Cyber Trackr - Free Compliance Library
Cyber Trackr
The Free Compliance Library

Microsoft Windows Server 2022 STIG SCAP Benchmark

  • Version/Release: V1R3
  • Published: 2023-09-11
  • Severity:
  • Sort:
View

Select any old version/release of this SCAP to view the previous requirements

This Security Technical Implementation Guide is published as a tool to improve the security of Department of Defense (DOD) information systems. The requirements are derived from the National Institute of Standards and Technology (NIST) 800-53 and related documents. Comments or proposed revisions to this document should be sent via email to the following address: disa.stig_spt@mail.mil.
b
Windows Server 2022 must be maintained at a supported servicing level.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-00-000100
Vuln IDs
V-254247
Rule IDs
SV-254247r848557_rule
Systems at unsupported servicing levels will not receive security updates for new vulnerabilities, which leave them subject to exploitation. Systems must be maintained at a servicing level supported by the vendor with new security updates.
Fix: F-57683r848556_fix

Update the system to a Version 21H2 (Build 20348.xxx) or greater.

c
Windows Server 2022 local volumes must use a format that supports NTFS attributes.
RMF Control
AC-3
Severity
High
CCI
CCI-000213
Version
WN22-00-000130
Vuln IDs
V-254250
Rule IDs
SV-254250r848566_rule
The ability to set access permissions and auditing is critical to maintaining the security and proper access controls of a system. To support this, volumes must be formatted using a file system that supports NTFS attributes.
Fix: F-57686r848565_fix

Format volumes to use NTFS or ReFS.

b
Windows Server 2022 must not have the Fax Server role installed.
RMF Control
CM-7
Severity
Medium
CCI
CCI-000381
Version
WN22-00-000320
Vuln IDs
V-254269
Rule IDs
SV-254269r848623_rule
Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption or may provide unauthorized access to the system.
Fix: F-57705r848622_fix

Uninstall the "Fax Server" role. Start "Server Manager". Select the server with the role. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "Fax Server" on the "Roles" page. Click "Next" and "Remove" as prompted.

b
Windows Server 2022 must not have the Microsoft FTP service installed unless required by the organization.
RMF Control
CM-7
Severity
Medium
CCI
CCI-000382
Version
WN22-00-000330
Vuln IDs
V-254270
Rule IDs
SV-254270r848626_rule
Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption.
Fix: F-57706r848625_fix

Uninstall the "FTP Server" role. Start "Server Manager". Select the server with the role. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "FTP Server" under "Web Server (IIS)" on the "Roles" page. Click "Next" and "Remove" as prompted.

b
Windows Server 2022 must not have the Peer Name Resolution Protocol installed.
RMF Control
CM-7
Severity
Medium
CCI
CCI-000381
Version
WN22-00-000340
Vuln IDs
V-254271
Rule IDs
SV-254271r848629_rule
Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption or may provide unauthorized access to the system.
Fix: F-57707r848628_fix

Uninstall the "Peer Name Resolution Protocol" feature. Start "Server Manager". Select the server with the feature. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "Peer Name Resolution Protocol" on the "Features" page. Click "Next" and "Remove" as prompted.

b
Windows Server 2022 must not have Simple TCP/IP Services installed.
RMF Control
CM-7
Severity
Medium
CCI
CCI-000381
Version
WN22-00-000350
Vuln IDs
V-254272
Rule IDs
SV-254272r848632_rule
Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption or may provide unauthorized access to the system.
Fix: F-57708r848631_fix

Uninstall the "Simple TCP/IP Services" feature. Start "Server Manager". Select the server with the feature. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "Simple TCP/IP Services" on the "Features" page. Click "Next" and "Remove" as prompted.

b
Windows Server 2022 must not have the Telnet Client installed.
RMF Control
CM-7
Severity
Medium
CCI
CCI-000382
Version
WN22-00-000360
Vuln IDs
V-254273
Rule IDs
SV-254273r848635_rule
Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption or may provide unauthorized access to the system.
Fix: F-57709r848634_fix

Uninstall the "Telnet Client" feature. Start "Server Manager". Select the server with the feature. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "Telnet Client" on the "Features" page. Click "Next" and "Remove" as prompted.

b
Windows Server 2022 must not have the TFTP Client installed.
RMF Control
CM-7
Severity
Medium
CCI
CCI-000381
Version
WN22-00-000370
Vuln IDs
V-254274
Rule IDs
SV-254274r848638_rule
Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption or may provide unauthorized access to the system.
Fix: F-57710r848637_fix

Uninstall the "TFTP Client" feature. Start "Server Manager". Select the server with the feature. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "TFTP Client" on the "Features" page. Click "Next" and "Remove" as prompted.

b
Windows Server 2022 must not the Server Message Block (SMB) v1 protocol installed.
RMF Control
CM-7
Severity
Medium
CCI
CCI-000381
Version
WN22-00-000380
Vuln IDs
V-254275
Rule IDs
SV-254275r848641_rule
SMBv1 is a legacy protocol that uses the MD5 algorithm as part of SMB. MD5 is known to be vulnerable to a number of attacks such as collision and preimage attacks and is not FIPS compliant.
Fix: F-57711r848640_fix

Uninstall the SMBv1 protocol. Open "Windows PowerShell" with elevated privileges (run as administrator). Enter "Uninstall-WindowsFeature -Name FS-SMB1 -Restart". (Omit the Restart parameter if an immediate restart of the system cannot be done.) Alternately: Start "Server Manager". Select the server with the feature. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "SMB 1.0/CIFS File Sharing Support" on the "Features" page. Click "Next" and "Remove" as prompted.

b
Windows Server 2022 must have the Server Message Block (SMB) v1 protocol disabled on the SMB server.
RMF Control
CM-7
Severity
Medium
CCI
CCI-000381
Version
WN22-00-000390
Vuln IDs
V-254276
Rule IDs
SV-254276r848644_rule
SMBv1 is a legacy protocol that uses the MD5 algorithm as part of SMB. MD5 is known to be vulnerable to a number of attacks such as collision and preimage attacks as well as not being FIPS compliant.
Fix: F-57712r848643_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> MS Security Guide >> Configure SMBv1 Server to "Disabled". The system must be restarted for the change to take effect. This policy setting requires the installation of the SecGuide custom templates included with the STIG package. "SecGuide.admx" and "SecGuide.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.

b
Windows Server 2022 must have the Server Message Block (SMB) v1 protocol disabled on the SMB client.
RMF Control
CM-7
Severity
Medium
CCI
CCI-000381
Version
WN22-00-000400
Vuln IDs
V-254277
Rule IDs
SV-254277r848647_rule
SMBv1 is a legacy protocol that uses the MD5 algorithm as part of SMB. MD5 is known to be vulnerable to a number of attacks such as collision and preimage attacks as well as not being FIPS compliant.
Fix: F-57713r848646_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> MS Security Guide >> Configure SMBv1 client driver to "Enabled" with "Disable driver (recommended)" selected for "Configure MrxSmb10 driver". The system must be restarted for the changes to take effect. This policy setting requires the installation of the SecGuide custom templates included with the STIG package. "SecGuide.admx" and "SecGuide.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.

b
Windows Server 2022 must not have Windows PowerShell 2.0 installed.
RMF Control
CM-7
Severity
Medium
CCI
CCI-000381
Version
WN22-00-000410
Vuln IDs
V-254278
Rule IDs
SV-254278r848650_rule
Windows PowerShell 5.x added advanced logging features that can provide additional detail when malware has been run on a system. Disabling the Windows PowerShell 2.0 mitigates against a downgrade attack that evades the Windows PowerShell 5.x script block logging feature.
Fix: F-57714r848649_fix

Uninstall the "Windows PowerShell 2.0 Engine". Start "Server Manager". Select the server with the feature. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "Windows PowerShell 2.0 Engine" under "Windows PowerShell" on the "Features" page. Click "Next" and "Remove" as prompted.

b
Windows Server 2022 account lockout duration must be configured to 15 minutes or greater.
RMF Control
AC-7
Severity
Medium
CCI
CCI-002238
Version
WN22-AC-000010
Vuln IDs
V-254285
Rule IDs
SV-254285r848671_rule
The account lockout feature, when enabled, prevents brute-force password attacks on the system. This parameter specifies the period of time that an account will remain locked after the specified number of failed logon attempts.
Fix: F-57721r848670_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy >> Account lockout duration to "15" minutes or greater. A value of "0" is also acceptable, requiring an administrator to unlock the account.

b
Windows Server 2022 must have the number of allowed bad logon attempts configured to three or less.
RMF Control
AC-7
Severity
Medium
CCI
CCI-000044
Version
WN22-AC-000020
Vuln IDs
V-254286
Rule IDs
SV-254286r848674_rule
The account lockout feature, when enabled, prevents brute-force password attacks on the system. The higher this value is, the less effective the account lockout feature will be in protecting the local system. The number of bad logon attempts must be reasonably small to minimize the possibility of a successful password attack while allowing for honest errors made during normal user logon.
Fix: F-57722r848673_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy >> Account lockout threshold to "3" or fewer invalid logon attempts (excluding "0", which is unacceptable).

b
Windows Server 2022 must have the period of time before the bad logon counter is reset configured to 15 minutes or greater.
RMF Control
AC-7
Severity
Medium
CCI
CCI-000044
Version
WN22-AC-000030
Vuln IDs
V-254287
Rule IDs
SV-254287r848677_rule
The account lockout feature, when enabled, prevents brute-force password attacks on the system. This parameter specifies the period of time that must pass after failed logon attempts before the counter is reset to "0". The smaller this value is, the less effective the account lockout feature will be in protecting the local system.
Fix: F-57723r848676_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy >> Reset account lockout counter after to at least "15" minutes.

b
Windows Server 2022 password history must be configured to 24 passwords remembered.
RMF Control
IA-5
Severity
Medium
CCI
CCI-000200
Version
WN22-AC-000040
Vuln IDs
V-254288
Rule IDs
SV-254288r848680_rule
A system is more vulnerable to unauthorized access when system users recycle the same password several times without being required to change to a unique password on a regularly scheduled basis. This enables users to effectively negate the purpose of mandating periodic password changes. The default value is "24" for Windows domain systems. DoD has decided this is the appropriate value for all Windows systems.
Fix: F-57724r848679_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> Enforce password history to "24" passwords remembered.

b
Windows Server 2022 maximum password age must be configured to 60 days or less.
RMF Control
IA-5
Severity
Medium
CCI
CCI-000199
Version
WN22-AC-000050
Vuln IDs
V-254289
Rule IDs
SV-254289r848683_rule
The longer a password is in use, the greater the opportunity for someone to gain unauthorized knowledge of the passwords. Scheduled changing of passwords hinders the ability of unauthorized system users to crack passwords and gain access to a system.
Fix: F-57725r848682_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> Maximum password age to "60" days or less (excluding "0", which is unacceptable).

b
Windows Server 2022 minimum password age must be configured to at least one day.
RMF Control
IA-5
Severity
Medium
CCI
CCI-000198
Version
WN22-AC-000060
Vuln IDs
V-254290
Rule IDs
SV-254290r848686_rule
Permitting passwords to be changed in immediate succession within the same day allows users to cycle passwords through their history database. This enables users to effectively negate the purpose of mandating periodic password changes.
Fix: F-57726r848685_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> Minimum password age to at least "1" day.

b
Windows Server 2022 minimum password length must be configured to 14 characters.
RMF Control
IA-5
Severity
Medium
CCI
CCI-000205
Version
WN22-AC-000070
Vuln IDs
V-254291
Rule IDs
SV-254291r890539_rule
Information systems not protected with strong password schemes (including passwords of minimum length) provide the opportunity for anyone to crack the password, thus gaining access to the system and compromising the device, information, or the local network.
Fix: F-57727r848688_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> "Minimum password length" to "14" characters.

b
Windows Server 2022 must have the built-in Windows password complexity policy enabled.
RMF Control
IA-5
Severity
Medium
CCI
CCI-000192
Version
WN22-AC-000080
Vuln IDs
V-254292
Rule IDs
SV-254292r848692_rule
The use of complex passwords increases their strength against attack. The built-in Windows password complexity policy requires passwords to contain at least three of the four types of characters (numbers, uppercase and lowercase letters, and special characters) and prevents the inclusion of user names or parts of user names. Satisfies: SRG-OS-000069-GPOS-00037, SRG-OS-000070-GPOS-00038, SRG-OS-000071-GPOS-00039, SRG-OS-000266-GPOS-00101
Fix: F-57728r848691_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> Password must meet complexity requirements to "Enabled".

c
Windows Server 2022 reversible password encryption must be disabled.
RMF Control
IA-5
Severity
High
CCI
CCI-000196
Version
WN22-AC-000090
Vuln IDs
V-254293
Rule IDs
SV-254293r877397_rule
Storing passwords using reversible encryption is essentially the same as storing clear-text versions of the passwords, which are easily compromised. For this reason, this policy must never be enabled.
Fix: F-57729r848694_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> Store passwords using reversible encryption to "Disabled".

b
Windows Server 2022 permissions for the Application event log must prevent access by nonprivileged accounts.
RMF Control
AU-9
Severity
Medium
CCI
CCI-000162
Version
WN22-AU-000030
Vuln IDs
V-254296
Rule IDs
SV-254296r848704_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. The Application event log may be susceptible to tampering if proper permissions are not applied. Satisfies: SRG-OS-000057-GPOS-00027, SRG-OS-000058-GPOS-00028, SRG-OS-000059-GPOS-00029
Fix: F-57732r848703_fix

Configure the permissions on the Application event log file (Application.evtx) to prevent access by nonprivileged accounts. The default permissions listed below satisfy this requirement: Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\System32\winevt\Logs" folder. If the location of the logs has been changed, when adding Eventlog to the permissions, it must be entered as "NT Service\Eventlog".

b
Windows Server 2022 permissions for the Security event log must prevent access by nonprivileged accounts.
RMF Control
AU-9
Severity
Medium
CCI
CCI-000162
Version
WN22-AU-000040
Vuln IDs
V-254297
Rule IDs
SV-254297r848707_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. The Security event log may disclose sensitive information or be susceptible to tampering if proper permissions are not applied. Satisfies: SRG-OS-000057-GPOS-00027, SRG-OS-000058-GPOS-00028, SRG-OS-000059-GPOS-00029
Fix: F-57733r848706_fix

