Microsoft Office 365 ProPlus STIG SCAP Benchmark

This policy setting allows you to block macros from running in Office files that come from the Internet. If you enable this policy setting, macros are blocked from running, even if “Enable all macros” is selected in the Macro Settings section of the Trust Center. Also, instead of having the choice to “Enable Content”, users will receive a notification that macros are blocked from running. If the Office file is saved to a trusted location or was previously trusted by the user, macros will be allowed to run. If you disable or do not configure this policy setting, the settings configured in the Macro Settings section of the Trust Center determine whether macros run in Office files that come from the Internet.

This policy setting controls whether the specified Office application notifies users when unsigned application add-ins are loaded or silently disable such add-ins without notification. This policy setting only applies if the "Require that application add-ins are signed by Trusted Publisher" policy setting is enabled, which prevents users from changing this policy setting. If users enable this policy setting, applications automatically disable unsigned add-ins without informing users. If this policy setting is disabled, if this application is configured to require that all add-ins be signed by a trusted publisher, any unsigned add-ins the application loads will be disabled and the application will display the Trust Bar at the top of the active window. The Trust Bar contains a message that informs users about the unsigned add-in. If users do not configure this policy setting, the disable behavior applies, and in addition, users can configure this requirement themselves in the "Add-ins" category of the Trust Center for the application.

This policy setting controls how the specified applications warn users when Visual Basic for Applications (VBA) macros are present. If this policy setting is enabled, choose from four options for determining how the specified applications will warn the user about macros: - Disable all with notification: The application displays the Trust Bar for all macros, whether signed or unsigned. This option enforces the default configuration in Office. This option also allows users to potentially enable unsigned/untrusted macros. If a site requires the use of macros, they must be signed/approved and added to appropriate locations listed in the Trust Center Settings. - Disable all except digitally signed macros: The application displays the Trust Bar for digitally signed macros, allowing users to enable them or leave them disabled. Any unsigned macros are disabled, and users are not notified. - Disable all without notification: The application disables all macros, whether signed or unsigned, and does not notify users. - Enable all macros (not recommended): All macros are enabled, whether signed or unsigned. This option can significantly reduce security by allowing dangerous code to run undetected. If this policy setting is disabled, "Disable all with notification" will be the default setting. If this policy setting is not configured, when users open files in the specified applications that contain VBA macros, the applications open the files with the macros disabled and display the Trust Bar with a warning that macros are present and have been disabled. Users can inspect and edit the files if appropriate, but cannot use any disabled functionality until they enable it by clicking "Enable Content" on the Trust Bar. If the user clicks "Enable Content", then the document is added as a trusted document. Important: If "Disable all except digitally signed macros" is selected, users will not be able to open unsigned Access databases.

This policy setting controls whether trusted locations on the network can be used. If you enable this policy setting, users can specify trusted locations on network shares or in other remote locations that are not under their direct control by selecting the "Allow Trusted Locations on my network (not recommended)" check box in the Trusted Locations section of the Trust Center. Content, code, and add-ins are allowed to load from trusted locations with minimal security and without prompting the user for permission. If you disable or do not configure this policy setting, the selected application ignores any network locations listed in the Trusted Locations section of the Trust Center. Disabling this policy setting does not delete any network locations from the Trusted Locations list. Instead, it forces the selected application to treat the locations as non-trusted and prevents users from adding new network locations to the list. If you also deploy Trusted Locations via Group Policy, you should verify whether any of them are remote locations. If any of them are remote locations and you do not allow remote locations via this policy setting, those policy keys that point to remote locations will be ignored on client computers. Disabling this policy setting will cause disruption for users who add network locations to the Trusted Locations list. However, it is not recommended to enable this policy setting (as the "Allow Trusted Locations on my network (not recommended)" check box itself states), so in practice it should be possible to disable this policy setting in most situations without causing significant usability issues for most users.

This policy setting specifies for which documents the VBA Runtime Scan feature is enabled. If the feature is disabled for all documents, no runtime scanning of enabled macros will be performed. If the feature is enabled for low trust documents, the feature will be enabled for all documents for which macros are enabled except: - Documents opened while macro security settings are set to "Enable All Macros" - Documents opened from a Trusted Location - Documents that are Trusted Documents - Documents that contain VBA that is digitally signed by a Trusted Publisher If the feature is enabled for all documents, then the above class of documents are not excluded from the behavior. This protocol allows the VBA runtime to report to the Anti-Virus system certain high-risk code behaviors it is about to execute and allows the Anti-Virus to report back to the process if the sequence of observed behaviors indicates likely malicious activity so the Office application can take appropriate action. When this feature is enabled, affected VBA projects' runtime performance may be reduced.

This policy setting determines whether metadata is encrypted in Office Open XML files that are protected by Information Rights Management (IRM). If you enable this policy setting, Excel, PowerPoint, and Word encrypt metadata stored in rights-managed Office Open XML files and override any configuration changes on users' computers. If you disable this policy setting, Office 2016 applications cannot encrypt metadata in rights-managed Office Open XML files, which can reduce security. If you do not configure this policy setting, when Information Rights Management (IRM) is used to restrict access to an Office Open XML document, any metadata associated with the document is not encrypted.

This policy setting controls whether Office 365 ProPlus applications can poll Office servers to retrieve lists of published links. If this policy setting is enabled, Office 365 ProPlus applications cannot poll an Office server for published links. If this policy setting is disabled or not configured, users of Office 365 ProPlus applications can see and use links to Microsoft SharePoint Server sites from those applications. Published links can be configured to Office applications during initial deployment, and can add or change links as part of regular operations. These links appear on the My SharePoint Sites tab of the Open, Save, and Save As dialog boxes when opening and saving documents from these applications. Links can be targeted so they only appear to users who are members of particular audiences. Note: This policy setting applies to Microsoft SharePoint Server specifically. It does not apply to Microsoft SharePoint Foundation.

This policy setting controls whether Office 365 ProPlus applications load any custom user interface (UI) code included with a document or template. Office 365 ProPlus allows developers to extend the UI with customization code that is included in a document or template. If this policy setting is enabled, Office 365 ProPlus applications cannot load any UI customization code included with documents and templates. If this policy setting is not configured or disabled, Office 365 ProPlus applications load any UI customization code included with a document or template when opening it.

This policy setting specifies the Microsoft ActiveX initialization security level for all Microsoft Office applications. ActiveX controls can adversely affect a computer directly. In addition, malicious code can be used to compromise an ActiveX control and attack a computer. To indicate the safety of an ActiveX control, developers can denote them as Safe for Initialization (SFI). SFI indicates that a control is safe to open and run, and that it is not capable of causing a problem for any computer, regardless of whether it has persisted data values or not. If a control is not marked SFI, it is possible that the control could adversely affect a computer--or it could mean that the developers did not test the control in all situations and are not sure whether it might be compromised in the future. If you enable this policy setting, you can set the ActiveX security level to a number between 1 and 6. These security levels are as follows: 1. Regardless of how the control is marked, load it and use the persisted values (if any). This setting does not prompt the user. 2. If SFI, load the control in safe mode and use persisted values (if any). If not SFI, load in unsafe mode with persisted values (if any), or use the default (first-time initialization) settings. This level is similar to the default configuration, but does not prompt the user. 3. If SFI, load the control in unsafe mode and use persisted values (if any). If not SFI, prompt the user and advise them that it is marked unsafe. If the user chooses No at the prompt, do not load the control. Otherwise, load it with default (first-time initialization) settings. 4. If SFI, load the control in safe mode and use persisted values (if any). If not SFI, prompt the user and advise them that it is marked unsafe. If the user chooses No at the prompt, do not load the control. Otherwise, load it with default (first-time initialization) settings. 5. If SFI, load the control in unsafe mode and use persisted values (if any). If not SFI, prompt the user and advise them that it is marked unsafe. If the user chooses No at the prompt, do not load the control. Otherwise, load it with persisted values. 6. If SFI, load the control in safe mode and use persisted values (if any). If not SFI, prompt the user and advise them that it is marked unsafe. If the user chooses No at the prompt, do not load the control. Otherwise, load it with persisted values. If you disable or do not configure this policy setting, if a control is marked SFI, the application loads the control in safe mode and uses persisted values (if any). If the control is not marked SFI, the application loads the control in unsafe mode with persisted values (if any), or uses the default (first-time initialization) settings. In both situations, the Message Bar informs users that the controls have been disabled and prompts them to respond. Important: Some ActiveX controls do not respect the safe mode registry setting, and therefore might load persisted data even though you configure this setting to instruct the control to use safe mode. This setting only increases security for ActiveX controls that are accurately marked as SFI. In situations that involve malicious or poorly designed code, an ActiveX control might be inaccurately marked as SFI.

This policy setting controls whether macros can run in an Office 365 ProPlus application that is opened programmatically by another application. If this policy setting is enabled, the user can choose from three options for controlling macro behavior in Excel, PowerPoint, and Word when the application is opened programmatically: - Disable macros by default ¬- all macros are disabled in the programmatically opened application. - Macros enabled (default) - macros can run in the programmatically opened application. This option enforces the default configuration in Excel, PowerPoint, and Word. - User application macro security level - macro functionality is determined by the setting in the "Macro Settings" section of the Trust Center. If this policy setting is disabled or not configured, when a separate program is used to launch Microsoft Excel, PowerPoint, or Word programmatically, any macros can run in the programmatically opened application without being blocked.

