Microsoft Internet Explorer 11 Security Technical Implementation Guide

U_MS_IE11_STIG_V1R16_Manual-xccdf.xml

Version/Release Published Filters Downloads Update
V1R16 2018-06-08      
Update existing CKLs to this version of the STIG
The Microsoft Internet Explorer 11 Security Technical Implementation Guide (STIG) is published as a tool to improve the security of Department of Defense (DoD) information systems. Comments or proposed revisions to this document should be sent via e-mail to the following address: [email protected]
Vuln Rule Version CCI Severity Title Description
SV-59337r8_rule DTBI014-IE11 CCI-002450 MEDIUM Turn off Encryption Support must be enabled. This parameter ensures only DoD-approved ciphers and algorithms are enabled for use by the web browser by allowing you to turn on/off support for TLS and SSL. TLS is a protocol for protecting communications between the browser and the target server. When the browser attempts to set up a protected communication with the target server, the browser and server negotiate which protocol and version to use. The browser and server attempt to match each other's list of supported protocols and versions and pick the most preferred match..
SV-59339r1_rule DTBI015-IE11 CCI-001274 MEDIUM The Internet Explorer warning about certificate address mismatch must be enforced. This parameter warns users if the certificate being presented by the website is invalid. Since server certificates are used to validate the identity of the web server it is critical to warn the user of a potential issue with the certificate being presented by the web server. This setting aids to prevent spoofing attacks.ECSC-1
SV-59341r4_rule DTBI018-IE11 CCI-000185 LOW Check for publishers certificate revocation must be enforced. Check for publisher's certificate revocation options should be enforced to ensure all PKI signed objects are validated.
SV-59345r1_rule DTBI022-IE11 CCI-001169 MEDIUM The Download signed ActiveX controls property must be disallowed (Internet zone). Active X controls can contain potentially malicious code and must only be allowed to be downloaded from trusted sites. Signed code is better than unsigned code in that it may be easier to determine its author, but it is still potentially harmful, especially when coming from an untrusted zone. This policy setting allows you to manage whether users may download signed ActiveX controls from a page in the zone. If you enable this policy, users can download signed controls without user intervention. If you select Prompt in the drop-down box, users are queried whether to download controls signed by untrusted publishers. Code signed by trusted publishers is silently downloaded. If you disable the policy setting, signed controls cannot be downloaded.DCMC-1
SV-59347r1_rule DTBI023-IE11 CCI-001169 MEDIUM The Download unsigned ActiveX controls property must be disallowed (Internet zone). Unsigned code is potentially harmful, especially when coming from an untrusted zone. This policy setting allows you to manage whether users may download unsigned ActiveX controls from the zone. If you enable this policy setting, users can run unsigned controls without user intervention. If you select "Prompt" in the drop-down box, users are queried to choose whether to allow the unsigned control to run. If you disable this policy setting, users cannot run unsigned controls. If you do not configure this policy setting, users cannot run unsigned controls.DCMC-1
SV-59365r1_rule DTBI024-IE11 CCI-001170 MEDIUM The Initialize and script ActiveX controls not marked as safe property must be disallowed (Internet zone). ActiveX controls that are not marked safe for scripting should not be executed. Although this is not a complete security measure for a control to be marked safe for scripting, if a control is not marked safe, it should not be initialized and executed. This setting causes both unsafe and safe controls to be initialized and scripted, ignoring the Script ActiveX controls marked safe for scripting option. This increases the risk of malicious code being loaded and executed by the browser. If you enable this policy setting, ActiveX controls are run, loaded with parameters and scripted without setting object safety for untrusted data or scripts. If you disable this policy setting, ActiveX controls that cannot be made safe are not loaded with parameters or scripted. This setting is not recommended, except for secure and administered zones.DCMC-1
SV-59369r1_rule DTBI030-IE11 CCI-000381 MEDIUM Font downloads must be disallowed (Internet zone). Downloads of fonts can sometimes contain malicious code. It is possible that a font could include malformed data that would cause Internet Explorer to crash when it attempts to load and render the font. This policy setting allows you to manage whether pages of the zone may download HTML fonts. If you enable this policy setting, HTML fonts can be downloaded automatically. If you enable this policy setting and "Prompt" is selected in the drop-down box, users are queried whether to allow HTML fonts to download. If you disable this policy setting, HTML fonts are prevented from downloading.DCMC-1
SV-59371r1_rule DTBI031-IE11 CCI-000381 MEDIUM The Java permissions must be disallowed (Internet zone). Java applications could contain malicious code; sites located in this security zone are more likely to be hosted by malicious individuals. This policy setting allows you to manage permissions for Java applets. If you enable this policy setting, options can be chosen from the drop-down box. Use of the Custom permission will control permissions settings individually. Use of the Low Safety permission enables applets to perform all operations. Use of the Medium Safety permission enables applets to run in their sandbox (an area in memory outside of which the program cannot make calls), plus adds capabilities like scratch space (a safe and secure storage area on the client computer) and a user-controlled file I/O. Use of the High Safety permission enables applets to run in their sandbox. If you disable this policy setting, Java applets cannot run. If you do not configure this policy setting, the permission is set to High Safety.DCMC-1
SV-59373r1_rule DTBI032-IE11 CCI-001414 MEDIUM Accessing data sources across domains must be disallowed (Internet zone). The ability to access data zones across domains could cause the user to unknowingly access content hosted on an unauthorized server. Access to data sources across multiple domains must be controlled based upon the site being browsed. This policy setting allows you to manage whether Internet Explorer can access data from another security zone using the Microsoft XML Parser (MSXML) or ActiveX Data Objects (ADO).DCMC-1
SV-59375r1_rule DTBI036-IE11 CCI-000381 MEDIUM Functionality to drag and drop or copy and paste files must be disallowed (Internet zone). Content hosted on sites located in the Internet zone are likely to contain malicious payloads and therefore this feature should be blocked for this zone. Drag and drop or copy and paste files must have a level of protection based upon the site being accessed.ECSC-1
SV-59377r1_rule DTBI038-IE11 CCI-000381 MEDIUM Launching programs and files in IFRAME must be disallowed (Internet zone). This policy setting allows you to manage whether applications may be run and files may be downloaded from an IFRAME reference in the HTML of the pages in this zone. Launching of programs in IFRAME must have a level of protection based upon the site being accessed. If you enable this policy setting, applications can run and files can be downloaded from IFRAMEs on the pages in this zone without user intervention. If you disable this setting, users are prevented from running applications and downloading files from IFRAMEs on the pages in this zone.DCMC-1
SV-59379r1_rule DTBI039-IE11 CCI-001414 MEDIUM Navigating windows and frames across different domains must be disallowed (Internet zone). Frames that navigate across different domains are a security concern, because the user may think they are accessing pages on one site while they are actually accessing pages on another site. It is possible that a website hosting malicious content could use this feature in a manner similar to cross-site scripting (XSS). This policy setting allows you to manage the opening of sub-frames and access of applications across different domains.ECSC-1
SV-59381r1_rule DTBI042-IE11 CCI-001199 MEDIUM Userdata persistence must be disallowed (Internet zone). Userdata persistence must have a level of protection based upon the site being accessed. It is possible for sites hosting malicious content to exploit this feature as part of an attack against visitors browsing the site. This policy setting allows you to manage the preservation of information in the browser's history, in Favorites, in an XML store, or directly within a web page saved to disk. When a user returns to a persisted page, the state of the page can be restored if this policy setting is not appropriately configured. ECSC-1
SV-59385r1_rule DTBI044-IE11 CCI-000381 MEDIUM Clipboard operations via script must be disallowed (Internet zone). A malicious script could use the clipboard in an undesirable manner, for example, if the user had recently copied confidential information to the clipboard while editing a document, a malicious script could harvest that information. It might be possible to exploit other vulnerabilities in order to send the harvested data to the attacker. Allow paste operations via script must have a level of protection based upon the site being accessed.ECSC-1
SV-59387r1_rule DTBI046-IE11 CCI-001184 MEDIUM Logon options must be configured to prompt (Internet zone). Users could submit credentials to servers operated by malicious individuals who could then attempt to connect to legitimate servers with those captured credentials. Care must be taken with user credentials, automatic logon performance, and how default Windows credentials are passed to the websites. This policy setting allows management of settings for logon options. If you enable this policy setting, you can choose from varying logon options. “Anonymous logon” disables HTTP authentication and uses the guest account only for the Common Internet File System (CIFS) protocol. “Prompt for user name and password” queries users for user IDs and passwords. After a user is queried, these values can be used silently for the remainder of the session. “Automatic logon only in Intranet zone” queries users for user IDs and passwords in other zones. After a user is queried, these values can be used silently for the remainder of the session. “Automatic logon with current user name and password” attempts logon using Windows NT Challenge Response. If Windows NT Challenge Response is supported by the server, the logon uses the user's network user name and password for login. If Windows NT Challenge Response is not supported by the server, the user is queried to provide the user name and password. If you disable this policy setting, logon is set to “Automatic logon only in Intranet zone”. If you do not configure this policy setting, logon is set to “Automatic logon only in Intranet zone”. The most secure option is to configure this setting to “Enabled”; “Anonymous logon”, but configuring this setting to “Enabled”; “Prompt for user name and password”, provides a reasonable balance between security and usability.ECSC-1
SV-59389r1_rule DTBI061-IE11 CCI-000381 MEDIUM Java permissions must be configured with High Safety (Intranet zone). Java applications could contain malicious code. This policy setting allows you to manage permissions for Java applets. If you enable this policy setting, options can be chosen from the drop-down box. Use of the Custom permission will control permissions settings individually. Use of the Low Safety permission enables applets to perform all operations. Use of the Medium Safety permission enables applets to run in their sandbox (an area in memory outside of which the program cannot make calls), plus adds capabilities like scratch space (a safe and secure storage area on the client computer) and a user-controlled file I/O. Use of the High Safety permission enables applets to run in their sandbox. If you disable this policy setting, Java applets cannot run. If you do not configure this policy setting, the permission is set to High Safety.DCMC-1
SV-59407r1_rule DTBI091-IE11 CCI-000381 MEDIUM Java permissions must be configured with High Safety (Trusted Sites zone). Java applications could contain malicious code. This policy setting allows you to manage permissions for Java applets. If you enable this policy setting, options can be chosen from the drop-down box. Use of the Custom permission will control permissions settings individually. Use of the Low Safety permission enables applets to perform all operations. Use of the Medium Safety permission enables applets to run in their sandbox (an area in memory outside of which the program cannot make calls), plus adds capabilities like scratch space (a safe and secure storage area on the client computer) and a user-controlled file I/O. Use of the High Safety permission enables applets to run in their sandbox. If you disable this policy setting, Java applets cannot run. If you do not configure this policy setting, the permission is set to High SafetyDCMC-1
