View SCAP - Windows 2008 Member Server Security Technical Implementation Guide V6R44

c

Systems must be at supported service packs (SP) or releases levels.

RMF Control: CM-6
Severity: High
CCI: CCI-000366
Version: 2.005
Vuln IDs: V-1073
Rule IDs: SV-29338r2_rule

Systems at unsupported service packs or releases will not receive security updates for new vulnerabilities and leaves them subject to exploitation. Systems must be maintained at a service pack level supported by the vendor with new security updates.HKSystem Administrator

Fix: F-30098r1_fix

Update the system to a supported service pack. Application of new service packs should be thoroughly tested before deploying in a production environment.

a

The system allows shutdown from the logon dialog box.

RMF Control: CM-6
Severity: Low
CCI: CCI-000366
Version: 3.007
Vuln IDs: V-1075
Rule IDs: SV-29591r1_rule

Displaying the shutdown button may allow individuals to shut down a system anonymously. Only authenticated users should be allowed to shut down the system. Preventing display of this button in the logon dialog box, ensures that individuals who shut down the system are authorized and tracked in the systems Security event log.HKSystem Administrator

Fix: F-28803r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Shutdown: Allow system to be shutdown without having to log on” to “Disabled”.

c

Local volumes are not formatted using NTFS.

RMF Control: AC-3
Severity: High
CCI: CCI-000213
Version: 2.008
Vuln IDs: V-1081
Rule IDs: SV-29478r1_rule

This is a category 1 finding because the ability to set access permissions and audit critical directories and files is only available by using the NTFS file system. The capability to assign access permissions to file objects is a DOD policy requirement. The FAT file system only provides the capability to make files read-only and hidden. The capability to change these attributes is not restricted to any users. An unauthorized individual could boot the machine from a floppy disk and gain full and unrecorded access to file data. trueSystem AdministratorInformation Assurance Officer

Fix: F-53r1_fix

Format all partitions/drives to use NTFS.

b

The required legal notice must be configured to display before console logon.

RMF Control: AC-8
Severity: Medium
CCI: CCI-000048
Version: 3.011
Vuln IDs: V-1089
Rule IDs: SV-29634r4_rule

Failure to display the logon banner prior to a logon attempt will negate legal proceedings resulting from unauthorized access to system resources.System AdministratorInformation Assurance Officer

Fix: F-82921r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Interactive Logon: Message text for users attempting to log on" to the following. You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.

a

Caching of logon credentials must be limited.

RMF Control: CM-6
Severity: Low
CCI: CCI-000366
Version: 3.013
Vuln IDs: V-1090
Rule IDs: SV-28979r3_rule

The default Windows configuration caches the last logon credentials for users who log on interactively to a system. This feature is provided for system availability reasons, such as the user's machine being disconnected from the network or domain controllers being unavailable. Even though the credential cache is well-protected, if a system is attacked, an unauthorized individual may isolate the password to a domain user account using a password-cracking program and gain access to the domain.HKSystem Administrator

Fix: F-63551r1_fix

If the system is not a member of a domain, this is NA. Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Interactive Logon: Number of previous logons to cache (in case Domain Controller is not available)" to "2" logons or less.

c

Anonymous shares are not restricted.

RMF Control: SC-4
Severity: High
CCI: CCI-001090
Version: 3.018
Vuln IDs: V-1093
Rule IDs: SV-28983r1_rule

This is a Category 1 finding because it allows anonymous logon users (null session connections) to list all account names and enumerate all shared resources, thus providing a map of potential points to attack the system.trueIn a mixed Windows environment this setting may cause systems with down-level operating systems to fail to authenticate, may prevent their users from changing their passwords, and may cause problems with managing printers and spools. In domains supporting Exchange 2003 servers and versions of Outlook earlier than Outlook 2003, the setting “Network access: Do not allow anonymous enumeration of SAM accounts and shares” should be set to “Disabled” on the Domain Controller Group Policy, to allow Outlook to anonymously query the global catalog service.System AdministratorInformation Assurance Officer

Fix: F-28805r1_fix

Configure the policy values for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Network access: Do not allow anonymous enumeration of SAM accounts” and “Network access: Do not allow anonymous enumeration of SAM accounts and shares” to “Enabled".

b

Number of allowed bad-logon attempts does not meet minimum requirements.

RMF Control: AC-7
Severity: Medium
CCI: CCI-000044
Version: 4.002
Vuln IDs: V-1097
Rule IDs: SV-28987r1_rule

The account lockout feature, when enabled, prevents brute-force password attacks on the system. The higher this value is, the less effective the account lockout feature will be in protecting the local system. The number of bad logon attempts should be reasonably small to minimize the possibility of a successful password attack, while allowing for honest errors made during a normal user logon.HKSystem Administrator

Fix: F-6569r1_fix

Configure the system to lock out an account after three invalid logon attempts.

b

The reset period for the account lockout counter must be configured to 15 minutes or greater on Windows 2008.

RMF Control: AC-7
Severity: Medium
CCI: CCI-000044
Version: 4.003
Vuln IDs: V-1098
Rule IDs: SV-29639r2_rule

The account lockout feature, when enabled, prevents brute-force password attacks on the system. This parameter specifies the period of time that must pass after failed logon attempts before the counter is reset to "0". The smaller this value is, the less effective the account lockout feature will be in protecting the local system.HKSystem Administrator

Fix: F-80991r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy >> "Reset account lockout counter after" to at least "15" minutes.

b

Windows 2008 account lockout duration must be configured to 15 minutes or greater.

RMF Control: AC-7
Severity: Medium
CCI: CCI-002238
Version: 4.004
Vuln IDs: V-1099
Rule IDs: SV-29643r2_rule

The account lockout feature, when enabled, prevents brute-force password attacks on the system. This parameter specifies the period of time that an account will remain locked after the specified number of failed logon attempts.HKSystem Administrator

Fix: F-80989r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy >> "Account lockout duration" to "15" minutes or greater. A value of "0" is also acceptable, requiring an administrator to unlock the account.

c

Unauthorized users are granted right to Act as part of the operating system.

RMF Control: AC-6
Severity: High
CCI: CCI-002235
Version: 4.009
Vuln IDs: V-1102
Rule IDs: SV-28991r1_rule

This is a Category 1 finding because users and user groups that are assigned this right can bypass all security protective mechanisms that apply to all users, including administrators. Accounts with this right should have passwords with the maximum length and be kept in a locked container accessible only by the IAO and his designated backup. Some applications require this right to function. Any exception needs to be documented with the IAO.trueRemoving application accounts from this right may cause the applications to stop functioning.System AdministratorInformation Assurance Officer

Fix: F-5745r1_fix

Configure the system to prevent unauthorized users to "Act as part of the operating system".

b

User rights assignments must meet minimum requirements.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 4.010-MS
Vuln IDs: V-1103
Rule IDs: SV-18393r4_rule

Inappropriate granting of user rights can provide system, administrative, and other high level capabilities not required by the normal user.trueSystem AdministratorInformation Assurance Officer

Fix: F-78925r1_fix

Configure the policy values for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> as listed below: Access Credential Manager as a trusted caller - (None) Access this computer from the network - Administrators, Authenticated Users Act as part of the operating system - See separate requirement V-1102 Allow log on locally - Administrators Allow log on through Terminal Services - Administrators Backup files and directories - Administrators Bypass traverse checking - Administrators, Authenticated Users, Local Service, Network Service Change the system time - Administrators, Local Service Change the time zone - Administrators, Local Service Create a pagefile - Administrators Create a token object - (None) Create global objects - Administrators, Service, Local Service, Network Service Create permanent shared objects - (None) Create symbolic links - Administrators Debug programs - See separate requirement V-18010 Deny access to this computer from the network - See separate requirement V-1155 Deny log on as a batch job - See separate requirement V-26483 Deny log on as a service - See separate requirement V-26484 Deny log on locally - See separate requirement V-26485 Deny log on through Terminal Services - See separate requirement V-26486 Enable computer and user accounts to be trusted for delegation - Administrators Force shutdown from a remote system - Administrators Generate security audits - Local Service, Network Service Impersonate a client after authentication - Administrators, Service, Local Service, Network Service Increase scheduling priority - Administrators Load and unload device drivers - Administrators Lock pages in memory - (None) Manage auditing and security log - Administrators; plus Exchange Enterprise Servers Group on Exchange Servers If the organization has an "Auditors" group from previous requirements, the assignment of this group to the user right would not be a finding. Modify an object label - Administrators Modify firmware environment values - Administrators Perform volume maintenance tasks - Administrators Profile single process - Administrators Profile system performance - Administrators Remove computer from docking station - Administrators Replace a process level token - Local Service, Network Service Restore files and directories - Administrators Shut down the system - Administrators Take ownership of files or other objects - Administrators

b

Maximum password age does not meet minimum requirements.

RMF Control: IA-5
Severity: Medium
CCI: CCI-000199
Version: 4.011
Vuln IDs: V-1104
Rule IDs: SV-29647r1_rule

The longer a password is in use, the greater the opportunity for someone to gain unauthorized knowledge of the passwords. Further, scheduled changing of passwords hinders the ability of unauthorized system users to crack passwords and gain access to a system.HKSystem Administrator

Fix: F-6573r1_fix

Configure the Maximum Password Age so that it is not "0" and doesn't exceed 60 days.

b

Minimum password age does not meet minimum requirements.

RMF Control: IA-5
Severity: Medium
CCI: CCI-000198
Version: 4.012
Vuln IDs: V-1105
Rule IDs: SV-28995r1_rule

Permitting passwords to be changed in immediate succession within the same day, allows users to cycle passwords through their history database. This enables users to effectively negate the purpose of mandating periodic password changes.HKSystem Administrator

Fix: F-6574r1_fix

Configure the Minimum Password Age so that it is a minimum of "1".

b

The password history must be configured to 24 passwords remembered.

RMF Control: IA-5
Severity: Medium
CCI: CCI-000200
Version: 4.014
Vuln IDs: V-1107
Rule IDs: SV-29652r2_rule

A system is more vulnerable to unauthorized access when system users recycle the same password several times without being required to change a password to a unique password on a regularly scheduled basis. This enables users to effectively negate the purpose of mandating periodic password changes. The default value is 24 for Windows domain systems. DoD has decided this is the appropriate value for all Windows systems.HKSystem Administrator

Fix: F-74861r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> "Enforce password history" to "24" passwords remembered.

b

The built-in guest account is not disabled.

