-219177
  • V-100581
Rule IDs
  • SV-219177r987796_rule
  • SV-109685
Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised.
Checks: C-20902r304859_chk

Verify that the telnet package is not installed on the Ubuntu operating system. Check that the telnet daemon is not installed on the Ubuntu operating system by running the following command: # dpkg -l | grep telnetd If the package is installed, this is a finding.

Fix: F-20901r304860_fix

Remove the telnet package from the Ubuntu operating system by running the following command: # sudo apt-get remove telnetd

a
The Ubuntu operating system must enforce 24 hours/1 day as the minimum password lifetime. Passwords for new users must have a 24 hours/1 day minimum password lifetime restriction.
IA-5 - Low - CCI-000198 - V-219178 - SV-219178r982188_rule
RMF Control
IA-5
Severity
Low
CCI
CCI-000198
Version
UBTU-18-010106
Vuln IDs
  • V-219178
  • V-100583
Rule IDs
  • SV-219178r982188_rule
  • SV-109687
Enforcing a minimum password lifetime helps to prevent repeated password changes to defeat the password reuse or history enforcement requirement. If users are allowed to immediately and continually change their password, then the password could be repeatedly changed in a short period of time to defeat the organization's policy regarding password reuse.
Checks: C-20903r304862_chk

Verify that the Ubuntu operating system enforces a 24 hours/1 day minimum password lifetime for new user accounts by running the following command: # grep -i pass_min_days /etc/login.defs PASS_MIN_DAYS 1 If the "PASS_MIN_DAYS" parameter value is less than 1, or commented out, this is a finding.

Fix: F-20902r304863_fix

Configure the Ubuntu operating system to enforce a 24 hours/1 day minimum password lifetime. Add, or modify the following line in the "/etc/login.defs" file: PASS_MIN_DAYS 1

a
The Ubuntu operating system must enforce a 60-day maximum password lifetime restriction. Passwords for new users must have a 60-day maximum password lifetime restriction.
IA-5 - Low - CCI-000199 - V-219179 - SV-219179r982200_rule
RMF Control
IA-5
Severity
Low
CCI
CCI-000199
Version
UBTU-18-010107
Vuln IDs
  • V-219179
  • V-100585
Rule IDs
  • SV-219179r982200_rule
  • SV-109689
Any password, no matter how complex, can eventually be cracked. Therefore, passwords need to be changed periodically. If the operating system does not limit the lifetime of passwords and force users to change their passwords, there is the risk that the operating system passwords could be compromised.
Checks: C-20904r304865_chk

Verify that the Ubuntu operating system enforces a 60-day maximum password lifetime for new user accounts by running the following command: # grep -i pass_max_days /etc/login.defs PASS_MAX_DAYS 60 If the "PASS_MAX_DAYS" parameter value is less than 60, or commented out, this is a finding.

Fix: F-20903r304866_fix

Configure the Ubuntu operating system to enforce a 60-day maximum password lifetime. Add, or modify the following line in the "/etc/login.defs" file: PASS_MAX_DAYS 60

a
The Ubuntu operating system must prohibit password reuse for a minimum of five generations.
IA-5 - Low - CCI-000200 - V-219180 - SV-219180r982201_rule
RMF Control
IA-5
Severity
Low
CCI
CCI-000200
Version
UBTU-18-010108
Vuln IDs
  • V-219180
  • V-100587
Rule IDs
  • SV-219180r982201_rule
  • SV-109691
Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. If the information system or application allows the user to consecutively reuse their password when that password has exceeded its defined lifetime, the end result is a password that is not changed as per policy requirements.
Checks: C-20905r304868_chk

Verify that the Ubuntu operating system prevents passwords from being reused for a minimum of five generations by running the following command: # grep -i remember /etc/pam.d/common-password password [success=1 default=ignore] pam_unix.so sha512 shadow remember=5 rounds=5000 If the "remember" parameter value is not greater than or equal to 5, commented out, or not set at all this is a finding.

Fix: F-20904r304869_fix

Configure the Ubuntu operating system prevents passwords from being reused for a minimum of five generations. Add, or modify the "remember" parameter value to the following line in "/etc/pam.d/common-password" file: password [success=1 default=ignore] pam_unix.so sha512 shadow remember=5 rounds=5000

b
The Ubuntu operating system must enforce a minimum 15-character password length.
IA-5 - Medium - CCI-000205 - V-219181 - SV-219181r982202_rule
RMF Control
IA-5
Severity
Medium
CCI
CCI-000205
Version
UBTU-18-010109
Vuln IDs
  • V-219181
  • V-100589
Rule IDs
  • SV-219181r982202_rule
  • SV-109693
The shorter the password, the lower the number of possible combinations that need to be tested before the password is compromised. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password length is one factor of several that helps to determine strength and how long it takes to crack a password. Use of more characters in a password helps to exponentially increase the time and/or resources required to compromise the password.
Checks: C-20906r304871_chk

Verify if the pwquality configuration file enforces a minimum 15-character password length, by running the following command: # grep -i minlen /etc/security/pwquality.conf minlen=15 If "minlen" parameter value is not 15 or higher, or is commented out, this is a finding.

Fix: F-20905r304872_fix

Configure the Ubuntu operating system to enforce a minimum 15-character password length. Add, or modify the "minlen" parameter value to the "/etc/security/pwquality.conf" file: minlen=15

b
The Ubuntu operating system must employ a FIPS 140-2 approved cryptographic hashing algorithms for all created and stored passwords.
IA-7 - Medium - CCI-000803 - V-219182 - SV-219182r971535_rule
RMF Control
IA-7
Severity
Medium
CCI
CCI-000803
Version
UBTU-18-010110
Vuln IDs
  • V-219182
  • V-100591
Rule IDs
  • SV-219182r971535_rule
  • SV-109695
The Ubuntu operating system must use a FIPS-compliant hashing algorithm to securely store the password. The FIPS-compliant hashing algorithm parameters must be selected in order to harden the system against offline attacks.
Checks: C-20907r304874_chk

Verify that encrypted passwords stored in /etc/shadow use a strong cryptographic hash. Check that pam_unix.so auth is configured to use sha512 with the following command: # grep password /etc/pam.d/common-password | grep pam_unix password [success=1 default=ignore] pam_unix.so obscure sha512 If "sha512" is not an option of the output, or is commented out, this is a finding. Check that ENCRYPT_METHOD is set to sha512 in /etc/login.defs: # grep -i ENCRYPT_METHOD /etc/login.defs ENCRYPT_METHOD SHA512 If the output does not contain "sha512", or it is commented out, this is a finding.

Fix: F-20906r304875_fix

Configure the Ubuntu operating system to encrypt all stored passwords with a strong cryptographic hash. Edit/modify the following line in the file "/etc/pam.d/common-password" file to include the sha512 option for pam_unix.so: password [success=1 default=ignore] pam_unix.so obscure sha512 Edit/modify /etc/login.defs and set "ENCRYPT_METHOD sha512".

b
The Ubuntu operating system must allow the use of a temporary password for system logons with an immediate change to a permanent password.
IA-5 - Medium - CCI-002041 - V-219183 - SV-219183r982193_rule
RMF Control
IA-5
Severity
Medium
CCI
CCI-002041
Version
UBTU-18-010112
Vuln IDs
  • V-219183
  • V-100593
Rule IDs
  • SV-219183r982193_rule
  • SV-109697
Without providing this capability, an account may be created without a password. Non-repudiation cannot be guaranteed once an account is created if a user is not forced to change the temporary password upon initial logon. Temporary passwords are typically used to allow access when new accounts are created or passwords are changed. It is common practice for administrators to create temporary passwords for user accounts which allow the users to log on, yet force them to change the password once they have successfully authenticated.
Checks: C-20908r304877_chk

Verify a policy exists that ensures when a user account is created, it is created using a method that forces a user to change their password upon their next login. If a policy does not exist, this is a finding.

Fix: F-20907r304878_fix

Create a policy that ensures when a user is created, it is created using a method that forces a user to change their password upon their next login. Below are two examples of how to create a user account that requires the user to change their password upon their next login. # chage -d 0 [UserName] or # passwd -e [UserName]

b
The Ubuntu operating system must prevent the use of dictionary words for passwords.
CM-6 - Medium - CCI-000366 - V-219184 - SV-219184r991587_rule
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
UBTU-18-010113
Vuln IDs
  • V-219184
  • V-100595
Rule IDs
  • SV-219184r991587_rule
  • SV-109699
If the Ubuntu operating system allows the user to select passwords based on dictionary words, then this increases the chances of password compromise by increasing the opportunity for successful guesses and brute-force attacks.
Checks: C-20909r304880_chk

Verify that the Ubuntu operating system uses the cracklib library to prevent the use of dictionary words with the following command: # grep dictcheck /etc/security/pwquality.conf dictcheck=1 If the "dictcheck" parameter is not set to "1", or is commented out, this is a finding.

Fix: F-20908r304881_fix

Configure the Ubuntu operating system to prevent the use of dictionary words for passwords. Add or update the following line in the "/etc/security/pwquality.conf" file to include the "dictcheck=1" parameter: dictcheck=1

b
The Ubuntu operating system must require users to re-authenticate for privilege escalation and changing roles.
IA-11 - Medium - CCI-002038 - V-219185 - SV-219185r987879_rule
RMF Control
IA-11
Severity
Medium
CCI
CCI-002038
Version
UBTU-18-010114
Vuln IDs
  • V-219185
  • V-100597
Rule IDs
  • SV-219185r987879_rule
  • SV-109701
Without re-authentication, users may access resources or perform tasks for which they do not have authorization. When the Ubuntu operating system provides the capability to escalate a functional capability or change security roles, it is critical the user re-authenticate. Satisfies: SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157
Checks: C-20910r304883_chk

Verify that "/etc/sudoers" has no occurrences of "NOPASSWD" or "!authenticate". Check that the "/etc/sudoers" file has no occurrences of "NOPASSWD" or "!authenticate" by running the following command: # sudo egrep -i '(nopasswd|!authenticate)' /etc/sudoers /etc/sudoers.d/* If any occurrences of "NOPASSWD" or "!authenticate" return from the command, this is a finding.

Fix: F-20909r304884_fix

Remove any occurrence of "NOPASSWD" or "!authenticate" found in "/etc/sudoers" file or files in the /etc/sudoers.d directory.

b
The Ubuntu Operating system must be configured so that when passwords are changed or new passwords are established, pwquality must be used.
CM-6 - Medium - CCI-000366 - V-219186 - SV-219186r991587_rule
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
UBTU-18-010116
Vuln IDs
  • V-219186
  • V-100599
Rule IDs
  • SV-219186r991587_rule
  • SV-109703
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. "pwquality" enforces complex password construction configuration and has the ability to limit brute-force attacks on the system.
Checks: C-20911r569487_chk

Verify the Ubuntu operating system has the libpam-pwquality package installed, by running the following command: # dpkg -l libpam-pwquality ii libpam-pwquality:amd64 1.4.0-2 amd64 PAM module to check password strength If "libpam-pwquality" is not installed, this is a finding. Verify the operating system uses "pwquality" to enforce the password complexity rules. Verify the pwquality module is being enforced by the Ubuntu Operating System, by running the following command: # grep -i enforcing /etc/security/pwquality.conf enforcing = 1 If the value of "enforcing" is not 1 or the line is commented out, this is a finding. Check for the use of "pwquality" with the following command: # sudo cat /etc/pam.d/common-password | grep requisite | grep pam_pwquality password requisite pam_pwquality.so retry=3 enforce_for_root If no output is returned or the line is commented out, this is a finding. If the value of "retry" is set to "0" or greater than "3", this is a finding. If "enforce_for_root" is missing from the configuration line, this is a finding.

Fix: F-20910r569488_fix

Configure the operating system to use "pwquality" to enforce password complexity rules. Install the pam_pwquality package by using the following command: # apt-get install libpam-pwquality -y Add the following line to "/etc/security/pwquality.conf" (or modify the line to have the required value): enforcing = 1 Add the following line to "/etc/pam.d/common-password" (or modify the line to have the required value): password requisite pam_pwquality.so retry=3 enforce_for_root Note: The value of "retry" should be between "1" and "3".

b
The Ubuntu operating system must set a sticky bit on all public directories to prevent unauthorized and unintended information transferred via shared system resources.
SC-4 - Medium - CCI-001090 - V-219187 - SV-219187r958524_rule
RMF Control
SC-4
Severity
Medium
CCI
CCI-001090
Version
UBTU-18-010120
Vuln IDs
  • V-219187
  • V-100601
Rule IDs
  • SV-219187r958524_rule
  • SV-109705
Preventing unauthorized information transfers mitigates the risk of information, including encrypted representations of information, produced by the actions of prior users/roles (or the actions of processes acting on behalf of prior users/roles) from being available to any current users/roles (or current processes) that obtain access to shared system resources (e.g., registers, main memory, hard disks) after those resources have been released back to information systems. The control of information in shared resources is also commonly referred to as object reuse and residual information protection. This requirement generally applies to the design of an information technology product, but it can also apply to the configuration of particular information system components that are, or use, such products. This can be verified by acceptance/validation processes in DoD or other government agencies. There may be shared resources with configurable protections (e.g., files in storage) that may be assessed on specific information system components.
Checks: C-20912r304889_chk

Verify that all public (world writeable) directories have the public sticky bit set. Find world-writable directories that lack the sticky bit by running the following command: # sudo find / -type d -perm -002 ! -perm -1000 If any world-writable directories are found missing the sticky bit, this is a finding.

Fix: F-20911r304890_fix

Configure all public directories to have the sticky bit set to prevent unauthorized and unintended information transferred via shared system resources. Set the sticky bit on all public directories using the command, replace "[Public Directory]" with any directory path missing the sticky bit: # sudo chmod +t [Public Directory]

b
The Ubuntu operating system must generate error messages that provide information necessary for corrective actions without revealing information that could be exploited by adversaries.
SI-11 - Medium - CCI-001312 - V-219188 - SV-219188r958564_rule
RMF Control
SI-11
Severity
Medium
CCI
CCI-001312
Version
UBTU-18-010121
Vuln IDs
  • V-219188
  • V-100603
Rule IDs
  • SV-219188r958564_rule
  • SV-109707
Any operating system providing too much information in error messages risks compromising the data and security of the structure, and content of error messages needs to be carefully considered by the organization. Organizations carefully consider the structure/content of error messages. The extent to which information systems are able to identify and handle error conditions is guided by organizational policy and operational requirements. Information that could be exploited by adversaries includes, for example, erroneous logon attempts with passwords entered by mistake as the username, mission/business information that can be derived from (if not stated explicitly by) information recorded, and personal information, such as account numbers, social security numbers, and credit card numbers. The /var/log/btmp, /var/log/wtmp, and /var/log/lastlog files have group write and global read permissions to allow for the lastlog function to perform. Limiting the permissions beyond this configuration will result in the failure of functions that rely on the lastlog database.
Checks: C-20913r880863_chk

Verify the Ubuntu operating system has all system log files under the /var/log directory with a permission set to "640", by using the following command: Note: The btmp, wtmp, and lastlog files are excluded. Refer to the Discussion for details. $ sudo find /var/log -perm /137 ! -name '*[bw]tmp' ! -name '*lastlog' -type f -exec stat -c "%n %a" {} \; If the command displays any output, this is a finding.

Fix: F-20912r880864_fix

Configured the Ubuntu operating system to set permissions of all log files under /var/log directory to "640" or more restricted, by using the following command: Note: The btmp, wtmp, and lastlog files are excluded. Refer to the Discussion for details. $ sudo find /var/log -perm /137 ! -name '*[bw]tmp' ! -name '*lastlog' -type f -exec chmod 640 '{}' \;

b
The Ubuntu operating system must configure the /var/log directory to be group-owned by syslog.
SI-11 - Medium - CCI-001314 - V-219189 - SV-219189r958566_rule
RMF Control
SI-11
Severity
Medium
CCI
CCI-001314
Version
UBTU-18-010122
Vuln IDs
  • V-219189
  • V-100605
Rule IDs
  • SV-219189r958566_rule
  • SV-109709
Only authorized personnel should be aware of errors and the details of the errors. Error messages are an indicator of an organization's operational state or can identify the operating system or platform. Additionally, Personally Identifiable Information (PII) and operational information must not be revealed through error messages to unauthorized personnel or their designated representatives. The structure and content of error messages must be carefully considered by the organization and development team. The extent to which the information system is able to identify and handle error conditions is guided by organizational policy and operational requirements.
Checks: C-20914r304895_chk

Verify the Ubuntu operating system configures the /var/log directory to be group-owned by syslog. Check that the /var/log directory is group owned by syslog with the following command: # sudo stat -c "%n %G" /var/log /var/log syslog If the /var/log directory is not group-owned by syslog, this is a finding.

Fix: F-20913r304896_fix

Configure the Ubuntu operating system to have syslog group-own the /var/log directory by running the following command: # sudo chgrp syslog /var/log

b
The Ubuntu operating system must configure the /var/log directory to be owned by root.
SI-11 - Medium - CCI-001314 - V-219190 - SV-219190r958566_rule
RMF Control
SI-11
Severity
Medium
CCI
CCI-001314
Version
UBTU-18-010123
Vuln IDs
  • V-219190
  • V-100607
Rule IDs
  • SV-219190r958566_rule
  • SV-109711
Only authorized personnel should be aware of errors and the details of the errors. Error messages are an indicator of an organization's operational state or can identify the operating system or platform. Additionally, Personally Identifiable Information (PII) and operational information must not be revealed through error messages to unauthorized personnel or their designated representatives. The structure and content of error messages must be carefully considered by the organization and development team. The extent to which the information system is able to identify and handle error conditions is guided by organizational policy and operational requirements.
Checks: C-20915r304898_chk

Verify the Ubuntu operating system configures the /var/log directory to be owned by root. Check that the /var/log directory is owned by root with the following command: # sudo stat -c "%n %U" /var/log /var/log root If the /var/log directory is not owned by root, this is a finding.

Fix: F-20914r304899_fix

Configure the Ubuntu operating system to have root own the /var/log directory by running the following command: # sudo chown root /var/log

b
The Ubuntu operating system must configure the /var/log directory to have mode 0755 or less permissive.
SI-11 - Medium - CCI-001314 - V-219191 - SV-219191r958566_rule
RMF Control
SI-11
Severity
Medium
CCI
CCI-001314
Version
UBTU-18-010124
Vuln IDs
  • V-219191
  • V-100609
Rule IDs
  • SV-219191r958566_rule
  • SV-109713
Only authorized personnel should be aware of errors and the details of the errors. Error messages are an indicator of an organization's operational state or can identify the operating system or platform. Additionally, personally identifiable information (PII) and operational information must not be revealed through error messages to unauthorized personnel or their designated representatives. The structure and content of error messages must be carefully considered by the organization and development team. The extent to which the information system is able to identify and handle error conditions is guided by organizational policy and operational requirements.
Checks: C-20916r880866_chk

Verify that the Ubuntu operating system configures the /var/log directory with a mode of "755" or less permissive. Check the mode of the /var/log directory with the following command: Note: If rsyslog is active and enabled on the operating system, this requirement is not applicable. $ stat -c "%n %a" /var/log /var/log 755 If a value of "755" or less permissive is not returned, this is a finding.

Fix: F-20915r880867_fix

Configure the Ubuntu operating system to have permissions of "0755" for the /var/log directory by running the following command: $ sudo chmod 0755 /var/log

b
The Ubuntu operating system must configure the /var/log/syslog file to be group-owned by adm.
SI-11 - Medium - CCI-001314 - V-219192 - SV-219192r958566_rule
RMF Control
SI-11
Severity
Medium
CCI
CCI-001314
Version
UBTU-18-010125
Vuln IDs
  • V-219192
  • V-100611
Rule IDs
  • SV-219192r958566_rule
  • SV-109715
Only authorized personnel should be aware of errors and the details of the errors. Error messages are an indicator of an organization's operational state or can identify the operating system or platform. Additionally, Personally Identifiable Information (PII) and operational information must not be revealed through error messages to unauthorized personnel or their designated representatives. The structure and content of error messages must be carefully considered by the organization and development team. The extent to which the information system is able to identify and handle error conditions is guided by organizational policy and operational requirements.
Checks: C-20917r304904_chk

Verify that the Ubuntu operating system configures the /var/log/syslog file to be group-owned by adm. Check that the /var/log/syslog file is group-owned by adm with the following command: # sudo stat -c "%n %G" /var/log/syslog /var/log/syslog adm If the /var/log/syslog file is not group-owned by adm, this is a finding.

Fix: F-20916r304905_fix

Configure the Ubuntu operating system to have adm group-own the /var/log/syslog file by running the following command: # sudo chgrp adm /var/log/syslog

b
The Ubuntu operating system must configure /var/log/syslog file to be owned by syslog.
SI-11 - Medium - CCI-001314 - V-219193 - SV-219193r958566_rule
RMF Control
SI-11
Severity
Medium
CCI
CCI-001314
Version
UBTU-18-010126
Vuln IDs
  • V-219193
  • V-100613
Rule IDs
  • SV-219193r958566_rule
  • SV-109717
Only authorized personnel should be aware of errors and the details of the errors. Error messages are an indicator of an organization's operational state or can identify the operating system or platform. Additionally, Personally Identifiable Information (PII) and operational information must not be revealed through error messages to unauthorized personnel or their designated representatives. The structure and content of error messages must be carefully considered by the organization and development team. The extent to which the information system is able to identify and handle error conditions is guided by organizational policy and operational requirements.
Checks: C-20918r304907_chk

Verify that the Ubuntu operating system configures the /var/log/syslog file to be owned by syslog. Check that the /var/log/syslog file is owned by syslog with the following command: # sudo stat -c "%n %U" /var/log/syslog /var/log/syslog syslog If the /var/log/syslog file is not owned by syslog, this is a finding.

Fix: F-20917r304908_fix

Configure the Ubuntu operating system to have syslog own the /var/log/syslog file by running the following command: # sudo chown syslog /var/log/syslog

b
The Ubuntu operating system must configure /var/log/syslog file with mode 0640 or less permissive.
SI-11 - Medium - CCI-001314 - V-219194 - SV-219194r958566_rule
RMF Control
SI-11
Severity
Medium
CCI
CCI-001314
Version
UBTU-18-010127
Vuln IDs
  • V-219194
  • V-100615
Rule IDs
  • SV-219194r958566_rule
  • SV-109719
Only authorized personnel should be aware of errors and the details of the errors. Error messages are an indicator of an organization's operational state or can identify the operating system or platform. Additionally, Personally Identifiable Information (PII) and operational information must not be revealed through error messages to unauthorized personnel or their designated representatives. The structure and content of error messages must be carefully considered by the organization and development team. The extent to which the information system is able to identify and handle error conditions is guided by organizational policy and operational requirements.
Checks: C-20919r304910_chk

Verify that the Ubuntu operating system configures the /var/log/syslog file with mode 0640 or less permissive. Check the /var/log/syslog permissions by running the following command: # stat -c "%n %a" /var/log/syslog /var/log/syslog 640 If a value of "640" or less permissive is not returned, this is a finding.

Fix: F-20918r304911_fix

Configure the Ubuntu operating system to have permissions of 0640 o for the /var/log/syslog file by running the following command: # sudo chmod 0640 /var/log/syslog

b
The Ubuntu operating system must configure audit tools with a mode of 0755 or less permissive.
AU-9 - Medium - CCI-001493 - V-219195 - SV-219195r991557_rule
RMF Control
AU-9
Severity
Medium
CCI
CCI-001493
Version
UBTU-18-010128
Vuln IDs
  • V-219195
  • V-100617
Rule IDs
  • SV-219195r991557_rule
  • SV-109721
Protecting audit information also includes identifying and protecting the tools used to view and manipulate log data. Therefore, protecting audit tools is necessary to prevent unauthorized operation on audit information. The Ubuntu operating system providing tools to interface with audit information will leverage user permissions and roles identifying the user accessing the tools and the corresponding rights the user enjoys in order to make access decisions regarding the access to audit tools. Audit tools include, but are not limited to, vendor-provided and open source audit tools needed to successfully view and manipulate audit information system activity and records. Audit tools include custom queries and report generators. Satisfies: SRG-OS-000256-GPOS-00097, SRG-OS-000257-GPOS-00098, SRG-OS-000258-GPOS-00099
Checks: C-20920r304913_chk

Verify the audit tools are protected from unauthorized access, deletion, or modification by checking the permissive mode. For each audit tool, /sbin/auditctl, /sbin/aureport, /sbin/ausearch, /sbin/autrace, /sbin/auditd, /sbin/audispd, /sbin/augenrules Check the permissions by running the following command: # stat -c "%n %a" /sbin/auditctl 755 /sbin/auditctl If any of the audit tools have a mode more permissive than 0755, this is a finding.

Fix: F-20919r304914_fix

Configure the audit tools on the Ubuntu operating system to be protected from unauthorized access by setting the correct permissive mode using the following command: # sudo chmod 0755 [audit_tool] Replace "[audit_tool]" with the audit tool that does not have the correct permissive mode.

b
The Ubuntu operating system must configure audit tools to be owned by root.
AU-9 - Medium - CCI-001493 - V-219196 - SV-219196r991557_rule
RMF Control
AU-9
Severity
Medium
CCI
CCI-001493
Version
UBTU-18-010129
Vuln IDs
  • V-219196
  • V-100619
Rule IDs
  • SV-219196r991557_rule
  • SV-109723
Protecting audit information also includes identifying and protecting the tools used to view and manipulate log data. Therefore, protecting audit tools is necessary to prevent unauthorized operation on audit information. The Ubuntu operating system providing tools to interface with audit information will leverage user permissions and roles identifying the user accessing the tools and the corresponding rights the user enjoys in order to make access decisions regarding the access to audit tools. Audit tools include, but are not limited to, vendor-provided and open source audit tools needed to successfully view and manipulate audit information system activity and records. Audit tools include custom queries and report generators.
Checks: C-20921r304916_chk

Verify the Ubuntu operating system configures the audit tools to be owned by root to prevent any unauthorized access, deletion, or modification. For each audit tool, /sbin/auditctl, /sbin/aureport, /sbin/ausearch, /sbin/autrace, /sbin/auditd, /sbin/audispd, /sbin/augenrules Check the ownership by running the following command: # stat -c "%n %U" /sbin/auditctl /sbin/auditctl root If any of the audit tools are not owned by root, this is a finding.