SV-59409r1_rule DTBI1000-IE11 CCI-001414 MEDIUM Dragging of content from different domains within a window must be disallowed (Internet zone). This policy setting allows you to set options for dragging content from one domain to a different domain when the source and destination are in the same window. If you enable this policy setting, users can drag content from one domain to a different domain when the source and destination are in the same window. Users cannot change this setting. If you disable this policy setting, users cannot drag content from one domain to a different domain when the source and destination are in the same window. Users cannot change this setting in the Internet Options dialog box. If you do not configure this policy setting, users cannot drag content from one domain to a different domain when the source and destination are in the same window. Users can change this setting in the Internet Options dialog box.ECSC-1
SV-59411r1_rule DTBI1005-IE11 CCI-001414 MEDIUM Dragging of content from different domains across windows must be disallowed (Restricted Sites zone). This policy setting allows you to set options for dragging content from one domain to a different domain when the source and destination are in different windows. If you enable this policy setting, users can drag content from one domain to a different domain when the source and destination are in different windows. Users cannot change this setting. If you enable this policy setting, users cannot drag content from one domain to a different domain when both the source and destination are in different windows. Users cannot change this setting. If you do not configure this policy setting, users cannot drag content from one domain to a different domain when the source and destination are in different windows. Users can change this setting in the Internet Options dialog box.ECSC-1
SV-59413r1_rule DTBI1010-IE11 CCI-001695 MEDIUM Internet Explorer Processes Restrict ActiveX Install must be enforced (Explorer). Users often choose to install software such as ActiveX controls that are not permitted by their organization's security policy. Such software can pose significant security and privacy risks to networks. This policy setting enables blocking of ActiveX control installation prompts for Internet Explorer processes. If you enable this policy setting, prompts for ActiveX control installations will be blocked for Internet Explorer processes. If you disable this policy setting, prompts for ActiveX control installations will not be blocked and these prompts will be displayed to users. If you do not configure this policy setting, the user's preference will be used to determine whether to block ActiveX control installations for Internet Explorer processes.ECSC-1
SV-59417r1_rule DTBI1020-IE11 CCI-001695 MEDIUM Internet Explorer Processes Restrict ActiveX Install must be enforced (iexplore). Users often choose to install software such as ActiveX controls that are not permitted by their organization's security policy. Such software can pose significant security and privacy risks to networks. This policy setting enables blocking of ActiveX control installation prompts for Internet Explorer processes. If you enable this policy setting, prompts for ActiveX control installations will be blocked for Internet Explorer processes. If you disable this policy setting, prompts for ActiveX control installations will not be blocked and these prompts will be displayed to users. If you do not configure this policy setting, the user's preference will be used to determine whether to block ActiveX control installations for Internet Explorer processes.ECSC-1
SV-59419r1_rule DTBI1025-IE11 CCI-001414 MEDIUM Dragging of content from different domains within a window must be disallowed (Restricted Sites zone). This policy setting allows you to set options for dragging content from one domain to a different domain when the source and destination are in the same window. If you enable this policy setting, users can drag content from one domain to a different domain when the source and destination are in the same window. Users cannot change this setting. If you disable this policy setting, users cannot drag content from one domain to a different domain when the source and destination are in the same window. Users cannot change this setting in the Internet Options dialog box. If you do not configure this policy setting, users cannot drag content from one domain to a different domain when the source and destination are in the same window. Users can change this setting in the Internet Options dialog box.ECSC-1
SV-59437r1_rule DTBI112-IE11 CCI-001169 MEDIUM The Download signed ActiveX controls property must be disallowed (Restricted Sites zone). ActiveX controls can contain potentially malicious code and must only be allowed to be downloaded from trusted sites. Signed code is better than unsigned code in that it may be easier to determine its author, but it is still potentially harmful, especially when coming from an untrusted zone.DCMC-1
SV-59439r1_rule DTBI113-IE11 CCI-001169 MEDIUM The Download unsigned ActiveX controls property must be disallowed (Restricted Sites zone). Unsigned code is potentially harmful, especially when coming from an untrusted zone. ActiveX controls can contain potentially malicious code and must only be allowed to be downloaded from trusted sites. They must also be digitally signed.DCMC-1
SV-59441r1_rule DTBI114-IE11 CCI-001170 MEDIUM The Initialize and script ActiveX controls not marked as safe property must be disallowed (Restricted Sites zone). ActiveX controls not marked safe for scripting should not be executed. Although this is not a complete security measure for a control to be marked safe for scripting, if a control is not marked safe, it should not be initialized and executed.DCMC-1
SV-59443r1_rule DTBI115-IE11 CCI-001687 MEDIUM ActiveX controls and plug-ins must be disallowed (Restricted Sites zone). This policy setting allows you to manage whether ActiveX controls and plug-ins can be run on pages from the specified zone. ActiveX controls not marked as safe should not be executed. If you enable this policy setting, controls and plug-ins can run without user intervention. If you disable this policy setting, controls and plug-ins are prevented from running.DCMC-1
SV-59445r1_rule DTBI116-IE11 CCI-001170 MEDIUM ActiveX controls marked safe for scripting must be disallowed (Restricted Sites zone). This policy setting allows management of whether ActiveX controls marked safe for scripting can interact with a script. If you enable this policy setting, script interaction can occur automatically without user intervention. ActiveX controls not marked as safe for scripting should not be executed. Although this is not a complete security measure for a control to be marked safe for scripting, if a control is not marked safe, it should not be initialized and executed.DCMC-1
SV-59447r1_rule DTBI119-IE11 CCI-000381 MEDIUM File downloads must be disallowed (Restricted Sites zone). Sites located in the Restricted Sites Zone are more likely to contain malicious payloads and therefore downloads from this zone should be blocked. Files should not be able to be downloaded from sites that are considered restricted. This policy setting allows you to manage whether file downloads are permitted from the zone. This option is determined by the zone of the page with the link causing the download, not the zone from which the file is delivered.DCMC-1
SV-59449r1_rule DTBI120-IE11 CCI-000381 MEDIUM Font downloads must be disallowed (Restricted Sites zone). It is possible that a font could include malformed data that would cause Internet Explorer to crash when it attempts to load and render the font. Downloads of fonts can sometimes contain malicious code. Files should not be downloaded from restricted sites. This policy setting allows you to manage whether pages of the zone may download HTML fonts.DCMC-1
SV-59451r1_rule DTBI121-IE11 CCI-000381 MEDIUM Java permissions must be disallowed (Restricted Sites zone). Java applications could contain malicious code; sites located in this security zone are more likely to be hosted by malicious individuals. This policy setting allows you to manage permissions for Java applets. If you enable this policy setting, options can be chosen from the drop-down box. Use of the Custom permission will control permissions settings individually. Use of the Low Safety permission enables applets to perform all operations. Use of the Medium Safety permission enables applets to run in their sandbox (an area in memory outside of which the program cannot make calls), plus adds capabilities like scratch space (a safe and secure storage area on the client computer) and a user-controlled file I/O. Use of the High Safety permission enables applets to run in their sandbox. If you disable this policy setting, Java applets cannot run. If you do not configure this policy setting, the permission is set to High Safety.DCMC-1
SV-59453r1_rule DTBI122-IE11 CCI-001414 MEDIUM Accessing data sources across domains must be disallowed (Restricted Sites zone). The ability to access data zones across domains could cause the user to unknowingly access content hosted on an unauthorized server. This policy setting allows you to manage whether Internet Explorer can access data from another security zone using the Microsoft XML Parser (MSXML) or ActiveX Data Objects (ADO).DCMC-1
SV-59455r1_rule DTBI123-IE11 CCI-000366 MEDIUM The Allow META REFRESH property must be disallowed (Restricted Sites zone). It is possible that users will unknowingly be redirected to a site hosting malicious content. 'Allow META REFRESH' must have a level of protection based upon the site being browsed. This policy setting allows you to manage whether a user's browser can be redirected to another web page if the author of the web page uses the Meta Refresh setting to redirect browsers to another web page.DCMC-1
SV-59457r1_rule DTBI126-IE11 CCI-000381 MEDIUM Functionality to drag and drop or copy and paste files must be disallowed (Restricted Sites zone). Content hosted on sites located in the Restricted Sites zone are more likely to contain malicious payloads and therefore this feature should be blocked for this zone. Drag and drop or copy and paste files must have a level of protection based upon the site being accessed.ECSC-1
SV-59461r1_rule DTBI128-IE11 CCI-000381 MEDIUM Launching programs and files in IFRAME must be disallowed (Restricted Sites zone). This policy setting allows you to manage whether applications may be run and files may be downloaded from an IFRAME reference in the HTML of the pages in this zone. Launching of programs in IFRAME must have a level of protection based upon the site being accessed. If you enable this policy setting, applications can run and files can be downloaded from IFRAMEs on the pages in this zone without user intervention. If you disable this setting, users are prevented from running applications and downloading files from IFRAMEs on the pages in this zone.DCMC-1
SV-59463r1_rule DTBI129-IE11 CCI-001414 MEDIUM Navigating windows and frames across different domains must be disallowed (Restricted Sites zone). Frames navigating across different domains are a security concern, because the user may think they are accessing pages on one site while they are actually accessing pages on another site. It is possible that a website hosting malicious content could use this feature in a manner similar to cross-site scripting (XSS). This policy setting allows you to manage the opening of sub-frames and access of applications across different domains.ECSC-1
SV-59465r1_rule DTBI132-IE11 CCI-001199 MEDIUM Userdata persistence must be disallowed (Restricted Sites zone). Userdata persistence must have a level of protection based upon the site being accessed. This policy setting allows you to manage the preservation of information in the browser's history, in Favorites, in an XML store, or directly within a web page saved to disk. When a user returns to a persisted page, the state of the page can be restored if this policy setting is not appropriately configured.ECSC-1
SV-59467r1_rule DTBI133-IE11 CCI-000381 MEDIUM Active scripting must be disallowed (Restricted Sites Zone). Active scripts hosted on sites located in this zone are more likely to contain malicious code. Active scripting must have a level of protection based upon the site being accessed. This policy setting allows you to manage whether script code on pages in the zone are run.DCMC-1
SV-59469r1_rule DTBI134-IE11 CCI-000381 MEDIUM Clipboard operations via script must be disallowed (Restricted Sites zone). A malicious script could use the clipboard in an undesirable manner, for example, if the user had recently copied confidential information to the clipboard while editing a document, a malicious script could harvest that information. It might be possible to exploit other vulnerabilities in order to send the harvested data to the attacker. Allow paste operations via script must have a level of protection based upon the site being accessed.ECSC-1
SV-59471r1_rule DTBI136-IE11 CCI-001184 MEDIUM Logon options must be configured and enforced (Restricted Sites zone). Users could submit credentials to servers operated by malicious individuals who could then attempt to connect to legitimate servers with those captured credentials. Care must be taken with user credentials, automatic logon performance, and how default Windows credentials are passed to the websites. This policy setting allows management of settings for logon options. If you enable this policy setting, you can choose from varying logon options. “Anonymous logon” disables HTTP authentication and uses the guest account only for the Common Internet File System (CIFS) protocol. “Prompt for user name and password” queries users for user IDs and passwords. After a user is queried, these values can be used silently for the remainder of the session. “Automatic logon only in Intranet zone” queries users for user IDs and passwords in other zones. After a user is queried, these values can be used silently for the remainder of the session. “Automatic logon with current user name and password” attempts logon using Windows NT Challenge Response. If Windows NT Challenge Response is supported by the server, the logon uses the user's network user name and password for login. If Windows NT Challenge Response is not supported by the server, the user is queried to provide the user name and password. If you disable this policy setting, logon is set to “Automatic logon only in Intranet zone”. If you do not configure this policy setting, logon is set to “Automatic logon only in Intranet zone”. The most secure option is to configure this setting to “Enabled”; “Anonymous logon”. This will prevent users from submitting credentials to servers in this security zone.ECSC-1