RMF Control: IA-8
Severity: Medium
CCI: CCI-000804
Version: 4.020
Vuln IDs: V-1113
Rule IDs: SV-29657r1_rule

A system faces an increased vulnerability threat if the built-in guest account is not disabled. This account is a known account that exists on all Windows systems and cannot be deleted. This account is initialized during the installation of the operating system with no password assigned. This account is a member of the Everyone user group and has all the rights and permissions associated with that group, which could subsequently provide access to system resources to anonymous users.System Administrator

Fix: F-5759r1_fix

Configure the system to disable the built-in guest Account.

b

The built-in guest account has not been renamed.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 4.021
Vuln IDs: V-1114
Rule IDs: SV-29485r1_rule

A system faces an increased vulnerability threat if the built-in guest account is not renamed or disabled. The built-in guest account is a known user account on all Windows systems, and as initially installed, does not require a password. This can allow access to system resources by unauthorized users. This account is a member of the group Everyone and has all the rights and permissions associated with that group and could provide access to system resources to unauthorized users.System Administrator

Fix: F-5761r1_fix

Configure the system to rename the built-in guest account

b

The built-in administrator account has not been renamed.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 4.022
Vuln IDs: V-1115
Rule IDs: SV-28998r1_rule

The built-in administrator account is a well known account. Renaming the account to an unidentified name improves the protection of this account and the system.System Administrator

Fix: F-5762r1_fix

Configure the system to rename the built-in administrator account.

b

Windows event log sizes must meet minimum requirements.

RMF Control: AU-4
Severity: Medium
CCI: CCI-001849
Version: 5.002
Vuln IDs: V-1118
Rule IDs: SV-29488r2_rule

Inadequate log size will cause the log to fill up quickly. This may prevent audit events from being recorded properly and require frequent attention by administrative personnel.System AdministratorInformation Assurance Officer

Fix: F-71599r3_fix

Configure the following policy values as listed below: Computer Configuration >> Administrative Templates >> Windows Components >> Event Log Service >> Application >> "Maximum Log Size (KB)" to "Enabled" with a "Maximum Log Size (KB)" of "32768" or greater. Security >> "Maximum Log Size (KB)" to "Enabled" with a "Maximum Log Size (KB)" of "196608" or greater. Setup >> "Maximum Log Size (KB)" to "Enabled" with a "Maximum Log Size (KB)" of "32768" or greater. System >> "Maximum Log Size (KB)" to "Enabled" with a "Maximum Log Size (KB)" of "32768" or greater.

b

ACLs for system files and directories do not conform to minimum requirements.

RMF Control: AC-3
Severity: Medium
CCI: CCI-002165
Version: 2.006
Vuln IDs: V-1130
Rule IDs: SV-29507r1_rule

Failure to properly configure file and directory permissions (ACLs) allows the possibility of unauthorized and anonymous modification to the operating system and installed applications.If a manual check of a questionable ACL setting shows that it has been set to meet or is more restrictive than minimum requirements, then it will not be counted as a finding.trueSystem Administrator

Fix: F-29104r1_fix

Maintain the default file ACLs, configure the Security Option: “Network access: Let everyone permissions apply to anonymous users” to “Disabled” (V-3377) and restrict the Power Users group to include no members.

a

Users must be forcibly disconnected when their logon hours expire.

RMF Control: SC-10
Severity: Low
CCI: CCI-001133
Version: 4.006
Vuln IDs: V-1136
Rule IDs: SV-29001r2_rule

Users must not be permitted to remain logged on to the network after they have exceeded their permitted logon hours. In many cases, this indicates that a user forgot to log off before leaving for the day. However, it may also indicate that a user is attempting unauthorized access at a time when the system may be less closely monitored. Forcibly disconnecting users when logon hours expire protects critical and sensitive network data from exposure to unauthorized personnel with physical access to the computer.HKSystem Administrator

Fix: F-53893r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Microsoft Network Server: Disconnect Clients When Logon Hours Expire" to "Enabled".

b

Unencrypted passwords must not be sent to third-party SMB Servers.

RMF Control: IA-5
Severity: Medium
CCI: CCI-000197
Version: 3.034
Vuln IDs: V-1141
Rule IDs: SV-29004r2_rule

Some non-Microsoft SMB servers only support unencrypted (plain text) password authentication. Sending plain text passwords across the network, when authenticating to an SMB server, reduces the overall security of the environment. Check with the Vendor of the SMB server to see if there is a way to support encrypted password authentication.HKSystem Administrator

Fix: F-66915r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Microsoft Network Client: Send unencrypted password to third-party SMB servers" to "Disabled".

b

Automatic logons must be disabled.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 3.040
Vuln IDs: V-1145
Rule IDs: SV-29007r2_rule

Allowing a system to automatically log on when the machine is booted could give access to any unauthorized individual who restarts the computer. Automatic logon with administrator privileges would give full access to an unauthorized individual.If the DefaultName or DefaultDomainName in the same registry path contain an administrator account name and the DefaultPassword contains a value, this is a CAT I finding.System Administrator

Fix: F-43225r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "MSS: (AutoAdminLogon) Enable Automatic Logon (not recommended)" to "Disabled". Ensure no passwords are stored in the "DefaultPassword" registry value noted below. Registry Hive: HKEY_LOCAL_MACHINE Subkey: \Software\Microsoft\Windows NT\CurrentVersion\Winlogon\ Value Name: DefaultPassword

b

The built-in Windows password complexity policy must be enabled.

RMF Control: IA-5
Severity: Medium
CCI: CCI-000192
Version: 3.028
Vuln IDs: V-1150
Rule IDs: SV-29685r2_rule

The use of complex passwords increases their strength against attack. The built-in Windows password complexity policy requires passwords to contain at least 3 of the 4 types of characters (numbers, upper- and lower-case letters, and special characters), as well as preventing the inclusion of user names or parts of.System Administrator

Fix: F-71579r1_fix

Configure the policy value for Computer Configuration -> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> "Password must meet complexity requirements" to "Enabled".

a

Print driver installation privilege is not restricted to administrators.

RMF Control: CM-11
Severity: Low
CCI: CCI-001812
Version: 3.029
Vuln IDs: V-1151
Rule IDs: SV-29010r1_rule

By default, the print spooler allows any user to add and to delete printer drivers on the local system. This capability should be restricted to authorized personnel.trueSystem AdministratorInformation Assurance Officer

Fix: F-83r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Devices: Prevent users from installing printer drivers” to “Enabled”.

c

Anonymous access to the registry must be restricted.

RMF Control: AC-6
Severity: High
CCI: CCI-002235
Version: 3.030
Vuln IDs: V-1152
Rule IDs: SV-29595r3_rule

The registry is integral to the function, security, and stability of the Windows system. Some processes may require anonymous access to the registry. This must be limited to properly protect the system.trueSystem AdministratorInformation Assurance Officer

Fix: F-80415r1_fix

Maintain permissions at least as restrictive as the defaults listed below for the "winreg" registry key. It is recommended to not change the permissions from the defaults. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurePipeServers\winreg\ The following are the same for each permission listed: Type - Allow Inherited from - <not inherited> Columns: Name - Permission - Apply to Administrators - Full Control - This key and subkeys Backup Operators - Special - This key only (Special = Query Value, Enumerate Subkeys, Notify, Read Control (effectively = Read)) LOCAL SERVICE - Read - This key and subkeys

c

The Send download LanMan compatible password option is not set to Send NTLMv2 response only\refuse LM.

RMF Control: CM-6
Severity: High
CCI: CCI-000366
Version: 3.031
Vuln IDs: V-1153
Rule IDs: SV-29013r1_rule

The Kerberos v5 authentication protocol is the default for authentication of users who are logging on to domain accounts. NTLM is retained in later Windows versions for compatibility with clients and servers that are running earlier versions of Windows. It is also used to authenticate logons to stand-alone computers that are running later versions.trueSetting this to the required setting may prevent authentication with older Operating Systems and break some applications.System AdministratorInformation Assurance Officer

Fix: F-91r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Network security: LAN Manager authentication level” to at least “Send NTLMv2 response only\refuse LM”.

b

Ctrl+Alt+Del security attention sequence is Disabled.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 3.032
Vuln IDs: V-1154
Rule IDs: SV-29016r1_rule

Disabling the Ctrl+Alt+Del security attention sequence can compromise system security. Because only Windows responds to the Ctrl+Alt+Del security sequence, you can be assured that any passwords you enter following that sequence are sent only to Windows. If you eliminate the sequence requirement, malicious programs can request and receive your Windows password. Disabling this sequence also suppresses a custom logon banner.HKSystem Administrator

Fix: F-92r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Interactive Logon: Do not require CTRL ALT DEL” to “Disabled”.

b

The Deny access to this computer from the network user right on member servers must be configured to prevent access from highly privileged domain accounts and local administrator accounts on domain systems and unauthenticated access on all systems.

RMF Control: AC-3
Severity: Medium
CCI: CCI-000213
Version: WINUR-000017-MS
Vuln IDs: V-1155
Rule IDs: SV-29599r4_rule

Inappropriate granting of user rights can provide system, administrative, and other high level capabilities. The "Deny access to this computer from the network" right defines the accounts that are prevented from logging on from the network. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower trust systems helps mitigate the risk of privilege escalation from credential theft attacks which could lead to the compromise of an entire domain. Local administrator accounts on domain-joined systems must also be assigned this right to decrease the risk of lateral movement resulting from credential theft attacks. The Guests group must be assigned this right to prevent unauthenticated access.trueSystem Administrator

Fix: F-62411r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Deny access to this computer from the network" to include the following. Domain Systems Only: Enterprise Admins group Domain Admins group *All Local Administrator Accounts using the "DenyNetworkAccess" or "DeniedNetworkAccess" group (see V-45589). Do not use the built-in Administrators group. This group must contain the appropriate accounts/groups responsible for administering the system. All Systems: Guests group *Documentation and scripts supporting the use of this group to restrict local administrative accounts were changed at one point. The original name, "DeniedNetworkAccess", was changed to "DenyNetworkAccess". Automated benchmarks will look for either of these groups. Use of other methods will require manual validation.

b

The Smart Card removal option is set to take no action.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 3.047
Vuln IDs: V-1157
Rule IDs: SV-28472r1_rule

Determines what should happen when the smart card for a logged-on user is removed from the smart card reader. The options are: - No Action - Lock Workstation - Force LogofftrueHKSystem Administrator

Fix: F-105r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Interactive logon: Smart card removal behavior” to “Lock Workstation” or “Force Logoff”.

b

The Windows SMB server is not enabled to perform SMB packet signing when possible.

RMF Control: SC-8
Severity: Medium
CCI: CCI-002418
Version: 3.046
Vuln IDs: V-1162
Rule IDs: SV-29027r1_rule

If this policy is enabled, it causes the Windows Server Message Block (SMB) server to perform SMB packet signing.HKSystem Administrator

Fix: F-104r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Microsoft Network Server: Digitally sign communications (if Client agrees)” to “Enabled”.

b

Outgoing secure channel traffic is not encrypted when possible.

RMF Control: SC-8
Severity: Medium
CCI: CCI-002418
Version: 3.043
Vuln IDs: V-1163
Rule IDs: SV-29515r1_rule

Requests sent on the secure channel are authenticated, and sensitive information (such as passwords) is encrypted, but not all information is encrypted. If this policy is enabled, outgoing secure channel traffic should be encrypted.If the value for “Domain Member: Digitally encrypt or sign secure channel data (always)” is set to “Enabled”, then this would not be a finding. HKSystem Administrator

Fix: F-101r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Domain Member: Digitally encrypt secure channel data (when possible)” to “Enabled”.

b

Outgoing secure channel traffic is not signed when possible.