Fix: F-20920r304917_fix

Configure the audit tools on the Ubuntu operating system to be owned by root, by running the following command: # sudo chown root [audit_tool] Replace "[audit_tool]" with each audit tool not owned by root.

b
The Ubuntu operating system must configure the audit tools to be group-owned by root.
AU-9 - Medium - CCI-001493 - V-219197 - SV-219197r991557_rule
RMF Control
AU-9
Severity
Medium
CCI
CCI-001493
Version
UBTU-18-010130
Vuln IDs
  • V-219197
  • V-100621
Rule IDs
  • SV-219197r991557_rule
  • SV-109725
Protecting audit information also includes identifying and protecting the tools used to view and manipulate log data. Therefore, protecting audit tools is necessary to prevent unauthorized operation on audit information. The Ubuntu operating system providing tools to interface with audit information will leverage user permissions and roles identifying the user accessing the tools and the corresponding rights the user enjoys in order to make access decisions regarding the access to audit tools. Audit tools include, but are not limited to, vendor-provided and open source audit tools needed to successfully view and manipulate audit information system activity and records. Audit tools include custom queries and report generators.
Checks: C-20922r304919_chk

Verify the Ubuntu operating system configures the audit tools to be group-owned by root to prevent any unauthorized access, deletion, or modification. For each audit tools, /sbin/auditctl, /sbin/aureport, /sbin/ausearch, /sbin/autrace, /sbin/auditd, /sbin/audispd, /sbin/augenrules Check the group-owner of each audit tool by running the following commands: stat -c "%n %G" /sbin/auditctl /sbin/auditctl root If any of the audit tools are not group-owned by root, this is a finding.

Fix: F-20921r304920_fix

Configure the audit tools on the Ubuntu operating system to be group-owned by root, by running the following command: # sudo chgrp root [audit_tool] Replace "[audit_tool]" with each audit tool not group-owned by root.

b
The Ubuntu operating system library files must have mode 0755 or less permissive.
CM-5 - Medium - CCI-001499 - V-219198 - SV-219198r991560_rule
RMF Control
CM-5
Severity
Medium
CCI
CCI-001499
Version
UBTU-18-010133
Vuln IDs
  • V-219198
  • V-100623
Rule IDs
  • SV-219198r991560_rule
  • SV-109727
If the operating system were to allow any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process. This requirement applies to operating systems with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs which execute with escalated privileges. Only qualified and authorized individuals must be allowed to obtain access to information system components for purposes of initiating changes, including upgrades and modifications.
Checks: C-20923r802356_chk

Verify the system-wide shared library files contained in the directories "/lib", "/lib64" and "/usr/lib" have mode 0755 or less permissive. Check that the system-wide shared library files have mode 0755 or less permissive with the following command: $ sudo find /lib /lib64 /usr/lib -perm /022 -type f -exec stat -c "%n %a" '{}' \; /usr/lib64/pkcs11-spy.so If any library files are found to be group-writable or world-writable, this is a finding.

Fix: F-20922r802357_fix

Configure the library files to be protected from unauthorized access. Run the following command: $ sudo find /lib /lib64 /usr/lib -perm /022 -type f -iname *.so* -exec chmod 755 '{}' \

b
The Ubuntu operating system library directories must have mode 0755 or less permissive.
CM-5 - Medium - CCI-001499 - V-219199 - SV-219199r991560_rule
RMF Control
CM-5
Severity
Medium
CCI
CCI-001499
Version
UBTU-18-010134
Vuln IDs
  • V-219199
  • V-100625
Rule IDs
  • SV-219199r991560_rule
  • SV-109729
If the Ubuntu operating system were to allow any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process. This requirement applies to Ubuntu operating systems with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs which execute with escalated privileges. Only qualified and authorized individuals must be allowed to obtain access to information system components for purposes of initiating changes, including upgrades and modifications.
Checks: C-20924r569465_chk

Verify the system-wide shared library directories "/lib", "/lib64" and "/usr/lib have mode 0755 or less permissive. Check that the system-wide shared library directories have mode 0755 or less permissive with the following command: # sudo find /lib /lib64 /usr/lib -perm /022 -type d -exec stat -c "%n %a" '{}' \; If any of the aforementioned directories are found to be group-writable or world-writable, this is a finding.

Fix: F-20923r569490_fix

Configure the shared library directories to be protected from unauthorized access. Run the following command: # sudo find /lib /lib64 /usr/lib -perm /022 -type d -exec chmod 755 '{}' \;

b
The Ubuntu operating system library files must be owned by root.
CM-5 - Medium - CCI-001499 - V-219200 - SV-219200r991560_rule
RMF Control
CM-5
Severity
Medium
CCI
CCI-001499
Version
UBTU-18-010135
Vuln IDs
  • V-219200
  • V-100627
Rule IDs
  • SV-219200r991560_rule
  • SV-109731
If the Ubuntu operating system were to allow any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process. This requirement applies to Ubuntu operating systems with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs which execute with escalated privileges. Only qualified and authorized individuals must be allowed to obtain access to information system components for purposes of initiating changes, including upgrades and modifications.
Checks: C-20925r304928_chk

Verify the system-wide shared library files contained in the directories "/lib", "/lib64" and "/usr/lib" are owned by root. Check that the system-wide shared library files are owned by root with the following command: # sudo find /lib /usr/lib /lib64 ! -user root -type f -exec stat -c "%n %U" '{}' \; If any system wide library file is returned, this is a finding.

Fix: F-20924r304929_fix

Configure the system library files to be protected from unauthorized access. Run the following command: # sudo find /lib /usr/lib /lib64 ! -user root -type f -exec chown root '{}' \;

b
The Ubuntu operating system library directories must be owned by root.
CM-5 - Medium - CCI-001499 - V-219201 - SV-219201r991560_rule
RMF Control
CM-5
Severity
Medium
CCI
CCI-001499
Version
UBTU-18-010136
Vuln IDs
  • V-219201
  • V-100629
Rule IDs
  • SV-219201r991560_rule
  • SV-109733
If the Ubuntu operating system were to allow any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process. This requirement applies to Ubuntu operating systems with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs which execute with escalated privileges. Only qualified and authorized individuals must be allowed to obtain access to information system components for purposes of initiating changes, including upgrades and modifications.
Checks: C-20926r304931_chk

Verify the system-wide shared library directories "/lib", "/lib64" and "/usr/lib" are owned by root. Check that the system-wide shared library directories are owned by root with the following command: # sudo find /lib /usr/lib /lib64 ! -user root -type d -exec stat -c "%n %U" '{}' \; If any system wide library directory is returned, this is a finding.

Fix: F-20925r304932_fix

Configure the library files and their respective parent directories to be protected from unauthorized access. Run the following command: # sudo find /lib /usr/lib /lib64 ! -user root -type d -exec chown root '{}' \;

b
The Ubuntu operating system library files must be group-owned by root.
CM-5 - Medium - CCI-001499 - V-219202 - SV-219202r991560_rule
RMF Control
CM-5
Severity
Medium
CCI
CCI-001499
Version
UBTU-18-010137
Vuln IDs
  • V-219202
  • V-100631
Rule IDs
  • SV-219202r991560_rule
  • SV-109735
If the Ubuntu operating system were to allow any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process. This requirement applies to Ubuntu operating systems with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs which execute with escalated privileges. Only qualified and authorized individuals must be allowed to obtain access to information system components for purposes of initiating changes, including upgrades and modifications.
Checks: C-20927r802359_chk

Verify the system-wide library files contained in the directories "/lib", "/lib64" and "/usr/lib" are group-owned by root. Check that the system-wide library files are group-owned by root with the following command: $ sudo find /lib /usr/lib /lib64 ! -group root -type f -exec stat -c "%n %G" '{}' \; If any system wide shared library file is returned, this is a finding.

Fix: F-20926r802360_fix

Configure the system library files to be protected from unauthorized access. Run the following command: $ sudo find /lib /usr/lib /lib64 ! -group root -type f -iname *.so* -exec chgrp root '{}' \;

b
The Ubuntu operating system library directories must be group-owned by root.
CM-5 - Medium - CCI-001499 - V-219203 - SV-219203r991560_rule
RMF Control
CM-5
Severity
Medium
CCI
CCI-001499
Version
UBTU-18-010138
Vuln IDs
  • V-219203
  • V-100633
Rule IDs
  • SV-219203r991560_rule
  • SV-109737
If the Ubuntu operating system were to allow any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process. This requirement applies to Ubuntu operating systems with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs which execute with escalated privileges. Only qualified and authorized individuals must be allowed to obtain access to information system components for purposes of initiating changes, including upgrades and modifications.
Checks: C-20928r304937_chk

Verify the system-wide library directories "/lib", "/lib64" and "/usr/lib" are group-owned by root. Check that the system-wide library directories are group-owned by root with the following command: # sudo find /lib /usr/lib /lib64 ! -group root -type d -exec stat -c "%n %G" '{}' \; If any system wide shared library directory is returned, this is a finding.

Fix: F-20927r304938_fix

Configure the system library directories to be protected from unauthorized access. Run the following command: # sudo find /lib /usr/lib /lib64 ! -group root -type d -exec chgrp root '{}' \;

b
The Ubuntu operating system must have system commands set to a mode of 0755 or less permissive.
CM-5 - Medium - CCI-001499 - V-219204 - SV-219204r991560_rule
RMF Control
CM-5
Severity
Medium
CCI
CCI-001499
Version
UBTU-18-010139
Vuln IDs
  • V-219204
  • V-100635
Rule IDs
  • SV-219204r991560_rule
  • SV-109739
If the Ubuntu operating system were to allow any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process. This requirement applies to Ubuntu operating systems with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs which execute with escalated privileges. Only qualified and authorized individuals must be allowed to obtain access to information system components for purposes of initiating changes, including upgrades and modifications.
Checks: C-20929r304940_chk

Verify the system commands contained in the following directories have mode 0755 or less permissive: /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin Check that the system command files have mode 0755 or less permissive with the following command: # find -L /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin -perm /022 -type f -exec stat -c "%n %a" '{}' \; If any files are found to be group-writable or world-writable, this is a finding.

Fix: F-20928r304941_fix

Configure the system commands to be protected from unauthorized access. Run the following command: # sudo find -L /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin -perm /022 -type f -exec chmod 755 '{}' \;

b
The Ubuntu operating system must have directories that contain system commands set to a mode of 0755 or less permissive.
CM-5 - Medium - CCI-001499 - V-219205 - SV-219205r991560_rule
RMF Control
CM-5
Severity
Medium
CCI
CCI-001499
Version
UBTU-18-010140
Vuln IDs
  • V-219205
  • V-100637
Rule IDs
  • SV-219205r991560_rule
  • SV-109741
If the Ubuntu operating system were to allow any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process. This requirement applies to Ubuntu operating systems with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs which execute with escalated privileges. Only qualified and authorized individuals must be allowed to obtain access to information system components for purposes of initiating changes, including upgrades and modifications.
Checks: C-20930r304943_chk

Verify the system commands directories have mode 0755 or less permissive: /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin Check that the system command directories have mode 0755 or less permissive with the following command: # find -L /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin -perm /022 -type d -exec stat -c "%n %a" '{}' \; If any directories are found to be group-writable or world-writable, this is a finding.

Fix: F-20929r304944_fix

Configure the system commands directories to be protected from unauthorized access. Run the following command: # sudo find -L /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin -perm /022 -type d -exec chmod -R 755 '{}' \;

b
The Ubuntu operating system must have system commands owned by root.
CM-5 - Medium - CCI-001499 - V-219206 - SV-219206r991560_rule
RMF Control
CM-5
Severity
Medium
CCI
CCI-001499
Version
UBTU-18-010141
Vuln IDs
  • V-219206
  • V-100639
Rule IDs
  • SV-219206r991560_rule
  • SV-109743
If the Ubuntu operating system were to allow any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process. This requirement applies to Ubuntu operating systems with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs which execute with escalated privileges. Only qualified and authorized individuals must be allowed to obtain access to information system components for purposes of initiating changes, including upgrades and modifications.
Checks: C-20931r304946_chk

Verify the system commands contained in the following directories are owned by root: /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin Use the following command for the check: # sudo find -L /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin ! -user root -type f -exec stat -c "%n %U" '{}' \; If any system commands are returned, this is a finding.

Fix: F-20930r304947_fix

Configure the system commands - and their respective parent directories - to be protected from unauthorized access. Run the following command: # sudo find -L /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin ! -user root -type f -exec chown root '{}' \;

b
The Ubuntu operating system must have directories that contain system commands owned by root.
CM-5 - Medium - CCI-001499 - V-219207 - SV-219207r991560_rule
RMF Control
CM-5
Severity
Medium
CCI
CCI-001499
Version
UBTU-18-010142
Vuln IDs
  • V-219207
  • V-100641
Rule IDs
  • SV-219207r991560_rule
  • SV-109745
If the Ubuntu operating system were to allow any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process. This requirement applies to Ubuntu operating systems with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs which execute with escalated privileges. Only qualified and authorized individuals must be allowed to obtain access to information system components for purposes of initiating changes, including upgrades and modifications.
Checks: C-20932r304949_chk

Verify the system commands directories are owned by root: /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin Use the following command for the check: # sudo find -L /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin ! -user root -type d -exec stat -c "%n %U" '{}' \; If any system commands directories are returned, this is a finding.

Fix: F-20931r304950_fix

Configure the system commands directories to be protected from unauthorized access. Run the following command: # sudo find -L /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin ! -user root -type d -exec chown root '{}' \;

b
The Ubuntu operating system must have system commands group-owned by root or a system account.
CM-5 - Medium - CCI-001499 - V-219208 - SV-219208r991560_rule
RMF Control
CM-5
Severity
Medium
CCI
CCI-001499
Version
UBTU-18-010143
Vuln IDs
  • V-219208
  • V-100643
Rule IDs
  • SV-219208r991560_rule
  • SV-109747
If the Ubuntu operating system were to allow any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process. This requirement applies to Ubuntu operating systems with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs which execute with escalated privileges. Only qualified and authorized individuals must be allowed to obtain access to information system components for purposes of initiating changes, including upgrades and modifications.
Checks: C-20933r832923_chk

Verify the system commands contained in the following directories are group-owned by root or a system account: /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin Run the check with the following command: $ sudo find -L /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin ! -group root -type f -exec stat -c "%n %G" '{}' \; If any system commands are returned that are not Set Group ID up on execution (SGID) files and group-owned by a required system account, this is a finding.

Fix: F-20932r832924_fix

Configure the system commands to be protected from unauthorized access. Run the following command, replacing "[FILE]" with any system command file not group-owned by "root" or a required system account. $ sudo chgrp root [FILE]

b
The Ubuntu operating system must have directories that contain system commands group-owned by root.
CM-5 - Medium - CCI-001499 - V-219209 - SV-219209r991560_rule
RMF Control
CM-5
Severity
Medium
CCI
CCI-001499
Version
UBTU-18-010144
Vuln IDs
  • V-219209
  • V-100645
Rule IDs
  • SV-219209r991560_rule
  • SV-109749
If the Ubuntu operating system were to allow any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process. This requirement applies to Ubuntu operating systems with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs which execute with escalated privileges. Only qualified and authorized individuals must be allowed to obtain access to information system components for purposes of initiating changes, including upgrades and modifications.
Checks: C-20934r304955_chk

Verify the system commands directories are group-owned by root: /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin Run the check with the following command: # sudo find -L /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin ! -group root -type d -exec stat -c "%n %G" '{}' \; If any system commands directories are returned that are not Set Group ID up on execution (SGID) files and owned by a privileged account, this is a finding.

Fix: F-20933r304956_fix

Configure the system commands directories to be protected from unauthorized access. Run the following command: # sudo find -L /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin ! -group root -type d -exec chgrp root '{}' \;

a
The Ubuntu operating system must enforce password complexity by requiring that at least one special character be used.
IA-5 - Low - CCI-001619 - V-219210 - SV-219210r991561_rule
RMF Control
IA-5
Severity
Low
CCI
CCI-001619
Version
UBTU-18-010145
Vuln IDs
  • V-219210
  • V-100647
Rule IDs
  • SV-219210r991561_rule
  • SV-109751
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity or strength is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password complexity is one factor in determining how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised. Special characters are those characters that are not alphanumeric. Examples include: ~ ! @ # $ % ^ *.
Checks: C-20935r304958_chk

Determine if the field "ocredit" is set in the "/etc/security/pwquality.conf" file with the following command: # grep -i "ocredit" /etc/security/pwquality.conf ocredit=-1 If the "ocredit" parameter is greater than "-1", or is commented out, this is a finding.

Fix: F-20934r304959_fix

Configure the Ubuntu operating system to enforce password complexity by requiring that at least one special character be used. Add or update the following line in the "/etc/security/pwquality.conf" file to include the "ocredit=-1" parameter: ocredit=-1

c
The Ubuntu Operating system must disable the x86 Ctrl-Alt-Delete key sequence if a graphical user interface is installed.
CM-6 - High - CCI-000366 - V-219211 - SV-219211r991589_rule
RMF Control
CM-6
Severity
High
CCI
CCI-000366
Version
UBTU-18-010150
Vuln IDs
  • V-219211
  • V-100649
Rule IDs
  • SV-219211r991589_rule
  • SV-109753
A locally logged-on user who presses Ctrl-Alt-Delete, when at the console, can reboot the system. If accidentally pressed, as could happen in the case of a mixed OS environment, this can create the risk of short-term loss of availability of systems due to unintentional reboot. In the graphical environment, risk of unintentional reboot from the Ctrl-Alt-Delete sequence is reduced because the user will be prompted before any action is taken.
Checks: C-20936r304961_chk

Verify the Ubuntu operating system is not configured to reboot the system when Ctrl-Alt-Delete is pressed when using a graphical user interface. Check that the "logout" target is not bound to an action with the following command: # grep logout /etc/dconf/db/local.d/* logout='' If the "logout" key is bound to an action, is commented out, or is missing, this is a finding.

Fix: F-20935r304962_fix

Configure the system to disable the Ctrl-Alt-Delete sequence when using a graphical user interface by creating or editing the /etc/dconf/db/local.d/00-disable-CAD file. Add the setting to disable the Ctrl-Alt-Delete sequence for the graphical user interface: [org/gnome/settings-daemon/plugins/media-keys] logout='' Then update the dconf settings: # dconf update

c
The Ubuntu Operating system must disable the x86 Ctrl-Alt-Delete key sequence.
CM-6 - High - CCI-000366 - V-219212 - SV-219212r991589_rule
RMF Control
CM-6
Severity
High
CCI
CCI-000366
Version
UBTU-18-010151
Vuln IDs
  • V-219212
  • V-100651
Rule IDs
  • SV-219212r991589_rule
  • SV-109755
A locally logged-on user who presses Ctrl-Alt-Delete, when at the console, can reboot the system. If accidentally pressed, as could happen in the case of a mixed OS environment, this can create the risk of short-term loss of availability of systems due to unintentional reboot.
Checks: C-20937r832926_chk

Verify the Ubuntu operating system is not configured to reboot the system when Ctrl-Alt-Delete is pressed. Check that the "ctrl-alt-del.target" (otherwise also known as reboot.target) is not active with the following command: $ sudo systemctl status ctrl-alt-del.target ctrl-alt-del.target Loaded: masked (/dev/null; bad) Active: inactive (dead) If the "ctrl-alt-del.target" is not masked, this is a finding.

Fix: F-20936r832927_fix

Configure the system to disable the Ctrl-Alt-Delete sequence for the command line with the following commands: $ sudo systemctl disable ctrl-alt-del.target $ sudo systemctl mask ctrl-alt-del.target And reload the daemon to take effect: $ sudo systemctl daemon-reload

b
The Ubuntu operating system must generate audit records for the use and modification of the tallylog file.
AU-12 - Medium - CCI-000172 - V-219213 - SV-219213r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010201
Vuln IDs
  • V-219213
  • V-100653
Rule IDs
  • SV-219213r958446_rule
  • SV-109757
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter). Satisfies: SRG-OS-000064-GPOS-00033, SRG-OS-000470-GPOS-00214, SRG-OS-000473-GPOS-00218
Checks: C-20938r304967_chk

Verify the Ubuntu operating system generates an audit record when successful/unsuccessful modifications to the "tallylog" file occur. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep tallylog -w /var/log/tallylog -p wa -k logins If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20937r304968_fix

Configure the audit system to generate an audit event for any successful/unsuccessful modifications to the "tallylog" file occur. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -w /var/log/tallylog -p wa -k logins Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for the use and modification of faillog file.
AU-12 - Medium - CCI-000172 - V-219214 - SV-219214r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010202
Vuln IDs
  • V-219214
  • V-100655
Rule IDs
  • SV-219214r958446_rule
  • SV-109759
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter). Satisfies: SRG-OS-000064-GPOS-00033, SRG-OS-000470-GPOS-00214, SRG-OS-000473-GPOS-00218
Checks: C-20939r304970_chk

Verify the Ubuntu operating system generates an audit record when successful/unsuccessful modifications to the "faillog" file occur. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep faillog -w /var/log/faillog -p wa -k logins If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20938r304971_fix

Configure the audit system to generate an audit event for any successful/unsuccessful modifications to the "faillog" file occur. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -w /var/log/faillog -p wa -k logins Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for the use and modification of the lastlog file.
AU-12 - Medium - CCI-000172 - V-219215 - SV-219215r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010203
Vuln IDs
  • V-219215
  • V-100657
Rule IDs
  • SV-219215r958446_rule
  • SV-109761
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter). Satisfies: SRG-OS-000064-GPOS-00033, SRG-OS-000470-GPOS-00214, SRG-OS-000473-GPOS-00218
Checks: C-20940r304973_chk

Verify the Ubuntu operating system generates an audit record when successful/unsuccessful modifications to the "lastlog" file occur. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep lastlog -w /var/log/lastlog -p wa -k logins If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20939r304974_fix

Configure the audit system to generate an audit event for any successful/unsuccessful modifications to the "lastlog" file occur. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -w /var/log/lastlog -p wa -k logins Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for privileged activities or other system-level access.
AU-12 - Medium - CCI-000172 - V-219216 - SV-219216r991579_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010237
Vuln IDs
  • V-219216
  • V-100659
Rule IDs
  • SV-219216r991579_rule
  • SV-109763
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20941r304976_chk

Verify the Ubuntu operating system audits privileged activities. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep sudo.log -w /var/log/sudo.log -p wa -k priv_actions If the command does not return lines that match the example or the lines are commented out, this is a finding. Notes: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20940r304977_fix

Configure the Ubuntu operating system to audit privileged activities. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -w /var/log/sudo.log -p wa -k actions Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for the /var/log/wtmp file.
AU-12 - Medium - CCI-000172 - V-219217 - SV-219217r991581_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010238
Vuln IDs
  • V-219217
  • V-100661
Rule IDs
  • SV-219217r991581_rule
  • SV-109765
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20942r304979_chk

Verify the Ubuntu operating system generates audit records showing start and stop times for user access to the system via /va/rlog/wtmp. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep '/var/log/wtmp' -w /var/log/wtmp -p wa -k logins If the command does not return a line matching the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20941r304980_fix

Configure the audit system to generate audit events showing start and stop times for user access via the /var/log/wtmp file. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -w /var/log/wtmp -p wa -k logins Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for the /var/run/utmp file.
AU-12 - Medium - CCI-000172 - V-219218 - SV-219218r991581_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010239
Vuln IDs
  • V-219218
  • V-100663
Rule IDs
  • SV-219218r991581_rule
  • SV-109767
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20943r802362_chk

Verify the Ubuntu operating system generates audit records showing start and stop times for user access to the system via /var/run/utmp file. Check the currently configured audit rules with the following command: $ sudo auditctl -l | grep '/var/run/utmp' -w /var/run/utmp -p wa -k logins If the command does not return a line matching the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20942r802363_fix

Configure the audit system to generate audit events showing start and stop times for user access via the /var/run/utmp file. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -w /var/run/utmp -p wa -k logins Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: $ sudo augenrules --load

b
The Ubuntu operating system must generate audit records for the /var/log/btmp file.
AU-12 - Medium - CCI-000172 - V-219219 - SV-219219r991581_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010240
Vuln IDs
  • V-219219
  • V-100665
Rule IDs
  • SV-219219r991581_rule
  • SV-109769
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20944r304985_chk

Verify the Ubuntu operating system generates audit records showing start and stop times for user access to the system via /var/log/btmp file. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep '/var/log/btmp' -w /var/log/btmp -p wa -k logins If the command does not return a line matching the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20943r304986_fix

Configure the audit system to generate audit events showing start and stop times for user access via the /var/log/btmp file. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -w /var/log/btmp -p wa -k logins Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for all account creations, modifications, disabling, and termination events that affect /etc/passwd.
AC-2 - Medium - CCI-000018 - V-219220 - SV-219220r991585_rule
RMF Control
AC-2
Severity
Medium
CCI
CCI-000018
Version
UBTU-18-010244
Vuln IDs
  • V-219220
  • V-100667
Rule IDs
  • SV-219220r991585_rule
  • SV-109771
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter). Satisfies: SRG-OS-000476-GPOS-00221, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000004-GPOS-00004
Checks: C-20945r304988_chk

Verify the Ubuntu operating system generates audit records for all account creations, modifications, disabling, and termination events that affect /etc/passwd. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep passwd -w /etc/passwd -p wa -k usergroup_modification If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20944r304989_fix

Configure the Ubuntu operating system to generate audit records for all account creations, modifications, disabling, and termination events that affect /etc/passwd. Add or update the following rule to "/etc/audit/rules.d/stig.rules": -w /etc/passwd -p wa -k usergroup_modification Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for all account creations, modifications, disabling, and termination events that affect /etc/group.
AU-12 - Medium - CCI-000172 - V-219221 - SV-219221r991585_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010245
Vuln IDs
  • V-219221
  • V-100669
Rule IDs
  • SV-219221r991585_rule
  • SV-109773
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter). Satisfies: SRG-OS-000476-GPOS-00221, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207
Checks: C-20946r304991_chk