This policy setting controls whether Office 365 ProPlus applications notify users when potentially unsafe features or content are detected, or whether such features or content are silently disabled without notification. The Message Bar in Office 365 ProPlus applications is used to identify security issues, such as unsigned macros or potentially unsafe add-ins. When such issues are detected, the application disables the unsafe feature or content and displays the Message Bar at the top of the active window. The Message Bar informs the users about the nature of the security issue and, in some cases, provides the users with an option to enable the potentially unsafe feature or content, which could harm the user's computer. If this policy setting is enabled, Office 365 ProPlus applications do not display information in the Message Bar about potentially unsafe content that has been detected or has automatically been blocked.

This policy setting enables you to specify an encryption type for password-protected Office 97-2003 files. If you enable this policy setting, you can specify the type of encryption that Office applications will use to encrypt password-protected files in the older Office 97-2003 file formats. The chosen encryption type must have a corresponding cryptographic service provider (CSP) installed on the computer that encrypts the file. See the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography\Defaults\Provider\ registry key for a list of CSPs installed on the local computer. Specify the encryption type to use by entering it in the provided text box in the following form: ,,. For example, Microsoft Enhanced Cryptographic Provider v1.0,RC4,128 If you do not configure this policy setting, Excel, PowerPoint, and Word use Office 97/2000 Compatible encryption, a proprietary encryption method, to encrypt password-protected Office 97-2003 files.

This policy setting allows you to specify an encryption type for Office Open XML files. If you enable this policy setting, you can specify the type of encryption that Office applications use to encrypt password-protected files in the Office Open XML file formats used by Excel, PowerPoint, and Word. The chosen encryption type must have a corresponding cryptographic service provider (CSP) installed on the computer that encrypts the file. See the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography\Defaults\Provider\ registry key for a list of CSPs installed on the local computer. Specify the encryption type to use by entering it in the provided text box in the following form: ,, For example: Microsoft Enhanced Cryptographic Provider v1.0,RC4,128 If you disable or do not configure this policy setting, the default CSP is used. The default cryptographic service provider (CSP) is Microsoft Enhanced RSA and AES Cryptographic Provider, AES-128, 128-bit. Note: This policy setting does not take effect unless the registry key HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\\Security\Crypto\CompatMode is set to 0. By default the CompatMode registry key is set to 1.

This policy setting controls whether trusted locations can be defined by users, the Office Customization Tool (OCT), and Group Policy, or if they must be defined by Group Policy alone. If you enable this policy setting, users can specify any location as a trusted location, and a computer can have a combination of user-created, OCT-created, and Group Policy-created trusted locations. If you disable this policy setting, all trusted locations that are not created by Group Policy are disabled and users cannot create new trusted locations in the Trust Center. If you do not configure this policy setting, the behavior is the equivalent of setting the policy to Enabled. Note: InfoPath and Outlook do not recognize trusted locations, and therefore are unaffected by this policy setting.

This policy setting controls whether Office 365 ProPlus applications can load an XML expansion pack manifest file with a Smart Document.

This policy setting allows the user to control how ActiveX controls in UserForms should be initialized based upon whether they are Safe for Initialization (SFI) or Unsafe for Initialization (UFI). ActiveX controls are Component Object Model (COM) objects and have unrestricted access to users' computers. ActiveX controls can access the local file system and change the registry settings of the operating system. If a malicious user repurposes an ActiveX control to take over a user's computer, the effect could be significant. To help improve security, ActiveX developers can mark controls as SFI, which means that the developer states that the controls are safe to open and run and not capable of causing harm to any computers. If a control is not marked SFI, the control could adversely affect a computer, or the developers may not have tested the control in all situations and are not sure whether their control might be compromised at some future date. SFI controls run in safe mode, which limits their access to the computer. For example, a worksheet control can both read and write files when it is in unsafe mode, but perhaps only read from files when it is in safe mode. This functionality allows the control to be used in very powerful ways when safety was not important, but the control would still be safe for use in a Web page. If a control is not marked as SFI, it is marked UFI, which means that it is capable of affecting a user's computer. If UFI ActiveX controls are loaded, they are always loaded in unsafe mode. If this policy setting is enabled, choose from four options for loading controls in UserForms: 1. For a UFI or SFI signed control that supports safe and unsafe mode, load the control in unsafe mode. For an SFI signed control that only supports a safe mode configuration, load the control in safe mode. This option enforces the default configuration. 2. Users are prompted to determine how UserForm forms will load. The prompt only displays once per session within an application. When users respond to the prompt, loading continues based on whether the control is UFI or SFI: - For a UFI signed control, if users respond "Yes" to the prompt, load the control in unsafe mode. If users respond "No", load the control using the default properties. - For an SFI signed control that supports both safe and unsafe modes, if users respond "Yes" to the prompt, load the control in unsafe mode. If users respond "No", load the control using safe mode. If the SFI control can only support safe mode, load the control in safe mode. This option is the default configuration in the Microsoft Office 365 ProPlus release. 3. Users are prompted to determine how UserForm forms will load. The prompt only displays once per session within an application. When users respond to the prompt, loading continues based on whether the control is UFI or SFI: - For a UFI signed control, if users respond "Yes" to the prompt, load the control in unsafe mode. If users respond "No", load the control with its default properties. - For an SFI signed control, load in safe mode. 4. For a UFI signed control, load with the default properties of the control. For an SFI signed control, load in safe mode (considered to be the safest mode). If this policy setting is disabled or not configured, the behavior is as if this policy setting is enabled and then select option "1".

Internet Explorer add-ons are pieces of code, run in Internet Explorer, to provide additional functionality. Rogue add-ons may contain viruses or other malicious code. Disabling or not configuring this setting could allow malicious code or users to become active on user computers or the network. For example, a malicious user can monitor and then use keystrokes that user's type into Internet Explorer. Even legitimate add-ons may demand resources, compromising the performance of Internet Explorer and the operating systems for user computers.

Encryption is only as good as the encryption modules utilized. Unapproved cryptographic module algorithms cannot be verified and cannot be relied on to provide confidentiality or integrity, and DoD data may be compromised due to weak algorithms. The use of TLS provides confidentiality of data in transit between the application server and client. FIPS 140-2 approved TLS versions include TLS V1.0 or greater. TLS must be enabled and non-FIPS-approved SSL versions must be disabled. NIST SP 800-52 specifies the preferred configurations for government systems.

The Uniform Resource Locator (URL) standard allows user authentication to be included in URL strings in the form http://username:password@example.com. A malicious user might use this URL syntax to create a hyperlink that appears to open a legitimate website but actually opens a deceptive (spoofed) website. For example, the URL http://www.wingtiptoys.com@example.com appears to open http://www.wingtiptoys.com but actually opens http://example.com. To protect users from such attacks, Internet Explorer usually blocks any URLs using this syntax.

This policy setting controls whether Office 365 ProPlus applications notify users when potentially unsafe features or content are detected, or whether such features or content are silently disabled without notification. The Message Bar in Office 2016 applications is used to identify security issues, such as unsigned macros or potentially unsafe add-ins. When such issues are detected, the application disables the unsafe feature or content and displays the Message Bar at the top of the active window. The Message Bar informs the users about the nature of the security issue and, in some cases, provides the users with an option to enable the potentially unsafe feature or content, which could harm the user's computer. If you enable this policy setting, Office 365 ProPlus applications do not display information in the Message Bar about potentially unsafe content that has been detected or has automatically been blocked. If you disable this policy setting, Office 365 ProPlus applications display information in the Message Bar about content that has automatically been blocked. If you do not configure this policy setting, if an Office 365 ProPlus application detects a security issue, the Message Bar is displayed. However, this configuration can be modified by users in the Trust Center.

Internet Explorer places restrictions on each web page users can use the browser to open. Web pages on a user's local computer have the fewest security restrictions and reside in the Local Machine zone, making this security zone a prime target for malicious users and code. Disabling or not configuring this setting could allow pages in the Internet zone to navigate to pages in the Local Machine zone to then run code to elevate privileges. This could allow malicious code or users to become active on user computers or the network.

Encryption is only as good as the encryption modules utilized. Unapproved cryptographic module algorithms cannot be verified and cannot be relied upon to provide confidentiality or integrity, and DoD data may be compromised due to weak algorithms. The use of TLS provides confidentiality of data in transit between the application server and client. FIPS 140-2 approved TLS versions include TLS V1.0 or greater. TLS must be enabled and non-FIPS-approved SSL versions must be disabled. NIST SP 800-52 specifies the preferred configurations for government systems.

To protect users from attacks, Internet Explorer usually does not attempt to load malformed URLs. This functionality can be controlled separately for instances of Internet Explorer spawned by Office applications (for example, if a user clicks a link in an Office document or selects a menu option that loads a web page). If Internet Explorer attempts to load a malformed URL, a security risk could occur.

Encryption is only as good as the encryption modules utilized. Unapproved cryptographic module algorithms cannot be verified and cannot be relied upon to provide confidentiality or integrity, and DoD data may be compromised due to weak algorithms. The use of TLS provides confidentiality of data in transit between the application server and client. FIPS 140-2 approved TLS versions include TLS V1.0 or greater. TLS must be enabled and non-FIPS-approved SSL versions must be disabled. NIST SP 800-52 specifies the preferred configurations for government systems.

Internet Explorer places restrictions on each web page users can use the browser to open. Web pages on a user's local computer have the fewest security restrictions and reside in the Local Machine zone, making this security zone a prime target for malicious users and code. Disabling or not configuring this setting could allow pages in the Internet zone to navigate to pages in the Local Machine zone to then run code to elevate privileges. This could allow malicious code or users to become active on user computers or the network.