RMF Control: SC-8
Severity: Medium
CCI: CCI-002418
Version: 3.042
Vuln IDs: V-1164
Rule IDs: SV-29518r1_rule

Requests sent on the secure channel are authenticated, and sensitive information (such as passwords) is encrypted, but the channel is not integrity checked. If this policy is enabled, all outgoing secure channel traffic should be signed.If the value for “Domain Member: Digitally encrypt or sign secure channel data (always)” is set to “Enabled”, then this would not be a finding.HKSystem Administrator

Fix: F-100r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Domain Member: Digitally sign secure channel data (when possible)” to “Enabled”.

a

The computer account password is prevented from being reset.

RMF Control: CM-6
Severity: Low
CCI: CCI-000366
Version: 3.044
Vuln IDs: V-1165
Rule IDs: SV-29030r1_rule

As a part of Windows security, computer account passwords are changed automatically. Enabling this policy to disable automatic password changes can make the system more vulnerable to malicious access. Frequent password changes can be a significant safeguard for your system. If this policy is disabled, a new password for the computer account will be generated every week.HKSystem Administrator

Fix: F-102r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Domain Member: Disable Machine Account Password Changes” to “Disabled”.

b

The Windows SMB client is not enabled to perform SMB packet signing when possible.

RMF Control: SC-8
Severity: Medium
CCI: CCI-002418
Version: 3.045
Vuln IDs: V-1166
Rule IDs: SV-29033r1_rule

If this policy is enabled, it causes the Windows Server Message Block (SMB) client to perform SMB packet signing when communicating with an SMB server that is enabled or required to perform SMB packet signing.HKSystem Administrator

Fix: F-103r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Microsoft Network Client: Digitally sign communications (if server agrees)” to “Enabled”.

b

Ejection of removable NTFS media is not restricted to Administrators.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 3.052
Vuln IDs: V-1171
Rule IDs: SV-29217r1_rule

Removable hard drives can be formatted and ejected by others who are not members of the Administrators Group, if they are not properly configured. Formatting and ejecting removable NTFS media should only be done by administrators.HKSystem Administrator

Fix: F-113r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Devices: Allowed to Format and Eject Removable Media” to “Administrators”.

a

Users are not warned in advance that their passwords will expire.

RMF Control: CM-6
Severity: Low
CCI: CCI-000366
Version: 3.054
Vuln IDs: V-1172
Rule IDs: SV-29220r1_rule

This setting configures the system to display a warning to users telling them how many days are left before their password expires. By giving the user advanced warning, the user has time to construct a sufficiently strong password.HKSystem Administrator

Fix: F-114r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Interactive Logon: Prompt user to change password before expiration” to “14” days or more.

a

The default permissions of Global system objects are not increased.

RMF Control: CM-6
Severity: Low
CCI: CCI-000366
Version: 3.055
Vuln IDs: V-1173
Rule IDs: SV-29223r1_rule

Windows system maintains a global list of shared system resources such as DOS device names, mutexes, and semaphores. Each type of object is created with a default DACL that specifies who can access the objects with what permissions. If this policy is enabled, the default DACL is stronger, allowing non-admin users to read shared objects, but not modify shared objects that they did not create.HKSystem Administrator

Fix: F-28815r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “System Objects: Strengthen default permissions of internal system objects (e.g. Symbolic links)” to “Enabled”.

a

The amount of idle time required before suspending a session must be properly set.

RMF Control: SC-10
Severity: Low
CCI: CCI-001133
Version: 4.028
Vuln IDs: V-1174
Rule IDs: SV-29226r2_rule

Open sessions can increase the avenues of attack on a system. This setting is used to control when a computer disconnects an inactive SMB session. If client activity resumes, the session is automatically re-established. This protects critical and sensitive network data from exposure to unauthorized personnel with physical access to the computer.HKSystem Administrator

Fix: F-66919r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Microsoft Network Server: Amount of idle time required before suspending session" to "15" minutes or less.

b

Reversible password encryption is not disabled.

RMF Control: IA-5
Severity: Medium
CCI: CCI-000196
Version: 3.057
Vuln IDs: V-2372
Rule IDs: SV-29689r1_rule

Storing passwords using reversible encryption is essentially the same as storing clear-text versions of the passwords. For this reason, this policy should never be enabled.System Administrator

Fix: F-115r1_fix

Configure the system to prevent passwords from being saved using reverse encryption.

c

The system is configured to autoplay removable media.

RMF Control: CM-7
Severity: High
CCI: CCI-001764
Version: 3.059
Vuln IDs: V-2374
Rule IDs: SV-29526r1_rule

Autoplay begins reading from a drive as soon as you insert media in the drive. As a result, the setup file of programs and the music on audio media starts immediately. By default, Autoplay is disabled on removable drives, such as the floppy disk drive (but not the CD-ROM drive), and on network drives. If you enable this policy, you can also disable Autoplay on all drives.HKHKSystem Administrator

Fix: F-20417r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> AutoPlay Policies -> “Turn off AutoPlay” to “Enabled:All Drives”. Note: This was previously configured in the checklist using the Security Option setting “MSS: (NoDriveTypeAutorun) Disable Autorun on all drives” set to “255, disable Autorun for all drives”. This updates the same registry value (NoDriveTypeAutorun) as the Administrative Template.

c

Unauthorized named pipes are accessible with anonymous credentials.

RMF Control: SC-4
Severity: High
CCI: CCI-001090
Version: 3.063
Vuln IDs: V-3338
Rule IDs: SV-16933r1_rule

This is a Category 1 finding because the potential for gaining unauthorized system access. Pipes are internal system communications processes. They are identified internally by ID numbers that vary between systems. To make access to these processes easier, these pipes are given names that do not vary between systems. This setting controls which of these pipes anonymous users may access.System Administrator

Fix: F-28868r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Network access: Named pipes that can be accessed anonymously” as defined in the Check section.

c

Unauthorized registry paths are remotely accessible.

RMF Control: SC-4
Severity: High
CCI: CCI-001090
Version: 3.064
Vuln IDs: V-3339
Rule IDs: SV-28589r1_rule

This is a Category 1 finding because it could give unauthorized individuals access to the Registry. It controls which registry paths are accessible from a remote computer.System Administrator

Fix: F-28869r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Network access: Remotely accessible registry paths” as defined in the Check section.

c

Unauthorized shares can be accessed anonymously.

RMF Control: SC-4
Severity: High
CCI: CCI-001090
Version: 3.065
Vuln IDs: V-3340
Rule IDs: SV-29704r1_rule

This is a Category 1 finding because the potential for gaining unauthorized system access. Any shares listed can be accessed by any network user. This could lead to the exposure or corruption of sensitive data. Enabling this setting is very dangerous.HKSystem Administrator

Fix: F-28819r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Network access: Shares that can be accessed anonymously” to be defined but containing no entries (Blank).

c

Solicited Remote Assistance is allowed.

RMF Control: SC-4
Severity: High
CCI: CCI-001090
Version: 3.068
Vuln IDs: V-3343
Rule IDs: SV-29230r1_rule

This setting controls whether or not solicited remote assistance is allowed from this computer. Solicited assistance is help that is specifically requested by the user. This is a Category 1 finding because it may allow unauthorized parties access to the resources on the computer.HKSystem Administrator

Fix: F-6777r1_fix

Configure the system to disable Remote Assistance by setting the policy value for Computer Configuration -> Administrative Templates -> System -> Remote Assistance “Solicited Remote Assistance” to “Disabled”.

c

The use of local accounts with blank passwords is not restricted to console logons only.

RMF Control: CM-6
Severity: High
CCI: CCI-000366
Version: 4.036
Vuln IDs: V-3344
Rule IDs: SV-29234r1_rule

This is a Category 1 finding because no accounts with blank passwords should exist on a system. The password policy should prevent this from occurring. However, if a local account with a blank password does exist, enabling this setting will limit the account to local console logon only.HKSystem Administrator

Fix: F-5788r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Accounts: Limit local account use of blank passwords to console logon only” to “Enabled”.

b

The user is allowed to launch Windows Messenger (MSN Messenger, .NET Messenger).

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.017
Vuln IDs: V-3348
Rule IDs: SV-29239r1_rule

This setting prevents the Windows Messenger client from being run. Instant Messaging clients must be in compliance of with the Instant Messaging STIG. Windows Messenger should not be active on Windows unless the instant messaging system is a Managed Enterprise Service for unclassified data for which the DAA has approved.trueSystem AdministratorInformation Assurance Officer

Fix: F-5827r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Messenger “Do Not Allow Windows Messenger to be Run” to “Enabled”.

b

Windows Messenger (MSN Messenger, .NET messenger) is run at system startup.

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.018
Vuln IDs: V-3349
Rule IDs: SV-29244r1_rule

This setting prevents the automatic launch of Windows Messenger at user logon. Instant Messaging clients must be in compliance of with the Instant Messaging STIG. Windows Messenger should not be active on Windows unless the instant messaging system is a Managed Enterprise Service for unclassified data for which the DAA has approved.trueSystem AdministratorInformation Assurance Officer

Fix: F-5828r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Messenger “Do Not Automatically Start Windows Messenger Initially” to “Enabled”.

b

The system can be removed from the docking station without logging on first.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 3.069
Vuln IDs: V-3372
Rule IDs: SV-29708r1_rule

This setting controls the ability to undock the system without having to log on. Since the removal of a computer should be controlled, users should have to log on before undocking the computer to ensure that they have the appropriate rights to undock the system. In addition to software security settings, physical security should be in place to prevent unauthorized removal of computers.HKSystem Administrator

Fix: F-130r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Devices: Allow Undock Without Having to Log On” to “Disabled”.

a

The maximum age for machine account passwords is not set to requirements.

RMF Control: CM-6
Severity: Low
CCI: CCI-000366
Version: 4.043
Vuln IDs: V-3373
Rule IDs: SV-29247r1_rule

This setting controls the maximum password age that a machine account may have. This setting should be set to no more than 30 days, ensuring the machine changes its password monthly.HKSystem Administrator

Fix: F-34273r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Domain Member: Maximum Machine Account Password Age” to 30 or less, but not 0.

b

The system is not configured to require a strong session key.

RMF Control: SC-8
Severity: Medium
CCI: CCI-002418
Version: 4.044
Vuln IDs: V-3374
Rule IDs: SV-29251r1_rule

This setting controls the required strength of a session key. Setting this value in a domain containing Windows NT or older operating systems will prevent those systems from authenticating. This setting can also prevent a system from being joined to a domain.HKSystem AdministratorInformation Assurance Officer

Fix: F-5801r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Domain Member: Require Strong (Windows 2000 or Later) Session Key” to “Enabled”.

b

The system is configured to permit storage of credentials or .NET Passports.

RMF Control: IA-11
Severity: Medium
CCI: CCI-002038
Version: 3.070
Vuln IDs: V-3376
Rule IDs: SV-29259r1_rule

This setting controls the storage of authentication credentials or .NET passports on the local system. Such credentials should never be stored on the local machine as that may lead to account compromise.HKSystem Administrator

Fix: F-132r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Network access: Do not allow storage of credentials or .NET passports for network authentication” to “Enabled”.

b

The system is configured to give anonymous users Everyone rights.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 3.071
Vuln IDs: V-3377
Rule IDs: SV-29264r1_rule

This setting helps define the permissions that anonymous users have. If this setting is enabled then anonymous users have the same rights and permissions as the built-in Everyone group. Anonymous users should not have these permissions or rights.HKSystem AdministratorInformation Assurance Officer

Fix: F-133r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Network access: Let everyone permissions apply to anonymous users” to “Disabled”.

b

The system is not configured to use the Classic security model.