Verify the Ubuntu operating system generates audit records for all account creations, modifications, disabling, and termination events that affect /etc/group. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep group -w /etc/group -p wa -k usergroup_modification If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20945r304992_fix

Configure the Ubuntu operating system to generate audit records for all account creations, modifications, disabling, and termination events that affect /etc/group. Add or update the following rule to "/etc/audit/rules.d/stig.rules": -w /etc/group -p wa -k usergroup_modification Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for all account creations, modifications, disabling, and termination events that affect /etc/gshadow.
AU-12 - Medium - CCI-000172 - V-219222 - SV-219222r991585_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010246
Vuln IDs
  • V-219222
  • V-100671
Rule IDs
  • SV-219222r991585_rule
  • SV-109775
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter). Satisfies: SRG-OS-000476-GPOS-00221, SRG-OS-000463-GPOS-00207, SRG-OS-000458-GPOS-00203, SRG-OS-000303-GPOS-00120, SRG-OS-000241-GPOS-00091, SRG-OS-000240-GPOS-00090, SRG-OS-000239-GPOS-00089
Checks: C-20947r304994_chk

Verify the Ubuntu operating system generates audit records for all account creations, modifications, disabling, and termination events that affect /etc/gshadow. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep gshadow -w /etc/gshadow -p wa -k usergroup_modification If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20946r304995_fix

Configure the Ubuntu operating system to generate audit records for all account creations, modifications, disabling, and termination events that affect /etc/gshadow. Add or update the following rule to "/etc/audit/rules.d/stig.rules": -w /etc/gshadow -p wa -k usergroup_modification Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for all account creations, modifications, disabling, and termination events that affect /etc/shadow.
AU-12 - Medium - CCI-000172 - V-219223 - SV-219223r991585_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010247
Vuln IDs
  • V-219223
  • V-100673
Rule IDs
  • SV-219223r991585_rule
  • SV-109777
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter). Satisfies: SRG-OS-000476-GPOS-00221, SRG-OS-000463-GPOS-00207, SRG-OS-000458-GPOS-00203, SRG-OS-000303-GPOS-00120, SRG-OS-000241-GPOS-00091, SRG-OS-000240-GPOS-00090, SRG-OS-000239-GPOS-00089
Checks: C-20948r304997_chk

Verify the Ubuntu operating system generates audit records for all account creations, modifications, disabling, and termination events that affect /etc/shadow. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep shadow -w /etc/shadow -p wa -k usergroup_modification If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20947r304998_fix

Configure the Ubuntu operating system to generate audit records for all account creations, modifications, disabling, and termination events that affect /etc/shadow. Add or update the following rule to "/etc/audit/rules.d/stig.rules": -w /etc/shadow -p wa -k usergroup_modification Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for all account creations, modifications, disabling, and termination events that affect /etc/security/opasswd.
AU-12 - Medium - CCI-000172 - V-219224 - SV-219224r991585_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010248
Vuln IDs
  • V-219224
  • V-100675
Rule IDs
  • SV-219224r991585_rule
  • SV-109779
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter). Satisfies: SRG-OS-000476-GPOS-00221, SRG-OS-000463-GPOS-00207, SRG-OS-000458-GPOS-00203, SRG-OS-000303-GPOS-00120, SRG-OS-000241-GPOS-00091, SRG-OS-000240-GPOS-00090, SRG-OS-000239-GPOS-00089
Checks: C-20949r305000_chk

Verify the Ubuntu operating system generates audit records for all account creations, modifications, disabling, and termination events that affect /etc/security/opasswd. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep opasswd -w /etc/security/opasswd -p wa -k usergroup_modification If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20948r305001_fix

Configure the Ubuntu operating system to generate audit records for all account creations, modifications, disabling, and termination events that affect /etc/security/opasswd. Add or update the following rule to "/etc/audit/rules.d/stig.rules": -w /etc/security/opasswd -p wa -k usergroup_modification Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must produce audit records and reports containing information to establish when, where, what type, the source, and the outcome for all DoD-defined auditable events and actions in near real time.
AU-3 - Medium - CCI-000131 - V-219225 - SV-219225r958414_rule
RMF Control
AU-3
Severity
Medium
CCI
CCI-000131
Version
UBTU-18-010250
Vuln IDs
  • V-219225
  • V-100677
Rule IDs
  • SV-219225r958414_rule
  • SV-109781
Without establishing the when, where, type, source, and outcome of events that occurred, it would be difficult to establish, correlate, and investigate the events leading up to an outage or attack. Without the capability to generate audit records, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit record content that may be necessary to satisfy this requirement includes, for example, time stamps, source and destination addresses, user/process identifiers, event descriptions, success/fail indications, filenames involved, and access control or flow control rules invoked. Reconstruction of harmful events or forensic analysis is not possible if audit records do not contain enough information. Successful incident response and auditing relies on timely, accurate system information and analysis in order to allow the organization to identify and respond to potential incidents in a proficient manner. If the operating system does not provide the ability to centrally review the operating system logs, forensic analysis is negatively impacted. Associating event types with detected events in the Ubuntu operating system audit logs provides a means of investigating an attack; recognizing resource utilization or capacity thresholds; or identifying an improperly configured operating system. Satisfies: SRG-OS-000038-GPOS-00016, SRG-OS-000039-GPOS-00017, SRG-OS-000040-GPOS-00018, SRG-OS-000041-GPOS-00019, SRG-OS-000042-GPOS-00020, SRG-OS-000042-GPOS-00021, SRG-OS-000051-GPOS-00024, SRG-OS-000054-GPOS-00025, SRG-OS-000062-GPOS-00031, SRG-OS-000122-GPOS-00063, SRG-OS-000337-GPOS-00129, SRG-OS-000348-GPOS-00136, SRG-OS-000349-GPOS-00137, SRG-OS-000350-GPOS-00138, SRG-OS-000351-GPOS-00139, SRG-OS-000352-GPOS-00140, SRG-OS-000365-GPOS-00152, SRG-OS-000392-GPOS-00172, SRG-OS-000475-GPOS-00220
Checks: C-20950r305003_chk

Verify the audit service is configured to produce audit records. Check that the audit service is installed properly with the following command: # dpkg -l | grep auditd If the "auditd" package is not installed, this is a finding. Check that the audit service is enabled with the following command: # systemctl is-enabled auditd.service If the command above returns "disabled", this is a finding. Check that the audit service is properly running and active on the system with the following command: # systemctl is-active auditd.service active If the command above returns "inactive", this is a finding.

Fix: F-20949r305004_fix

Configure the audit service to produce audit records containing the information needed to establish when (date and time) an event occurred. Install the audit service (if the audit service is not already installed) with the following command: # sudo apt-get install auditd Enable the audit service with the following command: # sudo systemctl enable auditd.service In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must alert the ISSO and SA (at a minimum) in the event of an audit processing failure.
AU-5 - Medium - CCI-000139 - V-219226 - SV-219226r958424_rule
RMF Control
AU-5
Severity
Medium
CCI
CCI-000139
Version
UBTU-18-010300
Vuln IDs
  • V-219226
  • V-100679
Rule IDs
  • SV-219226r958424_rule
  • SV-109783
It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without this notification, the security personnel may be unaware of an impending failure of the audit capability, and system operation may be adversely affected. Audit processing failures include software/hardware errors, failures in the audit capturing mechanisms, and audit storage capacity being reached or exceeded. This requirement applies to each audit data storage repository (i.e., distinct information system component where audit records are stored), the centralized audit storage capacity of organizations (i.e., all audit data storage repositories combined), or both.
Checks: C-20951r305006_chk

Verify that the System Administrator (SA) and Information System Security Officer (ISSO) (at a minimum) are notified in the event of an audit processing failure. Check that the Ubuntu operating system notifies the SA and ISSO (at a minimum) win the event of an audit processing failure with the following command: # sudo grep action_mail_acct = root /etc/audit/auditd.conf action_mail_acct = root If the value of the "action_mail_acct" keyword is not set to "root" and/or other accounts for security personnel, the "action_mail_acct" keyword is missing, or the returned line is commented out, this is a finding.

Fix: F-20950r305007_fix

Configure "auditd" service to notify the System Administrator (SA) and Information System Security Officer (ISSO) in the event of an audit processing failure. Edit the following line in "/etc/audit/auditd.conf" to ensure that administrators are notified via email for those situations: action_mail_acct = root Restart the auditd service so the changes take effect: # sudo systemctl restart auditd.service

b
The Ubuntu operating system must shut down by default upon audit failure (unless availability is an overriding concern).
AU-5 - Medium - CCI-000140 - V-219227 - SV-219227r958426_rule
RMF Control
AU-5
Severity
Medium
CCI
CCI-000140
Version
UBTU-18-010301
Vuln IDs
  • V-219227
  • V-100681
Rule IDs
  • SV-219227r958426_rule
  • SV-109785
It is critical that when the Ubuntu operating system is at risk of failing to process audit logs as required, it takes action to mitigate the failure. Audit processing failures include: software/hardware errors; failures in the audit capturing mechanisms; and audit storage capacity being reached or exceeded. Responses to audit failure depend upon the nature of the failure mode. When availability is an overriding concern, other approved actions in response to an audit failure are as follows: 1) If the failure was caused by the lack of audit record storage capacity, the Ubuntu operating system must continue generating audit records if possible (automatically restarting the audit service if necessary), overwriting the oldest audit records in a first-in-first-out manner. 2) If audit records are sent to a centralized collection server and communication with this server is lost or the server fails, the Ubuntu operating system must queue audit records locally until communication is restored or until the audit records are retrieved manually. Upon restoration of the connection to the centralized collection server, action should be taken to synchronize the local audit data with the collection server.
Checks: C-20952r305009_chk

Verify the Ubuntu operating system takes the appropriate action when the audit storage volume is full. Check that the Ubuntu operating system takes the appropriate action when the audit storage volume is full with the following command: # sudo grep disk_full_action /etc/audit/auditd.conf disk_full_action = HALT If the value of the "disk_full_action" option is not "SYSLOG", "SINGLE", or "HALT", or the line is commented out, this is a finding.

Fix: F-20951r305010_fix

Configure the Ubuntu operating system to shut down by default upon audit failure (unless availability is an overriding concern). Add or update the following line (depending on configuration "disk_full_action" can be set to "SYSLOG", "HALT" or "SINGLE") in "/etc/audit/auditd.conf" file: disk_full_action = HALT Restart the auditd service so the changes take effect: # sudo systemctl restart auditd.service

b
The Ubuntu operating system must be configured so that audit log files cannot be read or write-accessible by unauthorized users.
AU-9 - Medium - CCI-000162 - V-219228 - SV-219228r958436_rule
RMF Control
AU-9
Severity
Medium
CCI
CCI-000162
Version
UBTU-18-010305
Vuln IDs
  • V-219228
  • V-100683
Rule IDs
  • SV-219228r958436_rule
  • SV-109787
If audit information were to become compromised, then forensic analysis and discovery of the true source of potentially malicious system activity is impossible to achieve. To ensure the veracity of audit information, the operating system must protect audit information from unauthorized modification. Audit information includes all information (e.g., audit records, audit settings, audit reports) needed to successfully audit information system activity. Satisfies: SRG-OS-000058-GPOS-00028, SRG-OS-000057-GPOS-00027
Checks: C-20953r305012_chk

Verify that the audit log files have a mode of "0600" or less permissive. First determine where the audit logs are stored with the following command: # sudo grep -iw log_file /etc/audit/auditd.conf log_file = /var/log/audit/audit.log Using the path of the directory containing the audit logs, check if the audit log files have a mode of "0600" or less by using the following command: # sudo stat -c "%n %a" /var/log/audit/* /var/log/audit/audit.log 600 If the audit log files have a mode more permissive than "0600", this is a finding.

Fix: F-20952r305013_fix

Configure the audit log files to have a mode of "0600" or less permissive. First determine where the audit logs are stored with the following command: # sudo grep -iw log_file /etc/audit/auditd.conf log_file = /var/log/audit/audit.log Using the path of the directory containing the audit logs, configure the audit log files to have a mode of "0600" or less permissive by using the following command: # sudo chmod 0600 /var/log/audit/*

b
The Ubuntu operating system must permit only authorized accounts ownership of the audit log files.
AU-9 - Medium - CCI-000162 - V-219229 - SV-219229r958436_rule
RMF Control
AU-9
Severity
Medium
CCI
CCI-000162
Version
UBTU-18-010306
Vuln IDs
  • V-219229
  • V-100685
Rule IDs
  • SV-219229r958436_rule
  • SV-109789
If audit information were to become compromised, then forensic analysis and discovery of the true source of potentially malicious system activity is impossible to achieve. To ensure the veracity of audit information, the operating system must protect audit information from unauthorized modification. Audit information includes all information (e.g., audit records, audit settings, audit reports) needed to successfully audit information system activity. Satisfies: SRG-OS-000058-GPOS-00028, SRG-OS-000057-GPOS-00027
Checks: C-20954r305015_chk

Verify that the audit log files are owned by "root" account. First determine where the audit logs are stored with the following command: # sudo grep -iw log_file /etc/audit/auditd.conf log_file = /var/log/audit/audit.log Using the path of the directory containing the audit logs, check if the audit log files are owned by the "root" user by using the following command: # sudo stat -c "%n %U" /var/log/audit/* /var/log/audit/audit.log root If the audit log files are owned by an user other than "root", this is a finding.

Fix: F-20953r305016_fix

Configure the audit log files to be owned by "root" user. First determine where the audit logs are stored with the following command: # sudo grep -iw log_file /etc/audit/auditd.conf log_file = /var/log/audit/audit.log Using the path of the directory containing the audit logs, configure the audit log files to be owned by "root" user by using the following command: # sudo chown root /var/log/audit/*

b
The Ubuntu operating system must permit only authorized groups to own the audit log files.
AU-9 - Medium - CCI-000162 - V-219230 - SV-219230r958436_rule
RMF Control
AU-9
Severity
Medium
CCI
CCI-000162
Version
UBTU-18-010307
Vuln IDs
  • V-219230
  • V-100687
Rule IDs
  • SV-219230r958436_rule
  • SV-109791
If audit information were to become compromised, then forensic analysis and discovery of the true source of potentially malicious system activity is impossible to achieve. To ensure the veracity of audit information, the operating system must protect audit information from unauthorized modification. Audit information includes all information (e.g., audit records, audit settings, audit reports) needed to successfully audit information system activity. Satisfies: SRG-OS-000058-GPOS-00028, SRG-OS-000057-GPOS-00027
Checks: C-20955r305018_chk

Verify that the audit log files are owned by "root" group. First determine where the audit logs are stored with the following command: # sudo grep -iw log_file /etc/audit/auditd.conf log_file = /var/log/audit/audit.log Using the path of the directory containing the audit logs, check if the audit log files are owned by the "root" group by using the following command: # sudo stat -c "%n %G" /var/log/audit/* /var/log/audit/audit.log root If the audit log files are owned by a group other than "root", this is a finding.

Fix: F-20954r305019_fix

Configure the audit log files to be owned by "root" group. First determine where the audit logs are stored with the following command: # sudo grep -iw log_file /etc/audit/auditd.conf log_file = /var/log/audit/audit.log Using the path of the directory containing the audit logs, configure the audit log files to be owned by "root" group by using the following command: # sudo chown :root /var/log/audit/*

b
The Ubuntu operating system must be configured so that the audit log directory is not write-accessible by unauthorized users.
AU-9 - Medium - CCI-000164 - V-219231 - SV-219231r958438_rule
RMF Control
AU-9
Severity
Medium
CCI
CCI-000164
Version
UBTU-18-010308
Vuln IDs
  • V-219231
  • V-100689
Rule IDs
  • SV-219231r958438_rule
  • SV-109793
If audit information were to become compromised, then forensic analysis and discovery of the true source of potentially malicious system activity is impossible to achieve. To ensure the veracity of audit information, the operating system must protect audit information from unauthorized deletion. This requirement can be achieved through multiple methods, which will depend upon system architecture and design. Audit information includes all information (e.g., audit records, audit settings, audit reports) needed to successfully audit information system activity.
Checks: C-20956r305021_chk

Verify that the audit log directory has a mode of "0750" or less permissive. First determine where the audit logs are stored with the following command: # sudo grep -iw log_file /etc/audit/auditd.conf log_file = /var/log/audit/audit.log Using the path of the directory containing the audit logs, check if the directory has a mode of "0750" or less by using the following command: # sudo stat -c "%n %a" /var/log/audit /var/log/audit 750 If the audit log directory has a mode more permissive than "0750", this is a finding.

Fix: F-20955r305022_fix

Configure the audit log directory to have a mode of "0750" or less permissive. First determine where the audit logs are stored with the following command: # sudo grep -iw log_file /etc/audit/auditd.conf log_file = /var/log/audit/audit.log Using the path of the directory containing the audit logs, configure the audit log directory to have a mode of "0750" or less permissive by using the following command: # chmod -R g-w,o-rwx /var/log/audit

b
The Ubuntu operating system must allow only authorized accounts to own the audit log directory.
AU-9 - Medium - CCI-000164 - V-219232 - SV-219232r958438_rule
RMF Control
AU-9
Severity
Medium
CCI
CCI-000164
Version
UBTU-18-010309
Vuln IDs
  • V-219232
  • V-100691
Rule IDs
  • SV-219232r958438_rule
  • SV-109795
If audit information were to become compromised, then forensic analysis and discovery of the true source of potentially malicious system activity is impossible to achieve. To ensure the veracity of audit information, the operating system must protect audit information from unauthorized deletion. This requirement can be achieved through multiple methods, which will depend upon system architecture and design. Audit information includes all information (e.g., audit records, audit settings, audit reports) needed to successfully audit information system activity.
Checks: C-20957r305024_chk

Verify that the audit log directory is owned by "root" account. First determine where the audit logs are stored with the following command: # sudo grep -iw log_file /etc/audit/auditd.conf log_file = /var/log/audit/audit.log Using the path of the directory containing the audit logs, check if the directory is owned by the "root" user by using the following command: # sudo stat -c "%n %U" /var/log/audit /var/log/audit root If the audit log directory is owned by an user other than "root", this is a finding.

Fix: F-20956r305025_fix

Configure the audit log directory to be owned by "root" user. First determine where the audit logs are stored with the following command: # sudo grep -iw log_file /etc/audit/auditd.conf log_file = /var/log/audit/audit.log Using the path of the directory containing the audit logs, configure the audit log directory to be owned by "root" user by using the following command: # chown -R root /var/log/audit

b
The Ubuntu operating system must ensure only authorized groups can own the audit log directory and its underlying files.
AU-9 - Medium - CCI-000164 - V-219233 - SV-219233r958438_rule
RMF Control
AU-9
Severity
Medium
CCI
CCI-000164
Version
UBTU-18-010310
Vuln IDs
  • V-219233
  • V-100693
Rule IDs
  • SV-219233r958438_rule
  • SV-109797
If audit information were to become compromised, then forensic analysis and discovery of the true source of potentially malicious system activity is impossible to achieve. To ensure the veracity of audit information, the operating system must protect audit information from unauthorized deletion. This requirement can be achieved through multiple methods, which will depend upon system architecture and design. Audit information includes all information (e.g., audit records, audit settings, audit reports) needed to successfully audit information system activity.
Checks: C-20958r305027_chk

Verify that the audit log directory is owned by "root" group. First determine where the audit logs are stored with the following command: # sudo grep -iw log_file /etc/audit/auditd.conf log_file = /var/log/audit/audit.log Using the path of the directory containing the audit logs, check if the directory is owned by the "root" group by using the following command: # sudo stat -c "%n %G" /var/log/audit /var/log/audit root If the audit log directory is owned by a group other than "root", this is a finding.

Fix: F-20957r305028_fix

Configure the audit log directory to be owned by "root" group. First determine where the audit logs are stored with the following command: # sudo grep -iw log_file /etc/audit/auditd.conf log_file = /var/log/audit/audit.log Using the path of the directory containing the audit logs, configure the audit log directory to be owned by "root" group by using the following command: # chown -R :root /var/log/audit

b
The Ubuntu operating system must be configured so that audit configuration files are not write-accessible by unauthorized users.
AU-12 - Medium - CCI-000171 - V-219234 - SV-219234r958444_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000171
Version
UBTU-18-010311
Vuln IDs
  • V-219234
  • V-100695
Rule IDs
  • SV-219234r958444_rule
  • SV-109799
Without the capability to restrict which roles and individuals can select which events are audited, unauthorized personnel may be able to prevent the auditing of critical events. Misconfigured audits may degrade the system's performance by overwhelming the audit log. Misconfigured audits may also make it more difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Checks: C-20959r305030_chk

Verify that "/etc/audit/audit.rules", "/etc/audit/rules.d/*" and "/etc/audit/auditd.conf" files have a mode of 0640 or less permissive by using the following command: # sudo ls -al /etc/audit/ /etc/audit/rules.d/ /etc/audit/: drwxr-x--- 3 root root 4096 Nov 25 11:02 . drwxr-xr-x 130 root root 12288 Dec 19 13:42 .. -rw-r----- 1 root root 804 Nov 25 11:01 auditd.conf -rw-r----- 1 root root 9128 Dec 27 09:56 audit.rules -rw-r----- 1 root root 9373 Dec 27 09:56 audit.rules.prev -rw-r----- 1 root root 127 Feb 7 2018 audit-stop.rules drwxr-x--- 2 root root 4096 Dec 27 09:56 rules.d /etc/audit/rules.d/: drwxr-x--- 2 root root 4096 Dec 27 09:56 . drwxr-x--- 3 root root 4096 Nov 25 11:02 .. -rw-r----- 1 root root 10357 Dec 27 09:56 stig.rules If "/etc/audit/audit.rule","/etc/audit/rules.d/*" or "/etc/audit/auditd.conf" file have a mode more permissive than "0640", this is a finding.

Fix: F-20958r305031_fix

Configure "/etc/audit/audit.rules", "/etc/audit/rules.d/*" and "/etc/audit/auditd.conf" files to have a mode of 0640 by using the following command: # chmod -R 0640 /etc/audit/audit*.{rules,conf} /etc/audit/rules.d/* Note: The "root" account must be used to edit any files in the /etc/audit and /etc/audit/rules.d/ directories.

b
The Ubuntu operating system must permit only authorized accounts to own the audit configuration files.
AU-12 - Medium - CCI-000171 - V-219235 - SV-219235r958444_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000171
Version
UBTU-18-010312
Vuln IDs
  • V-219235
  • V-100697
Rule IDs
  • SV-219235r958444_rule
  • SV-109801
Without the capability to restrict which roles and individuals can select which events are audited, unauthorized personnel may be able to prevent the auditing of critical events. Misconfigured audits may degrade the system's performance by overwhelming the audit log. Misconfigured audits may also make it more difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Checks: C-20960r305033_chk

Verify that "/etc/audit/audit.rules", "/etc/audit/rules.d/*" and "/etc/audit/auditd.conf" files are owned by root account by using the following command: # sudo ls -al /etc/audit/ /etc/audit/rules.d/ /etc/audit/: drwxr-x--- 3 root root 4096 Nov 25 11:02 . drwxr-xr-x 130 root root 12288 Dec 19 13:42 .. -rw-r----- 1 root root 804 Nov 25 11:01 auditd.conf -rw-r----- 1 root root 9128 Dec 27 09:56 audit.rules -rw-r----- 1 root root 9373 Dec 27 09:56 audit.rules.prev -rw-r----- 1 root root 127 Feb 7 2018 audit-stop.rules drwxr-x--- 2 root root 4096 Dec 27 09:56 rules.d /etc/audit/rules.d/: drwxr-x--- 2 root root 4096 Dec 27 09:56 . drwxr-x--- 3 root root 4096 Nov 25 11:02 .. -rw-r----- 1 root root 10357 Dec 27 09:56 stig.rules If "/etc/audit/audit.rules" or "/etc/audit/rules.d/*" or "/etc/audit/auditd.conf" file is owned by a user other than "root", this is a finding.

Fix: F-20959r305034_fix

Configure "/etc/audit/audit.rules", "/etc/audit/rules.d/*" and "/etc/audit/auditd.conf" files to be owned by root user by using the following command: # chown root /etc/audit/audit*.{rules,conf} /etc/audit/rules.d/* Note: The "root" account must be used to edit any files in the /etc/audit and /etc/audit/rules.d/ directories.

b
The Ubuntu operating system must permit only authorized groups to own the audit configuration files.
AU-12 - Medium - CCI-000171 - V-219236 - SV-219236r958444_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000171
Version
UBTU-18-010313
Vuln IDs
  • V-219236
  • V-100699
Rule IDs
  • SV-219236r958444_rule
  • SV-109803
Without the capability to restrict which roles and individuals can select which events are audited, unauthorized personnel may be able to prevent the auditing of critical events. Misconfigured audits may degrade the system's performance by overwhelming the audit log. Misconfigured audits may also make it more difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Checks: C-20961r305036_chk

Verify that "/etc/audit/audit.rules", "/etc/audit/rules.d/*" and "/etc/audit/auditd.conf" files are owned by root group by using the following command: # sudo ls -al /etc/audit/ /etc/audit/rules.d/ /etc/audit/: drwxr-x--- 3 root root 4096 Nov 25 11:02 . drwxr-xr-x 130 root root 12288 Dec 19 13:42 .. -rw-r----- 1 root root 804 Nov 25 11:01 auditd.conf -rw-r----- 1 root root 9128 Dec 27 09:56 audit.rules -rw-r----- 1 root root 9373 Dec 27 09:56 audit.rules.prev -rw-r----- 1 root root 127 Feb 7 2018 audit-stop.rules drwxr-x--- 2 root root 4096 Dec 27 09:56 rules.d /etc/audit/rules.d/: drwxr-x--- 2 root root 4096 Dec 27 09:56 . drwxr-x--- 3 root root 4096 Nov 25 11:02 .. -rw-r----- 1 root root 10357 Dec 27 09:56 stig.rules If "/etc/audit/audit.rules" or "/etc/audit/rules.d/*" or "/etc/audit/auditd.conf" file is owned by a group other than "root", this is a finding.