Microsoft ActiveX controls allow unmanaged, unprotected code to run on the user computers. ActiveX controls do not run within a protected container in the browser like the other types of HTML or Microsoft Silverlight-based controls. Disabling or not configuring this setting does not block prompts for ActiveX control installations, and these prompts display to users. This could allow malicious code to become active on user computers or the network.

Disabling this setting allows websites to present file download prompts via code without the user specifically initiating the download. User preferences may also allow the download to occur without prompting or interaction with the user. Even if Internet Explorer prompts the user to accept the download, some websites abuse this functionality. Malicious websites may continually prompt users to download a file or present confusing dialog boxes to trick users into downloading or running a file. If the download occurs and it contains malicious code, the code could become active on user computers or the network.

Typically, when Internet Explorer loads a web page from a Universal Naming Convention (UNC) share that contains a Mark of the Web (MOTW) comment, indicating the page was saved from a site on the Internet, Internet Explorer runs the page in the Internet security zone instead of the less restrictive Local Intranet security zone. This functionality can be controlled separately for instances of Internet Explorer spawned by Office applications (for example, if a user clicks a link in an Office document or selects a menu option that loads a web page). If Internet Explorer does not evaluate the page for a MOTW, potentially dangerous code could be allowed to run.

Malicious websites often try to confuse or trick users into giving a site permission to perform an action allowing the site to take control of the users' computers in some manner. Disabling or not configuring this setting allows unknown websites to: - Create browser windows appearing to be from the local operating system. - Draw active windows displaying outside of the viewable areas of the screen capturing keyboard input. - Overlay parent windows with their own browser windows to hide important system information, choices, or prompts.

This policy setting controls whether the Adobe Flash control can be activated by Office documents. Note that activation blocking applies only within Office processes. If you enable this policy setting, you can choose from three options to control whether and how Flash is blocked from activation: 1. "Block all activation" prevents the Flash control from being loaded, whether directly referenced by the document or indirectly by another embedded object. 2. "Block embedding/linking, allow other activation" prevents the Flash control from being loaded when directly referenced by the document, but does not prevent activation through another object. 3. "Allow all activation" restores Office's default behavior, allowing the Flash control to be activated. Because this setting is not a true Group Policy setting and "tattoos" the registry, enabling the "Allow all activation" option is the only way to restore default behavior after either of the "Block" options has been applied. It is not recommended to configure this setting to "Disabled" or "Not Configured" after it has been enabled.

This policy setting controls whether trusted locations on the network can be used. If you enable this policy setting, users can specify trusted locations on network shares or in other remote locations that are not under their direct control by selecting the "Allow Trusted Locations on my network (not recommended)" check box in the Trusted Locations section of the Trust Center. Content, code, and add-ins are allowed to load from trusted locations with minimal security and without prompting the user for permission. If you disable or do not configure this policy setting, the selected application ignores any network locations listed in the Trusted Locations section of the Trust Center. Disabling this policy setting does not delete any network locations from the Trusted Locations list. Instead, it forces the selected application to treat the locations as non-trusted and prevents users from adding new network locations to the list. If you also deploy Trusted Locations via Group Policy, you should verify whether any of them are remote locations. If any of them are remote locations and you do not allow remote locations via this policy setting, those policy keys that point to remote locations will be ignored on client computers. Disabling this policy setting will cause disruption for users who add network locations to the Trusted Locations list. However, it is not recommended to enable this policy setting (as the "Allow Trusted Locations on my network (not recommended)" check box itself states), so in practice it should be possible to disable this policy setting in most situations without causing significant usability issues for most users.

This policy setting controls how the specified applications warn users when Visual Basic for Applications (VBA) macros are present. If you enable this policy setting, you can choose from four options for determining how the specified applications will warn the user about macros: - Disable all with notification: The application displays the Trust Bar for all macros, whether signed or unsigned. This option enforces the default configuration in Office. This option also allows users to potentially enable unsigned/untrusted macros. If a site requires the use of macros, they must be signed /approved and added to appropriate locations listed in the Trust Center Settings. - Disable all except digitally signed macros: The application displays the Trust Bar for digitally signed macros, allowing users to enable them or leave them disabled. Any unsigned macros are disabled, and users are not notified. - Disable all without notification: The application disables all macros, whether signed or unsigned, and does not notify users. - Enable all macros (not recommended): All macros are enabled, whether signed or unsigned. This option can significantly reduce security by allowing dangerous code to run undetected.

This policy setting allows you to control whether Dynamic Data Exchange (DDE) server launch is allowed. By default, DDE server launch is turned off, but users can turn on DDE server launch by going to File >> Options >> Trust Center >> Trust Center Settings >> External Content. For security reasons, turning on DDE server launch is not recommended. Note: For DDE server launch to work, Dynamic Data Exchange (DDE) server lookup must be turned on. Be sure that the “Don't allow Dynamic Data Exchange (DDE) server lookup” policy setting is not enabled, because enabling that policy setting turns off DDE server lookup. If you enable this policy setting, DDE server launch is not allowed, and users cannot turn on DDE server launch in the Trust Center. If you disable this policy setting, DDE server launch is allowed, and users cannot turn off DDE server launch in the Trust Center. For security reasons, this is not recommended. If you do not configure this policy setting, DDE server launch is turned off, but users can turn on DDE server launch in the Trust Center. Note: This policy setting only applies to subscription versions of Office, such as Office 365 ProPlus.

This policy setting allows you to control whether Dynamic Data Exchange (DDE) server lookup is allowed. By default, DDE server lookup is turned on, but users can turn off DDE server lookup by going to File >> Options >> Trust Center >> Trust Center Settings >> External Content. If you enable this policy setting, DDE server lookup is not allowed, and users cannot turn on DDE server lookup in the Trust Center. Note: If you are using Dynamic Data Exchange (DDE) server launch, which is not recommended, do not enable this policy setting, because DDE server launch requires DDE server lookup to be on. If you disable or do not configure this policy setting, DDE server lookup is turned on, but users can turn off DDE server lookup in the Trust Center. Note: This policy setting only applies to subscription versions of Office, such as Office 365 ProPlus.

This policy setting allows you to determine whether users can open, view, edit, or save Excel files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to determine whether users can open, view, edit, or save Excel files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to determine whether users can open, view, edit, or save Excel files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to determine whether users can open, view, edit, or save Excel files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to determine whether users can open, view, edit, or save Excel files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to determine whether users can open, view, edit, or save Excel files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to determine whether users can open, view, edit, or save Excel files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to determine whether users can open, view, edit, or save Excel files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to determine whether users can open, view, edit, or save Excel files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to determine whether users can open, view, edit, or save Excel files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to determine whether users can open, view, edit, or save Excel files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to determine whether users can open, view, edit, or save Excel files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to determine whether users can open, view, edit, or save Excel files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting controls whether Excel presents users with a list of data extraction options before beginning an Open and Repair operation when users choose to open a corrupt workbook in repair or extract mode. If you enable this policy setting, Excel opens the file using the Safe Load process and does not prompt users to choose between repairing or extracting data. If you disable or do not configure this policy setting, Excel prompts the user to select either to repair or to extract data, and to select either to convert to values or to recover formulas.

This policy setting controls whether Excel prompts users to update automatic links, or whether the updates occur in the background with no prompt. If you enable or do not configure this policy setting, Excel will prompt users to update automatic links. In addition, the "Ask to update automatic links" user interface option under File tab >> Advanced >> General is selected. If you disable this policy setting, Excel updates automatic links without prompting or informing users, which could compromise the integrity of some of the information in the workbook.

This policy setting controls whether Excel loads graphics when opening Web pages that were not created in Excel. It configures the "Load pictures from Web pages not created in Excel" option under the File tab >> Options >> Advanced >> General >> Web Options... >> General tab. If you enable or do not configure this policy setting, Excel loads any graphics that are included in the pages, regardless of whether they were originally created in Excel. If you disable this policy setting, Excel will not load any pictures from Web pages that were not created in Excel.

This policy setting allows administrators to disable the AutoRepublish feature in Excel. If users choose to publish Excel data to a static Web page and enable the AutoRepublish feature, Excel saves a copy of the data to the Web page every time the user saves the workbook. By default, a message dialog displays every time the user saves a published workbook when AutoRepublish is enabled. From this dialog, the user can disable AutoRepublish temporarily or permanently, or select "Do not show this message again" to prevent the dialog from appearing after every save. If the user selects "Do not show this message again", Excel will continue to automatically republish the data after every save without informing the user. If you enable this policy setting, the AutoRepublish feature is turned off and Excel users will need to publish data to the Web manually. If you disable or do not configure this policy setting, users can enable the AutoRepublish feature to automatically republish workbooks saved as type Web Page.

This policy setting allows administrators to disable the AutoRepublish feature in Excel. If users choose to publish Excel data to a static Web page and enable the AutoRepublish feature, Excel saves a copy of the data to the Web page every time the user saves the workbook. By default, a message dialog displays every time the user saves a published workbook when AutoRepublish is enabled. From this dialog, the user can disable AutoRepublish temporarily or permanently, or select "Do not show this message again" to prevent the dialog from appearing after every save. If the user selects "Do not show this message again", Excel will continue to automatically republish the data after every save without informing the user. If you enable this policy setting, the AutoRepublish feature is turned off and Excel users will need to publish data to the Web manually. If you disable or do not configure this policy setting, users can enable the AutoRepublish feature to automatically republish workbooks saved as type Web Page.