RMF Control: SC-4
Severity: Medium
CCI: CCI-001090
Version: 3.072
Vuln IDs: V-3378
Rule IDs: SV-29267r1_rule

Windows includes two network-sharing security models - Classic and Guest only. With the classic model, local accounts must be password protected; otherwise, anyone can use guest user accounts to access shared system resources.HKSystem Administrator

Fix: F-134r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Network access: Sharing and security model for local accounts” to “Classic - local users authenticate as themselves”.

c

The system is configured to store the LAN Manager hash of the password in the SAM.

RMF Control: IA-5
Severity: High
CCI: CCI-000196
Version: 3.073
Vuln IDs: V-3379
Rule IDs: SV-29270r1_rule

This setting controls whether or not a LAN Manager hash of the password is stored in the SAM the next time the password is changed. The LAN Manager hash is a weak encryption algorithm and there are several tools available that use this hash to retrieve account passwords.HKSystem AdministratorInformation Assurance Officer

Fix: F-141r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Network security: Do not store LAN Manager hash value on next password change” to “Enabled”.

b

The system is not configured to recommended LDAP client signing requirements.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 3.075
Vuln IDs: V-3381
Rule IDs: SV-29273r1_rule

This setting controls the signing requirements for LDAP clients. This setting should be set to Negotiate signing or Require signing depending on the environment and type of LDAP server in use.HKSystem Administrator

Fix: F-143r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Network security: LDAP client signing requirements” to “Negotiate signing” at a minimum.

b

The system is not configured to meet the minimum requirement for session security for NTLM SSP based Clients.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 3.076
Vuln IDs: V-3382
Rule IDs: SV-29530r1_rule

Microsoft has implemented a variety of security support providers for use with RPC sessions. In a homogenous Windows environment, all of the options should be enabled and testing should be performed in a heterogeneous environment to determine the maximum-security level that provides reliable functionality.trueMicrosoft warns that setting these may prevent the client from communicating with legacy servers that do not support them. “Require NTLMv2 session security” will prevent authentication, if the “Network security: LAN Manager authentication level” is set to permit NTLM or LM authentication. System AdministratorInformation Assurance Officer

Fix: F-28826r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Network security: Minimum session security for NTLM SSP based (including secure RPC) clients” to “Require NTLMv2 session security”, ”Require 128-bit encryption” (all options selected).

b

The system is not configured to use FIPS compliant Algorithms for Encryption, Hashing, and Signing.

RMF Control: SC-13
Severity: Medium
CCI: CCI-002450
Version: 3.077
Vuln IDs: V-3383
Rule IDs: SV-29533r1_rule

This setting ensures that the system uses algorithms that are FIPS compliant for encryption, hashing, and signing. FIPS compliant algorithms meet specific standards established by the U.S. Government and should be the algorithms used for all OS encryption functions.Clients with this setting enabled will not be able to communicate via digitally encrypted or signed protocols with servers that do not support these algorithms. Both the Browser and Web Server must be configured to use TLS, or the browser will not be able to connect to a secure site.HKSystem Administrator

Fix: F-5681r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing” to “Enabled”.

b

The system must be configured to require case insensitivity for non-Windows subsystems.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 3.078
Vuln IDs: V-3385
Rule IDs: SV-29536r2_rule

This setting controls the behavior of non-Windows subsystems when dealing with the case of arguments or commands. Case sensitivity could lead to the access of files or commands that must be restricted. To prevent this from happening, case insensitivity restrictions must be required.HKSystem Administrator

Fix: F-65639r2_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "System Objects: Require case insensitivity for non-Windows subsystems" to "Enabled".

b

Terminal Services is not configured to limit users to one remote session (Terminal Server Role)

RMF Control: AC-10
Severity: Medium
CCI: CCI-000054
Version: 5.038
Vuln IDs: V-3449
Rule IDs: SV-16938r1_rule

This setting limits users to one remote session. It is possible, if this setting is disabled, for users to establish multiple sessions.System AdministratorInformation Assurance Officer

Fix: F-16009r1_fix

2008 - Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Terminal Services -> Terminal Server -> Connections “Restrict Terminal Server users to a Single Remote Session” to “Enabled”.

b

Terminal Services is not configured with the client connection encryption set to the required level.

RMF Control: AC-17
Severity: Medium
CCI: CCI-000068
Version: 5.043
Vuln IDs: V-3454
Rule IDs: SV-16953r2_rule

Remote connections must be encrypted to prevent interception of data or sensitive information. Selecting “High Level” will ensure encryption of Terminal Services sessions in both directions.HKSystem Administrator

Fix: F-16023r2_fix

2008 - Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Terminal Services ->Terminal Server -> Security “Set Client Connection Encryption Level” will be set to “Enabled” and select “High Level” for the “Encryption Level”.

b

Terminal Services is configured to use a common temporary folder for all sessions (Terminal Server Role).

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 5.044
Vuln IDs: V-3455
Rule IDs: SV-29101r1_rule

This setting, which is located under the Temporary Folders section of the Terminal Services configuration option, controls the use of per session temporary folders or of a communal temporary folder. If this setting is enabled, only one temporary folder is used for all terminal services sessions. If a communal temporary folder is used, it might be possible for users to access other users temporary folders.HKSystem Administrator

Fix: F-16024r1_fix

2008/Vista - Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Terminal Services -> Terminal Server -> Temporary Folders “Do Not Use Temp Folders per Session” will be set to “Disabled”.

b

Terminal Services is not configured to delete temporary folders (Terminal Server Role).

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 5.045
Vuln IDs: V-3456
Rule IDs: SV-29103r1_rule

This setting, which is located under the Temporary Folders section of the Terminal Services configuration option, controls the deletion of the temporary folders when the session is terminated. Temporary folders should always be deleted after a session is over to prevent hard disk clutter and potential leakage of information.HKSystem Administrator

Fix: F-16026r1_fix

2008/Vista - Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Terminal Services -> Terminal Server -> Temporary Folders “Do Not Delete Temp Folder upon Exit” will be set to “Disabled”.

b

The system is configured to prevent background refresh of Group Policy.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 3.080
Vuln IDs: V-3469
Rule IDs: SV-29606r2_rule

If this setting is enabled, then Group Policy settings are not refreshed while a user is currently logged on. This could lead to instances when a user does not have the latest changes to a policy applied and is therefore operating in an insecure context.HKSystem Administrator

Fix: F-5684r1_fix

Configure the system to require Group Policy background refresh by setting the policy value for Computer Configuration -> Administrative Templates -> System -> Group Policy “Turn Off Background Refresh of Group Policy” to “Disabled”.

b

The system is configured to allow unsolicited remote assistance offers.

RMF Control: SC-4
Severity: Medium
CCI: CCI-001090
Version: 3.082
Vuln IDs: V-3470
Rule IDs: SV-29283r1_rule

This setting controls whether unsolicited offers of help to this computer are allowed. The list of users allowed to offer remote assistance to this system is accessed by pressing the Helpers button.HKSystem Administrator

Fix: F-6776r1_fix

Configure the system to prevent unsolicited remote assistance offers by setting the policy value for Computer Configuration -> Administrative Templates -> System -> Remote Assistance “Offer Remote Assistance” to “Disabled”.

b

The system is not configured to use Safe DLL Search Mode.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 3.088
Vuln IDs: V-3479
Rule IDs: SV-29718r1_rule

The default search behavior, when an application calls a function in a Dynamic Link Library (DLL), is to search the current directory followed by the directories contained in the systems path environment variable. An unauthorized DLL inserted into an applications working directory could allow malicious code to be run on the system. Creating the following registry key and setting the appropriate value forces the system to search the %Systemroot% for the DLL before searching the current directory or the rest of the path.HKSystem Administrator

Fix: F-5699r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “MSS: (SafeDllSearchMode) Enable Safe DLL search mode (recommended)” to “Enabled”.

b

Media Player must be configured to prevent automatic checking for updates.

RMF Control: CM-11
Severity: Medium
CCI: CCI-001812
Version: 5.060
Vuln IDs: V-3480
Rule IDs: SV-40097r2_rule

Uncontrolled system updates can introduce issues to a system. The automatic check for updates performed by Windows Media Player must be disabled to ensure a constant platform and to prevent the introduction of unknown\untested software on the system.HKSystem Administrator

Fix: F-45025r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Media Player -> "Prevent Automatic Updates" to "Enabled".

b

The system is not configured to meet the minimum requirement for session security for NTLM SSP based Servers.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 3.089
Vuln IDs: V-3666
Rule IDs: SV-29357r1_rule

Microsoft has implemented a variety of security support providers for use with RPC sessions. In a homogenous Windows environment, all of the options should be enabled and testing should be performed in a heterogeneous environment to determine the maximum-security level that provides reliable functionality.trueMicrosoft warns that setting these may prevent the server from communicating with legacy clients that do not support them. “Require NTLMv2 session security” will prevent authentication, if the “Network security: LAN Manager authentication level” is set to permit NTLM or LM authentication. System AdministratorInformation Assurance Officer

Fix: F-28830r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Network security: Minimum session security for NTLM SSP based (including secure RPC) servers” to “Require NTLMv2 session security”, ”Require 128-bit encryption (all options selected).

a

The system must generate an audit event when the audit log reaches a percentage of full threshold.

RMF Control: AU-5
Severity: Low
CCI: CCI-000139
Version: 3.092
Vuln IDs: V-4108
Rule IDs: SV-29730r2_rule

Audit records may be lost if the security log becomes full. When the audit log reaches a given percent full, an audit event is written to the security log. An event is recorded as a success audit under the category of System. This option may be especially useful if the audit logs are set to be cleared manually.System AdministratorInformation Assurance OfficerECRR-1

Fix: F-63893r1_fix

If the system is configured to send audit records directly to an audit server, or automatically archive full logs, this is NA. This must be documented with the ISSO. Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "MSS: (WarningLevel) Percentage threshold for the security event log at which the system will generate a warning" to "90%" or less.

a

The system is configured to allow IP source routing.

RMF Control: CM-6
Severity: Low
CCI: CCI-000366
Version: 3.094
Vuln IDs: V-4110
Rule IDs: SV-29361r1_rule

Protects against IP source routing spoofing.HKSystem Administrator

Fix: F-5713r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “MSS: (DisableIPSourceRouting) IP source routing protection level (protects against packet spoofing)” to “Highest protection, source routing is completely disabled”.

a

The system is configured to redirect ICMP.

RMF Control: CM-6
Severity: Low
CCI: CCI-000366
Version: 3.095
Vuln IDs: V-4111
Rule IDs: SV-29364r1_rule

When disabled, forces ICMP to be routed via shortest path first.HKSystem Administrator

Fix: F-5715r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “MSS: (EnableICMPRedirect) Allow ICMP redirects to override OSPF generated routes” to “Disabled”.

a

The system is configured to detect and configure default gateway addresses.