Configure the permissions on the Security event log file (Security.evtx) to prevent access by nonprivileged accounts. The default permissions listed below satisfy this requirement: Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\System32\winevt\Logs" folder. If the location of the logs has been changed, when adding Eventlog to the permissions, it must be entered as "NT Service\Eventlog".

b
Windows Server 2022 permissions for the System event log must prevent access by nonprivileged accounts.
RMF Control
AU-9
Severity
Medium
CCI
CCI-000162
Version
WN22-AU-000050
Vuln IDs
V-254298
Rule IDs
SV-254298r848710_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. The System event log may be susceptible to tampering if proper permissions are not applied. Satisfies: SRG-OS-000057-GPOS-00027, SRG-OS-000058-GPOS-00028, SRG-OS-000059-GPOS-00029
Fix: F-57734r848709_fix

Configure the permissions on the System event log file (System.evtx) to prevent access by nonprivileged accounts. The default permissions listed below satisfy this requirement: Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\System32\winevt\Logs" folder. If the location of the logs has been changed, when adding Eventlog to the permissions, it must be entered as "NT Service\Eventlog".

b
Windows Server 2022 Event Viewer must be protected from unauthorized modification and deletion.
RMF Control
AU-9
Severity
Medium
CCI
CCI-001494
Version
WN22-AU-000060
Vuln IDs
V-254299
Rule IDs
SV-254299r848713_rule
Protecting audit information also includes identifying and protecting the tools used to view and manipulate log data. Therefore, protecting audit tools is necessary to prevent unauthorized operation on audit information. Operating systems providing tools to interface with audit information will leverage user permissions and roles identifying the user accessing the tools and the corresponding rights the user enjoys to make access decisions regarding the modification or deletion of audit tools. Satisfies: SRG-OS-000257-GPOS-00098, SRG-OS-000258-GPOS-00099
Fix: F-57735r848712_fix

Configure the permissions on the "Eventvwr.exe" file to prevent modification by any groups or accounts other than TrustedInstaller. The default permissions listed below satisfy this requirement: TrustedInstaller - Full Control Administrators, SYSTEM, Users, ALL APPLICATION PACKAGES, ALL RESTRICTED APPLICATION PACKAGES - Read & Execute The default location is the "%SystemRoot%\System32" folder.

b
Windows Server 2022 must be configured to audit Account Logon - Credential Validation successes.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000070
Vuln IDs
V-254300
Rule IDs
SV-254300r848716_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Credential Validation records events related to validation tests on credentials for a user account logon.
Fix: F-57736r848715_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Logon >> Audit Credential Validation with "Success" selected.

b
Windows Server 2022 must be configured to audit Account Logon - Credential Validation failures.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000080
Vuln IDs
V-254301
Rule IDs
SV-254301r848719_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Credential Validation records events related to validation tests on credentials for a user account logon.
Fix: F-57737r848718_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Logon >> Audit Credential Validation with "Failure" selected.

b
Windows Server 2022 must be configured to audit Account Management - Other Account Management Events successes.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000090
Vuln IDs
V-254302
Rule IDs
SV-254302r848722_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Other Account Management Events records events such as the access of a password hash or the Password Policy Checking API being called. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000064-GPOS-00033, SRG-OS-000462-GPOS-00206, SRG-OS-000466-GPOS-00210
Fix: F-57738r848721_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> Audit Other Account Management Events with "Success" selected.

b
Windows Server 2022 must be configured to audit Account Management - Security Group Management successes.
RMF Control
AC-2
Severity
Medium
CCI
CCI-000018
Version
WN22-AU-000100
Vuln IDs
V-254303
Rule IDs
SV-254303r848725_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Security Group Management records events such as creating, deleting, or changing security groups, including changes in group members. Satisfies: SRG-OS-000004-GPOS-00004, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000476-GPOS-00221
Fix: F-57739r848724_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> Audit Security Group Management with "Success" selected.

b
Windows Server 2022 must be configured to audit Account Management - User Account Management successes.
RMF Control
AC-2
Severity
Medium
CCI
CCI-000018
Version
WN22-AU-000110
Vuln IDs
V-254304
Rule IDs
SV-254304r848728_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. User Account Management records events such as creating, changing, deleting, renaming, disabling, or enabling user accounts. Satisfies: SRG-OS-000004-GPOS-00004, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000476-GPOS-00221
Fix: F-57740r848727_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> Audit User Account Management with "Success" selected.

b
Windows Server 2022 must be configured to audit Account Management - User Account Management failures.
RMF Control
AC-2
Severity
Medium
CCI
CCI-000018
Version
WN22-AU-000120
Vuln IDs
V-254305
Rule IDs
SV-254305r848731_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. User Account Management records events such as creating, changing, deleting, renaming, disabling, or enabling user accounts. Satisfies: SRG-OS-000004-GPOS-00004, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000476-GPOS-00221
Fix: F-57741r848730_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> Audit User Account Management with "Failure" selected.

b
Windows Server 2022 must be configured to audit Detailed Tracking - Process Creation successes.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000140
Vuln IDs
V-254307
Rule IDs
SV-254307r848737_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Process Creation records events related to the creation of a process and the source. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000471-GPOS-00215
Fix: F-57743r848736_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Detailed Tracking >> Audit Process Creation with "Success" selected.

b
Windows Server 2022 must be configured to audit Logon/Logoff - Account Lockout failures.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000160
Vuln IDs
V-254309
Rule IDs
SV-254309r848743_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Account Lockout events can be used to identify potentially malicious logon attempts. Satisfies: SRG-OS-000240-GPOS-00090, SRG-OS-000470-GPOS-00214
Fix: F-57745r848742_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> Audit Account Lockout with "Failure" selected.

b
Windows Server 2022 must be configured to audit logoff successes.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000180
Vuln IDs
V-254311
Rule IDs
SV-254311r848749_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Logoff records user logoffs. If this is an interactive logoff, it is recorded on the local system. If it is to a network share, it is recorded on the system accessed.
Fix: F-57747r848748_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> Audit Logoff with "Success" selected.

b
Windows Server 2022 must be configured to audit logon successes.
RMF Control
AC-17
Severity
Medium
CCI
CCI-000067
Version
WN22-AU-000190
Vuln IDs
V-254312
Rule IDs
SV-254312r848752_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Logon records user logons. If this is an interactive logon, it is recorded on the local system. If it is to a network share, it is recorded on the system accessed. Satisfies: SRG-OS-000032-GPOS-00013, SRG-OS-000470-GPOS-00214, SRG-OS-000472-GPOS-00217, SRG-OS-000473-GPOS-00218, SRG-OS-000475-GPOS-00220
Fix: F-57748r848751_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> Audit Logon with "Success" selected.

b
Windows Server 2022 must be configured to audit logon failures.
RMF Control
AC-17
Severity
Medium
CCI
CCI-000067
Version
WN22-AU-000200
Vuln IDs
V-254313
Rule IDs
SV-254313r848755_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Logon records user logons. If this is an interactive logon, it is recorded on the local system. If it is to a network share, it is recorded on the system accessed. Satisfies: SRG-OS-000032-GPOS-00013, SRG-OS-000470-GPOS-00214, SRG-OS-000472-GPOS-00217, SRG-OS-000473-GPOS-00218, SRG-OS-000475-GPOS-00220
Fix: F-57749r848754_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> Audit Logon with "Failure" selected.

b
Windows Server 2022 must be configured to audit Logon/Logoff - Special Logon successes.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000210
Vuln IDs
V-254314
Rule IDs
SV-254314r848758_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Special Logon records special logons that have administrative privileges and can be used to elevate processes. Satisfies: SRG-OS-000470-GPOS-00214, SRG-OS-000472-GPOS-00217, SRG-OS-000473-GPOS-00218, SRG-OS-000475-GPOS-00220
Fix: F-57750r848757_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> Audit Special Logon with "Success" selected.

b
Windows Server 2022 must be configured to audit Object Access - Other Object Access Events successes.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000220
Vuln IDs
V-254315
Rule IDs
SV-254315r848761_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Auditing for other object access records events related to the management of task scheduler jobs and COM+ objects.
Fix: F-57751r848760_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Object Access >> Audit Other Object Access Events with "Success" selected.

b
Windows Server 2022 must be configured to audit Object Access - Other Object Access Events failures.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000230
Vuln IDs
V-254316
Rule IDs
SV-254316r848764_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Auditing for other object access records events related to the management of task scheduler jobs and COM+ objects.
Fix: F-57752r848763_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Object Access >> Audit Other Object Access Events with "Failure" selected.

b
Windows Server 2022 must be configured to audit Policy Change - Audit Policy Change successes.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000260
Vuln IDs
V-254319
Rule IDs
SV-254319r848773_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Policy Change records events related to changes in audit policy. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Fix: F-57755r848772_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Policy Change >> Audit Audit Policy Change with "Success" selected.

b
Windows Server 2022 must be configured to audit Policy Change - Audit Policy Change failures.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000270
Vuln IDs
V-254320
Rule IDs
SV-254320r848776_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Policy Change records events related to changes in audit policy. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Fix: F-57756r848775_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Policy Change >> Audit Audit Policy Change with "Failure" selected.

b
Windows Server 2022 must be configured to audit Policy Change - Authentication Policy Change successes.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000280
Vuln IDs
V-254321
Rule IDs
SV-254321r848779_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Authentication Policy Change records events related to changes in authentication policy, including Kerberos policy and Trust changes. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000064-GPOS-00033, SRG-OS-000462-GPOS-00206, SRG-OS-000466-GPOS-00210
Fix: F-57757r848778_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Policy Change >> Audit Authentication Policy Change with "Success" selected.

b
Windows Server 2022 must be configured to audit Policy Change - Authorization Policy Change successes.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000290
Vuln IDs
V-254322
Rule IDs
SV-254322r848782_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Authorization Policy Change records events related to changes in user rights, such as "Create a token object". Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000064-GPOS-00033, SRG-OS-000462-GPOS-00206, SRG-OS-000466-GPOS-00210
Fix: F-57758r848781_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Policy Change >> Audit Authorization Policy Change with "Success" selected.

b
Windows Server 2022 must be configured to audit Privilege Use - Sensitive Privilege Use successes.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000300
Vuln IDs
V-254323
Rule IDs
SV-254323r848785_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Sensitive Privilege Use records events related to use of sensitive privileges, such as "Act as part of the operating system" or "Debug programs". Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000064-GPOS-00033, SRG-OS-000462-GPOS-00206, SRG-OS-000466-GPOS-00210
Fix: F-57759r848784_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Privilege Use >> Audit Sensitive Privilege Use with "Success" selected.

b
Windows Server 2022 must be configured to audit Privilege Use - Sensitive Privilege Use failures.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000310
Vuln IDs
V-254324
Rule IDs
SV-254324r848788_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Sensitive Privilege Use records events related to use of sensitive privileges, such as "Act as part of the operating system" or "Debug programs". Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000064-GPOS-00033, SRG-OS-000462-GPOS-00206, SRG-OS-000466-GPOS-00210
Fix: F-57760r848787_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Privilege Use >> Audit Sensitive Privilege Use with "Failure" selected.

b
Windows Server 2022 must be configured to audit System - IPsec Driver successes.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000320
Vuln IDs
V-254325
Rule IDs
SV-254325r848791_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. IPsec Driver records events related to the IPsec Driver, such as dropped packets. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Fix: F-57761r848790_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> Audit IPsec Driver with "Success" selected.

b
Windows Server 2022 must be configured to audit System - IPsec Driver failures.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000330
Vuln IDs
V-254326
Rule IDs
SV-254326r848794_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. IPsec Driver records events related to the IPsec Driver, such as dropped packets. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Fix: F-57762r848793_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> Audit IPsec Driver with "Failure" selected.

b
Windows Server 2022 must be configured to audit System - Other System Events successes.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000340
Vuln IDs
V-254327
Rule IDs
SV-254327r848797_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Other System Events records information related to cryptographic key operations and the Windows Firewall service. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Fix: F-57763r848796_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> Audit Other System Events with "Success" selected.

b
Windows Server 2022 must be configured to audit System - Other System Events failures.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000350
Vuln IDs
V-254328
Rule IDs
SV-254328r848800_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Other System Events records information related to cryptographic key operations and the Windows Firewall service. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Fix: F-57764r848799_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> Audit Other System Events with "Failure" selected.

b
Windows Server 2022 must be configured to audit System - Security State Change successes.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000360
Vuln IDs
V-254329
Rule IDs
SV-254329r848803_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Security State Change records events related to changes in the security state, such as startup and shutdown of the system. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Fix: F-57765r848802_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> Audit Security State Chang with "Success" selected.

b
Windows Server 2022 must be configured to audit System - Security System Extension successes.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000370
Vuln IDs
V-254330
Rule IDs
SV-254330r848806_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Security System Extension records events related to extension code being loaded by the security subsystem. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Fix: F-57766r848805_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> Audit Security System Extension with "Success" selected.

b
Windows Server 2022 must be configured to audit System - System Integrity successes.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000380
Vuln IDs
V-254331
Rule IDs
SV-254331r848809_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. System Integrity records events related to violations of integrity to the security subsystem. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000471-GPOS-00215, SRG-OS-000471-GPOS-00216, SRG-OS-000477-GPOS-00222
Fix: F-57767r848808_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> Audit System Integrity with "Success" selected.

b
Windows Server 2022 must be configured to audit System - System Integrity failures.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-AU-000390
Vuln IDs
V-254332
Rule IDs
SV-254332r848812_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. System Integrity records events related to violations of integrity to the security subsystem. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000471-GPOS-00215, SRG-OS-000471-GPOS-00216, SRG-OS-000477-GPOS-00222
Fix: F-57768r848811_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> Audit System Integrity with "Failure" selected.

b
Windows Server 2022 must prevent the display of slide shows on the lock screen.
RMF Control
CM-7
Severity
Medium
CCI
CCI-000381
Version
WN22-CC-000010
Vuln IDs
V-254333
Rule IDs
SV-254333r848815_rule
Slide shows that are displayed on the lock screen could display sensitive information to unauthorized personnel. Turning off this feature will limit access to the information to a logged-on user.
Fix: F-57769r848814_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Control Panel >> Personalization >> Prevent enabling lock screen slide show to "Enabled".

