z/OS BMC IOA for ACF2 STIG

Compare

Select any two versions of this STIG to compare the individual requirements

View

Select any old version/release of this STIG to view the previous requirements

Vuln ID:
V-16932
Rule ID:
SV-31824r2_rule
Group ID:
ZB000000
Version:
ZIOAA000
CCI:
Severity:
Medium
Description:
BMC IOA installation data sets have the ability to use privileged functions and/or have access to sensitive data. Failure to properly restrict access to these data sets could result in violating the integrity of the base product which could result in compromising the operating system or sensitive data.Information Assurance OfficerSystems ProgrammerDCSL-1, ECAR-1, ECAR-2, ECCD-1, ECCD-2
BMC IOA installation data sets have the ability to use privileged functions and/or have access to sensitive data. Failure to properly restrict access to these data sets could result in violating the integrity of the base product which could result in compromising the operating system or sensitive data.Information Assurance OfficerSystems Programmer
Check:
Refer to the following report produced by the Data Set and Resource Data Collection: - SENSITVE.RPT(IOARPT) Automated Analysis Refer to the following report produced by the Data Set and Resource Data Collection: - PDI(ZIOA0000) Verify that the accesses to the BMC IOA installation data sets are properly restricted. If the following guidance is true, this is not a finding. ___ The ACF2 data set access authorizations restrict READ access to auditors, BMC users, operations, production control and scheduling personnel, and BMC STCs and/or batch users. ___ The ACF2 data set access authorizations restrict WRITE and/or greater access to systems programming personnel. ___ The ACF2 data set access authorizations specify that all (i.e., failures and successes) WRITE and/or greater access are logged.
Refer to the following report produced by the Data Set and Resource Data Collection: - SENSITVE.RPT(IOARPT) Automated Analysis Refer to the following report produced by the Data Set and Resource Data Collection: - PDI(ZIOA0000) Verify that the accesses to the BMC IOA installation data sets are properly restricted. If the following guidance is true, this is not a finding. ___ The ACF2 data set access authorizations restrict READ access to auditors, BMC users, operations, production control and scheduling personnel, and BMC STCs and/or batch users. ___ The ACF2 data set access authorizations restrict WRITE and/or greater access to systems programming personnel. ___ The ACF2 data set access authorizations specify that all (i.e., failures and successes) WRITE and/or greater access are logged.
Fix:
The IAO will ensure that WRITE and/or greater access to BMC IOA installation data sets are limited to System Programmers only. READ access can be given to auditors, BMC users, operations, production control and scheduling personnel, and BMC STCs and/or batch users. All failures and successful WRITE and/or greater accesses are logged. The installing Systems Programmer will identify and document the product data sets and categorize them according to who will have update and alter access and if required that all update and allocate access is logged. He will identify if any additional groups have update and/or alter access for specific data sets, and once documented he will work with the IAO to see that they are properly restricted to the ACP (Access Control Program) active on the system. (Note: The data sets and/or data set prefixes identified below are examples of a possible installation. The actual data sets and/or prefixes are determined when the product is actually installed on a system through the product’s installation guide and can be site specific.) Data sets to be protected will be: SYS2.IOA.*.IOAI. The following commands are provided as a sample for implementing data set controls: $KEY(SYS2) IOA.-.IOAI.- UID(<syspaudt>) R(A) W(L) A(L) E(A) IOA.-.IOAI.- UID(<tstcaudt>) R(A) W(L) A(L) E(A) IOA.-.IOAI.- UID(<audtaudt>) R(A) E(A) IOA.-.IOAI.- UID(<bmcuser>) R(A) E(A) IOA.-.IOAI.- UID(<operaudt>) R(A) E(A) IOA.-.IOAI.- UID(<pcspaudt>) R(A) E(A) IOA.-.IOAI.- UID(BMC STCs) R(A) E(A)