RMF Control: SC-5
Severity: Low
CCI: CCI-002385
Version: 3.104
Vuln IDs: V-4112
Rule IDs: SV-29367r1_rule

Enables or disables the Internet Router Discovery Protocol (IRDP) used to detect and configure Default Gateway addresses on the computer.HKSystem Administrator

Fix: F-5730r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “MSS: (PerformRouterDiscovery) Allow IRDP to detect and configure Default Gateway addresses (could lead to DoS)” to “Disabled”.

a

The system is configured for a greater keep-alive time than recommended.

RMF Control: SC-5
Severity: Low
CCI: CCI-002385
Version: 3.097
Vuln IDs: V-4113
Rule IDs: SV-29610r1_rule

Controls how often TCP sends a keep-alive packet in attempting to verify that an idle connection is still intact.HKSystem Administrator

Fix: F-28004r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “MSS: (KeepAliveTime) How often keep-alive packets are sent in milliseconds” to “300000 or 5 minutes (recommended)” or less.

a

The system must be configured to ignore NetBIOS name release requests except from WINS servers.

RMF Control: SC-5
Severity: Low
CCI: CCI-002385
Version: 3.101
Vuln IDs: V-4116
Rule IDs: SV-29370r2_rule

Configuring the system to ignore name release requests, except from WINS servers, prevents a denial of service (DoS) attack. The DoS consists of sending a NetBIOS name release request to the server for each entry in the server's cache, causing a response delay in the normal operation of the servers WINS resolution capability.HKSystem Administrator

Fix: F-66921r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "MSS: (NoNameReleaseOnDemand) Allow the computer to ignore NetBIOS name release requests except from WINS servers" to "Enabled".

a

The system must limit how many times unacknowledged TCP data is retransmitted.

RMF Control: SC-5
Severity: Low
CCI: CCI-002385
Version: 5.098
Vuln IDs: V-4438
Rule IDs: SV-29373r2_rule

In a SYN flood attack, the attacker sends a continuous stream of SYN packets to a server, and the server leaves the half-open connections open until it is overwhelmed and no longer is able to respond to legitimate requests. HKSystem Administrator

Fix: F-66923r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "MSS: (TcpMaxDataRetransmissions) How many times unacknowledged data is retransmitted (3 recommended, 5 is default)" to "3" or less.

a

This check verifies that Windows is configured to have password protection take effect within a limited time frame when the screen saver becomes active.

RMF Control: CM-6
Severity: Low
CCI: CCI-000366
Version: 5.102
Vuln IDs: V-4442
Rule IDs: SV-29376r1_rule

Allowing more than several seconds makes the computer vulnerable to a potential attack from someone walking up to the console to attempt to log onto the system before the lock takes effect.An issue was identified where the Security Options files and analysis templates included the registry value for this setting as a Dword type however it should have been a String value. This has been reported to Microsoft and the Security Options files and analysis templates included with the checklists have been corrected as of the December 2008 release.HKSystem Administrator

Fix: F-28833r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “MSS: (ScreenSaverGracePeriod) The time in seconds before the screen saver grace period expires (0 recommended)” to “5” or less.

c

Unauthorized registry paths and sub-paths are remotely accessible.

RMF Control: SC-4
Severity: High
CCI: CCI-001090
Version: 3.108
Vuln IDs: V-4443
Rule IDs: SV-29732r1_rule

The registry is a database for computer configuration information, much of which is sensitive. An attacker could use this to facilitate unauthorized activities. To reduce the risk of this happening, it is also lowered by the fact that the default ACLs assigned throughout the registry are fairly restrictive and they help to protect it from access by unauthorized users. System Administrator

Fix: F-5739r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Network access: Remotely accessible registry paths and sub-paths” as specified in the Check section.

b

Users must be required to enter a password to access private keys stored on the computer.

RMF Control: IA-5
Severity: Medium
CCI: CCI-000186
Version: 3.109
Vuln IDs: V-4444
Rule IDs: SV-29733r3_rule

Configuring this setting so that users must provide a password (distinct from their domain password) every time they use a key makes it more difficult for an attacker to access locally stored user keys, even if the attacker takes control of the user's computer and determines their logon password. HKSystem Administrator

Fix: F-66925r1_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "System cryptography: Force strong key protection for user keys stored on the computer" to "User must enter a password each time they use a key".

a

Optional Subsystems are permitted to operate on the system.

RMF Control: CM-7
Severity: Low
CCI: CCI-000381
Version: 3.110
Vuln IDs: V-4445
Rule IDs: SV-29734r1_rule

The POSIX subsystem is an Institute of Electrical and Electronic Engineers (IEEE) standard that defines a set of operating system services. The POSIX Subsystem is required if the server supports applications that use that subsystem. The subsystem introduces a security risk relating to processes that can potentially persist across logins. That is, if a user starts a process and then logs out, there is a potential that the next user who logs in to the system could access the previous users process. This is dangerous because the process started by the first user may retain that users system privileges; anything the second user does with that process will be performed with the privileges of the first user. trueHKSystem Administrator

Fix: F-5741r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “System Settings: Optional Subsystems” to “Blank” (Configured with no entries).

b

Software certificate restriction policies are not enforced.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 3.111
Vuln IDs: V-4446
Rule IDs: SV-29735r1_rule

Software restriction policies help to protect users and computers from executing unauthorized code such as viruses and Trojans horses. HKSystem Administrator

Fix: F-5742r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “System Settings: Use Certificate Rules on Windows Executables for Software Restriction Policies” to “Enabled”.

b

The Terminal Server does not require secure RPC communication (Terminal Server Role).

RMF Control: AC-17
Severity: Medium
CCI: CCI-001453
Version: 5.103
Vuln IDs: V-4447
Rule IDs: SV-16952r1_rule

Allowing unsecure RPC communication exposes the server to man in the middle attacks and data disclosure attacks. A man in the middle attack occurs when an intruder captures packets between a client and server and modifies them before allowing the packets to be exchanged. Usually the attacker will modify the information in the packets in an attempt to cause either the client or server to reveal sensitive information. HKSystem Administrator

Fix: F-16022r1_fix

2008 - Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Terminal Services -> Terminal Server -> Security “Require secure RPC communication” will be set to “Enabled”.

b

Group Policy objects are not reprocessed if they have not changed.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 3.112
Vuln IDs: V-4448
Rule IDs: SV-29379r2_rule

Enabling this setting and then selecting the "Process even if the Group Policy objects have not changed" option ensures that the policies will be reprocessed even if none have been changed. This way, any unauthorized changes are forced to match the domain-based group policy settings again. HKSystem Administrator

Fix: F-34259r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Group Policy -> “Registry policy processing” to “Enabled”, and select the option “Process even if the Group Policy objects have not changed”. Windows Server 2008 has another policy setting in this area with the same title however with the first letters capitalized (Registry Policy Processing vs. Registry policy processing). The correct version for this requirement is the one that uses lower case. The other one can also be verified by viewing the Explain tab of the policy which will state “Registry Client-Side Extension (CSE) policy processing settings”.

b

Outgoing secure channel traffic is not encrypted or signed.

RMF Control: SC-8
Severity: Medium
CCI: CCI-002418
Version: 3.113
Vuln IDs: V-6831
Rule IDs: SV-29382r1_rule

Requests sent on the secure channel are authenticated, and sensitive information (such as passwords) is encrypted, but not all information is encrypted. If this policy is enabled, outgoing secure channel traffic will be encrypted and signed.HKSystem Administrator

Fix: F-6518r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Domain Member: Digitally encrypt or sign secure channel data (always)” to “Enabled”.

b

The Windows Server SMB client is not enabled to always perform SMB packet signing.

RMF Control: SC-8
Severity: Medium
CCI: CCI-002418
Version: 3.114
Vuln IDs: V-6832
Rule IDs: SV-29385r1_rule

If this policy is enabled, it causes the Windows Server Message Block (SMB) client to perform SMB packet signing when communicating with an SMB server that is enabled or required to perform SMB packet signing.If the environment is a mixed one, with down-level OSs, or maintains trusts with down-level OSs, then this to the required setting could cause compatibility problems. HKSystem Administrator

Fix: F-6519r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Microsoft Network Client: Digitally sign communications (always)” to “Enabled”.

b

The Windows Server SMB server is not enabled to always perform SMB packet signing.

RMF Control: SC-8
Severity: Medium
CCI: CCI-002418
Version: 3.115
Vuln IDs: V-6833
Rule IDs: SV-29392r1_rule

If this policy is enabled, it causes the Windows Server Message Block (SMB) server to always perform SMB packet signing.If the environment is a mixed one, with down-level OSs, or maintains trusts with down-level OSs, then configuring this to the required setting could cause compatibility problems. HKSystem Administrator

Fix: F-6520r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Microsoft Network Server: Digitally sign communications (always)” to “Enabled”.

c

Named Pipes and Shares can be accessed anonymously.

RMF Control: SC-4
Severity: High
CCI: CCI-001090
Version: 3.116
Vuln IDs: V-6834
Rule IDs: SV-29545r1_rule

This is a Category 1 finding because of the potential for gaining unauthorized system access. Pipes are internal system communications processes. They are identified internally by ID numbers that vary between systems. To make access to these processes easier, these pipes are given names that do not vary between systems. When this setting is disabled, Network shares can be accessed by any network user. This could lead to the exposure or corruption of sensitive data.HKSystem Administrator

Fix: F-6521r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Network access: Restrict anonymous access to Named Pipes and Shares” to “Enabled”.

b

For systems utilizing a logon ID as the individual identifier, passwords must be a minimum of 14 characters in length.

RMF Control: IA-5
Severity: Medium
CCI: CCI-000205
Version: 4.013
Vuln IDs: V-6836
Rule IDs: SV-29389r2_rule

Information systems not protected with strong password schemes including passwords of minimum length provide the opportunity for anyone to crack the password thus gaining access to the system and causing the device, information, or the local network to be compromised or a denial of service. Strong passwords may invite users to write down the passwords. Ensure that all users store passwords in a secured location.HKSystem AdministratorInformation Assurance Officer

Fix: F-53437r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Account Policies -> Password Policy -> "Minimum password length" to at least "14" characters.

b

Auditing records must be configured as required.

RMF Control: AU-12
Severity: Medium
CCI: CCI-000172
Version: 4.008-MS
Vuln IDs: V-6850
Rule IDs: SV-16967r3_rule

Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior.HKHKSystem AdministratorInformation Assurance Officer

Fix: F-71929r1_fix

Configure the system to audit subcategories as outlined below. Open a Command Prompt with elevated privileges. (Run as administrator) Execute the following command for each subcategory. Auditpol /set /subcategory:"subcategory name" /success:enable(disable) /failure:enable(disable) (Include the quotes around the subcategory name.) System Security System Extension - Success and Failure System Integrity - Success and Failure IPSec Driver - Success and Failure Security State Change - Success and Failure Logon/Logoff Logon - Success and Failure Logoff - Success Special Logon - Success Privilege Use Sensitive Privilege Use - Success and Failure Detailed Tracking Process Creation - Success Policy Change Audit Policy Change - Success and Failure Authentication Policy Change - Success Account Management User Account Management - Success and Failure Computer Account Management - Success and Failure Security Group Management - Success and Failure Other Account Management Events - Success and Failure Account Logon Credential Validation - Success and Failure

a

The system is configured to allow the display of the last user name on the logon screen.