SV-59473r1_rule DTBI300-IE11 CCI-000169 MEDIUM Configuring History setting must be set to 40 days. This setting specifies the number of days that Internet Explorer keeps track of the pages viewed in the History List. The delete Browsing History option can be accessed using Tools, Internet Options, "General" tab, and then click Settings under Browsing History. If you enable this policy setting, a user cannot set the number of days that Internet Explorer keeps track of the pages viewed in the History List. The number of days that Internet Explorer keeps track of the pages viewed in the History List must be specified. Users will not be able to delete browsing history. If you disable or do not configure this policy setting, a user can set the number of days that Internet Explorer tracks views of pages in the History List. Users can delete browsing history.ECSC-1
SV-59479r1_rule DTBI318-IE11 CCI-000381 MEDIUM Internet Explorer must be set to disallow users to add/delete sites. This setting prevents users from adding sites to various security zones. Users should not be able to add sites to different zones, as this could allow them to bypass security controls of the system. If you do not configure this policy setting, users will be able to add or remove sites from the Trusted Sites and Restricted Sites zones at will and change settings in the Local Intranet zone. This configuration could allow sites that host malicious mobile code to be added to these zones, and users could execute the code.ECSC-1
SV-59481r1_rule DTBI319-IE11 CCI-000345 MEDIUM Internet Explorer must be configured to disallow users to change policies. Users who change their Internet Explorer security settings could enable the execution of dangerous types of code from the Internet and websites listed in the Restricted Sites zone in the browser. This setting prevents users from changing the Internet Explorer policies on the machine. Policy changes should be made by administrators only, so this setting should be enabled. If you enable this policy setting, you disable the "Custom level" button and "Security" level for this zone slider on the Security tab in the Internet Options dialog box. If this policy setting is disabled or not configured, users will be able to change the settings for security zones. It prevents users from changing security zone policy settings that are established by the administrator.ECSC-1
SV-59483r1_rule DTBI320-IE11 CCI-000345 MEDIUM Internet Explorer must be configured to use machine settings. Users who change their Internet Explorer security settings could enable the execution of dangerous types of code from the Internet and websites listed in the Restricted Sites zone in the browser. This setting enforces consistent security zone settings to all users of the computer. Security zones control browser behavior at various websites and it is desirable to maintain a consistent policy for all users of a machine. This policy setting affects how security zone changes apply to different users. If you enable this policy setting, changes that one user makes to a security zone will apply to all users of that computer. If this policy setting is disabled or not configured, users of the same computer are allowed to establish their own security zone settings.ECSC-1
SV-59485r1_rule DTBI325-IE11 CCI-000366 MEDIUM Security checking features must be enforced. This policy setting turns off the Security Settings Check feature, which checks Internet Explorer security settings to determine when the settings put Internet Explorer at risk. If you enable this policy setting, the security settings check will not be performed. If you disable or do not configure this policy setting, the security settings check will be performed.ECSC-1
SV-59489r2_rule DTBI350-IE11 CCI-001170 MEDIUM Software must be disallowed to run or install with invalid signatures. Microsoft ActiveX controls and file downloads often have digital signatures attached that certify the file's integrity and the identity of the signer (creator) of the software. Such signatures help ensure unmodified software is downloaded and the user can positively identify the signer to determine whether you trust them enough to run their software.DCMC-1
SV-59493r2_rule DTBI365-IE11 CCI-000185 LOW Checking for server certificate revocation must be enforced. This policy setting allows you to manage whether Internet Explorer will check revocation status of servers' certificates. Certificates are revoked when they have been compromised or are no longer valid, and this option protects users from submitting confidential data to a site that may be fraudulent or not secure. If you enable this policy setting, Internet Explorer will check to see if server certificates have been revoked. If you disable this policy setting, Internet Explorer will not check server certificates to see if they have been revoked. If you do not configure this policy setting, Internet Explorer will not check server certificates to see if they have been revoked.
SV-59497r1_rule DTBI370-IE11 CCI-000352 MEDIUM Checking for signatures on downloaded programs must be enforced. This policy setting allows you to manage whether Internet Explorer checks for digital signatures (which identifies the publisher of signed software and verifies it has not been modified or tampered with) on user computers before downloading executable programs. If you enable this policy setting, Internet Explorer will check the digital signatures of executable programs and display their identities before downloading them to the user computers. If you disable this policy setting, Internet Explorer will not check the digital signatures of executable programs or display their identities before downloading them to the user computers. If you do not configure this policy, Internet Explorer will not check the digital signatures of executable programs or display their identities before downloading them to the user computers.ECSC-1
SV-59499r1_rule DTBI375-IE11 CCI-000366 MEDIUM All network paths (UNCs) for Intranet sites must be disallowed. Some UNC paths could refer to servers not managed by the organization, which means they could host malicious content; and therefore, it is safest to not include all UNC paths in the Intranet Sites zone. This policy setting controls whether URLs representing UNCs are mapped into the local Intranet security zone. If you enable this policy setting, all network paths are mapped into the Intranet Zone. If you disable this policy setting, network paths are not necessarily mapped into the Intranet Zone (other rules might map one there). If you do not configure this policy setting, users choose whether network paths are mapped into the Intranet Zone.ECSC-1
SV-59501r1_rule DTBI385-IE11 CCI-000381 MEDIUM Script-initiated windows without size or position constraints must be disallowed (Internet zone). This policy setting allows you to manage restrictions on script-initiated pop-up windows and windows including the title and status bars. If you enable this policy setting, Windows Restrictions security will not apply in this zone. The security zone runs without the added layer of security provided by this feature. If you disable this policy setting, the possible harmful actions contained in script-initiated pop-up windows and windows including the title and status bars cannot be run. This Internet Explorer security feature will be on in this zone as dictated by the Scripted Windows Security Restrictions feature control setting for the process. If you do not configure this policy setting, the possible harmful actions contained in script-initiated pop-up windows and windows including the title and status bars cannot be run. This Internet Explorer security feature will be on in this zone as dictated by the Scripted Windows Security Restrictions feature control setting for the process.ECSC-1
SV-59503r1_rule DTBI390-IE11 CCI-000381 MEDIUM Script-initiated windows without size or position constraints must be disallowed (Restricted Sites zone). This policy setting allows you to manage restrictions on script-initiated pop-up windows and windows including the title and status bars. If you enable this policy setting, Windows Restrictions security will not apply in this zone. The security zone runs without the added layer of security provided by this feature. If you disable this policy setting, the possible harmful actions contained in script-initiated pop-up windows and windows including the title and status bars cannot be run. This Internet Explorer security feature will be on in this zone as dictated by the Scripted Windows Security Restrictions feature control setting for the process. If you do not configure this policy setting, the possible harmful actions contained in script-initiated pop-up windows and windows including the title and status bars cannot be run. This Internet Explorer security feature will be on in this zone as dictated by the Scripted Windows Security Restrictions feature control setting for the process.ECSC-1
SV-59505r1_rule DTBI395-IE11 CCI-000381 MEDIUM Scriptlets must be disallowed (Internet zone). This policy setting allows you to manage whether scriptlets can be allowed. Scriptlets hosted on sites located in this zone are more likely to contain malicious code. If you enable this policy setting, users will be able to run scriptlets. If you disable this policy setting, users will not be able to run scriptlets. If you do not configure this policy setting, a scriptlet can be enabled or disabled by the user.ECSC-1
SV-59507r1_rule DTBI415-IE11 CCI-000381 MEDIUM Automatic prompting for file downloads must be disallowed (Internet zone). This policy setting determines whether users will be prompted for non user-initiated file downloads. Regardless of this setting, users will receive file download dialogs for user-initiated downloads. Users may accept downloads that they did not request, and those downloaded files may include malicious code. If you enable this setting, users will receive a file download dialog for automatic download attempts. If you disable or do not configure this setting, file downloads that are not user-initiated will be blocked, and users will see the information bar instead of the file download dialog. Users can then click the information bar to allow the file download prompt.ECSC-1
SV-59509r1_rule DTBI425-IE11 CCI-000381 MEDIUM Java permissions must be disallowed (Local Machine zone). Java applications could contain malicious code. This policy setting allows you to manage permissions for Java applets. If you enable this policy setting, options can be chosen from the drop-down box. Use of the Custom permission will control permissions settings individually. Use of the Low Safety permission enables applets to perform all operations. Use of the Medium Safety permission enables applets to run in their sandbox (an area in memory outside of which the program cannot make calls), plus adds capabilities like scratch space (a safe and secure storage area on the client computer) and a user-controlled file I/O. Use of the High Safety permission enables applets to run in their sandbox. If you disable this policy setting, Java applets cannot run. If you do not configure this policy setting, the permission is set to High Safety. DCMC-1
SV-59511r1_rule DTBI430-IE11 CCI-000381 MEDIUM Java permissions must be disallowed (Locked Down Local Machine zone). Java applications could contain malicious code. This policy setting allows you to manage permissions for Java applets. If you enable this policy setting, options can be chosen from the drop-down box. Use of the Custom permission will control permissions settings individually. Use of the Low Safety permission enables applets to perform all operations. Use of the Medium Safety permission enables applets to run in their sandbox (an area in memory outside of which the program cannot make calls), plus adds capabilities like scratch space (a safe and secure storage area on the client computer) and a user-controlled file I/O. Use of the High Safety permission enables applets to run in their sandbox. If you disable this policy setting, Java applets cannot run. If you do not configure this policy setting, the permission is set to High Safety.DCMC-1
SV-59513r1_rule DTBI435-IE11 CCI-000381 MEDIUM Java permissions must be disallowed (Locked Down Intranet zone). Java applications could contain malicious code. This policy setting allows you to manage permissions for Java applets. If you enable this policy setting, options can be chosen from the drop-down box. Use of the Custom permission will control permissions settings individually. Use of the Low Safety permission enables applets to perform all operations. Use of the Medium Safety permission enables applets to run in their sandbox (an area in memory outside of which the program cannot make calls), plus adds capabilities like scratch space (a safe and secure storage area on the client computer) and a user-controlled file I/O. Use of the High Safety permission enables applets to run in their sandbox. If you disable this policy setting, Java applets cannot run. If you do not configure this policy setting, the permission is set to High Safety.DCMC-1