b
Windows Server 2022 must have WDigest Authentication disabled.
RMF Control
CM-7
Severity
Medium
CCI
CCI-000381
Version
WN22-CC-000020
Vuln IDs
V-254334
Rule IDs
SV-254334r848818_rule
When the WDigest Authentication protocol is enabled, plain-text passwords are stored in the Local Security Authority Subsystem Service (LSASS), exposing them to theft. WDigest is disabled by default in Windows Server 2022. This setting ensures this is enforced.
Fix: F-57770r848817_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> MS Security Guide . Set "WDigest Authentication (disabling may require KB2871997)" to "Disabled". This policy setting requires the installation of the SecGuide custom templates included with the STIG package. "SecGuide.admx" and " SecGuide.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.

a
Windows Server 2022 Internet Protocol version 6 (IPv6) source routing must be configured to the highest protection level to prevent IP source routing.
RMF Control
CM-6
Severity
Low
CCI
CCI-000366
Version
WN22-CC-000030
Vuln IDs
V-254335
Rule IDs
SV-254335r848821_rule
Configuring the system to disable IPv6 source routing protects against spoofing.
Fix: F-57771r848820_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> MSS (Legacy) >> MSS: (DisableIPSourceRouting IPv6) IP source routing protection level (protects against packet spoofing) to "Enabled" with "Highest protection, source routing is completely disabled" selected. This policy setting requires the installation of the MSS-Legacy custom templates included with the STIG package. "MSS-Legacy.admx" and "MSS-Legacy.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.

a
Windows Server 2022 source routing must be configured to the highest protection level to prevent Internet Protocol (IP) source routing.
RMF Control
CM-6
Severity
Low
CCI
CCI-000366
Version
WN22-CC-000040
Vuln IDs
V-254336
Rule IDs
SV-254336r848824_rule
Configuring the system to disable IP source routing protects against spoofing.
Fix: F-57772r848823_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> MSS (Legacy) >> MSS: (DisableIPSourceRouting) IP source routing protection level (protects against packet spoofing) to "Enabled" with "Highest protection, source routing is completely disabled" selected. This policy setting requires the installation of the MSS-Legacy custom templates included with the STIG package. "MSS-Legacy.admx" and "MSS-Legacy.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.

a
Windows Server 2022 must be configured to prevent Internet Control Message Protocol (ICMP) redirects from overriding Open Shortest Path First (OSPF)-generated routes.
RMF Control
CM-6
Severity
Low
CCI
CCI-000366
Version
WN22-CC-000050
Vuln IDs
V-254337
Rule IDs
SV-254337r848827_rule
Allowing ICMP redirect of routes can lead to traffic not being routed properly. When disabled, this forces ICMP to be routed via the shortest path first.
Fix: F-57773r848826_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> MSS (Legacy) >> MSS: (EnableICMPRedirect) Allow ICMP redirects to override OSPF generated routes to "Disabled". This policy setting requires the installation of the MSS-Legacy custom templates included with the STIG package. "MSS-Legacy.admx" and "MSS-Legacy.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.

a
Windows Server 2022 must be configured to ignore NetBIOS name release requests except from WINS servers.
RMF Control
SC-5
Severity
Low
CCI
CCI-002385
Version
WN22-CC-000060
Vuln IDs
V-254338
Rule IDs
SV-254338r848830_rule
Configuring the system to ignore name release requests, except from WINS servers, prevents a denial of service (DoS) attack. The DoS consists of sending a NetBIOS name release request to the server for each entry in the server's cache, causing a response delay in the normal operation of the server's WINS resolution capability.
Fix: F-57774r848829_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> MSS (Legacy) >> MSS: (NoNameReleaseOnDemand) Allow the computer to ignore NetBIOS name release requests except from WINS servers to "Enabled". This policy setting requires the installation of the MSS-Legacy custom templates included with the STIG package. "MSS-Legacy.admx" and "MSS-Legacy.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.

b
Windows Server 2022 insecure logons to an SMB server must be disabled.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-CC-000070
Vuln IDs
V-254339
Rule IDs
SV-254339r848833_rule
Insecure guest logons allow unauthenticated access to shared folders. Shared resources on a system must require authentication to establish proper access.
Fix: F-57775r848832_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Network >> Lanman Workstation >> Enable insecure guest logons to "Disabled".

b
Windows Server 2022 hardened Universal Naming Convention (UNC) paths must be defined to require mutual authentication and integrity for at least the \\*\SYSVOL and \\*\NETLOGON shares.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-CC-000080
Vuln IDs
V-254340
Rule IDs
SV-254340r848836_rule
Additional security requirements are applied to UNC paths specified in hardened UNC paths before allowing access to them. This aids in preventing tampering with or spoofing of connections to these paths.
Fix: F-57776r848835_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Network >> Network Provider >> Hardened UNC Paths" to "Enabled" with at least the following configured in "Hardened UNC Paths" (click the "Show" button to display): Value Name: \\*\SYSVOL Value: RequireMutualAuthentication=1, RequireIntegrity=1 Value Name: \\*\NETLOGON Value: RequireMutualAuthentication=1, RequireIntegrity=1

b
Windows Server 2022 command line data must be included in process creation events.
RMF Control
AU-3
Severity
Medium
CCI
CCI-000135
Version
WN22-CC-000090
Vuln IDs
V-254341
Rule IDs
SV-254341r848839_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Enabling "Include command line data for process creation events" will record the command line information with the process creation events in the log. This can provide additional detail when malware has run on a system.
Fix: F-57777r848838_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Audit Process Creation >> Include command line in process creation events to "Enabled".

b
Windows Server 2022 must be configured to enable Remote host allows delegation of nonexportable credentials.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-CC-000100
Vuln IDs
V-254342
Rule IDs
SV-254342r848842_rule
An exportable version of credentials is provided to remote hosts when using credential delegation which exposes them to theft on the remote host. Restricted Admin mode or Remote Credential Guard allow delegation of nonexportable credentials providing additional protection of the credentials. Enabling this configures the host to support Restricted Admin mode or Remote Credential Guard.
Fix: F-57778r848841_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Credentials Delegation >> Remote host allows delegation of nonexportable credentials to "Enabled".

b
Windows Server 2022 Early Launch Antimalware, Boot-Start Driver Initialization Policy must prevent boot drivers identified as bad.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-CC-000130
Vuln IDs
V-254344
Rule IDs
SV-254344r848848_rule
Compromised boot drivers can introduce malware prior to protection mechanisms that load after initialization. The Early Launch Antimalware driver can limit allowed drivers based on classifications determined by the malware protection application. At a minimum, drivers determined to be bad must not be allowed.
Fix: F-57780r848847_fix

The default behavior is for Early Launch Antimalware - Boot-Start Driver Initialization policy to enforce "Good, unknown and bad but critical" (preventing "bad"). If this needs to be corrected or a more secure setting is desired, configure the policy value for Computer Configuration >> Administrative Templates >> System >> Early Launch Antimalware >> Boot-Start Driver Initialization Policy to "Not Configured" or "Enabled" with any option other than "All" selected.

b
Windows Server 2022 group policy objects must be reprocessed even if they have not changed.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-CC-000140
Vuln IDs
V-254345
Rule IDs
SV-254345r848851_rule
Registry entries for group policy settings can potentially be changed from the required configuration. This could occur as part of troubleshooting or by a malicious process on a compromised system. Enabling this setting and then selecting the "Process even if the Group Policy objects have not changed" option ensures the policies will be reprocessed even if none have been changed. This way, any unauthorized changes are forced to match the domain-based group policy settings again.
Fix: F-57781r848850_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Group Policy >> Configure registry policy processing to "Enabled" with the option "Process even if the Group Policy objects have not changed" selected.

b
Windows Server 2022 downloading print driver packages over HTTP must be turned off.
RMF Control
CM-7
Severity
Medium
CCI
CCI-000381
Version
WN22-CC-000150
Vuln IDs
V-254346
Rule IDs
SV-254346r848854_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and will prevent uncontrolled updates to the system. This setting prevents the computer from downloading print driver packages over HTTP.
Fix: F-57782r848853_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Internet Communication Management >> Internet Communication settings >> Turn off downloading of print drivers over HTTP to "Enabled".

b
Windows Server 2022 printing over HTTP must be turned off.
RMF Control
CM-7
Severity
Medium
CCI
CCI-000381
Version
WN22-CC-000160
Vuln IDs
V-254347
Rule IDs
SV-254347r848857_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and will prevent uncontrolled updates to the system. This setting prevents the client computer from printing over HTTP, which allows the computer to print to printers on the intranet as well as the internet.
Fix: F-57783r848856_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Internet Communication Management >> Internet Communication settings >> Turn off printing over HTTP to "Enabled".

b
Windows Server 2022 network selection user interface (UI) must not be displayed on the logon screen.
RMF Control
CM-7
Severity
Medium
CCI
CCI-000381
Version
WN22-CC-000170
Vuln IDs
V-254348
Rule IDs
SV-254348r848860_rule
Enabling interaction with the network selection UI allows users to change connections to available networks without signing in to Windows.
Fix: F-57784r848859_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Logon >> Do not display network selection UI to "Enabled".

b
Windows Server 2022 users must be prompted to authenticate when the system wakes from sleep (on battery).
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-CC-000180
Vuln IDs
V-254349
Rule IDs
SV-254349r848863_rule
A system that does not require authentication when resuming from sleep may provide access to unauthorized users. Authentication must always be required when accessing a system. This setting ensures users are prompted for a password when the system wakes from sleep (on battery).
Fix: F-57785r848862_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Power Management >> Sleep Settings >> Require a password when a computer wakes (on battery) to "Enabled".

b
Windows Server 2022 users must be prompted to authenticate when the system wakes from sleep (plugged in).
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-CC-000190
Vuln IDs
V-254350
Rule IDs
SV-254350r848866_rule
A system that does not require authentication when resuming from sleep may provide access to unauthorized users. Authentication must always be required when accessing a system. This setting ensures users are prompted for a password when the system wakes from sleep (plugged in).
Fix: F-57786r848865_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Power Management >> Sleep Settings >> Require a password when a computer wakes (plugged in) to "Enabled".

a
Windows Server 2022 Application Compatibility Program Inventory must be prevented from collecting data and sending the information to Microsoft.
RMF Control
CM-7
Severity
Low
CCI
CCI-000381
Version
WN22-CC-000200
Vuln IDs
V-254351
Rule IDs
SV-254351r848869_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and will prevent uncontrolled updates to the system. This setting will prevent the Program Inventory from collecting data about a system and sending the information to Microsoft.
Fix: F-57787r848868_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Application Compatibility >> Turn off Inventory Collector to "Enabled".

c
Windows Server 2022 Autoplay must be turned off for nonvolume devices.
RMF Control
CM-7
Severity
High
CCI
CCI-001764
Version
WN22-CC-000210
Vuln IDs
V-254352
Rule IDs
SV-254352r848872_rule
Allowing AutoPlay to execute may introduce malicious code to a system. AutoPlay begins reading from a drive as soon as media is inserted into the drive. As a result, the setup file of programs or music on audio media may start. This setting will disable AutoPlay for nonvolume devices, such as Media Transfer Protocol (MTP) devices.
Fix: F-57788r848871_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> AutoPlay Policies >> Disallow Autoplay for nonvolume devices to "Enabled".

c
Windows Server 2022 default AutoRun behavior must be configured to prevent AutoRun commands.
RMF Control
CM-7
Severity
High
CCI
CCI-001764
Version
WN22-CC-000220
Vuln IDs
V-254353
Rule IDs
SV-254353r848875_rule
Allowing AutoRun commands to execute may introduce malicious code to a system. Configuring this setting prevents AutoRun commands from executing.
Fix: F-57789r848874_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> AutoPlay Policies >> Set the default behavior for AutoRun to "Enabled" with "Do not execute any autorun commands" selected.

c
Windows Server 2022 AutoPlay must be disabled for all drives.
RMF Control
CM-7
Severity
High
CCI
CCI-001764
Version
WN22-CC-000230
Vuln IDs
V-254354
Rule IDs
SV-254354r848878_rule
Allowing AutoPlay to execute may introduce malicious code to a system. AutoPlay begins reading from a drive as soon media is inserted into the drive. As a result, the setup file of programs or music on audio media may start. By default, AutoPlay is disabled on removable drives, such as the floppy disk drive (but not the CD-ROM drive) and on network drives. Enabling this policy disables AutoPlay on all drives.
Fix: F-57790r848877_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> AutoPlay Policies >> Turn off AutoPlay to "Enabled" with "All Drives" selected.

b
Windows Server 2022 administrator accounts must not be enumerated during elevation.
RMF Control
SC-3
Severity
Medium
CCI
CCI-001084
Version
WN22-CC-000240
Vuln IDs
V-254355
Rule IDs
SV-254355r848881_rule
Enumeration of administrator accounts when elevating can provide part of the logon information to an unauthorized user. This setting configures the system to always require users to type in a username and password to elevate a running application.
Fix: F-57791r848880_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Credential User Interface >> Enumerate administrator accounts on elevation to "Disabled".

b
Windows Server 2022 Diagnostic Data must be configured to send "required diagnostic data" or "optional diagnostic data".
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-CC-000250
Vuln IDs
V-254356
Rule IDs
SV-254356r916220_rule
Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Limiting this capability will prevent potentially sensitive information from being sent outside the enterprise. The "send required diagnostic data" option for Allow Diagnostic Data configures the lowest amount of data, effectively none outside of the Malicious Software Removal Tool (MSRT), Defender, and Diagnostic Data client settings. "Optional Diagnostic Data" sends basic diagnostic and usage data and may be required to support some Microsoft services.
Fix: F-57792r902887_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Data Collection and Preview Build >> Allow Diagnostic Data to "Enabled" with "Send required diagnostic data" selected or "Send optional diagnostic data".

a
Windows Server 2022 Windows Update must not obtain updates from other PCs on the internet.
RMF Control
CM-6
Severity
Low
CCI
CCI-000366
Version
WN22-CC-000260
Vuln IDs
V-254357
Rule IDs
SV-254357r890545_rule
Windows Update can obtain updates from additional sources instead of Microsoft. In addition to Microsoft, updates can be obtained from and sent to PCs on the local network as well as on the internet. This is part of the Windows Update trusted process; however, to minimize outside exposure, obtaining updates from or sending to systems on the internet must be prevented.
Fix: F-57793r890544_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Delivery Optimization >> Download Mode to "Enabled" with any option except "Internet" selected. Acceptable selections include: HTTP only (0) LAN (1) Group (2) Internet (3) Simple (99)

b
Windows Server 2022 Application event log size must be configured to 32768 KB or greater.
RMF Control
AU-4
Severity
Medium
CCI
CCI-001849
Version
WN22-CC-000270
Vuln IDs
V-254358
Rule IDs
SV-254358r877391_rule
Inadequate log size will cause the log to fill up quickly. This may prevent audit events from being recorded properly and require frequent attention by administrative personnel.
Fix: F-57794r848889_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Event Log Service >> Application >> Specify the maximum log file size (KB) to "Enabled" with a "Maximum Log Size (KB)" of "32768" or greater.