This policy setting controls how Excel loads file types that do not match their extension. Excel can load files with extensions that do not match the files' type. For example, if a comma-separated values (CSV) file named example.csv is renamed example.xls (or any other file extension supported by Excel 2003 and earlier only), Excel can properly load it as a CSV file. If you enable this policy setting, you can choose from three options for working with files that have non-matching extensions: - Allow different - Excel opens the files properly without warning users that the files have non-matching extensions. If users subsequently edit and save the files, Excel preserves both the true, underlying file format and the incorrect file extension. - Allow different, but warn - Excel opens the files properly, but warns users about the file type mismatch. This option is the default configuration in Excel. - Always match file type - Excel does not open any files that have non-matching extensions. If this policy setting is disabled or not configured or if users attempt to open files with the wrong extension, Excel opens the file and displays a warning that the file type is not what Excel expected.

This policy setting controls whether encrypted macros in Open XML workbooks be are required to be scanned with anti-virus software before being opened. If you enable this policy setting, you may choose one of these options: - Scan encrypted macros: encrypted macros are disabled unless anti-virus software is installed. Encrypted macros are scanned by your anti-virus software when you attempt to open an encrypted workbook that contains macros. - Scan if anti-virus software available: if anti-virus software is installed, scan the encrypted macros first before allowing them to load. If anti-virus software is not available, allow encrypted macros to load. - Load macros without scanning: do not check for anti-virus software and allow macros to be loaded in an encrypted file. If you disable or do not configure this policy setting, the behavior will be similar to the "Scan encrypted macros" option.

This policy setting allows you turn off the file validation feature. If you enable this policy setting, file validation will be turned off. If you disable or do not configure this policy setting, file validation will be turned on. Office Binary Documents (97-2003) are checked to see if they conform against the file format schema before they are opened.

This policy setting controls how Excel will warn users when WEBSERVICE functions are present. If you enable this policy setting, you can choose from three options for determining how the specified applications will warn the user about WEBSERVICE functions: - Disable all with notification: The application displays the Trust Bar for all WEBSERVICE functions. This option enforces the default configuration in Office. - Disable all without notification: The application disables all WEBSERVICE functions and does not notify users. - Enable all WEBSERVICE functions (not recommended): The application enables all WEBSERVICE functions and does not notify users. This option can significantly reduce security by allowing information disclosure to third-party web services. If you disable this policy setting, the “Disable all with notification” will be the default setting. If you do not configure this policy setting, when users open workbooks that contain WEBSERVICE functions, Excel will open the files with the WEBSERVICE functions disabled and display the Trust Bar with a warning that WEBSERVICE functions are present and have been disabled. Users can inspect and edit the files if appropriate, but cannot use any disabled functionality until they enable it by clicking "Enable Content" on the Trust Bar. If the user clicks "Enable Content," then the document is added as a trusted document.

This policy setting allows you to block macros from running in Office files that come from the Internet. If you enable this policy setting, macros are blocked from running, even if “Enable all macros” is selected in the Macro Settings section of the Trust Center. Also, instead of having the choice to “Enable Content”, users will receive a notification that macros are blocked from running. If the Office file is saved to a trusted location or was previously trusted by the user, macros will be allowed to run. If you disable or do not configure this policy setting, the settings configured in the Macro Settings section of the Trust Center determine whether macros run in Office files that come from the Internet.

This policy setting controls whether the specified Office 2016 applications notify users when unsigned application add-ins are loaded or silently disable such add-ins without notification. This policy setting only applies if the ''Require that application add-ins are signed by Trusted Publisher'' policy setting is enabled, which prevents users from changing this policy setting. If this policy setting is enabled, applications automatically disable unsigned add-ins without informing users. If this policy setting is disabled, if an application is configured to require that all add-ins be signed by a trusted publisher, any unsigned add-ins the application loads will be disabled and the application will display the Trust Bar at the top of the active window. The Trust Bar contains a message that informs users about the unsigned add-in. If this policy setting is not configured, the disable behavior applies, and in addition, users can configure this requirement themselves in the ''Add-ins'' category of the Trust Center for the application.

This policy setting controls whether Microsoft Query files (.iqy, oqy, .dqy, and .rqy) in an untrusted location are prevented from opening. If you enable this policy setting, Microsoft Query files in an untrusted location are prevented from opening. Users will not be able to change this setting under File >> Options >> Trust Center >> Trust Center Settings >> External Content. If you disable or do not configure this policy setting, Microsoft Query files in an untrusted location are not prevented from opening, unless users have changed this setting in the Trust Center. Note: This policy setting only applies to subscription versions of Office, such as Office 365 ProPlus.

This policy setting controls whether database files (.dbf) opened from an untrusted location are always opened in Protected View. If you enable this policy setting, database files opened from an untrusted location are always opened in Protected View. Users will not be able to change this setting under File >> Options >> Trust Center >> Trust Center Settings >> Protected View. If you disable or do not configure this policy setting, database files opened from an untrusted location are not opened in Protected View, unless users have changed this setting in the Trust Center. Note: This policy setting only applies to subscription versions of Office, such as Office 365 ProPlus.

This policy setting allows you to determine if files downloaded from the Internet zone open in Protected View. If you enable this policy setting, files downloaded from the Internet zone do not open in Protected View. If you disable or do not configure this policy setting, files downloaded from the Internet zone open in Protected View.

This policy setting lets you determine if files located in unsafe locations will open in Protected View. If you have not specified unsafe locations, only the "Downloaded Program Files" and "Temporary Internet Files" folders are considered unsafe locations. If you enable this policy setting, files located in unsafe locations do not open in Protected View. If you disable or do not configure this policy setting, files located in unsafe locations open in Protected View.

This policy setting controls how Office handles documents when they fail file validation. If you enable this policy setting, you can configure the following options for files that fail file validation: - Block files completely. Users cannot open the files. - Open files in Protected View and disallow edit. Users cannot edit the files. This is also how Office handles the files if you disable this policy setting. - Open files in Protected View and allow edit. Users can edit the files. This is also how Office handles the files if you do not configure this policy setting. If you disable this policy setting, Office follows the "Open files in Protected View and disallow edit" behavior. If you do not configure this policy setting, Office follows the "Open files in Protected View and allow edit" behavior.

This policy setting allows you to determine if Excel files in Outlook attachments open in Protected View. If you enable this policy setting, Outlook attachments do not open in Protected View. If you disable or do not configure this policy setting, Outlook attachments open in Protected View.

When Lync connects to the server, it supports various authentication mechanisms. This policy allows the user to specify whether Digest and Basic authentication are supported. Disabled (default): NTLM/Kerberos/TLS-DSK/Digest/Basic Enabled: Authentication mechanisms: NTLM/Kerberos/TLS-DSK Gal Download: Requires HTTPS if user is not logged in as an internal user.

Prevents from HTTP being used for SIP connection in case TLS or TCP fail.

This policy setting controls which authentication method Outlook uses to authenticate with Microsoft Exchange Server. Note: Exchange Server supports the Kerberos authentication protocol and NTLM for authentication. The Kerberos protocol is the more secure authentication method and is supported on Windows 2000 Server and later versions. NTLM authentication is supported in pre-Windows 2000 environments. If you enable this policy setting, you can choose from three different options for controlling how Outlook authenticates with Microsoft Exchange Server: - Kerberos/NTLM password authentication. Outlook attempts to authenticate using the Kerberos authentication protocol. If this attempt fails, Outlook attempts to authenticate using NTLM. This option is the default configuration. - Kerberos password authentication. Outlook attempts to authenticate using the Kerberos protocol only. - NTLM password authentication. Outlook attempts to authenticate using NTLM only. If you disable or do not configure this policy setting, Outlook will attempt to authenticate using the Kerberos authentication protocol. If it cannot (because no Windows 2000 or later domain controllers are available), it will authenticate using NTLM.

This policy setting controls whether Outlook uses remote procedure call (RPC) encryption to communicate with Microsoft Exchange servers. If you enable this policy setting, Outlook uses RPC encryption when communicating with an Exchange server. Note: RPC encryption only encrypts the data from the Outlook client computer to the Exchange server. It does not encrypt the messages themselves as they traverse the Internet. If you disable or do not configure this policy setting, RPC encryption is still used by default. This setting allows you to override the corresponding per-profile setting.

This policy setting controls whether Outlook executes scripts that are associated with custom forms or folder home pages for public folders.

This policy setting controls whether Outlook executes scripts associated with custom forms or folder home pages for shared folders.

This policy setting controls whether e-mail messages dragged from Outlook to the file system are saved in Unicode or ANSI format.

By default, third-party ActiveX controls are not allowed to run in one-off forms in Outlook. You can change this behavior so that Safe Controls (Microsoft Forms 2.0 controls and the Outlook Recipient and Body controls) are allowed in one-off forms, or so that all ActiveX controls are allowed to run.

This policy setting prevents users from overriding the set of attachments blocked by Outlook. If you enable this policy setting users will be prevented from overriding the set of attachments blocked by Outlook. Outlook also checks the "Level1Remove" registry key when this setting is specified. If you disable or do not configure this policy setting, users will be allowed to override the set of attachments blocked by Outlook.

This policy setting controls whether pictures and external content in HTML e-mail messages from untrusted senders on the Internet are downloaded without Outlook users explicitly choosing to do so. If you enable this policy setting, Outlook will automatically download external content in all e-mail messages sent over the Internet and users will not be able to change the setting. If you disable or do not configure this policy setting, Outlook does not consider the Internet a safe zone, which means that Outlook will not automatically download content from external servers unless the sender is included in the Safe Senders list. Recipients can choose to download external content from untrusted senders on a message-by-message basis.

This policy setting controls whether Outlook users can publish e-mail certificates to the Global Address List (GAL). If you enable this policy setting, the "Publish to GAL" button does not display in the "E-mail Security" section of the Trust Center. If you disable or do not configure this policy setting, Outlook users can publish their e-mail certificates to the GAL through the "E-mail Security" section of the Trust Center.