SV-59517r1_rule DTBI440-IE11 CCI-000381 MEDIUM Java permissions must be disallowed (Locked Down Trusted Sites zone). Java applications could contain malicious code; sites located in this security zone are more likely to be hosted by malicious individuals. This policy setting allows you to manage permissions for Java applets. If you enable this policy setting, options can be chosen from the drop-down box. Use of the Custom permission will control permissions settings individually. Use of the Low Safety permission enables applets to perform all operations. Use of the Medium Safety permission enables applets to run in their sandbox (an area in memory outside of which the program cannot make calls), plus adds capabilities like scratch space (a safe and secure storage area on the client computer) and a user-controlled file I/O. Use of the High Safety permission enables applets to run in their sandbox. If you disable this policy setting, Java applets cannot run. If you do not configure this policy setting, the permission is set to High Safety. DCMC-1
SV-59527r1_rule DTBI450-IE11 CCI-000381 MEDIUM Java permissions must be disallowed (Locked Down Restricted Sites zone). Java applications could contain malicious code. This policy setting allows you to manage permissions for Java applets. If you enable this policy setting, options can be chosen from the drop-down box. Use of the Custom permission will control permissions settings individually. Use of the Low Safety permission enables applets to perform all operations. Use of the Medium Safety permission enables applets to run in their sandbox (an area in memory outside of which the program cannot make calls), plus adds capabilities like scratch space (a safe and secure storage area on the client computer) and a user-controlled file I/O. Use of the High Safety permission enables applets to run in their sandbox. If you disable this policy setting, Java applets cannot run. If you do not configure this policy setting, the permission is set to High Safety. DCMC-1
SV-59529r1_rule DTBI455-IE11 CCI-000366 MEDIUM XAML files must be disallowed (Internet zone). These are eXtensible Application Markup Language (XAML) files. XAML is an XML-based declarative markup language commonly used for creating rich user interfaces and graphics that leverage the Windows Presentation Foundation. If you enable this policy setting and the drop-down box is set to Enable, XAML files will be automatically loaded inside Internet Explorer. Users will not be able to change this behavior. If the drop-down box is set to Prompt, users will receive a prompt for loading XAML files. If you disable this policy setting, XAML files will not be loaded inside Internet Explorer. Users will not be able to change this behavior. If you do not configure this policy setting, users will have the freedom to decide whether to load XAML files inside Internet Explorer.ECSC-1
SV-59533r1_rule DTBI460-IE11 CCI-000366 MEDIUM XAML files must be disallowed (Restricted Sites zone). These are eXtensible Application Markup Language (XAML) files. XAML is an XML-based declarative markup language commonly used for creating rich user interfaces and graphics that leverage the Windows Presentation Foundation. If you enable this policy setting and the drop-down box is set to Enable, XAML files will be automatically loaded inside Internet Explorer. Users will not be able to change this behavior. If the drop-down box is set to Prompt, users will receive a prompt for loading XAML files. If you disable this policy setting, XAML files will not be loaded inside Internet Explorer. Users will not be able to change this behavior. If you do not configure this policy setting, users will have the freedom to decide whether to load XAML files inside Internet Explorer.ECSC-1
SV-59545r1_rule DTBI485-IE11 CCI-001084 MEDIUM Protected Mode must be enforced (Internet zone). Protected Mode protects Internet Explorer from exploited vulnerabilities by reducing the locations Internet Explorer can write to in the registry and the file system. If you enable this policy setting, Protected Mode will be turned on. Users will not be able to turn off Protected Mode. If you disable this policy setting, Protected Mode will be turned off. It will revert to Internet Explorer 6 behavior that allows for Internet Explorer to write to the registry and the file system. Users will not be able to turn on Protected Mode. If you do not configure this policy, users will be able to turn on or off Protected Mode.ECSC-1
SV-59549r1_rule DTBI490-IE11 CCI-001084 MEDIUM Protected Mode must be enforced (Restricted Sites zone). Protected Mode protects Internet Explorer from exploited vulnerabilities by reducing the locations Internet Explorer can write to in the registry and the file system. If you enable this policy setting, Protected Mode will be turned on. Users will not be able to turn off Protected Mode. If you disable this policy setting, Protected Mode will be turned off. It will revert to Internet Explorer 6 behavior that allows for Internet Explorer to write to the registry and the file system. Users will not be able to turn on Protected Mode. If you do not configure this policy, users will be able to turn on or off Protected Mode.ECSC-1
SV-59553r1_rule DTBI495-IE11 CCI-000381 MEDIUM Pop-up Blocker must be enforced (Internet zone). This policy setting allows you to manage whether unwanted pop-up windows appear. Pop-up windows that are opened when the end user clicks a link are not blocked. If you enable this policy setting, most unwanted pop-up windows are prevented from appearing. If you disable this policy setting, pop-up windows are not prevented from appearing. If you do not configure this policy setting, most unwanted pop-up windows are prevented from appearing.ECSC-1
SV-59555r1_rule DTBI500-IE11 CCI-000381 MEDIUM Pop-up Blocker must be enforced (Restricted Sites zone). This policy setting allows you to manage whether unwanted pop-up windows appear. Pop-up windows that are opened when the end user clicks a link are not blocked. If you enable this policy setting, most unwanted pop-up windows are prevented from appearing. If you disable this policy setting, pop-up windows are not prevented from appearing. If you do not configure this policy setting, most unwanted pop-up windows are prevented from appearing.ECSC-1
SV-59557r1_rule DTBI515-IE11 CCI-001414 MEDIUM Websites in less privileged web content zones must be prevented from navigating into the Internet zone. This policy setting allows a user to manage whether websites from less privileged zones, such as Restricted Sites, can navigate into the Internet zone. If this policy setting is enabled, websites from less privileged zones can open new windows in, or navigate into, this zone. The security zone will run without the added layer of security that is provided by the Protection from Zone Elevation security feature. If "Prompt" is selected in the drop-down box, a warning is issued to the user that potentially risky navigation is about to occur. If this policy setting is disabled, the potentially risky navigation is prevented. The Internet Explorer security feature will be on in this zone as set by the Protection from Zone Elevation feature control. If this policy setting is not configured, websites from less privileged zones can open new windows in, or navigate into, this zone.ECSC-1
SV-59559r1_rule DTBI520-IE11 CCI-001414 MEDIUM Websites in less privileged web content zones must be prevented from navigating into the Restricted Sites zone. This policy setting allows you to manage whether websites from less privileged zones, such as Restricted Sites, can navigate into the Restricted zone. If this policy setting is enabled, websites from less privileged zones can open new windows in, or navigate into, this zone. The security zone will run without the added layer of security that is provided by the Protection from Zone Elevation security feature. If Prompt is selected in the drop-down box, a warning is issued to the user that potentially risky navigation is about to occur. If this policy setting is disabled, the potentially risky navigation is prevented. The Internet Explorer security feature will be on in this zone as set by the Protection from Zone Elevation feature control. If this policy setting is not configured, websites from less privileged zones can open new windows in, or navigate into, this zone.ECSC-1
SV-59565r1_rule DTBI575-IE11 CCI-000381 MEDIUM Allow binary and script behaviors must be disallowed (Restricted Sites zone). This policy setting allows you to manage dynamic binary and script behaviors of components that encapsulate specific functionality for HTML elements, to which they were attached. If you enable this policy setting, binary and script behaviors are available. If you select "Administrator approved" in the drop-down box, only the behaviors listed in the Admin-approved Behaviors under Binary Behaviors Security Restriction policy are available. If you disable this policy setting, binary and script behaviors are not available unless applications have implemented a custom security manager. If you do not configure this policy setting, binary and script behaviors are available.ECSC-1
SV-59569r1_rule DTBI580-IE11 CCI-000381 MEDIUM Automatic prompting for file downloads must be disallowed (Restricted Sites zone). This policy setting determines whether users will be prompted for non user-initiated file downloads. Regardless of this setting, users will receive file download dialogs for user-initiated downloads. Users may accept downloads that they did not request, and those downloaded files may include malicious code. If you enable this setting, users will receive a file download dialog for automatic download attempts. If you disable or do not configure this setting, file downloads that are not user-initiated will be blocked, and users will see the information bar instead of the file download dialog. Users can then click the information bar to allow the file download prompt.ECSC-1
SV-59573r1_rule DTBI590-IE11 CCI-001166 MEDIUM Internet Explorer Processes for MIME handling must be enforced. (Reserved) Internet Explorer uses Multipurpose Internet Mail Extensions (MIME) data to determine file handling procedures for files received through a web server. The Consistent MIME Handling\Internet Explorer Processes policy setting determines whether Internet Explorer requires all file-type information provided by web servers to be consistent. For example, if the MIME type of a file is text/plain but the MIME data indicates the file is really an executable file, Internet Explorer changes its extension to reflect this executable status. This capability helps ensure executable code cannot masquerade as other types of data that may be trusted. If you enable this policy setting, Internet Explorer examines all received files and enforces consistent MIME data for them. If you disable or do not configure this policy setting, Internet Explorer does not require consistent MIME data for all received files and will use the MIME data provided by the file. MIME file-type spoofing is a potential threat to an organization. Ensuring these files are consistent and properly labeled helps prevent malicious file downloads from infecting your network.ECSC-1
SV-59575r1_rule DTBI592-IE11 CCI-001166 MEDIUM Internet Explorer Processes for MIME handling must be enforced (Explorer). Internet Explorer uses Multipurpose Internet Mail Extensions (MIME) data to determine file handling procedures for files received through a web server. The Consistent MIME Handling\Internet Explorer Processes policy setting determines whether Internet Explorer requires all file-type information provided by web servers to be consistent. For example, if the MIME type of a file is text/plain but the MIME data indicates the file is really an executable file, Internet Explorer changes its extension to reflect this executable status. This capability helps ensure executable code cannot masquerade as other types of data that may be trusted. If you enable this policy setting, Internet Explorer examines all received files and enforces consistent MIME data for them. If you disable or do not configure this policy setting, Internet Explorer does not require consistent MIME data for all received files and will use the MIME data provided by the file. MIME file-type spoofing is a potential threat to the organization. Ensuring these files are consistent and properly labeled helps prevent malicious file downloads from infecting the network. This guide recommends configuring this policy as "Enabled" for all environments specified in this guide.ECSC-1
SV-59577r1_rule DTBI594-IE11 CCI-001166 MEDIUM Internet Explorer Processes for MIME handling must be enforced (iexplore). Internet Explorer uses Multipurpose Internet Mail Extensions (MIME) data to determine file handling procedures for files received through a web server. The Consistent MIME Handling\Internet Explorer Processes policy setting determines whether Internet Explorer requires all file-type information provided by web servers to be consistent. For example, if the MIME type of a file is text/plain but the MIME data indicates that the file is really an executable file, Internet Explorer changes its extension to reflect this executable status. This capability helps ensure that executable code cannot masquerade as other types of data that may be trusted. If you enable this policy setting, Internet Explorer examines all received files and enforces consistent MIME data for them. If you disable or do not configure this policy setting, Internet Explorer does not require consistent MIME data for all received files and will use the MIME data provided by the file. MIME file-type spoofing is a potential threat to an organization. Ensuring these files are consistent and properly labeled helps prevent malicious file downloads from infecting the network. This guide recommends configuring this policy as "Enabled" for all environments specified in this guide.ECSC-1