RMF Control: CM-6
Severity: Low
CCI: CCI-000366
Version: 3.119
Vuln IDs: V-11806
Rule IDs: SV-29400r1_rule

The user name of the last user to log onto a system will not be displayed. This eliminates half of the Userid/Password equation that an unauthorized person would need to log on.HKSystem Administrator

Fix: F-11088r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Interactive logon: Do not display last user name” to “Enabled”.

b

Auditing Access of Global System Objects must be turned off.

RMF Control: SC-5
Severity: Medium
CCI: CCI-001095
Version: 3.123
Vuln IDs: V-14228
Rule IDs: SV-29402r2_rule

This setting prevents the system from setting up a default system access control list for certain system objects, which could create a very large number of security events, filling the security log in Windows and making it difficult to identify actual issues.HKSystem AdministratorECSC-1

Fix: F-45020r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "Audit: Audit the access of global system objects" to "Disabled".

b

Audit of Backup and Restore Privileges is not turned off.

RMF Control: SC-5
Severity: Medium
CCI: CCI-001095
Version: 3.124
Vuln IDs: V-14229
Rule IDs: SV-29404r1_rule

This policy setting stops the system from generating audit events for every file backed up or restored which could fill the Security log in Windows. HKSystem Administrator

Fix: F-13553r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Audit: Audit the use of Backup and Restore privilege” to “Disabled”.

b

Audit policy using subcategories is enabled.

RMF Control: AU-12
Severity: Medium
CCI: CCI-000169
Version: 3.125
Vuln IDs: V-14230
Rule IDs: SV-29550r1_rule

This policy setting allows administrators to enable the more precise auditing capabilities present in Windows Vista and later.System Administrator

Fix: F-13554r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings” to “Enabled”.

a

IPSec Exemptions are limited.

RMF Control: CM-6
Severity: Low
CCI: CCI-000366
Version: 3.127
Vuln IDs: V-14232
Rule IDs: SV-16835r1_rule

This check verifies that Windows is configured to limit IPSec exemptions.System Administrator

Fix: F-15854r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “MSS: (NoDefaultExempt) Configure IPSec exemptions for various types of network traffic” to “Only ISAKMP is exempt (recommended for Windows Server 2003)”.

b

User Account Control - Built In Admin Approval Mode

RMF Control: IA-11
Severity: Medium
CCI: CCI-002038
Version: 3.129
Vuln IDs: V-14234
Rule IDs: SV-29551r1_rule

This check verifies whether the built-in Administrator account runs in Admin Approval Mode.System Administrator

Fix: F-28841r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “User Account Control: Admin Approval Mode for the Built-in Administrator account” to “Enabled”.

b

User Account Control must, at minimum, prompt administrators for consent.

RMF Control: SC-3
Severity: Medium
CCI: CCI-001084
Version: 3.130
Vuln IDs: V-14235
Rule IDs: SV-14846r2_rule

User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting configures the elevation requirements for logged on administrators to complete a task that requires raised privileges.System Administrator

Fix: F-43222r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> "User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode" to "Prompt for consent". More secure options for this setting are also acceptable (e.g., Prompt for credentials).

b

User Account Control - Behavior of elevation prompt for standard users.

RMF Control: IA-11
Severity: Medium
CCI: CCI-002038
Version: 3.131
Vuln IDs: V-14236
Rule IDs: SV-28479r1_rule

This check verifies that standard users are automatically denied when attempting to complete a task that requires raised privileges.System Administrator

Fix: F-28843r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “User Account Control: Behavior of the elevation prompt for standard users” to “Automatically deny elevation requests”.

b

User Account Control - Detect Application Installations

RMF Control: SC-3
Severity: Medium
CCI: CCI-001084
Version: 3.132
Vuln IDs: V-14237
Rule IDs: SV-29552r1_rule

This check verifies whether Windows responds to application installation requests by prompting for credentials.System Administrator

Fix: F-28844r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “User Account Control: Detect application installations and prompt for elevation” to “Enabled”.

b

User Account Control - Elevate UIAccess applications that are in secure locations

RMF Control: SC-3
Severity: Medium
CCI: CCI-001084
Version: 3.134
Vuln IDs: V-14239
Rule IDs: SV-29553r1_rule

This check verifies whether Windows only allows applications installed in a secure location, such as the Program Files or the Windows\System32 folders, on the file system to run with elevated privileges.System Administrator

Fix: F-28845r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “User Account Control: Only elevate UIAccess applications that are installed in secure locations” to “Enabled”.

b

User Account Control - Run all admins in Admin Approval Mode

RMF Control: IA-11
Severity: Medium
CCI: CCI-002038
Version: 3.137
Vuln IDs: V-14240
Rule IDs: SV-29099r1_rule

This check verifies that UAC has not been disabled.System Administrator

Fix: F-28846r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “User Account Control: Run all administrators in Admin Approval Mode” to “Enabled”.

b

User Account Control - Switch to secure desktop

RMF Control: SC-3
Severity: Medium
CCI: CCI-001084
Version: 3.135
Vuln IDs: V-14241
Rule IDs: SV-29554r1_rule

This check verifies that the elevation prompt is only used in secure desktop mode.System Administrator

Fix: F-28847r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “User Account Control: Switch to the secure desktop when prompting for elevation” to “Enabled”.

b

User Account Control - Non UAC Compliant Application Virtualization

RMF Control: SC-3
Severity: Medium
CCI: CCI-001084
Version: 3.136
Vuln IDs: V-14242
Rule IDs: SV-29555r1_rule

This check verifies that non UAC compliant applications will run in virtualized file and registry entries allowing them to run.System Administrator

Fix: F-28848r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “User Account Control: Virtualize file and registry write failures to per-user locations” to “Enabled”.

b

Administrator accounts must not be enumerated during elevation.

RMF Control: SC-3
Severity: Medium
CCI: CCI-001084
Version: 5.132
Vuln IDs: V-14243
Rule IDs: SV-29556r2_rule

Enumeration of administrator accounts when elevating can provide part of the logon information to an unauthorized user. This setting configures the system to always require users to enter a username and password to elevate a running application.System Administrator

Fix: F-80985r1_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Credential User Interface >> "Enumerate administrator accounts on elevation" to "Disabled".

b

Terminal Services / Remote Desktop Service - Prevent password saving in the Remote Desktop Client

RMF Control: IA-11
Severity: Medium
CCI: CCI-002038
Version: 5.116
Vuln IDs: V-14247
Rule IDs: SV-29406r1_rule

This check verifies that the system is configured to prevent Users from saving passwords in the Remote Desktop Client.System Administrator

Fix: F-13572r1_fix

Vista - Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Terminal Services-> Remote Desktop Connection Client “Do not allow passwords to be saved” to “Enabled”.

b

Terminal Services / Remote Desktop Services - Local drives prevented from sharing with Terminal Servers (Terminal Server Role).

RMF Control: SC-4
Severity: Medium
CCI: CCI-001090
Version: 5.118
Vuln IDs: V-14249
Rule IDs: SV-29198r1_rule

This check verifies that the system is configured to prevent users from sharing the local drives on their client computers to Terminal Servers that they access.System Administrator

Fix: F-13574r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Terminal Services -> Terminal Server -> Device and Resource Redirection “Do not allow drive redirection” to “Enabled”.

b

Unauthenticated RPC clients must be restricted from connecting to the RPC server.

RMF Control: IA-3
Severity: Medium
CCI: CCI-001967
Version: 5.123-MS
Vuln IDs: V-14253
Rule IDs: SV-29409r2_rule

Configuring RPC to restrict unauthenticated RPC clients from connecting to the RPC server will prevent anonymous connections.HKSystem Administrator

Fix: F-62377r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Remote Procedure Call -> "Restrictions for Unauthenticated RPC clients" to "Enabled" and "Authenticated".

b

File and Folder Publish to Web option unavailable.

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.125
Vuln IDs: V-14255
Rule IDs: SV-29413r1_rule

This check verifies that the system is configured to make the options to publish to the web unavailable from File and Folder Tasks in Windows folders.HKSystem Administrator

Fix: F-13580r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication setting ‘Turn off the "Publish to Web" task for files and folders’ to “Enabled”.

b

Web Publishing and online ordering wizards prevented from downloading list of providers.

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.126
Vuln IDs: V-14256
Rule IDs: SV-29416r1_rule

This check verifies that the system is configured to prevent Windows from downloading a list of providers for the Web publishing and online ordering wizards.HKSystem Administrator

Fix: F-13581r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication setting ‘Turn off Internet download for Web publishing and online ordering wizards’ to “Enabled”.

b

Windows Messenger prevented from collecting anonymous information.

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.127
Vuln IDs: V-14257
Rule IDs: SV-29418r1_rule

This check verifies that the system is configured to prevent Windows Messenger from collecting anonymous information about how the Windows Messenger software and service is used.HKSystem Administrator

Fix: F-13582r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication setting ‘Turn off the Windows Messenger Customer Experience Improvement Program’ to “Enabled”.

b

Search Companion prevented from automatically downloading content updates.

RMF Control: CM-11
Severity: Medium
CCI: CCI-001812
Version: 5.128
Vuln IDs: V-14258
Rule IDs: SV-29420r1_rule

This check verifies that the system is configured to prevent Search Companion from automatically downloading content updates during local and Internet searches.HKSystem Administrator

Fix: F-13583r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication setting ‘Turn off Search Companion content file updates’ to “Enabled”.

b

Prevent printing over HTTP.

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.129
Vuln IDs: V-14259
Rule IDs: SV-29422r1_rule

This check verifies that the system is configured to prevent the client computer’s ability to print over HTTP, which allows the computer to print to printers on the intranet as well as the Internet.HKSystem Administrator

Fix: F-13584r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication setting ‘Turn off printing over HTTP’ to “Enabled”.

b

Computer prevented from downloading print driver packages over HTTP.

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.130
Vuln IDs: V-14260
Rule IDs: SV-29424r1_rule

This check verifies that the system is configured to prevent the computer from downloading print driver packages over HTTP.HKSystem Administrator

Fix: F-13585r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication setting ‘Turn off downloading of print drivers over HTTP’ to “Enabled”.

b

Windows is prevented from using Windows Update to search for drivers.