Fix: F-20960r305037_fix

Configure "/etc/audit/audit.rules", "/etc/audit/rules.d/*" and "/etc/audit/auditd.conf" files to be owned by root group by using the following command: # chown :root /etc/audit/audit*.{rules,conf} /etc/audit/rules.d/* Note: The "root" account must be used to edit any files in the /etc/audit and /etc/audit/rules.d/ directories.

a
The Ubuntu operating system must allocate audit record storage capacity to store at least one weeks worth of audit records, when audit records are not immediately sent to a central audit record storage facility.
AU-4 - Low - CCI-001849 - V-219237 - SV-219237r958752_rule
RMF Control
AU-4
Severity
Low
CCI
CCI-001849
Version
UBTU-18-010314
Vuln IDs
  • V-219237
  • V-100701
Rule IDs
  • SV-219237r958752_rule
  • SV-109805
In order to ensure Ubuntu operating systems have sufficient storage capacity in which to write the audit logs, Ubuntu operating system needs to be able to allocate audit record storage capacity. The task of allocating audit record storage capacity is usually performed during initial installation of the Ubuntu operating system.
Checks: C-20962r305039_chk

Verify the Ubuntu operating system allocates audit record storage capacity to store at least one week's worth of audit records when audit records are not immediately sent to a central audit record storage facility. Determine which partition the audit records are being written to with the following command: # sudo grep log_file /etc/audit/auditd.conf log_file = /var/log/audit/audit.log Check the size of the partition that audit records are written to (with the example being /var/log/audit/) with the following command: # df –h /var/log/audit/ /dev/sda2 24G 10.4G 13.6G 43% /var/log/audit If the audit records are not written to a partition made specifically for audit records (/var/log/audit is a separate partition), determine the amount of space being used by other files in the partition with the following command: #du –sh [audit_partition] 1.8G /var/log/audit Note: The partition size needed to capture a week's worth of audit records is based on the activity level of the system and the total storage capacity available. In normal circumstances, 10.0 GB of storage space for audit records will be sufficient. If the audit record partition is not allocated for sufficient storage capacity, this is a finding.

Fix: F-20961r305040_fix

Allocate enough storage capacity for at least one week's worth of audit records when audit records are not immediately sent to a central audit record storage facility. If audit records are stored on a partition made specifically for audit records, use the "parted" program to resize the partition with sufficient space to contain one week's worth of audit records. If audit records are not stored on a partition made specifically for audit records, a new partition with sufficient amount of space will need be to be created. Set the auditd server to point to the mount point where the audit records must be located: # sudo sed -i -E 's@^(log_file\s*=\s*).*@\1 <log mountpoint>/audit.log@' /etc/audit/auditd.conf where <log mountpoint> is the aforementioned mount point.

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the su command.
AU-12 - Medium - CCI-000172 - V-219238 - SV-219238r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010315
Vuln IDs
  • V-219238
  • V-100703
Rule IDs
  • SV-219238r958446_rule
  • SV-109807
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20963r569456_chk

Verify if the Ubuntu operating system generates audit records when successful/unsuccessful attempts to use the "su" command occur. Check the configured audit rules with the following commands: # sudo auditctl -l | grep '/bin/su' -a always,exit -F path=/bin/su -F perm=x -F auid&gt;=1000 -F auid!=-1 -k privileged-priv_change If the command does not return lines that match the example or the lines are commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20962r569457_fix

Configure the Ubuntu operating system to generate audit records when successful/unsuccessful attempts to use the "su" command occur. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/bin/su -F perm=x -F auid>=1000 -F auid!=4294967295 -k privileged-priv_change In order to reload the rules file, issue the following command: # sudo augenrules --load Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory.

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the chfn command.
AU-12 - Medium - CCI-000172 - V-219239 - SV-219239r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010316
Vuln IDs
  • V-219239
  • V-100705
Rule IDs
  • SV-219239r958446_rule
  • SV-109809
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20964r305045_chk

Verify if the Ubuntu operating system generates audit records when successful/unsuccessful attempts to use of the "chfn" command occur. Check the configured audit rules with the following commands: # sudo auditctl -l | grep '/usr/bin/chfn' -a always,exit -F path=/usr/bin/chfn -F perm=x -F auid&gt;=1000 -F auid!=-1 -k privileged-chfn If the command does not return lines that match the example or the lines are commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20963r305046_fix

Configure the audit system to generate an audit event for any successful/unsuccessful uses of the "chfn" command. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/usr/bin/chfn -F perm=x -F auid>=1000 -F auid!=4294967295 -k privileged-chfn In order to reload the rules file, issue the following command: # sudo augenrules --load Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory.

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the mount command.
AU-12 - Medium - CCI-000172 - V-219240 - SV-219240r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010317
Vuln IDs
  • V-219240
  • V-100707
Rule IDs
  • SV-219240r958446_rule
  • SV-109811
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20965r305048_chk

Verify if the Ubuntu operating system generates audit records when successful/unsuccessful attempts to use of the "mount" command occur. Check the configured audit rules with the following commands: # sudo auditctl -l | grep '/bin/mount' -a always,exit -F path=/bin/mount -F perm=x -F auid&gt;=1000 -F auid!=-1 -k privileged-mount If the command does not return lines that match the example or the lines are commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20964r305049_fix

Configure the audit system to generate an audit event for any successful/unsuccessful use of the "mount" command. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/bin/mount -F perm=x -F auid>=1000 -F auid!=4294967295 -k privileged-mount In order to reload the rules file, issue the following command: # sudo augenrules --load Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory.

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the umount command.
AU-12 - Medium - CCI-000172 - V-219241 - SV-219241r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010318
Vuln IDs
  • V-219241
  • V-100709
Rule IDs
  • SV-219241r958446_rule
  • SV-109813
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20966r305051_chk

Verify if the Ubuntu operating system generates audit records when successful/unsuccessful attempts to use of the "umount" command occur. Check the configured audit rules with the following commands: # sudo auditctl -l | grep '/bin/umount' -a always,exit -F path=/bin/umount -F perm=x -F auid&gt;=1000 -F auid!=-1 -k privileged-umount If the command does not return lines that match the example or the lines are commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20965r305052_fix

Configure the audit system to generate an audit event for any successful/unsuccessful use of the "umount" command. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/bin/umount -F perm=x -F auid>=1000 -F auid!=4294967295 -k privileged-umount In order to reload the rules file, issue the following command: # sudo augenrules --load Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory.

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the ssh-agent command.
AU-12 - Medium - CCI-000172 - V-219242 - SV-219242r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010319
Vuln IDs
  • V-219242
  • V-100711
Rule IDs
  • SV-219242r958446_rule
  • SV-109815
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20967r305054_chk

Verify the Ubuntu operating system generates an audit record when successful/unsuccessful attempts to use the "ssh-agent" command occur. Check the configured audit rules with the following commands: # sudo auditctl -l | grep '/usr/bin/ssh-agent' -a always,exit -F path=/usr/bin/ssh-agent -F perm=x -F auid&gt;=1000 -F auid!=-1 -k privileged-ssh If the command does not return lines that match the example or the lines are commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20966r305055_fix

Configure the audit system to generate an audit event for any successful/unsuccessful use of the "ssh-agent" command. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/usr/bin/ssh-agent -F perm=x -F auid>=1000 -F auid!=4294967295 -k privileged-ssh In order to reload the rules file, issue the following command: # sudo augenrules --load Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory.

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the ssh-keysign command.
AU-12 - Medium - CCI-000172 - V-219243 - SV-219243r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010320
Vuln IDs
  • V-219243
  • V-100713
Rule IDs
  • SV-219243r958446_rule
  • SV-109817
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20968r305057_chk

Verify the Ubuntu operating system generates an audit record when successful/unsuccessful attempts to use the "ssh-keysign" command occur. Check the configured audit rules with the following commands: #sudo auditctl -l | grep ssh-keysign -a always,exit -F path=/usr/lib/openssh/ssh-keysign -F perm=x -F auid&gt;=1000 -F auid!=-1 -k privileged-ssh If the command does not return lines that match the example or the lines are commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20967r305058_fix

Configure the audit system to generate an audit event for any successful/unsuccessful use of the "ssh-keysign" command. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/usr/lib/openssh/ssh-keysign -F perm=x -F auid>=1000 -F auid!=4294967295 -k privileged-ssh In order to reload the rules file, issue the following command: # sudo augenrules --load Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory.

b
The Ubuntu operating system must generate audit records for any usage of the setxattr, fsetxattr, lsetxattr, removexattr, fremovexattr, and lremovexattr system calls.
AU-12 - Medium - CCI-000172 - V-219244 - SV-219244r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010321
Vuln IDs
  • V-219244
  • V-100715
Rule IDs
  • SV-219244r958446_rule
  • SV-109819
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter). The system call rules are loaded into a matching engine that intercepts each syscall made by all programs on the system. Therefore, it is very important to use syscall rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance is helped, however, by combining syscalls into one rule whenever possible. Satisfies: SRG-OS-000462-GPOS-00206
Checks: C-20969r809512_chk

Verify the Ubuntu operating system generates an audit record upon successful/unsuccessful attempts to use the "setxattr", "fsetxattr", "lsetxattr", "removexattr", "fremovexattr", and "lremovexattr" system calls. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep xattr -a always,exit -F arch=b32 -S setxattr,fsetxattr,lsetxattr,removexattr,fremovexattr,lremovexattr -F auid&gt;=1000 -F auid!=-1 -k perm_mod -a always,exit -F arch=b32 -S setxattr,fsetxattr,lsetxattr,removexattr,fremovexattr,lremovexattr -F auid=0 -k perm_mod -a always,exit -F arch=b64 -S setxattr,fsetxattr,lsetxattr,removexattr,fremovexattr,lremovexattr -F auid&gt;=1000 -F auid!=-1 -k perm_mod -a always,exit -F arch=b64 -S setxattr,fsetxattr,lsetxattr,removexattr,fremovexattr,lremovexattr -F auid=0 -k perm_mod If the command does not return audit rules for the "setxattr", "fsetxattr", "lsetxattr", "removexattr", "fremovexattr", and "lremovexattr" syscalls or the lines are commented out, this is a finding. Notes: For 32-bit architectures, only the 32-bit specific output lines from the commands are required. The "-k" allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20968r809513_fix

Configure the audit system to generate an audit event for any successful/unsuccessful use of the "setxattr", "fsetxattr", "lsetxattr", "removexattr", "fremovexattr", and "lremovexattr" system calls. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F arch=b32 -S setxattr,fsetxattr,lsetxattr,removexattr,fremovexattr,lremovexattr -F auid>=1000 -F auid!=4294967295 -k perm_mod -a always,exit -F arch=b32 -S setxattr,fsetxattr,lsetxattr,removexattr,fremovexattr,lremovexattr -F auid=0 -k perm_mod -a always,exit -F arch=b64 -S setxattr,fsetxattr,lsetxattr,removexattr,fremovexattr,lremovexattr -F auid>=1000 -F auid!=4294967295 -k perm_mod -a always,exit -F arch=b64 -S setxattr,fsetxattr,lsetxattr,removexattr,fremovexattr,lremovexattr -F auid=0 -k perm_mod Notes: For 32-bit architectures, only the 32-bit specific entries are required. The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. To reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the chown, fchown, fchownat, and lchown system calls.
AU-12 - Medium - CCI-000172 - V-219250 - SV-219250r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010327
Vuln IDs
  • V-219250
  • V-100725
Rule IDs
  • SV-219250r958446_rule
  • SV-109829
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter). The system call rules are loaded into a matching engine that intercepts each syscall made by all programs on the system. Therefore, it is very important to use syscall rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance is helped, however, by combining syscalls into one rule whenever possible. Satisfies: SRG-OS-000064-GPOS-00033, SRG-OS-000462-GPOS-00206
Checks: C-20975r809515_chk

Verify the Ubuntu operating system generates an audit record upon successful/unsuccessful attempts to use the "chown", "fchown", "fchownat", and "lchown" system calls. Check the configured audit rules with the following commands: # sudo auditctl -l | grep chown -a always,exit -F arch=b32 -S chown,fchown,fchownat,lchown -F auid&gt;=1000 -F auid!=-1 -k perm_chng -a always,exit -F arch=b64 -S chown,fchown,fchownat,lchown -F auid&gt;=1000 -F auid!=-1 -k perm_chng If the command does not return audit rules for the "chown", "fchown", "fchownat", and "lchown" syscalls or the lines are commented out, this is a finding. Notes: For 32-bit architectures, only the 32-bit specific output lines from the commands are required. The "-k" allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20974r809516_fix

Configure the audit system to generate an audit event for any successful/unsuccessful use of the "chown", "fchown", "fchownat", and "lchown" system calls. Add or update the following rules in the "/etc/audit/rules.d/stig.rules": -a always,exit -F arch=b32 -S chown,fchown,fchownat,lchown -F auid>=1000 -F auid!=4294967295 -k perm_chng -a always,exit -F arch=b64 -S chown,fchown,fchownat,lchown -F auid>=1000 -F auid!=4294967295 -k perm_chng Notes: For 32-bit architectures, only the 32-bit specific entries are required. The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. To reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the chmod, fchmod, and fchmodat system calls.
AU-12 - Medium - CCI-000172 - V-219254 - SV-219254r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010331
Vuln IDs
  • V-219254
  • V-100733
Rule IDs
  • SV-219254r958446_rule
  • SV-109837
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter). The system call rules are loaded into a matching engine that intercepts each syscall made by all programs on the system. Therefore, it is very important to use syscall rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance is helped, however, by combining syscalls into one rule whenever possible. Satisfies: SRG-OS-000064-GPOS-00033, SRG-OS-000462-GPOS-00206
Checks: C-20979r809518_chk

Verify the Ubuntu operating system generates an audit record upon successful/unsuccessful attempts to use the "chmod", "fchmod", and "fchmodat" system calls. Check the configured audit rules with the following commands: # sudo auditctl -l | grep chmod -a always,exit -F arch=b32 -S chmod,fchmod,fchmodat -F auid&gt;=1000 -F auid!=-1 -k perm_chng -a always,exit -F arch=b64 -S chmod,fchmod,fchmodat -F auid&gt;=1000 -F auid!=-1 -k perm_chng If the command does not return audit rules for the "chmod", "fchmod", and "fchmodat" syscalls or the lines are commented out, this is a finding. Notes: For 32-bit architectures, only the 32-bit specific output lines from the commands are required. The "-k" allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20978r809519_fix

Configure the audit system to generate an audit event for any successful/unsuccessful use of the "chmod", "fchmod", and "fchmodat" system calls. Add or update the following rules in the "/etc/audit/rules.d/stig.rules": -a always,exit -F arch=b32 -S chmod,fchmod,fchmodat -F auid>=1000 -F auid!=4294967295 -k perm_chng -a always,exit -F arch=b64 -S chmod,fchmod,fchmodat -F auid>=1000 -F auid!=4294967295 -k perm_chng Notes: For 32-bit architectures, only the 32-bit specific entries are required. The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. To reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the creat, open, openat, open_by_handle_at, truncate, and ftruncate system calls.
AU-12 - Medium - CCI-000172 - V-219257 - SV-219257r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010334
Vuln IDs
  • V-219257
  • V-100739
Rule IDs
  • SV-219257r958446_rule
  • SV-109843
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter). The system call rules are loaded into a matching engine that intercepts each syscall made by all programs on the system. Therefore, it is very important to use syscall rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance is helped, however, by combining syscalls into one rule whenever possible. Satisfies: SRG-OS-000064-GPOS-00033, SRG-OS-000474-GPOS-00219
Checks: C-20982r809521_chk

Verify the Ubuntu operating system generates an audit record upon unsuccessful attempts to use the "creat", "open", "openat", "open_by_handle_at", "truncate", and "ftruncate" system calls. Check the configured audit rules with the following commands: # sudo auditctl -l | grep 'open\|truncate\|creat' -a always,exit -F arch=b32 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EPERM -F auid&gt;=1000 -F auid!=-1 -k perm_access -a always,exit -F arch=b32 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EACCES -F auid&gt;=1000 -F auid!=-1 -k perm_access -a always,exit -F arch=b64 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EPERM -F auid&gt;=1000 -F auid!=-1 -k perm_access -a always,exit -F arch=b64 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EACCES -F auid&gt;=1000 -F auid!=-1 -k perm_access If the command does not return audit rules for the "creat", "open", "openat", "open_by_handle_at", "truncate", and "ftruncate" syscalls or the lines are commented out, this is a finding. Notes: For 32-bit architectures, only the 32-bit specific output lines from the commands are required. The "-k" allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20981r809522_fix

Configure the audit system to generate an audit event for any unsuccessful use of the "creat", "open", "openat", "open_by_handle_at", "truncate", and "ftruncate" system calls. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F arch=b32 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=4294967295 -k perm_access -a always,exit -F arch=b32 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=4294967295 -k perm_access -a always,exit -F arch=b64 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=4294967295 -k perm_access -a always,exit -F arch=b64 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=4294967295 -k perm_access Notes: For 32-bit architectures, only the 32-bit specific entries are required. The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. To reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the sudo command.
AU-12 - Medium - CCI-000172 - V-219263 - SV-219263r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010340
Vuln IDs
  • V-219263
  • V-100751
Rule IDs
  • SV-219263r958446_rule
  • SV-109855
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20988r305117_chk

Verify that an audit event is generated for any successful/unsuccessful use of the "sudo" command. Check the configured audit rules with the following command: # sudo auditctl -l | grep /usr/bin/sudo -a always,exit -F path=/usr/bin/sudo -F perm=x -F auid&gt;=1000 -F auid!=-1 -k priv_cmd If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20987r305118_fix

Configure the audit system to generate an audit event for any successful/unsuccessful use of the "sudo" command. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/usr/bin/sudo -F perm=x -F auid>=1000 -F auid!=4294967295 -k priv_cmd Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the sudoedit command.
AU-12 - Medium - CCI-000172 - V-219264 - SV-219264r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010341
Vuln IDs
  • V-219264
  • V-100753
Rule IDs
  • SV-219264r958446_rule
  • SV-109857
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20989r305120_chk

Verify the Ubuntu operating system generates an audit record when successful/unsuccessful attempts to use the "sudoedit" command occur. Check the configured audit rules with the following commands: # sudo auditctl -l | grep /usr/bin/sudoedit -a always,exit -F path=/usr/bin/sudoedit -F perm=x -F auid&gt;=1000 -F auid!=-1 -k priv_cmd If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20988r305121_fix

Configure the audit system to generate an audit event for any successful/unsuccessful use of the "sudoedit" command. Add or update the following rules in the "/etc/audit/rules.d/stig.rules": -a always,exit -F path=/usr/bin/sudoedit -F perm=x -F auid>=1000 -F auid!=4294967295 -k priv_cmd Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the chsh command.
AU-12 - Medium - CCI-000172 - V-219265 - SV-219265r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010342
Vuln IDs
  • V-219265
  • V-100755
Rule IDs
  • SV-219265r958446_rule
  • SV-109859
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20990r305123_chk

Verify the Ubuntu operating system generates an audit record when successful/unsuccessful attempts to use the "chsh" command. Check the configured audit rules with the following commands: # sudo auditctl -l | grep chsh -a always,exit -F path=/usr/bin/chsh -F perm=x -F auid&gt;=1000 -F auid!=-1 -k priv_cmd If the command does not return a line that matches the example or the line is commented out, this is a finding. Notes: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20989r305124_fix

Configure the audit system to generate an audit event for any successful/unsuccessful use of the "chsh" command. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/usr/bin/chsh -F perm=x -F auid>=1000 -F auid!=4294967295 -k priv_cmd Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the newgrp command.
AU-12 - Medium - CCI-000172 - V-219266 - SV-219266r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010343
Vuln IDs
  • V-219266
  • V-100757
Rule IDs
  • SV-219266r958446_rule
  • SV-109861
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20991r305126_chk

Verify the Ubuntu operating system generates an audit record when successful/unsuccessful attempts to use the "newgrp" command occur. Check the configured audit rules with the following commands: # sudo auditctl -l | grep newgrp -a always,exit -F path=/usr/bin/newgrp -F perm=x -F auid&gt;=1000 -F auid!=-1 -k priv_cmd If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20990r305127_fix

Configure the audit system to generate an audit event for any successful/unsuccessful use of the "newgrp" command. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/usr/bin/newgrp -F perm=x -F auid>=1000 -F auid!=4294967295 -k priv_cmd Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the chcon command.
AU-12 - Medium - CCI-000172 - V-219267 - SV-219267r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010344
Vuln IDs
  • V-219267
  • V-100759
Rule IDs
  • SV-219267r958446_rule
  • SV-109863
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20992r305129_chk

Verify the Ubuntu operating system generates an audit record when successful/unsuccessful attempts to use the "chcon" command occur. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep chcon -a always,exit -F path=/usr/bin/chcon -F perm=x -F auid&gt;=1000 -F auid!=-1 -k perm_chng If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20991r305130_fix

Configure the audit system to generate an audit event for any successful/unsuccessful use of the "chcon" command. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/usr/bin/chcon -F perm=x -F auid>=1000 -F auid!=4294967295 -k perm_chng Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the apparmor_parser command.
AU-12 - Medium - CCI-000172 - V-219268 - SV-219268r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010345
Vuln IDs
  • V-219268
  • V-100761
Rule IDs
  • SV-219268r958446_rule
  • SV-109865
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20993r305132_chk

Verify the Ubuntu operating system generates an audit record when successful/unsuccessful attempts to use the "apparmor_parser" command occur. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep apparmor_parser -a always,exit -F path=/sbin/apparmor_parser -F perm=x -F auid&gt;=1000 -F auid!=-1 -k perm_chng If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20992r305133_fix

Configure the audit system to generate an audit event for any successful/unsuccessful use of the "apparmor_parser" command. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/sbin/apparmor_parser -F perm=x -F auid>=1000 -F auid!=4294967295 -k perm_chng Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the setfacl command.
AU-12 - Medium - CCI-000172 - V-219269 - SV-219269r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010346
Vuln IDs
  • V-219269
  • V-100763
Rule IDs
  • SV-219269r958446_rule
  • SV-109867
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20994r305135_chk

Verify the Ubuntu operating system generates an audit record when successful/unsuccessful attempts to use the "setfacl" command occur. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep setfacl -a always,exit -F path=/usr/bin/setfacl -F perm=x -F auid&gt;=1000 -F auid!=-1 -k perm_chng If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20993r305136_fix

Configure the audit system to generate an audit event for any successful/unsuccessful use of the "setfacl" command. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/usr/bin/setfacl -F perm=x -F auid>=1000 -F auid!=4294967295 -k perm_chng Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the chacl command.
AU-12 - Medium - CCI-000172 - V-219270 - SV-219270r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010347
Vuln IDs
  • V-219270
  • V-100765
Rule IDs
  • SV-219270r958446_rule
  • SV-109869
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20995r928518_chk

Verify the Ubuntu operating system generates an audit record when successful/unsuccessful attempts to use the "chacl" command occur. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep chacl -a always,exit -F path=/usr/bin/chacl -F perm=x -F auid&gt;=1000 -F auid!=-1 -k perm_chng If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above. If the command does not return a line that matches the example or the line is commented out, this is a finding.