SV-59579r1_rule DTBI595-IE11 CCI-001166 MEDIUM Internet Explorer Processes for MIME sniffing must be enforced (Reserved). MIME sniffing is the process of examining the content of a MIME file to determine its context - whether it is a data file, an executable file, or some other type of file. This policy setting determines whether Internet Explorer MIME sniffing will prevent promotion of a file of one type to a more dangerous file type. When set to "Enabled", MIME sniffing will never promote a file of one type to a more dangerous file type. Disabling MIME sniffing configures Internet Explorer processes to allow a MIME sniff that promotes a file of one type to a more dangerous file type. For example, promoting a text file to an executable file is a dangerous promotion because any code in the supposed text file would be executed. MIME file-type spoofing is a potential threat to an organization. Ensuring these files are consistently handled helps prevent malicious file downloads from infecting the network. This guide recommends you configure this policy as "Enabled" for all environments specified in this guide. Note: This setting works in conjunction with, but does not replace, the Consistent MIME Handling settings.ECSC-1
SV-59581r1_rule DTBI596-IE11 CCI-001166 MEDIUM Internet Explorer Processes for MIME sniffing must be enforced (Explorer). MIME sniffing is the process of examining the content of a MIME file to determine its context - whether it is a data file, an executable file, or some other type of file. This policy setting determines whether Internet Explorer MIME sniffing will prevent promotion of a file of one type to a more dangerous file type. When set to "Enabled", MIME sniffing will never promote a file of one type to a more dangerous file type. Disabling MIME sniffing configures Internet Explorer processes to allow a MIME sniff that promotes a file of one type to a more dangerous file type. For example, promoting a text file to an executable file is a dangerous promotion because any code in the supposed text file would be executed. MIME file-type spoofing is a potential threat to an organization. Ensuring these files are consistently handled helps prevent malicious file downloads from infecting the network. This guide recommends configuring this policy as "Enabled" for all environments specified in this guide. Note: This setting works in conjunction with, but does not replace, the Consistent MIME Handling settings.ECSC-1
SV-59583r1_rule DTBI597-IE11 CCI-001166 MEDIUM Internet Explorer Processes for MIME sniffing must be enforced (iexplore). MIME sniffing is the process of examining the content of a MIME file to determine its context - whether it is a data file, an executable file, or some other type of file. This policy setting determines whether Internet Explorer MIME sniffing will prevent promotion of a file of one type to a more dangerous file type. When set to "Enabled", MIME sniffing will never promote a file of one type to a more dangerous file type. Disabling MIME sniffing configures Internet Explorer processes to allow a MIME sniff that promotes a file of one type to a more dangerous file type. For example, promoting a text file to an executable file is a dangerous promotion because any code in the supposed text file would be executed. MIME file-type spoofing is a potential threat to an organization. Ensuring these files are consistently handled helps prevent malicious file downloads from infecting the network. This guide recommends configuring this policy as "Enabled" for all environments specified in this guide. Note: This setting works in conjunction with, but does not replace, the Consistent MIME Handling settings.ECSC-1
SV-59585r1_rule DTBI599-IE11 CCI-000381 MEDIUM Internet Explorer Processes for MK protocol must be enforced (Reserved). The MK Protocol Security Restriction policy setting reduces attack surface area by blocking the seldom used MK protocol. Some older web applications use the MK protocol to retrieve information from compressed files. Because the MK protocol is not widely used, it should be blocked wherever it is not needed. Setting this policy to "Enabled"; blocks the MK protocol for Windows Explorer and Internet Explorer, which causes resources that use the MK protocol to fail. Disabling this setting allows applications to use the MK protocol API. This guide recommends configuring this setting to "Enabled" to block the MK protocol unless it is specifically needed in the environment. Note: Because resources that use the MK protocol will fail when deploying this setting, ensure none of the applications use the MK protocol.ECSC-1
SV-59587r1_rule DTBI600-IE11 CCI-000381 MEDIUM Internet Explorer Processes for MK protocol must be enforced (Explorer). The MK Protocol Security Restriction policy setting reduces attack surface area by blocking the seldom used MK protocol. Some older web applications use the MK protocol to retrieve information from compressed files. Because the MK protocol is not widely used, it should be blocked wherever it is not needed. Setting this policy to "Enabled"; blocks the MK protocol for Windows Explorer and Internet Explorer, which causes resources that use the MK protocol to fail. Disabling this setting allows applications to use the MK protocol API. This guide recommends you configure this setting to "Enabled" to block the MK protocol unless it is specifically needed in the environment. Note: Because resources that use the MK protocol will fail when deploying this setting, ensure none of the applications use the MK protocol.ECSC-1
SV-59589r1_rule DTBI605-IE11 CCI-000381 MEDIUM Internet Explorer Processes for MK protocol must be enforced (iexplore). The MK Protocol Security Restriction policy setting reduces attack surface area by blocking the seldom used MK protocol. Some older web applications use the MK protocol to retrieve information from compressed files. Because the MK protocol is not widely used, it should be blocked wherever it is not needed. Setting this policy to "Enabled"; blocks the MK protocol for Windows Explorer and Internet Explorer, which causes resources that use the MK protocol to fail. Disabling this setting allows applications to use the MK protocol API. This guide recommends you configure this setting to "Enabled" to block the MK protocol unless specifically needed in the environment. Note: Because resources that use the MK protocol will fail when deploying this setting, ensure none of the applications use the MK protocol.ECSC-1
SV-59591r1_rule DTBI610-IE11 CCI-001084 MEDIUM Internet Explorer Processes for Zone Elevation must be enforced (Reserved). Internet Explorer places restrictions on each web page it opens that are dependent upon the location of the web page (such as Internet Zone, Intranet Zone, or Local Machine Zone). Web pages on a local computer have the fewest security restrictions and reside in the Local Machine Zone, which makes the Local Machine Security Zone a prime target for malicious attackers. If you enable this policy setting, any zone can be protected from zone elevation by Internet Explorer processes. This approach stops content running in one zone from gaining the elevated privileges of another zone. If you disable this policy setting, no zone receives such protection from Internet Explorer processes. Because of the severity and relative frequency of zone elevation attacks, this guide recommends that you configure this setting as "Enabled" in all environments.ECSC-1
SV-59593r1_rule DTBI612-IE11 CCI-001084 MEDIUM Internet Explorer Processes for Zone Elevation must be enforced (Explorer). Internet Explorer places restrictions on each web page it opens that are dependent upon the location of the web page (such as Internet Zone, Intranet Zone, or Local Machine Zone). Web pages on a local computer have the fewest security restrictions and reside in the Local Machine Zone, which makes the Local Machine Security Zone a prime target for malicious attackers. If you enable this policy setting, any zone can be protected from zone elevation by Internet Explorer processes. This approach stops content running in one zone from gaining the elevated privileges of another zone. If you disable this policy setting, no zone receives such protection from Internet Explorer processes. Because of the severity and relative frequency of zone elevation attacks, this guide recommends configuring this setting as "Enabled" in all environments.ECSC-1
SV-59595r1_rule DTBI614-IE11 CCI-001084 MEDIUM Internet Explorer Processes for Zone Elevation must be enforced (iexplore). Internet Explorer places restrictions on each web page it opens that are dependent upon the location of the web page (such as Internet Zone, Intranet Zone, or Local Machine Zone). Web pages on a local computer have the fewest security restrictions and reside in the Local Machine Zone, which makes the Local Machine Security Zone a prime target for malicious attackers. If you enable this policy setting, any zone can be protected from zone elevation by Internet Explorer processes. This approach stops content running in one zone from gaining the elevated privileges of another zone. If you disable this policy setting, no zone receives such protection from Internet Explorer processes. Because of the severity and relative frequency of zone elevation attacks, this guide recommends that you configure this setting as "Enabled" in all environments.ECSC-1
SV-59597r1_rule DTBI630-IE11 CCI-000381 MEDIUM Internet Explorer Processes for Restrict File Download must be enforced (Reserved). In certain circumstances, websites can initiate file download prompts without interaction from users. This technique can allow websites to put unauthorized files on users' hard drives if they click the wrong button and accept the download. If you configure the Restrict File Download\Internet Explorer Processes policy setting to "Enabled", file download prompts that are not user-initiated are blocked for Internet Explorer processes. If you configure this policy setting as "Disabled", prompting will occur for file downloads that are not user-initiated for Internet Explorer processes. Note: This setting is configured as "Enabled" in all environments specified in this guide to help prevent attackers from placing arbitrary code on users' computers.ECSC-1
SV-59645r1_rule DTBI635-IE11 CCI-000381 MEDIUM Internet Explorer Processes for Restrict File Download must be enforced (Explorer). In certain circumstances, websites can initiate file download prompts without interaction from users. This technique can allow websites to put unauthorized files on users' hard drives if they click the wrong button and accept the download. If you configure the Restrict File Download\Internet Explorer Processes policy setting to "Enabled", file download prompts that are not user-initiated are blocked for Internet Explorer processes. If you configure this policy setting as "Disabled", prompting will occur for file downloads that are not user-initiated for Internet Explorer processes. Note: This setting is configured as "Enabled" in all environments specified in this guide to help prevent attackers from placing arbitrary code on users' computers.ECSC-1
SV-59647r1_rule DTBI640-IE11 CCI-000381 MEDIUM Internet Explorer Processes for Restrict File Download must be enforced (iexplore). In certain circumstances, websites can initiate file download prompts without interaction from users. This technique can allow websites to put unauthorized files on users' hard drives if they click the wrong button and accept the download. If you configure the Restrict File Download\Internet Explorer Processes policy setting to "Enabled", file download prompts that are not user-initiated are blocked for Internet Explorer processes. If you configure this policy setting as "Disabled", prompting will occur for file downloads that are not user-initiated for Internet Explorer processes. Note: This setting is configured as "Enabled" in all environments specified in this guide to help prevent attackers from placing arbitrary code on users' computers.ECSC-1
SV-59653r1_rule DTBI645-IE11 CCI-000381 MEDIUM Internet Explorer Processes for restricting pop-up windows must be enforced (Reserved). Internet Explorer allows scripts to programmatically open, resize, and reposition various types of windows. Often, disreputable websites will resize windows to either hide other windows or force the user to interact with a window containing malicious code. The Scripted Window Security Restrictions security feature restricts pop-up windows and prohibits scripts from displaying windows in which the title and status bars are not visible to the user, or which hide other windows' title and status bars. If you enable the Scripted Window Security Restrictions\Internet Explorer Processes policy setting, pop-up windows and other restrictions apply for Windows Explorer and Internet Explorer processes. If you disable or do not configure this policy setting, scripts can continue to create pop-up windows, and create windows that hide other windows. Recommend configuring this setting to "Enabled" to help prevent malicious websites from controlling the Internet Explorer windows or fooling users into clicking on the wrong window.ECSC-1