b
Windows Server 2022 Security event log size must be configured to 196608 KB or greater.
RMF Control
AU-4
Severity
Medium
CCI
CCI-001849
Version
WN22-CC-000280
Vuln IDs
V-254359
Rule IDs
SV-254359r877391_rule
Inadequate log size will cause the log to fill up quickly. This may prevent audit events from being recorded properly and require frequent attention by administrative personnel.
Fix: F-57795r848892_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Event Log Service >> Security >> Specify the maximum log file size (KB) to "Enabled" with a "Maximum Log Size (KB)" of "196608" or greater.

b
Windows Server 2022 System event log size must be configured to 32768 KB or greater.
RMF Control
AU-4
Severity
Medium
CCI
CCI-001849
Version
WN22-CC-000290
Vuln IDs
V-254360
Rule IDs
SV-254360r877391_rule
Inadequate log size will cause the log to fill up quickly. This may prevent audit events from being recorded properly and require frequent attention by administrative personnel.
Fix: F-57796r848895_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Event Log Service >> System >> Specify the maximum log file size (KB) to "Enabled" with a "Maximum Log Size (KB)" of "32768" or greater.

b
Windows Server 2022 Microsoft Defender antivirus SmartScreen must be enabled.
RMF Control
CM-7
Severity
Medium
CCI
CCI-000381
Version
WN22-CC-000300
Vuln IDs
V-254361
Rule IDs
SV-254361r848899_rule
Microsoft Defender antivirus SmartScreen helps protect systems from programs downloaded from the internet that may be malicious. Enabling SmartScreen can block potentially malicious programs or warn users.
Fix: F-57797r848898_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> File Explorer >> Configure Windows Defender SmartScreen to "Enabled" with either option "Warn" or "Warn and prevent bypass" selected. Windows Server 2022 includes duplicate policies for this setting. It can also be configured under Computer Configuration >> Administrative Templates >> Windows Components >> Windows Defender SmartScreen >> Explorer.

b
Windows Server 2022 Explorer Data Execution Prevention must be enabled.
RMF Control
SI-16
Severity
Medium
CCI
CCI-002824
Version
WN22-CC-000310
Vuln IDs
V-254362
Rule IDs
SV-254362r848902_rule
Data Execution Prevention provides additional protection by performing checks on memory to help prevent malicious code from running. This setting will prevent Data Execution Prevention from being turned off for File Explorer.
Fix: F-57798r848901_fix

The default behavior is for data execution prevention to be turned on for File Explorer. If this needs to be corrected, configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> File Explorer >> Turn off Data Execution Prevention for Explorer to "Not Configured" or "Disabled".

a
Windows Server 2022 Turning off File Explorer heap termination on corruption must be disabled.
RMF Control
CM-6
Severity
Low
CCI
CCI-000366
Version
WN22-CC-000320
Vuln IDs
V-254363
Rule IDs
SV-254363r848905_rule
Legacy plug-in applications may continue to function when a File Explorer session has become corrupt. Disabling this feature will prevent this.
Fix: F-57799r848904_fix

The default behavior is for File Explorer heap termination on corruption to be disabled. If this needs to be corrected, configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> File Explorer >> Turn off heap termination on corruption to "Not Configured" or "Disabled".

b
Windows Server 2022 File Explorer shell protocol must run in protected mode.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-CC-000330
Vuln IDs
V-254364
Rule IDs
SV-254364r848908_rule
The shell protocol will limit the set of folders that applications can open when run in protected mode. Restricting files an application can open to a limited set of folders increases the security of Windows.
Fix: F-57800r848907_fix

The default behavior is for shell protected mode to be turned on for File Explorer. If this needs to be corrected, configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> File Explorer >> Turn off shell protocol protected mode to "Not Configured" or "Disabled".

b
Windows Server 2022 must not save passwords in the Remote Desktop Client.
RMF Control
IA-11
Severity
Medium
CCI
CCI-002038
Version
WN22-CC-000340
Vuln IDs
V-254365
Rule IDs
SV-254365r848911_rule
Saving passwords in the Remote Desktop Client could allow an unauthorized user to establish a remote desktop session to another system. The system must be configured to prevent users from saving passwords in the Remote Desktop Client. Satisfies: SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157
Fix: F-57801r848910_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Remote Desktop Services >> Remote Desktop Connection Client >> Do not allow passwords to be saved to "Enabled".

b
Windows Server 2022 Remote Desktop Services must prevent drive redirection.
RMF Control
SC-4
Severity
Medium
CCI
CCI-001090
Version
WN22-CC-000350
Vuln IDs
V-254366
Rule IDs
SV-254366r848914_rule
Preventing users from sharing the local drives on their client computers with Remote Session Hosts that they access helps reduce possible exposure of sensitive data.
Fix: F-57802r848913_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Remote Desktop Services >> Remote Desktop Session Host >> Device and Resource Redirection >> Do not allow drive redirection to "Enabled".

b
Windows Server 2022 Remote Desktop Services must always prompt a client for passwords upon connection.
RMF Control
IA-11
Severity
Medium
CCI
CCI-002038
Version
WN22-CC-000360
Vuln IDs
V-254367
Rule IDs
SV-254367r848917_rule
This setting controls the ability of users to supply passwords automatically as part of their remote desktop connection. Disabling this setting would allow anyone to use the stored credentials in a connection item to connect to the terminal server. Satisfies: SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157
Fix: F-57803r848916_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Remote Desktop Services >> Remote Desktop Session Host >> Security >> Always prompt for password upon connection to "Enabled".

b
Windows Server 2022 Remote Desktop Services must require secure Remote Procedure Call (RPC) communications.
RMF Control
AC-17
Severity
Medium
CCI
CCI-000068
Version
WN22-CC-000370
Vuln IDs
V-254368
Rule IDs
SV-254368r877398_rule
Allowing unsecure RPC communication exposes the system to man-in-the-middle attacks and data disclosure attacks. A man-in-the-middle attack occurs when an intruder captures packets between a client and server and modifies them before allowing the packets to be exchanged. Usually the attacker will modify the information in the packets in an attempt to cause either the client or server to reveal sensitive information. Satisfies: SRG-OS-000033-GPOS-00014, SRG-OS-000250-GPOS-00093
Fix: F-57804r848919_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Remote Desktop Services >> Remote Desktop Session Host >> Security >> Require secure RPC communication to "Enabled".

b
Windows Server 2022 Remote Desktop Services must be configured with the client connection encryption set to High Level.
RMF Control
AC-17
Severity
Medium
CCI
CCI-000068
Version
WN22-CC-000380
Vuln IDs
V-254369
Rule IDs
SV-254369r877398_rule
Remote connections must be encrypted to prevent interception of data or sensitive information. Selecting "High Level" will ensure encryption of Remote Desktop Services sessions in both directions. Satisfies: SRG-OS-000033-GPOS-00014, SRG-OS-000250-GPOS-00093
Fix: F-57805r848922_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Remote Desktop Services >> Remote Desktop Session Host >> Security >> Set client connection encryption level to "Enabled" with "High Level" selected.

b
Windows Server 2022 must prevent attachments from being downloaded from RSS feeds.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-CC-000390
Vuln IDs
V-254370
Rule IDs
SV-254370r848926_rule
Attachments from RSS feeds may not be secure. This setting will prevent attachments from being downloaded from RSS feeds.
Fix: F-57806r848925_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> RSS Feeds >> Prevent downloading of enclosures to "Enabled".

b
Windows Server 2022 must disable Basic authentication for RSS feeds over HTTP.
RMF Control
CM-7
Severity
Medium
CCI
CCI-000381
Version
WN22-CC-000400
Vuln IDs
V-254371
Rule IDs
SV-254371r848929_rule
Basic authentication uses plain-text passwords that could be used to compromise a system. Disabling Basic authentication will reduce this potential.
Fix: F-57807r848928_fix

The default behavior is for the Windows RSS platform to not use Basic authentication over HTTP connections. If this needs to be corrected, configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> RSS Feeds >> Turn on Basic feed authentication over HTTP to "Not Configured" or "Disabled".

b
Windows Server 2022 must prevent Indexing of encrypted files.
RMF Control
CM-7
Severity
Medium
CCI
CCI-000381
Version
WN22-CC-000410
Vuln IDs
V-254372
Rule IDs
SV-254372r848932_rule
Indexing of encrypted files may expose sensitive data. This setting prevents encrypted files from being indexed.
Fix: F-57808r848931_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Search >> Allow indexing of encrypted files to "Disabled".

b
Windows Server 2022 must prevent users from changing installation options.
RMF Control
CM-11
Severity
Medium
CCI
CCI-001812
Version
WN22-CC-000420
Vuln IDs
V-254373
Rule IDs
SV-254373r848935_rule
Installation options for applications are typically controlled by administrators. This setting prevents users from changing installation options that may bypass security features.
Fix: F-57809r848934_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Installer >> Allow user control over installs to "Disabled".

c
Windows Server 2022 must disable the Windows Installer Always install with elevated privileges option.
RMF Control
CM-11
Severity
High
CCI
CCI-001812
Version
WN22-CC-000430
Vuln IDs
V-254374
Rule IDs
SV-254374r848938_rule
Standard user accounts must not be granted elevated privileges. Enabling Windows Installer to elevate privileges when installing applications can allow malicious persons and applications to gain full control of a system.
Fix: F-57810r848937_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Installer >> Always install with elevated privileges to "Disabled".

b
Windows Server 2022 users must be notified if a web-based program attempts to install software.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-CC-000440
Vuln IDs
V-254375
Rule IDs
SV-254375r848941_rule
Web-based programs may attempt to install malicious software on a system. Ensuring users are notified if a web-based program attempts to install software allows them to refuse the installation.
Fix: F-57811r848940_fix

The default behavior is for Internet Explorer to warn users and select whether to allow or refuse installation when a web-based program attempts to install software on the system. If this needs to be corrected, configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Installer >> Prevent Internet Explorer security prompt for Windows Installer scripts to "Not Configured" or "Disabled".

b
Windows Server 2022 must disable automatically signing in the last interactive user after a system-initiated restart.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-CC-000450
Vuln IDs
V-254376
Rule IDs
SV-254376r877377_rule
Windows can be configured to automatically sign the user back in after a Windows Update restart. Some protections are in place to help ensure this is done in a secure fashion; however, disabling this will prevent the caching of credentials for this purpose and also ensure the user is aware of the restart.
Fix: F-57812r848943_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Logon Options >> Sign-in and lock last interactive user automatically after a restart to "Disabled".

b
Windows Server 2022 PowerShell script block logging must be enabled.
RMF Control
AU-3
Severity
Medium
CCI
CCI-000135
Version
WN22-CC-000460
Vuln IDs
V-254377
Rule IDs
SV-254377r848947_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Enabling PowerShell script block logging will record detailed information from the processing of PowerShell commands and scripts. This can provide additional detail when malware has run on a system.
Fix: F-57813r848946_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows PowerShell >> Turn on PowerShell Script Block Logging to "Enabled".

c
Windows Server 2022 Windows Remote Management (WinRM) client must not use Basic authentication.
RMF Control
MA-4
Severity
High
CCI
CCI-000877
Version
WN22-CC-000470
Vuln IDs
V-254378
Rule IDs
SV-254378r877395_rule
Basic authentication uses plain-text passwords that could be used to compromise a system. Disabling Basic authentication will reduce this potential.
Fix: F-57814r848949_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Client >> Allow Basic authentication to "Disabled".

b
Windows Server 2022 Windows Remote Management (WinRM) client must not allow unencrypted traffic.
RMF Control
MA-4
Severity
Medium
CCI
CCI-002890
Version
WN22-CC-000480
Vuln IDs
V-254379
Rule IDs
SV-254379r877382_rule
Unencrypted remote access to a system can allow sensitive information to be compromised. Windows remote management connections must be encrypted to prevent this. Satisfies: SRG-OS-000393-GPOS-00173, SRG-OS-000394-GPOS-00174
Fix: F-57815r848952_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Client >> Allow unencrypted traffic to "Disabled".

b
Windows Server 2022 Windows Remote Management (WinRM) client must not use Digest authentication.
RMF Control
MA-4
Severity
Medium
CCI
CCI-000877
Version
WN22-CC-000490
Vuln IDs
V-254380
Rule IDs
SV-254380r877395_rule
Digest authentication is not as strong as other options and may be subject to man-in-the-middle attacks. Disallowing Digest authentication will reduce this potential.
Fix: F-57816r848955_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Client >> Disallow Digest authentication to "Enabled".

c
Windows Server 2022 Windows Remote Management (WinRM) service must not use Basic authentication.
RMF Control
MA-4
Severity
High
CCI
CCI-000877
Version
WN22-CC-000500
Vuln IDs
V-254381
Rule IDs
SV-254381r877395_rule
Basic authentication uses plain-text passwords that could be used to compromise a system. Disabling Basic authentication will reduce this potential.
Fix: F-57817r848958_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Service >> Allow Basic authentication to "Disabled".

b
Windows Server 2022 Windows Remote Management (WinRM) service must not allow unencrypted traffic.
RMF Control
MA-4
Severity
Medium
CCI
CCI-002890
Version
WN22-CC-000510
Vuln IDs
V-254382
Rule IDs
SV-254382r877382_rule
Unencrypted remote access to a system can allow sensitive information to be compromised. Windows remote management connections must be encrypted to prevent this. Satisfies: SRG-OS-000393-GPOS-00173, SRG-OS-000394-GPOS-00174
Fix: F-57818r848961_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Service >> Allow unencrypted traffic to "Disabled".

b
Windows Server 2022 Windows Remote Management (WinRM) service must not store RunAs credentials.
RMF Control
IA-11
Severity
Medium
CCI
CCI-002038
Version
WN22-CC-000520
Vuln IDs
V-254383
Rule IDs
SV-254383r848965_rule
Storage of administrative credentials could allow unauthorized access. Disallowing the storage of RunAs credentials for Windows Remote Management will prevent them from being used with plug-ins. Satisfies: SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157
Fix: F-57819r848964_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Service >> Disallow WinRM from storing RunAs credentials to "Enabled".