This policy setting allows you to set the minimum key length for an encrypted e-mail message. If you enable this policy setting, you may set the minimum key length for an encrypted e-mail message. Outlook will display a warning dialog if the user tries to send a message using an encryption key that is below the minimum encryption key value set. The user can still choose to ignore the warning and send using the encryption key originally chosen. If you disable or do not configure this policy setting, a dialog warning will be shown to the user if the user attempts to send a message using encryption. The user can still choose to ignore the warning and send using the encryption key originally chosen.

This policy setting controls how Outlook warns users about messages with invalid digital signatures. If you enable this policy setting, you can choose from three options for controlling how Outlook users are warned about invalid signatures: - Let user decide if they want to be warned. This option enforces the default configuration. - Always warn about invalid signatures. - Never warn about invalid signatures. If you disable or do not configure this policy setting, if users open e-mail messages that include invalid digital signatures, Outlook displays a warning dialog. Users can decide whether they want to be warned about invalid signatures in the future.

This policy setting controls how Outlook retrieves Certificate Revocation Lists to verify the validity of certificates. Certificate revocation lists (CRLs) are lists of digital certificates that have been revoked by their controlling certificate authorities (CAs), typically because the certificates were issued improperly or their associated private keys were compromised. If you enable this policy setting, you can choose from three options to govern how Outlook uses CRLs: - Use system Default. Outlook relies on the CRL download schedule that is configured for the operating system. - When online always retrieve the CRL. This option is the default configuration in Outlook. - Never retrieve the CRL. Outlook will not attempt to download the CRL for a certificate, even if it is online. This option can reduce security. If you disable or do not configure this policy setting, when Outlook handles a certificate that includes a URL from which a CRL can be downloaded, Outlook will retrieve the CRL from the provided URL if Outlook is online.

This policy setting controls which set of security settings are enforced in Outlook. If you enable this policy setting, you can choose from four options for enforcing Outlook security settings: - Outlook Default Security - This option is the default configuration in Outlook. Users can configure security themselves, and Outlook ignores any security-related settings configured in Group Policy. - Use Security Form from "Outlook Security Settings" Public Folder - Outlook uses the settings from the security form published in the designated public folder. - Use Security Form from "Outlook 10 Security Settings" Public Folder - Outlook uses the settings from the security form published in the designated public folder. - Use Outlook Security Group Policy - Outlook uses security settings from Group Policy. Important: You must enable this policy setting if you want to apply the other Outlook security policy settings mentioned in this guide. If you disable or do not configure this policy setting, Outlook users can configure security for themselves, and Outlook ignores any security-related settings that are configured in Group Policy. Note: In previous versions of Outlook, when security settings were published in a form in Exchange Server public folders, users who needed these settings required the HKEY_CURRENT_USER >> Software >> Policies >> Microsoft >> Security >> CheckAdminSettings registry key to be set on their computers for the settings to apply. In Outlook, the CheckAdminSettings registry key is no longer used to determine users' security settings. Instead, the Outlook Security Mode setting can be used to determine whether Outlook security should be controlled directly by Group Policy, by the security form from the Outlook Security Settings Public Folder, or by the settings on users' own computers.

This policy setting controls whether Outlook users can demote attachments to Level 2 by using a registry key, which will allow them to save files to disk and open them from that location. Outlook uses two levels of security to restrict access to files attached to e-mail messages or other items. Files with specific extensions can be categorized as Level 1 (users cannot view the file) or Level 2 (users can open the file after saving it to disk). Users can freely open files of types that are not categorized as Level 1 or Level 2. If you enable this policy setting, users can create a list of Level 1 file types to demote to Level 2 by adding the file types to the following registry key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security\Level1Remove. If you disable or do not configure this policy setting, users cannot demote level 1 attachments to level 2, and the HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security\Level1Remove registry key has no effect.

This policy setting controls whether Outlook blocks potentially dangerous attachments designated Level 1. Outlook uses two levels of security to restrict users' access to files attached to e-mail messages or other items. Files with specific extensions can be categorized as Level 1 (users cannot view the file) or Level 2 (users can open the file after saving it to disk). Users can freely open files of types that are not categorized as Level 1 or Level 2. If you enable this policy setting, Outlook users can gain access to Level 1 file type attachments by first saving the attachments to disk and then opening them, as with Level 2 attachments. If you disable this policy setting, Level 1 attachments do not display under any circumstances. If you do not configure this policy setting, Outlook completely blocks access to Level 1 files, and requires users to save Level 2 files to disk before opening them.

This policy setting controls whether Outlook users can demote attachments to Level 2 by using a registry key, which will allow them to save files to disk and open them from that location. Outlook uses two levels of security to restrict access to files attached to email messages or other items. Files with specific extensions can be categorized as Level 1 (users cannot view the file) or Level 2 (users can open the file after saving it to disk). Users can freely open files of types that are not categorized as Level 1 or Level 2. If you enable this policy setting, users can create a list of Level 1 file types to demote to Level 2 by adding the file types to the following registry key: HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\Outlook\Security\Level1Remove. If this policy setting is disabled or not configured, users cannot demote Level 1 attachments to Level 2, and the HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\Outlook\Security\Level1Remove registry key has no effect.

This policy setting controls which types of attachments (determined by file extension) must be saved to disk before users can open them. Files with specific extensions can be categorized as Level 1 (users cannot view the file) or Level 2 (users can open the file after saving it to disk). Users can freely open files of types that are not categorized as Level 1 or Level 2. If you enable this policy setting, you can specify a list of attachment file types to classify as Level 2, which forces users to actively decide to download the attachment to view it. If you disable or do not configure this policy setting, Outlook does not classify any file type extensions as Level 2. Important: This policy setting only applies if the "Outlook Security Mode" policy setting under "Microsoft Outlook 2016\Security\Security Form Settings" is configured to "Use Outlook Security Group Policy".

This policy setting controls whether scripts can run in Outlook forms in which the script and layout are contained within the message. If you enable this policy setting, scripts can run in one-off Outlook forms. If you disable or do not configure this policy setting, Outlook does not run scripts in forms in which the script and the layout are contained within the message. Important: This policy setting only applies if the "Outlook Security Mode" policy setting under "Microsoft Outlook 2016\Security\Security Form Settings" is configured to "Use Outlook Security Group Policy".

This policy setting controls whether Outlook prompts users before executing a custom action. Custom actions add functionality to Outlook that can be triggered as part of a rule. Among other possible features, custom actions can be created that reply to messages in ways that circumvent the Outlook model's programmatic send protections. If this policy is enabled, four options are available to control how Outlook functions when a custom action is executed that uses the Outlook object model: - Prompt User - Automatically Approve - Automatically Deny - Prompt user based on computer security. This option enforces the default configuration in Outlook. If this policy is disabled or not configured, when Outlook or another program initiates a custom action using the Outlook object model, users are prompted to allow or reject the action. If this configuration is changed, malicious code can use the Outlook object model to compromise sensitive information or otherwise cause data and computing resources to be at risk. This is the equivalent of choosing Enabled -- Prompt user based on computer security.

This policy setting controls what happens when an untrusted program attempts to gain access to an Address Book using the Outlook object model. If you enable this policy setting, you can choose from four different options when an untrusted program attempts to programmatically access an Address Book using the Outlook object model: - Prompt user - Users are prompted to approve every access attempt. - Automatically approve - Outlook will automatically grant programmatic access requests from any program. This option can create a significant vulnerability, and is not recommended. - Automatically deny - Outlook will automatically deny programmatic access requests from any program. - Prompt user based on computer security - Outlook will rely on the setting in the ''Programmatic Access'' section of the Trust Center. This is the default behavior. If you disable or do not configure this policy setting, when an untrusted application attempts to access the address book programmatically, Outlook relies on the setting configured in the ''Programmatic Access'' section of the Trust Center.

This policy setting controls what happens when a user designs a custom form in Outlook and attempts to bind an Address Information field to a combination or formula custom field. If you enable this policy setting, you can choose from four different options when an untrusted program attempts to access address information using the UserProperties. Find method of the Outlook object model: - Prompt user. The user will be prompted to approve every access attempt. - Automatically approve. Outlook will automatically grant programmatic access requests from any program. This option can create a significant vulnerability, and is not recommended. - Automatically deny. Outlook will automatically deny programmatic access requests from any program. - Prompt user based on computer security. Outlook will only prompt users when antivirus software is out of date or not running. If you disable or do not configure this policy setting, when a user tries to bind an address information field to a combination or formula custom field in a custom form, Outlook relies on the setting configured in the "Programmatic Access" section of the Trust Center.

This policy setting controls what happens when an untrusted program attempts to use the Save As command to programmatically save an item. If you enable this policy setting, you can choose from four different options when an untrusted program attempts to use the Save As command to programmatically save an item: - Prompt user. The user will be prompted to approve every access attempt. - Automatically approve. Outlook will automatically grant programmatic access requests from any program. This option can create a significant vulnerability, and is not recommended. - Automatically deny. Outlook will automatically deny programmatic access requests from any program. - Prompt user based on computer security. Outlook will only prompt users when antivirus software is out of date or not running. This is the default configuration. If you disable or do not configure this policy setting, when an untrusted application attempts to use the Save As command, Outlook relies on the setting configured in the ''Programmatic Access'' section of the Trust Center.