The IAO will ensure that WRITE and/or greater access to BMC IOA installation data sets are limited to System Programmers only. READ access can be given to auditors, BMC users, operations, production control and scheduling personnel, and BMC STCs and/or batch users. All failures and successful WRITE and/or greater accesses are logged. The installing Systems Programmer will identify and document the product data sets and categorize them according to who will have update and alter access and if required that all update and allocate access is logged. He will identify if any additional groups have update and/or alter access for specific data sets, and once documented he will work with the IAO to see that they are properly restricted to the ACP (Access Control Program) active on the system. (Note: The data sets and/or data set prefixes identified below are examples of a possible installation. The actual data sets and/or prefixes are determined when the product is actually installed on a system through the product’s installation guide and can be site specific.) Data sets to be protected will be: SYS2.IOA.*.IOAI. The following commands are provided as a sample for implementing data set controls: $KEY(SYS2) IOA.-.IOAI.- UID(<syspaudt>) R(A) W(L) A(L) E(A) IOA.-.IOAI.- UID(<tstcaudt>) R(A) W(L) A(L) E(A) IOA.-.IOAI.- UID(<audtaudt>) R(A) E(A) IOA.-.IOAI.- UID(<bmcuser>) R(A) E(A) IOA.-.IOAI.- UID(<operaudt>) R(A) E(A) IOA.-.IOAI.- UID(<pcspaudt>) R(A) E(A) IOA.-.IOAI.- UID(BMC STCs) R(A) E(A)
Vuln ID:
V-17067
Rule ID:
SV-31946r2_rule
Group ID:
ZB000001
Version:
ZIOAA001
CCI:
Severity:
Medium
Description:
BMC IOA STC data sets have the ability to use privileged functions and/or have access to sensitive data. Failure to properly restrict access to these data sets could result in violating the integrity of the base product which could result in compromising the operating system or sensitive data.Information Assurance OfficerSystems ProgrammerDCSL-1, ECAR-1, ECAR-2, ECAR-3, ECCD-1, ECCD-2
BMC IOA STC data sets have the ability to use privileged functions and/or have access to sensitive data. Failure to properly restrict access to these data sets could result in violating the integrity of the base product which could result in compromising the operating system or sensitive data.Information Assurance OfficerSystems Programmer
Check:
Refer to the following report produced by the Data Set and Resource Data Collection: - SENSITVE.RPT(IOASTC) Automated Analysis Refer to the following report produced by the Data Set and Resource Data Collection: - PDI(ZIOA0001) Verify that the accesses to the BMC IOA STC data sets are properly restricted. If the following guidance is true, this is not a finding. ___ The ACF2 data set access authorizations restrict READ access to auditors. ___ The ACF2 data set access authorizations restrict WRITE and/or greater access to systems programming personnel. ___ The ACF2 data set access authorizations restrict UPDATE access to the BMC STCs and/or batch users.
Refer to the following report produced by the Data Set and Resource Data Collection: - SENSITVE.RPT(IOASTC) Automated Analysis Refer to the following report produced by the Data Set and Resource Data Collection: - PDI(ZIOA0001) Verify that the accesses to the BMC IOA STC data sets are properly restricted. If the following guidance is true, this is not a finding. ___ The ACF2 data set access authorizations restrict READ access to auditors and BMC users ___ The ACF2 data set access authorizations restrict WRITE and/or greater access to systems programming personnel. ___ The ACF2 data set access authorizations restrict UPDATE access to the BMC STCs, batch users and BMC administrators.