Fix: F-20994r305139_fix

Configure the audit system to generate an audit event for any successful/unsuccessful use of the "chacl" command. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/usr/bin/chacl -F perm=x -F auid>=1000 -F auid!=4294967295 -k perm_chng Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the passwd command.
AU-12 - Medium - CCI-000172 - V-219271 - SV-219271r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010348
Vuln IDs
  • V-219271
  • V-100767
Rule IDs
  • SV-219271r958446_rule
  • SV-109871
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20996r305141_chk

Verify that an audit event is generated for any successful/unsuccessful use of the "passwd" command. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep -w passwd -a always,exit -F path=/usr/bin/passwd -F perm=x -F auid&gt;=1000 -F auid!=-1 -k privileged-passwd If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20995r755155_fix

Configure the audit system to generate an audit event for any successful/unsuccessful uses of the "passwd" command. Add or update the following rule in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/usr/bin/passwd -F perm=x -F auid>=1000 -F auid!=4294967295 -k privileged-passwd Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the unix_update command.
AU-12 - Medium - CCI-000172 - V-219272 - SV-219272r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010349
Vuln IDs
  • V-219272
  • V-100769
Rule IDs
  • SV-219272r958446_rule
  • SV-109873
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20997r305144_chk

Verify that an audit event is generated for any successful/unsuccessful use of the "unix_update" command. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep -w unix_update -a always,exit -F path=/sbin/unix_update -F perm=x -F auid&gt;=1000 -F auid!=-1 -k privileged-unix-update If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20996r305145_fix

Configure the audit system to generate an audit event for any successful/unsuccessful uses of the "unix_update" command. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/sbin/unix_update -F perm=x -F auid>=1000 -F auid!=4294967295 -k privileged-unix-update Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the gpasswd command.
AU-12 - Medium - CCI-000172 - V-219273 - SV-219273r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010350
Vuln IDs
  • V-219273
  • V-100771
Rule IDs
  • SV-219273r958446_rule
  • SV-109875
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20998r305147_chk

Verify that an audit event is generated for any successful/unsuccessful use of the "gpasswd" command. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep -w gpasswd -a always,exit -F path=/usr/bin/gpasswd -F perm=x -F auid&gt;=1000 -F auid!=-1 -k privileged-gpasswd If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20997r305148_fix

Configure the audit system to generate an audit event for any successful/unsuccessful uses of the gpasswd command. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/usr/bin/gpasswd -F perm=x -F auid>=1000 -F auid!=4294967295 -k privileged-gpasswd Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the chage command.
AU-12 - Medium - CCI-000172 - V-219274 - SV-219274r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010351
Vuln IDs
  • V-219274
  • V-100773
Rule IDs
  • SV-219274r958446_rule
  • SV-109877
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-20999r305150_chk

Verify that an audit event is generated for any successful/unsuccessful use of the "chage" command. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep -w chage -a always,exit -F path=/usr/bin/chage -F perm=x -F auid&gt;=1000 -F auid!=-1 -k privileged-chage If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20998r305151_fix

Configure the audit system to generate an audit event for any successful/unsuccessful uses of the "chage" command. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/usr/bin/chage -F perm=x -F auid>=1000 -F auid!=4294967295 -k privileged-chage Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the usermod command.
AU-12 - Medium - CCI-000172 - V-219275 - SV-219275r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010352
Vuln IDs
  • V-219275
  • V-100775
Rule IDs
  • SV-219275r958446_rule
  • SV-109879
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-21000r305153_chk

Verify that an audit event is generated for any successful/unsuccessful use of the "usermod" command. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep -w usermod -a always,exit -F path=/usr/sbin/usermod -F perm=x -F auid&gt;=1000 -F auid!=-1 -k privileged-usermod If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-20999r305154_fix

Configure the audit system to generate an audit event for any successful/unsuccessful uses of the "usermod" command. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/usr/sbin/usermod -F perm=x -F auid>=1000 -F auid!=4294967295 -k privileged-usermod Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the crontab command.
AU-12 - Medium - CCI-000172 - V-219276 - SV-219276r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010353
Vuln IDs
  • V-219276
  • V-100917
Rule IDs
  • SV-219276r958446_rule
  • SV-110021
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-21001r305156_chk

Verify that an audit event is generated for any successful/unsuccessful use of the "crontab" command. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep -w crontab -a always,exit -F path=/usr/bin/crontab -F perm=x -F auid&gt;=1000 -F auid!=-1 -k privileged-crontab If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-21000r305157_fix

Configure the audit system to generate an audit event for any successful/unsuccessful uses of the "crontab" command. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/usr/bin/crontab -F perm=x -F auid>=1000 -F auid!=4294967295 -k privileged-crontab Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records for successful/unsuccessful uses of the pam_timestamp_check command.
AU-12 - Medium - CCI-000172 - V-219277 - SV-219277r958446_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010354
Vuln IDs
  • V-219277
  • V-100777
Rule IDs
  • SV-219277r958446_rule
  • SV-109881
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-21002r305159_chk

Verify that an audit event is generated for any successful/unsuccessful use of the "pam_timestamp_check" command. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep -w pam_timestamp_check -a always,exit -F path=/usr/sbin/pam_timestamp_check -F perm=x -F auid&gt;=1000 -F auid!=-1 -k privileged-pam_timestamp_check If the command does not return a line that matches the example or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-21001r305160_fix

Configure the audit system to generate an audit event for any successful/unsuccessful uses of the "pam_timestamp_check" command. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F path=/usr/sbin/pam_timestamp_check -F perm=x -F auid>=1000 -F auid!=4294967295 -k privileged-pam_timestamp_check Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must prevent all software from executing at higher privilege levels than users executing the software and the audit system must be configured to audit the execution of privileged functions.
AC-6 - Medium - CCI-002233 - V-219281 - SV-219281r958730_rule
RMF Control
AC-6
Severity
Medium
CCI
CCI-002233
Version
UBTU-18-010358
Vuln IDs
  • V-219281
  • V-100785
Rule IDs
  • SV-219281r958730_rule
  • SV-109889
In certain situations, software applications/programs need to execute with elevated privileges to perform required functions. However, if the privileges required for execution are at a higher level than the privileges assigned to organizational users invoking such applications/programs, those users are indirectly provided with greater privileges than assigned by the organizations. Some programs and processes are required to operate at a higher privilege level and therefore should be excluded from the organization-defined software list after review. Satisfies: SRG-OS-000326-GPOS-00126, SRG-OS-000327-GPOS-00127
Checks: C-21006r621650_chk

Verify the Ubuntu operating system audits the execution of privilege functions by auditing the "execve" system call. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep execve -a always,exit -F arch=b64 -S execve -C uid!=euid -F euid=0 -F key=execpriv -a always,exit -F arch=b64 -S execve -C gid!=egid -F egid=0 -F key=execpriv -a always,exit -F arch=b32 -S execve -C uid!=euid -F euid=0 -F key=execpriv -a always,exit -F arch=b32 -S execve -C gid!=egid -F egid=0 -F key=execpriv If the command does not return lines that match the example or the lines are commented out, this is a finding. Notes: For 32-bit architectures, only the 32-bit specific output lines from the commands are required. The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-21005r621651_fix

Configure the Ubuntu operating system to audit the execution of all privileged functions. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F arch=b64 -S execve -C uid!=euid -F euid=0 -F key=execpriv -a always,exit -F arch=b64 -S execve -C gid!=egid -F egid=0 -F key=execpriv -a always,exit -F arch=b32 -S execve -C uid!=euid -F euid=0 -F key=execpriv -a always,exit -F arch=b32 -S execve -C gid!=egid -F egid=0 -F key=execpriv Notes: For 32-bit architectures, only the 32-bit specific entries are required. The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records upon successful/unsuccessful use of unlink, unlinkat, rename, renameat, and rmdir system calls.
AU-12 - Medium - CCI-000172 - V-219287 - SV-219287r991577_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010375
Vuln IDs
  • V-219287
  • V-100797
Rule IDs
  • SV-219287r991577_rule
  • SV-109901
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter). The system call rules are loaded into a matching engine that intercepts each syscall made by all programs on the system. Therefore, it is very important to use syscall rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance is helped, however, by combining syscalls into one rule whenever possible.
Checks: C-21012r809524_chk

Verify the Ubuntu operating system generates audit records upon successful/unsuccessful use of "unlink", "unlinkat", "rename", "renameat", and "rmdir" system calls. Check the currently configured audit rules with the following command: # sudo auditctl -l | grep 'unlink\|rename\|rmdir' -a always,exit -F arch=b64 -S unlink,unlinkat,rename,renameat,rmdir -F auid&gt;=1000 -F auid!=-1 -k delete -a always,exit -F arch=b32 -S unlink,unlinkat,rename,renameat,rmdir -F auid&gt;=1000 -F auid!=-1 -k delete If the command does not return audit rules for the "unlink", "unlinkat", "rename", "renameat", and "rmdir" syscalls or the lines are commented out, this is a finding. Notes: For 32-bit architectures, only the 32-bit specific output lines from the commands are required. The "-k" allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-21011r809525_fix

Configure the audit system to generate audit events upon successful/unsuccessful use of "unlink", "unlinkat", "rename", "renameat", and "rmdir" system calls. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F arch=b64 -S unlink,unlinkat,rename,renameat,rmdir -Fauid>=1000 -F auid!=4294967295 -k delete -a always,exit -F arch=b32 -S unlink,unlinkat,rename,renameat,rmdir -F auid>=1000 -F auid!=4294967295 -k delete Notes: For 32-bit architectures, only the 32-bit specific entries are required. The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. To reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate records for successful/unsuccessful uses of init_module or finit_module syscalls.
AU-12 - Medium - CCI-000172 - V-219296 - SV-219296r991586_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010387
Vuln IDs
  • V-219296
  • V-100815
Rule IDs
  • SV-219296r991586_rule
  • SV-109919
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter). Satisfies: SRG-OS-000064-GPOS-00033
Checks: C-21021r305216_chk

Verify if the Ubuntu operating system is configured to audit the "init_module" and "finit_module" syscalls, by running the following command: # sudo auditctl -l | grep -E 'init_module|finit_module' -a always,exit -F arch=b64 -S init_module -S finit_module -F key=modules -a always,exit -F arch=b32 -S init_module -S finit_module -F key=modules If the command does not return lines that match the example or the lines are commented out, this is a finding. Notes: For 32-bit architectures, only the 32-bit specific output lines from the commands are required. The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-21020r305217_fix

Configure the audit system to generate an audit event for any use of the "init_module" or "finit_module" system calls. Add or update the following rules in the "/etc/audit/rules.d/stig.rules" file: -a always,exit -F arch=b32 -S init_module -S finit_module -F key=modules -a always,exit -F arch=b64 -S init_module -S finit_module -F key=modules Notes: For 32-bit architectures, only the 32-bit specific entries are required. The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate records for successful/unsuccessful uses of delete_module syscall and when unloading dynamic kernel modules.
AU-12 - Medium - CCI-000172 - V-219297 - SV-219297r991586_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010388
Vuln IDs
  • V-219297
  • V-100817
Rule IDs
  • SV-219297r991586_rule
  • SV-109921
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter). Satisfies: SRG-OS-000064-GPOS-00033, SRG-OS-000471-GPOS-00216
Checks: C-21022r305219_chk

Verify if the Ubuntu operating system is configured to audit the "delete_module" syscall, by running the following command: # sudo auditctl -l | egrep delete_module -a always,exit -F arch=b64 -S delete_module -F key=modules -a always,exit -F arch=b32 -S delete_module -F key=modules If the command does not return lines that match the example or the lines are commented out, this is a finding. Notes: For 32-bit architectures, only the 32-bit specific output lines from the commands are required. The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-21021r305220_fix

Configure the Ubuntu operating system to generate an audit event for any use of the delete_module system call. Add or update the following rule in the "/etc/audit/rules.d/stig.rules" file. -a always,exit -F arch=b32 -S delete_module -F key=modules -a always,exit -F arch=b64 -S delete_module -F key=modules Notes: For 32-bit architectures, only the 32-bit specific entries are required. The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records when successful/unsuccessful attempts to use modprobe command.
AU-12 - Medium - CCI-000172 - V-219298 - SV-219298r991586_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010389
Vuln IDs
  • V-219298
  • V-100819
Rule IDs
  • SV-219298r991586_rule
  • SV-109923
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-21023r305222_chk

Verify if the Ubuntu operating system is configured to audit the execution of the module management program "modprobe", by running the following command: sudo auditctl -l | grep "/sbin/modprobe" -w /sbin/modprobe -p x -k modules If the command does not return a line, or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-21022r305223_fix

Configure the Ubuntu operating system to audit the execution of the module management program "modprobe". Add or update the following rule in the "/etc/audit/rules.d/stig.rules" file. -w /sbin/modprobe -p x -k modules Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records when successful/unsuccessful attempts to use the kmod command.
AU-12 - Medium - CCI-000172 - V-219299 - SV-219299r991586_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010391
Vuln IDs
  • V-219299
  • V-100821
Rule IDs
  • SV-219299r991586_rule
  • SV-109925
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-21024r305225_chk

Verify if the Ubuntu operating system is configured to audit the execution of the module management program "kmod". Check the currently configured audit rules with the following command: # sudo auditctl -l | grep kmod -w /bin/kmod -p x -k module If the command does not return a line, or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-21023r305226_fix

Configure the Ubuntu operating system to audit the execution of the module management program "kmod". Add or update the following rule in the "/etc/audit/rules.d/stig.rules" file. -w /bin/kmod -p x -k modules Note: The "root" account must be used to view/edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

b
The Ubuntu operating system must generate audit records when successful/unsuccessful attempts to use the fdisk command.
AU-12 - Medium - CCI-000172 - V-219300 - SV-219300r991586_rule
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
UBTU-18-010392
Vuln IDs
  • V-219300
  • V-100823
Rule IDs
  • SV-219300r991586_rule
  • SV-109927
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).
Checks: C-21025r305228_chk

Verify if the Ubuntu operating system is configured to audit the execution of the partition management program "fdisk". Check the currently configured audit rules with the following command: # sudo auditctl -l | grep fdisk -w /sbin/fdisk -p x -k fdisk If the command does not return a line, or the line is commented out, this is a finding. Note: The '-k' allows for specifying an arbitrary identifier and the string after it does not need to match the example output above.

Fix: F-21024r902858_fix

Configure the Ubuntu operating system to audit the execution of the partition management program "fdisk". Add or update the following rule in the "/etc/audit/rules.d/stig.rules" file. -w /sbin/fdisk -p x -k fdisk Note: The root account must be used to view and/or edit any files in the /etc/audit/rules.d/ directory. In order to reload the rules file, issue the following command: # sudo augenrules --load

a
The Ubuntu operating system must limit the number of concurrent sessions to ten for all accounts and/or account types.
AC-10 - Low - CCI-000054 - V-219301 - SV-219301r958398_rule
RMF Control
AC-10
Severity
Low
CCI
CCI-000054
Version
UBTU-18-010400
Vuln IDs
  • V-219301
  • V-100825
Rule IDs
  • SV-219301r958398_rule
  • SV-109929
Ubuntu operating system management includes the ability to control the number of users and user sessions that utilize an operating system. Limiting the number of allowed users and sessions per user is helpful in reducing the risks related to DoS attacks. This requirement addresses concurrent sessions for information system accounts and does not address concurrent sessions by single users via multiple system accounts. The maximum number of concurrent sessions should be defined based on mission needs and the operational environment for each system.
Checks: C-21026r802365_chk

Verify that the Ubuntu operating system limits the number of concurrent sessions to ten for all accounts and/or account types by running the following command: $ grep maxlogins /etc/security/limits.conf The result must contain the following line: * hard maxlogins 10 If the "maxlogins" item is missing, or the value is not set to 10 or less, or is commented out, this is a finding.

Fix: F-21025r305232_fix

Configure the Ubuntu operating system to limit the number of concurrent sessions to ten for all accounts and/or account types. Add the following line to the top of the /etc/security/limits.conf: * hard maxlogins 10

b
The Ubuntu operating system must retain a users session lock until that user reestablishes access using established identification and authentication procedures.
AC-11 - Medium - CCI-000056 - V-219302 - SV-219302r958400_rule
RMF Control
AC-11
Severity
Medium
CCI
CCI-000056
Version
UBTU-18-010401
Vuln IDs
  • V-219302
  • V-100827
Rule IDs
  • SV-219302r958400_rule
  • SV-109931
A session lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not want to log out because of the temporary nature of the absence. The session lock is implemented at the point where session activity can be determined. Rather than be forced to wait for a period of time to expire before the user session can be locked, Ubuntu operating systems need to provide users with the ability to manually invoke a session lock so users may secure their session should the need arise for them to temporarily vacate the immediate physical vicinity.
Checks: C-21027r305234_chk

Verify the Ubuntu operation system has a graphical user interface session lock enabled. Note: If the Ubuntu operating system does not have a Graphical User Interface installed, this requirement is Not Applicable. Get the ""lock-enabled"" setting to verify if the graphical user interface session has the lock enabled with the following command: # sudo gsettings get org.gnome.desktop.screensaver lock-enabled true If "lock-enabled" is not set to "true", this is a finding.

Fix: F-21026r305235_fix

Configure the Ubuntu operating system so that it allows a user to lock the current graphical user interface session. Note: If the Ubuntu operating system does not have a Graphical User Interface installed, this requirement is Not Applicable. Set the ""lock-enabled"" setting to allow graphical user interface session locks with the following command: # sudo gsettings set org.gnome.desktop.screensaver lock-enabled true

b
The Ubuntu operating system must initiate a session lock after a 15-minute period of inactivity for all connection types.
AC-11 - Medium - CCI-000057 - V-219303 - SV-219303r958402_rule
RMF Control
AC-11
Severity
Medium
CCI
CCI-000057
Version
UBTU-18-010402
Vuln IDs
  • V-219303
  • V-100829
Rule IDs
  • SV-219303r958402_rule
  • SV-109933
A session time-out lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not log out because of the temporary nature of the absence. Rather than relying on the user to manually lock their operating system session prior to vacating the vicinity, the Ubuntu operating system need to be able to identify when a user's session has idled and take action to initiate the session lock. The session lock is implemented at the point where session activity can be determined and/or controlled.
Checks: C-21028r305237_chk

Verify the Ubuntu operating system initiates a session logout after a 15-minute period of inactivity. Check that the proper auto logout script exists with the following command: # cat /etc/profile.d/autologout.sh TMOUT=900 readonly TMOUT export TMOUT If the file "/etc/profile.d/autologout.sh" does not exist with the contents shown above, the value of "TMOUT" is greater than 900, or the timeout values are commented out, this is a finding.

Fix: F-21027r305238_fix

Configure the Ubuntu operating system to initiate a session logout after a 15-minute period of inactivity. Create a file to contain the system-wide session auto logout script (if it does not already exist) with the following command: # sudo touch /etc/profile.d/autologout.sh Add the following lines to the "/etc/profile.d/autologout.sh" script: TMOUT=900 readonly TMOUT export TMOUT

b
The Ubuntu operating system must be configured for users to directly initiate a session lock for all connection types.
AC-11 - Medium - CCI-000058 - V-219304 - SV-219304r982194_rule
RMF Control
AC-11
Severity
Medium
CCI
CCI-000058
Version
UBTU-18-010403
Vuln IDs
  • V-219304
  • V-100831
Rule IDs
  • SV-219304r982194_rule
  • SV-109935
A session lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not want to log out because of the temporary nature of the absence. The session lock is implemented at the point where session activity can be determined. Rather than be forced to wait for a period of time to expire before the user session can be locked, the Ubuntu operating system need to provide users with the ability to manually invoke a session lock so users may secure their session should the need arise for them to temporarily vacate the immediate physical vicinity. Satisfies: SRG-OS-000030-GPOS-00011, SRG-OS-000031-GPOS-00012
Checks: C-21029r305240_chk

Verify the Ubuntu operating system has the 'vlock' package installed, by running the following command: # dpkg -l | grep vlock If "vlock" is not installed, this is a finding.

Fix: F-21028r305241_fix

Install the "vlock" (if it is not already installed) package by running the following command: # sudo apt-get install vlock

b
The Ubuntu operating system must monitor remote access methods.
AC-17 - Medium - CCI-000067 - V-219306 - SV-219306r958406_rule
RMF Control
AC-17
Severity
Medium
CCI
CCI-000067
Version
UBTU-18-010410
Vuln IDs
  • V-219306
  • V-100835
Rule IDs
  • SV-219306r958406_rule
  • SV-109939
Remote access services, such as those providing remote access to network devices and information systems, which lack automated monitoring capabilities, increase risk and make remote user access management difficult at best. Remote access is access to DoD nonpublic information systems by an authorized user (or an information system) communicating through an external, non-organization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless. Automated monitoring of remote access sessions allows organizations to detect cyber attacks and also ensure ongoing compliance with remote access policies by auditing connection activities of remote access capabilities, such as Remote Desktop Protocol (RDP), on a variety of information system components (e.g., servers, workstations, notebook computers, smartphones, and tablets).
Checks: C-21031r832920_chk

Verify that the Ubuntu operating system monitors all remote access methods. Check that remote access methods are being logged by running the following command: $ grep -E -r '^(auth,authpriv\.\*|daemon\.\*)' /etc/rsyslog.* /etc/rsyslog.d/50-default.conf:auth,authpriv.* /var/log/auth.log /etc/rsyslog.d/50-default.conf:daemon.* /var/log/messages If "auth.*", "authpriv.*" or "daemon.*" are not configured to be logged in at least one of the config files, this is a finding.

Fix: F-21030r832921_fix

Configure the Ubuntu operating system to monitor all remote access methods by adding the following lines to the "/etc/rsyslog.d/50-default.conf" file: auth.*,authpriv.* /var/log/secure daemon.* /var/log/messages In order for the changes to take effect the "rsyslog" service must be restarted with the following command: $ sudo systemctl restart rsyslog.service

b
The Ubuntu operating system must implement DoD-approved encryption to protect the confidentiality of remote access sessions.
AC-17 - Medium - CCI-000068 - V-219307 - SV-219307r958408_rule
RMF Control
AC-17
Severity
Medium
CCI
CCI-000068
Version
UBTU-18-010411
Vuln IDs
  • V-219307
  • V-100837
Rule IDs
  • SV-219307r958408_rule
  • SV-109941
Without confidentiality protection mechanisms, unauthorized individuals may gain access to sensitive information via a remote access session. Remote access is access to DoD nonpublic information systems by an authorized user (or an information system) communicating through an external, non-organization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless. Encryption provides a means to secure the remote connection to prevent unauthorized access to the data traversing the remote access connection (e.g., RDP), thereby providing a degree of confidentiality. The encryption strength of a mechanism is selected based on the security categorization of the information. By specifying a cipher list with the order of ciphers being in a “strongest to weakest” orientation, the system will automatically attempt to use the strongest cipher for securing SSH connections.
Checks: C-21032r621653_chk

Verify the SSH daemon is configured to only implement DoD-approved encryption. Check the SSH daemon's current configured ciphers by running the following command: # grep -E '^Ciphers ' /etc/ssh/sshd_config Ciphers aes256-ctr,aes192-ctr, aes128-ctr If any ciphers other than "aes256-ctr", "aes192-ctr", or "aes128-ctr" are listed, the order differs from the example above, the "Ciphers" keyword is missing, or the returned line is commented out, this is a finding.

Fix: F-21031r621654_fix

Configure the Ubuntu operating system to allow the SSH daemon to only implement DoD-approved encryption. Add the following line (or modify the line to have the required value) to the "/etc/ssh/sshd_config" file (this file may be named differently or be in a different location if using a version of SSH that is provided by a third-party vendor): Ciphers aes256-ctr,aes192-ctr,aes128-ctr In order for the changes to take effect, the SSH daemon must be restarted. # sudo systemctl restart sshd.service

c
The Ubuntu operating system must enforce SSHv2 for network access to all accounts.
IA-2 - High - CCI-001941 - V-219308 - SV-219308r958494_rule
RMF Control
IA-2
Severity
High
CCI
CCI-001941
Version
UBTU-18-010412
Vuln IDs
  • V-219308
  • V-100839
Rule IDs
  • SV-219308r958494_rule
  • SV-109943
A replay attack may enable an unauthorized user to gain access to the operating system. Authentication sessions between the authenticator and the operating system validating the user credentials must not be vulnerable to a replay attack. An authentication process resists replay attacks if it is impractical to achieve a successful authentication by recording and replaying a previous authentication message. A privileged account is any information system account with authorizations of a privileged user. Techniques used to address this include protocols using nonces (e.g., numbers generated for a specific one-time use) or challenges (e.g., TLS, WS_Security). Additional techniques include time-synchronous or challenge-response one-time authenticators. Satisfies: SRG-OS-000112-GPOS-00057, SRG-OS-000113-GPOS-00058
Checks: C-21033r305252_chk

Verify that the Ubuntu operating system enforces SSH protocol 2 for network access. Check the protocol versions that SSH allows with the following command: # grep Protocol /etc/ssh/sshd_config Protocol 2 If the returned line allows for use of protocol "1", is commented out, or the line is missing, this is a finding.

Fix: F-21032r305253_fix

Configure the Ubuntu operating system to enforce SSHv2 for network access to all accounts. Add or update the following line in the "/etc/ssh/sshd_config" file: Protocol 2 Restart the ssh service. # systemctl restart sshd.service

b
The Ubuntu operating system must use strong authenticators in establishing nonlocal maintenance and diagnostic sessions.
MA-4 - Medium - CCI-000877 - V-219309 - SV-219309r958510_rule
RMF Control
MA-4
Severity
Medium
CCI
CCI-000877
Version
UBTU-18-010414
Vuln IDs
  • V-219309
  • V-100841
Rule IDs
  • SV-219309r958510_rule
  • SV-109945
Nonlocal maintenance and diagnostic activities are those activities conducted by individuals communicating through a network, either an external network (e.g., the Internet) or an internal network. Local maintenance and diagnostic activities are those activities carried out by individuals physically present at the information system or information system component and not communicating across a network connection. Typically, strong authentication requires authenticators that are resistant to replay attacks and employ multifactor authentication. Strong authenticators include, for example, PKI where certificates are stored on a token protected by a password, passphrase, or biometric.
Checks: C-21034r305255_chk

Verify the Ubuntu operating system is configured to use strong authenticators in the establishment of nonlocal maintenance and diagnostic maintenance. Check that "UsePAM" is set to yes in /etc/ssh/sshd_config: # grep UsePAM /etc/ssh/sshd_config UsePAM yes If "UsePAM" is not set to "yes", this is a finding.

Fix: F-21033r305256_fix

Configure the Ubuntu operating system to use strong authentication when establishing nonlocal maintenance and diagnostic sessions. Add or modify the following line to /etc/ssh/sshd_config UsePAM yes

b
The Ubuntu operating system must immediately terminate all network connections associated with SSH traffic after a period of inactivity.
MA-4 - Medium - CCI-000879 - V-219310 - SV-219310r982190_rule
RMF Control
MA-4
Severity
Medium
CCI
CCI-000879
Version
UBTU-18-010415
Vuln IDs
  • V-219310
  • V-100843
Rule IDs
  • SV-219310r982190_rule
  • SV-109947
Automatic session termination addresses the termination of user-initiated logical sessions in contrast to the termination of network connections that are associated with communications sessions (i.e., network disconnect). A logical session (for local, network, and remote access) is initiated whenever a user (or process acting on behalf of a user) accesses an organizational information system. Such user sessions can be terminated (and thus terminate user access) without terminating network sessions. Session termination terminates all processes associated with a user's logical session except those processes that are specifically created by the user (i.e., session owner) to continue after the session is terminated. Conditions or trigger events requiring automatic session termination can include, for example, organization-defined periods of user inactivity, targeted responses to certain types of incidents, and time-of-day restrictions on information system use. This capability is typically reserved for specific Ubuntu operating system functionality where the system owner, data owner, or organization requires additional assurance.
Checks: C-21035r305258_chk

Verify that all network connections associated with SSH traffic automatically terminate after a period of inactivity. Check that "ClientAliveCountMax" variable is set in "/etc/ssh/sshd_config" file by performing the following command: # sudo grep -i clientalivecountmax /etc/ssh/sshd_config ClientAliveCountMax 1 If "ClientAliveCountMax" is not set, or not set to "1", or is commented out, this is a finding.