This policy setting controls what happens when an untrusted program attempts to gain access to a recipient field, such as the ''To:'' field, using the Outlook object model. If you enable this policy setting, you can choose from four different options when an untrusted program attempts to access a recipient field using the Outlook object model: - Prompt user. The user will be prompted to approve every access attempt. - Automatically approve. Outlook will automatically grant programmatic access requests from any program. This option can create a significant vulnerability, and is not recommended. - Automatically deny. Outlook will automatically deny programmatic access requests from any program. - Prompt user based on computer security. Outlook will only prompt users when antivirus software is out of date or not running. This is the default configuration. If you disable or do not configure this policy setting, when an untrusted application attempts to access recipient fields, Outlook relies on the setting configured in the ''Programmatic Access'' section of the Trust Center.

This policy setting controls what happens when an untrusted program attempts to programmatically send e-mail in Outlook using the Response method of a task or meeting request. If you enable this policy setting, you can choose from four different options when an untrusted program attempts to programmatically send e-mail using the Response method of a task or meeting request: - Prompt user. The user will be prompted to approve every access attempt. - Automatically approve. Outlook will automatically grant programmatic access requests from any program. This option can create a significant vulnerability, and is not recommended. - Automatically deny. Outlook will automatically deny programmatic access requests from any program. - Prompt user based on computer security. Outlook only prompts users when antivirus software is out of date or not running. This is the default configuration. If you disable or do not configure this policy setting, when an untrusted application attempts to respond to tasks or meeting requests programmatically, Outlook relies on the setting configured in the ''Programmatic Access'' section of the Trust Center.

This policy setting controls what happens when an untrusted program attempts to send e-mail programmatically using the Outlook object model. If you enable this policy setting, you can choose from four different options when an untrusted program attempts to send e-mail programmatically using the Outlook object model: - Prompt user - The user will be prompted to approve every access attempt. - Automatically approve - Outlook will automatically grant programmatic access requests from any program. This option can create a significant vulnerability, and is not recommended. - Automatically deny - Outlook will automatically deny programmatic access requests from any program. - Prompt user based on computer security. Outlook will only prompt users when antivirus software is out of date or not running. Important: This policy setting only applies if the "Outlook Security Mode" policy setting under "Microsoft Outlook 2016\Security\Security Form Settings" is configured to "Use Outlook Security Group Policy". If you disable or do not configure this policy setting, when an untrusted application attempts to send mail programmatically, Outlook relies on the setting configured in the ''Programmatic Access'' section of the Trust Center.

This policy setting controls whether hyperlinks in suspected phishing e-mail messages in Outlook are allowed. If you enable this policy setting, Outlook will allow hyperlinks in suspected phishing messages that are not also classified as junk e-mail. If you disable or do not configure this policy setting, Outlook will not allow hyperlinks in suspected phishing messages, even if they are not classified as junk e-mail.

This policy setting controls the security level for macros in Outlook. If you enable this policy setting, you can choose from four options for handling macros in Outlook: - Always warn. This option corresponds to the "Warnings for all macros" option in the "Macro Security" section of the Outlook Trust Center. Outlook disables all macros that are not opened from a trusted location, even if the macros are signed by a trusted publisher. For each disabled macro, Outlook displays a security alert dialog box with information about the macro and its digital signature (if present), and allows users to enable the macro or leave it disabled. - Never warn, disable all. This option corresponds to the "No warnings and disable all macros" option in the Trust Center. Outlook disables all macros that are not opened from trusted locations, and does not notify users. - Warning for signed, disable unsigned. This option corresponds to the "Warnings for signed macros; all unsigned macros are disabled" option in the Trust Center. Outlook handles macros as follows: --If a macro is digitally signed by a trusted publisher, the macro can run if the user has already trusted the publisher. --If a macro has a valid signature from a publisher that the user has not trusted, the security alert dialog box for the macro lets the user choose whether to enable the macro for the current session, disable the macro for the current session, or to add the publisher to the Trusted Publishers list so that it will run without prompting the user in the future. --If a macro does not have a valid signature, Outlook disables it without prompting the user, unless it is opened from a trusted location. This option is the default configuration in Outlook. - No security check. This option corresponds to the "No security check for macros (Not recommended)" option in the Trust Center. Outlook runs all macros without prompting users. This configuration makes users' computers vulnerable to potentially malicious code and is not recommended. If you disable or do not configure this policy setting, the behavior is the equivalent of Enabled -- Warning for signed, disable unsigned.

This policy setting controls whether trusted locations on the network can be used. If you enable this policy setting, users can specify trusted locations on network shares or in other remote locations that are not under their direct control by clicking the "Add new location" button in the Trusted Locations section of the Trust Center. Content, code, and add-ins are allowed to load from trusted locations with minimal security and without prompting the user for permission. If you disable this policy setting, the selected application ignores any network locations listed in the Trusted Locations section of the Trust Center. If you also deploy Trusted Locations via Group Policy, you should verify whether any of them are remote locations. If any of them are remote locations and you do not allow remote locations via this policy setting, those policy keys that point to remote locations will be ignored on client computers. Disabling this policy setting does not delete any network locations from the Trusted Locations list, but causes disruption for users who add network locations to the Trusted Locations list. Users are also prevented from adding new network locations to the Trusted Locations list in the Trust Center. We recommended that you do not enable this policy setting as the "Allow Trusted Locations on my network (not recommended)" check box also states. Therefore, in practice, it should be possible to disable this policy setting in most situations without causing significant usability issues for most users. If you do not enable this policy setting, users can select the "Allow Trusted Locations on my network (not recommended)" check box if desired and then specify trusted locations by clicking the "Add new location" button.

This policy setting controls whether the specified Office application notifies users when unsigned application add-ins are loaded or silently disable such add-ins without notification. This policy setting only applies if the "Require that application add-ins are signed by Trusted Publisher" policy setting is enabled, which prevents users from changing this policy setting. If this policy setting is enabled, applications automatically disable unsigned add-ins without informing users. If this policy setting is disabled, if this application is configured to require that all add-ins be signed by a trusted publisher, any unsigned add-ins the application loads will be disabled and the application will display the Trust Bar at the top of the active window. The Trust Bar contains a message that informs users about the unsigned add-in. If this policy setting is not configured, the disable behavior applies, and in addition, users can configure this requirement themselves in the "Add-ins" category of the Trust Center for the application.

This policy setting controls how the specified applications warn users when Visual Basic for Applications (VBA) macros are present. If you enable this policy setting, you can choose from four options for determining how the specified applications will warn the user about macros: - Disable all with notification: The application displays the Trust Bar for all macros, whether signed or unsigned. This option enforces the default configuration in Office. This option also allows users to potentially enable unsigned/untrusted macros. If a site requires the use of macros, they must be signed /approved and added to appropriate locations listed in the Trust Center Settings. - Disable all except digitally signed macros: The application displays the Trust Bar for digitally signed macros, allowing users to enable them or leave them disabled. Any unsigned macros are disabled, and users are not notified. - Disable all without notification: The application disables all macros, whether signed or unsigned, and does not notify users. - Enable all macros (not recommended): All macros are enabled, whether signed or unsigned. This option can significantly reduce security by allowing dangerous code to run undetected. If you disable this policy setting, "Disable all with notification" will be the default setting. If you do not configure this policy setting, when users open files in the specified applications that contain VBA macros, the applications open the files with the macros disabled and display the Trust Bar with a warning that macros are present and have been disabled. Users can inspect and edit the files if appropriate, but cannot use any disabled functionality until they enable it by clicking "Enable Content" on the Trust Bar. If the user clicks "Enable Content", then the document is added as a trusted document. Important: If "Disable all except digitally signed macros" is selected, users will not be able to open unsigned Access databases.

This policy setting controls how the specified applications warn users when Visual Basic for Applications (VBA) macros are present. If you enable this policy setting, you can choose from four options for determining how the specified applications will warn the user about macros: - Disable all with notification: The application displays the Trust Bar for all macros, whether signed or unsigned. This option enforces the default configuration in Office. This option also allows users to potentially enable unsigned/untrusted macros. If a site requires the use of macros, they must be signed /approved and added to appropriate locations listed in the Trust Center Settings. - Disable all except digitally signed macros: The application displays the Trust Bar for digitally signed macros, allowing users to enable them or leave them disabled. Any unsigned macros are disabled, and users are not notified. - Disable all without notification: The application disables all macros, whether signed or unsigned, and does not notify users. - Enable all macros (not recommended): All macros are enabled, whether signed or unsigned. This option can significantly reduce security by allowing dangerous code to run undetected. If you disable this policy setting, "Disable all with notification" will be the default setting. If you do not configure this policy setting, when users open files in the specified applications that contain VBA macros, the applications open the files with the macros disabled and display the Trust Bar with a warning that macros are present and have been disabled. Users can inspect and edit the files if appropriate, but cannot use any disabled functionality until they enable it by clicking "Enable Content" on the Trust Bar. If the user clicks "Enable Content", then the document is added as a trusted document. Important: If "Disable all except digitally signed macros" is selected, users will not be able to open unsigned Access databases.

This policy setting controls the prompting and activation behavior for the "Run Programs" option for action buttons in PowerPoint. If you enable this policy setting, you can choose from three options to control how the "Run Programs" option functions: - Disable (do not run any programs). If users click an action button with the "Run Programs" action assigned to it, nothing will happen. This option enforces the default configuration in PowerPoint.

This policy setting allows you to determine whether users can open, view, edit, or save PowerPoint files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to determine if users can open, view, or edit Word files. If you enable this policy setting, you can set one of these options: - Blocked files are not opened. - Blocked files open in Protected View and cannot be edited. - Blocked files open in Protected View and can be edited. If you disable or do not configure this policy setting, the behavior is the same as the "Blocked files are not opened" setting. Users will not be able to open blocked files.