SV-59655r1_rule DTBI647-IE11 CCI-000381 MEDIUM Internet Explorer Processes for restricting pop-up windows must be enforced (Explorer). Internet Explorer allows scripts to programmatically open, resize, and reposition various types of windows. Often, disreputable websites will resize windows to either hide other windows or force a user to interact with a window that contains malicious code. The Scripted Window Security Restrictions security feature restricts pop-up windows and prohibits scripts from displaying windows in which the title and status bars are not visible to the user, or which hide other windows' title and status bars. If you enable the Scripted Window Security Restrictions\Internet Explorer Processes policy setting, pop-up windows and other restrictions apply for Windows Explorer and Internet Explorer processes. If you disable or do not configure this policy setting, scripts can continue to create pop-up windows and create windows that hide other windows. This guide recommends configuring this setting to "Enabled" to help prevent malicious websites from controlling the Internet Explorer windows or fooling users into clicking on the wrong window.ECSC-1
SV-59657r1_rule DTBI649-IE11 CCI-000381 MEDIUM Internet Explorer Processes for restricting pop-up windows must be enforced (iexplore). Internet Explorer allows scripts to programmatically open, resize, and reposition various types of windows. Often, disreputable websites will resize windows to either hide other windows or force a user to interact with a window that contains malicious code. The Scripted Window Security Restrictions security feature restricts pop-up windows and prohibits scripts from displaying windows in which the title and status bars are not visible to the user, or which hide other windows' title and status bars. If you enable the Scripted Window Security Restrictions\Internet Explorer Processes policy setting, pop-up windows and other restrictions apply for Windows Explorer and Internet Explorer processes. If you disable or do not configure this policy setting, scripts can continue to create pop-up windows and create windows that hide other windows. This guide recommends configuring this setting to "Enabled" to help prevent malicious websites from controlling the Internet Explorer windows or fooling users into clicking on the wrong window.ECSC-1
SV-59663r1_rule DTBI650-IE11 CCI-001687 MEDIUM .NET Framework-reliant components not signed with Authenticode must be disallowed to run (Restricted Sites Zone). This policy setting allows you to manage whether .NET Framework-reliant components that are not signed with Authenticode can be executed from Internet Explorer. These components include managed controls referenced from an object tag and managed executables referenced from a link. If you enable this policy setting, Internet Explorer will execute unsigned managed components. If you select "Prompt" in the drop-down box, Internet Explorer will prompt the user to determine whether to execute unsigned managed components. If you disable this policy setting, Internet Explorer will not execute unsigned managed components. If you do not configure this policy setting, Internet Explorer will execute unsigned managed components.ECSC-1
SV-59665r1_rule DTBI655-IE11 CCI-001687 MEDIUM .NET Framework-reliant components signed with Authenticode must be disallowed to run (Restricted Sites Zone). This policy setting allows you to manage whether .NET Framework-reliant components that are signed with Authenticode can be executed from Internet Explorer. It may be possible for malicious content hosted on a website to take advantage of these components. These components include managed controls referenced from an object tag and managed executables referenced from a link. If you enable this policy setting, Internet Explorer will execute signed managed components. If you select "Prompt" in the drop-down box, Internet Explorer will prompt the user to determine whether to execute signed managed components. If you disable this policy setting, Internet Explorer will not execute signed managed components. If you do not configure this policy setting, Internet Explorer will execute signed managed components.ECSC-1
SV-59667r1_rule DTBI670-IE11 CCI-000381 MEDIUM Scripting of Java applets must be disallowed (Restricted Sites zone). This policy setting allows you to manage whether applets are exposed to scripts within the zone. If you enable this policy setting, scripts can access applets automatically without user intervention. If you select "Prompt" in the drop-down box, users are queried to choose whether to allow scripts to access applets. If you disable this policy setting, scripts are prevented from accessing applets. If you do not configure this policy setting, scripts can access applets automatically without user intervention. ECSC-1
SV-59673r1_rule DTBI690-IE11 CCI-000381 MEDIUM AutoComplete feature for forms must be disallowed. This AutoComplete feature suggests possible matches when users are filling in forms. It is possible that this feature will cache sensitive data and store it in the user's profile, where it might not be protected as rigorously as required by organizational policy. If you enable this setting, the user is not presented with suggested matches when filling in forms. If you disable this setting, the user is presented with suggested possible matches when filling forms. If you do not configure this setting, the user has the freedom to turn on the auto-complete feature for forms. To display this option, the user opens the Internet Options dialog box, clicks the "Contents" tab, and clicks the "Settings" button.ECSC-1
SV-59677r1_rule DTBI715-IE11 CCI-000381 MEDIUM Crash Detection management must be enforced. The 'Turn off Crash Detection' policy setting allows you to manage the crash detection feature of add-on management in Internet Explorer. A crash report could contain sensitive information from the computer's memory. If you enable this policy setting, a crash in Internet Explorer will be similar to one on a computer running Windows XP Professional Service Pack 1 and earlier, where Windows Error Reporting will be invoked. If you disable this policy setting, the crash detection feature in add-on management will be functional. ECSC-1
SV-59681r1_rule DTBI725-IE11 CCI-000381 MEDIUM Turn on the auto-complete feature for user names and passwords on forms must be disabled. This policy setting controls automatic completion of fields in forms on web pages. It is possible that malware could be developed which would be able to extract the cached user names and passwords from the currently logged on user, which an attacker could then use to compromise that user's online accounts. If you enable this setting, the user cannot change the 'User name and passwords on forms' or 'prompt me to save passwords'. The Auto Complete feature for" User names and passwords on forms" will be turned on. If you disable this setting, the user cannot change the 'User name and passwords on forms' or 'prompt me to save passwords'. The Auto Complete feature for "User names and passwords on forms" is turned off. The user also cannot opt to be prompted to save passwords. If you do not configure this setting, the user has the freedom of turning on Auto Complete for "User name and passwords on forms", and the option of prompting to save passwords.ECSC-1
SV-59685r3_rule DTBI740-IE11 CCI-001166 MEDIUM Managing SmartScreen Filter use must be enforced. This setting is important from a security perspective because Microsoft has extensive data illustrating the positive impact the SmartScreen filter has had on reducing the risk of malware infection via visiting malicious websites. This policy setting allows users to enable the SmartScreen Filter, which will warn if the website being visited is known for fraudulent attempts to gather personal information through 'phishing' or is known to host malware. If you enable this setting the user will not be prompted to enable the SmartScreen Filter. It must be specified which mode the SmartScreen Filter uses: On or Off. If the feature is On, all website addresses not contained on the filters allow list, will be sent automatically to Microsoft without prompting the user. If this feature is set to Off, the feature will not run. If you disable or do not configure this policy setting, the user is prompted to decide whether to turn on SmartScreen Filter during the first-run experience.
SV-59695r1_rule DTBI760-IE11 CCI-000169 MEDIUM Browser must retain history on exit. Delete Browsing History on exit automatically deletes specified items when the last browser window closes. Disabling this function will prevent users from deleting their browsing history, which could be used to identify malicious websites and files that could later be used for anti-virus and Intrusion Detection System (IDS) signatures. Furthermore, preventing users from deleting browsing history could be used to identify abusive web surfing on government systems.ECSC-1
SV-59707r1_rule DTBI770-IE11 CCI-000169 MEDIUM Deleting websites that the user has visited must be disallowed. This policy prevents users from deleting the history of websites the user has visited. If you enable this policy setting, websites the user has visited will be preserved when the user clicks "Delete". If you disable this policy setting, websites that the user has visited will be deleted when the user clicks "Delete". If you do not configure this policy setting, the user will be able to select whether to delete or preserve websites the user visited when the user clicks "Delete".ECSC-1
SV-59713r1_rule DTBI780-IE11 CCI-000166 MEDIUM InPrivate Browsing must be disallowed. InPrivate Browsing lets the user control whether or not Internet Explorer saves the browsing history, cookies, and other data. User control of settings is not the preferred control method. The InPrivate Browsing feature in Internet Explorer makes browser privacy easy by not storing history, cookies, temporary Internet files, or other data. If you enable this policy setting, InPrivate Browsing will be disabled. If you disable this policy setting, InPrivate Browsing will be available for use. If you do not configure this setting, InPrivate Browsing can be turned on or off through the registry.ECSC-1
SV-59715r1_rule DTBI800-IE11 CCI-000381 MEDIUM Scripting of Internet Explorer WebBrowser control property must be disallowed (Internet zone). This policy setting controls whether a page may control embedded WebBrowser control via script. Scripted code hosted on sites located in this zone is more likely to contain malicious code. If you enable this policy setting, script access to the WebBrowser control is allowed. If you disable this policy setting, script access to the WebBrowser control is not allowed. If you do not configure this policy setting, script access to the WebBrowser control can be enabled or disabled by the user. By default, script access to the WebBrowser control is only allowed in the Local Machine and Intranet Zones.ECSC-1
SV-59719r1_rule DTBI810-IE11 CCI-000381 MEDIUM When uploading files to a server, the local directory path must be excluded (Internet zone). This policy setting controls whether or not the local path information will be sent when uploading a file via a HTML form. If the local path information is sent, some information may be unintentionally revealed to the server. If you do not configure this policy setting, the user can choose whether path information will be sent when uploading a file via a form. By default, path information will be sent.ECSC-1
SV-59723r1_rule DTBI815-IE11 CCI-000381 MEDIUM Internet Explorer Processes for Notification Bars must be enforced (Reserved). This policy setting allows you to manage whether the Notification Bar is displayed for Internet Explorer processes when file or code installs are restricted. By default, the Notification Bar is displayed for Internet Explorer processes. If you enable this policy setting, the Notification Bar will be displayed for Internet Explorer processes. If you disable this policy setting, the Notification Bar will not be displayed for Internet Explorer processes. If you do not configure this policy setting, the Notification Bar will be displayed for Internet Explorer processes.ECSC-1
SV-59725r1_rule DTBI820-IE11 CCI-001274 MEDIUM Security Warning for unsafe files must be set to prompt (Internet zone). This policy setting controls whether or not the 'Open File - Security Warning' message appears when the user tries to open executable files or other potentially unsafe files (from an intranet file shared by using Windows Explorer, for example). If you enable this policy setting and set the drop-down box to "Enable", these files open without a security warning. If you set the drop-down box to " Prompt", a security warning appears before the files open. If you disable this policy these files do not open. If you do not configure this policy setting, the user can configure how the computer handles these files.ECSC-1
SV-59727r1_rule DTBI825-IE11 CCI-000381 MEDIUM Internet Explorer Processes for Notification Bars must be enforced (Explorer). This policy setting allows you to manage whether the Notification Bar is displayed for Internet Explorer processes when file or code installs are restricted. By default, the Notification Bar is displayed for Internet Explorer processes. If you enable this policy setting, the Notification Bar will be displayed for Internet Explorer processes. If you disable this policy setting, the Notification Bar will not be displayed for Internet Explorer processes. If you do not configure this policy setting, the Notification Bar will be displayed for Internet Explorer processes.ECSC-1