Fix: F-21034r305259_fix

Configure the Ubuntu operating system to automatically terminate inactive SSH sessions after a period of inactivity. Modify or append the following line in the "/etc/ssh/sshd_config" file replacing "[Count]" with a value of 1: ClientAliveCountMax 1 In order for the changes to take effect, the SSH daemon must be restarted. # sudo systemctl restart sshd.service

b
The Ubuntu operating system must automatically terminate all network connections associated with SSH traffic at the end of the session or after 10 minutes of inactivity.
SC-10 - Medium - CCI-001133 - V-219311 - SV-219311r970703_rule
RMF Control
SC-10
Severity
Medium
CCI
CCI-001133
Version
UBTU-18-010416
Vuln IDs
  • V-219311
  • V-100845
Rule IDs
  • SV-219311r970703_rule
  • SV-109949
Automatic session termination addresses the termination of user-initiated logical sessions in contrast to the termination of network connections that are associated with communications sessions (i.e., network disconnect). A logical session (for local, network, and remote access) is initiated whenever a user (or process acting on behalf of a user) accesses an organizational information system. Such user sessions can be terminated (and thus terminate user access) without terminating network sessions. Session termination terminates all processes associated with a user's logical session except those processes that are specifically created by the user (i.e., session owner) to continue after the session is terminated. Terminating an idle session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended. In addition, quickly terminating an idle session will also free up resources committed by the managed network element. Terminating network connections associated with communications sessions includes, for example, de-allocating associated TCP/IP address/port pairs at the operating system level, and de-allocating networking assignments at the application level if multiple application sessions are using a single operating system-level network connection. This does not mean that the operating system terminates all sessions or network access; it only ends the inactive session and releases the resources associated with that session. Conditions or trigger events requiring automatic session termination can include, for example, organization-defined periods of user inactivity, targeted responses to certain types of incidents, and time-of-day restrictions on information system use. Satisfies: SRG-OS-000279-GPOS-00109
Checks: C-21036r569462_chk

Verify that all network connections associated with SSH traffic are automatically terminated at the end of the session or after 10 minutes of inactivity. Check that the "ClientAliveInterval" variable is set to a value of "600" or less by performing the following command: # sudo grep -i clientalive /etc/ssh/sshd_config ClientAliveInterval 600 If "ClientAliveInterval" does not exist, is not set to a value of "600" or less in "/etc/ssh/sshd_config", or is commented out, this is a finding.

Fix: F-21035r569463_fix

Configure the Ubuntu operating system to automatically terminate all network connections associated with SSH traffic at the end of a session or after a 10 minute period of inactivity. Modify or append the following line in the "/etc/ssh/sshd_config" file replacing "[Interval]" with a value of "600" or less: ClientAliveInterval 600 In order for the changes to take effect, the SSH daemon must be restarted. # sudo systemctl restart sshd.service

b
The Ubuntu operating system must configure the SSH daemon to only use Message Authentication Codes (MACs) employing FIPS 140-2 approved cryptographic hash algorithms to protect the integrity of nonlocal maintenance and diagnostic communications.
AC-17 - Medium - CCI-001453 - V-219312 - SV-219312r991554_rule
RMF Control
AC-17
Severity
Medium
CCI
CCI-001453
Version
UBTU-18-010417
Vuln IDs
  • V-219312
  • V-100847
Rule IDs
  • SV-219312r991554_rule
  • SV-109951
Without cryptographic integrity protections, information can be altered by unauthorized users without detection. Nonlocal maintenance and diagnostic activities are those activities conducted by individuals communicating through a network, either an external network (e.g., the Internet) or an internal network. Local maintenance and diagnostic activities are those activities carried out by individuals physically present at the information system or information system component and not communicating across a network connection. Remote access (e.g., RDP) is access to DoD nonpublic information systems by an authorized user (or an information system) communicating through an external, non-organization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless. Cryptographic mechanisms used for protecting the integrity of information include, for example, signed hash functions using asymmetric cryptography enabling distribution of the public key to verify the hash information while maintaining the confidentiality of the secret key used to generate the hash. Satisfies: SRG-OS-000250-GPOS-00093, SRG-OS-000393-GPOS-00173, SRG-OS-000394-GPOS-00174
Checks: C-21037r621656_chk

Verify the Ubuntu operating system configures the SSH daemon to only use Message Authentication Codes (MACs) that employ FIPS 140-2 approved ciphers. Check that the SSH daemon is configured to only use MACs that employ FIPS 140-2 approved ciphers with the following command: # sudo grep -i macs /etc/ssh/sshd_config MACs hmac-sha2-512,hmac-sha2-256 If any ciphers other than "hmac-sha2-512" or "hmac-sha2-256" are listed, the order differs from the example above, or the returned line is commented out, this is a finding.

Fix: F-21036r621657_fix

Configure the Ubuntu operating system to allow the SSH daemon to only use Message Authentication Codes (MACs) that employ FIPS 140-2 approved ciphers. Add the following line (or modify the line to have the required value) to the "/etc/ssh/sshd_config" file (this file may be named differently or be in a different location if using a version of SSH that is provided by a third-party vendor): MACs hmac-sha2-512,hmac-sha2-256 In order for the changes to take effect, reload the SSH daemon. # sudo systemctl reload sshd.service

c
The Ubuntu operating system must use SSH to protect the confidentiality and integrity of transmitted information unless otherwise protected by alternative physical safeguards, such as, at a minimum, a Protected Distribution System (PDS).
SC-8 - High - CCI-002418 - V-219313 - SV-219313r958908_rule
RMF Control
SC-8
Severity
High
CCI
CCI-002418
Version
UBTU-18-010420
Vuln IDs
  • V-219313
  • V-100849
Rule IDs
  • SV-219313r958908_rule
  • SV-109953
Without protection of the transmitted information, confidentiality and integrity may be compromised because unprotected communications can be intercepted and either read or altered. This requirement applies to both internal and external networks and all types of information system components from which information can be transmitted (e.g., servers, mobile devices, notebook computers, printers, copiers, scanners, and facsimile machines). Communication paths outside the physical protection of a controlled boundary are exposed to the possibility of interception and modification. Protecting the confidentiality and integrity of organizational information can be accomplished by physical means (e.g., employing physical distribution systems) or by logical means (e.g., employing cryptographic techniques). If physical means of protection are employed, then logical means (cryptography) do not have to be employed, and vice versa. Alternative physical protection measures include PDS. PDSs are used to transmit unencrypted classified National Security Information (NSI) through an area of lesser classification or control. Since the classified NSI is unencrypted, the PDS must provide adequate electrical, electromagnetic, and physical safeguards to deter exploitation. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188, SRG-OS-000425-GPOS-00189, SRG-OS-000426-GPOS-00190
Checks: C-21038r305267_chk

Check that the ssh package is installed with the following command: # sudo dpkg -l | grep openssh ii openssh-client 1:7.6p1-4ubuntu0.1 amd64 secure shell (SSH) client, for secure access to remote machines ii openssh-server 1:7.6p1-4ubuntu0.1 amd64 secure shell (SSH) server, for secure access from remote machines ii openssh-sftp-server 1:7.6p1-4ubuntu0.1 amd64 secure shell (SSH) sftp server module, for SFTP access from remote machines If the "openssh" server package is not installed, this is a finding. Check that the "sshd.service" is loaded and active with the following command: # sudo systemctl status sshd.service | egrep -i "(active|loaded)" Loaded: loaded (/lib/systemd/system/ssh.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2019-01-24 22:52:58 UTC; 1 weeks 3 days ago If "sshd.service" is not active or loaded, this is a finding.

Fix: F-21037r305268_fix

Install the "ssh" meta-package on the system with the following command: # sudo apt install ssh Enable the "ssh" service to start automatically on reboot with the following command: # sudo systemctl enable sshd.service Ensure that the "ssh" service is running. # sudo systemctl start sshd.service

c
The Ubuntu operating system must not allow unattended or automatic login via ssh.
CM-6 - High - CCI-000366 - V-219314 - SV-219314r991591_rule
RMF Control
CM-6
Severity
High
CCI
CCI-000366
Version
UBTU-18-010424
Vuln IDs
  • V-219314
  • V-100851
Rule IDs
  • SV-219314r991591_rule
  • SV-109955
Failure to restrict system access to authenticated users negatively impacts Ubuntu operating system security.
Checks: C-21039r305270_chk

Verify that unattended or automatic login via ssh is disabled. Check that unattended or automatic login via ssh is disabled with the following command: # egrep '(Permit(.*?)(Passwords|Environment))' /etc/ssh/sshd_config PermitEmptyPasswords no PermitUserEnvironment no If "PermitEmptyPasswords" or "PermitUserEnvironment" keywords are not set to "no", are missing completely, or they are commented out, this is a finding.

Fix: F-21038r305271_fix

Configure the Ubuntu operating system to allow the SSH daemon to not allow unattended or automatic login to the system. Add or edit the following lines in the "/etc/ssh/sshd_config" file: PermitEmptyPasswords no PermitUserEnvironment no In order for the changes to take effect, the SSH daemon must be restarted. # sudo systemctl restart sshd.service

b
The Ubuntu operating system, for PKI-based authentication, must validate certificates by constructing a certification path (which includes status information) to an accepted trust anchor.
IA-5 - Medium - CCI-000185 - V-219315 - SV-219315r958448_rule
RMF Control
IA-5
Severity
Medium
CCI
CCI-000185
Version
UBTU-18-010425
Vuln IDs
  • V-219315
  • V-100853
Rule IDs
  • SV-219315r958448_rule
  • SV-109957
Without path validation, an informed trust decision by the relying party cannot be made when presented with any certificate not already explicitly trusted. A trust anchor is an authoritative entity represented via a public key and associated data. It is used in the context of public key infrastructures, X.509 digital certificates, and DNSSEC. When there is a chain of trust, usually the top entity to be trusted becomes the trust anchor; it can be, for example, a Certification Authority (CA). A certification path starts with the subject certificate and proceeds through a number of intermediate certificates up to a trusted root certificate, typically issued by a trusted CA. This requirement verifies that a certification path to an accepted trust anchor is used for certificate validation and that the path includes status information. Path validation is necessary for a relying party to make an informed trust decision when presented with any certificate not already explicitly trusted. Status information for certification paths includes certificate revocation lists or online certificate status protocol responses. Validation of the certificate status information is out of scope for this requirement. Satisfies: SRG-OS-000066-GPOS-00034, SRG-OS-000384-GPOS-00167
Checks: C-21040r305273_chk

Verify the Ubuntu operating system, for PKI-based authentication, had valid certificates by constructing a certification path to an accepted trust anchor. Check which pkcs11 module is being used via the use_pkcs11_module in /etc/pam_pkcs11/pam_pkcs11.conf and then ensure "ca" is enabled in "cert_policy" with the following command: # sudo grep use_pkcs11_module /etc/pam_pkcs11/pam_pkcs11.conf | awk '/pkcs11_module opensc {/,/}/' /etc/pam_pkcs11/pam_pkcs11.conf | grep cert_policy | grep ca cert_policy = ca,signature,ocsp_on; If "cert_policy" is not set to "ca", or the line is commented out, this is a finding.

Fix: F-21039r305274_fix

Configure the Ubuntu operating system, for PKI-based authentication, to validate certificates by constructing a certification path to an accepted trust anchor. Determine which pkcs11 module is being used via the use_pkcs11_module in /etc/pam_pkcs11/pam_pkcs11.conf and ensure "ca" is enabled in "cert_policy". Add or update the "cert_policy" to ensure "ca" is enabled: cert_policy = ca,signature,ocsp_on; If the system is missing an "/etc/pam_pkcs11/" directory and an "/etc/pam_pkcs11/pam_pkcs11.conf", find an example to copy into place and modify accordingly at "/usr/share/doc/libpam-pkcs11/examples/pam_pkcs11.conf.example.gz".

c
The Ubuntu operating system must map the authenticated identity to the user or group account for PKI-based authentication.
IA-5 - High - CCI-000187 - V-219316 - SV-219316r958452_rule
RMF Control
IA-5
Severity
High
CCI
CCI-000187
Version
UBTU-18-010426
Vuln IDs
  • V-219316
  • V-100855
Rule IDs
  • SV-219316r958452_rule
  • SV-109959
Without mapping the certificate used to authenticate to the user account, the ability to determine the identity of the individual user or group will not be available for forensic analysis.
Checks: C-21041r880890_chk

Verify the Ubuntu operating system has the "libpam-pkcs11" package installed, by running the following command: # dpkg -l | grep libpam-pkcs11 If "libpam-pkcs11" is not installed, this is a finding. Check if use_mappers is set to pwent in /etc/pam_pkcs11/pam_pkcs11.conf file # grep use_mappers /etc/pam_pkcs11/pam_pkcs11.conf use_mappers = pwent If "use_mappers" is not found, or is not set to "pwent", this is a finding.

Fix: F-21040r305277_fix

Install libpam-pkcs11 package on the system. Set use_mappers=pwent in /etc/pam_pkcs11/pam_pkcs11.conf If the system is missing an "/etc/pam_pkcs11/" directory and an "/etc/pam_pkcs11/pam_pkcs11.conf", find an example to copy into place and modify accordingly at "/usr/share/doc/libpam-pkcs11/examples/pam_pkcs11.conf.example.gz".

b
The Ubuntu operating system must implement smart card logins for multifactor authentication for access to accounts.
IA-2 - Medium - CCI-000765 - V-219317 - SV-219317r958484_rule
RMF Control
IA-2
Severity
Medium
CCI
CCI-000765
Version
UBTU-18-010427
Vuln IDs
  • V-219317
  • V-100857
Rule IDs
  • SV-219317r958484_rule
  • SV-109961
Without the use of multifactor authentication, the ease of access to privileged functions is greatly increased. Multifactor authentication requires using two or more factors to achieve authentication. Factors include: 1) something a user knows (e.g., password/PIN); 2) something a user has (e.g., cryptographic identification device, token); and 3) something a user is (e.g., biometric). A privileged account is defined as an information system account with authorizations of a privileged user. Network access is defined as access to an information system by a user (or a process acting on behalf of a user) communicating through a network (e.g., local area network, wide area network, or the internet). The DOD CAC with DOD-approved PKI is an example of multifactor authentication. Satisfies: SRG-OS-000105-GPOS-00052, SRG-OS-000106-GPOS-00053, SRG-OS-000107-GPOS-00054, SRG-OS-000108-GPOS-00055, SRG-OS-000377-GPOS-00162
Checks: C-21042r305279_chk

Verify the Ubuntu operating system uses multifactor authentication for local access to accounts. Check that the "pam_pkcs11.so" option is configured in the "/etc/pam.d/common-auth" file with the following command: # grep pam_pkcs11.so /etc/pam.d/common-auth auth [success=2 default=ignore] pam_pkcs11.so If "pam_pkcs11.so" is not set in "/etc/pam.d/common-auth", this is a finding.

Fix: F-21041r951456_fix

Configure the Ubuntu operating system to use multifactor authentication for local access to accounts. Add or update the following line in "/etc/pam.d/common-auth", placing it above any lines containing "pam_unix.so": auth [success=2 default=ignore] pam_pkcs11.so

b
The Ubuntu operating system must implement multifactor authentication for remote access to privileged accounts in such a way that one of the factors is provided by a device separate from the system gaining access.
IA-2 - Medium - CCI-001948 - V-219318 - SV-219318r982216_rule
RMF Control
IA-2
Severity
Medium
CCI
CCI-001948
Version
UBTU-18-010431
Vuln IDs
  • V-219318
  • V-100859
Rule IDs
  • SV-219318r982216_rule
  • SV-109963
Using an authentication device, such as a CAC or token that is separate from the information system, ensures that even if the information system is compromised, that compromise will not affect credentials stored on the authentication device. Multifactor solutions that require devices separate from information systems gaining access include, for example, hardware tokens providing time-based or challenge-response authenticators and smart cards such as the U.S. Government Personal Identity Verification card and the DoD Common Access Card. A privileged account is defined as an information system account with authorizations of a privileged user. Remote access is access to DoD nonpublic information systems by an authorized user (or an information system) communicating through an external, non-organization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless. This requirement only applies to components where this is specific to the function of the device or has the concept of an organizational user (e.g., VPN, proxy capability). This does not apply to authentication for the purpose of configuring the device itself (management). Requires further clarification from NIST.
Checks: C-21043r305282_chk

Verify the Ubuntu operating system has the packages required for multifactor authentication installed. Check for the presence of the packages required to support multifactor authentication with the following commands: # dpkg -l | grep libpam-pkcs11 ii libpam-pkcs11 0.6.8-4 amd64 Fully featured PAM module for using PKCS#11 smart cards If the "libpam-pkcs11" package is not installed, this is a finding.

Fix: F-21042r305283_fix

Configure the Ubuntu operating system to implement multifactor authentication by installing the required packages. Install the "libpam-pkcs11" package on the system with the following command: # sudo apt install libpam-pkcs11

b
The Ubuntu operating system must accept Personal Identity Verification (PIV) credentials.
IA-2 - Medium - CCI-001953 - V-219319 - SV-219319r958816_rule
RMF Control
IA-2
Severity
Medium
CCI
CCI-001953
Version
UBTU-18-010432
Vuln IDs
  • V-219319
  • V-100861
Rule IDs
  • SV-219319r958816_rule
  • SV-109965
The use of PIV credentials facilitates standardization and reduces the risk of unauthorized access. DoD has mandated the use of the CAC to support identity management and personal authentication for systems covered under Homeland Security Presidential Directive (HSPD) 12, as well as making the CAC a primary component of layered protection for national security systems.
Checks: C-21044r305285_chk

Verify the Ubuntu operating system accepts Personal Identity Verification (PIV) credentials. Check that the "opensc-pcks11" package is installed on the system with the following command: # dpkg -l | grep opensc-pkcs11 ii opensc-pkcs11:amd64 0.15.0-1Ubuntu1 amd64 Smart card utilities with support for PKCS#15 compatible cards If the "opensc-pcks11" package is not installed, this is a finding.

Fix: F-21043r305286_fix

Configure the Ubuntu operating system to accept Personal Identity Verification (PIV) credentials. Install the "opensc-pkcs11" package using the following command: # sudo apt-get install opensc-pkcs11

b
The Ubuntu operating system must implement certificate status checking for multifactor authentication.
IA-2 - Medium - CCI-001954 - V-219320 - SV-219320r958818_rule
RMF Control
IA-2
Severity
Medium
CCI
CCI-001954
Version
UBTU-18-010434
Vuln IDs
  • V-219320
  • V-100863
Rule IDs
  • SV-219320r958818_rule
  • SV-109967
The use of PIV credentials facilitates standardization and reduces the risk of unauthorized access. DoD has mandated the use of the CAC to support identity management and personal authentication for systems covered under Homeland Security Presidential Directive (HSPD) 12, as well as making the CAC a primary component of layered protection for national security systems.
Checks: C-21045r305288_chk

Verify the Ubuntu operating system implements certificate status checking for multifactor authentication. Check that certificate status checking for multifactor authentication is implemented with the following command: # sudo grep use_pkcs11_module /etc/pam_pkcs11/pam_pkcs11.conf | awk '/pkcs11_module opensc {/,/}/' /etc/pam_pkcs11/pam_pkcs11.conf | grep cert_policy | grep ocsp_on cert_policy = ca,signature,ocsp_on; If "cert_policy" is not set to "ocsp_on", or the line is commented out, this is a finding.

Fix: F-21044r305289_fix

Configure the Ubuntu operating system to certificate status checking for multifactor authentication. Modify all of the cert_policy lines in "/etc/pam_pkcs11/pam_pkcs11.conf" to include ocsp_on.

b
The Ubuntu operating system must only allow the use of DoD PKI-established certificate authorities for verification of the establishment of protected sessions.
SC-23 - Medium - CCI-002470 - V-219321 - SV-219321r958868_rule
RMF Control
SC-23
Severity
Medium
CCI
CCI-002470
Version
UBTU-18-010436
Vuln IDs
  • V-219321
  • V-100865
Rule IDs
  • SV-219321r958868_rule
  • SV-109969
Untrusted Certificate Authorities (CA) can issue certificates, but they may be issued by organizations or individuals that seek to compromise DoD systems or by organizations with insufficient security controls. If the CA used for verifying the certificate is not a DoD-approved CA, trust of this CA has not been established. The DoD will only accept PKI-certificates obtained from a DoD-approved internal or external certificate authority. Reliance on CAs for the establishment of secure sessions includes, for example, the use of SSL/TLS certificates.
Checks: C-21046r305291_chk

Verify the directory containing the root certificates for the Ubuntu operating system only contains certificate files for DoD PKI-established certificate authorities by iterating over all files in the '/etc/ssl/certs' directory and checking if, at least one, has the subject matching "DOD ROOT CA". If none is found, this is a finding.

Fix: F-21045r305292_fix

Add at least one DOD certificate authority to the '/usr/local/share/ca-certificates' directory, then run the 'update-ca-certificates' command.

a
Pam_Apparmor must be configured to allow system administrators to pass information to any other Ubuntu operating system administrator or user, change security attributes, and to confine all non-privileged users from executing functions to include disabling, circumventing, or altering implemented security safeguards/countermeasures.
AC-3 - Low - CCI-002165 - V-219322 - SV-219322r958702_rule
RMF Control
AC-3
Severity
Low
CCI
CCI-002165
Version
UBTU-18-010437
Vuln IDs
  • V-219322
  • V-100867
Rule IDs
  • SV-219322r958702_rule
  • SV-109971
When discretionary access control policies are implemented, subjects are not constrained with regard to what actions they can take with information for which they have already been granted access. Thus, subjects that have been granted access to information are not prevented from passing (i.e., the subjects have the discretion to pass) the information to other subjects or objects. A subject that is constrained in its operation by Mandatory Access Control policies is still able to operate under the less rigorous constraints of this requirement. Thus, while Mandatory Access Control imposes constraints preventing a subject from passing information to another subject operating at a different sensitivity level, this requirement permits the subject to pass the information to any subject at the same sensitivity level. The policy is bounded by the information system boundary. Once the information is passed outside the control of the information system, additional means may be required to ensure the constraints remain in effect. While the older, more traditional definitions of discretionary access control require identity-based access control, that limitation is not required for this use of discretionary access control. Satisfies: SRG-OS-000312-GPOS-00122, SRG-OS-000312-GPOS-00123, SRG-OS-000312-GPOS-00124, SRG-OS-000324-GPOS-0012
Checks: C-21047r305294_chk

Verify that the Ubuntu operating system is configured to allow system administrators to pass information to any other Ubuntu operating system administrator or user. Check that "Pam_Apparmor" is installed on the system with the following command: # dpkg -l | grep -i apparmor ii libpam-apparmor 2.10.95-0Ubuntu2.6 If the "Pam_Apparmor" package is not installed, this is a finding. Check that the "AppArmor" daemon is running with the following command: # systemctl status apparmor.service | grep -i active If something other than "Active: active" is returned, this is a finding. Note: Pam_Apparmor must have properly configured profiles. All configurations will be based on the actual system setup and organization. See the "Pam_Apparmor" documentation for more information on configuring profiles.

Fix: F-21046r305295_fix

Configure the Ubuntu operating system to allow system administrators to pass information to any other Ubuntu operating system administrator or user. Install "Pam_Apparmor" (if it is not installed) with the following command: # sudo apt-get install libpam-apparmor Enable/Activate "Apparmor" (if it is not already active) with the following command: # sudo systemctl enable apparmor.service Start "Apparmor" with the following command: # sudo systemctl start apparmor.service Note: Pam_Apparmor must have properly configured profiles. All configurations will be based on the actual system setup and organization. See the "Pam_Apparmor" documentation for more information on configuring profiles.

b
The Ubuntu operating system must be configured to use AppArmor.
CM-7 - Medium - CCI-001764 - V-219323 - SV-219323r958804_rule
RMF Control
CM-7
Severity
Medium
CCI
CCI-001764
Version
UBTU-18-010441
Vuln IDs
  • V-219323
  • V-100869
Rule IDs
  • SV-219323r958804_rule
  • SV-109973
Control of program execution is a mechanism used to prevent execution of unauthorized programs. Some operating systems may provide a capability that runs counter to the mission or provides users with functionality that exceeds mission requirements. This includes functions and services installed at the operating system level. Some of the programs, installed by default, may be harmful or may not be necessary to support essential organizational operations (e.g., key missions, functions). Removal of executable programs is not always possible; therefore, establishing a method of preventing program execution is critical to maintaining a secure system baseline. Methods for complying with this requirement include restricting execution of programs in certain environments, while preventing execution in other environments; or limiting execution of certain program functionality based on organization-defined criteria (e.g., privileges, subnets, sandboxed environments, or roles).
Checks: C-21048r305297_chk

Verify the operating system prevents program execution in accordance with local policies. Check that apparmor is installed and active by running the following command: # dpkg -l | grep apparmor If the "apparmor" package is not installed, this is a finding. #systemctl is-active apparmor.service active If "active" is not returned, this is a finding. #systemctl is-enabled apparmor.service enabled If "enabled" is not returned, then this is a finding.

Fix: F-21047r305298_fix

Install "Apparmor" (if it is not installed) with the following command: # sudo apt-get install apparmor # sudo systemctl enable apparmor.service Start "Apparmor" with the following command: # sudo systemctl start apparmor.service Note: Apparmor must have properly configured profiles for applications and home directories. All configurations will be based on the actual system setup and organization and normally are on a per role basis. See the "Apparmor" documentation for more information on configuring profiles.

b
The Apparmor module must be configured to employ a deny-all, permit-by-exception policy to allow the execution of authorized software programs and limit the ability of non-privileged users to grant other users direct access to the contents of their home directories/folders.
CM-7 - Medium - CCI-001774 - V-219324 - SV-219324r958808_rule
RMF Control
CM-7
Severity
Medium
CCI
CCI-001774
Version
UBTU-18-010442
Vuln IDs
  • V-219324
  • V-100871
Rule IDs
  • SV-219324r958808_rule
  • SV-109975
Control of program execution is a mechanism used to prevent execution of unauthorized programs. Some operating systems may provide a capability that runs counter to the mission or provides users with functionality that exceeds mission requirements. This includes functions and services installed at the operating system level. Some of the programs, installed by default, may be harmful or may not be necessary to support essential organizational operations (e.g., key missions, functions). Removal of executable programs is not always possible; therefore, establishing a method of preventing program execution is critical to maintaining a secure system baseline. Methods for complying with this requirement include restricting execution of programs in certain environments, while preventing execution in other environments; or limiting execution of certain program functionality based on organization-defined criteria (e.g., privileges, subnets, sandboxed environments, or roles).
Checks: C-21049r305300_chk

Verify that the Ubuntu operating system is configured to employ a deny-all, permit-by-exception policy to allow the execution of authorized software programs and access to user home directories. Check that "Apparmor" is configured to employ application whitelisting and home directory access control with the following command: # sudo apparmor_status apparmor module is loaded. 17 profiles are loaded. 17 profiles are in enforce mode. /sbin/dhclient /usr/bin/lxc-start ... 0 processes are in complain mode. 0 processes are unconfined but have a profile defined. If the defined profiles do not match the organization's list of authorized software, this is a finding.