b
Windows Server 2022 must have PowerShell Transcription enabled.
RMF Control
AU-3
Severity
Medium
CCI
CCI-000134
Version
WN22-CC-000530
Vuln IDs
V-254384
Rule IDs
SV-254384r848968_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Enabling PowerShell Transcription will record detailed information from the processing of PowerShell commands and scripts. This can provide additional detail when malware has run on a system.
Fix: F-57820r848967_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows PowerShell >> "Turn on PowerShell Transcription" to "Enabled". Specify the Transcript output directory to point to a Central Log Server or another secure location to prevent user access.

b
Windows Server 2022 Kerberos user logon restrictions must be enforced.
RMF Control
IA-2
Severity
Medium
CCI
CCI-001941
Version
WN22-DC-000020
Vuln IDs
V-254386
Rule IDs
SV-254386r848974_rule
This policy setting determines whether the Kerberos Key Distribution Center (KDC) validates every request for a session ticket against the user rights policy of the target computer. The policy is enabled by default, which is the most secure setting for validating that access to target resources is not circumvented. Satisfies: SRG-OS-000112-GPOS-00057, SRG-OS-000113-GPOS-00058
Fix: F-57822r848973_fix

Configure the policy value in the Default Domain Policy for Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy >> Enforce user logon restrictions to "Enabled".

b
Windows Server 2022 Kerberos service ticket maximum lifetime must be limited to 600 minutes or less.
RMF Control
IA-2
Severity
Medium
CCI
CCI-001941
Version
WN22-DC-000030
Vuln IDs
V-254387
Rule IDs
SV-254387r848977_rule
This setting determines the maximum amount of time (in minutes) that a granted session ticket can be used to access a particular service. Session tickets are used only to authenticate new connections with servers. Ongoing operations are not interrupted if the session ticket used to authenticate the connection expires during the connection. Satisfies: SRG-OS-000112-GPOS-00057, SRG-OS-000113-GPOS-00058
Fix: F-57823r848976_fix

Configure the policy value in the Default Domain Policy for Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy >> Maximum lifetime for service ticket to a maximum of "600" minutes, but not "0", which equates to "Ticket doesn't expire".

b
Windows Server 2022 Kerberos user ticket lifetime must be limited to 10 hours or less.
RMF Control
IA-2
Severity
Medium
CCI
CCI-001941
Version
WN22-DC-000040
Vuln IDs
V-254388
Rule IDs
SV-254388r848980_rule
In Kerberos, there are two types of tickets: Ticket Granting Tickets (TGTs) and Service Tickets. Kerberos tickets have a limited lifetime so the time an attacker has to implement an attack is limited. This policy controls how long TGTs can be renewed. With Kerberos, the user's initial authentication to the domain controller results in a TGT, which is then used to request Service Tickets to resources. Upon startup, each computer gets a TGT before requesting a service ticket to the domain controller and any other computers it needs to access. For services that start up under a specified user account, users must always get a TGT first and then get Service Tickets to all computers and services accessed. Satisfies: SRG-OS-000112-GPOS-00057, SRG-OS-000113-GPOS-00058
Fix: F-57824r848979_fix

Configure the policy value in the Default Domain Policy for Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy >> Maximum lifetime for user ticket to a maximum of "10" hours but not "0", which equates to "Ticket doesn't expire".

b
Windows Server 2022 Kerberos policy user ticket renewal maximum lifetime must be limited to seven days or less.
RMF Control
IA-2
Severity
Medium
CCI
CCI-001941
Version
WN22-DC-000050
Vuln IDs
V-254389
Rule IDs
SV-254389r848983_rule
This setting determines the period of time (in days) during which a user's Ticket Granting Ticket (TGT) may be renewed. This security configuration limits the amount of time an attacker has to crack the TGT and gain access. Satisfies: SRG-OS-000112-GPOS-00057, SRG-OS-000113-GPOS-00058
Fix: F-57825r848982_fix

Configure the policy value in the Default Domain Policy for Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy >> Maximum lifetime for user ticket renewal to a maximum of "7" days or less.

b
Windows Server 2022 computer clock synchronization tolerance must be limited to five minutes or less.
RMF Control
IA-2
Severity
Medium
CCI
CCI-001941
Version
WN22-DC-000060
Vuln IDs
V-254390
Rule IDs
SV-254390r848986_rule
This setting determines the maximum time difference (in minutes) that Kerberos will tolerate between the time on a client's clock and the time on a server's clock while still considering the two clocks synchronous. In order to prevent replay attacks, Kerberos uses timestamps as part of its protocol definition. For timestamps to work properly, the clocks of the client and the server need to be in sync as much as possible. Satisfies: SRG-OS-000112-GPOS-00057, SRG-OS-000113-GPOS-00058
Fix: F-57826r848985_fix

Configure the policy value in the Default Domain Policy for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy >> Maximum tolerance for computer clock synchronization to a maximum of "5" minutes or less.

c
Windows Server 2022 permissions on the Active Directory data files must only allow System and Administrators access.
RMF Control
SI-11
Severity
High
CCI
CCI-001314
Version
WN22-DC-000070
Vuln IDs
V-254391
Rule IDs
SV-254391r877392_rule
Improper access permissions for directory data-related files could allow unauthorized users to read, modify, or delete directory data or audit trails. Satisfies: SRG-OS-000324-GPOS-00125, SRG-OS-000206-GPOS-00084
Fix: F-57827r848988_fix

Maintain the permissions on NTDS database and log files as follows: NT AUTHORITY\SYSTEM:(I)(F) BUILTIN\Administrators:(I)(F) (I) - permission inherited from parent container (F) - full access

b
Windows Server 2022 must be configured to audit Account Management - Computer Account Management successes.
RMF Control
AC-2
Severity
Medium
CCI
CCI-000018
Version
WN22-DC-000230
Vuln IDs
V-254407
Rule IDs
SV-254407r849037_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Computer Account Management records events such as creating, changing, deleting, renaming, disabling, or enabling computer accounts. Satisfies: SRG-OS-000004-GPOS-00004, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000476-GPOS-00221
Fix: F-57843r849036_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> Audit Computer Account Management with Success selected.

b
Windows Server 2022 must be configured to audit DS Access - Directory Service Access successes.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-DC-000240
Vuln IDs
V-254408
Rule IDs
SV-254408r849040_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Directory Service Access records events related to users accessing an Active Directory object. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Fix: F-57844r849039_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> DS Access >> Directory Service Access with Success selected.

b
Windows Server 2022 must be configured to audit DS Access - Directory Service Access failures.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-DC-000250
Vuln IDs
V-254409
Rule IDs
SV-254409r849043_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Directory Service Access records events related to users accessing an Active Directory object. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Fix: F-57845r849042_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> DS Access >> Directory Service Access with "Failure" selected.

b
Windows Server 2022 must be configured to audit DS Access - Directory Service Changes successes.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000172
Version
WN22-DC-000260
Vuln IDs
V-254410
Rule IDs
SV-254410r849046_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Directory Service Changes records events related to changes made to objects in Active Directory Domain Services. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Fix: F-57846r849045_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> DS Access >> Directory Service Changes with "Success" selected.

b
Windows Server 2022 domain controllers must require LDAP access signing.
RMF Control
SC-8
Severity
Medium
CCI
CCI-002418
Version
WN22-DC-000320
Vuln IDs
V-254416
Rule IDs
SV-254416r916422_rule
Unsigned network traffic is susceptible to man-in-the-middle attacks, where an intruder captures packets between the server and the client and modifies them before forwarding them to the client. In the case of an LDAP server, this means that an attacker could cause a client to make decisions based on false records from the LDAP directory. The risk of an attacker pulling this off can be decreased by implementing strong physical security measures to protect the network infrastructure. Furthermore, implementing Internet Protocol security (IPsec) authentication header mode (AH), which performs mutual authentication and packet integrity for Internet Protocol (IP) traffic, can make all types of man-in-the-middle attacks extremely difficult. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188
Fix: F-57852r849063_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Domain controller: LDAP server signing requirements to "Require signing".

b
Windows Server 2022 domain controllers must be configured to allow reset of machine account passwords.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-DC-000330
Vuln IDs
V-254417
Rule IDs
SV-254417r849067_rule
Enabling this setting on all domain controllers in a domain prevents domain members from changing their computer account passwords. If these passwords are weak or compromised, the inability to change them may leave these computers vulnerable.
Fix: F-57853r849066_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Domain controller: Refuse machine account password changes to "Disabled".

b
Windows Server 2022 Access this computer from the network user right must only be assigned to the Administrators, Authenticated Users, and Enterprise Domain Controllers groups on domain controllers.
RMF Control
AC-3
Severity
Medium
CCI
CCI-000213
Version
WN22-DC-000340
Vuln IDs
V-254418
Rule IDs
SV-254418r849070_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Access this computer from the network" right may access resources on the system, and this right must be limited to those requiring it.
Fix: F-57854r849069_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Access this computer from the network to include only the following accounts or groups: - Administrators - Authenticated Users - Enterprise Domain Controllers

b
Windows Server 2022 Add workstations to domain user right must only be assigned to the Administrators group on domain controllers.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-DC-000350
Vuln IDs
V-254419
Rule IDs
SV-254419r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Add workstations to domain" right may add computers to a domain. This could result in unapproved or incorrectly configured systems being added to a domain.
Fix: F-57855r849072_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Add workstations to domain to include only the following accounts or groups: - Administrators

b
Windows Server 2022 Allow log on through Remote Desktop Services user right must only be assigned to the Administrators group on domain controllers.
RMF Control
AC-3
Severity
Medium
CCI
CCI-000213
Version
WN22-DC-000360
Vuln IDs
V-254420
Rule IDs
SV-254420r849076_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Allow log on through Remote Desktop Services" user right can access a system through Remote Desktop.
Fix: F-57856r849075_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Allow log on through Remote Desktop Services to include only the following accounts or groups: - Administrators

b
Windows Server 2022 Deny access to this computer from the network user right on domain controllers must be configured to prevent unauthenticated access.
RMF Control
AC-3
Severity
Medium
CCI
CCI-000213
Version
WN22-DC-000370
Vuln IDs
V-254421
Rule IDs
SV-254421r849079_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny access to this computer from the network" user right defines the accounts that are prevented from logging on from the network. The Guests group must be assigned this right to prevent unauthenticated access.
Fix: F-57857r849078_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny access to this computer from the network to include the following: - Guests Group

b
Windows Server 2022 Deny log on as a batch job user right on domain controllers must be configured to prevent unauthenticated access.
RMF Control
AC-3
Severity
Medium
CCI
CCI-000213
Version
WN22-DC-000380
Vuln IDs
V-254422
Rule IDs
SV-254422r849082_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on as a batch job" user right defines accounts that are prevented from logging on to the system as a batch job, such as Task Scheduler. The Guests group must be assigned to prevent unauthenticated access.
Fix: F-57858r849081_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny log on as a batch job to include the following: - Guests Group

b
Windows Server 2022 Deny log on as a service user right must be configured to include no accounts or groups (blank) on domain controllers.
RMF Control
AC-3
Severity
Medium
CCI
CCI-000213
Version
WN22-DC-000390
Vuln IDs
V-254423
Rule IDs
SV-254423r849085_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on as a service" user right defines accounts that are denied logon as a service. Incorrect configurations could prevent services from starting and result in a denial of service.
Fix: F-57859r849084_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny log on as a service to include no entries (blank).

b
Windows Server 2022 Deny log on locally user right on domain controllers must be configured to prevent unauthenticated access.
RMF Control
AC-3
Severity
Medium
CCI
CCI-000213
Version
WN22-DC-000400
Vuln IDs
V-254424
Rule IDs
SV-254424r849088_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on locally" user right defines accounts that are prevented from logging on interactively. The Guests group must be assigned this right to prevent unauthenticated access.
Fix: F-57860r849087_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny log on locally to include the following: - Guests Group

b
Windows Server 2022 Deny log on through Remote Desktop Services user right on domain controllers must be configured to prevent unauthenticated access.
RMF Control
AC-17
Severity
Medium
CCI
CCI-002314
Version
WN22-DC-000410
Vuln IDs
V-254425
Rule IDs
SV-254425r849091_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on through Remote Desktop Services" user right defines the accounts that are prevented from logging on using Remote Desktop Services. The Guests group must be assigned this right to prevent unauthenticated access.
Fix: F-57861r849090_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny log on through Remote Desktop Services to include the following: - Guests Group

b
Windows Server 2022 Enable computer and user accounts to be trusted for delegation user right must only be assigned to the Administrators group on domain controllers.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-DC-000420
Vuln IDs
V-254426
Rule IDs
SV-254426r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Enable computer and user accounts to be trusted for delegation" user right allows the "Trusted for Delegation" setting to be changed. This could allow unauthorized users to impersonate other users.
Fix: F-57862r849093_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Enable computer and user accounts to be trusted for delegation to include only the following accounts or groups: - Administrators

b
Windows Server 2022 local administrator accounts must have their privileged token filtered to prevent elevated privileges from being used over the network on domain-joined member servers.
RMF Control
SC-3
Severity
Medium
CCI
CCI-001084
Version
WN22-MS-000020
Vuln IDs
V-254429
Rule IDs
SV-254429r849103_rule
A compromised local administrator account can provide means for an attacker to move laterally between domain systems. With User Account Control enabled, filtering the privileged token for local administrator accounts will prevent the elevated privileges of these accounts from being used over the network.
Fix: F-57865r849102_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> MS Security Guide >> Apply UAC restrictions to local accounts on network logons to "Enabled". This policy setting requires the installation of the SecGuide custom templates included with the STIG package. "SecGuide.admx" and " SecGuide.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.

b
Windows Server 2022 local users on domain-joined member servers must not be enumerated.
RMF Control
CM-7
Severity
Medium
CCI
CCI-000381
Version
WN22-MS-000030
Vuln IDs
V-254430
Rule IDs
SV-254430r849106_rule
The username is one part of logon credentials that could be used to gain access to a system. Preventing the enumeration of users limits this information to authorized personnel.
Fix: F-57866r849105_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Logon >> Enumerate local users on domain-joined computers to "Disabled".