Fix:
The IAO will ensure that WRITE and/or greater access to BMC IOA STC data sets are limited to System Programmers only. UPDATE access can be given to BMC STCs and/or batch users. READ access can be given to auditors. The installing Systems Programmer will identify and document the product data sets and categorize them according to who will have update and alter access and if required that all update and allocate access is logged. He will identify if any additional groups have update and/or alter access for specific data sets, and once documented he will work with the IAO to see that they are properly restricted to the ACP (Access Control Program) active on the system. (Note: The data sets and/or data set prefixes identified below are examples of a possible installation. The actual data sets and/or prefixes are determined when the product is actually installed on a system through the product’s installation guide and can be site specific.) Data sets to be protected will be: SYS3.IOA.*.IOAO. The following commands are provided as a sample for implementing data set controls: $KEY(SYS3) IOA.-.IOAO.- UID(<syspaudt>) R(A) W(A) A(A) E(A) IOA.-.IOAO.- UID(<tstcaudt>) R(A) W(A) A(A) E(A) IOA.-.IOAO.- UID(BMC STCs) R(A) W(A) E(A) IOA.-.IOAO.- UID(<audtaudt>) R(A) E(A)
Ensure that WRITE and/or greater access to BMC IOA STC data sets are limited to System Programmers only. UPDATE access can be given to BMC STCs, batch users and BMC administrators. READ access can be given to auditors and BMC users. The installing Systems Programmer will identify and document the product data sets and categorize them according to who will have update and alter access and if required that all update and allocate access is logged. The installing System Programmer will identify if any additional groups have update and/or alter access for specific data sets, and once documented will work with the IAO to see that they are properly restricted to the ACP (Access Control Program) active on the system. (Note: The data sets and/or data set prefixes identified below are examples of a possible installation. The actual data sets and/or prefixes are determined when the product is actually installed on a system through the product’s installation guide and can be site specific.) Data sets to be protected will be: SYS3.IOA.*.IOAO. The following commands are provided as a sample for implementing data set controls: $KEY(SYS3) IOA.-.IOAO.- UID(<syspaudt>) R(A) W(A) A(A) E(A) IOA.-.IOAO.- UID(<tstcaudt>) R(A) W(A) A(A) E(A) IOA.-.IOAO.- UID(BMC STCs) R(A) W(A) E(A) IOA.-.IOAO.- UID(<bmcadmin>)R(A) W(A) E(A) IOA.-.IOAO.- UID(<audtaudt>)R(A) E(A) IOA.-.IOAO.- UID(<bmcuser>) R(A) E(A
Vuln ID:
V-17452
Rule ID:
SV-32076r2_rule
Group ID:
ZB000030
Version:
ZIOAA030
CCI:
Severity:
Medium
Description:
BMC IOA requires a started task that will be restricted to certain resources, datasets and other system functions. By defining the started task as a userid to the system ACP, It allows the ACP to control the access and authorized users that require these capabilities. Failure to properly control these capabilities, could compromise of the operating system environment, ACP, and customer data.Information Assurance OfficerECCD-1, ECCD-2
BMC IOA requires a started task that will be restricted to certain resources, datasets and other system functions. By defining the started task as a userid to the system ACP, It allows the ACP to control the access and authorized users that require these capabilities. Failure to properly control these capabilities, could compromise of the operating system environment, ACP, and customer data.Information Assurance Officer
Check:
Refer to the following report produced by the ACF2 Data Collection: - ACF2CMDS.RPT(ATTSTC) Verify that the logonid(s) for the BMC IOA started task(s) is (are) properly defined. If the following attributes are defined, this is not a finding. STC MUSASS NO-SMC
Refer to the following report produced by the ACF2 Data Collection: - ACF2CMDS.RPT(ATTSTC) Verify that the logonid(s) for the BMC IOA started task(s) is (are) properly defined. If the following attributes are defined, this is not a finding. STC MUSASS NO-SMC
Fix:
The IAO working with the systems programmer will ensure the BMC IOA Started Task(s) is (are) properly identified and/or defined to the System ACP. If the product requires a Started Task, verify that it is properly defined to the System ACP with the proper attributes. Most installation manuals will indicate how the Started Task is identified and any additional attributes that must be specified. The following commands are provided as a sample for defining Started Task(s): SET LID CHANGE IOAGATE STC MUSASS NO-SMC