Fix: F-21048r305301_fix

Configure the Ubuntu operating system to employ a deny-all, permit-by-exception policy to allow the execution of authorized software programs. Install "Apparmor" (if it is not installed) with the following command: # sudo apt-get install apparmor Enable "Apparmor" (if it is not already active) with the following command: # sudo systemctl enable apparmor.service Start "Apparmor" with the following command: # sudo systemctl start apparmor.service Note: Apparmor must have properly configured profiles for applications and home directories. All configurations will be based on the actual system setup and organization and normally are on a per role basis. See the "Apparmor" documentation for more information on configuring profiles.

b
The Ubuntu operating system must uniquely identify interactive users.
IA-2 - Medium - CCI-000764 - V-219325 - SV-219325r958482_rule
RMF Control
IA-2
Severity
Medium
CCI
CCI-000764
Version
UBTU-18-010444
Vuln IDs
  • V-219325
  • V-100873
Rule IDs
  • SV-219325r958482_rule
  • SV-109977
To assure accountability and prevent unauthenticated access, organizational users must be identified and authenticated to prevent potential misuse and compromise of the system. Organizational users include organizational employees or individuals the organization deems to have equivalent status of employees (e.g., contractors). Organizational users (and processes acting on behalf of users) must be uniquely identified and authenticated to all accesses, except for the following: 1) Accesses explicitly identified and documented by the organization. Organizations document specific user actions that can be performed on the information system without identification or authentication; and 2) Accesses that occur through authorized use of group authenticators without individual authentication. Organizations may require unique identification of individuals in group accounts (e.g., shared privilege accounts) or for detailed accountability of individual activity. Satisfies: SRG-OS-000104-GPOS-00051, SRG-OS-000121-GPOS-00062
Checks: C-21050r305303_chk

Verify that the Ubuntu operating system contains no duplicate User IDs (UIDs) for interactive users. Check that the Ubuntu operating system contains no duplicate UIDs for interactive users with the following command: # awk -F ":" 'list[$3]++{print $1, $3}' /etc/passwd If output is produced, and the accounts listed are interactive user accounts, this is a finding.

Fix: F-21049r305304_fix

Edit the file "/etc/passwd" and provide each interactive user account that has a duplicate User ID (UID) with a unique UID.

b
The Ubuntu operating system must disable account identifiers (individuals, groups, roles, and devices) after 35 days of inactivity.
IA-4 - Medium - CCI-000795 - V-219326 - SV-219326r982189_rule
RMF Control
IA-4
Severity
Medium
CCI
CCI-000795
Version
UBTU-18-010445
Vuln IDs
  • V-219326
  • V-100875
Rule IDs
  • SV-219326r982189_rule
  • SV-109979
Inactive identifiers pose a risk to systems and applications because attackers may exploit an inactive identifier and potentially obtain undetected access to the system. Owners of inactive accounts will not notice if unauthorized access to their user account has been obtained. Ubuntu operating systems need to track periods of inactivity and disable application identifiers after 35 days of inactivity.
Checks: C-21051r305306_chk

Verify the account identifiers (individuals, groups, roles, and devices) are disabled after 35 days of inactivity with the following command: Check the account inactivity value by performing the following command: # sudo grep INACTIVE /etc/default/useradd INACTIVE=35 If "INACTIVE" is not set to a value 0&lt;[VALUE]&lt;=35, or is commented out, this is a finding.

Fix: F-21050r928520_fix

Configure the Ubuntu operating system to disable account identifiers after 35 days of inactivity since the password expiration. Run the following command to change the configuration for adduser: # sudo useradd -D -f 35 Note: DoD recommendation is 35 days, but a lower value is acceptable. The value "0" will disable the account immediately after the password expires.

a
The Ubuntu operating system must automatically expire temporary accounts within 72 hours.
AC-2 - Low - CCI-001682 - V-219327 - SV-219327r958508_rule
RMF Control
AC-2
Severity
Low
CCI
CCI-001682
Version
UBTU-18-010447
Vuln IDs
  • V-219327
  • V-100877
Rule IDs
  • SV-219327r958508_rule
  • SV-109981
Temporary accounts are privileged or nonprivileged accounts that are established during pressing circumstances, such as new software or hardware configuration or an incident response, where the need for prompt account activation requires bypassing normal account authorization procedures. If any inactive temporary accounts are left enabled on the system and are not either manually removed or automatically expired within 72 hours, the security posture of the system will be degraded and exposed to exploitation by unauthorized users or insider threat actors. Temporary accounts are different from emergency accounts. Emergency accounts, also known as "last resort" or "break glass" accounts, are local logon accounts enabled on the system for emergency use by authorized system administrators to manage a system when standard logon methods are failing or not available. Emergency accounts are not subject to manual removal or scheduled expiration requirements. The automatic expiration of temporary accounts may be extended as needed by the circumstances but it must not be extended indefinitely. A documented permanent account should be established for privileged users who need long-term maintenance accounts.
Checks: C-21052r902855_chk

Verify temporary accounts have been provisioned with an expiration date of 72 hours. For every existing temporary account, run the following command to obtain its account expiration information: $ sudo chage -l &lt;temporary_account_name&gt; | grep -i "account expires" Verify each of these accounts has an expiration date set within 72 hours. If any temporary accounts have no expiration date set or do not expire within 72 hours, this is a finding.

Fix: F-21051r902856_fix

Configure the operating system to expire temporary accounts after 72 hours with the following command: $ sudo chage -E $(date -d +3days +%Y-%m-%d) <temporary_account_name>

b
The Ubuntu operating system default filesystem permissions must be defined in such a way that all authenticated users can only read and modify their own files.
CM-6 - Medium - CCI-000366 - V-219328 - SV-219328r991590_rule
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
UBTU-18-010448
Vuln IDs
  • V-219328
  • V-100879
Rule IDs
  • SV-219328r991590_rule
  • SV-109983
Setting the most restrictive default permissions ensures that when new accounts are created they do not have unnecessary access.
Checks: C-21053r305312_chk

Verify the Ubuntu operating system defines default permissions for all authenticated users in such a way that the user can only read and modify their own files. Check that the Ubuntu operating system defines default permissions for all authenticated users with the following command: # grep -i "umask" /etc/login.defs UMASK 077 If the "UMASK" variable is set to "000", this is a finding with the severity raised to a CAT I. If the value of "UMASK" is not set to "077", "UMASK" is commented out or "UMASK" is missing completely, this is a finding.

Fix: F-21052r305313_fix

Configure the system to define the default permissions for all authenticated users in such a way that the user can only read and modify their own files. Edit the "UMASK" parameter in the "/etc/login.defs" file to match the example below: UMASK 077

b
The Ubuntu operating system must provision temporary user accounts with an expiration time of 72 hours or less.
AC-2 - Medium - CCI-000016 - V-219329 - SV-219329r958364_rule
RMF Control
AC-2
Severity
Medium
CCI
CCI-000016
Version
UBTU-18-010449
Vuln IDs
  • V-219329
  • V-100881
Rule IDs
  • SV-219329r958364_rule
  • SV-109985
If temporary user accounts remain active when no longer needed or for an excessive period, these accounts may be used to gain unauthorized access. To mitigate this risk, automated termination of all temporary accounts must be set upon account creation. Temporary accounts are established as part of normal account activation procedures when there is a need for short-term accounts without the demand for immediacy in account activation. If temporary accounts are used, the Ubuntu operating system must be configured to automatically terminate these types of accounts after a DoD-defined time period of 72 hours. To address access requirements, the Ubuntu operating system may be integrated with enterprise-level authentication/access mechanisms that meet or exceed access control policy requirements.
Checks: C-21054r305315_chk

Verify the Ubuntu operating system expires temporary user accounts within 72 hours or less. For every existing temporary account, run the following command to obtain its account expiration information. # sudo chage -l system_account_name | grep expires Password expires : Aug 07, 2019 Account expires : Aug 07, 2019 Verify each of these accounts has an expiration date set within 72 hours of accounts' creation. If any temporary account does not expire within 72 hours of that account's creation, this is a finding.

Fix: F-21053r305316_fix

If a temporary account must be created configure the system to terminate the account after a 72 hour time period with the following command to set an expiration date on it. Substitute "system_account_name" with the account to be created. # sudo chage -E $(date -d "+3 days" +%F) system_account_name

b
The Ubuntu operating system must be configured to use TCP syncookies.
SC-5 - Medium - CCI-001095 - V-219330 - SV-219330r958528_rule
RMF Control
SC-5
Severity
Medium
CCI
CCI-001095
Version
UBTU-18-010500
Vuln IDs
  • V-219330
  • V-100883
Rule IDs
  • SV-219330r958528_rule
  • SV-109987
DoS is a condition when a resource is not available for legitimate users. When this occurs, the organization either cannot accomplish its mission or must operate at degraded capacity. Managing excess capacity ensures that sufficient capacity is available to counter flooding attacks. Employing increased capacity and service redundancy may reduce the susceptibility to some DoS attacks. Managing excess capacity may include, for example, establishing selected usage priorities, quotas, or partitioning.
Checks: C-21055r305318_chk

Verify the Ubuntu operating system is configured to use TCP syncookies. Check the value of TCP syncookies with the following command: # sysctl net.ipv4.tcp_syncookies net.ipv4.tcp_syncookies = 1 If the value is not "1", this is a finding. Check the saved value of TCP syncookies with the following command: # sudo grep -i net.ipv4.tcp_syncookies /etc/sysctl.conf /etc/sysctl.d/* | grep -v '#' If no output is returned, this is a finding.

Fix: F-21054r305319_fix

Configure the Ubuntu operating system to use TCP syncookies, by running the following command: # sudo sysctl -w net.ipv4.tcp_syncookies=1 If "1" is not the system's default value then add or update the following line in "/etc/sysctl.conf": net.ipv4.tcp_syncookies = 1

b
The Ubuntu operating system must, for networked systems, compare internal information system clocks at least every 24 hours with a server which is synchronized to one of the redundant United States Naval Observatory (USNO) time servers, or a time server designated for the appropriate DoD network (NIPRNet/SIPRNet), and/or the Global Positioning System (GPS).
AU-8 - Medium - CCI-001891 - V-219331 - SV-219331r982208_rule
RMF Control
AU-8
Severity
Medium
CCI
CCI-001891
Version
UBTU-18-010501
Vuln IDs
  • V-219331
  • V-100885
Rule IDs
  • SV-219331r982208_rule
  • SV-109989
Inaccurate time stamps make it more difficult to correlate events and can lead to an inaccurate analysis. Determining the correct time a particular event occurred on a system is critical when conducting forensic analysis and investigating system events. Sources outside the configured acceptable allowance (drift) may be inaccurate. Synchronizing internal information system clocks provides uniformity of time stamps for information systems with multiple system clocks and systems connected over a network. Organizations should consider endpoints that may not have regular access to the authoritative time server (e.g., mobile, teleworking, and tactical endpoints).
Checks: C-21056r808466_chk

If the system is not networked this requirement is Not Applicable. The system clock must be configured to compare the system clock at least every 24 hours to the authoritative time source. Check the value of "maxpoll" in the "/etc/chrony/chrony.conf" file with the following command: # sudo grep maxpoll /etc/chrony/chrony.conf server tick.usno.navy.mil iburst maxpoll 16 If the "maxpoll" option is set to a number greater than 16 or the line is commented out, this is a finding. Verify that the "chrony.conf" file is configured to an authoritative DoD time source by running the following command: # grep -i server /etc/chrony/chrony.conf server tick.usno.navy.mil iburst maxpoll 16 server tock.usno.navy.mil iburst maxpoll 16 server ntp2.usno.navy.mil iburst maxpoll 16 If the parameter "server" is not set, is not set to an authoritative DoD time source, or is commented out, this is a finding.

Fix: F-21055r808467_fix

If the system is not networked this requirement is Not Applicable. To configure the system clock to compare the system clock at least every 24 hours to the authoritative time source, edit the "/etc/chrony/chrony.conf" file. Add or correct the following lines, by replacing "[source]" in the following line with an authoritative DoD time source. server [source] iburst maxpoll = 16 If the "chrony" service was running and the value of "maxpoll" or "server" was updated then the service must be restarted using the following command: # sudo systemctl restart chrony.service

a
The Ubuntu operating system must synchronize internal information system clocks to the authoritative time source when the time difference is greater than one second.
AU-8 - Low - CCI-002046 - V-219332 - SV-219332r982209_rule
RMF Control
AU-8
Severity
Low
CCI
CCI-002046
Version
UBTU-18-010502
Vuln IDs
  • V-219332
  • V-100887
Rule IDs
  • SV-219332r982209_rule
  • SV-109991
Inaccurate time stamps make it more difficult to correlate events and can lead to an inaccurate analysis. Determining the correct time a particular event occurred on a system is critical when conducting forensic analysis and investigating system events. Synchronizing internal information system clocks provides uniformity of time stamps for information systems with multiple system clocks and systems connected over a network. Organizations should consider setting time periods for different types of systems (e.g., financial, legal, or mission-critical systems). Organizations should also consider endpoints that may not have regular access to the authoritative time server (e.g., mobile, teleworking, and tactical endpoints). This requirement is related to the comparison done every 24 hours in SRG-OS-000355 because a comparison must be done in order to determine the time difference.
Checks: C-21057r305324_chk

Verify the operating system synchronizes internal system clocks to the authoritative time source when the time difference is greater than one second. Check the value of "makestep" by running the following command: # sudo grep makestep /etc/chrony/chrony.conf makestep 1 -1 If the makestep option is commented out or is not set to "1 -1", this is a finding.

Fix: F-21056r305325_fix

Configure chrony to synchronize the internal system clocks to the authoritative source when the time difference is greater than one second by doing the following, Edit the /etc/chrony/chrony.conf file and add: makestep 1 -1 Restart the chrony service, # sudo systemctl restart chrony.service

a
The Ubuntu operating system must record time stamps for audit records that can be mapped to Coordinated Universal Time (UTC) or Greenwich Mean Time (GMT).
AU-8 - Low - CCI-001890 - V-219333 - SV-219333r958788_rule
RMF Control
AU-8
Severity
Low
CCI
CCI-001890
Version
UBTU-18-010503
Vuln IDs
  • V-219333
  • V-100889
Rule IDs
  • SV-219333r958788_rule
  • SV-109993
If time stamps are not consistently applied and there is no common time reference, it is difficult to perform forensic analysis. Time stamps generated by the operating system include date and time. Time is commonly expressed in Coordinated Universal Time (UTC), a modern continuation of Greenwich Mean Time (GMT), or local time with an offset from UTC.
Checks: C-21058r305327_chk

The time zone must be configured to use Coordinated Universal Time (UTC) or Greenwich Mean Time (GMT). To verify run the following command. # sudo timedatectl status | grep -i "time zone" Timezone: UTC (UTC, +0000) If "Timezone" is not set to UTC or GMT, this is a finding.

Fix: F-21057r305328_fix

To configure the system time zone to use Coordinated Universal Time (UTC) or Greenwich Mean Time (GMT), run the following command replacing [ZONE] with UTC or GMT. # sudo timedatectl set-timezone [ZONE]

b
The Ubuntu operating system must be configured to prohibit or restrict the use of functions, ports, protocols, and/or services, as defined in the PPSM CAL and vulnerability assessments.
CM-7 - Medium - CCI-000382 - V-219334 - SV-219334r958480_rule
RMF Control
CM-7
Severity
Medium
CCI
CCI-000382
Version
UBTU-18-010504
Vuln IDs
  • V-219334
  • V-100891
Rule IDs
  • SV-219334r958480_rule
  • SV-109995
In order to prevent unauthorized connection of devices, unauthorized transfer of information, or unauthorized tunneling (i.e., embedding of data types within data types), organizations must disable or restrict unused or unnecessary physical and logical ports/protocols on information systems. The Ubuntu operating system is capable of providing a wide variety of functions and services. Some of the functions and services provided by default may not be necessary to support essential organizational operations. Additionally, it is sometimes convenient to provide multiple services from a single component (e.g., VPN and IPS); however, doing so increases risk over limiting the services provided by any one component. To support the requirements and principles of least functionality, the Ubuntu operating system must support the organizational requirements, providing only essential capabilities and limiting the use of ports, protocols, and/or services to only those required, authorized, and approved to conduct official business or to address authorized quality of life issues.
Checks: C-21059r802367_chk

Verify the Ubuntu operating system is configured to prohibit or restrict the use of functions, ports, protocols, and/or services as defined in the Ports, Protocols, and Services Management (PPSM) Category Assignments List (CAL) and vulnerability assessments. Check the firewall configuration for any unnecessary or prohibited functions, ports, protocols, and/or services by running the following commands: $ sudo ufw show before-rules $ sudo ufw show user-rules $ sudo ufw show after-rules Ask the system administrator for the site or program PPSM Component Local Services Assessment (CLSA). Verify the services allowed by the firewall match the PPSM CLSA. If there are any additional ports, protocols, or services that are not included in the PPSM CLSA, this is a finding. If there are any ports, protocols, or services that are prohibited by the PPSM CAL, this is a finding.

Fix: F-21058r802368_fix

Add all ports, protocols, or services allowed by the PPSM CLSA by using the following command: $ ufw allow <direction> <port/protocol/service> where the direction is 'in' or 'out' and the port is the one corresponding to the protocol or service allowed. To deny access to port, protocols or services, use: $ ufw deny <direction> <port/protocol/service>

b
Kernel core dumps must be disabled unless needed.
SC-24 - Medium - CCI-001190 - V-219335 - SV-219335r958550_rule
RMF Control
SC-24
Severity
Medium
CCI
CCI-001190
Version
UBTU-18-010505
Vuln IDs
  • V-219335
  • V-100893
Rule IDs
  • SV-219335r958550_rule
  • SV-109997
Kernel core dumps may contain the full contents of system memory at the time of the crash. Kernel core dumps may consume a considerable amount of disk space and may result in denial of service by exhausting the available space on the target file system partition.
Checks: C-21060r305333_chk

Verify that kernel core dumps are disabled unless needed. Check if "kdump" service is active with the following command: # systemctl is-active kdump.service inactive If the "kdump" service is active, ask the System Administrator if the use of the service is required and documented with the Information System Security Officer (ISSO). If the service is active and is not documented, this is a finding.

Fix: F-21059r305334_fix

If kernel core dumps are not required, disable the "kdump" service with the following command: # systemctl disable kdump.service If kernel core dumps are required, document the need with the Information System Security Officer (ISSO).

b
The Ubuntu operating system must use cryptographic mechanisms to protect the integrity of audit tools.
AU-9 - Medium - CCI-001496 - V-219336 - SV-219336r991567_rule
RMF Control
AU-9
Severity
Medium
CCI
CCI-001496
Version
UBTU-18-010506
Vuln IDs
  • V-219336
  • V-100895
Rule IDs
  • SV-219336r991567_rule
  • SV-109999
Protecting the integrity of the tools used for auditing purposes is a critical step toward ensuring the integrity of audit information. Audit information includes all information (e.g., audit records, audit settings, and audit reports) needed to successfully audit information system activity. Audit tools include, but are not limited to, vendor-provided and open source audit tools needed to successfully view and manipulate audit information system activity and records. Audit tools include custom queries and report generators. It is not uncommon for attackers to replace the audit tools or inject code into the existing tools with the purpose of providing the capability to hide or erase system activity from the audit logs. To address this risk, audit tools must be cryptographically signed in order to provide the capability to identify when the audit tools have been modified, manipulated, or replaced. An example is a checksum hash of the file or files.
Checks: C-21061r305336_chk

Verify that Advanced Intrusion Detection Environment (AIDE) is properly configured to use cryptographic mechanisms to protect the integrity of audit tools. Check the selection lines that aide is configured to add/check with the following command: # egrep '(\/sbin\/(audit|au))' /etc/aide/aide.conf /sbin/auditctl p+i+n+u+g+s+b+acl+xattrs+sha512 /sbin/auditd p+i+n+u+g+s+b+acl+xattrs+sha512 /sbin/ausearch p+i+n+u+g+s+b+acl+xattrs+sha512 /sbin/aureport p+i+n+u+g+s+b+acl+xattrs+sha512 /sbin/autrace p+i+n+u+g+s+b+acl+xattrs+sha512 /sbin/audispd p+i+n+u+g+s+b+acl+xattrs+sha512 /sbin/augenrules p+i+n+u+g+s+b+acl+xattrs+sha512 If any of the seven audit tools does not have an appropriate selection line, this is a finding.

Fix: F-21060r305337_fix

Add or update the following selection lines to "/etc/aide/aide.conf", in order to protect the integrity of the audit tools. # Audit Tools /sbin/auditctl p+i+n+u+g+s+b+acl+xattrs+sha512 /sbin/auditd p+i+n+u+g+s+b+acl+xattrs+sha512 /sbin/ausearch p+i+n+u+g+s+b+acl+xattrs+sha512 /sbin/aureport p+i+n+u+g+s+b+acl+xattrs+sha512 /sbin/autrace p+i+n+u+g+s+b+acl+xattrs+sha512 /sbin/audispd p+i+n+u+g+s+b+acl+xattrs+sha512 /sbin/augenrules p+i+n+u+g+s+b+acl+xattrs+sha512

b
The Ubuntu operating system must enable and run the uncomplicated firewall(ufw).
CM-6 - Medium - CCI-000366 - V-219337 - SV-219337r958672_rule
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
UBTU-18-010507
Vuln IDs
  • V-219337
  • V-100897
Rule IDs
  • SV-219337r958672_rule
  • SV-110001
Remote access services, such as those providing remote access to network devices and information systems, which lack automated control capabilities, increase risk and make remote user access management difficult at best. Remote access is access to DoD nonpublic information systems by an authorized user (or an information system) communicating through an external, non-organization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless. Ubuntu operating system functionality (e.g., RDP) must be capable of taking enforcement action if the audit reveals unauthorized activity. Automated control of remote access sessions allows organizations to ensure ongoing compliance with remote access policies by enforcing connection rules of remote access applications on a variety of information system components (e.g., servers, workstations, notebook computers, smartphones, and tablets). Satisfies: SRG-OS-000480-GPOS-00232
Checks: C-21062r569466_chk

Verify the Uncomplicated Firewall is enabled on the system by running the following command: # systemctl is-enabled ufw If the above command returns the status as "disabled", this is a finding. Verify the Uncomplicated Firewall is active on the system by running the following command: # sudo systemctl is-active ufw If the above command returns 'inactive' or any kind of error, this is a finding. If the Uncomplicated Firewall is not installed ask the System Administrator if another application firewall is installed. If no application firewall is installed this is a finding.

Fix: F-21061r569467_fix

Enable the Uncomplicated Firewall by using the following command: # sudo systemctl enable ufw.service If the Uncomplicated Firewall is not currently running on the system, start it with the following command: # sudo systemctl start ufw.service

b
The Ubuntu operating system must notify designated personnel if baseline configurations are changed in an unauthorized manner. The file integrity tool must notify the system administrator when changes to the baseline configuration or anomalies in the operation of any security functions are discovered.
CM-3 - Medium - CCI-001744 - V-219338 - SV-219338r958794_rule
RMF Control
CM-3
Severity
Medium
CCI
CCI-001744
Version
UBTU-18-010508
Vuln IDs
  • V-219338
  • V-100899
Rule IDs
  • SV-219338r958794_rule
  • SV-110003
Unauthorized changes to the baseline configuration could make the system vulnerable to various attacks or allow unauthorized access to the Ubuntu operating system. Changes to Ubuntu operating system configurations can have unintended side effects, some of which may be relevant to security. Detecting such changes and providing an automated response can help avoid unintended, negative consequences that could ultimately affect the security state of the Ubuntu operating system. The Ubuntu operating system's IMO/ISSO and SAs must be notified via email and/or monitoring system trap when there is an unauthorized modification of a configuration item. Satisfies: SRG-OS-000363-GPOS-00150, SRG-OS-000447-GPOS-00201
Checks: C-21063r305342_chk

Verify that Advanced Intrusion Detection Environment (AIDE) notifies the system administrator when anomalies in the operation of any security functions are discovered. Check that AIDE notifies the system administrator when anomalies in the operation of any security functions are discovered with the following command: #sudo grep SILENTREPORTS /etc/default/aide SILENTREPORTS=no If SILENTREPORTS is uncommented and set to yes, this is a finding.

Fix: F-21062r305343_fix

Configure the Ubuntu operating system to notify designated personnel if baseline configurations are changed in an unauthorized manner. Modify the "SILENTREPORTS" parameter in the "/etc/default/aide" file with a value of "no" if it does not already exist.

b
The Ubuntu operating system must disable automatic mounting of Universal Serial Bus (USB) mass storage driver.
IA-3 - Medium - CCI-001958 - V-219339 - SV-219339r958820_rule
RMF Control
IA-3
Severity
Medium
CCI
CCI-001958
Version
UBTU-18-010509
Vuln IDs
  • V-219339
  • V-100919
Rule IDs
  • SV-219339r958820_rule
  • SV-110023
Without authenticating devices, unidentified or unknown devices may be introduced, thereby facilitating malicious activity. Peripherals include, but are not limited to, such devices as flash drives, external storage, and printers.
Checks: C-21064r939265_chk

Note: The "install" and "blacklist" methods are utilized together to fully disable automatic mounting of the USB mass storage driver. Verify the Ubuntu operating system disables the ability to load the USB storage kernel module: $ grep usb-storage /etc/modprobe.d/* | grep "/bin/false" install usb-storage /bin/false If the command does not return any output, or the line is commented out, this is a finding. Verify the operating system disables the ability to use USB mass storage device: $ grep usb-storage /etc/modprobe.d/* | grep -i "blacklist" blacklist usb-storage If the command does not return any output, or the line is commented out, this is a finding.