RMF Control: CM-11
Severity: Medium
CCI: CCI-001812
Version: 5.131
Vuln IDs: V-14261
Rule IDs: SV-29426r1_rule

This check verifies that the system is configured to prevent Windows from searching Windows Update for device drivers when no local drivers for a device are present.HKSystem Administrator

Fix: F-13586r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication setting ‘Turn off Windows Update device driver searching’ to “Enabled”.

b

The HBSS McAfee Agent must be installed.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 5.140
Vuln IDs: V-15505
Rule IDs: SV-29560r3_rule

The McAfee Agent is the client side distributed component of McAfee ePolicy Orchestrator (McAfee ePO) which provides a secure communication channel between the ePO server and managed point products.System Administrator

Fix: F-76987r1_fix

Deploy the McAfee Agent as detailed in accordance with the DoD HBSS STIG.

b

Windows Peer to Peer Networking

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.202
Vuln IDs: V-15666
Rule IDs: SV-29428r1_rule

This check verifies Microsoft Peer-to-Peer Networking Service is turned off.HKSystem Administrator

Fix: F-15530r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Network -> Microsoft Peer-to-Peer Networking Services “Turn Off Microsoft Peer-to-Peer Networking Services” to “Enabled”.

b

Prohibit Network Bridge in Windows

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.203
Vuln IDs: V-15667
Rule IDs: SV-29430r1_rule

This check verifies the Network Bridge can not be installed and configured. System Administrator

Fix: F-15533r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Network -> Network Connections “Prohibit installation and configuration of Network Bridge on your DNS domain network” to “Enabled”.

a

Event Viewer Events.asp links must be turned off.

RMF Control: CM-7
Severity: Low
CCI: CCI-000381
Version: 5.214
Vuln IDs: V-15672
Rule IDs: SV-21932r2_rule

Viewing events is a function of administrators, who must not access the internet with privileged accounts. This setting will disable Events.asp hyperlinks in Event Viewer to prevent links to the internet from within events. System Administrator

Fix: F-20476r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication settings “Turn off Event Viewer “Events.asp” links” to “Enabled”.

a

Internet Connection Wizard ISP Downloads

RMF Control: CM-7
Severity: Low
CCI: CCI-000381
Version: 5.216
Vuln IDs: V-15673
Rule IDs: SV-29437r1_rule

This check verifies that the Internet Connection Wizard cannot download a list of Internet Service Providers (ISPs) from Microsoft.HKSystem Administrator

Fix: F-15540r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication settings “Turn off Internet Connection Wizard if URL connection is referring to Microsoft.com” to “Enabled”.

b

Disable Internet File Association Service

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.217
Vuln IDs: V-15674
Rule IDs: SV-29439r1_rule

This check verifies that unhandled file associations will not use the Microsoft Web service to find an application.HKSystem Administrator

Fix: F-15541r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication settings “Turn off Internet File Association service” to “Enabled”.

a

Windows Registration Wizard

RMF Control: CM-7
Severity: Low
CCI: CCI-000381
Version: 5.218
Vuln IDs: V-15675
Rule IDs: SV-29441r1_rule

This check verifies that the Windows Registration Wizard is blocked from online registration.HKSystem Administrator

Fix: F-15542r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication settings “Turn off Registration if URL connection is referring to Microsoft.com” to “Enabled”.

a

Order Prints Online

RMF Control: CM-7
Severity: Low
CCI: CCI-000381
Version: 5.219
Vuln IDs: V-15676
Rule IDs: SV-29614r1_rule

This check verifies that the “Order Prints Online” task is not available in Windows Explorer.System Administrator

Fix: F-15543r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication settings “Turn off the “Order Prints” picture task” to “Enabled”.

b

Windows Movie Maker Codec Downloads

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.220
Vuln IDs: V-15677
Rule IDs: SV-29443r1_rule

This check verifies that the codecs will not be automatically downloaded for Windows Movie Maker.HKSystem Administrator

Fix: F-15544r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication settings “Turn off Windows Movie Maker automatic codec downloads” to “Enabled”.

b

Windows Movie Maker Web Links

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.221
Vuln IDs: V-15678
Rule IDs: SV-29445r1_rule

This check verifies that the links to web sites in Windows Movie Maker will not be available.HKSystem Administrator

Fix: F-15545r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication settings “Turn off Windows Movie Maker online Web links” to “Enabled”.

b

Windows Movie Maker Online Hosting

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.222
Vuln IDs: V-15679
Rule IDs: SV-29447r1_rule

This check verifies that movies can not be sent to a video hosting provider on the web.HKSystem Administrator

Fix: F-15546r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication settings “Turn off Windows Movie Maker saving to online video hosting provider” to “Enabled”.

a

The classic logon screen must be required for user logons.

RMF Control: CM-6
Severity: Low
CCI: CCI-000366
Version: 5.223-MS
Vuln IDs: V-15680
Rule IDs: SV-29449r2_rule

The classic logon screen requires users to enter a logon name and password to access a system. The simple logon screen or Welcome screen displays usernames for selection, providing part of the necessary logon information.System Administrator

Fix: F-63539r2_fix

If the system is a member of a domain, this is NA. Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Logon -> "Always use classic logon" to "Enabled".

b

Attachments must be prevented from being downloaded from RSS feeds.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 5.231
Vuln IDs: V-15682
Rule IDs: SV-29451r2_rule

Attachments from RSS feeds may not be secure. This setting will prevent attachments from being downloaded from RSS feeds.HKSystem Administrator

Fix: F-62317r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> RSS Feeds -> "Turn off downloading of enclosures" to "Enabled".

b

Windows Explorer – Shell Protocol Protected Mode

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 5.240
Vuln IDs: V-15683
Rule IDs: SV-29453r1_rule

This check verifies that the shell protocol is run in protected mode. (This allows applications to only open limited folders.)HKSystem Administrator

Fix: F-15550r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Explorer “Turn off shell protocol protected mode” to “Disabled”.

b

Windows Installer – IE Security Prompt

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 5.241
Vuln IDs: V-15684
Rule IDs: SV-29455r1_rule

This check verifies that users are notified if a web-based program attempts to install software. HKSystem Administrator

Fix: F-15551r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Installer “Disable IE security prompt for Windows Installer scripts” to “Disabled”.

b

Windows Installer – User Control

RMF Control: CM-11
Severity: Medium
CCI: CCI-001812
Version: 5.242
Vuln IDs: V-15685
Rule IDs: SV-29457r1_rule

This check verifies that users are prevented from changing installation options.HKSystem Administrator

Fix: F-15552r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Installer “Enable user control over installs” to “Disabled”.

a

Windows Installer – Vendor Signed Updates

RMF Control: CM-11
Severity: Low
CCI: CCI-001812
Version: 5.243
Vuln IDs: V-15686
Rule IDs: SV-29459r1_rule

This check verifies that users are prevented applying vendor signed updates.HKSystem Administrator

Fix: F-15553r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Installer “Prohibit non-administrators from applying vendor signed updates” to “Enabled”.

a

Media Player – First Use Dialog Boxes

RMF Control: CM-6
Severity: Low
CCI: CCI-000366
Version: 5.248
Vuln IDs: V-15687
Rule IDs: SV-29461r1_rule

This check verifies that users are not presented with Privacy and Installation options on first use of Windows Media Player.System Administrator

Fix: F-15554r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Media Player “Do Not Show First Use Dialog Boxes” to “Enabled”.

b

Network – Mapper I/O Driver

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.200
Vuln IDs: V-15696
Rule IDs: SV-29561r1_rule

This check verifies that the Mapper I/O network protocol driver is disabled.System Administrator

Fix: F-15588r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Network -> Link-Layer Topology Discovery “Turn on Mapper I/O (LLTDIO) driver” to “Disabled”.

b

Network – Responder Driver

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.201
Vuln IDs: V-15697
Rule IDs: SV-29562r1_rule

This check verifies that the Responder network protocol driver is disabled.System Administrator

Fix: F-15589r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Network -> Link-Layer Topology Discovery “Turn on Responder (RSPNDR) driver” to “Disabled”.

b

Network – Windows Connect Now Wireless Configuration

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.206
Vuln IDs: V-15698
Rule IDs: SV-29759r1_rule

This check verifies that the configuration of wireless devices using Windows Connect Now is disabled.System Administrator

Fix: F-15590r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Network -> Windows Connect Now “Configuration of wireless settings using Windows Connect Now” to “Disabled”.

b

Network – Windows Connect Now Wizards

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.207
Vuln IDs: V-15699
Rule IDs: SV-29563r1_rule

This check verifies that access to the Windows Connect Now wizards is disabled.System Administrator

Fix: F-15591r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Network -> Windows Connect Now “Prohibit Access of the Windows Connect Now wizards” to “Enabled”.

a

Driver Install – Device Driver Search Prompt

RMF Control: CM-11
Severity: Low
CCI: CCI-001812
Version: 5.211
Vuln IDs: V-15703
Rule IDs: SV-29564r1_rule

This check verifies that users will not be prompted to search Windows Updated for device drivers.System Administrator

Fix: F-15595r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Driver Installation “Turn off Windows Update device driver search prompt” to “Enabled”.

a

Remote Assistance – Session Logging

RMF Control: CM-6
Severity: Low
CCI: CCI-000366
Version: 5.226
Vuln IDs: V-15707
Rule IDs: SV-29565r1_rule

This check verifies that Remote Assistance log files will be generated.System Administrator

Fix: F-15599r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Remote Assistance “Turn on session logging” to “Enabled”.

b

Online Assistance – Untrusted Content

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 5.230
Vuln IDs: V-15710
Rule IDs: SV-29566r1_rule

This check verifies that untrusted content is not rendered for online assistance.System Administrator

Fix: F-15602r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Online Assistance “Turn off Untrusted Content” to “Enabled”.

b

Search – Encrypted Files Indexing

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.232
Vuln IDs: V-15711
Rule IDs: SV-29567r1_rule

This check verifies that encrypted files are not indexed.System Administrator

Fix: F-15603r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Search “Allow indexing of encrypted files” to “Disabled”.

b

Defender – SpyNet Reporting

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.234
Vuln IDs: V-15713
Rule IDs: SV-29572r1_rule

This check verifies that SpyNet membership is disabled.System Administrator

Fix: F-15605r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Defender “Configure Microsoft Spynet Reporting” to “Disabled”.

a

Windows Explorer – Heap Termination

RMF Control: SC-5
Severity: Low
CCI: CCI-002385
Version: 5.239
Vuln IDs: V-15718
Rule IDs: SV-29576r2_rule

This check verifies that heap termination on corruption is disabled. This may prevent Windows Explorer from terminating immediately from certain legacy plug-in applications.System Administrator

Fix: F-15610r2_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Explorer “Turn off heap termination on corruption” to “Disabled”.

a

Windows Mail – Communities

RMF Control: CM-7
Severity: Low
CCI: CCI-000381
Version: 5.245
Vuln IDs: V-15720
Rule IDs: SV-29578r1_rule

This check verifies that Windows Mail will not check newsgroups for Communities support.System Administrator

Fix: F-15612r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Mail “Turn off the communities features” to “Enabled”

b

Windows Mail – Disable Application

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.246
Vuln IDs: V-15721
Rule IDs: SV-29579r1_rule

This check verifies that Windows Mail will be disabled.System Administrator

Fix: F-15613r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Mail “Turn off Windows Mail application” to “Enabled”

b

Media DRM – Internet Access

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.247
Vuln IDs: V-15722
Rule IDs: SV-29580r1_rule

This check verifies that Windows Media Digital Rights Management will be prevented from accessing the internet.System Administrator

Fix: F-15614r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Windows Media Digital Rights Management “Prevent Windows Media DRM Internet Access” to “Enabled”.

b

Software certificate installation files must be removed from Windows 2008.