This policy setting controls whether encrypted macros in Open XML presentations are required to be scanned with anti-virus software before being opened. If you enable this policy setting, you may choose one of these options: - Scan encrypted macros: Encrypted macros are disabled unless anti-virus software is installed. Encrypted macros are scanned by your anti-virus software when you attempt to open an encrypted presentation that contains macros. - Scan if anti-virus software available: If anti-virus software is installed, scan the encrypted macros first before allowing them to load. If anti-virus software is not available, allow encrypted macros to load. - Load macros without scanning: Do not check for anti-virus software and allow macros to be loaded in an encrypted file. If you disable or do not configure this policy setting, the behavior will be similar to the "Scan encrypted macros" option.

This policy setting allows you to turn off the file validation feature. If you enable this policy setting, file validation will be turned off. If you disable or do not configure this policy setting, file validation will be turned on. Office Binary Documents (97-2003) are checked to see if they conform against the file format schema before they are opened.

This policy setting allows you to block macros from running in Office files that come from the Internet. If you enable this policy setting, macros are blocked from running, even if "Enable all macros" is selected in the Macro Settings section of the Trust Center. Also, instead of having the choice to "Enable Content", users will receive a notification that macros are blocked from running. If the Office file is saved to a trusted location or was previously trusted by the user, macros will be allowed to run. If you disable or do not configure this policy setting, the settings configured in the Macro Settings section of the Trust Center determine whether macros run in Office files that come from the Internet.

This policy setting controls whether the specified Office application notifies users when unsigned application add-ins are loaded or silently disable such add-ins without notification. This policy setting only applies if the "Require that application add-ins are signed by Trusted Publisher" policy setting is enabled, which prevents users from changing this policy setting. If this policy setting is enabled, applications automatically disable unsigned add-ins without informing users. If this policy setting is disabled, if this application is configured to require that all add-ins be signed by a trusted publisher, any unsigned add-ins the application loads will be disabled and the application will display the Trust Bar at the top of the active window. The Trust Bar contains a message that informs users about the unsigned add-in. If this policy setting is not configured, the disable behavior applies, and in addition, users can configure this requirement themselves in the "Add-ins" category of the Trust Center for the application.

This policy setting allows you to determine if files downloaded from the Internet zone open in Protected View. If you enable this policy setting, files downloaded from the Internet zone do not open in Protected View. If you disable or do not configure this policy setting, files downloaded from the Internet zone open in Protected View.

This policy setting allows for determining whether PowerPoint files in Outlook attachments open in Protected View. If enabling this policy setting, Outlook attachments do not open in Protected View. If disabling or not configuring this policy setting, Outlook attachments open in Protected View.

This policy setting determines whether files located in unsafe locations will open in Protected View. If unsafe locations have not been specified, only the "Downloaded Program Files" and "Temporary Internet Files" folders are considered unsafe locations. If enabling this policy setting, files located in unsafe locations do not open in Protected View. If disabling or not configuring this policy setting, files located in unsafe locations open in Protected View.

This policy setting controls how Office handles documents when they fail file validation. If you enable this policy setting, you can configure the following options for files that fail file validation: - Block files completely. Users cannot open the files. - Open files in Protected View and disallow edit. Users cannot edit the files. This is also how Office handles the files if you disable this policy setting. - Open files in Protected View and allow edit. Users can edit the files. This is also how Office handles the files if you do not configure this policy setting. If you disable this policy setting, Office follows the "Open files in Protected View and disallow edit" behavior. If you do not configure this policy setting, Office follows the "Open files in Protected View and allow edit" behavior.

This policy setting controls whether trusted locations on the network can be used. If you enable this policy setting, users can specify trusted locations on network shares or in other remote locations that are not under their direct control by clicking the "Add new location" button in the Trusted Locations section of the Trust Center. Content, code, and add-ins are allowed to load from trusted locations with minimal security and without prompting the user for permission. If you disable this policy setting, the selected application ignores any network locations listed in the Trusted Locations section of the Trust Center. If you also deploy Trusted Locations via Group Policy, you should verify whether any of them are remote locations. If any of them are remote locations and you do not allow remote locations via this policy setting, those policy keys that point to remote locations will be ignored on client computers. Disabling this policy setting does not delete any network locations from the Trusted Locations list, but causes disruption for users who add network locations to the Trusted Locations list. Users are also prevented from adding new network locations to the Trusted Locations list in the Trust Center. It is recommended that you do not enable this policy setting, as the "Allow Trusted Locations on my network (not recommended) check box also states. Therefore, in practice, it should be possible to disable this policy setting in most situations without causing significant usability issues for most users. If you do not enable this policy setting, users can select the "Allow Trusted Locations on my network (not recommended)" check box if desired and then specify trusted locations by clicking the "Add new location" button.

This policy setting controls whether the specified Office application notifies users when unsigned application add-ins are loaded or silently disable such add-ins without notification. This policy setting only applies if you enable the "Require that application add-ins are signed by Trusted Publisher" policy setting, which prevents users from changing this policy setting. If you enable this policy setting, applications automatically disable unsigned add-ins without informing users. If you disable this policy setting, if this application is configured to require that all add-ins be signed by a trusted publisher, any unsigned add-ins the application loads will be disabled and the application will display the Trust Bar at the top of the active window. The Trust Bar contains a message that informs users about the unsigned add-in. If you do not configure this policy setting, the disable behavior applies, and in addition, users can configure this requirement themselves in the "Add-ins" category of the Trust Center for the application.

This policy setting controls whether the specified Office application notifies users when unsigned application add-ins are loaded or silently disable such add-ins without notification. This policy setting only applies if the "Require that application add-ins are signed by Trusted Publisher" policy setting is enabled, which prevents users from changing this policy setting. If this policy setting is enabled, applications automatically disable unsigned add-ins without informing users. If this policy setting is disabled, if this application is configured to require that all add-ins be signed by a trusted publisher, any unsigned add-ins the application loads will be disabled and the application will display the Trust Bar at the top of the active window. The Trust Bar contains a message that informs users about the unsigned add-in. If this policy setting is not configured, the disable behavior applies, and in addition, users can configure this requirement themselves in the "Add-ins" category of the Trust Center for the application.

This policy setting controls how the specified applications warn users when Visual Basic for Applications (VBA) macros are present. If this policy setting is enabled, users can choose from four options for determining how the specified applications will warn the user about macros: - Disable all with notification: The application displays the Trust Bar for all macros, whether signed or unsigned. This option enforces the default configuration in Office. This option also allows users to potentially enable unsigned/untrusted macros. If a site requires the use of macros, they must be signed/approved and added to appropriate locations listed in the Trust Center Settings. - Disable all except digitally signed macros: The application displays the Trust Bar for digitally signed macros, allowing users to enable them or leave them disabled. Any unsigned macros are disabled, and users are not notified. - Disable all without notification: The application disables all macros, whether signed or unsigned, and does not notify users. - Enable all macros (not recommended): All macros are enabled, whether signed or unsigned. This option can significantly reduce security by allowing dangerous code to run undetected. If this policy setting is disabled, "Disable all with notification" will be the default setting. If this policy setting is not configured, when users open files in the specified applications that contain VBA macros, the applications open the files with the macros disabled and display the Trust Bar with a warning that macros are present and have been disabled. Users can inspect and edit the files if appropriate, but cannot use any disabled functionality until they enable it by clicking "Enable Content" on the Trust Bar. If the user clicks "Enable Content", then the document is added as a trusted document. Important: If "Disable all except digitally signed macros" is selected, users will not be able to open unsigned Access databases.

This policy setting controls how the specified applications warn users when Visual Basic for Applications (VBA) macros are present. If you enable this policy setting, you can choose from four options for determining how the specified applications will warn the user about macros: - Disable all with notification: The application displays the Trust Bar for all macros, whether signed or unsigned. This option enforces the default configuration in Office. This option also allows users to potentially enable unsigned/untrusted macros. If a site requires the use of macros, they must be signed /approved and added to appropriate locations listed in the Trust Center Settings. - Disable all except digitally signed macros: The application displays the Trust Bar for digitally signed macros, allowing users to enable them or leave them disabled. Any unsigned macros are disabled, and users are not notified. - Disable all without notification: The application disables all macros, whether signed or unsigned, and does not notify users. - Enable all macros (not recommended): All macros are enabled, whether signed or unsigned. This option can significantly reduce security by allowing dangerous code to run undetected. If you disable this policy setting, "Disable all with notification" will be the default setting. If you do not configure this policy setting, when users open files in the specified applications that contain VBA macros, the applications open the files with the macros disabled and display the Trust Bar with a warning that macros are present and have been disabled. Users can inspect and edit the files if appropriate, but cannot use any disabled functionality until they enable it by clicking "Enable Content" on the Trust Bar. If the user clicks "Enable Content", then the document is added as a trusted document. Important: If "Disable all except digitally signed macros" is selected, users will not be able to open unsigned Access databases.

This policy setting controls whether trusted locations on the network can be used. If you enable this policy setting, users can specify trusted locations on network shares or in other remote locations that are not under their direct control by clicking the "Add new location" button in the Trusted Locations section of the Trust Center. Content, code, and add-ins are allowed to load from trusted locations with minimal security and without prompting the user for permission. If you disable this policy setting, the selected application ignores any network locations listed in the Trusted Locations section of the Trust Center. If you also deploy Trusted Locations via Group Policy, you should verify whether any of them are remote locations. If any of them are remote locations and you do not allow remote locations via this policy setting, those policy keys that point to remote locations will be ignored on client computers. Disabling this policy setting does not delete any network locations from the Trusted Locations list, but causes disruption for users who add network locations to the Trusted Locations list. Users are also prevented from adding new network locations to the Trusted Locations list in the Trust Center. We recommended that you do not enable this policy setting as the "Allow Trusted Locations on my network (not recommended)" check box also states. Therefore, in practice, it should be possible to disable this policy setting in most situations without causing significant usability issues for most users. If you do not enable this policy setting, users can select the "Allow Trusted Locations on my network (not recommended)" check box if desired and then specify trusted locations by clicking the "Add new location" button.