Fix: F-21063r939266_fix

Configure the Ubuntu operating system to disable using the USB storage kernel module. Create a file under "/etc/modprobe.d" to contain the following: $ sudo su -c "echo install usb-storage /bin/false >> /etc/modprobe.d/DISASTIG.conf" Configure the operating system to disable the ability to use USB mass storage devices: $ sudo su -c "echo blacklist usb-storage >> /etc/modprobe.d/DISASTIG.conf"

b
The Ubuntu operating system must configure the uncomplicated firewall to rate-limit impacted network interfaces.
SC-5 - Medium - CCI-002385 - V-219340 - SV-219340r958902_rule
RMF Control
SC-5
Severity
Medium
CCI
CCI-002385
Version
UBTU-18-010512
Vuln IDs
  • V-219340
  • V-100901
Rule IDs
  • SV-219340r958902_rule
  • SV-110005
DoS is a condition when a resource is not available for legitimate users. When this occurs, the organization either cannot accomplish its mission or must operate at degraded capacity. This requirement addresses the configuration of the Ubuntu operating system to mitigate the impact of DoS attacks that have occurred or are ongoing on system availability. For each system, known and potential DoS attacks must be identified and solutions for each type implemented. A variety of technologies exist to limit or, in some cases, eliminate the effects of DoS attacks (e.g., limiting processes or establishing memory partitions). Employing increased capacity and bandwidth, combined with service redundancy, may reduce the susceptibility to some DoS attacks.
Checks: C-21065r802373_chk

Verify an application firewall is configured to rate limit any connection to the system. Check that the Uncomplicated Firewall is configured to rate limit any connection to the system with the following command: $ sudo ufw show user-rules IPV4 (user): Chain ufw-user-input (1 references) pkts bytes target prot opt in out source destination 1 52 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 /* 'dapp_OpenSSH' */ 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 Chain ufw-user-forward (1 references) pkts bytes target prot opt in out source destination Chain ufw-user-output (1 references) pkts bytes target prot opt in out source destination Chain ufw-user-limit-accept (0 references) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-limit (0 references) pkts bytes target prot opt in out source destination 0 0 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 5 LOG flags 0 level 4 prefix "[UFW LIMIT BLOCK] " 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable If any service is not rate limited by the Uncomplicated Firewall, this is a finding.

Fix: F-21064r802374_fix

Configure the application firewall to protect against or limit the effects of Denial of Service (DoS) attacks by ensuring the Ubuntu operating system is implementing rate-limiting measures on impacted network interfaces. Run the following command replacing "[service]" with the service that needs to be rate limited. $ sudo ufw limit [service] Or rate-limiting can be done on an interface. An example of adding a rate-limit on the eth0 interface: $ sudo ufw limit in on eth0

b
The Ubuntu operating system must implement non-executable data to protect its memory from unauthorized code execution.
SI-16 - Medium - CCI-002824 - V-219341 - SV-219341r958928_rule
RMF Control
SI-16
Severity
Medium
CCI
CCI-002824
Version
UBTU-18-010513
Vuln IDs
  • V-219341
  • V-100903
Rule IDs
  • SV-219341r958928_rule
  • SV-110007
Some adversaries launch attacks with the intent of executing code in non-executable regions of memory or in memory locations that are prohibited. Security safeguards employed to protect memory include, for example, data execution prevention and address space layout randomization. Data execution prevention safeguards can either be hardware-enforced or software-enforced with hardware providing the greater strength of mechanism. Examples of attacks are buffer overflow attacks.
Checks: C-21066r305351_chk

Verify the NX (no-execution) bit flag is set on the system. Check that the no-execution bit flag is set with the following commands: # dmesg | grep -i "execute disable" [ 0.000000] NX (Execute Disable) protection: active If "dmesg" does not show "NX (Execute Disable) protection: active", check the cpuinfo settings with the following command: # grep flags /proc/cpuinfo | grep -w nx | sort -u flags : fpu vme de pse tsc ms nx rdtscp lm constant_tsc If "flags" does not contain the "nx" flag, this is a finding.

Fix: F-21065r305352_fix

Configure the Ubuntu operating system to enable NX. If "nx" is not showing up in /proc/cpuinfo and the system's BIOS setup configuration permits toggling the No Execution bit, then set it to "enable".

b
The Ubuntu operating system must implement address space layout randomization to protect its memory from unauthorized code execution.
SI-16 - Medium - CCI-002824 - V-219342 - SV-219342r958928_rule
RMF Control
SI-16
Severity
Medium
CCI
CCI-002824
Version
UBTU-18-010514
Vuln IDs
  • V-219342
  • V-100905
Rule IDs
  • SV-219342r958928_rule
  • SV-110009
Some adversaries launch attacks with the intent of executing code in non-executable regions of memory or in memory locations that are prohibited. Security safeguards employed to protect memory include, for example, data execution prevention and address space layout randomization. Data execution prevention safeguards can either be hardware-enforced or software-enforced with hardware providing the greater strength of mechanism. Examples of attacks are buffer overflow attacks.
Checks: C-21067r569469_chk

Verify the Ubuntu operating system implements address space layout randomization (ASLR). Check that ASLR is configured on the system with the following command: # sudo sysctl kernel.randomize_va_space kernel.randomize_va_space = 2 Verify the kernel parameter "randomize_va_space" is set to 2 with the following command: # cat /proc/sys/kernel/randomize_va_space 2 If "kernel.randomize_va_space" is not set to 2, this is a finding. Check the saved value of the kernel.randomize_va_space variable is not different from 2. # sudo egrep -R "^kernel.randomize_va_space=[^2]" /etc/sysctl.conf /etc/sysctl.d If this returns a result, this is a finding.

Fix: F-21066r569470_fix

Set the "kernel.randomize_va_space" entry found in the "/etc/sysctl.conf" file to a value of "2". After the line has been modified the kernel settings from all system configuration files must be reloaded; before any of the changes will take effect. Run the following command to reload all of the kernel system configuration files: # sudo sysctl --system

b
The Ubuntu operating system must use a file integrity tool to verify correct operation of all security functions.
SI-6 - Medium - CCI-002696 - V-219343 - SV-219343r958944_rule
RMF Control
SI-6
Severity
Medium
CCI
CCI-002696
Version
UBTU-18-010515
Vuln IDs
  • V-219343
  • V-100907
Rule IDs
  • SV-219343r958944_rule
  • SV-110011
Without verification of the security functions, security functions may not operate correctly and the failure may go unnoticed. Security function is defined as the hardware, software, and/or firmware of the information system responsible for enforcing the system security policy and supporting the isolation of code and data on which the protection is based. Security functionality includes, but is not limited to, establishing system accounts, configuring access authorizations (i.e., permissions, privileges), setting events to be audited, and setting intrusion detection parameters. This requirement applies to the Ubuntu operating system performing security function verification/testing and/or systems and environments that require this functionality.
Checks: C-21068r880895_chk

Verify that Advanced Intrusion Detection Environment (AIDE) is installed and verifies the correct operation of all security functions. Check that the AIDE package is installed with the following command: $ sudo dpkg -l | grep aide ii aide 0.16-3ubuntu0.1 amd64 Advanced Intrusion Detection Environment - static binary If AIDE is not installed, ask the System Administrator how file integrity checks are performed on the system. If there is no application installed to perform integrity checks, this is a finding. If AIDE is installed, check if it has been initialized with the following command: $ sudo aide.wrapper --check If the output is "Couldn't open file /var/lib/aide/aide.db for reading", this is a finding.

Fix: F-21067r880896_fix

Install AIDE, initialize it, and perform a manual check. Install AIDE: $ sudo apt install aide Initialize it (this may take a few minutes): $ sudo aideinit Running aide --init... Example output: Start timestamp: 2022-11-20 11:53:17 -0700 (AIDE 0.16) AIDE initialized database at /var/lib/aide/aide.db.new Verbose level: 6 Number of entries: 119543 --------------------------------------------------- The attributes of the (uncompressed) database(s): --------------------------------------------------- /var/lib/aide/aide.db.new RMD160 : PiEP1DX91JMcHnRSPnpFqNfIFr4= TIGER : /zM5yQBnOIoEH0jplJE5v6S0rUErbTXL SHA256 : BE2iHtBN9lEX53l4R/p7t1al0dIlsgPc Lg4YI08+/Jk= SHA512 : JIdGeNVRgtBPPSwun9St+9cwUrgIIKUW KVTksZXJ29Tt+luC/XNDcjIub7fbPVw/ EcTDsvYtt9MBmBxw1wCYng== CRC32 : jB2FVw== HAVAL : Jhe+fqaDpkswpWSnOTN28TO05QFHsjdq RcFZwCVUGTQ= GOST : WFrarVyxpXbKdW9SAaOy1Te8rSodV3/q nLsXuP7YujA= End timestamp: 2022-11-20 11:58:19 -0700 (run time: 5m 2s) The new database will need to be renamed to be read by AIDE: $ sudo cp -p /var/lib/aide/aide.db.new /var/lib/aide/aide.db Perform a manual check: $ sudo aide.wrapper --check Example output: Start timestamp: 2022-11-20 11:59:16 -0700 (AIDE 0.16) AIDE found differences between database and filesystem!! ... Done.

b
The Ubuntu operating system must be configured so that a file integrity tool verifies the correct operation of security functions every 30 days.
SI-6 - Medium - CCI-002699 - V-219344 - SV-219344r958946_rule
RMF Control
SI-6
Severity
Medium
CCI
CCI-002699
Version
UBTU-18-010516
Vuln IDs
  • V-219344
  • V-100909
Rule IDs
  • SV-219344r958946_rule
  • SV-110013
Without verification of the security functions, security functions may not operate correctly and the failure may go unnoticed. Security function is defined as the hardware, software, and/or firmware of the information system responsible for enforcing the system security policy and supporting the isolation of code and data on which the protection is based. Security functionality includes, but is not limited to, establishing system accounts, configuring access authorizations (i.e., permissions, privileges), setting events to be audited, and setting intrusion detection parameters. Notifications provided by information systems include, for example, electronic alerts to system administrators, messages to local computer consoles, and/or hardware indications, such as lights. This requirement applies to the Ubuntu operating system performing security function verification/testing and/or systems and environments that require this functionality.
Checks: C-21069r305360_chk

Verify that Advanced Intrusion Detection Environment (AIDE) performs a verification of the operation of security functions every 30 days. Note: A file integrity tool other than AIDE may be used, but the tool must be executed at least once per week. Check that AIDE is being executed every 30 days or less with the following command: # ls -al /etc/cron.daily/aide -rwxr-xr-x 1 root root 26049 Oct 24 2014 /etc/cron.daily/aide If the "/etc/cron.daily/aide" file does not exist or a cron job is not configured to run at least every 30 days, this is a finding.

Fix: F-21068r305361_fix

The cron file for AIDE is fairly complex as it creates the report. This file is installed with the aide-common package and the default can be restored by copying it from another location: # sudo cp /usr/share/aide/config/cron.daily/aide /etc/cron.daily/aide

b
The Ubuntu operating system must be configured so that remote X connections are disabled, unless to fulfill documented and validated mission requirements.
CM-6 - Medium - CCI-000366 - V-233779 - SV-233779r991589_rule
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
UBTU-18-010418
Vuln IDs
  • V-233779
Rule IDs
  • SV-233779r991589_rule
The security risk of using X11 forwarding is that the client's X11 display server may be exposed to attack when the SSH client requests forwarding. A system administrator may have a stance in which they want to protect clients that may expose themselves to attack by unwittingly requesting X11 forwarding, which can warrant a ''no'' setting. X11 forwarding should be enabled with caution. Users with the ability to bypass file permissions on the remote host (for the user's X11 authorization database) can access the local X11 display through the forwarded connection. An attacker may then be able to perform activities such as keystroke monitoring if the ForwardX11Trusted option is also enabled. If X11 services are not required for the system's intended function, they should be disabled or restricted as appropriate to the system’s needs.
Checks: C-36965r621617_chk

Verify that X11Forwarding is disabled with the following command: # grep -i x11forwarding /etc/ssh/sshd_config | grep -v "^#" X11Forwarding no If the "X11Forwarding" keyword is set to "yes" and is not documented with the Information System Security Officer (ISSO) as an operational requirement or is missing, this is a finding.

Fix: F-33199r568412_fix

Edit the "/etc/ssh/sshd_config" file to uncomment or add the line for the "X11Forwarding" keyword and set its value to "no" (this file may be named differently or be in a different location if using a version of SSH that is provided by a third-party vendor): X11Forwarding no The SSH service must be restarted for changes to take effect: $ sudo systemctl restart sshd

b
The Ubuntu operating system SSH daemon must prevent remote hosts from connecting to the proxy display.
CM-6 - Medium - CCI-000366 - V-233780 - SV-233780r991589_rule
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
UBTU-18-010419
Vuln IDs
  • V-233780
Rule IDs
  • SV-233780r991589_rule
When X11 forwarding is enabled, there may be additional exposure to the server and client displays if the SSHD proxy display is configured to listen on the wildcard address. By default, SSHD binds the forwarding server to the loopback address and sets the hostname part of the DIPSLAY environment variable to localhost. This prevents remote hosts from connecting to the proxy display.
Checks: C-36818r621588_chk

Verify the SSH daemon prevents remote hosts from connecting to the proxy display. Check the SSH X11UseLocalhost setting with the following command: # sudo grep -i x11uselocalhost /etc/ssh/sshd_config X11UseLocalhost yes If the "X11UseLocalhost" keyword is set to "no", is missing, or is commented out, this is a finding.

Fix: F-33200r568415_fix

Configure the SSH daemon to prevent remote hosts from connecting to the proxy display. Edit the "/etc/ssh/sshd_config" file to uncomment or add the line for the "X11UseLocalhost" keyword and set its value to "yes" (this file may be named differently or be in a different location if using a version of SSH that is provided by a third-party vendor): X11UseLocalhost yes

b
All local interactive user home directories defined in the /etc/passwd file must exist.
CM-6 - Medium - CCI-000366 - V-237768 - SV-237768r991589_rule
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
UBTU-18-010450
Vuln IDs
  • V-237768
Rule IDs
  • SV-237768r991589_rule
If a local interactive user has a home directory defined that does not exist, the user may be given access to the / directory as the current working directory upon logon. This could create a Denial of Service (DoS) because the user would not be able to access their logon configuration files, and it may give them visibility to system files they normally would not be able to access.
Checks: C-40982r648734_chk

Verify the assigned home directory of all local interactive users on the Ubuntu operating system exists. Check the home directory assignment for all local interactive non-privileged users with the following command: $ sudo awk -F: '($3&gt;=1000)&amp;&amp;($7 !~ /nologin/){print $1, $3, $6}' /etc/passwd smithj 1001 /home/smithj Note: This may miss interactive users that have been assigned a privileged User ID (UID). Evidence of interactive use may be obtained from a number of log files containing system logon information. Check that all referenced home directories exist with the following command: $ sudo pwck -r user 'smithj': directory '/home/smithj' does not exist If any home directories referenced in "/etc/passwd" are returned as not defined, this is a finding.

Fix: F-40941r648735_fix

Create home directories to all local interactive users that currently do not have a home directory assigned. Use the following commands to create the user home directory assigned in "/etc/ passwd": Note: The example will be for the user smithj, who has a home directory of "/home/smithj", a User ID (UID) of "smithj", and a Group Identifier (GID) of "users assigned" in "/etc/passwd". $ sudo mkdir /home/smithj $ sudo chown smithj /home/smithj $ sudo chgrp users /home/smithj $ sudo chmod 0750 /home/smithj

b
All local interactive user home directories must have mode 0750 or less permissive.
CM-6 - Medium - CCI-000366 - V-237769 - SV-237769r991589_rule
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
UBTU-18-010451
Vuln IDs
  • V-237769
Rule IDs
  • SV-237769r991589_rule
Excessive permissions on local interactive user home directories may allow unauthorized access to user files by other users.
Checks: C-32990r567709_chk

Verify the assigned home directory of all local interactive users has a mode of "0750" or less permissive with the following command: Note: This may miss interactive users that have been assigned a privileged User Identifier (UID). Evidence of interactive use may be obtained from a number of log files containing system logon information. $ sudo ls -ld $(awk -F: '($3&gt;=1000)&amp;&amp;($7 !~ /nologin/){print $6}' /etc/passwd) drwxr-x--- 2 smithj admin 4096 Jun 5 12:41 smithj If home directories referenced in "/etc/passwd" do not have a mode of "0750" or less permissive, this is a finding.

Fix: F-40942r648738_fix

Change the mode of interactive user’s home directories to "0750". To change the mode of a local interactive user’s home directory, use the following command: Note: The example will be for the user "smithj". $ sudo chmod 0750 /home/smithj

b
All local interactive user home directories must be group-owned by the home directory owners primary group.
CM-6 - Medium - CCI-000366 - V-237770 - SV-237770r991589_rule
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
UBTU-18-010452
Vuln IDs
  • V-237770
Rule IDs
  • SV-237770r991589_rule
If the Group Identifier (GID) of a local interactive user’s home directory is not the same as the primary GID of the user, this would allow unauthorized access to the user’s files, and users that share the same group may not be able to access files that they legitimately should.
Checks: C-40984r648740_chk

Verify the assigned home directory of all local interactive users is group-owned by that user’s primary Group Identifier (GID). Check the home directory assignment for all non-privileged users on the system with the following command: Note: This may miss local interactive users that have been assigned a privileged UID. Evidence of interactive use may be obtained from a number of log files containing system logon information. The returned directory "/home/smithj" is used as an example. $ sudo ls -ld $(awk -F: '($3&gt;=1000)&amp;&amp;($7 !~ /nologin/){print $6}' /etc/passwd) drwxr-x--- 2 smithj admin 4096 Jun 5 12:41 smithj Check the user's primary group with the following command: $ sudo grep admin /etc/group admin:x:250:smithj,jonesj,jacksons If the user home directory referenced in "/etc/passwd" is not group-owned by that user’s primary GID, this is a finding.

Fix: F-40943r648741_fix

Change the group owner of a local interactive user’s home directory to the group found in "/etc/passwd". To change the group owner of a local interactive user’s home directory, use the following command: Note: The example will be for the user "smithj", who has a home directory of "/home/smithj", and has a primary group of users. $ sudo chgrp users /home/smithj

c
The Ubuntu operating system must not have accounts configured with blank or null passwords.
CM-6 - High - CCI-000366 - V-251506 - SV-251506r991589_rule
RMF Control
CM-6
Severity
High
CCI
CCI-000366
Version
UBTU-18-010522
Vuln IDs
  • V-251506
Rule IDs
  • SV-251506r991589_rule
If an account has an empty password, anyone could log on and run commands with the privileges of that account. Accounts with empty passwords should never be used in operational environments.
Checks: C-54941r808513_chk

Check the "/etc/shadow" file for blank passwords with the following command: $ sudo awk -F: '!$2 {print $1}' /etc/shadow If the command returns any results, this is a finding.

Fix: F-54895r808514_fix

Configure all accounts on the system to have a password or lock the account with the following commands: Perform a password reset: $ sudo passwd [username] Lock an account: $ sudo passwd -l [username]

c
The Ubuntu operating system must not allow accounts configured with blank or null passwords.
CM-6 - High - CCI-000366 - V-251507 - SV-251507r991589_rule
RMF Control
CM-6
Severity
High
CCI
CCI-000366
Version
UBTU-18-010523
Vuln IDs
  • V-251507
Rule IDs
  • SV-251507r991589_rule
If an account has an empty password, anyone could log on and run commands with the privileges of that account. Accounts with empty passwords should never be used in operational environments.
Checks: C-54942r832929_chk

To verify that null passwords cannot be used, run the following command: $ grep nullok /etc/pam.d/common-password If this produces any output, it may be possible to log on with accounts with empty passwords. If null passwords can be used, this is a finding.

Fix: F-54896r832930_fix

If an account is configured for password authentication but does not have an assigned password, it may be possible to log on to the account without authenticating. Remove any instances of the "nullok" option in "/etc/pam.d/common-password" to prevent logons with empty passwords.

b
The Ubuntu operating system must disable all wireless network adapters.
SC-8 - Medium - CCI-002418 - V-252703 - SV-252703r958358_rule
RMF Control
SC-8
Severity
Medium
CCI
CCI-002418
Version
UBTU-18-010521
Vuln IDs
  • V-252703
  • V-100913
Rule IDs
  • SV-252703r958358_rule
  • SV-110017
Without protection of communications with wireless peripherals, confidentiality and integrity may be compromised because unprotected communications can be intercepted and either read, altered, or used to compromise the operating system. This requirement applies to wireless peripheral technologies (e.g., wireless mice, keyboards, displays, etc.) used with an operating system. Wireless peripherals (e.g., Wi-Fi/Bluetooth/IR Keyboards, Mice, and Pointing Devices and Near Field Communications [NFC]) present a unique challenge by creating an open, unsecured port on a computer. Wireless peripherals must meet DoD requirements for wireless data transmission and be approved for use by the AO. Even though some wireless peripherals, such as mice and pointing devices, do not ordinarily carry information that need to be protected, modification of communications with these wireless peripherals may be used to compromise the operating system. Communication paths outside the physical protection of a controlled boundary are exposed to the possibility of interception and modification. Protecting the confidentiality and integrity of communications with wireless peripherals can be accomplished by physical means (e.g., employing physical barriers to wireless radio frequencies) or by logical means (e.g., employing cryptographic techniques). If physical means of protection are employed, then logical means (cryptography) do not have to be employed, and vice versa. If the wireless peripheral is only passing telemetry data, encryption of the data may not be required.
Checks: C-56159r819052_chk

Verify that there are no wireless interfaces configured on the system. Check that the system does not have active wireless interfaces with the following command: Note: This requirement is Not Applicable for systems that do not have physical wireless network radios. # ifconfig -a | more eth0 Link encap:Ethernet HWaddr ff:ff:ff:ff:ff:ff inet addr:192.168.2.100 Bcast:192.168.2.255 Mask:255.255.255.0 ... eth1 IEEE 802.11b ESSID:"tacnet" Mode:Managed Frequency:2.412 GHz Access Point: 00:40:E7:22:45:CD ... lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host ... If a wireless interface is configured and has not been documented and approved by the Information System Security Officer (ISSO), this is a finding.

Fix: F-56109r819053_fix

Configure the system to disable all wireless network interfaces with the following command: # sudo ifdown [ADAPTER_NAME]

b
The Ubuntu operating system SSH server must be configured to use only FIPS-validated key exchange algorithms.
AC-17 - Medium - CCI-000068 - V-255906 - SV-255906r991554_rule
RMF Control
AC-17
Severity
Medium
CCI
CCI-000068
Version
UBTU-18-010421
Vuln IDs
  • V-255906
Rule IDs
  • SV-255906r991554_rule
Without cryptographic integrity protections provided by FIPS-validated cryptographic algorithms, information can be viewed and altered by unauthorized users without detection. The system will attempt to use the first algorithm presented by the client that matches the server list. Listing the values "strongest to weakest" is a method to ensure the use of the strongest algorithm available to secure the SSH connection.
Checks: C-59583r880887_chk

Verify that the SSH server is configured to use only FIPS-validated key exchange algorithms: $ sudo grep -i kexalgorithms /etc/ssh/sshd_config KexAlgorithms ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256 If "KexAlgorithms" is not configured, is commented out, or does not contain only the algorithms "ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256" in exact order, this is a finding.

Fix: F-59526r880888_fix

Configure the SSH server to use only FIPS-validated key exchange algorithms by adding or modifying the following line in "/etc/ssh/sshd_config": KexAlgorithms ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256 Restart the "sshd" service for changes to take effect: $ sudo systemctl restart sshd

a
The Ubuntu operating system must restrict access to the kernel message buffer.
SC-4 - Low - CCI-001090 - V-255907 - SV-255907r958524_rule
RMF Control
SC-4
Severity
Low
CCI
CCI-001090
Version
UBTU-18-010510
Vuln IDs
  • V-255907
Rule IDs
  • SV-255907r958524_rule
Restricting access to the kernel message buffer limits access only to root. This prevents attackers from gaining additional system information as a nonprivileged user.
Checks: C-59584r880892_chk

Verify the operating system is configured to restrict access to the kernel message buffer with the following commands: $ sudo sysctl kernel.dmesg_restrict kernel.dmesg_restrict = 1 If "kernel.dmesg_restrict" is not set to "1" or is missing, this is a finding. Check that the configuration files are present to enable this kernel parameter: $ sudo grep -r kernel.dmesg_restrict /run/sysctl.d/* /etc/sysctl.d/* /usr/local/lib/sysctl.d/* /usr/lib/sysctl.d/* /lib/sysctl.d/* /etc/sysctl.conf 2&gt; /dev/null /etc/sysctl.conf:kernel.dmesg_restrict = 1 /etc/sysctl.d/99-sysctl.conf:kernel.dmesg_restrict = 1 If "kernel.dmesg_restrict" is not set to "1", is missing or commented out, this is a finding. If conflicting results are returned, this is a finding.

Fix: F-59527r880893_fix

Configure the operating system to restrict access to the kernel message buffer. Set the system to the required kernel parameter by adding or modifying the following line in /etc/sysctl.conf or a config file in the /etc/sysctl.d/ directory: kernel.dmesg_restrict = 1 Remove any configurations that conflict with the above from the following locations: /run/sysctl.d/ /etc/sysctl.d/ /usr/local/lib/sysctl.d/ /usr/lib/sysctl.d/ /lib/sysctl.d/ /etc/sysctl.conf Reload settings from all system configuration files with the following command: $ sudo sysctl --system

c
The Ubuntu operating system must be a vendor supported release.
CM-6 - High - CCI-000366 - V-264388 - SV-264388r991589_rule
RMF Control
CM-6
Severity
High
CCI
CCI-000366
Version
UBTU-18-999999
Vuln IDs
  • V-264388
Rule IDs
  • SV-264388r991589_rule
An Ubuntu operating system release is considered "supported" if the vendor continues to provide security patches for the product. With an unsupported release, it will not be possible to resolve security issues discovered in the system software.
Checks: C-68302r986311_chk

Verify the version of the Ubuntu operating system is vendor supported. Check the version of the Ubuntu operating system with the following command: # cat /etc/lsb-release DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS" Validate that "Extended Security Maintenance" support has been purchased from the vendor. If the operating system does not have a documented "Extended Security Maintenance" agreement in place, this is a finding.

Fix: F-68210r986312_fix

Upgrade to a supported version of the Ubuntu operating system.