The IAO working with the systems programmer will ensure the BMC IOA Started Task(s) is (are) properly identified and/or defined to the System ACP. If the product requires a Started Task, verify that it is properly defined to the System ACP with the proper attributes. Most installation manuals will indicate how the Started Task is identified and any additional attributes that must be specified. The following commands are provided as a sample for defining Started Task(s): SET LID CHANGE IOAGATE STC MUSASS NO-SMC
Vuln ID:
V-17947
Rule ID:
SV-32064r2_rule
Group ID:
ZB000020
Version:
ZIOAA020
CCI:
Severity:
Medium
Description:
BMC IOA can run with sensitive system privileges, and potentially can circumvent system controls. Failure to properly control access to product resources could result in the compromise of the operating system environment, and compromise the confidentiality of customer data. Many utilities assign resource controls that can be granted to system programmers only in greater than read authority. Resources are also granted to certain non systems personnel with read only authority.Information Assurance OfficerSystems ProgrammerECCD-1, ECCD-2
BMC IOA can run with sensitive system privileges, and potentially can circumvent system controls. Failure to properly control access to product resources could result in the compromise of the operating system environment, and compromise the confidentiality of customer data. Many utilities assign resource controls that can be granted to system programmers only in greater than read authority. Resources are also granted to certain non systems personnel with read only authority.Information Assurance OfficerSystems Programmer
Check:
Refer to the following report produced by the ACF2 Data Collection and Data Set and Resource Data Collection: - SENSITVE.RPT(ZIOA0020) - ACF2CMDS.RPT(RESOURCE) – Alternate report Automated Analysis Refer to the following report produced by the Data Set and Resource Data Collection: - PDI(ZIOA0020) Verify that the accesses to resources and/or generic equivalent are properly restricted according to the requirements specified in BMC IOA Resources table in the z/OS STIG Addendum. If the following guidance is true, this is not a finding. Note: To determine what resource class is used review the IOACLASS setting in SECPARM. ___ The ACF2 resources are defined with a default access of PREVENT. ___ The ACF2 resource access authorizations restrict access to the appropriate personnel. ___ The ACF2 resource logging requirements are specified.
Refer to the following report produced by the ACF2 Data Collection and Data Set and Resource Data Collection: - SENSITVE.RPT(ZIOA0020) - ACF2CMDS.RPT(RESOURCE) – Alternate report Automated Analysis Refer to the following report produced by the Data Set and Resource Data Collection: - PDI(ZIOA0020) Verify that the accesses to resources and/or generic equivalent are properly restricted according to the requirements specified in BMC IOA Resources table in the z/OS STIG Addendum. If the following guidance is true, this is not a finding. Note: To determine what resource class is used review the IOACLASS setting in SECPARM. The "Trigger" resources i.e., $$SECxxx (xxx is unique to the product) are defined in the FACILITY resource class ___ The ACF2 resources are defined with a default access of PREVENT. ___ The ACF2 resource access authorizations restrict access to the appropriate personnel. ___ The ACF2 resource logging requirements are specified.
Fix:
The IAO will work with the systems programmer to verify that the following are properly specified in the ACP. Note: To determine what resource class is used review the IOACLASS setting in SECPARM. (Note: The resource class, resources, and/or resource prefixes identified below are examples of a possible installation. The actual resource class, resources, and/or resource prefixes are determined when the product is actually installed on a system through the product’s installation guide and can be site specific.) Use BMC IOA Resources and BMC INCONTROL Resources Descriptions tables in the zOS STIG Addendum. These tables list the resources, descriptions, and access and logging requirements. Ensure the guidelines for the resources and/or generic equivalent specified in the z/OS STIG Addendum are followed. The following commands are provided as a sample for implementing resource controls: $key($$addcnd) type(ioa) - uid(<autoaudt>) allow - uid(<operaudt>) allow - uid(<pcspaudt>) allow - uid(<prodaudt>) allow - uid(<syspaudt>) allow - uid(*) prevent