b
Windows Server 2022 must restrict unauthenticated Remote Procedure Call (RPC) clients from connecting to the RPC server on domain-joined member servers and standalone or nondomain-joined systems.
RMF Control
IA-3
Severity
Medium
CCI
CCI-001967
Version
WN22-MS-000040
Vuln IDs
V-254431
Rule IDs
SV-254431r877039_rule
Unauthenticated RPC clients may allow anonymous access to sensitive information. Configuring RPC to restrict unauthenticated RPC clients from connecting to the RPC server will prevent anonymous connections.
Fix: F-57867r849108_fix

Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Remote Procedure Call >> Restrict Unauthenticated RPC clients to "Enabled" with "Authenticated" selected.

b
Windows Server 2022 must limit the caching of logon credentials to four or less on domain-joined member servers.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-MS-000050
Vuln IDs
V-254432
Rule IDs
SV-254432r849112_rule
The default Windows configuration caches the last logon credentials for users who log on interactively to a system. This feature is provided for system availability reasons, such as the user's machine being disconnected from the network or domain controllers being unavailable. Even though the credential cache is well protected, if a system is attacked, an unauthorized individual may isolate the password to a domain user account using a password-cracking program and gain access to the domain.
Fix: F-57868r849111_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Interactive Logon: Number of previous logons to cache (in case Domain Controller is not available) to "4" logons or less.

b
Windows Server 2022 must restrict remote calls to the Security Account Manager (SAM) to Administrators on domain-joined member servers and standalone or nondomain-joined systems.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-MS-000060
Vuln IDs
V-254433
Rule IDs
SV-254433r877392_rule
The Windows SAM stores users' passwords. Restricting Remote Procedure Call (RPC) connections to the SAM to Administrators helps protect those credentials.
Fix: F-57869r849114_fix

Navigate to the policy Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network access: Restrict clients allowed to make remote calls to SAM. Select "Edit Security" to configure the "Security descriptor:". Add "Administrators" in "Group or user names:" if it is not already listed (this is the default). Select "Administrators" in "Group or user names:". Select "Allow" for "Remote Access" in "Permissions for "Administrators". Click "OK". The "Security descriptor:" must be populated with "O:BAG:BAD:(A;;RC;;;BA) for the policy to be enforced.

b
Windows Server 2022 Access this computer from the network user right must only be assigned to the Administrators and Authenticated Users groups on domain-joined member servers and standalone or nondomain-joined systems.
RMF Control
AC-3
Severity
Medium
CCI
CCI-000213
Version
WN22-MS-000070
Vuln IDs
V-254434
Rule IDs
SV-254434r849118_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Access this computer from the network" user right may access resources on the system, and this right must be limited to those requiring it.
Fix: F-57870r849117_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Access this computer from the network to include only the following accounts or groups: - Administrators - Authenticated Users

b
Windows Server 2022 Deny access to this computer from the network user right on domain-joined member servers must be configured to prevent access from highly privileged domain accounts and local accounts and from unauthenticated access on all systems.
RMF Control
AC-3
Severity
Medium
CCI
CCI-000213
Version
WN22-MS-000080
Vuln IDs
V-254435
Rule IDs
SV-254435r849121_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny access to this computer from the network" user right defines the accounts that are prevented from logging on from the network. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks, which could lead to the compromise of an entire domain. Local accounts on domain-joined systems must also be assigned this right to decrease the risk of lateral movement resulting from credential theft attacks. The Guests group must be assigned this right to prevent unauthenticated access.
Fix: F-57871r849120_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny access to this computer from the network to include the following: Domain Systems Only: - Enterprise Admins group - Domain Admins group - "Local account and member of Administrators group" or "Local account" (see Note below) All Systems: - Guests group Note: These are built-in security groups. "Local account" is more restrictive but may cause issues on servers such as systems that provide failover clustering.

b
Windows Server 2022 Deny log on as a batch job user right on domain-joined member servers must be configured to prevent access from highly privileged domain accounts and from unauthenticated access on all systems.
RMF Control
AC-3
Severity
Medium
CCI
CCI-000213
Version
WN22-MS-000090
Vuln IDs
V-254436
Rule IDs
SV-254436r849124_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on as a batch job" user right defines accounts that are prevented from logging on to the system as a batch job, such as Task Scheduler. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks, which could lead to the compromise of an entire domain. The Guests group must be assigned to prevent unauthenticated access.
Fix: F-57872r849123_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny log on as a batch job to include the following: Domain Systems Only: - Enterprise Admins Group - Domain Admins Group All Systems: - Guests Group

b
Windows Server 2022 Deny log on as a service user right on domain-joined member servers must be configured to prevent access from highly privileged domain accounts. No other groups or accounts must be assigned this right.
RMF Control
AC-3
Severity
Medium
CCI
CCI-000213
Version
WN22-MS-000100
Vuln IDs
V-254437
Rule IDs
SV-254437r890547_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on as a service" user right defines accounts that are denied logon as a service. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks, which could lead to the compromise of an entire domain. Incorrect configurations could prevent services from starting and result in a denial of service.
Fix: F-57873r849126_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny log on as a service to include the following: Domain systems: - Enterprise Admins Group - Domain Admins Group

b
Windows Server 2022 Deny log on locally user right on domain-joined member servers must be configured to prevent access from highly privileged domain accounts and from unauthenticated access on all systems.
RMF Control
AC-3
Severity
Medium
CCI
CCI-000213
Version
WN22-MS-000110
Vuln IDs
V-254438
Rule IDs
SV-254438r849130_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on locally" user right defines accounts that are prevented from logging on interactively. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks, which could lead to the compromise of an entire domain. The Guests group must be assigned this right to prevent unauthenticated access.
Fix: F-57874r849129_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny log on locally to include the following: Domain Systems Only: - Enterprise Admins Group - Domain Admins Group All Systems: - Guests Group

b
Windows Server 2022 Deny log on through Remote Desktop Services user right on domain-joined member servers must be configured to prevent access from highly privileged domain accounts and all local accounts and from unauthenticated access on all systems.
RMF Control
AC-17
Severity
Medium
CCI
CCI-002314
Version
WN22-MS-000120
Vuln IDs
V-254439
Rule IDs
SV-254439r849133_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on through Remote Desktop Services" user right defines the accounts that are prevented from logging on using Remote Desktop Services. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks, which could lead to the compromise of an entire domain. Local accounts on domain-joined systems must also be assigned this right to decrease the risk of lateral movement resulting from credential theft attacks. The Guests group must be assigned this right to prevent unauthenticated access.
Fix: F-57875r849132_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny log on through Remote Desktop Services to include the following: Domain Systems Only: - Enterprise Admins group - Domain Admins group - Local account (see Note below) All Systems: - Guests group Note: "Local account" is referring to the Windows built-in security group.

b
Windows Server 2022 Enable computer and user accounts to be trusted for delegation user right must not be assigned to any groups or accounts on domain-joined member servers and standalone or nondomain-joined systems.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-MS-000130
Vuln IDs
V-254440
Rule IDs
SV-254440r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Enable computer and user accounts to be trusted for delegation" user right allows the "Trusted for Delegation" setting to be changed. This could allow unauthorized users to impersonate other users.
Fix: F-57876r849135_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Enable computer and user accounts to be trusted for delegation to be defined but containing no entries (blank).

b
Windows Server 2022 must have the DoD Root Certificate Authority (CA) certificates installed in the Trusted Root Store.
RMF Control
IA-5
Severity
Medium
CCI
CCI-000185
Version
WN22-PK-000010
Vuln IDs
V-254442
Rule IDs
SV-254442r921943_rule
To ensure secure DoD websites and DoD-signed code are properly validated, the system must trust the DoD Root CAs. The DoD root certificates will ensure that the trust chain is established for server certificates issued from the DoD CAs. Satisfies: SRG-OS-000066-GPOS-00034, SRG-OS-000403-GPOS-00182
Fix: F-57878r921942_fix

Install the DoD Root CA certificates: DoD Root CA 3 DoD Root CA 4 DoD Root CA 5 DoD Root CA 6 The InstallRoot tool is available on Cyber Exchange at https://cyber.mil/pki-pke/tools-configuration-files. Certificate bundles published by the PKI can be found at https://crl.gds.disa.mil/.

b
Windows Server 2022 must have the DoD Interoperability Root Certificate Authority (CA) cross-certificates installed in the Untrusted Certificates Store on unclassified systems.
RMF Control
IA-5
Severity
Medium
CCI
CCI-000185
Version
WN22-PK-000020
Vuln IDs
V-254443
Rule IDs
SV-254443r890553_rule
To ensure users do not experience denial of service when performing certificate-based authentication to DoD websites due to the system chaining to a root other than DoD Root CAs, the DoD Interoperability Root CA cross-certificates must be installed in the Untrusted Certificate Store. This requirement only applies to unclassified systems. Satisfies: SRG-OS-000066-GPOS-00034, SRG-OS-000403-GPOS-00182
Fix: F-57879r890552_fix

Install the DoD Interoperability Root CA cross-certificates on unclassified systems. Issued To - Issued By - Thumbprint DoD Root CA 3- DoD Interoperability Root CA 2 - 49CBE933151872E17C8EAE7F0ABA97FB610F6477 Administrators must run the Federal Bridge Certification Authority (FBCA) Cross-Certificate Removal Tool once as an administrator and once as the current user. The FBCA Cross-Certificate Remover Tool and User Guide are available on Cyber Exchange at https://cyber.mil/pki-pke/tools-configuration-files. Certificate bundles published by the PKI can be found at https://crl.gds.disa.mil/.

b
Windows Server 2022 must have the US DoD CCEB Interoperability Root CA cross-certificates in the Untrusted Certificates Store on unclassified systems.
RMF Control
IA-5
Severity
Medium
CCI
CCI-000185
Version
WN22-PK-000030
Vuln IDs
V-254444
Rule IDs
SV-254444r894343_rule
To ensure users do not experience denial of service when performing certificate-based authentication to DoD websites due to the system chaining to a root other than DoD Root CAs, the US DoD CCEB Interoperability Root CA cross-certificates must be installed in the Untrusted Certificate Store. This requirement only applies to unclassified systems. Satisfies: SRG-OS-000066-GPOS-00034, SRG-OS-000403-GPOS-00182
Fix: F-57880r894342_fix

Install the US DoD CCEB Interoperability Root CA cross-certificate on unclassified systems. Issued To - Issued By - Thumbprint DoD Root CA 3 - US DoD CCEB Interoperability Root CA 2 - 9B74964506C7ED9138070D08D5F8B969866560C8 Administrators must run the Federal Bridge Certification Authority (FBCA) Cross-Certificate Removal Tool once as an administrator and once as the current user. The FBCA Cross-Certificate Remover Tool and User Guide are available on Cyber Exchange at https://cyber.mil/pki-pke/tools-configuration-files. PKI can be found at https://crl.gds.disa.mil/.

b
Windows Server 2022 must have the built-in guest account disabled.
RMF Control
IA-8
Severity
Medium
CCI
CCI-000804
Version
WN22-SO-000010
Vuln IDs
V-254445
Rule IDs
SV-254445r849151_rule
A system faces an increased vulnerability threat if the built-in guest account is not disabled. This is a known account that exists on all Windows systems and cannot be deleted. This account is initialized during the installation of the operating system with no password assigned.
Fix: F-57881r849150_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Accounts: Guest account status to "Disabled".

c
Windows Server 2022 must prevent local accounts with blank passwords from being used from the network.
RMF Control
CM-6
Severity
High
CCI
CCI-000366
Version
WN22-SO-000020
Vuln IDs
V-254446
Rule IDs
SV-254446r849154_rule
An account without a password can allow unauthorized access to a system as only the username would be required. Password policies must prevent accounts with blank passwords from existing on a system. However, if a local account with a blank password does exist, enabling this setting will prevent network access, limiting the account to local console logon only.
Fix: F-57882r849153_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Accounts: Limit local account use of blank passwords to console logon only to "Enabled".

b
Windows Server 2022 built-in administrator account must be renamed.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-SO-000030
Vuln IDs
V-254447
Rule IDs
SV-254447r849157_rule
The built-in administrator account is a well-known account subject to attack. Renaming this account to an unidentified name improves the protection of this account and the system.
Fix: F-57883r849156_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Accounts: Rename administrator account to a name other than "Administrator".

b
Windows Server 2022 built-in guest account must be renamed.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-SO-000040
Vuln IDs
V-254448
Rule IDs
SV-254448r849160_rule
The built-in guest account is a well-known user account on all Windows systems and, as initially installed, does not require a password. This can allow access to system resources by unauthorized users. Renaming this account to an unidentified name improves the protection of this account and the system.
Fix: F-57884r849159_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Accounts: Rename guest account to a name other than "Guest".

b
Windows Server 2022 must force audit policy subcategory settings to override audit policy category settings.
RMF Control
AU-12
Severity
Medium
CCI
CCI-000169
Version
WN22-SO-000050
Vuln IDs
V-254449
Rule IDs
SV-254449r849163_rule
Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. This setting allows administrators to enable more precise auditing capabilities.
Fix: F-57885r849162_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings to "Enabled".

b
Windows Server 2022 setting Domain member: Digitally encrypt or sign secure channel data (always) must be configured to Enabled.
RMF Control
SC-8
Severity
Medium
CCI
CCI-002418
Version
WN22-SO-000060
Vuln IDs
V-254450
Rule IDs
SV-254450r916422_rule
Requests sent on the secure channel are authenticated, and sensitive information (such as passwords) is encrypted, but not all information is encrypted. If this policy is enabled, outgoing secure channel traffic will be encrypted and signed. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188
Fix: F-57886r849165_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Domain member: Digitally encrypt or sign secure channel data (always) to "Enabled".

b
Windows Server 2022 setting Domain member: Digitally encrypt secure channel data (when possible) must be configured to Enabled.
RMF Control
SC-8
Severity
Medium
CCI
CCI-002418
Version
WN22-SO-000070
Vuln IDs
V-254451
Rule IDs
SV-254451r916422_rule
Requests sent on the secure channel are authenticated, and sensitive information (such as passwords) is encrypted, but not all information is encrypted. If this policy is enabled, outgoing secure channel traffic will be encrypted. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188
Fix: F-57887r849168_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Domain member: Digitally encrypt secure channel data (when possible) to "Enabled".

b
Windows Server 2022 setting Domain member: Digitally sign secure channel data (when possible) must be configured to Enabled.
RMF Control
SC-8
Severity
Medium
CCI
CCI-002418
Version
WN22-SO-000080
Vuln IDs
V-254452
Rule IDs
SV-254452r916422_rule
Requests sent on the secure channel are authenticated, and sensitive information (such as passwords) is encrypted, but the channel is not integrity checked. If this policy is enabled, outgoing secure channel traffic will be signed. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188
Fix: F-57888r849171_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Domain member: Digitally sign secure channel data (when possible) to "Enabled".