SV-59729r1_rule DTBI830-IE11 CCI-001170 MEDIUM ActiveX controls without prompt property must be used in approved domains only (Internet zone). This policy setting controls whether or not the user is prompted to allow ActiveX controls to run on websites other than the website that installed the ActiveX control. If the user were to disable the setting for the zone, malicious ActiveX controls could be executed without the user's knowledge. Disabling this setting would allow the possibility for malicious ActiveX controls to be executed from non-approved domains within this zone without the user's knowledge. Enabling this setting enforces the default value and prohibits the user from changing the value. Websites should be moved into another zone if permissions need to be changed.ECSC-1
SV-59735r1_rule DTBI835-IE11 CCI-000381 MEDIUM Internet Explorer Processes for Notification Bars must be enforced (iexplore). This policy setting allows you to manage whether the Notification Bar is displayed for Internet Explorer processes when file or code installs are restricted. By default, the Notification Bar is displayed for Internet Explorer processes. If you enable this policy setting, the Notification Bar will be displayed for Internet Explorer processes. If you disable this policy setting, the Notification Bar will not be displayed for Internet Explorer processes. If you do not configure this policy setting, the Notification Bar will be displayed for Internet Explorer processes.ECSC-1
SV-59745r1_rule DTBI840-IE11 CCI-000381 MEDIUM Cross-Site Scripting Filter must be enforced (Internet zone). The Cross-Site Scripting Filter is designed to prevent users from becoming victims of unintentional information disclosure. This setting controls if the Cross-Site Scripting (XSS) Filter detects and prevents cross-site script injection into websites in this zone. If you enable this policy setting, the XSS Filter will be enabled for sites in this zone, and the XSS Filter will attempt to block cross-site script injections. If you disable this policy setting, the XSS Filter will be disabled for sites in this zone, and Internet Explorer will permit cross-site script injections.ECSC-1
SV-59749r1_rule DTBI850-IE11 CCI-000381 MEDIUM Scripting of Internet Explorer WebBrowser Control must be disallowed (Restricted Sites zone). This policy setting controls whether a page may control embedded WebBrowser Control via script. Scripted code hosted on sites located in this zone is more likely to contain malicious code. If you enable this policy setting, script access to the WebBrowser Control is allowed. If you disable this policy setting, script access to the WebBrowser Control is not allowed. If you do not configure this policy setting, script access to the WebBrowser Control can be enabled or disabled by the user. By default, script access to the WebBrowser Control is only allowed in the Local Machine and Intranet Zones.ECSC-1
SV-59751r1_rule DTBI860-IE11 CCI-000381 MEDIUM When uploading files to a server, the local directory path must be excluded (Restricted Sites zone). This policy setting controls whether or not the local path information will be sent when uploading a file via a HTML form. If the local path information is sent, some information may be unintentionally revealed to the server. If you do not configure this policy setting, the user can choose whether path information will be sent when uploading a file via a form. By default, path information will be sent.ECSC-1
SV-59755r1_rule DTBI870-IE11 CCI-001274 MEDIUM Security Warning for unsafe files must be disallowed (Restricted Sites zone). This policy setting controls whether or not the 'Open File - Security Warning' message appears when the user tries to open executable files or other potentially unsafe files (from an intranet file shared by using Windows Explorer, for example). If you enable this policy setting and set the drop-down box to "Enable", these files open without a security warning. If you set the drop-down box to "Prompt", a security warning appears before the files open. If you disable this policy these files do not open. If you do not configure this policy setting, the user can configure how the computer handles these files.ECSC-1
SV-59759r1_rule DTBI880-IE11 CCI-001170 MEDIUM ActiveX controls without prompt property must be used in approved domains only (Restricted Sites zone). This policy setting controls whether or not the user is prompted to allow ActiveX controls to run on websites other than the website that installed the ActiveX control. If the user were to disable the setting for the zone, malicious ActiveX controls could be executed without the user's knowledge. Disabling this setting would allow the possibility for malicious ActiveX controls to be executed from non-approved domains within this zone without the user's knowledge. Enabling this setting enforces the default value and prohibits the user from changing the value. Websites should be moved into another zone if permissions need to be changed.ECSC-1
SV-59761r1_rule DTBI890-IE11 CCI-000381 MEDIUM Cross-Site Scripting Filter property must be enforced (Restricted Sites zone). The Cross-Site Scripting Filter is designed to prevent users from becoming victims of unintentional information disclosure. This setting controls if the Cross-Site Scripting (XSS) Filter detects and prevents cross-site script injection into websites in this zone. If you enable this policy setting, the XSS Filter will be enabled for sites in this zone, and the XSS Filter will attempt to block cross-site script injections. If you disable this policy setting, the XSS Filter will be disabled for sites in this zone, and Internet Explorer will permit cross-site script injections.ECSC-1
SV-59763r1_rule DTBI900-IE11 CCI-001695 MEDIUM Internet Explorer Processes Restrict ActiveX Install must be enforced (Reserved). Users often choose to install software such as ActiveX controls that are not permitted by their organization's security policy. Such software can pose significant security and privacy risks to networks. This policy setting enables blocking of ActiveX control installation prompts for Internet Explorer processes. If you enable this policy setting, prompts for ActiveX control installations will be blocked for Internet Explorer processes. If you disable this policy setting, prompts for ActiveX control installations will not be blocked and these prompts will be displayed to users. If you do not configure this policy setting, the user's preference will be used to determine whether to block ActiveX control installations for Internet Explorer processes.ECSC-1
SV-59769r1_rule DTBI910-IE11 CCI-000381 MEDIUM Status bar updates via script must be disallowed (Internet zone). This policy setting allows you to manage whether script is allowed to update the status bar within the zone. A script running in the zone could cause false information to be displayed on the status bar, which could confuse the user and cause them to perform an undesirable action. If you enable this policy setting, script is allowed to update the status bar. If you disable this policy setting, script is not allowed to update the status bar. If you do not configure this policy setting, status bar updates via scripts will be disabled.ECSC-1
SV-59773r1_rule DTBI920-IE11 CCI-001687 MEDIUM .NET Framework-reliant components not signed with Authenticode must be disallowed to run (Internet zone). Unsigned components are more likely to contain malicious code and it is more difficult to determine the author of the application - therefore they should be avoided if possible. This policy setting allows you to manage whether .NET Framework components that are not signed with Authenticode can be executed from Internet Explorer. These components include managed controls referenced from an object tag and managed executables referenced from a link. If you enable this policy setting, Internet Explorer will execute unsigned managed components. If you select "Prompt" in the drop-down box, Internet Explorer will prompt the user to determine whether to execute unsigned managed components. If you disable this policy setting, Internet Explorer will not execute unsigned managed components. If you do not configure this policy setting, Internet Explorer will not execute unsigned managed components.ECSC-1
SV-59787r1_rule DTBI930-IE11 CCI-001687 MEDIUM .NET Framework-reliant components signed with Authenticode must be disallowed to run (Internet zone). It may be possible for someone to host malicious content on a website that takes advantage of these components. This policy setting allows you to manage whether .NET Framework components that are signed with Authenticode can be executed from Internet Explorer. These components include managed controls referenced from an object tag and managed executables referenced from a link. If you enable this policy setting, Internet Explorer will execute signed managed components. If you select "Prompt" in the drop-down box, Internet Explorer will prompt the user to determine whether to execute signed managed components. If you disable this policy setting, Internet Explorer will not execute signed managed components. If you do not configure this policy setting, Internet Explorer will not execute signed managed components.ECSC-1
SV-59793r1_rule DTBI940-IE11 CCI-000381 MEDIUM Scriptlets must be disallowed (Restricted Sites zone). This policy setting allows you to manage whether scriptlets can be allowed. Scriptlets hosted on sites located in this zone are more likely to contain malicious code. If you enable this policy setting, users will be able to run scriptlets. If you disable this policy setting, users will not be able to run scriptlets. If you do not configure this policy setting, a scriptlet can be enabled or disabled by the user.ECSC-1
SV-59805r1_rule DTBI950-IE11 CCI-000381 MEDIUM Status bar updates via script must be disallowed (Restricted Sites zone). A script running in the zone could cause false information to be displayed on the status bar, which could confuse the user and cause an undesirable action. This policy setting allows you to manage whether script is allowed to update the status bar within the zone. If you enable this policy setting, script is allowed to update the status bar. If you disable this policy setting, script is not allowed to update the status bar. If you do not configure this policy setting, status bar updates via scripts will be disabled.ECSC-1
SV-59841r1_rule DTBI985-IE11 CCI-001687 MEDIUM When Enhanced Protected Mode is enabled, ActiveX controls must be disallowed to run in Protected Mode. This setting prevents ActiveX controls from running in Protected Mode when Enhanced Protected Mode is enabled. When a user has an ActiveX control installed that is not compatible with Enhanced Protected Mode and a website attempts to load the control, Internet Explorer notifies the user and gives the option to run the website in regular Protected Mode. This policy setting disables this notification and forces all websites to run in Enhanced Protected Mode. Enhanced Protected Mode provides additional protection against malicious websites by using 64-bit processes on 64-bit versions of Windows. For computers running at least Windows 8, Enhanced Protected Mode also limits the locations Internet Explorer can read from in the registry and the file system. If you enable this policy setting, Internet Explorer will not give the user the option to disable Enhanced Protected Mode. All Protected Mode websites will run in Enhanced Protected Mode. If you disable or do not configure this policy setting, Internet Explorer notifies users and provides an option to run websites with incompatible ActiveX controls in regular Protected Mode.ECSC-1
SV-59847r1_rule DTBI990-IE11 CCI-001414 MEDIUM Dragging of content from different domains across windows must be disallowed (Internet zone). This policy setting allows you to set options for dragging content from one domain to a different domain when the source and destination are in different windows. If you enable this policy setting, users can drag content from one domain to a different domain when the source and destination are in different windows. Users cannot change this setting. If you disable this policy setting, users cannot drag content from one domain to a different domain when both the source and destination are in different windows. Users cannot change this setting. If you do not configure this policy setting, users cannot drag content from one domain to a different domain when the source and destination are in different windows. Users can change this setting in the Internet Options dialog box.ECSC-1
SV-59853r2_rule DTBI995-IE11 CCI-001084 MEDIUM Enhanced Protected Mode functionality must be enforced. Enhanced Protected Mode provides additional protection against malicious websites by using 64-bit processes on 64-bit versions of Windows. For computers running at least Windows 8, Enhanced Protected Mode also limits the locations Internet Explorer can read from in the registry and the file system. If you enable this policy setting, Enhanced Protected Mode will be turned on. Any zone that has Protected Mode enabled will use Enhanced Protected Mode. Users will not be able to disable Enhanced Protected Mode. If you disable this policy setting, Enhanced Protected Mode will be turned off. Any zone that has Protected Mode enabled will use the version of Protected Mode introduced in Internet Explorer 7 for Windows Vista. If you do not configure this policy, users will be able to turn on or turn off Enhanced Protected Mode on the "Advanced" tab of the Internet Options dialog box.ECSC-1