The IAO will work with the systems programmer to verify that the following are properly specified in the ACP. Note: To determine what resource class is used review the IOACLASS setting in SECPARM. The "Trigger" resources i.e., $$SECxxx (xxx is unique to the product) are defined in the FACILITY resource class (Note: The resource class, resources, and/or resource prefixes identified below are examples of a possible installation. The actual resource class, resources, and/or resource prefixes are determined when the product is actually installed on a system through the product’s installation guide and can be site specific.) Use BMC IOA Resources and BMC INCONTROL Resources Descriptions tables in the zOS STIG Addendum. These tables list the resources, descriptions, and access and logging requirements. Ensure the guidelines for the resources and/or generic equivalent specified in the z/OS STIG Addendum are followed. The following commands are provided as a sample for implementing resource controls: $key($$addcnd) type(ioa) - uid(<autoaudt>) allow - uid(<operaudt>) allow - uid(<pcspaudt>) allow - uid(<prodaudt>) allow - uid(<syspaudt>) allow - uid(*) prevent
Vuln ID:
V-17985
Rule ID:
SV-32018r1_rule
Group ID:
ZB000060
Version:
ZIOA0060
CCI:
Severity:
Medium
Description:
The BMC IOA security exits enable access authorization checking to BMC IOA commands, features, and online functionality. If these exit(s) is (are) not in place, activities by unauthorized users may result. BMC IOA security exit(s) interface with the ACP. If an unauthorized exit was introduced into the operating environment, system security could be weakened or bypassed. These exposures may result in the compromise of the operating system environment, ACP, and customer data.Information Assurance OfficerSystems ProgrammerDCCS-1, DCCS-2, ECSD-1, ECSD-2
The BMC IOA security exits enable access authorization checking to BMC IOA commands, features, and online functionality. If these exit(s) is (are) not in place, activities by unauthorized users may result. BMC IOA security exit(s) interface with the ACP. If an unauthorized exit was introduced into the operating environment, system security could be weakened or bypassed. These exposures may result in the compromise of the operating system environment, ACP, and customer data.Information Assurance OfficerSystems Programmer
Check:
Interview the systems programmer responsible for the BMC IOA. Determine if the site has modified the following security exit(s): IOASE06 IOASE07 IOASE09 IOASE12 IOASE16 IOASE32 IOASE40 IOASE42 Ensure the above security exit(s) has (have) not been modified. If the above security exit(s) has (have) been modified, ensure that the security exit(s) has (have) been approved by the site systems programmer and the approval is on file for examination.
Interview the systems programmer responsible for the BMC IOA. Determine if the site has modified the following security exit(s): IOASE06 IOASE07 IOASE09 IOASE12 IOASE16 IOASE32 IOASE40 IOASE42 Ensure the above security exit(s) has (have) not been modified. If the above security exit(s) has (have) been modified, ensure that the security exit(s) has (have) been approved by the site systems programmer and the approval is on file for examination.
Fix:
The System programmer responsible for the BMC IOA will review the BMC IOA operating environment. Ensure that the following security exit(s) is (are) installed properly. Determine if the site has modified the following security exit(s): IOASE06 IOASE07 IOASE09 IOASE12 IOASE16 IOASE32 IOASE40 IOASE42 Ensure that the security exit(s) has (have) not been modified. If the security exit(s) has (have) been modified, ensure the security exit(s) has (have) been checked as to not violate any security integrity within the system and approval documentation is on file.
The System programmer responsible for the BMC IOA will review the BMC IOA operating environment. Ensure that the following security exit(s) is (are) installed properly. Determine if the site has modified the following security exit(s): IOASE06 IOASE07 IOASE09 IOASE12 IOASE16 IOASE32 IOASE40 IOASE42 Ensure that the security exit(s) has (have) not been modified. If the security exit(s) has (have) been modified, ensure the security exit(s) has (have) been checked as to not violate any security integrity within the system and approval documentation is on file.