b
Windows Server 2022 computer account password must not be prevented from being reset.
RMF Control
IA-3
Severity
Medium
CCI
CCI-001967
Version
WN22-SO-000090
Vuln IDs
V-254453
Rule IDs
SV-254453r877039_rule
Computer account passwords are changed automatically on a regular basis. Disabling automatic password changes can make the system more vulnerable to malicious access. Frequent password changes can be a significant safeguard for the system. A new password for the computer account will be generated every 30 days.
Fix: F-57889r849174_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Domain member: Disable machine account password changes to "Disabled".

b
Windows Server 2022 maximum age for machine account passwords must be configured to 30 days or less.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-SO-000100
Vuln IDs
V-254454
Rule IDs
SV-254454r849178_rule
Computer account passwords are changed automatically on a regular basis. This setting controls the maximum password age that a machine account may have. This must be set to no more than 30 days, ensuring the machine changes its password monthly.
Fix: F-57890r849177_fix

This is the default configuration for this setting (30 days). Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Domain member: Maximum machine account password age to "30" or less (excluding "0", which is unacceptable).

b
Windows Server 2022 must be configured to require a strong session key.
RMF Control
SC-8
Severity
Medium
CCI
CCI-002418
Version
WN22-SO-000110
Vuln IDs
V-254455
Rule IDs
SV-254455r916422_rule
A computer connecting to a domain controller will establish a secure channel. The secure channel connection may be subject to compromise, such as hijacking or eavesdropping, if strong session keys are not used to establish the connection. Requiring strong session keys enforces 128-bit encryption between systems. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188
Fix: F-57891r849180_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Domain member: Require strong (Windows 2000 or Later) session key to "Enabled".

b
Windows Server 2022 machine inactivity limit must be set to 15 minutes or less, locking the system with the screen saver.
RMF Control
AC-11
Severity
Medium
CCI
CCI-000056
Version
WN22-SO-000120
Vuln IDs
V-254456
Rule IDs
SV-254456r849184_rule
Unattended systems are susceptible to unauthorized use and must be locked when unattended. The screen saver must be set at a maximum of 15 minutes and be password protected. This protects critical and sensitive data from exposure to unauthorized personnel with physical access to the computer. Satisfies: SRG-OS-000028-GPOS-00009, SRG-OS-000029-GPOS-00010, SRG-OS-000031-GPOS-00012
Fix: F-57892r849183_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Interactive logon: Machine inactivity limit to "900" seconds or less, excluding "0" which is effectively disabled.

b
Windows Server 2022 Smart Card removal option must be configured to Force Logoff or Lock Workstation.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-SO-000150
Vuln IDs
V-254459
Rule IDs
SV-254459r849193_rule
Unattended systems are susceptible to unauthorized use and must be locked. Configuring a system to lock when a smart card is removed will ensure the system is inaccessible when unattended.
Fix: F-57895r849192_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Interactive logon: Smart card removal behavior to "Lock Workstation" or "Force Logoff".

b
Windows Server 2022 setting Microsoft network client: Digitally sign communications (always) must be configured to Enabled.
RMF Control
SC-8
Severity
Medium
CCI
CCI-002418
Version
WN22-SO-000160
Vuln IDs
V-254460
Rule IDs
SV-254460r916422_rule
The server message block (SMB) protocol provides the basis for many network operations. Digitally signed SMB packets aid in preventing man-in-the-middle attacks. If this policy is enabled, the SMB client will only communicate with an SMB server that performs SMB packet signing. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188
Fix: F-57896r849195_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Microsoft network client: Digitally sign communications (always) to "Enabled".

b
Windows Server 2022 setting Microsoft network client: Digitally sign communications (if server agrees) must be configured to Enabled.
RMF Control
SC-8
Severity
Medium
CCI
CCI-002418
Version
WN22-SO-000170
Vuln IDs
V-254461
Rule IDs
SV-254461r916422_rule
The server message block (SMB) protocol provides the basis for many network operations. If this policy is enabled, the SMB client will request packet signing when communicating with an SMB server that is enabled or required to perform SMB packet signing. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188
Fix: F-57897r849198_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Microsoft network client: Digitally sign communications (if server agrees) to "Enabled".

b
Windows Server 2022 unencrypted passwords must not be sent to third-party Server Message Block (SMB) servers.
RMF Control
IA-5
Severity
Medium
CCI
CCI-000197
Version
WN22-SO-000180
Vuln IDs
V-254462
Rule IDs
SV-254462r877396_rule
Some non-Microsoft SMB servers only support unencrypted (plain-text) password authentication. Sending plain-text passwords across the network when authenticating to an SMB server reduces the overall security of the environment. Check with the vendor of the SMB server to determine if there is a way to support encrypted password authentication.
Fix: F-57898r849201_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Microsoft Network Client: Send unencrypted password to third-party SMB servers to "Disabled".

b
Windows Server 2022 setting Microsoft network server: Digitally sign communications (always) must be configured to Enabled.
RMF Control
SC-8
Severity
Medium
CCI
CCI-002418
Version
WN22-SO-000190
Vuln IDs
V-254463
Rule IDs
SV-254463r916422_rule
The server message block (SMB) protocol provides the basis for many network operations. Digitally signed SMB packets aid in preventing man-in-the-middle attacks. If this policy is enabled, the SMB server will only communicate with an SMB client that performs SMB packet signing. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188
Fix: F-57899r849204_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Microsoft network server: Digitally sign communications (always) to "Enabled".

b
Windows Server 2022 setting Microsoft network server: Digitally sign communications (if client agrees) must be configured to Enabled.
RMF Control
SC-8
Severity
Medium
CCI
CCI-002418
Version
WN22-SO-000200
Vuln IDs
V-254464
Rule IDs
SV-254464r916422_rule
The server message block (SMB) protocol provides the basis for many network operations. Digitally signed SMB packets aid in preventing man-in-the-middle attacks. If this policy is enabled, the SMB server will negotiate SMB packet signing as requested by the client. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188
Fix: F-57900r849207_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Microsoft network server: Digitally sign communications (if client agrees) to "Enabled".

c
Windows Server 2022 must not allow anonymous enumeration of Security Account Manager (SAM) accounts.
RMF Control
CM-6
Severity
High
CCI
CCI-000366
Version
WN22-SO-000220
Vuln IDs
V-254466
Rule IDs
SV-254466r849214_rule
Anonymous enumeration of SAM accounts allows anonymous logon users (null session connections) to list all accounts names, thus providing a list of potential points to attack the system.
Fix: F-57902r849213_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network access: Do not allow anonymous enumeration of SAM accounts to "Enabled".

c
Windows Server 2022 must not allow anonymous enumeration of shares.
RMF Control
SC-4
Severity
High
CCI
CCI-001090
Version
WN22-SO-000230
Vuln IDs
V-254467
Rule IDs
SV-254467r849217_rule
Allowing anonymous logon users (null session connections) to list all account names and enumerate all shared resources can provide a map of potential points to attack the system.
Fix: F-57903r849216_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network access: Do not allow anonymous enumeration of SAM accounts and shares to "Enabled".

b
Windows Server 2022 must be configured to prevent anonymous users from having the same permissions as the Everyone group.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-SO-000240
Vuln IDs
V-254468
Rule IDs
SV-254468r849220_rule
Access by anonymous users must be restricted. If this setting is enabled, anonymous users have the same rights and permissions as the built-in Everyone group. Anonymous users must not have these permissions or rights.
Fix: F-57904r849219_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network access: Let Everyone permissions apply to anonymous users to "Disabled".

c
Windows Server 2022 must restrict anonymous access to Named Pipes and Shares.
RMF Control
SC-4
Severity
High
CCI
CCI-001090
Version
WN22-SO-000250
Vuln IDs
V-254469
Rule IDs
SV-254469r849223_rule
Allowing anonymous access to named pipes or shares provides the potential for unauthorized system access. This setting restricts access to those defined in "Network access: Named Pipes that can be accessed anonymously" and "Network access: Shares that can be accessed anonymously", both of which must be blank under other requirements.
Fix: F-57905r849222_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network access: Restrict anonymous access to Named Pipes and Shares to "Enabled".

b
Windows Server 2022 services using Local System that use Negotiate when reverting to NTLM authentication must use the computer identity instead of authenticating anonymously.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-SO-000260
Vuln IDs
V-254470
Rule IDs
SV-254470r849226_rule
Services using Local System that use Negotiate when reverting to NTLM authentication may gain unauthorized access if allowed to authenticate anonymously versus using the computer identity.
Fix: F-57906r849225_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network security: Allow Local System to use computer identity for NTLM to "Enabled".

b
Windows Server 2022 must prevent NTLM from falling back to a Null session.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-SO-000270
Vuln IDs
V-254471
Rule IDs
SV-254471r849229_rule
NTLM sessions that are allowed to fall back to Null (unauthenticated) sessions may gain unauthorized access.
Fix: F-57907r849228_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network security: Allow LocalSystem NULL session fallback to "Disabled".

b
Windows Server 2022 must prevent PKU2U authentication using online identities.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-SO-000280
Vuln IDs
V-254472
Rule IDs
SV-254472r849232_rule
PKU2U is a peer-to-peer authentication protocol. This setting prevents online identities from authenticating to domain-joined systems. Authentication will be centrally managed with Windows user accounts.
Fix: F-57908r849231_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network security: Allow PKU2U authentication requests to this computer to use online identities to "Disabled".

b
Windows Server 2022 Kerberos encryption types must be configured to prevent the use of DES and RC4 encryption suites.
RMF Control
IA-7
Severity
Medium
CCI
CCI-000803
Version
WN22-SO-000290
Vuln IDs
V-254473
Rule IDs
SV-254473r849235_rule
Certain encryption types are no longer considered secure. The DES and RC4 encryption suites must not be used for Kerberos encryption. Note: Organizations with domain controllers running earlier versions of Windows where RC4 encryption is enabled, selecting "The other domain supports Kerberos AES Encryption" on domain trusts, may be required to allow client communication across the trust relationship.
Fix: F-57909r849234_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network security: Configure encryption types allowed for Kerberos to "Enabled" with only the following selected: AES128_HMAC_SHA1 AES256_HMAC_SHA1 Future encryption types Note: Organizations with domain controllers running earlier versions of Windows where RC4 encryption is enabled, selecting "The other domain supports Kerberos AES Encryption" on domain trusts, may be required to allow client communication across the trust relationship.

c
Windows Server 2022 must be configured to prevent the storage of the LAN Manager hash of passwords.
RMF Control
IA-5
Severity
High
CCI
CCI-000196
Version
WN22-SO-000300
Vuln IDs
V-254474
Rule IDs
SV-254474r877397_rule
The LAN Manager hash uses a weak encryption algorithm and there are several tools available that use this hash to retrieve account passwords. This setting controls whether a LAN Manager hash of the password is stored in the SAM the next time the password is changed.
Fix: F-57910r849237_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network security: Do not store LAN Manager hash value on next password change to "Enabled".

c
Windows Server 2022 LAN Manager authentication level must be configured to send NTLMv2 response only and to refuse LM and NTLM.
RMF Control
CM-6
Severity
High
CCI
CCI-000366
Version
WN22-SO-000310
Vuln IDs
V-254475
Rule IDs
SV-254475r849241_rule
The Kerberos v5 authentication protocol is the default for authentication of users who are logging on to domain accounts. NTLM, which is less secure, is retained in later Windows versions for compatibility with clients and servers that are running earlier versions of Windows or applications that still use it. It is also used to authenticate logons to standalone or nondomain-joined computers that are running later versions.
Fix: F-57911r849240_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network security: LAN Manager authentication level to "Send NTLMv2 response only. Refuse LM & NTLM".

b
Windows Server 2022 must be configured to at least negotiate signing for LDAP client signing.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-SO-000320
Vuln IDs
V-254476
Rule IDs
SV-254476r849244_rule
This setting controls the signing requirements for LDAP clients. This must be set to "Negotiate signing" or "Require signing", depending on the environment and type of LDAP server in use.
Fix: F-57912r849243_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network security: LDAP client signing requirements to "Negotiate signing" at a minimum.

b
Windows Server 2022 session security for NTLM SSP-based clients must be configured to require NTLMv2 session security and 128-bit encryption.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-SO-000330
Vuln IDs
V-254477
Rule IDs
SV-254477r849247_rule
Microsoft has implemented a variety of security support providers for use with Remote Procedure Call (RPC) sessions. All of the options must be enabled to ensure the maximum security level.
Fix: F-57913r849246_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network security: Minimum session security for NTLM SSP based (including secure RPC) clients to "Require NTLMv2 session security" and "Require 128-bit encryption" (all options selected).

b
Windows Server 2022 session security for NTLM SSP-based servers must be configured to require NTLMv2 session security and 128-bit encryption.
RMF Control
CM-6
Severity
Medium
CCI
CCI-000366
Version
WN22-SO-000340
Vuln IDs
V-254478
Rule IDs
SV-254478r849250_rule
Microsoft has implemented a variety of security support providers for use with Remote Procedure Call (RPC) sessions. All of the options must be enabled to ensure the maximum security level.
Fix: F-57914r849249_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network security: Minimum session security for NTLM SSP based (including secure RPC) servers to "Require NTLMv2 session security" and "Require 128-bit encryption" (all options selected).

b
Windows Server 2022 users must be required to enter a password to access private keys stored on the computer.
RMF Control
IA-5
Severity
Medium
CCI
CCI-000186
Version
WN22-SO-000350
Vuln IDs
V-254479
Rule IDs
SV-254479r849253_rule
If the private key is discovered, an attacker can use the key to authenticate as an authorized user and gain access to the network infrastructure. The cornerstone of the PKI is the private key used to encrypt or digitally sign information. If the private key is stolen, this will lead to the compromise of the authentication and nonrepudiation gained through PKI because the attacker can use the private key to digitally sign documents and pretend to be the authorized user. Both the holders of a digital certificate and the issuing authority must protect the computers, storage devices, or whatever they use to keep the private keys.
Fix: F-57915r849252_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> System cryptography: Force strong key protection for user keys stored on the computer to "User must enter a password each time they use a key".