This policy setting controls whether the specified Office application notifies users when unsigned application add-ins are loaded or silently disable such add-ins without notification. This policy setting only applies if the "Require that application add-ins are signed by Trusted Publisher" policy setting is enabled, which prevents users from changing this policy setting. If this policy setting is enabled, applications automatically disable unsigned add-ins without informing users. If this policy setting is disabled, if this application is configured to require that all add-ins be signed by a trusted publisher, any unsigned add-ins the application loads will be disabled and the application will display the Trust Bar at the top of the active window. The Trust Bar contains a message that informs users about the unsigned add-in. If this policy setting is not configured, the disable behavior applies, and in addition, users can configure this requirement themselves in the "Add-ins" category of the Trust Center for the application.

This policy setting allows you to determine whether users can open or save Visio files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. -Do not block: The file type will not be blocked. -Save blocked: Saving of the filet type will be blocked. -Open/Save blocked: Both opening and saving of the file type will be blocked. If you disable or do not configure this policy setting, the file type will be blocked.

This policy setting allows you to determine whether users can open or save Visio files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. -Do not block: The file type will not be blocked. -Save blocked: Saving of the filet type will be blocked. -Open/Save blocked: Both opening and saving of the file type will be blocked. If you disable or do not configure this policy setting, the file type will be blocked.

This policy setting allows you to determine whether users can open or save Visio files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. -Do not block: The file type will not be blocked. -Save blocked: Saving of the filet type will be blocked. -Open/Save blocked: Both opening and saving of the file type will be blocked. If you disable or do not configure this policy setting, the file type will be blocked.

This policy setting allows you to block macros from running in Office files that come from the Internet. If you enable this policy setting, macros are blocked from running, even if “Enable all macros” is selected in the Macro Settings section of the Trust Center. Also, instead of having the choice to “Enable Content”, users will receive a notification that macros are blocked from running. If the Office file is saved to a trusted location or was previously trusted by the user, macros will be allowed to run. If you disable or do not configure this policy setting, the settings configured in the Macro Settings section of the Trust Center determine whether macros run in Office files that come from the Internet.

This policy setting controls whether the specified Office application notifies users when unsigned application add-ins are loaded or silently disable such add-ins without notification. This policy setting only applies if the "Require that application add-ins are signed by Trusted Publisher" policy setting is enabled, which prevents users from changing this policy setting. If this policy setting is enabled, applications automatically disable unsigned add-ins without informing users. If this policy setting is disabled, if this application is configured to require that all add-ins be signed by a trusted publisher, any unsigned add-ins the application loads will be disabled and the application will display the Trust Bar at the top of the active window. The Trust Bar contains a message that informs users about the unsigned add-in. If this policy setting is not configured, the disable behavior applies, and in addition, users can configure this requirement themselves in the "Add-ins" category of the Trust Center for the application.

This policy setting controls whether encrypted macros in Open XML documents be are required to be scanned with anti-virus software before being opened. If you enable this policy setting, you may choose one of these options: - Scan encrypted macros: encrypted macros are disabled unless anti-virus software is installed. Encrypted macros are scanned by your anti-virus software when you attempt to open an encrypted workbook that contains macros. - Scan if anti-virus software available: if anti-virus software is installed, scan the encrypted macros first before allowing them to load. If anti-virus software is not available, allow encrypted macros to load. - Load macros without scanning: do not check for anti-virus software and allow macros to be loaded in an encrypted file. If you disable or do not configure this policy setting, the behavior will be similar to the "Scan encrypted macros" option.

This policy setting allows you to determine if files downloaded from the Internet zone open in Protected View. If you enable this policy setting, files downloaded from the Internet zone do not open in Protected View. If you disable or do not configure this policy setting, files downloaded from the Internet zone open in Protected View.

This policy setting lets you determine if files located in unsafe locations will open in Protected View. If you have not specified unsafe locations, only the "Downloaded Program Files" and "Temporary Internet Files" folders are considered unsafe locations. If you enable this policy setting, files located in unsafe locations do not open in Protected View. If you disable or do not configure this policy setting, files located in unsafe locations open in Protected View.

This policy setting controls how Office handles documents when they fail file validation. If you enable this policy setting, you can configure the following options for files that fail file validation: - Block files completely. Users cannot open the files. - Open files in Protected View and disallow edit. Users cannot edit the files. This is also how Office handles the files if you disable this policy setting. - Open files in Protected View and allow edit. Users can edit the files. This is also how Office handles the files if you do not configure this policy setting. If you disable this policy setting, Office follows the "Open files in Protected View and disallow edit" behavior. If you do not configure this policy setting, Office follows the "Open files in Protected View and allow edit" behavior.

This policy setting allows you to determine if Word files in Outlook attachments open in Protected View. If you enable this policy setting, Outlook attachments do not open in Protected View. If you disable or do not configure this policy setting, Outlook attachments open in Protected View.

This policy setting allows you to determine if users can open, view, or edit Word files. If you enable this policy setting, you can set one of these options: - Blocked files are not opened. - Blocked files open in Protected View and cannot be edited. - Blocked files open in Protected View and can be edited. If you disable or do not configure this policy setting, the behavior is the same as the "Blocked files are not opened" setting. Users will not be able to open blocked files.

This policy setting allows you to determine whether users can open, view, edit, or save Word files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will be blocked.

This policy setting allows you to determine whether users can open, view, edit, or save Word files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to determine whether users can open, view, edit, or save Word files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to determine whether users can open, view, edit, or save Word files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to determine whether users can open, view, edit, or save Word files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to determine whether users can open, view, edit, or save Word files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to determine whether users can open, view, edit, or save Word files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to determine whether users can open, view, edit, or save Word files with the format specified by the title of this policy setting. If you enable this policy setting, you can specify whether users can open, view, edit, or save files. The options that can be selected are below. Note: Not all options may be available for this policy setting. - Do not block: The file type will not be blocked. - Save blocked: Saving of the file type will be blocked. - Open/Save blocked, use open policy: Both opening and saving of the file type will be blocked. The file will open based on the policy setting configured in the "default file block behavior" key. - Block: Both opening and saving of the file type will be blocked, and the file will not open. - Open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit the file type will not be enabled. - Allow editing and open in Protected View: Both opening and saving of the file type will be blocked, and the option to edit will be enabled. If you disable or do not configure this policy setting, the file type will not be blocked.

This policy setting allows you to block macros from running in Office files that come from the Internet. If you enable this policy setting, macros are blocked from running, even if "Enable all macros" is selected in the Macro Settings section of the Trust Center. Also, instead of having the choice to "Enable Content", users will receive a notification that macros are blocked from running. If the Office file is saved to a trusted location or was previously trusted by the user, macros will be allowed to run. If you disable or do not configure this policy setting, the settings configured in the Macro Settings section of the Trust Center determine whether macros run in Office files that come from the Internet.

This policy setting controls whether trusted locations on the network can be used. If you enable this policy setting, users can specify trusted locations on network shares or in other remote locations that are not under their direct control by clicking the "Add new location" button in the Trusted Locations section of the Trust Center. Content, code, and add-ins are allowed to load from trusted locations with minimal security and without prompting the user for permission. If you disable this policy setting, the selected application ignores any network locations listed in the Trusted Locations section of the Trust Center. If you also deploy Trusted Locations via Group Policy, you should verify whether any of them are remote locations. If any of them are remote locations and you do not allow remote locations via this policy setting, those policy keys that point to remote locations will be ignored on client computers. Disabling this policy setting does not delete any network locations from the Trusted Locations list, but causes disruption for users who add network locations to the Trusted Locations list. Users are also prevented from adding new network locations to the Trusted Locations list in the Trust Center. We recommended that you do not enable this policy setting as the "Allow Trusted Locations on my network (not recommended)" check box also states. Therefore, in practice, it should be possible to disable this policy setting in most situations without causing significant usability issues for most users. If you do not enable this policy setting, users can select the "Allow Trusted Locations on my network (not recommended)" check box if desired and then specify trusted locations by clicking the "Add new location" button.

This policy setting controls how the specified applications warn users when Visual Basic for Applications (VBA) macros are present. If you enable this policy setting, you can choose from four options for determining how the specified applications will warn the user about macros: - Disable all with notification: The application displays the Trust Bar for all macros, whether signed or unsigned. This option enforces the default configuration in Office. This option also allows users to potentially enable unsigned/untrusted macros. If a site requires the use of macros, they must be signed /approved and added to appropriate locations listed in the Trust Center Settings. - Disable all except digitally signed macros: The application displays the Trust Bar for digitally signed macros, allowing users to enable them or leave them disabled. Any unsigned macros are disabled, and users are not notified. - Disable all without notification: The application disables all macros, whether signed or unsigned, and does not notify users. - Enable all macros (not recommended): All macros are enabled, whether signed or unsigned. This option can significantly reduce security by allowing dangerous code to run undetected.

This policy setting allows the file validation feature to be turned off. If this policy setting is enabled, file validation will be turned off. If this policy setting is disabled or not configured, file validation will be turned on. Office Binary Documents (97-2003) are checked to see if they conform to the file format schema before they are opened.