RMF Control: CM-6
Severity: Medium
CCI: CCI-000366
Version: 2.021
Vuln IDs: V-15823
Rule IDs: SV-29465r2_rule

Use of software certificates and their accompanying installation files for end users to access resources is less secure than the use of hardware-based certificates.HKSystem Administrator

Fix: F-85463r1_fix

Remove any certificate installation files (*.p12 and *.pfx) found on a system. This does not apply to server-based applications that have a requirement for certificate files or non-certificate installation files with the same extension.

b

UAC - Allow UIAccess applications to prompt for elevation without using the secure desktop

RMF Control: SC-3
Severity: Medium
CCI: CCI-001084
Version: 3.138
Vuln IDs: V-15991
Rule IDs: SV-16934r1_rule

This check verifies whether User Interface Accessibility programs can automatically disable the secure desktop for elevation prompts for a standard user.System Administrator

Fix: F-28854r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “User Account Control: Allow UIAccess applications to prompt for elevation without using the secure desktop” to “Disabled”.

b

Terminal Services – Prevent COM Port Redirection (Terminal Server Role).

RMF Control: AC-17
Severity: Medium
CCI: CCI-002314
Version: 5.074
Vuln IDs: V-15997
Rule IDs: SV-16941r1_rule

This check verifies that the system is configured to prevent users from mapping local COM ports and redirecting data from the Terminal Server to local COM ports.System Administrator

Fix: F-16012r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Terminal Services -> Terminal Server -> Device and Resource Redirection “Do not allow COM port redirection” to “Enabled”.

b

Terminal Services – Prevent LPT Port Redirection (Terminal Server Role).

RMF Control: AC-17
Severity: Medium
CCI: CCI-002314
Version: 5.075
Vuln IDs: V-15998
Rule IDs: SV-16942r1_rule

This check verifies that the system is configured to prevent users from mapping local LPT ports and redirecting data from the Terminal Server to local LPT ports.System Administrator

Fix: F-16013r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Terminal Services -> Terminal Server -> Device and Resource Redirection “Do not allow LPT port redirection” to “Enabled”.

b

Terminal Services – Prevent Plug and Play Device Redirection (Terminal Server Role).

RMF Control: AC-17
Severity: Medium
CCI: CCI-002314
Version: 5.076
Vuln IDs: V-15999
Rule IDs: SV-16943r1_rule

This check verifies that the system is configured to prevent users from redirecting Plug and Play devices to the Terminal Services session.System Administrator

Fix: F-16014r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Terminal Services -> Terminal Server -> Device and Resource Redirection “Do not allow supported Plug and Play device redirection” to “Enabled”.

b

Terminal Services – Smart Card Device Redirection Enabled (Terminal Server Role).

RMF Control: AC-17
Severity: Medium
CCI: CCI-002314
Version: 5.077
Vuln IDs: V-16000
Rule IDs: SV-16944r1_rule

This check verifies that the system is configured to ensure smart card devices can be redirected to the Terminal Services session.System Administrator

Fix: F-16015r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Terminal Services -> Terminal Server -> Device and Resource Redirection “Do not allow smart card device redirection” to “Disabled”.

a

Terminal Services – Default Only Client Printer Redirection (Terminal Server Role).

RMF Control: AC-17
Severity: Low
CCI: CCI-002314
Version: 5.078
Vuln IDs: V-16001
Rule IDs: SV-16945r1_rule

This check verifies that the system is configured to allow only the default client printer to be redirected in the Terminal Services session.System Administrator

Fix: F-16016r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> Windows Components -> Terminal Services -> Terminal Server -> Printer Redirection “Redirect only the default client printer” to “Enabled”.

b

UAC - Application Elevations

RMF Control: SC-3
Severity: Medium
CCI: CCI-001084
Version: 3.140
Vuln IDs: V-16008
Rule IDs: SV-16960r1_rule

This check verifies that Windows elevates all applications, not just signed ones.System Administrator

Fix: F-28963r1_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> “User Account Control: Only elevate executables that are signed and validated” to “Disabled”.

b

Windows Customer Experience Improvement Program is disabled.

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: 5.254
Vuln IDs: V-16020
Rule IDs: SV-29581r1_rule

This check verifies that the Windows Customer Experience Improvement Program is disabled so information is not passed to the vendor.System Administrator

Fix: F-16061r1_fix

Configure the policy value for Computer Configuration -> Administrative Templates -> System -> Internet Communication Management -> Internet Communication Settings -> “Turn off Windows Customer Experience Improvement Program” to “Enabled”.

c

Disallow AutoPlay/Autorun from Autorun.inf

RMF Control: CM-7
Severity: High
CCI: CCI-001764
Version: 2.022
Vuln IDs: V-17900
Rule IDs: SV-29585r1_rule

This registry key will prevent the autorun.inf from executing commands.System Administrator

Fix: F-18240r1_fix

Add the registry value as specified in the manual check.

c

Unapproved Users have access to Debug programs.

RMF Control: AC-6
Severity: High
CCI: CCI-002235
Version: 4.005
Vuln IDs: V-18010
Rule IDs: SV-29589r1_rule

This is a Category 1 finding as it provides access to the kernel with complete access to sensitive and critical operating system components.trueSystem AdministratorInformation Assurance Officer

Fix: F-18585r1_fix

Configure the system to remove any accounts from the "Debug programs" user right.

c

Standard user accounts must only have Read permissions to the Winlogon registry key.

RMF Control: AC-6
Severity: High
CCI: CCI-002235
Version: 2.023
Vuln IDs: V-26070
Rule IDs: SV-33308r3_rule

Permissions on the Winlogon registry key must only allow privileged accounts to change registry values. If standard users have this capability there is a potential for programs to run with elevated privileges when a privileged user logs on to the system. System Administrator

Fix: F-80417r1_fix

Maintain permissions at least as restrictive as the defaults listed below for the "WinLogon" registry key. It is recommended to not change the permissions from the defaults. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\ The following are the same for each permission listed: Type - Allow Inherited from - MACHINE\SOFTWARE Columns: Name - Permission - Apply to Users - Read - This key and subkeys Administrators - Full Control - This key and subkeys SYSTEM - Full Control - This key and subkeys CREATOR OWNER - Special - Subkeys only (Special = Full Control)

a

The Windows dialog box title for the legal banner must be configured.

RMF Control: AC-8
Severity: Low
CCI: CCI-000048
Version: 3.014
Vuln IDs: V-26359
Rule IDs: SV-34591r2_rule

Failure to display the logon banner prior to a logon attempt will negate legal proceedings resulting from unauthorized access to system resources.System Administrator

Fix: F-36225r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options “Interactive Logon: Message title for users attempting to log on” to “DoD Notice and Consent Banner”, “US Department of Defense Warning Statement”, or a site defined equivalent. If a site defined title is used, it can in no case contravene or modify the language of the banner text required in V-1089.

b

The Deny log on as a batch job user right on member servers must be configured to prevent access from highly privileged domain accounts on domain systems and unauthenticated access on all systems.

RMF Control: AC-3
Severity: Medium
CCI: CCI-000213
Version: WINUR-000018-MS
Vuln IDs: V-26483
Rule IDs: SV-47113r1_rule

Inappropriate granting of user rights can provide system, administrative, and other high level capabilities. The "Deny log on as a batch job" right defines accounts that are prevented from logging on to the system as a batch job, such as Task Scheduler. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower trust systems helps mitigate the risk of privilege escalation from credential theft attacks which could lead to the compromise of an entire domain. The Guests group must be assigned to prevent unauthenticated access.System Administrator

Fix: F-41029r3_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Deny log on as a batch job" to include the following. Domain Systems Only: Enterprise Admins Group Domain Admins Group All Systems: Guests Group

b

The Deny log on as a service user right on member servers must be configured to prevent access from highly privileged domain accounts on domain systems. No other groups or accounts must be assigned this right.

RMF Control: AC-3
Severity: Medium
CCI: CCI-000213
Version: WINUR-000019-MS
Vuln IDs: V-26484
Rule IDs: SV-47123r1_rule

Inappropriate granting of user rights can provide system, administrative, and other high level capabilities. The "Deny log on as a service" right defines accounts that are denied log on as a service. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower trust systems helps mitigate the risk of privilege escalation from credential theft attacks which could lead to the compromise of an entire domain. Incorrect configurations could prevent services from starting and result in a DoS.System Administrator

Fix: F-41041r3_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Deny log on as a service" to include the following for domain joined systems. Enterprise Admins Group Domain Admins Group Configure the "Deny log on as a service" for non-domain systems to include no entries (blank).

b

The Deny log on locally user right on member servers must be configured to prevent access from highly privileged domain accounts on domain systems and unauthenticated access on all systems.

RMF Control: AC-3
Severity: Medium
CCI: CCI-000213
Version: WINUR-000020-MS
Vuln IDs: V-26485
Rule IDs: SV-47106r1_rule

Inappropriate granting of user rights can provide system, administrative, and other high level capabilities. The "Deny log on locally" right defines accounts that are prevented from logging on interactively. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower trust systems helps mitigate the risk of privilege escalation from credential theft attacks which could lead to the compromise of an entire domain. The Guests group must be assigned this right to prevent unauthenticated access.System Administrator

Fix: F-41033r3_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Deny log on locally" to include the following. Domain Systems Only: Enterprise Admins Group Domain Admins Group All Systems: Guests Group

b

The Deny log on through Terminal Services user right on member servers must be configured to prevent access from highly privileged domain accounts and local administrator accounts on domain systems and unauthenticated access on all systems.

RMF Control: AC-3
Severity: Medium
CCI: CCI-000213
Version: WINUR-000021-MS
Vuln IDs: V-26486
Rule IDs: SV-47142r3_rule

Inappropriate granting of user rights can provide system, administrative, and other high level capabilities. The "Deny log on through Terminal Services" right defines the accounts that are prevented from logging on using Terminal Services. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower trust systems helps mitigate the risk of privilege escalation from credential theft attacks which could lead to the compromise of an entire domain. Local administrator accounts on domain-joined systems must also be assigned this right to decrease the risk of lateral movement resulting from credential theft attacks. The Guests group must be assigned this right to prevent unauthenticated access.System Administrator

Fix: F-62413r2_fix

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment -> "Deny log on through Terminal Services" to include the following. Domain Systems Only: Enterprise Admins group Domain Admins group *All Local Administrator Accounts using the "DenyNetworkAccess" or "DeniedNetworkAccess" group (see V-45589). Do not use the built-in Administrators group. This group must contain the appropriate accounts/groups responsible for administering the system. All Systems: Guests group *Documentation and scripts supporting the use of this group to restrict local administrative accounts were changed at one point. The original name, "DeniedNetworkAccess", was changed to "DenyNetworkAccess". Automated benchmarks will look for either of these groups. Use of other methods will require manual validation.

b

The Fax service must be disabled if installed.

RMF Control: CM-7
Severity: Medium
CCI: CCI-000381
Version: WINSV-000100
Vuln IDs: V-26600
Rule IDs: SV-83307r1_rule