b
Windows Server 2022 must be configured to use FIPS-compliant algorithms for encryption, hashing, and signing.
RMF Control
SC-13
Severity
Medium
CCI
CCI-002450
Version
WN22-SO-000360
Vuln IDs
V-254480
Rule IDs
SV-254480r877466_rule
This setting ensures the system uses algorithms that are FIPS-compliant for encryption, hashing, and signing. FIPS-compliant algorithms meet specific standards established by the U.S. Government and must be the algorithms used for all OS encryption functions.
Fix: F-57916r849255_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing to "Enabled".

a
Windows Server 2022 default permissions of global system objects must be strengthened.
RMF Control
CM-6
Severity
Low
CCI
CCI-000366
Version
WN22-SO-000370
Vuln IDs
V-254481
Rule IDs
SV-254481r849259_rule
Windows systems maintain a global list of shared system resources such as DOS device names, mutexes, and semaphores. Each type of object is created with a default Discretionary Access Control List (DACL) that specifies who can access the objects with what permissions. When this policy is enabled, the default DACL is stronger, allowing nonadministrative users to read shared objects but not to modify shared objects they did not create.
Fix: F-57917r849258_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> System objects: Strengthen default permissions of internal system objects (e.g., Symbolic Links) to "Enabled".

b
Windows Server 2022 User Account Control (UAC) approval mode for the built-in Administrator must be enabled.
RMF Control
IA-11
Severity
Medium
CCI
CCI-002038
Version
WN22-SO-000380
Vuln IDs
V-254482
Rule IDs
SV-254482r849262_rule
UAC is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting configures the built-in Administrator account so that it runs in Admin Approval Mode. Satisfies: SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157
Fix: F-57918r849261_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> User Account Control: Admin Approval Mode for the Built-in Administrator account to "Enabled".

b
Windows Server 2022 UIAccess applications must not be allowed to prompt for elevation without using the secure desktop.
RMF Control
SC-3
Severity
Medium
CCI
CCI-001084
Version
WN22-SO-000390
Vuln IDs
V-254483
Rule IDs
SV-254483r849265_rule
User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting prevents User Interface Accessibility programs from disabling the secure desktop for elevation prompts.
Fix: F-57919r849264_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> User Account Control: Allow UIAccess applications to prompt for elevation without using the secure desktop to "Disabled".

b
Windows Server 2022 User Account Control (UAC) must, at a minimum, prompt administrators for consent on the secure desktop.
RMF Control
SC-3
Severity
Medium
CCI
CCI-001084
Version
WN22-SO-000400
Vuln IDs
V-254484
Rule IDs
SV-254484r849268_rule
UAC is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting configures the elevation requirements for logged-on administrators to complete a task that requires raised privileges.
Fix: F-57920r849267_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode to "Prompt for consent on the secure desktop". The more secure option for this setting, "Prompt for credentials on the secure desktop", would also be acceptable.

b
Windows Server 2022 User Account Control (UAC) must automatically deny standard user requests for elevation.
RMF Control
IA-11
Severity
Medium
CCI
CCI-002038
Version
WN22-SO-000410
Vuln IDs
V-254485
Rule IDs
SV-254485r849271_rule
UAC is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting controls the behavior of elevation when requested by a standard user account. Satisfies: SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157
Fix: F-57921r849270_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> User Account Control: Behavior of the elevation prompt for standard users to "Automatically deny elevation requests".

b
Windows Server 2022 User Account Control (UAC) must be configured to detect application installations and prompt for elevation.
RMF Control
SC-3
Severity
Medium
CCI
CCI-001084
Version
WN22-SO-000420
Vuln IDs
V-254486
Rule IDs
SV-254486r849274_rule
UAC is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting requires Windows to respond to application installation requests by prompting for credentials.
Fix: F-57922r849273_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> User Account Control: Detect application installations and prompt for elevation to "Enabled".

b
Windows Server 2022 User Account Control (UAC) must only elevate UIAccess applications that are installed in secure locations.
RMF Control
SC-3
Severity
Medium
CCI
CCI-001084
Version
WN22-SO-000430
Vuln IDs
V-254487
Rule IDs
SV-254487r849277_rule
UAC is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting configures Windows to only allow applications installed in a secure location on the file system, such as the Program Files or the Windows\System32 folders, to run with elevated privileges.
Fix: F-57923r849276_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> User Account Control: Only elevate UIAccess applications that are installed in secure locations to "Enabled".

b
Windows Server 2022 User Account Control (UAC) must run all administrators in Admin Approval Mode, enabling UAC.
RMF Control
IA-11
Severity
Medium
CCI
CCI-002038
Version
WN22-SO-000440
Vuln IDs
V-254488
Rule IDs
SV-254488r849280_rule
UAC is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting enables UAC. Satisfies: SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157
Fix: F-57924r849279_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> User Account Control: Run all administrators in Admin Approval Mode to "Enabled".

b
Windows Server 2022 User Account Control (UAC) must virtualize file and registry write failures to per-user locations.
RMF Control
SC-3
Severity
Medium
CCI
CCI-001084
Version
WN22-SO-000450
Vuln IDs
V-254489
Rule IDs
SV-254489r849283_rule
UAC is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting configures non-UAC-compliant applications to run in virtualized file and registry entries in per-user locations, allowing them to run.
Fix: F-57925r849282_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> User Account Control: Virtualize file and registry write failures to per-user locations to "Enabled".

b
Windows Server 2022 Access Credential Manager as a trusted caller user right must not be assigned to any groups or accounts.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-UR-000010
Vuln IDs
V-254491
Rule IDs
SV-254491r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Access Credential Manager as a trusted caller" user right may be able to retrieve the credentials of other accounts from Credential Manager.
Fix: F-57927r849288_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Access Credential Manager as a trusted caller to be defined but containing no entries (blank).

c
Windows Server 2022 Act as part of the operating system user right must not be assigned to any groups or accounts.
RMF Control
AC-6
Severity
High
CCI
CCI-002235
Version
WN22-UR-000020
Vuln IDs
V-254492
Rule IDs
SV-254492r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Act as part of the operating system" user right can assume the identity of any user and gain access to resources that the user is authorized to access. Any accounts with this right can take complete control of a system.
Fix: F-57928r849291_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Act as part of the operating system to be defined but containing no entries (blank).

b
Windows Server 2022 Allow log on locally user right must only be assigned to the Administrators group.
RMF Control
AC-3
Severity
Medium
CCI
CCI-000213
Version
WN22-UR-000030
Vuln IDs
V-254493
Rule IDs
SV-254493r849295_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Allow log on locally" user right can log on interactively to a system.
Fix: F-57929r849294_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Allow log on locally to include only the following accounts or groups: - Administrators

b
Windows Server 2022 back up files and directories user right must only be assigned to the Administrators group.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-UR-000040
Vuln IDs
V-254494
Rule IDs
SV-254494r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Back up files and directories" user right can circumvent file and directory permissions and could allow access to sensitive data.
Fix: F-57930r849297_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Back up files and directories to include only the following accounts or groups: - Administrators

b
Windows Server 2022 create a pagefile user right must only be assigned to the Administrators group.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-UR-000050
Vuln IDs
V-254495
Rule IDs
SV-254495r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Create a pagefile" user right can change the size of a pagefile, which could affect system performance.
Fix: F-57931r849300_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Create a pagefile to include only the following accounts or groups: - Administrators

c
Windows Server 2022 create a token object user right must not be assigned to any groups or accounts.
RMF Control
AC-6
Severity
High
CCI
CCI-002235
Version
WN22-UR-000060
Vuln IDs
V-254496
Rule IDs
SV-254496r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Create a token object" user right allows a process to create an access token. This could be used to provide elevated rights and compromise a system.
Fix: F-57932r849303_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Create a token object to be defined but containing no entries (blank).

b
Windows Server 2022 create global objects user right must only be assigned to Administrators, Service, Local Service, and Network Service.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-UR-000070
Vuln IDs
V-254497
Rule IDs
SV-254497r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Create global objects" user right can create objects that are available to all sessions, which could affect processes in other users' sessions.
Fix: F-57933r849306_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Create global objects to include only the following accounts or groups: - Administrators - Service - Local Service - Network Service

b
Windows Server 2022 create permanent shared objects user right must not be assigned to any groups or accounts.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-UR-000080
Vuln IDs
V-254498
Rule IDs
SV-254498r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Create permanent shared objects" user right could expose sensitive data by creating shared objects.
Fix: F-57934r849309_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Create permanent shared objects to be defined but containing no entries (blank).

b
Windows Server 2022 create symbolic links user right must only be assigned to the Administrators group.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-UR-000090
Vuln IDs
V-254499
Rule IDs
SV-254499r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Create symbolic links" user right can create pointers to other objects, which could expose the system to attack.
Fix: F-57935r849312_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Create symbolic links to include only the following accounts or groups: - Administrators Systems that have the Hyper-V role will also have "Virtual Machines" given this user right. If this needs to be added manually, enter it as "NT Virtual Machine\Virtual Machines".

c
Windows Server 2022 debug programs user right must only be assigned to the Administrators group.
RMF Control
AC-6
Severity
High
CCI
CCI-002235
Version
WN22-UR-000100
Vuln IDs
V-254500
Rule IDs
SV-254500r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Debug programs" user right can attach a debugger to any process or to the kernel, providing complete access to sensitive and critical operating system components. This right is given to Administrators in the default configuration.
Fix: F-57936r849315_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Debug programs to include only the following accounts or groups: - Administrators

b
Windows Server 2022 force shutdown from a remote system user right must only be assigned to the Administrators group.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-UR-000110
Vuln IDs
V-254501
Rule IDs
SV-254501r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Force shutdown from a remote system" user right can remotely shut down a system, which could result in a denial of service.
Fix: F-57937r849318_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Force shutdown from a remote system to include only the following accounts or groups: - Administrators

b
Windows Server 2022 generate security audits user right must only be assigned to Local Service and Network Service.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-UR-000120
Vuln IDs
V-254502
Rule IDs
SV-254502r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Generate security audits" user right specifies users and processes that can generate Security Log audit records, which must only be the system service accounts defined.
Fix: F-57938r849321_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Generate security audits to include only the following accounts or groups: - Local Service - Network Service

b
Windows Server 2022 impersonate a client after authentication user right must only be assigned to Administrators, Service, Local Service, and Network Service.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-UR-000130
Vuln IDs
V-254503
Rule IDs
SV-254503r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Impersonate a client after authentication" user right allows a program to impersonate another user or account to run on their behalf. An attacker could use this to elevate privileges.
Fix: F-57939r849324_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Impersonate a client after authentication to include only the following accounts or groups: - Administrators - Service - Local Service - Network Service

b
Windows Server 2022 increase scheduling priority: user right must only be assigned to the Administrators group.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-UR-000140
Vuln IDs
V-254504
Rule IDs
SV-254504r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Increase scheduling priority" user right can change a scheduling priority, causing performance issues or a denial of service.
Fix: F-57940r849327_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Increase scheduling priority to include only the following accounts or groups: - Administrators

b
Windows Server 2022 load and unload device drivers user right must only be assigned to the Administrators group.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-UR-000150
Vuln IDs
V-254505
Rule IDs
SV-254505r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Load and unload device drivers" user right allows a user to load device drivers dynamically on a system. This could be used by an attacker to install malicious code.
Fix: F-57941r849330_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Load and unload device drivers to include only the following accounts or groups: - Administrators

b
Windows Server 2022 lock pages in memory user right must not be assigned to any groups or accounts.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-UR-000160
Vuln IDs
V-254506
Rule IDs
SV-254506r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Lock pages in memory" user right allows physical memory to be assigned to processes, which could cause performance issues or a denial of service. Satisfies: SRG-OS-000324-GPOS-00125, SRG-OS-000433-GPOS-00193
Fix: F-57942r849333_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Lock pages in memory to be defined but containing no entries (blank).

b
Windows Server 2022 manage auditing and security log user right must only be assigned to the Administrators group.
RMF Control
AU-9
Severity
Medium
CCI
CCI-000162
Version
WN22-UR-000170
Vuln IDs
V-254507
Rule IDs
SV-254507r849337_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Manage auditing and security log" user right can manage the security log and change auditing configurations. This could be used to clear evidence of tampering. Satisfies: SRG-OS-000057-GPOS-00027, SRG-OS-000058-GPOS-00028, SRG-OS-000059-GPOS-00029, SRG-OS-000063-GPOS-00032, SRG-OS-000337-GPOS-00129
Fix: F-57943r849336_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Manage auditing and security log to include only the following accounts or groups: - Administrators

b
Windows Server 2022 modify firmware environment values user right must only be assigned to the Administrators group.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-UR-000180
Vuln IDs
V-254508
Rule IDs
SV-254508r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Modify firmware environment values" user right can change hardware configuration environment variables. This could result in hardware failures or a denial of service.
Fix: F-57944r849339_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Modify firmware environment values to include only the following accounts or groups: - Administrators

b
Windows Server 2022 perform volume maintenance tasks user right must only be assigned to the Administrators group.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-UR-000190
Vuln IDs
V-254509
Rule IDs
SV-254509r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Perform volume maintenance tasks" user right can manage volume and disk configurations. This could be used to delete volumes, resulting in data loss or a denial of service.
Fix: F-57945r849342_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Perform volume maintenance tasks to include only the following accounts or groups: - Administrators

b
Windows Server 2022 profile single process user right must only be assigned to the Administrators group.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-UR-000200
Vuln IDs
V-254510
Rule IDs
SV-254510r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Profile single process" user right can monitor nonsystem processes performance. An attacker could use this to identify processes to attack.
Fix: F-57946r849345_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Profile single process to include only the following accounts or groups: - Administrators

b
Windows Server 2022 restore files and directories user right must only be assigned to the Administrators group.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-UR-000210
Vuln IDs
V-254511
Rule IDs
SV-254511r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Restore files and directories" user right can circumvent file and directory permissions and could allow access to sensitive data. It could also be used to overwrite more current data.
Fix: F-57947r849348_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Restore files and directories to include only the following accounts or groups: - Administrators

b
Windows Server 2022 take ownership of files or other objects user right must only be assigned to the Administrators group.
RMF Control
AC-6
Severity
Medium
CCI
CCI-002235
Version
WN22-UR-000220
Vuln IDs
V-254512
Rule IDs
SV-254512r877392_rule
Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Take ownership of files or other objects" user right can take ownership of objects and make changes.
Fix: F-57948r849351_fix

Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Take ownership of files or other objects to include only the following accounts or groups: - Administrators