Vuln ID:
V-18014
Rule ID:
SV-31958r1_rule
Group ID:
ZB000040
Version:
ZIOAA040
CCI:
Severity:
Medium
Description:
BMC IOA configuration/parameters control the security and operational characteristics of products. If these parameter values are improperly specified, security and operational controls may be weakened. This exposure may threaten the availability of the product applications, and compromise the confidentiality of customer data.Systems ProgrammerECCD-1, ECCD-2
BMC IOA configuration/parameters control the security and operational characteristics of products. If these parameter values are improperly specified, security and operational controls may be weakened. This exposure may threaten the availability of the product applications, and compromise the confidentiality of customer data.Systems Programmer
Check:
Refer to the following applicable reports produced by the z/OS Data Collection: - IOA.RPT(SECPARM) Automated Analysis Refer to the following report produced by the z/OS Data Collection: - PDI(ZIOA0040) The following keywords will have the specified values in the BMC IOA security parameter member: Keyword Value DEFMCHKI $$IOAEDM SECTOLI NO DFMI06 EXTEND DFMI07 EXTEND DFMI09 EXTEND DFMI12 EXTEND DFMI16 EXTEND DFMI32 EXTEND DFMI40 EXTEND DFMI42 EXTEND IOACLASS IOAFAC SAFSCLAS SURROGAT IOATCBS YES
Refer to the following applicable reports produced by the z/OS Data Collection: - IOA.RPT(SECPARM) Automated Analysis Refer to the following report produced by the z/OS Data Collection: - PDI(ZIOA0040) The following keywords will have the specified values in the BMC IOA security parameter member: Keyword Value DEFMCHKI $$IOAEDM SECTOLI NO DFMI06 EXTEND DFMI07 EXTEND DFMI09 EXTEND DFMI12 EXTEND DFMI16 EXTEND DFMI32 EXTEND DFMI40 EXTEND DFMI42 EXTEND IOACLASS IOAFAC SAFSCLAS SURROGAT IOATCBS YES
Fix:
The BMC IOA Systems programmer will verify that any configuration/parameters that are required to control the security of the product are properly configured and syntactically correct. Set the standard values for the BMC IOA security parameters for the specific ACP environment along with additional IOA security parameters with standard values as documented below. Keyword Value DEFMCHKI $$IOAEDM SECTOLI NO DFMI06 EXTEND DFMI07 EXTEND DFMI09 EXTEND DFMI12 EXTEND DFMI16 EXTEND DFMI32 EXTEND DFMI40 EXTEND DFMI42 EXTEND IOACLASS IOAFAC SAFSCLAS SURROGAT IOATCBS YES
The BMC IOA Systems programmer will verify that any configuration/parameters that are required to control the security of the product are properly configured and syntactically correct. Set the standard values for the BMC IOA security parameters for the specific ACP environment along with additional IOA security parameters with standard values as documented below. Keyword Value DEFMCHKI $$IOAEDM SECTOLI NO DFMI06 EXTEND DFMI07 EXTEND DFMI09 EXTEND DFMI12 EXTEND DFMI16 EXTEND DFMI32 EXTEND DFMI40 EXTEND DFMI42 EXTEND IOACLASS IOAFAC SAFSCLAS SURROGAT IOATCBS YES
Vuln ID:
V-21592
Rule ID:
SV-32152r2_rule
Group ID:
ZB000002
Version:
ZIOAA002
CCI:
Severity:
Medium
Description:
BMC IOA User data sets, IOA Core and Repository, have the ability to use privileged functions and/or have access to sensitive data. Failure to properly restrict access to these data sets could result in violating the integrity of the base product which could result in compromising the operating system or sensitive data.Information Assurance OfficerSystems ProgrammerDCSL-1, ECAR-1, ECAR-2, ECCD-1, ECCD-2
BMC IOA User data sets, IOA Core and Repository, have the ability to use privileged functions and/or have access to sensitive data. Failure to properly restrict access to these data sets could result in violating the integrity of the base product which could result in compromising the operating system or sensitive data.Information Assurance OfficerSystems Programmer
Check:
Refer to the following report produced by the Data Set and Resource Data Collection: - SENSITVE.RPT(IOAUSER) Automated Analysis Refer to the following report produced by the Data Set and Resource Data Collection: - PDI(ZIOA0002) Verify that the accesses to the BMC IOA User data sets are properly restricted. If the following guidance is true, this is not a finding. ___ The ACF2 data set access authorizations restricts READ access to auditors. ___ The ACF2 data set access authorizations restricts WRITE and/or greater access to systems programming personnel. ___ The ACF2 data set access authorizations restricts WRITE and/or greater access to the BMC STCs and/or batch users. ___ The ACF2 data set access authorizations restricts UPDATE access to production control and scheduling personnel and the BMC users.