SV-59861r1_rule DTBI356-IE11 CCI-001084 MEDIUM The 64-bit tab processes, when running in Enhanced Protected Mode on 64-bit versions of Windows, must be turned on. This policy setting determines whether Internet Explorer 11 uses 64-bit processes (for greater security) or 32-bit processes (for greater compatibility) when running in Enhanced Protected Mode on 64-bit versions of Windows.Important: Some ActiveX controls and toolbars may not be available when 64-bit processes are used. If you enable this policy setting, Internet Explorer 11 will use 64-bit tab processes when running in Enhanced Protected Mode on 64-bit versions of Windows. If you disable this policy setting, Internet Explorer 11 will use 32-bit tab processes when running in Enhanced Protected Mode on 64-bit versions of Windows. If you don't configure this policy setting, users can turn this feature on or off using Internet Explorer settings. This feature is turned off by default.ECSC-1
SV-59863r1_rule DTBI1046-IE11 CCI-001662 MEDIUM Anti-Malware programs against ActiveX controls must be run for the Internet zone. This policy setting determines whether Internet Explorer runs Anti-Malware programs against ActiveX controls, to check if they're safe to load on pages. If you enable this policy setting, Internet Explorer won't check with your Anti-Malware program to see if it's safe to create an instance of the ActiveX control. If you disable this policy setting, Internet Explorer always checks with your Anti-Malware program to see if it's safe to create an instance of the ActiveX control. If you don't configure this policy setting, Internet Explorer always checks with your Anti-Malware program to see if it's safe to create an instance of the ActiveX control. Users can turn this behavior on or off, using Internet Explorer Security settings.DCMC-1
SV-59865r1_rule DTBI062-IE11 CCI-001662 MEDIUM Anti-Malware programs against ActiveX controls must be run for the Intranet zone. This policy setting determines whether Internet Explorer runs Anti-Malware programs against ActiveX controls, to check if they're safe to load on pages. If you enable this policy setting, Internet Explorer won't check with your Anti-Malware program to see if it's safe to create an instance of the ActiveX control. If you disable this policy setting, Internet Explorer always checks with your Anti-Malware program to see if it's safe to create an instance of the ActiveX control. If you don't configure this policy setting, Internet Explorer won't check with your Anti-Malware program to see if it's safe to create an instance of the ActiveX control. Users can turn this behavior on or off, using Internet Explorer Security settings.DCMC-1
SV-59869r1_rule DTBI426-IE11 CCI-001662 MEDIUM Anti-Malware programs against ActiveX controls must be run for the Local Machine zone. This policy setting determines whether Internet Explorer runs Anti-Malware programs against ActiveX controls, to check if they're safe to load on pages. If you enable this policy setting, Internet Explorer won't check with your Anti-Malware program to see if it's safe to create an instance of the ActiveX control. If you disable this policy setting, Internet Explorer always checks with your Anti-Malware program to see if it's safe to create an instance of the ActiveX control. If you don't configure this policy setting, Internet Explorer won't check with your Anti-Malware program to see if it's safe to create an instance of the ActiveX control. Users can turn this behavior on or off, using Internet Explorer Security settings.DCMC-1
SV-59871r1_rule DTBI1051-IE11 CCI-001662 MEDIUM Anti-Malware programs against ActiveX controls must be run for the Restricted Sites zone. This policy setting determines whether Internet Explorer runs Anti-Malware programs against ActiveX controls, to check if they're safe to load on pages. If you enable this policy setting, Internet Explorer won't check with your Anti-Malware program to see if it's safe to create an instance of the ActiveX control. If you disable this policy setting, Internet Explorer always checks with your Anti-Malware program to see if it's safe to create an instance of the ActiveX control. If you don't configure this policy setting, Internet Explorer always checks with your Anti-Malware program to see if it's safe to create an instance of the ActiveX control. Users can turn this behavior on or off, using Internet Explorer Security settings.DCMC-1
SV-59875r1_rule DTBI092-IE11 CCI-001662 MEDIUM Anti-Malware programs against ActiveX controls must be run for the Trusted Sites zone. This policy setting determines whether Internet Explorer runs Anti-Malware programs against ActiveX controls, to check if they're safe to load on pages. If you enable this policy setting, Internet Explorer won't check with your Anti-Malware program to see if it's safe to create an instance of the ActiveX control. If you disable this policy setting, Internet Explorer always checks with your Anti-Malware program to see if it's safe to create an instance of the ActiveX control. If you don't configure this policy setting, Internet Explorer won't check with your Anti-Malware program to see if it's safe to create an instance of the ActiveX control. Users can turn this behavior on or off, using Internet Explorer Security settings.DCMC-1
SV-79201r1_rule DTBI1060-IE11 CCI-001242 MEDIUM Prevent bypassing SmartScreen Filter warnings must be enabled. This policy setting determines whether the user can bypass warnings from SmartScreen Filter. SmartScreen Filter prevents the user from browsing to or downloading from sites that are known to host malicious content. SmartScreen Filter also prevents the execution of files that are known to be malicious. If you enable this policy setting, SmartScreen Filter warnings block the user. If you disable or do not configure this policy setting, the user can bypass SmartScreen Filter warnings.
SV-79203r1_rule DTBI1065-IE11 CCI-001169 MEDIUM Prevent bypassing SmartScreen Filter warnings about files that are not commonly downloaded from the internet must be enabled. This policy setting determines whether the user can bypass warnings from SmartScreen Filter. SmartScreen Filter warns the user about executable files that Internet Explorer users do not commonly download from the internet. If you enable this policy setting, SmartScreen Filter warnings block the user. If you disable or do not configure this policy setting, the user can bypass SmartScreen Filter warnings.
SV-79205r1_rule DTBI1070-IE11 CCI-001170 MEDIUM Prevent per-user installation of ActiveX controls must be enabled. This policy setting allows you to prevent the installation of ActiveX controls on a per-user basis. If you enable this policy setting, ActiveX controls cannot be installed on a per-user basis. If you disable or do not configure this policy setting, ActiveX controls can be installed on a per-user basis.
SV-79207r1_rule DTBI1075-IE11 CCI-001954 MEDIUM Prevent ignoring certificate errors option must be enabled. This policy setting prevents the user from ignoring Secure Sockets Layer/Transport Layer Security (SSL/TLS) certificate errors that interrupt browsing (such as “expired”, “revoked”, or “name mismatch” errors) in Internet Explorer. If you enable this policy setting, the user cannot continue browsing. If you disable or do not configure this policy setting, the user can choose to ignore certificate errors and continue browsing.
SV-79209r1_rule DTBI1080-IE11 CCI-001242 MEDIUM Turn on SmartScreen Filter scan option for the Internet Zone must be enabled. This policy setting controls whether SmartScreen Filter scans pages in this zone for malicious content. If you enable this policy setting, SmartScreen Filter scans pages in this zone for malicious content. If you disable this policy setting, SmartScreen Filter does not scan pages in this zone for malicious content. If you do not configure this policy setting, the user can choose whether SmartScreen Filter scans pages in this zone for malicious content.
SV-79211r1_rule DTBI1085-IE11 CCI-001242 MEDIUM Turn on SmartScreen Filter scan option for the Restricted Sites Zone must be enabled. This policy setting controls whether SmartScreen Filter scans pages in this zone for malicious content. If you enable this policy setting, SmartScreen Filter scans pages in this zone for malicious content. If you disable this policy setting, SmartScreen Filter does not scan pages in this zone for malicious content. If you do not configure this policy setting, the user can choose whether SmartScreen Filter scans pages in this zone for malicious content.
SV-79213r1_rule DTBI1090-IE11 CCI-001170 MEDIUM The Initialize and script ActiveX controls not marked as safe must be disallowed (Intranet Zone). ActiveX controls that are not marked safe for scripting should not be executed. Although this is not a complete security measure for a control to be marked safe for scripting, if a control is not marked safe, it should not be initialized and executed. This setting causes both unsafe and safe controls to be initialized and scripted, ignoring the Script ActiveX controls marked safe for scripting option. This increases the risk of malicious code being loaded and executed by the browser. If you enable this policy setting, ActiveX controls are run, loaded with parameters and scripted without setting object safety for untrusted data or scripts. If you disable this policy setting, ActiveX controls that cannot be made safe are not loaded with parameters or scripted. This setting is not recommended, except for secure and administered zones.
SV-79215r1_rule DTBI1095-IE11 CCI-001170 MEDIUM The Initialize and script ActiveX controls not marked as safe must be disallowed (Trusted Sites Zone). ActiveX controls that are not marked safe for scripting should not be executed. Although this is not a complete security measure for a control to be marked safe for scripting, if a control is not marked safe, it should not be initialized and executed. This setting causes both unsafe and safe controls to be initialized and scripted, ignoring the Script ActiveX controls marked safe for scripting option. This increases the risk of malicious code being loaded and executed by the browser. If you enable this policy setting, ActiveX controls are run, loaded with parameters and scripted without setting object safety for untrusted data or scripts. If you disable this policy setting, ActiveX controls that cannot be made safe are not loaded with parameters or scripted. This setting is not recommended, except for secure and administered zones.
SV-79219r3_rule DTBI1100-IE11 CCI-002450 MEDIUM Allow Fallback to SSL 3.0 (Internet Explorer) must be disabled. This parameter ensures only DoD-approved ciphers and algorithms are enabled for use by the web browser by blocking an insecure fallback to SSL when TLS 1.0 or greater fails.
SV-87395r2_rule DTBI1105-IE11 CCI-000381 MEDIUM Run once selection for running outdated ActiveX controls must be disabled. This feature keeps ActiveX controls up to date and helps make them safer to use in Internet Explorer. Many ActiveX controls are not automatically updated as new versions are released. It is very important to keep ActiveX controls up to date because malicious or compromised webpages can target security flaws in out-of-date ActiveX controls.
SV-87397r2_rule DTBI1110-IE11 CCI-000381 MEDIUM Enabling outdated ActiveX controls for Internet Explorer must be blocked. This feature keeps ActiveX controls up to date and helps make them safer to use in Internet Explorer. Many ActiveX controls are not automatically updated as new versions are released. It is very important to keep ActiveX controls up to date because malicious or compromised webpages can target security flaws in out-of-date ActiveX controls.
SV-87399r2_rule DTBI1115-IE11 CCI-000381 MEDIUM Use of the Tabular Data Control (TDC) ActiveX control must be disabled for the Internet Zone. This policy setting determines whether users can run the Tabular Data Control (TDC) ActiveX control, based on security zone. By default, the TDC ActiveX Control is disabled in the Internet and Restricted Sites security zones. If you enable this policy setting, users will not be able to run the TDC ActiveX control from all sites in the specified zone.
SV-87401r2_rule DTBI1120-IE11 CCI-000381 MEDIUM Use of the Tabular Data Control (TDC) ActiveX control must be disabled for the Restricted Sites Zone. This policy setting determines whether users can run the Tabular Data Control (TDC) ActiveX control, based on security zone. By default, the TDC ActiveX Control is disabled in the Internet and Restricted Sites security zones. If you enable this policy setting, users won’t be able to run the TDC ActiveX control from all sites in the specified zone.
SV-89849r1_rule DTBI1125-IE11 CCI-001169 MEDIUM VBScript must not be allowed to run in Internet Explorer (Internet zone). This policy setting allows the management of whether VBScript can be run on pages from the specified zone in Internet Explorer. By selecting "Enable" in the drop-down box, VBScript can run without user intervention. By selecting "Prompt" in the drop-down box, users are asked to choose whether to allow VBScript to run. By selecting "Disable" in the drop-down box, VBScript is prevented from running. If this policy setting is not configured or disabled, VBScript will run without user intervention.
SV-89851r1_rule DTBI1130-IE11 CCI-001169 MEDIUM VBScript must not be allowed to run in Internet Explorer (Restricted Sites zone). This policy setting allows the management of whether VBScript can be run on pages from the specified zone in Internet Explorer. By selecting "Enable" in the drop-down box, VBScript can run without user intervention. By selecting "Prompt" in the drop-down box, users are asked to choose whether to allow VBScript to run. By selecting "Disable" in the drop-down box, VBScript is prevented from running. If this policy setting is not configured or disabled, VBScript will run without user intervention.