Refer to the following report produced by the Data Set and Resource Data Collection: - SENSITVE.RPT(IOAUSER) Automated Analysis Refer to the following report produced by the Data Set and Resource Data Collection: - PDI(ZIOA0002) Verify that the accesses to the BMC IOA User data sets are properly restricted. If the following guidance is true, this is not a finding. ___ The ACF2 data set access authorizations restricts READ access to auditors. ___ The ACF2 data set access authorizations restricts WRITE and/or greater access to systems programming personnel. ___ The ACF2 data set access authorizations restricts WRITE and/or greater access to the BMC STCs and/or batch users. ___ The ACF2 data set access authorizations restricts UPDATE access to production control and scheduling personnel and the BMC users.
Fix:
The IAO will ensure that WRITE and/or greater access to BMC IOA User data sets are limited to System Programmers and/or BMC STCs and/or batch users only. UPDATE access can be given to production control and scheduling personnel and the BMC users. READ access can be given to auditors. The installing Systems Programmer will identify and document the product data sets and categorize them according to who will have update and alter access and if required that all update and allocate access is logged. He will identify if any additional groups have update and/or alter access for specific data sets, and once documented he will work with the IAO to see that they are properly restricted to the ACP (Access Control Program) active on the system. (Note: The data sets and/or data set prefixes identified below are examples of a possible installation. The actual data sets and/or prefixes are determined when the product is actually installed on a system through the product’s installation guide and can be site specific.) Data sets to be protected will be: SYS3.IOA.*.IOAC. The following commands are provided as a sample for implementing data set controls: $KEY(SYS3) IOA.-.IOAC.- UID(<syspaudt>) R(A) W(A) A(A) E(A) IOA.-.IOAC.- UID(<tstcaudt>) R(A) W(A) A(A) E(A) IOA.-.IOAC.- UID(BMC STCs) R(A) W(A) A(A) E(A) IOA.-.IOAC.- UID(<bmcuser>) R(A) W(A) E(A) IOA.-.IOAC.- UID(<pcspaudt>) R(A) W(A) E(A) IOA.-.IOAC.- UID(<audtaudt>) R(A) E(A)
The IAO will ensure that WRITE and/or greater access to BMC IOA User data sets are limited to System Programmers and/or BMC STCs and/or batch users only. UPDATE access can be given to production control and scheduling personnel and the BMC users. READ access can be given to auditors. The installing Systems Programmer will identify and document the product data sets and categorize them according to who will have update and alter access and if required that all update and allocate access is logged. He will identify if any additional groups have update and/or alter access for specific data sets, and once documented he will work with the IAO to see that they are properly restricted to the ACP (Access Control Program) active on the system. (Note: The data sets and/or data set prefixes identified below are examples of a possible installation. The actual data sets and/or prefixes are determined when the product is actually installed on a system through the product’s installation guide and can be site specific.) Data sets to be protected will be: SYS3.IOA.*.IOAC. The following commands are provided as a sample for implementing data set controls: $KEY(SYS3) IOA.-.IOAC.- UID(<syspaudt>) R(A) W(A) A(A) E(A) IOA.-.IOAC.- UID(<tstcaudt>) R(A) W(A) A(A) E(A) IOA.-.IOAC.- UID(BMC STCs) R(A) W(A) A(A) E(A) IOA.-.IOAC.- UID(<bmcuser>) R(A) W(A) E(A) IOA.-.IOAC.- UID(<pcspaudt>) R(A) W(A) E(A) IOA.-.IOAC.- UID(<audtaudt>) R(A) E(A)